Re: FUSB200 xhci issue

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Sunday, July 28, 2013 04:28:25 PM Oleksij Rempel wrote:
> Am 28.07.2013 14:12, schrieb Oleksij Rempel:
> > Am 28.07.2013 13:38, schrieb Christian Lamparter:
> >
> >>>>
> >>>> Anyway, I tried the -next branch.
> >>>>
> >>>> commit dbbb809d592dde0b3c9ecb97b3b387ff8e40e799
> >>>> Author: Oleksij Rempel <linux@xxxxxxxxxxxxxxxx>
> >>>> Date:   Wed Jul 24 10:26:18 2013 +0200
> >>>>
> >>>>       k2_fw_usb_api: workaround for EP4 bug.
> >>>>
> >>>> but still, the device won't show up after autosuspend.
> >>>
> >>> Hm... firmware probably didn't rebooted before suspend. Did interface
> >>> was up, before autosuspend? If no, you need latest wireles-testing -
> >>> there are patches to handle this issue. Or just make "ifconfig wlan1 up"
> >>>    before  rmmod.
> >> Oh, I it was on the latest wireless-testing. (And the "ath9k_htc" module
> >> had the patch "ath9k_htc: reboot firmwware if it was loaded").
> >>
> >> Furthermore, I did the same test with one of the ehci-only ports
> >> and it worked. Both, devices (one had a AR7015, the other a AR9271)
> >> came back after autosuspend there.
> >
> > Grrr... so it brings us back to xhci issue. Even EP4 workaround wont
> > work here :( Suddenly i have no more ideas.
> >
> > Sarah, it's your turn now.
> 
> Christian,
> can you please provide some more info about your xhci controller. I'll 
> try to get me same.

Well, it's a laptop (HP DV6-6003EG). I recon that getting 100% the
same setup will be difficult. However, since the uPD720200 was/is
very popular, it should be very easy to find one. [It's probably
on all of these "10 euro usb-3.0 pcie-adapters". So as long as you
got a free 1x-pcie port you should be good.]

Here's the lspci summary:

19:00.0 USB controller [0c03]: NEC Corporation uPD720200 USB 3.0 Host Controller [1033:0194] (rev 04) (prog-if 30 [XHCI])
        Subsystem: Hewlett-Packard Company Device [103c:1657]
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0, Cache Line Size: 64 bytes
        Interrupt: pin A routed to IRQ 19
        Region 0: Memory at d3400000 (64-bit, non-prefetchable) [size=8K]
        Capabilities: <access denied>
        Kernel driver in use: xhci_hcd

Regards,
	Chr
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Linux Media]     [Linux Input]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Old Linux USB Devel Archive]

  Powered by Linux