RE: [PATCH 3/3 v4] usb: chipidea: hw_phymode_configure moved before ci_usb_phy_init

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



 
> 
> usb: chipidea: hw_phymode_configure moved before ci_usb_phy_init

usb: chipidea: put hw_phymode_configure before ci_usb_phy_init
Besides, a blank line is needed between your subject and commit log.

> hw_phymode_configure configures the PORTSC registers and allow the
> following phy_inits to operate on the right parameters. This fix a
> problem
> where the UPLI (ISP1504) could not detected,
					    ^^be

> because the Viewport was not
> available and read the viewport return 0's only.
> 
> Signed-off-by: Chris Ruehl <chris.ruehl@xxxxxxxxxxxx>
> Acked-by: Peter Chen <peter.chen@xxxxxxxxxxxxx>
> ---
>  drivers/usb/chipidea/core.c |    4 ++--
>  1 file changed, 2 insertions(+), 2 deletions(-)
> 
> diff --git a/drivers/usb/chipidea/core.c b/drivers/usb/chipidea/core.c
> index 2834801..43897dd 100644
> --- a/drivers/usb/chipidea/core.c
> +++ b/drivers/usb/chipidea/core.c
> @@ -564,6 +564,8 @@ static int ci_hdrc_probe(struct platform_device *pdev)
>  		return -ENODEV;
>  	}
> 
> +	hw_phymode_configure(ci);
> +
>  	ret = ci_usb_phy_init(ci);
>  	if (ret) {
>  		dev_err(dev, "unable to init phy: %d\n", ret);
> @@ -581,8 +583,6 @@ static int ci_hdrc_probe(struct platform_device *pdev)
> 
>  	ci_get_otg_capable(ci);
> 
> -	hw_phymode_configure(ci);
> -
>  	dr_mode = ci->platdata->dr_mode;
>  	/* initialize role(s) before the interrupt is requested */
>  	if (dr_mode == USB_DR_MODE_OTG || dr_mode == USB_DR_MODE_HOST) {
> --
> 1.7.10.4
> 


--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Linux Media]     [Linux Input]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Old Linux USB Devel Archive]

  Powered by Linux