Linux USB Users
[Prev Page][Next Page]
- [PATCH] usb: phy-tegra-usb.c: wrong pointer check for remap UTMI
- From: Chris Ruehl <chris.ruehl@xxxxxxxxxxxx>
- Re: [PATCH 7/7] usb: phy-tegra-usb.c: wrong pointer check for remap UTMI
- From: Chris Ruehl <chris.ruehl@xxxxxxxxxxxx>
- [PATCH 7/7] usb: phy-tegra-usb.c: wrong pointer check for remap UTMI
- From: Chris Ruehl <chris.ruehl@xxxxxxxxxxxx>
- [PATCH 1/3 v5] usb: chipidea: Reallocate regmap only if lpm is detected
- From: Chris Ruehl <chris.ruehl@xxxxxxxxxxxx>
- [PATCH 2/3 v5] Fix Internal error: : 808 [#1] ARM related to STS flag
- From: Chris Ruehl <chris.ruehl@xxxxxxxxxxxx>
- [PATCH 3/3 v5] usb: chipidea: put hw_phymode_configure before ci_usb_phy_init
- From: Chris Ruehl <chris.ruehl@xxxxxxxxxxxx>
- Re: Xhci Host not allowed to send get device desc at addr zero
- From: Dan Williams <dan.j.williams@xxxxxxxxx>
- RE: [PATCH v3 10/10] usb: chipidea: imx: Enable CI_HDRC_IMX_EHCI_QUIRK
- From: Peter Chen <Peter.Chen@xxxxxxxxxxxxx>
- Re: [PATCH 1/3 v4] usb: chipidea: Reallocate regmap only if lpm is detected
- From: Chris Ruehl <chris.ruehl@xxxxxxxxxxxx>
- RE: [PATCH v3 00/10] Add power management support for chipidea
- From: Peter Chen <Peter.Chen@xxxxxxxxxxxxx>
- Re: xHCI quirk increases module load time
- From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
- [PATCH] usb: core: Abort deauthorization if unsetting configuration fails
- From: Julius Werner <jwerner@xxxxxxxxxxxx>
- Re: [Application RFC PATCH] ptp-gadget: move from gadgetfs to functionfs
- From: Detlev Zundel <dzu@xxxxxxx>
- Re: [xhci:for-usb-linus 1/1] drivers/usb/host/xhci-ring.c:3014:33: sparse: incorrect type in assignment (different base types)
- From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
- Re: [PATCH v6 5/5] usb: dwc3: implement gadget's quirk ep_out_align_size
- From: David Cohen <david.a.cohen@xxxxxxxxxxxxxxx>
- Re: [PATCH v3 10/10] usb: chipidea: imx: Enable CI_HDRC_IMX_EHCI_QUIRK
- From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
- [PATCH 2/2] usb: hcd: Initialize USB phy if needed
- From: Valentine Barshak <valentine.barshak@xxxxxxxxxxxxxxxxxx>
- [PATCH 1/2] usb: hcd: Remove USB phy if needed
- From: Valentine Barshak <valentine.barshak@xxxxxxxxxxxxxxxxxx>
- [V3 PATCH 0/2] Defer HCD init until the external PHY, bound to the HCD is ready
- From: Valentine Barshak <valentine.barshak@xxxxxxxxxxxxxxxxxx>
- Re: xHCI quirk increases module load time
- From: Greg KH <greg@xxxxxxxxx>
- Re: xHCI quirk increases module load time
- From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
- Re: Strange behavior with ZTE MF821D (and possible other MDM9200 devices)
- From: Kristian Evensen <kristian.evensen@xxxxxxxxx>
- Re: xHCI quirk increases module load time
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- xHCI quirk increases module load time
- From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
- Re: Strange behavior with ZTE MF821D (and possible other MDM9200 devices)
- From: Markus Gothe <nietzsche@xxxxxxxxxxxxxx>
- [PATCH] usb: serial: zte_ev: move support for ZTE AC2726 from zte_ev back to option
- From: Dmitry Kunilov <dmitry.kunilov@xxxxxxxxx>
- Re: zte_ev not properly handling ZTE AC2726 CDMA modems
- From: Dmitry Kunilov <dmitry.kunilov@xxxxxxxxx>
- Re: [PATCH 2/2] usb: hcd: Initialize USB phy if needed
- From: Greg KH <greg@xxxxxxxxx>
- Re: [finished PATCH 20/21] usb: kill DEBUG compile option
- From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
- Re: phy-tegra-usb.c: wrong pointer check for remap UTMI
- From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH v3 00/10] Add power management support for chipidea
- From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
- [PATCH v2 2/4] usb: ohci-at91: replace request_mem_region + ioremap by devm_request_and_ioremap
- From: Boris BREZILLON <b.brezillon@xxxxxxxxxxx>
- [PATCH v2 4/4] usb: ohci-at91: use device managed clk retrieval
- From: Boris BREZILLON <b.brezillon@xxxxxxxxxxx>
- Re: Xhci Host not allowed to send get device desc at addr zero
- From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
- [PATCH v2 3/4] usb: ohci-at91: use dev variable instead of &pdev->dev
- From: Boris BREZILLON <b.brezillon@xxxxxxxxxxx>
- [PATCH v2 1/4] usb: ohci-at91: fix irq and iomem resource retrieval
- From: Boris BREZILLON <b.brezillon@xxxxxxxxxxx>
- [PATCH v2 0/4] usb: ohci-at91: various fixes and improvements
- From: Boris BREZILLON <b.brezillon@xxxxxxxxxxx>
- Re: [PATCH 3/3] usb: ohci-at91: use device managed clk retrieval
- From: boris brezillon <b.brezillon@xxxxxxxxxxx>
- Re: [PATCH 3/3] usb: ohci-at91: use device managed clk retrieval
- From: Sergei Shtylyov <sergei.shtylyov@xxxxxxxxxxxxxxxxxx>
- Re: zte_ev not properly handling ZTE AC2726 CDMA modems
- From: Dan Williams <dcbw@xxxxxxxxxx>
- Re: [PATCH v5 14/16] usb/gadget: g_ffs: convert to new interface of f_fs
- From: Michal Nazarewicz <mina86@xxxxxxxxxx>
- Re: [PATCH v5 12/16] usb/gadget: FunctionFS: add devices management code
- From: Michal Nazarewicz <mina86@xxxxxxxxxx>
- Re: [PATCH 3/3] usb: ohci-at91: use device managed clk retrieval
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: some question about EXDEV status in period schedule
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: xhci regression: usb 3.0 hdd disconnects immediately
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: [3.8-rc3 -> 3.8-rc4 regression] Re: [PATCH] module, async: async_synchronize_full() on module init iff async is used
- From: Tejun Heo <tj@xxxxxxxxxx>
- Re: Strange behavior with ZTE MF821D (and possible other MDM9200 devices)
- From: Kristian Evensen <kristian.evensen@xxxxxxxxx>
- [PATCH 1/3] usb: ohci-at91: fix irq and iomem resource retrieval
- From: Boris BREZILLON <b.brezillon@xxxxxxxxxxx>
- [PATCH 0/3] usb: ohci-at91: various fixes and improvements
- From: Boris BREZILLON <b.brezillon@xxxxxxxxxxx>
- Re: [PATCH] USB: switch maintainership of chipidea to Peter
- From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
- Re: Strange behavior with ZTE MF821D (and possible other MDM9200 devices)
- From: Bjørn Mork <bjorn@xxxxxxx>
- Re: [3.8-rc3 -> 3.8-rc4 regression] Re: [PATCH] module, async: async_synchronize_full() on module init iff async is used
- From: Josh Hunt <joshhunt00@xxxxxxxxx>
- [PATCH v2 0/3] ARM: OMAP2+: USB Host bug fixes for 3.13 rc
- From: Roger Quadros <rogerq@xxxxxx>
- [PATCH 3/3] ARM: OMAP3: hwmod data: Don't prevent RESET of USB Host module
- From: Roger Quadros <rogerq@xxxxxx>
- RE: [PATCH 3/3 v4] usb: chipidea: hw_phymode_configure moved before ci_usb_phy_init
- From: Peter Chen <Peter.Chen@xxxxxxxxxxxxx>
- [PATCH 1/3] ARM: OMAP4+: hwmod data: Don't prevent RESET of USB Host module
- From: Roger Quadros <rogerq@xxxxxx>
- [PATCH 2/3] ARM: OMAP2+: hwmod: Fix RESET logic
- From: Roger Quadros <rogerq@xxxxxx>
- [PATCH 2/3] usb: ohci-at91: replace request_mem_region + ioremap by devm_request_and_ioremap
- From: Boris BREZILLON <b.brezillon@xxxxxxxxxxx>
- Re: [PATCH] USB: switch maintainership of chipidea to Peter
- From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
- Re: 答复: Re: 答复: Re: 答复: Re: 答复: Re: 【PATCH】USB:add new zte 3g-modem's pid to option.c
- From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
- [PATCH v5 12/16] usb/gadget: FunctionFS: add devices management code
- From: Andrzej Pietrasiewicz <andrzej.p@xxxxxxxxxxx>
- [PATCH v5 13/16] usb/gadget: FunctionFS: convert to new function interface with backward compatibility
- From: Andrzej Pietrasiewicz <andrzej.p@xxxxxxxxxxx>
- [PATCH v5 09/16] usb/gadget: rndis: merge u_rndis.ko with usb_f_rndis.ko
- From: Andrzej Pietrasiewicz <andrzej.p@xxxxxxxxxxx>
- [PATCH v5 08/16] usb/gadget: f_rndis: remove compatibility layer
- From: Andrzej Pietrasiewicz <andrzej.p@xxxxxxxxxxx>
- [PATCH v5 15/16] usb/gadget: FunctionFS: Remove compatibility layer
- From: Andrzej Pietrasiewicz <andrzej.p@xxxxxxxxxxx>
- [PATCH v5 14/16] usb/gadget: g_ffs: convert to new interface of f_fs
- From: Andrzej Pietrasiewicz <andrzej.p@xxxxxxxxxxx>
- [PATCH v5 11/16] usb/gadget: FunctionFS: create utility file
- From: Andrzej Pietrasiewicz <andrzej.p@xxxxxxxxxxx>
- [PATCH v5 10/16] usb/gadget: FunctionFS: Remove VLAIS usage from gadget code
- From: Andrzej Pietrasiewicz <andrzej.p@xxxxxxxxxxx>
- Re: [PATCH 3/3] usb: ohci-at91: use device managed clk retrieval
- From: Nicolas Ferre <nicolas.ferre@xxxxxxxxx>
- [PATCH v5 04/16] usb/gadget: f_ecm: remove compatibility layer
- From: Andrzej Pietrasiewicz <andrzej.p@xxxxxxxxxxx>
- [PATCH v5 16/16] usb/gadget: FunctionFS: add configfs support
- From: Andrzej Pietrasiewicz <andrzej.p@xxxxxxxxxxx>
- [PATCH v5 02/16] usb/gadget: g_ffs: remove a reduntant gfs_ether_setup variable
- From: Andrzej Pietrasiewicz <andrzej.p@xxxxxxxxxxx>
- [PATCH v5 07/16] usb/gadget: g_ffs: convert to new interface of f_rndis
- From: Andrzej Pietrasiewicz <andrzej.p@xxxxxxxxxxx>
- [PATCH v5 05/16] usb/gadget: g_ffs: convert to new interface of f_subset
- From: Andrzej Pietrasiewicz <andrzej.p@xxxxxxxxxxx>
- [PATCH v5 06/16] usb/gadget: f_subset: remove compatibility layer
- From: Andrzej Pietrasiewicz <andrzej.p@xxxxxxxxxxx>
- [PATCH v5 01/16] usb/gadget: configfs: allow setting function instance's name
- From: Andrzej Pietrasiewicz <andrzej.p@xxxxxxxxxxx>
- [PATCH v5 03/16] usb/gadget: g_ffs: convert to new interface of f_ecm
- From: Andrzej Pietrasiewicz <andrzej.p@xxxxxxxxxxx>
- [PATCH v5 00/16] Equivalent of g_ffs with configfs
- From: Andrzej Pietrasiewicz <andrzej.p@xxxxxxxxxxx>
- Re: [PATCH 2/3] usb: ohci-at91: replace request_mem_region + ioremap by devm_request_and_ioremap
- From: Nicolas Ferre <nicolas.ferre@xxxxxxxxx>
- Re: [PATCH v2 2/7] usb: dwc3: adapt dwc3 core to use Generic PHY Framework
- From: Kishon Vijay Abraham I <kishon@xxxxxx>
- Re: [PATCH 1/3] usb: ohci-at91: fix irq and iomem resource retrieval
- From: Nicolas Ferre <nicolas.ferre@xxxxxxxxx>
- RE: [PATCH v4 02/17] usb: phy-mxs: Add platform judgement code
- From: Peter Chen <Peter.Chen@xxxxxxxxxxxxx>
- [PATCH 3/3] usb: ohci-at91: use device managed clk retrieval
- From: Boris BREZILLON <b.brezillon@xxxxxxxxxxx>
- Re: [PATCH] USB: switch maintainership of chipidea to Peter
- From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
- RE: [PATCH 1/3 v4] usb: chipidea: Reallocate regmap only if lpm is detected
- From: Peter Chen <Peter.Chen@xxxxxxxxxxxxx>
- RE: [PATCH] USB: switch maintainership of chipidea to Peter
- From: Peter Chen <Peter.Chen@xxxxxxxxxxxxx>
- Re: [PATCH] Added support for the Lenovo RD02-D400 USB Modem
- From: Sergei Shtylyov <sergei.shtylyov@xxxxxxxxxxxxxxxxxx>
- [PATCH] Added support for the Lenovo RD02-D400 USB Modem
- From: David Cluytens <david.cluytens@xxxxxxxxx>
- Re: [PATCH] USB: switch maintainership of chipidea to Peter
- From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
- Re: [PATCH] USB: switch maintainership of chipidea to Peter
- From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
- [PATCH] Added support for the Lenovo RD02-D400 USB Modem
- From: David Cluytens <david.cluytens@xxxxxxxxx>
- Strange behavior with ZTE MF821D (and possible other MDM9200 devices)
- From: Kristian Evensen <kristian.evensen@xxxxxxxxx>
- Re: [PATCH v2 2/7] usb: dwc3: adapt dwc3 core to use Generic PHY Framework
- From: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
- Re: [PATCH] USB: switch maintainership of chipidea to Peter
- From: Alexander Shishkin <alexander.shishkin@xxxxxxxxxxxxxxx>
- Re: [PATCH 1/3 v4] usb: chipidea: Reallocate regmap only if lpm is detected
- From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
- Re: [PATCH] ARM: dts: omap3-beagle: Fix USB host on beagle boards (for 3.13)
- From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
- Re: [PATCH v2 1/7] usb: dwc3: get "usb_phy" only if the platform indicates the presence of PHY's
- From: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
- Re: [PATCH v4 02/17] usb: phy-mxs: Add platform judgement code
- From: Michael Grzeschik <mgr@xxxxxxxxxxxxxx>
- Re: [PATCH v2 1/7] usb: dwc3: get "usb_phy" only if the platform indicates the presence of PHY's
- From: Kishon Vijay Abraham I <kishon@xxxxxx>
- RE: [PATCH v4 17/17] usb: phy-mxs: do not set PWD.RXPWD1PT1 for low speed connection
- From: Peter Chen <Peter.Chen@xxxxxxxxxxxxx>
- Re: [PATCH 1/1] mfd: omap-usb-host: Fix USB device detection problems on OMAP4 Panda
- From: Roger Quadros <rogerq@xxxxxx>
- Re: [PATCH] ARM: dts: omap3-beagle: Fix USB host on beagle boards (for 3.13)
- From: Roger Quadros <rogerq@xxxxxx>
- Re: [PATCH v4 17/17] usb: phy-mxs: do not set PWD.RXPWD1PT1 for low speed connection
- From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
- RE: [PATCH v4 17/17] usb: phy-mxs: do not set PWD.RXPWD1PT1 for low speed connection
- From: Peter Chen <Peter.Chen@xxxxxxxxxxxxx>
- Re: [PATCH v4 17/17] usb: phy-mxs: do not set PWD.RXPWD1PT1 for low speed connection
- From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
- RE: [PATCH v4 09/17] usb: phy-mxs: Enable IC fixes for related SoCs
- From: Peter Chen <Peter.Chen@xxxxxxxxxxxxx>
- Re: [PATCH 2/2] Indent with tab instead of spaces.
- From: Oliver Neukum <oliver@xxxxxxxxxx>
- Re: [PATCH v4 09/17] usb: phy-mxs: Enable IC fixes for related SoCs
- From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
- Re: [PATCH v4 16/17] usb: phy-mxs: fix the problem by only using 1st controller's register
- From: Peter Chen <peter.chen@xxxxxxxxxxxxx>
- Re: [PATCH v4 02/17] usb: phy-mxs: Add platform judgement code
- From: Peter Chen <peter.chen@xxxxxxxxxxxxx>
- Re: [PATCH v4 02/17] usb: phy-mxs: Add platform judgement code
- From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
- RE: [PATCH v4 09/17] usb: phy-mxs: Enable IC fixes for related SoCs
- From: Peter Chen <Peter.Chen@xxxxxxxxxxxxx>
- Re: [PATCH v4 16/17] usb: phy-mxs: fix the problem by only using 1st controller's register
- From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
- Re: [PATCH v4 09/17] usb: phy-mxs: Enable IC fixes for related SoCs
- From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
- Re: [PATCH 3/3] usb: phy-generic: Add ULPI VBUS support
- From: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
- [PATCH v4 15/17] usb: phy-mxs: add controller id
- From: Peter Chen <peter.chen@xxxxxxxxxxxxx>
- [PATCH v4 17/17] usb: phy-mxs: do not set PWD.RXPWD1PT1 for low speed connection
- From: Peter Chen <peter.chen@xxxxxxxxxxxxx>
- [PATCH v4 16/17] usb: phy-mxs: fix the problem by only using 1st controller's register
- From: Peter Chen <peter.chen@xxxxxxxxxxxxx>
- [PATCH v4 07/17] usb: phy: add notify suspend and resume callback
- From: Peter Chen <peter.chen@xxxxxxxxxxxxx>
- [PATCH v4 05/17] ARM: dts: imx6: add anatop phandle for usbphy
- From: Peter Chen <peter.chen@xxxxxxxxxxxxx>
- [PATCH v4 14/17] ARM: dts: imx: add mxs phy controller id
- From: Peter Chen <peter.chen@xxxxxxxxxxxxx>
- [PATCH v4 13/17] usb: phy-mxs: Add sync time after controller clear phcd
- From: Peter Chen <peter.chen@xxxxxxxxxxxxx>
- [PATCH v4 12/17] usb: phy-mxs: Add system suspend/resume API
- From: Peter Chen <peter.chen@xxxxxxxxxxxxx>
- [PATCH v4 11/17] usb: phy-mxs: Add implementation of set_wakeup
- From: Peter Chen <peter.chen@xxxxxxxxxxxxx>
- [PATCH v4 10/17] usb: phy: Add set_wakeup API
- From: Peter Chen <peter.chen@xxxxxxxxxxxxx>
- [PATCH v4 06/17] usb: phy-mxs: Add anatop regmap
- From: Peter Chen <peter.chen@xxxxxxxxxxxxx>
- [PATCH v4 08/17] usb: phy-mxs: Add implementation of nofity_suspend and notify_resume
- From: Peter Chen <peter.chen@xxxxxxxxxxxxx>
- [PATCH v4 09/17] usb: phy-mxs: Enable IC fixes for related SoCs
- From: Peter Chen <peter.chen@xxxxxxxxxxxxx>
- [PATCH v4 04/17] usb: doc: phy-mxs: update binding for adding anatop phandle
- From: Peter Chen <peter.chen@xxxxxxxxxxxxx>
- [PATCH v4 03/17] usb: phy-mxs: Add auto clock and power setting
- From: Peter Chen <peter.chen@xxxxxxxxxxxxx>
- [PATCH v4 02/17] usb: phy-mxs: Add platform judgement code
- From: Peter Chen <peter.chen@xxxxxxxxxxxxx>
- [PATCH v4 01/17] usb: doc: phy-mxs: Add more compatible strings
- From: Peter Chen <peter.chen@xxxxxxxxxxxxx>
- [PATCH v4 00/17] Add power management support for mxs phy
- From: Peter Chen <peter.chen@xxxxxxxxxxxxx>
- [PATCH 3/3 v4] usb: chipidea: hw_phymode_configure moved before ci_usb_phy_init
- From: Chris Ruehl <chris.ruehl@xxxxxxxxxxxx>
- [PATCH 2/3 v4] Fix Internal error: : 808 [#1] ARM related to STS flag
- From: Chris Ruehl <chris.ruehl@xxxxxxxxxxxx>
- [PATCH 1/3 v4] usb: chipidea: Reallocate regmap only if lpm is detected
- From: Chris Ruehl <chris.ruehl@xxxxxxxxxxxx>
- Re: [PATCH 2/2] ARM: dts: imx6q-udoo: Add USB host support
- From: Shawn Guo <shawn.guo@xxxxxxxxxx>
- Re: [PATCH] USB: switch maintainership of chipidea to Peter
- From: Peter Chen <peter.chen@xxxxxxxxxxxxx>
- Re: zte_ev not properly handling ZTE AC2726 CDMA modems
- From: "'Greg KH'" <gregkh@xxxxxxxxxxxxxxxxxxx>
- Re: [GIT PULL] xhci: Cleanup for 3.14: Sparse fixes, replace xhci_read/write, misc
- From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH 3/3] usb: phy-generic: Add ULPI VBUS support
- From: Chris Ruehl <chris.ruehl@xxxxxxxxxxxx>
- Re: [PATCH] ARM: dts: omap3-beagle: Fix USB host on beagle boards (for 3.13)
- From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
- Re: [PATCH] USB: switch maintainership of chipidea to Peter
- From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH] USB: switch maintainership of chipidea to Peter
- From: Peter Chen <peter.chen@xxxxxxxxxxxxx>
- Re: some question about EXDEV status in period schedule
- From: yoma sophian <sophian.yoma@xxxxxxxxx>
- Re: [PATCH 3/3] usb: phy-generic: Add ULPI VBUS support
- From: Chris Ruehl <chris.ruehl@xxxxxxxxxxxx>
- Re: 答复: Re: 答复: Re: 答复: Re: 【PATCH】USB:add new zte 3g-modem's pid to option.c
- From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
- [PATCH] USB: switch maintainership of chipidea to Peter
- From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH 3/5] USB: xHCI: use DEFINE_PCI_DEVICE_TABLE macro
- From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
- Re: xhci regression: usb 3.0 hdd disconnects immediately
- From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
- [PATCH 31/39] USB: remove DEFINE_PCI_DEVICE_TABLE macro
- From: Jingoo Han <jg1.han@xxxxxxxxxxx>
- Re: [PATCH 3/5] USB: xHCI: use DEFINE_PCI_DEVICE_TABLE macro
- From: Jingoo Han <jg1.han@xxxxxxxxxxx>
- Re: cdc_acm crash with multiple USB modems
- From: Oliver Neukum <oliver@xxxxxxxxxx>
- Re: [PATCH 3/5] USB: xHCI: use DEFINE_PCI_DEVICE_TABLE macro
- From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
- [PATCH 03/15] xhci: fix derivation of TRB's DMA address in xhci_log_event Trace Event Class
- From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
- [PATCH 07/15] xhci: fix SCT_FOR_CTX(p) macro
- From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
- [PATCH 12/15] xhci: replace xhci_readl() with readl()
- From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
- [PATCH 15/15] xhci: replace xhci_write_64() with writeq()
- From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
- [PATCH 11/15] xhci: remove conversion from generic to pci device in xhci_mem.c
- From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
- [PATCH 10/15] xhci: fix incorrect type in assignment in xhci_count_num_dropped_endpoints()
- From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
- [PATCH 05/15] xhci: fix incorrect type in assignment in xhci_address_device()
- From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
- [PATCH 09/15] xhci: fix incorrect type in assignment in xhci_count_num_new_endpoints()
- From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
- [PATCH 04/15] xhci: fix sparse warning in xhci-trace.h
- From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
- [PATCH 08/15] xhci: remove unnecessary check in xhci_free_stream_info()
- From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
- [GIT PULL] xhci: Cleanup for 3.14: Sparse fixes, replace xhci_read/write, misc
- From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
- [PATCH 06/15] xhci: replace USB_MAXINTERFACES with config->desc.bNumInterface
- From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
- [PATCH 14/15] xhci: replace xhci_read_64() with readq()
- From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
- [PATCH 02/15] xhci: fix incorrect type in assignment in handle_device_notification()
- From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
- [PATCH 13/15] xhci: replace xhci_writel() with writel()
- From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
- [PATCH 01/15] xhci: convert TRB_CYCLE to le32 before using it to set Link TRB's cycle bit
- From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
- RE: Staff and Faculty Mailbox Access Message !
- From: "Camp, Jean" <jcamp@xxxxxxxx>
- test-feedback: more problems with 3.13 than with 3.12 using mbim at K5150-surfstick
- From: Thomas Schäfer <tschaefer@xxxxxxxxxxx>
- Re: [PATCH 0/3] usb: wusbcore: connect/disconnect fixes
- From: Thomas Pugliese <thomas.pugliese@xxxxxxxxx>
- Re: [PATCH 0/3] usb: wusbcore: connect/disconnect fixes
- From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH] usb: xhci-plat: Enable USB 2.0 hardware LPM support for platform xHCs
- From: Julius Werner <jwerner@xxxxxxxxxxxx>
- Re: 答复: Re: 答复: Re: 【PATCH】USB:add new zte 3g-modem's pid to option.c
- From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCHv4] USB: serial: option: add support for Huawei E173s-6
- From: Greg KH <greg@xxxxxxxxx>
- Re: [GIT PULL] xhci: Big-endian sparse fixes.
- From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
- Re: [GIT PULL] xhci: Regression fix for 3.13.
- From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
- [PATCH 2/3] usb: wusbcore: do device lookup while holding the hc mutex
- From: Thomas Pugliese <thomas.pugliese@xxxxxxxxx>
- [PATCH 3/3] usb: wusbcore: fix deadlock in wusbhc_gtk_rekey
- From: Thomas Pugliese <thomas.pugliese@xxxxxxxxx>
- [PATCH 1/3] usb: wusbcore: send keepalives to unauthenticated devices
- From: Thomas Pugliese <thomas.pugliese@xxxxxxxxx>
- [PATCH 0/3] usb: wusbcore: connect/disconnect fixes
- From: Thomas Pugliese <thomas.pugliese@xxxxxxxxx>
- [PATCH 1/1] usb: xhci: Link TRB must not occur within a USB payload burst
- From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
- [GIT PULL] xhci: Regression fix for 3.13.
- From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
- Re: zte_ev not properly handling ZTE AC2726 CDMA modems
- From: Dmitry Kunilov <dmitry.kunilov@xxxxxxxxx>
- Re: cdc_acm crash with multiple USB modems
- From: Johan Hovold <jhovold@xxxxxxxxx>
- Re: net/usb/ax88179_178a driver broken in linux-3.12
- From: Greg KH <greg@xxxxxxxxx>
- Re: net/usb/ax88179_178a driver broken in linux-3.12
- From: Mark Lord <mlord@xxxxxxxxx>
- Re: net/usb/ax88179_178a driver broken in linux-3.12
- From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
- Re: [PATCH v4 16/16] usb/gadget: FunctionFS: add configfs support
- From: Michal Nazarewicz <mina86@xxxxxxxxxx>
- Re: [PATCH v4 15/16] usb/gadget: FunctionFS: Remove compatibility layer
- From: Michal Nazarewicz <mina86@xxxxxxxxxx>
- Re: [PATCH v4 14/16] usb/gadget: g_ffs: convert to new interface of f_fs
- From: Michal Nazarewicz <mina86@xxxxxxxxxx>
- Re: [GIT PULL] xhci: Big-endian sparse fixes.
- From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
- Re: [PATCH v6 5/5] usb: dwc3: implement gadget's quirk ep_out_align_size
- From: David Cohen <david.a.cohen@xxxxxxxxxxxxxxx>
- Re: [PATCH 3/3] usb: phy-generic: Add ULPI VBUS support
- From: Mark Rutland <mark.rutland@xxxxxxx>
- Re: [PATCH 2/2] Indent with tab instead of spaces.
- From: Sergei Shtylyov <sergei.shtylyov@xxxxxxxxxxxxxxxxxx>
- Re: [PATCH 2/3] usb: phy-ulpi: Add EXTVBUSIND,CHRGVBUS flag support
- From: Sergei Shtylyov <sergei.shtylyov@xxxxxxxxxxxxxxxxxx>
- Re: 3.12.1 Virt dev invalid for slot_id 0x1 from drivers/usb/host/xhci.c
- From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
- [PATCH v4 12/16] usb/gadget: FunctionFS: add devices management code
- From: Andrzej Pietrasiewicz <andrzej.p@xxxxxxxxxxx>
- [PATCH v4 14/16] usb/gadget: g_ffs: convert to new interface of f_fs
- From: Andrzej Pietrasiewicz <andrzej.p@xxxxxxxxxxx>
- [PATCH v4 13/16] usb/gadget: FunctionFS: convert to new function interface with backward compatibility
- From: Andrzej Pietrasiewicz <andrzej.p@xxxxxxxxxxx>
- [PATCH v4 15/16] usb/gadget: FunctionFS: Remove compatibility layer
- From: Andrzej Pietrasiewicz <andrzej.p@xxxxxxxxxxx>
- [PATCH v4 16/16] usb/gadget: FunctionFS: add configfs support
- From: Andrzej Pietrasiewicz <andrzej.p@xxxxxxxxxxx>
- [PATCH v4 11/16] usb/gadget: FunctionFS: create utility file
- From: Andrzej Pietrasiewicz <andrzej.p@xxxxxxxxxxx>
- [PATCH v4 09/16] usb/gadget: rndis: merge u_rndis.ko with usb_f_rndis.ko
- From: Andrzej Pietrasiewicz <andrzej.p@xxxxxxxxxxx>
- [PATCH v4 10/16] usb/gadget: FunctionFS: Remove VLAIS usage from gadget code
- From: Andrzej Pietrasiewicz <andrzej.p@xxxxxxxxxxx>
- [PATCH v4 08/16] usb/gadget: f_rndis: remove compatibility layer
- From: Andrzej Pietrasiewicz <andrzej.p@xxxxxxxxxxx>
- [PATCH v4 02/16] usb/gadget: g_ffs: remove a reduntant gfs_ether_setup variable
- From: Andrzej Pietrasiewicz <andrzej.p@xxxxxxxxxxx>
- [PATCH v4 05/16] usb/gadget: g_ffs: convert to new interface of f_subset
- From: Andrzej Pietrasiewicz <andrzej.p@xxxxxxxxxxx>
- [PATCH v4 07/16] usb/gadget: g_ffs: convert to new interface of f_rndis
- From: Andrzej Pietrasiewicz <andrzej.p@xxxxxxxxxxx>
- [PATCH v4 03/16] usb/gadget: g_ffs: convert to new interface of f_ecm
- From: Andrzej Pietrasiewicz <andrzej.p@xxxxxxxxxxx>
- [PATCH v4 04/16] usb/gadget: f_ecm: remove compatibility layer
- From: Andrzej Pietrasiewicz <andrzej.p@xxxxxxxxxxx>
- [PATCH v4 06/16] usb/gadget: f_subset: remove compatibility layer
- From: Andrzej Pietrasiewicz <andrzej.p@xxxxxxxxxxx>
- [PATCH v4 01/16] usb/gadget: configfs: allow setting function instance's name
- From: Andrzej Pietrasiewicz <andrzej.p@xxxxxxxxxxx>
- [PATCH v4 00/16] Equivalent of g_ffs with configfs
- From: Andrzej Pietrasiewicz <andrzej.p@xxxxxxxxxxx>
- RE: [PATCH 1/1] mfd: omap-usb-host: Fix USB device detection problems on OMAP4 Panda
- From: "David Laight" <David.Laight@xxxxxxxxxx>
- Re: "Buggy kernel device driver?" for Super Top M6116 SATA Bridge (14cd:6116)
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: [RFC PATH 0/3] USB PHYs and PCI
- From: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
- Re: [PATCH 1/1] mfd: omap-usb-host: Fix USB device detection problems on OMAP4 Panda
- From: Roger Quadros <rogerq@xxxxxx>
- Re: net/usb/ax88179_178a driver broken in linux-3.12
- From: Mark Lord <mlord@xxxxxxxxx>
- Re: [PATCH 1/1] mfd: omap-usb-host: Fix USB device detection problems on OMAP4 Panda
- From: Paul Walmsley <paul@xxxxxxxxx>
- Re: [PATCH v6 00/16] ARM: at91: move to common clk framework
- From: boris brezillon <b.brezillon@xxxxxxxxxxx>
- "Buggy kernel device driver?" for Super Top M6116 SATA Bridge (14cd:6116)
- From: Jaime T <enopatch@xxxxxxxxx>
- Re: [PATCH 1/3] HID: usbhid: merge the sis quirk
- From: Jiri Kosina <jkosina@xxxxxxx>
- Re: [PATCH 1/1] mfd: omap-usb-host: Fix USB device detection problems on OMAP4 Panda
- From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
- Re: [PATCH 1/1] mfd: omap-usb-host: Fix USB device detection problems on OMAP4 Panda
- From: Roger Quadros <rogerq@xxxxxx>
- Re: [RFC PATH 2/3] usb: dwc3: add ULPI interface support
- From: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
- Re: [PATCH 1/1] mfd: omap-usb-host: Fix USB device detection problems on OMAP4 Panda
- From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
- Re: [PATCH 1/1] mfd: omap-usb-host: Fix USB device detection problems on OMAP4 Panda
- From: Roger Quadros <rogerq@xxxxxx>
- Re: [RFC PATH 1/3] phy: add USB ULPI abstraction layer
- From: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
- [PATCH] Staging: usbip: vhci_hcd.c: removed a space
- From: Aldo Iljazi <mail@xxxxxxx>
- Re: [PATCH v3 13/16] usb/gadget: FunctionFS: convert to new function interface with backward compatibility
- From: Michal Nazarewicz <mina86@xxxxxxxxxx>
- Re: [PATCH v6 00/16] ARM: at91: move to common clk framework
- From: Nicolas Ferre <nicolas.ferre@xxxxxxxxx>
- Re: [PATCH 1/1] mfd: omap-usb-host: Fix USB device detection problems on OMAP4 Panda
- From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
- [PATCH 1/2] Added support for the Lenovo RD02-D400 USB Modem
- From: David Cluytens <david.cluytens@xxxxxxxxx>
- [PATCH 2/2] Indent with tab instead of spaces.
- From: David Cluytens <david.cluytens@xxxxxxxxx>
- Re: [PATCH 1/1] mfd: omap-usb-host: Fix USB device detection problems on OMAP4 Panda
- From: Roger Quadros <rogerq@xxxxxx>
- Re: [PATCH 1/1] mfd: omap-usb-host: Fix USB device detection problems on OMAP4 Panda
- From: Roger Quadros <rogerq@xxxxxx>
- Re: [PATCH 1/1] mfd: omap-usb-host: Fix USB device detection problems on OMAP4 Panda
- From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
- Re: [PATCH v6 00/16] ARM: at91: move to common clk framework
- From: boris brezillon <b.brezillon@xxxxxxxxxxx>
- Re: [PATCH 2/2] ARM: dts: imx6q-udoo: Add USB host support
- From: Mark Rutland <mark.rutland@xxxxxxx>
- Re: [PATCH 1/2] chipidea: ci_hdrc_imx: Allow handling the clock for an USB phy/hub
- From: Mark Rutland <mark.rutland@xxxxxxx>
- Re: [RFC PATH 0/3] USB PHYs and PCI
- From: Kishon Vijay Abraham I <kishon@xxxxxx>
- Re: [RFC PATH 2/3] usb: dwc3: add ULPI interface support
- From: Kishon Vijay Abraham I <kishon@xxxxxx>
- Re: [RFC PATH 1/3] phy: add USB ULPI abstraction layer
- From: Kishon Vijay Abraham I <kishon@xxxxxx>
- Re: [PATCH] usb: cdc-wdm: manage_power should always set needs_remote_wakeup
- From: Oliver Neukum <oneukum@xxxxxxx>
- Re: [PATCH 1/1] mfd: omap-usb-host: Fix USB device detection problems on OMAP4 Panda
- From: Michael Trimarchi <michael@xxxxxxxxxxxxxxxxxxxx>
- Re: [PATCH 1/1] mfd: omap-usb-host: Fix USB device detection problems on OMAP4 Panda
- From: Roger Quadros <rogerq@xxxxxx>
- Re: [PATCH 1/1] mfd: omap-usb-host: Fix USB device detection problems on OMAP4 Panda
- From: Roger Quadros <rogerq@xxxxxx>
- RE: net/usb/ax88179_178a driver broken in linux-3.12
- From: "David Laight" <David.Laight@xxxxxxxxxx>
- [PATCH 1/1] support new huawei devices in option.c
- From: "Fangxiaozhi (Franko)" <fangxiaozhi@xxxxxxxxxx>
- Re: [PATCH 1/1] mfd: omap-usb-host: Fix USB device detection problems on OMAP4 Panda
- From: Roger Quadros <rogerq@xxxxxx>
- [PATCH 1/3] usb: phy-generic: Add GPIO based ChipSelect
- From: Chris Ruehl <chris.ruehl@xxxxxxxxxxxx>
- [PATCH 3/3] usb: phy-generic: Add ULPI VBUS support
- From: Chris Ruehl <chris.ruehl@xxxxxxxxxxxx>
- [PATCH] usb: phy-generic, phy-ulpi patch set
- From: Chris Ruehl <chris.ruehl@xxxxxxxxxxxx>
- [PATCH 2/3] usb: phy-ulpi: Add EXTVBUSIND,CHRGVBUS flag support
- From: Chris Ruehl <chris.ruehl@xxxxxxxxxxxx>
- Re: [PATCH 2/3 v3] usb: chipidea: Fix Internal error: : 808 [#1] ARM related to STS flag
- From: Chris Ruehl <chris.ruehl@xxxxxxxxxxxx>
- RE: [PATCH] usb: phy: phy-mxs-usb: Check the return value from clk_prepare_enable()
- From: Peter Chen <Peter.Chen@xxxxxxxxxxxxx>
- RE: [PATCH 2/3 v3] usb: chipidea: Fix Internal error: : 808 [#1] ARM related to STS flag
- From: Peter Chen <Peter.Chen@xxxxxxxxxxxxx>
- [PATCH] usb: phy: phy-mxs-usb: Check the return value from clk_prepare_enable()
- From: Fabio Estevam <festevam@xxxxxxxxx>
- Re: [PATCH v1 1/2] lib/scatterlist: export sg_miter_skip()
- From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH v1 1/2] lib/scatterlist: export sg_miter_skip()
- From: Ming Lei <ming.lei@xxxxxxxxxxxxx>
- Re: [PATCH 2/3 v3] usb: chipidea: Fix Internal error: : 808 [#1] ARM related to STS flag
- From: Chris Ruehl <chris.ruehl@xxxxxxxxxxxx>
- xhci regression: usb 3.0 hdd disconnects immediately
- From: Lado Kumsiashvili <herrlado@xxxxxxxxx>
- Re: some question about EXDEV status in period schedule
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: some question about period scheduleing
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: USB instabilities with Atheros AR9344
- From: Kristian Evensen <kristian.evensen@xxxxxxxxx>
- Re: some question about period scheduleing
- From: vichy <vichy.kuo@xxxxxxxxx>
- Re: [PATCH 1/1] mfd: omap-usb-host: Fix USB device detection problems on OMAP4 Panda
- From: Michael Trimarchi <michael@xxxxxxxxxxxxxxxxxxxx>
- Re: [PATCH v6 00/16] ARM: at91: move to common clk framework
- From: Mike Turquette <mturquette@xxxxxxxxxx>
- Re: [PATCH v5 00/17] ARM: at91: move to common clk framework
- From: Mike Turquette <mturquette@xxxxxxxxxx>
- [PATCH v6 11/17] USB: fsl-mph-dr-of: adjust for OF based clock lookup
- From: Gerhard Sittig <gsi@xxxxxxx>
- [PATCH v6 00/17] add COMMON_CLK support for PowerPC MPC512x
- From: Gerhard Sittig <gsi@xxxxxxx>
- Re: [PATCH] usb: phy: am335x: Prevent GPIO reset line request
- From: Ezequiel Garcia <ezequiel.garcia@xxxxxxxxxxxxxxxxxx>
- [PATCH] Staging: dwc2: hcd.c: Fixed a coding style issue
- From: Aldo Iljazi <mail@xxxxxxx>
- Re: [PATCH 2/3 v3] usb: chipidea: Fix Internal error: : 808 [#1] ARM related to STS flag
- From: Sergei Shtylyov <sergei.shtylyov@xxxxxxxxxxxxxxxxxx>
- Re: some question about period scheduleing
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH] add new pid for alcatel re-shape some alcatel pid list
- From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
- Re: USB instabilities with Atheros AR9344
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH 1/1] usb: chipidea: fix nobody cared IRQ when booting with host role
- From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
- Re: [PATCH v6 0/3] usb: ehci+chipidea: fix imx28 "ENGR119653 USB: ARM to USB register error issue"
- From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
- RE: [PATCH 2/3 v3] usb: chipidea: Fix Internal error: : 808 [#1] ARM related to STS flag
- From: Peter Chen <Peter.Chen@xxxxxxxxxxxxx>
- RE: [PATCH 2/3 v2] usb: chipidea: Fix Internal error: : 808 [#1] ARM related to STS flag
- From: Peter Chen <Peter.Chen@xxxxxxxxxxxxx>
- Re: [PATCH v2 1/2] usb: chipidea: usbmisc: Add support for i.MX27/i.MX31 CPUs
- From: Chris Ruehl <chris.ruehl@xxxxxxxxxxxx>
- Re: [PATCH 1/1] mfd: omap-usb-host: Fix USB device detection problems on OMAP4 Panda
- From: Michael Trimarchi <michael@xxxxxxxxxxxxxxxxxxxx>
- Re: [PATCH 1/1] mfd: omap-usb-host: Fix USB device detection problems on OMAP4 Panda
- From: Michael Trimarchi <michael@xxxxxxxxxxxxxxxxxxxx>
- [PATCH 1/3 v3] usb: chipidea: Reallocate regmap only if lpm is detected
- From: Chris Ruehl <chris.ruehl@xxxxxxxxxxxx>
- [PATCH 2/3 v3] usb: chipidea: Fix Internal error: : 808 [#1] ARM related to STS flag
- From: Chris Ruehl <chris.ruehl@xxxxxxxxxxxx>
- [PATCH 3/3 v3] usb: chipidea: hw_phymode_configure moved before ci_usb_phy_init
- From: Chris Ruehl <chris.ruehl@xxxxxxxxxxxx>
- Re: net/usb/ax88179_178a driver broken in linux-3.12
- From: Mark Lord <mlord@xxxxxxxxx>
- Re: [PATCH 2/3 v2] usb: chipidea: Fix Internal error: : 808 [#1] ARM related to STS flag
- From: Chris Ruehl <chris.ruehl@xxxxxxxxxxxx>
- Re: [PATCH 2/3 v2] usb: chipidea: Fix Internal error: : 808 [#1] ARM related to STS flag
- From: Chris Ruehl <chris.ruehl@xxxxxxxxxxxx>
- Re: [PATCH 2/3 v2] usb: chipidea: Fix Internal error: : 808 [#1] ARM related to STS flag
- From: Chris Ruehl <chris.ruehl@xxxxxxxxxxxx>
- Re: [PATCH v1 1/2] lib/scatterlist: export sg_miter_skip()
- From: Tejun Heo <tj@xxxxxxxxxx>
- Re: [PATCH] Added support for the Lenovo RD02-D400 USB Modem
- From: Sergei Shtylyov <sergei.shtylyov@xxxxxxxxxxxxxxxxxx>
- [PATCH] usb: cdc-wdm: manage_power should always set needs_remote_wakeup
- From: Bjørn Mork <bjorn@xxxxxxx>
- Re: [PATCH 2/3 v2] usb: chipidea: Fix Internal error: : 808 [#1] ARM related to STS flag
- From: Michael Grzeschik <mgr@xxxxxxxxxxxxxx>
- Re: [PATCH v3 12/16] usb/gadget: FunctionFS: add devices management code
- From: Michal Nazarewicz <mina86@xxxxxxxxxx>
- some question about period scheduleing
- From: vichy <vichy.kuo@xxxxxxxxx>
- [PATCH] Added support for the Lenovo RD02-D400 USB Modem
- From: david.cluytens@xxxxxxxxx
- Re: [PATCH 1/1] mfd: omap-usb-host: Fix USB device detection problems on OMAP4 Panda
- From: Michael Trimarchi <michael@xxxxxxxxxxxxxxxxxxxx>
- Re: USB instabilities with Atheros AR9344
- From: Kristian Evensen <kristian.evensen@xxxxxxxxx>
- Re: USB instabilities with Atheros AR9344
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH 27/31] USB: EHCI: tegra: use reset framework
- From: Thierry Reding <thierry.reding@xxxxxxxxx>
- RE: [PATCH 1/1] mfd: omap-usb-host: Fix USB device detection problems on OMAP4 Panda
- From: "David Laight" <David.Laight@xxxxxxxxxx>
- USB instabilities with Atheros AR9344
- From: Kristian Evensen <kristian.evensen@xxxxxxxxx>
- [PATCH 0/1] mfd: omap-usb-host: Bug fix for 3.13 rc
- From: Roger Quadros <rogerq@xxxxxx>
- [PATCH 1/1] mfd: omap-usb-host: Fix USB device detection problems on OMAP4 Panda
- From: Roger Quadros <rogerq@xxxxxx>
- Re: [PATCH 1/3] ACPI / bind: Rework struct acpi_bus_type
- From: "Rafael J. Wysocki" <rjw@xxxxxxxxxxxxx>
- Re: [PATCH 2/3] usb: chipidea: Fix Internal error: : 808 [#1] ARM related to STS flag
- From: Michael Grzeschik <mgr@xxxxxxxxxxxxxx>
- RE: [PATCH v2 2/2] usb: chipidea: usbmisc: Add support for i.MX51 CPU
- From: Peter Chen <Peter.Chen@xxxxxxxxxxxxx>
- RE: [PATCH v2 1/2] usb: chipidea: usbmisc: Add support for i.MX27/i.MX31 CPUs
- From: Peter Chen <Peter.Chen@xxxxxxxxxxxxx>
- RE: [PATCH 2/3 v2] usb: chipidea: Fix Internal error: : 808 [#1] ARM related to STS flag
- From: Peter Chen <Peter.Chen@xxxxxxxxxxxxx>
- RE: [PATCH 1/3 v2] usb: chipidea: Reallocate regmap only if lpm is detected
- From: Peter Chen <Peter.Chen@xxxxxxxxxxxxx>
- Re: [PATCH 1/8] usb/gadget: uvc: move descriptors to their only user
- From: Andrzej Pietrasiewicz <andrzej.p@xxxxxxxxxxx>
- [PATCH 3/3 v2] usb: chipidea: hw_phymode_configure moved before ci_usb_phy_init
- From: Chris Ruehl <chris.ruehl@xxxxxxxxxxxx>
- [PATCH 2/3 v2] usb: chipidea: Fix Internal error: : 808 [#1] ARM related to STS flag
- From: Chris Ruehl <chris.ruehl@xxxxxxxxxxxx>
- [PATCH 1/3 v2] usb: chipidea: Reallocate regmap only if lpm is detected
- From: Chris Ruehl <chris.ruehl@xxxxxxxxxxxx>
- RE: [PATCH 2/3] usb: chipidea: Fix Internal error: : 808 [#1] ARM related to STS flag
- From: Peter Chen <Peter.Chen@xxxxxxxxxxxxx>
- Re: [PATCH 2/3] usb: chipidea: Fix Internal error: : 808 [#1] ARM related to STS flag
- From: Chris Ruehl <chris.ruehl@xxxxxxxxxxxx>
- RE: [PATCH 3/3] usb: chipidea: hw_phymode_configure moved before ci_usb_phy_init
- From: Peter Chen <Peter.Chen@xxxxxxxxxxxxx>
- RE: [PATCH 2/3] usb: chipidea: Fix Internal error: : 808 [#1] ARM related to STS flag
- From: Peter Chen <Peter.Chen@xxxxxxxxxxxxx>
- RE: [PATCH 1/3] usb: chipidea: Reallocate regmap only if lpm is detected
- From: Peter Chen <Peter.Chen@xxxxxxxxxxxxx>
- Re: [PATCH 3/3] usb: chipidea: hw_phymode_configure moved before ci_usb_phy_init
- From: Fabio Estevam <festevam@xxxxxxxxx>
- Re: [PATCH 3/3] usb: chipidea: hw_phymode_configure moved before ci_usb_phy_init
- From: Chris Ruehl <chris.ruehl@xxxxxxxxxxxx>
- Re: [PATCH 0/3] ACPI / bind: Use struct acpi_device pointers instead of ACPI handles
- From: Lan Tianyu <tianyu.lan@xxxxxxxxx>
- Re: [PATCH 3/3] usb: chipidea: hw_phymode_configure moved before ci_usb_phy_init
- From: Fabio Estevam <festevam@xxxxxxxxx>
- [PATCH 3/3] usb: chipidea: hw_phymode_configure moved before ci_usb_phy_init
- From: Chris Ruehl <chris.ruehl@xxxxxxxxxxxx>
- [PATCH 2/3] usb: chipidea: Fix Internal error: : 808 [#1] ARM related to STS flag
- From: Chris Ruehl <chris.ruehl@xxxxxxxxxxxx>
- [PATCH 1/3] usb: chipidea: Reallocate regmap only if lpm is detected
- From: Chris Ruehl <chris.ruehl@xxxxxxxxxxxx>
- Re: [PATCH 1/3] ACPI / bind: Rework struct acpi_bus_type
- From: Lan Tianyu <tianyu.lan@xxxxxxxxx>
- [PATCH 0/3] ACPI / bind: Use struct acpi_device pointers instead of ACPI handles
- From: "Rafael J. Wysocki" <rjw@xxxxxxxxxxxxx>
- [PATCH 1/3] ACPI / bind: Rework struct acpi_bus_type
- From: "Rafael J. Wysocki" <rjw@xxxxxxxxxxxxx>
- [PATCH 3/3] ACPI / bind: Move acpi_get_child() to drivers/ide/ide-acpi.c
- From: "Rafael J. Wysocki" <rjw@xxxxxxxxxxxxx>
- [PATCH 2/3] ACPI / bind: Pass struct acpi_device pointer to acpi_bind_one()
- From: "Rafael J. Wysocki" <rjw@xxxxxxxxxxxxx>
- Re: [PATCH V2] usb: musb: Fix unstable init of OTG_INTERFSEL.
- From: Grazvydas Ignotas <notasas@xxxxxxxxx>
- Re: [PATCH 1/8] usb/gadget: uvc: move descriptors to their only user
- From: Michael Grzeschik <mgr@xxxxxxxxxxxxxx>
- Re: [PATCH 1/8] usb/gadget: uvc: move descriptors to their only user
- From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
- RE: [PATCH v3 5/9] usb: gadget: s3c-hsotg: use generic phy_init()/phy_exit() support
- From: Kamil Debski <k.debski@xxxxxxxxxxx>
- Re: Need help to support USB3.0 HID Keyboard device
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH v3 5/9] usb: gadget: s3c-hsotg: use generic phy_init()/phy_exit() support
- From: Matt Porter <matt.porter@xxxxxxxxxx>
- [RFC PATH 3/3] phy: ulpi: add support for NXP ISP170X USB PHY
- From: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
- [RFC PATH 2/3] usb: dwc3: add ULPI interface support
- From: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
- [RFC PATH 1/3] phy: add USB ULPI abstraction layer
- From: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
- [RFC PATH 0/3] USB PHYs and PCI
- From: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
- [PATCH v6 04/16] clk: at91: add PMC macro file for dt definitions
- From: Boris BREZILLON <b.brezillon@xxxxxxxxxxx>
- [PATCH v6 13/16] clk: at91: add PMC smd clock
- From: Boris BREZILLON <b.brezillon@xxxxxxxxxxx>
- [PATCH v6 14/16] dt: binding: add at91 clks dt bindings documentation
- From: Boris BREZILLON <b.brezillon@xxxxxxxxxxx>
- [PATCH v6 16/16] ARM: at91: add new compatible strings for pmc driver
- From: Boris BREZILLON <b.brezillon@xxxxxxxxxxx>
- [PATCH v6 15/16] ARM: at91: move pit timer to common clk framework
- From: Boris BREZILLON <b.brezillon@xxxxxxxxxxx>
- [PATCH v6 12/16] clk: at91: add PMC usb clock
- From: Boris BREZILLON <b.brezillon@xxxxxxxxxxx>
- [PATCH v6 10/16] clk: at91: add PMC programmable clocks
- From: Boris BREZILLON <b.brezillon@xxxxxxxxxxx>
- [PATCH v6 11/16] clk: at91: add PMC utmi clock
- From: Boris BREZILLON <b.brezillon@xxxxxxxxxxx>
- [PATCH v6 09/16] clk: at91: add PMC peripheral clocks
- From: Boris BREZILLON <b.brezillon@xxxxxxxxxxx>
- [PATCH v6 02/16] ARM: at91: add Kconfig options for common clk support
- From: Boris BREZILLON <b.brezillon@xxxxxxxxxxx>
- [PATCH v6 01/16] ARM: at91: move at91_pmc.h to include/linux/clk/at91_pmc.h
- From: Boris BREZILLON <b.brezillon@xxxxxxxxxxx>
- [PATCH v6 08/16] clk: at91: add PMC system clocks
- From: Boris BREZILLON <b.brezillon@xxxxxxxxxxx>
- [PATCH v6 03/16] clk: at91: add PMC base support
- From: Boris BREZILLON <b.brezillon@xxxxxxxxxxx>
- [PATCH v6 06/16] clk: at91: add PMC pll clocks
- From: Boris BREZILLON <b.brezillon@xxxxxxxxxxx>
- [PATCH v6 05/16] clk: at91: add PMC main clock
- From: Boris BREZILLON <b.brezillon@xxxxxxxxxxx>
- [PATCH v6 00/16] ARM: at91: move to common clk framework
- From: Boris BREZILLON <b.brezillon@xxxxxxxxxxx>
- [PATCH v6 07/16] clk: at91: add PMC master clock
- From: Boris BREZILLON <b.brezillon@xxxxxxxxxxx>
- Re: [PATCH] usb: s3c-hsotg: change dependency to PLAT_SAMSUNG
- From: Marek Szyprowski <m.szyprowski@xxxxxxxxxxx>
- Re: zte_ev not properly handling ZTE AC2726 CDMA modems
- From: Johan Hovold <jhovold@xxxxxxxxx>
- Re: Check device use before detaching?
- From: Michael Grzeschik <mgr@xxxxxxxxxxxxxx>
- Re: [PATCH v5 06/17] clk: at91: add PMC pll clocks
- From: boris brezillon <b.brezillon@xxxxxxxxxxx>
- Re: [PATCH 10/12] usb: r8a66597-hcd: Convert to clk_prepare/unprepare
- From: Simon Horman <horms@xxxxxxxxxxxx>
- [PATCH V2] usb: musb: Fix unstable init of OTG_INTERFSEL.
- From: anaumann@xxxxxxxxxxxxxx
- [PATCH 3/8] usb/gadget: uvc: separately compile some components of f_uvc
- From: Andrzej Pietrasiewicz <andrzej.p@xxxxxxxxxxx>
- [PATCH 6/8] usb/gadget: f_uvc: remove compatibility layer
- From: Andrzej Pietrasiewicz <andrzej.p@xxxxxxxxxxx>
- [PATCH 8/8] usb/gadget: f_uvc: add configfs support
- From: Andrzej Pietrasiewicz <andrzej.p@xxxxxxxxxxx>
- [PATCH 4/8] usb/gadget: f_uvc: convert f_uvc to new function interface
- From: Andrzej Pietrasiewicz <andrzej.p@xxxxxxxxxxx>
- [PATCH 7/8] usb/gadget: f_uvc: use usb_gstrings_attach
- From: Andrzej Pietrasiewicz <andrzej.p@xxxxxxxxxxx>
- [PATCH 5/8] usb/gadget: webcam: convert webcam to new interface of f_uvc
- From: Andrzej Pietrasiewicz <andrzej.p@xxxxxxxxxxx>
- [PATCH 0/8] Equivalent of g_webcam with configfs
- From: Andrzej Pietrasiewicz <andrzej.p@xxxxxxxxxxx>
- [PATCH 2/8] usb/gadget: uvc: move module parameters from f_uvc
- From: Andrzej Pietrasiewicz <andrzej.p@xxxxxxxxxxx>
- [PATCH 1/8] usb/gadget: uvc: move descriptors to their only user
- From: Andrzej Pietrasiewicz <andrzej.p@xxxxxxxxxxx>
- Re: [PATCH v2 2/2] usb: chipidea: usbmisc: Add support for i.MX51 CPU
- From: Alexander Shiyan <shc_work@xxxxxxx>
- Re: VIA chipset not supported by xhci drivers?
- From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH v3 5/9] usb: gadget: s3c-hsotg: use generic phy_init()/phy_exit() support
- From: Kishon Vijay Abraham I <kishon@xxxxxx>
- Re: Need help to support USB3.0 HID Keyboard device
- From: Bhavik Kothari <bhavik.kothari@xxxxxxxxxxxxxxxx>
- [PATCH 5/5] usb: gadget: amd5536udc: remove DEFINE_PCI_DEVICE_TABLE macro
- From: Jingoo Han <jg1.han@xxxxxxxxxxx>
- [PATCH 4/5] usb: gadget: pch_udc: remove DEFINE_PCI_DEVICE_TABLE macro
- From: Jingoo Han <jg1.han@xxxxxxxxxxx>
- [PATCH 3/5] usb: dwc3: pci: remove DEFINE_PCI_DEVICE_TABLE macro
- From: Jingoo Han <jg1.han@xxxxxxxxxxx>
- [PATCH 2/5] usb: chipidea: remove DEFINE_PCI_DEVICE_TABLE macro
- From: Jingoo Han <jg1.han@xxxxxxxxxxx>
- [PATCH 1/5] USB: UHCI: remove DEFINE_PCI_DEVICE_TABLE macro
- From: Jingoo Han <jg1.han@xxxxxxxxxxx>
- Re: [PATCH 1/3] usb: gadget: goku_udc: use DEFINE_PCI_DEVICE_TABLE macro
- From: Jingoo Han <jg1.han@xxxxxxxxxxx>
- Re: musb: bluk_split only worked for the first segment(PIO only)
- From: Yingchun Li <sword.l.dragon@xxxxxxxxx>
- Re: 答复: Re: 【PATCH】USB:add new zte 3g-modem's pid to option.c
- From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH 1/3] usb: gadget: goku_udc: use DEFINE_PCI_DEVICE_TABLE macro
- From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
- [PATCH -next] staging: dwc2: fix sparse non static symbol warning
- From: Wei Yongjun <weiyj.lk@xxxxxxxxx>
- Re: [PATCH v2 2/2] usb: chipidea: usbmisc: Add support for i.MX51 CPU
- From: Shawn Guo <shawn.guo@xxxxxxxxxx>
- [PATCH 5/5] USB: isp1760: use DEFINE_PCI_DEVICE_TABLE macro
- From: Jingoo Han <jg1.han@xxxxxxxxxxx>
- [PATCH 4/5] USB: whci-hcd: use DEFINE_PCI_DEVICE_TABLE macro
- From: Jingoo Han <jg1.han@xxxxxxxxxxx>
- [PATCH 3/5] USB: xHCI: use DEFINE_PCI_DEVICE_TABLE macro
- From: Jingoo Han <jg1.han@xxxxxxxxxxx>
- [PATCH 2/5] USB: OHCI: use DEFINE_PCI_DEVICE_TABLE macro
- From: Jingoo Han <jg1.han@xxxxxxxxxxx>
- [PATCH 1/5] USB: EHCI: use DEFINE_PCI_DEVICE_TABLE macro
- From: Jingoo Han <jg1.han@xxxxxxxxxxx>
- [PATCH 3/3] usb: gadget: net2280: use DEFINE_PCI_DEVICE_TABLE macro
- From: Jingoo Han <jg1.han@xxxxxxxxxxx>
- [PATCH 2/3] usb: gadget: net2272: use DEFINE_PCI_DEVICE_TABLE macro
- From: Jingoo Han <jg1.han@xxxxxxxxxxx>
- [PATCH 1/3] usb: gadget: goku_udc: use DEFINE_PCI_DEVICE_TABLE macro
- From: Jingoo Han <jg1.han@xxxxxxxxxxx>
- RE: [REWORKED PATCH 1/5] usb: phy: fsm: don't depend on indirect includes
- From: Anton Tikhomirov <av.tikhomirov@xxxxxxxxxxx>
- Re: 3.12.1 Virt dev invalid for slot_id 0x1 from drivers/usb/host/xhci.c
- From: Shuah Khan <shuah.kh@xxxxxxxxxxx>
- Re: [GIT PULL] xhci: Big-endian sparse fixes.
- From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
- Re: [GIT PULL] xhci: Big-endian sparse fixes.
- From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
- Re: [GIT PULL] xhci: Big-endian sparse fixes.
- From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
- [PATCH 06/10] xhci: remove conversion from generic to pci device in xhci_mem.c
- From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
- [PATCH 07/10] xhci: replace xhci_readl() with readl()
- From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
- [PATCH 08/10] xhci: replace xhci_writel() with writel()
- From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
- [PATCH 03/10] xhci: remove unnecessary check in xhci_free_stream_info()
- From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
- [PATCH 09/10] xhci: replace xhci_read_64() with readq()
- From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
- [PATCH 10/10] xhci: replace xhci_write_64() with writeq()
- From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
- [PATCH 05/10] xhci: fix incorrect type in assignment in xhci_count_num_dropped_endpoints()
- From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
- [PATCH 02/10] xhci: fix SCT_FOR_CTX(p) macro
- From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
- [PATCH 04/10] xhci: fix incorrect type in assignment in xhci_count_num_new_endpoints()
- From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
- [PATCH 01/10] xhci: replace USB_MAXINTERFACES with config->desc.bNumInterface
- From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
- [GIT PULL] xhci: Sparse fixes, replace xhci_read/write, misc
- From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
- [PATCH 3/5] xhci: fix derivation of TRB's DMA address in xhci_log_event Trace Event Class
- From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
- [PATCH 4/5] xhci: fix sparse warning in xhci-trace.h
- From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
- [PATCH 5/5] xhci: fix incorrect type in assignment in xhci_address_device()
- From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
- [PATCH 1/5] xhci: convert TRB_CYCLE to le32 before using it to set Link TRB's cycle bit
- From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
- [PATCH 2/5] xhci: fix incorrect type in assignment in handle_device_notification()
- From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
- [GIT PULL] xhci: Big-endian sparse fixes.
- From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
- Re: [PATCH v3 5/9] usb: gadget: s3c-hsotg: use generic phy_init()/phy_exit() support
- From: Matt Porter <matt.porter@xxxxxxxxxx>
- Re: [PATCH v5 08/17] clk: at91: add PMC system clocks
- From: Mike Turquette <mturquette@xxxxxxxxxx>
- VIA chipset not supported by xhci drivers?
- From: Philip Prindeville <philipp_subx@xxxxxxxxxxxxxxxxxxxxx>
- Re: 3.12.1 Virt dev invalid for slot_id 0x1 from drivers/usb/host/xhci.c
- From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
- Re: Advice on usb-next pull
- From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
- Re: Advice on usb-next pull
- From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH v5 06/17] clk: at91: add PMC pll clocks
- From: Mike Turquette <mturquette@xxxxxxxxxx>
- Advice on usb-next pull
- From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
- Re: [PATCH 2/3] ARM: dts: keystone: Add usb devicetree bindings
- From: Santosh Shilimkar <santosh.shilimkar@xxxxxx>
- Re: huawei E5776 (hilink) 3.12-->3.13 not working anymore
- From: Thomas Schäfer <tschaefer@xxxxxxxxxxx>
- Re: [PATCH 1/3] usb: dwc3: Add Keystone specific glue layer
- From: Felipe Balbi <balbi@xxxxxx>
- Re: possible xhci regression: usb 3.0 hdd disconnects immediately
- From: b3nmore <b3nmore@xxxxxxxxxxxxxx>
- Re: [PATCH 1/3] usb: dwc3: Add Keystone specific glue layer
- From: Santosh Shilimkar <santosh.shilimkar@xxxxxx>
- Re: [RESEND GIT PULL v2] USB fixes for v3.13-rc2
- From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH v2 4/4] usb/gadget: f_sourcesink: add configfs support
- From: Felipe Balbi <balbi@xxxxxx>
- Re: [PATCH] usb: s3c-hsotg: change dependency to PLAT_SAMSUNG
- From: Felipe Balbi <balbi@xxxxxx>
- Re: [REWORKED PATCH 1/5] usb: phy: fsm: don't depend on indirect includes
- From: Felipe Balbi <balbi@xxxxxx>
- Re: [PATCH 1/3] usb: dwc3: Add Keystone specific glue layer
- From: Felipe Balbi <balbi@xxxxxx>
- Re: BUG: usb: obex in g_nokia.ko causing kernel panic
- From: Felipe Balbi <balbi@xxxxxx>
- Re: [PATCH v3 9/9] ARM: dts: add usb udc support to bcm281xx
- From: Matt Porter <matt.porter@xxxxxxxxxx>
- Re: [RFC PATCH] usb: gadget/uvc: add streaming and data event handling
- From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
- Re: [PATCH v3 8/9] phy: add Broadcom Kona USB2 PHY driver
- From: Matt Porter <matt.porter@xxxxxxxxxx>
- Re: [PATCH v3 7/9] phy: add Broadcom Kona USB2 PHY DT binding
- From: Matt Porter <matt.porter@xxxxxxxxxx>
- Re: [PATCH v3 6/9] usb: gadget: s3c-hsotg: get phy bus width from phy subsystem
- From: Matt Porter <matt.porter@xxxxxxxxxx>
- Re: [PATCH v3 5/9] usb: gadget: s3c-hsotg: use generic phy_init()/phy_exit() support
- From: Matt Porter <matt.porter@xxxxxxxxxx>
- Re: [PATCH v3 2/9] staging: dwc2: update DT binding to add generic clock/phy properties
- From: Matt Porter <matt.porter@xxxxxxxxxx>
- Re: [PATCH v3 1/9] phy: add phy_get_bus_width()/phy_set_bus_width() calls
- From: Matt Porter <matt.porter@xxxxxxxxxx>
- Re: zte_ev not properly handling ZTE AC2726 CDMA modems
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: BUG: usb: obex in g_nokia.ko causing kernel panic
- From: Pali Rohár <pali.rohar@xxxxxxxxx>
- Re: zte_ev not properly handling ZTE AC2726 CDMA modems
- From: Johan Hovold <jhovold@xxxxxxxxx>
- Re: huawei E5776 (hilink) 3.12-->3.13 not working anymore
- From: Lars Melin <larsm17@xxxxxxxxx>
- RE: Xhci Host not allowed to send get device desc at addr zero
- From: Aymen BOUATTAY <aymen.bouattay@xxxxxx>
- Re: [PATCH v2] PM / Sleep: Add pm_generic functions to re-use runtime PM callbacks
- From: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
- Re: [PATCH v2] PM / Sleep: Add pm_generic functions to re-use runtime PM callbacks
- From: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
- Re: 【PATCH】USB:add new zte 3g-modem's pid to option.c
- From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH] A patch fro support alcatel's new products
- From: "gregkh@xxxxxxxxxxxxxxxxxxx" <gregkh@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH v2] PM / Sleep: Add pm_generic functions to re-use runtime PM callbacks
- From: "Rafael J. Wysocki" <rjw@xxxxxxxxxxxxx>
- Re: huawei E5776 (hilink) 3.12-->3.13 not working anymore
- From: Bjørn Mork <bjorn@xxxxxxx>
- Re: huawei E5776 (hilink) 3.12-->3.13 not working anymore
- From: Thomas Schäfer <tschaefer@xxxxxxxxxxx>
- [PATCH] usb: s3c-hsotg: change dependency to PLAT_SAMSUNG
- From: Marek Szyprowski <m.szyprowski@xxxxxxxxxxx>
- Re: huawei E5776 (hilink) 3.12-->3.13 not working anymore
- From: Bjørn Mork <bjorn@xxxxxxx>
- Re: [PATCH v2] PM / Sleep: Add pm_generic functions to re-use runtime PM callbacks
- From: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
- Re: [PATCH 2/3] ARM: dts: keystone: Add usb devicetree bindings
- From: George Cherian <george.cherian@xxxxxx>
- Re: [PATCH 1/3] usb: dwc3: Add Keystone specific glue layer
- From: George Cherian <george.cherian@xxxxxx>
- Re: [PATCH v3 9/9] ARM: dts: add usb udc support to bcm281xx
- From: Kishon Vijay Abraham I <kishon@xxxxxx>
- Re: [PATCH v3 8/9] phy: add Broadcom Kona USB2 PHY driver
- From: Kishon Vijay Abraham I <kishon@xxxxxx>
- Re: [PATCH v2 4/4] usb/gadget: f_sourcesink: add configfs support
- From: Andrzej Pietrasiewicz <andrzej.p@xxxxxxxxxxx>
- Re: musb: bluk_split only worked for the first segment(PIO only)
- From: Yingchun Li <sword.l.dragon@xxxxxxxxx>
- RE: [REWORKED PATCH 1/5] usb: phy: fsm: don't depend on indirect includes
- From: Anton Tikhomirov <av.tikhomirov@xxxxxxxxxxx>
- [PATCH 3/3] HID: usbhid: quirk for Synaptics Quad HD touchscreen
- From: AceLan Kao <acelan.kao@xxxxxxxxxxxxx>
- [PATCH 2/3] HID: usbhid: quirk for Synaptics HD touchscreen
- From: AceLan Kao <acelan.kao@xxxxxxxxxxxxx>
- [PATCH 1/3] HID: usbhid: merge the sis quirk
- From: AceLan Kao <acelan.kao@xxxxxxxxxxxxx>
- Re: [PATCH v2] PM / Sleep: Add pm_generic functions to re-use runtime PM callbacks
- From: "Rafael J. Wysocki" <rjw@xxxxxxxxxxxxx>
- Re: [PATCH v2] PM / Sleep: Add pm_generic functions to re-use runtime PM callbacks
- From: "Rafael J. Wysocki" <rjw@xxxxxxxxxxxxx>
- [PATCH] PM / Runtime: Implement the pm_generic_runtime functions for CONFIG_PM
- From: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
- Re: [PATCH v2] PM / Sleep: Add pm_generic functions to re-use runtime PM callbacks
- From: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
- [PATCH 2/2] usb: hcd: Initialize USB phy if needed
- From: Valentine Barshak <valentine.barshak@xxxxxxxxxxxxxxxxxx>
- [PATCH 1/2] usb: hcd: Remove USB phy if needed
- From: Valentine Barshak <valentine.barshak@xxxxxxxxxxxxxxxxxx>
- [V2 PATCH 0/2] Defer HCD init until the external PHY, bound to the HCD is ready
- From: Valentine Barshak <valentine.barshak@xxxxxxxxxxxxxxxxxx>
- RE: zte_ev not properly handling ZTE AC2726 CDMA modems
- From: "Dmitry Kunilov" <dmitry.kunilov@xxxxxxxxx>
- Re: [3.8-rc3 -> 3.8-rc4 regression] Re: [PATCH] module, async: async_synchronize_full() on module init iff async is used
- From: Linus Torvalds <torvalds@xxxxxxxxxxxxxxxxxxxx>
- Re: [3.8-rc3 -> 3.8-rc4 regression] Re: [PATCH] module, async: async_synchronize_full() on module init iff async is used
- From: Tejun Heo <tj@xxxxxxxxxx>
- Re: [PATCH] ARM: dts: omap3-beagle: Fix USB host on beagle boards (for 3.13)
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH v3 09/10] ARM: dts: omap3-beagle-xm: Add USB Host support
- From: Nishanth Menon <nm@xxxxxx>
- Re: [3.8-rc3 -> 3.8-rc4 regression] Re: [PATCH] module, async: async_synchronize_full() on module init iff async is used
- From: Josh Hunt <joshhunt00@xxxxxxxxx>
- Re: [RFC V2 PATCH 0/2] Defer HCD init until the external PHY, bound to the HCD is ready
- From: Valentine <valentine.barshak@xxxxxxxxxxxxxxxxxx>
- Re: [3.8-rc3 -> 3.8-rc4 regression] Re: [PATCH] module, async: async_synchronize_full() on module init iff async is used
- From: Linus Torvalds <torvalds@xxxxxxxxxxxxxxxxxxxx>
- Re: [RFC V2 PATCH 0/2] Defer HCD init until the external PHY, bound to the HCD is ready
- From: Greg KH <greg@xxxxxxxxx>
- Re: [PATCH 09/12] usb: gadget: r8a66597-udc: Convert to clk_prepare/unprepare
- From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
- Re: [RFC V2 PATCH 0/2] Defer HCD init until the external PHY, bound to the HCD is ready
- From: Valentine <valentine.barshak@xxxxxxxxxxxxxxxxxx>
- Re: [3.8-rc3 -> 3.8-rc4 regression] Re: [PATCH] module, async: async_synchronize_full() on module init iff async is used
- From: Josh Hunt <joshhunt00@xxxxxxxxx>
- huawei E5776 (hilink) 3.12-->3.13 not working anymore
- From: Thomas Schäfer <tschaefer@xxxxxxxxxxx>
- Re: [PATCH v2] PM / Sleep: Add pm_generic functions to re-use runtime PM callbacks
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH v3 09/10] ARM: dts: omap3-beagle-xm: Add USB Host support
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: zte_ev not properly handling ZTE AC2726 CDMA modems
- From: Johan Hovold <jhovold@xxxxxxxxx>
- RE: zte_ev not properly handling ZTE AC2726 CDMA modems
- From: "Dmitry Kunilov" <dmitry.kunilov@xxxxxxxxx>
- Re: [PATCH v2] PM / Sleep: Add pm_generic functions to re-use runtime PM callbacks
- From: "Rafael J. Wysocki" <rjw@xxxxxxxxxxxxx>
[Index of Archives]
[Linux USB Devel (old)]
[Linux Input]
[Linux SCSI]
[Samba]
[Yosemite News]