This patch defines a new trace event, which is called xhci_dbg_reset_ep
and belongs in the event class xhci_log_msg, and adds tracepoints that
trace the debug messages associated with resetting an endpoint after
the reception of a STALL packet.
Signed-off-by: Xenia Ragiadakou <burzalodowa@xxxxxxxxx>
---
drivers/usb/host/xhci-ring.c | 3 ++-
drivers/usb/host/xhci-trace.h | 5 +++++
drivers/usb/host/xhci.c | 17 +++++++++++------
3 files changed, 18 insertions(+), 7 deletions(-)
diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c
index 451fece..08849ac 100644
--- a/drivers/usb/host/xhci-ring.c
+++ b/drivers/usb/host/xhci-ring.c
@@ -1151,7 +1151,8 @@ static void handle_reset_ep_completion(struct xhci_hcd *xhci,
/* This command will only fail if the endpoint wasn't halted,
* but we don't care.
*/
- xhci_dbg(xhci, "Ignoring reset ep completion code of %u\n",
+ xhci_dbg_trace(xhci, trace_xhci_dbg_reset_ep,
+ "Ignoring reset ep completion code of %u",
GET_COMP_CODE(le32_to_cpu(event->status)));
/* HW with the reset endpoint quirk needs to have a configure endpoint
diff --git a/drivers/usb/host/xhci-trace.h b/drivers/usb/host/xhci-trace.h
index f0447c6..757b26f 100644
--- a/drivers/usb/host/xhci-trace.h
+++ b/drivers/usb/host/xhci-trace.h
@@ -46,6 +46,11 @@ DEFINE_EVENT(xhci_log_msg, xhci_dbg_quirks,
TP_ARGS(vaf)
);
+DEFINE_EVENT(xhci_log_msg, xhci_dbg_reset_ep,
+ TP_PROTO(struct va_format *vaf),
+ TP_ARGS(vaf)
+);
+
#endif /* __XHCI_TRACE_H */
/* this part must be outside header guard */
diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c
index e639c8b..957d563 100644
--- a/drivers/usb/host/xhci.c
+++ b/drivers/usb/host/xhci.c
@@ -2816,7 +2816,8 @@ void xhci_cleanup_stalled_ring(struct xhci_hcd *xhci,
struct xhci_dequeue_state deq_state;
struct xhci_virt_ep *ep;
- xhci_dbg(xhci, "Cleaning up stalled endpoint ring\n");
+ xhci_dbg_trace(xhci, trace_xhci_dbg_reset_ep,
+ "Cleaning up stalled endpoint ring");
ep = &xhci->devs[udev->slot_id]->eps[ep_index];
/* We need to move the HW's dequeue pointer past this TD,
* or it will attempt to resend it on the next doorbell ring.
@@ -2829,7 +2830,8 @@ void xhci_cleanup_stalled_ring(struct xhci_hcd *xhci,
* issue a configure endpoint command later.
*/
if (!(xhci->quirks & XHCI_RESET_EP_QUIRK)) {
- xhci_dbg(xhci, "Queueing new dequeue state\n");
+ xhci_dbg_trace(xhci, trace_xhci_dbg_reset_ep,
+ "Queueing new dequeue state");
xhci_queue_new_dequeue_state(xhci, udev->slot_id,
ep_index, ep->stopped_stream, &deq_state);
} else {
@@ -2872,16 +2874,19 @@ void xhci_endpoint_reset(struct usb_hcd *hcd,
ep_index = xhci_get_endpoint_index(&ep->desc);
virt_ep = &xhci->devs[udev->slot_id]->eps[ep_index];
if (!virt_ep->stopped_td) {
- xhci_dbg(xhci, "Endpoint 0x%x not halted, refusing to reset.\n",
- ep->desc.bEndpointAddress);
+ xhci_dbg_trace(xhci, trace_xhci_dbg_reset_ep,
+ "Endpoint 0x%x not halted, refusing to reset.",
+ ep->desc.bEndpointAddress);
return;
}
if (usb_endpoint_xfer_control(&ep->desc)) {
- xhci_dbg(xhci, "Control endpoint stall already handled.\n");
+ xhci_dbg_trace(xhci, trace_xhci_dbg_reset_ep,
+ "Control endpoint stall already handled.");
return;
}
- xhci_dbg(xhci, "Queueing reset endpoint command\n");
+ xhci_dbg_trace(xhci, trace_xhci_dbg_reset_ep,
+ "Queueing reset endpoint command");
spin_lock_irqsave(&xhci->lock, flags);
ret = xhci_queue_reset_ep(xhci, udev->slot_id, ep_index);
/*
--
1.8.3.2
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
