Linux USB Users

• Thread Index

• Re: [GIT PULL] USB/PHY fixes for 5.6-rc6
  • From: pr-tracker-bot@xxxxxxxxxx
• Re: dvdrw USB3 drive seen as USB2
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• [GIT PULL] USB/PHY fixes for 5.6-rc6
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v7 00/18] Enable Qualcomm QCS 404 HS/SS USB
  • From: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
• Re: [PATCH 2/2] usb: xhci: apply XHCI_SUSPEND_DELAY to AMD XHCI controller 1022:145c
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• Re: dvdrw USB3 drive seen as USB2
  • From: James <bjlockie@xxxxxxxxx>
• Re: dvdrw USB3 drive seen as USB2
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: dvdrw USB3 drive seen as USB2
  • From: James <bjlockie@xxxxxxxxx>
• Re: Error when unloading g_serial module
  • From: Otavio Salvador <otavio.salvador@xxxxxxxxxxxxxxxx>
• Re: dvdrw USB3 drive seen as USB2
  • From: Matthew Dharm <mdharm-usb@xxxxxxxxxxxxxxxxxx>
• [Bug 206779] usb subsystems hang
  • From: bugzilla-daemon@xxxxxxxxxxxxxxxxxxx
• [Bug 206779] New: usb subsystems hang
  • From: bugzilla-daemon@xxxxxxxxxxxxxxxxxxx
• [PATCH] usb: musb: fix crash with highmen PIO and usbmon
  • From: Mans Rullgard <mans@xxxxxxxxx>
• Re: [PATCH v4 3/4] PCI: brcmstb: Wait for Raspberry Pi's firmware when present
  • From: Sergei Shtylyov <sergei.shtylyov@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH v4 4/4] USB: pci-quirks: Add Raspberry Pi 4 quirk
  • From: Sergei Shtylyov <sergei.shtylyov@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH v7 06/18] usb: dwc3: Registering a role switch in the DRD code.
  • From: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
• Error when unloading g_serial module
  • From: Otavio Salvador <otavio.salvador@xxxxxxxxxxxxxxxx>
• dvdrw USB3 drive seen as USB2
  • From: James <bjlockie@xxxxxxxxx>
• [PATCH 4/4] ch341: Simulate break condition on HL340 variant
  • From: Michael Hanselmann <public@xxxxxxxxx>
• [PATCH 3/4] ch341: Limit prescaler on HL340 variant
  • From: Michael Hanselmann <public@xxxxxxxxx>
• [PATCH 2/4] ch341: Detect HL340 variant
  • From: Michael Hanselmann <public@xxxxxxxxx>
• [PATCH 1/4] ch341: Name more registers
  • From: Michael Hanselmann <public@xxxxxxxxx>
• [PATCH 0/4] ch341: Add support for HL340 devices
  • From: Michael Hanselmann <public@xxxxxxxxx>
• Re: Crash while capturing with usbmon
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: Crash while capturing with usbmon
  • From: Måns Rullgård <mans@xxxxxxxxx>
• Re: Crash while capturing with usbmon
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 2/2] USB: cdc-acm: fix rounding error in TIOCSSERIAL
  • From: kbuild test robot <lkp@xxxxxxxxx>
• [PATCH] usb: xhci: Error enumerating USB TV Tuner
  • From: Al Cooper <alcooperx@xxxxxxxxx>
• [PATCH 2/2] usb: xhci: apply XHCI_SUSPEND_DELAY to AMD XHCI controller 1022:145c
  • From: Mathias Nyman <mathias.nyman@xxxxxxxxxxxxxxx>
• [PATCH 1/2] xhci: Do not open code __print_symbolic() in xhci trace events
  • From: Mathias Nyman <mathias.nyman@xxxxxxxxxxxxxxx>
• [PATCH 0/2] xhci fixes for usb-linus
  • From: Mathias Nyman <mathias.nyman@xxxxxxxxxxxxxxx>
• Re: ASM1142 USB 3.1 Gen2 controller from startech(2 port) errors when USB 3.1 Gen2 disk is manipulated
  • From: Nikolay Kichukov <hijacker@xxxxxxxxx>
• Re: Crash while capturing with usbmon
  • From: Måns Rullgård <mans@xxxxxxxxx>
• [PATCH v4 4/4] USB: pci-quirks: Add Raspberry Pi 4 quirk
  • From: Nicolas Saenz Julienne <nsaenzjulienne@xxxxxxx>
• [PATCH v4 3/4] PCI: brcmstb: Wait for Raspberry Pi's firmware when present
  • From: Nicolas Saenz Julienne <nsaenzjulienne@xxxxxxx>
• [PATCH v4 2/4] firmware: raspberrypi: Introduce vl805 init routine
  • From: Nicolas Saenz Julienne <nsaenzjulienne@xxxxxxx>
• [PATCH v4 0/4] USB: pci-quirks: Add Raspberry Pi 4 quirk
  • From: Nicolas Saenz Julienne <nsaenzjulienne@xxxxxxx>
• [PATCH v4 1/4] soc: bcm2835: Sync xHCI reset firmware property with downstream
  • From: Nicolas Saenz Julienne <nsaenzjulienne@xxxxxxx>
• [PATCH] usb: host: xhci-plat: add a shutdown
  • From: Ran Wang <ran.wang_1@xxxxxxx>
• Re: [PATCH] usb: core: Set port link to RxDetect if port is not enabled after resume
  • From: Kai-Heng Feng <kai.heng.feng@xxxxxxxxxxxxx>
• Re: [PATCH] Add a new PID for HP
  • From: Lars Melin <larsm17@xxxxxxxxx>
• [PATCH] usb: dwc3: gadget: Remove incomplete check
  • From: Thinh Nguyen <Thinh.Nguyen@xxxxxxxxxxxx>
• [PATCH] Add a new PID for HP
  • From: Scott Chen <scott@xxxxxxxxxxxx>
• Re: usb: chipidea: udc: BUG: sleeping function called from invalid context
  • From: Dmitry Osipenko <digetx@xxxxxxxxx>
• Re: [PATCH] xhci-mtk: Fix NULL pointer dereference with xhci_irq() for shared_hcd
  • From: Macpaul Lin <macpaul.lin@xxxxxxxxxxxx>
• Re: usb: chipidea: udc: BUG: sleeping function called from invalid context
  • From: Peter Chen <peter.chen@xxxxxxx>
• RE: USB transaction errors causing RCU stalls and kernel panics
  • From: Peter Chen <peter.chen@xxxxxxx>
• [PATCH v2] usb: gadget: aspeed: improve vhub port irq handling
  • From: rentao.bupt@xxxxxxxxx
• [PATCH v3] dt-bindings: Convert usb-connector to YAML format.
  • From: Prashant Malani <pmalani@xxxxxxxxxxxx>
• Re: [PATCH v2] dt-bindings: Convert usb-connector to YAML format.
  • From: Prashant Malani <pmalani@xxxxxxxxxxxx>
• Re: [PATCH v2] dt-bindings: Convert usb-connector to YAML format.
  • From: Prashant Malani <pmalani@xxxxxxxxxxxx>
• Re: [PATCH v2] dt-bindings: Convert usb-connector to YAML format.
  • From: Prashant Malani <pmalani@xxxxxxxxxxxx>
• Re: Crash while capturing with usbmon
  • From: Måns Rullgård <mans@xxxxxxxxx>
• Re: [PATCH v2] dt-bindings: Convert usb-connector to YAML format.
  • From: Rob Herring <robh+dt@xxxxxxxxxx>
• Re: [PATCH v2] dt-bindings: Convert usb-connector to YAML format.
  • From: Rob Herring <robh+dt@xxxxxxxxxx>
• [PATCH 6/6] usb: dwc3: gadget: Refactor dwc3_gadget_ep_dequeue
  • From: Thinh Nguyen <Thinh.Nguyen@xxxxxxxxxxxx>
• [PATCH 5/6] usb: dwc3: gadget: Remove unnecessary checks
  • From: Thinh Nguyen <Thinh.Nguyen@xxxxxxxxxxxx>
• [PATCH 4/6] usb: dwc3: gadget: Give back staled requests
  • From: Thinh Nguyen <Thinh.Nguyen@xxxxxxxxxxxx>
• [PATCH 3/6] usb: dwc3: gadget: Wrap around when skip TRBs
  • From: Thinh Nguyen <Thinh.Nguyen@xxxxxxxxxxxx>
• [PATCH 2/6] usb: dwc3: gadget: Properly handle ClearFeature(halt)
  • From: Thinh Nguyen <Thinh.Nguyen@xxxxxxxxxxxx>
• [PATCH 1/6] usb: dwc3: gadget: Don't clear flags before transfer ended
  • From: Thinh Nguyen <Thinh.Nguyen@xxxxxxxxxxxx>
• [PATCH 0/6] usb: dwc3: gadget: Misc transfer cancellation fixes
  • From: Thinh Nguyen <Thinh.Nguyen@xxxxxxxxxxxx>
• Re: [PATCH v2] dt-bindings: Convert usb-connector to YAML format.
  • From: Stephen Boyd <swboyd@xxxxxxxxxxxx>
• Re: Crash while capturing with usbmon
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 1/1] usb: chipidea: udc: fix sleeping function called from invalid context
  • From: Dmitry Osipenko <digetx@xxxxxxxxx>
• Re: usb: chipidea: udc: BUG: sleeping function called from invalid context
  • From: Dmitry Osipenko <digetx@xxxxxxxxx>
• Re: [PATCH 2/2] USB: cdc-acm: fix rounding error in TIOCSSERIAL
  • From: kbuild test robot <lkp@xxxxxxxxx>
• [PATCH] cdc_ncm: Implement the 32-bit version of NCM Transfer Block
  • From: Alexander Bersenev <bay@xxxxxxxxxxxx>
• Crash while capturing with usbmon
  • From: Måns Rullgård <mans@xxxxxxxxx>
• Re: [PATCH] usb: core: Set port link to RxDetect if port is not enabled after resume
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 2/2] USB: cdc-acm: fix rounding error in TIOCSSERIAL
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] xhci-mtk: Fix NULL pointer dereference with xhci_irq() for shared_hcd
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• [PATCH AUTOSEL 5.5 05/67] HID: hiddev: Fix race in in hiddev_disconnect()
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.5 31/67] net: usb: qmi_wwan: restore mtu min/max values after raw_ip switch
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.4 27/58] net: usb: qmi_wwan: restore mtu min/max values after raw_ip switch
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• WARNING in cxacru_cm/usb_submit_urb
  • From: syzbot <syzbot+00c18ee8497dd3be6ade@xxxxxxxxxxxxxxxxxxxxxxxxx>
• [PATCH AUTOSEL 4.19 13/31] net: usb: qmi_wwan: restore mtu min/max values after raw_ip switch
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.14 11/19] net: usb: qmi_wwan: restore mtu min/max values after raw_ip switch
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.14 05/19] HID: hiddev: Fix race in in hiddev_disconnect()
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.19 05/31] HID: hiddev: Fix race in in hiddev_disconnect()
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.4 05/58] HID: hiddev: Fix race in in hiddev_disconnect()
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• Re: [PATCH 2/2] USB: cdc-acm: fix rounding error in TIOCSSERIAL
  • From: Oliver Neukum <oneukum@xxxxxxxx>
• Re: [PATCH 1/2] USB: cdc-acm: fix close_delay and closing_wait units in TIOCSSERIAL
  • From: Oliver Neukum <oneukum@xxxxxxxx>
• [PATCH 2/2] USB: cdc-acm: fix rounding error in TIOCSSERIAL
  • From: Anthony Mallet <anthony.mallet@xxxxxxx>
• [PATCH 1/2] USB: cdc-acm: fix close_delay and closing_wait units in TIOCSSERIAL
  • From: Anthony Mallet <anthony.mallet@xxxxxxx>
• [PATCH] Add device ids to pl2303 for the HP LD381 Display
  • From: Scott Chen <scott@xxxxxxxxxxxx>
• Re: ASM1142 USB 3.1 Gen2 controller from startech(2 port) errors when USB 3.1 Gen2 disk is manipulated
  • From: Oliver Neukum <oneukum@xxxxxxxx>
• [PATCH] usb: core: Set port link to RxDetect if port is not enabled after resume
  • From: Kai-Heng Feng <kai.heng.feng@xxxxxxxxxxxxx>
• Re: [PATCH] usb: dwc2: Silence warning about supplies during deferred probe
  • From: Minas Harutyunyan <Minas.Harutyunyan@xxxxxxxxxxxx>
• Re: USB DWC2 stops responding when insert/remove cable multiple times
  • From: Minas Harutyunyan <Minas.Harutyunyan@xxxxxxxxxxxx>
• Re: [PATCH] usb: gadget: aspeed: improve vhub port irq handling
  • From: Tao Ren <rentao.bupt@xxxxxxxxx>
• [usb:usb-linus] BUILD SUCCESS 19f3c1e98bd1704fe22e5f8105c0677a1332cdef
  • From: kbuild test robot <lkp@xxxxxxxxx>
• [usb:usb-testing] BUILD SUCCESS 6701adfa9693bd20b89f2cce57754ced2c18ed3b
  • From: kbuild test robot <lkp@xxxxxxxxx>
• Re: [PATCHv2 1/3] devicetree: bindings: exynos: Add new compatible for Exynos5420 dwc3 clocks support
  • From: Anand Moon <linux.amoon@xxxxxxxxx>
• Re: [PATCH] usb: gadget: aspeed: improve vhub port irq handling
  • From: Benjamin Herrenschmidt <benh@xxxxxxxxxxxxxxxxxxx>
• [PATCH v2] dt-bindings: Convert usb-connector to YAML format.
  • From: Prashant Malani <pmalani@xxxxxxxxxxxx>
• Re: [PATCH] xhci-mtk: Fix NULL pointer dereference with xhci_irq() for shared_hcd
  • From: Macpaul Lin <macpaul.lin@xxxxxxxxxxxx>
• Re: [PATCH] dt-bindings: Convert usb-connector to YAML format.
  • From: Prashant Malani <pmalani@xxxxxxxxxxxx>
• [PATCH] usb: gadget: aspeed: improve vhub port irq handling
  • From: rentao.bupt@xxxxxxxxx
• Re: [PATCH v7 7/7] dt-bindings: usb: add documentation for aspeed usb-vhub
  • From: Tao Ren <rentao.bupt@xxxxxxxxx>
• Re: usb: chipidea: udc: BUG: sleeping function called from invalid context
  • From: Peter Chen <peter.chen@xxxxxxx>
• [PATCH 1/1] usb: chipidea: udc: fix sleeping function called from invalid context
  • From: Peter Chen <peter.chen@xxxxxxxxxx>
• ASM1142 USB 3.1 Gen2 controller from startech(2 port) errors when USB 3.1 Gen2 disk is manipulated
  • From: Nikolay Kichukov <hijacker@xxxxxxxxx>
• Re: [PATCH] dt-bindings: Convert usb-connector to YAML format.
  • From: Rob Herring <robh+dt@xxxxxxxxxx>
• Re: [PATCHv2 0/3] Add support for suspend clk for Exynos5422 SoC
  • From: Anand Moon <linux.amoon@xxxxxxxxx>
• [PATCH] dt-bindings: Convert usb-connector to YAML format.
  • From: Prashant Malani <pmalani@xxxxxxxxxxxx>
• Re: [PATCHv2 1/3] devicetree: bindings: exynos: Add new compatible for Exynos5420 dwc3 clocks support
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v2 1/2] dt-bindings: Document JZ4770 PHY bindings
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v7 07/18] dt-bindings: usb: dwc3: Add a gpio-usb-connector example
  • From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
• Re: USB transaction errors causing RCU stalls and kernel panics
  • From: Mathias Nyman <mathias.nyman@xxxxxxxxxxxxxxx>
• Re: [PATCH v7 04/18] dt-bindings: Add Qualcomm USB SuperSpeed PHY bindings
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v7 7/7] dt-bindings: usb: add documentation for aspeed usb-vhub
  • From: Rob Herring <robh@xxxxxxxxxx>
• usb: chipidea: udc: BUG: sleeping function called from invalid context
  • From: Dmitry Osipenko <digetx@xxxxxxxxx>
• Re: Trouble adding QUIRK_ALWAYS_POLL to quirky USB mouse
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v7 07/18] dt-bindings: usb: dwc3: Add a gpio-usb-connector example
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH] xhci-mtk: Fix NULL pointer dereference with xhci_irq() for shared_hcd
  • From: Mathias Nyman <mathias.nyman@xxxxxxxxxxxxxxx>
• Re: USB transaction errors causing RCU stalls and kernel panics
  • From: Oliver Neukum <oneukum@xxxxxxxx>
• Re: USB transaction errors causing RCU stalls and kernel panics
  • From: Mathias Nyman <mathias.nyman@xxxxxxxxxxxxxxx>
• Re: [PATCH v3 4/4] USB: pci-quirks: Add Raspberry Pi 4 quirk
  • From: Nicolas Saenz Julienne <nsaenzjulienne@xxxxxxx>
• Re: driver
  • From: Igor Filippov <igorf777@xxxxxxxxx>
• [PATCH 1/1] usb: serial: option: add ME910G1 ECM composition 0x110b
  • From: Daniele Palmas <dnlplm@xxxxxxxxx>
• Re: USB transaction errors causing RCU stalls and kernel panics
  • From: Oliver Neukum <oneukum@xxxxxxxx>
• Re: [PATCH v3 0/9] usb: typec: Driver for Intel PMC Mux-Agent
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• patch "usb: dwc3: gadget: Update chain bit correctly when using sg list" added to usb-linus
  • From: <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] thunderbolt: Fix error code in tb_port_is_width_supported()
  • From: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>
• Re: [PATCH v1] usb:gadget: Fix issue with config_ep_by_speed function.
  • From: Roger Quadros <rogerq@xxxxxx>
• Re: [PATCH resend] usb: xhci: apply XHCI_SUSPEND_DELAY to AMD XHCI controller 1022:145c
  • From: Mathias Nyman <mathias.nyman@xxxxxxxxxxxxxxx>
• Re: driver
  • From: Greg KH <greg@xxxxxxxxx>
• Re: [PATCH v3 4/4] USB: pci-quirks: Add Raspberry Pi 4 quirk
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH resend] usb: xhci: apply XHCI_SUSPEND_DELAY to AMD XHCI controller 1022:145c
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: usb cdc-acm TIOCSSERIAL may wrongly report EPERM
  • From: Greg KH <greg@xxxxxxxxx>
• Re: [PATCH v2 0/2] usb: cdns3: two fixes for gadget
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCHv2 0/3] Add support for suspend clk for Exynos5422 SoC
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [Patch V5 00/21] Tegra XUSB OTG support
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: USB transaction errors causing RCU stalls and kernel panics
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• [PATCH V4 1/1] USB: serial: f81232: Add generator for F81534A
  • From: "Ji-Ze Hong (Peter Hong)" <hpeter@xxxxxxxxx>
• Re: [PATCH] xhci-mtk: Fix NULL pointer dereference with xhci_irq() for shared_hcd
  • From: Macpaul Lin <macpaul.lin@xxxxxxxxxxxx>
• Re: [PATCH v4] usb: gadget: f_fs: try to fix AIO issue under ARM 64 bit TAGGED mode
  • From: Macpaul Lin <macpaul.lin@xxxxxxxxxxxx>
• Trouble adding QUIRK_ALWAYS_POLL to quirky USB mouse
  • From: Tony Fischetti <tony.fischetti@xxxxxxxxx>
• [Bug 206747] Logitech K400 Plus touchpad is incorrectly recognized as a mouse
  • From: bugzilla-daemon@xxxxxxxxxxxxxxxxxxx
• [Bug 206747] Logitech K400 Plus touchpad is incorrectly recognized as a mouse
  • From: bugzilla-daemon@xxxxxxxxxxxxxxxxxxx
• [Bug 206747] Logitech K400 Plus touchpad is incorrectly recognized as a mouse
  • From: bugzilla-daemon@xxxxxxxxxxxxxxxxxxx
• RE: USB transaction errors causing RCU stalls and kernel panics
  • From: Jonas Karlsson <jonas.karlsson@xxxxxxxx>
• Re: Spurious EHCI interrupts with 5.2 and later on shutdown / init 6 reboot .
  • From: John Donnelly <John.P.Donnelly@xxxxxxxxxx>
• [PATCH v7 01/18] dt-bindings: phy: remove qcom-dwc3-usb-phy
  • From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
• [PATCH v7 02/18] dt-bindings: phy: Add Qualcomm Synopsys Hi-Speed USB PHY binding
  • From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
• [PATCH v7 04/18] dt-bindings: Add Qualcomm USB SuperSpeed PHY bindings
  • From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
• [PATCH v7 03/18] phy: qualcomm: Add Synopsys 28nm Hi-Speed USB PHY driver
  • From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
• [PATCH v7 06/18] usb: dwc3: Registering a role switch in the DRD code.
  • From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
• [PATCH v7 05/18] phy: qualcomm: usb: Add SuperSpeed PHY driver
  • From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
• [PATCH v7 08/18] dt-bindings: usb: dwc3: Add a usb-role-switch to the example
  • From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
• [PATCH v7 10/18] usb: dwc3: Add support for usb-conn-gpio connectors
  • From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
• [PATCH v7 09/18] usb: dwc3: qcom: Add support for usb-conn-gpio connectors
  • From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
• [PATCH v7 11/18] usb: dwc3: Add support for a role-switch notifier
  • From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
• [PATCH v7 13/18] arm64: dts: qcom: qcs404: Add USB devices and PHYs
  • From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
• [PATCH v7 14/18] arm64: dts: qcom: qcs404-evb: Define VBUS pins
  • From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
• [PATCH v7 15/18] arm64: dts: qcom: qcs404-evb: Define USB ID pin
  • From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
• [PATCH v7 17/18] arm64: dts: qcom: qcs404-evb: Raise vreg_l12_3p3 minimum voltage
  • From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
• [PATCH v7 18/18] arm64: dts: qcom: qcs404-evb: Enable USB controllers
  • From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
• [PATCH v7 16/18] arm64: dts: qcom: qcs404-evb: Describe external VBUS regulator
  • From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
• [PATCH v7 12/18] usb: dwc3: qcom: Enable gpio-usb-conn based role-switching
  • From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
• [PATCH v7 07/18] dt-bindings: usb: dwc3: Add a gpio-usb-connector example
  • From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
• [PATCH v7 00/18] Enable Qualcomm QCS 404 HS/SS USB
  • From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
• Re: USB transaction errors causing RCU stalls and kernel panics
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: Spurious EHCI interrupts with 5.2 and later on shutdown / init 6 reboot .
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: Spurious EHCI interrupts with 5.2 and later on shutdown / init 6 reboot .
  • From: John Donnelly <john.p.donnelly@xxxxxxxxxx>
• Re: Spurious EHCI interrupts with 5.2 and later on shutdown / init 6 reboot .
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• USB transaction errors causing RCU stalls and kernel panics
  • From: Jonas Karlsson <jonas.karlsson@xxxxxxxx>
• Re: [PATCH] usb: phy: tegra: Include proper GPIO consumer header to fix compile testing
  • From: Dmitry Osipenko <digetx@xxxxxxxxx>
• Re: [RFC PATCH 1/4] usb: xhci: Synopsys xHC consolidate TRBs
  • From: Mathias Nyman <mathias.nyman@xxxxxxxxxxxxxxx>
• [PATCH] usb: phy: tegra: Include proper GPIO consumer header to fix compile testing
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH v3 0/4] Raspberry Pi 4 VL805 firmware load support
  • From: Nicolas Saenz Julienne <nsaenzjulienne@xxxxxxx>
• Re: [PATCH v3 1/3] usb: core: hub: fix unhandled return by employing a void function
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v3 1/3] usb: core: hub: fix unhandled return by employing a void function
  • From: Eugeniu Rosca <erosca@xxxxxxxxxxxxxx>
• Re: [RFC PATCH 1/4] usb: xhci: Synopsys xHC consolidate TRBs
  • From: Tejas Joglekar <Tejas.Joglekar@xxxxxxxxxxxx>
• [PATCH] thunderbolt: Fix error code in tb_port_is_width_supported()
  • From: Dan Carpenter <dan.carpenter@xxxxxxxxxx>
• Re: [PATCHv2 1/3] devicetree: bindings: exynos: Add new compatible for Exynos5420 dwc3 clocks support
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• RE: [PATCH 2/2] doc: dt-binding: cdns-salvo-phy: add binding doc
  • From: Peter Chen <peter.chen@xxxxxxx>
• Re: [PATCH v3 0/4] Raspberry Pi 4 VL805 firmware load support
  • From: Oliver Neukum <oneukum@xxxxxxxx>
• Re: [PATCH v6 7/7] dt-bindings: usb: add documentation for aspeed usb-vhub
  • From: Tao Ren <rentao.bupt@xxxxxxxxx>
• [PATCH v7 4/7] ARM: dts: aspeed-g6: add usb functions
  • From: rentao.bupt@xxxxxxxxx
• [PATCH v7 3/7] usb: gadget: aspeed: add ast2600 vhub support
  • From: rentao.bupt@xxxxxxxxx
• [PATCH v7 2/7] usb: gadget: aspeed: read vhub properties from device tree
  • From: rentao.bupt@xxxxxxxxx
• [PATCH v7 1/7] usb: gadget: aspeed: support per-vhub usb descriptors
  • From: rentao.bupt@xxxxxxxxx
• [PATCH v7 0/7] aspeed-g6: enable usb support
  • From: rentao.bupt@xxxxxxxxx
• [PATCH v7 6/7] ARM: dts: aspeed-g4: add vhub port and endpoint properties
  • From: rentao.bupt@xxxxxxxxx
• [PATCH v7 7/7] dt-bindings: usb: add documentation for aspeed usb-vhub
  • From: rentao.bupt@xxxxxxxxx
• [PATCH v7 5/7] ARM: dts: aspeed-g5: add vhub port and endpoint properties
  • From: rentao.bupt@xxxxxxxxx
• [PATCH AUTOSEL 5.5 08/66] usb: gadget: serial: fix Tx stall after buffer overflow
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.5 06/66] usb: gadget: composite: Support more than 500mA MaxPower
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.5 07/66] usb: gadget: ffs: ffs_aio_cancel(): Save/restore IRQ flags
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.4 05/58] usb: gadget: composite: Support more than 500mA MaxPower
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.4 07/58] usb: gadget: serial: fix Tx stall after buffer overflow
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.4 06/58] usb: gadget: ffs: ffs_aio_cancel(): Save/restore IRQ flags
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.19 05/32] usb: gadget: composite: Support more than 500mA MaxPower
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.19 06/32] usb: gadget: ffs: ffs_aio_cancel(): Save/restore IRQ flags
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.14 06/22] usb: gadget: serial: fix Tx stall after buffer overflow
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.9 02/13] usb: gadget: composite: Support more than 500mA MaxPower
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.9 04/13] usb: gadget: serial: fix Tx stall after buffer overflow
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.9 03/13] usb: gadget: ffs: ffs_aio_cancel(): Save/restore IRQ flags
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.4 02/11] usb: gadget: ffs: ffs_aio_cancel(): Save/restore IRQ flags
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.4 03/11] usb: gadget: serial: fix Tx stall after buffer overflow
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.14 05/22] usb: gadget: ffs: ffs_aio_cancel(): Save/restore IRQ flags
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.14 04/22] usb: gadget: composite: Support more than 500mA MaxPower
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.19 07/32] usb: gadget: serial: fix Tx stall after buffer overflow
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• Re: [PATCH v6 7/7] dt-bindings: usb: add documentation for aspeed usb-vhub
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: Spurious EHCI interrupts with 5.2 and later on shutdown / init 6 reboot .
  • From: John Donnelly <John.P.Donnelly@xxxxxxxxxx>
• Re: Spurious EHCI interrupts with 5.2 and later on shutdown / init 6 reboot .
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• [RESEND][PATCH v2] usb: dwc3: gadget: Update chain bit correctly when using sg list
  • From: John Stultz <john.stultz@xxxxxxxxxx>
• Re: [PATCH][next] r8152: Replace zero-length array with flexible-array member
  • From: David Miller <davem@xxxxxxxxxxxxx>
• Spurious EHCI interrupts with 5.2 and later on shutdown / init 6 reboot .
  • From: John Donnelly <john.p.donnelly@xxxxxxxxxx>
• Re: [PATCH v9 0/3] arm64: meson: Add support for USB on Amlogic A1
  • From: Kevin Hilman <khilman@xxxxxxxxxxxx>
• Re: [PATCH v4] usb: gadget: f_fs: try to fix AIO issue under ARM 64 bit TAGGED mode
  • From: Catalin Marinas <catalin.marinas@xxxxxxx>
• Re: [PATCH 2/2] doc: dt-binding: cdns-salvo-phy: add binding doc
  • From: Rob Herring <robh@xxxxxxxxxx>
• [PATCH v3 4/4] USB: pci-quirks: Add Raspberry Pi 4 quirk
  • From: Nicolas Saenz Julienne <nsaenzjulienne@xxxxxxx>
• [PATCH v3 2/4] firmware: raspberrypi: Introduce vl805 init routine
  • From: Nicolas Saenz Julienne <nsaenzjulienne@xxxxxxx>
• [PATCH v3 0/4] Raspberry Pi 4 VL805 firmware load support
  • From: Nicolas Saenz Julienne <nsaenzjulienne@xxxxxxx>
• [PATCH v3 1/4] soc: bcm2835: Sync xHCI reset firmware property with downstream
  • From: Nicolas Saenz Julienne <nsaenzjulienne@xxxxxxx>
• [PATCH v3 3/4] PCI: brcmstb: Wait for Raspberry Pi's firmware when present
  • From: Nicolas Saenz Julienne <nsaenzjulienne@xxxxxxx>
• Re: [PATCH 1/1] usb: storage: Add quirk for Samsung Fit flash
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• [PATCH 1/1] usb: storage: Add quirk for Samsung Fit flash
  • From: Jim Lin <jilin@xxxxxxxxxx>
• [PATCH v3 3/9] usb: typec: mux: Allow the mux handles to be requested with fwnode
  • From: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
• [PATCH v3 8/9] usb: typec: Add definitions for Thunderbolt 3 Alternate Mode
  • From: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
• [PATCH v3 9/9] usb: typec: driver for Intel PMC mux control
  • From: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
• [PATCH v3 7/9] device property: Export fwnode_get_name()
  • From: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
• [PATCH v3 6/9] usb: roles: Allow the role switches to be named
  • From: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
• [PATCH v3 5/9] usb: roles: Provide the switch drivers handle to the switch in the API
  • From: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
• [PATCH v3 1/9] usb: typec: mux: Allow the muxes to be named
  • From: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
• [PATCH v3 0/9] usb: typec: Driver for Intel PMC Mux-Agent
  • From: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
• [PATCH v3 4/9] usb: roles: Leave the private driver data pointer to the drivers
  • From: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
• [PATCH v3 2/9] usb: typec: mux: Add helpers for setting the mux state
  • From: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
• Re: BUG: soft lockup in sys_exit_group
  • From: Andrey Konovalov <andreyknvl@xxxxxxxxxx>
• Re: BUG: soft lockup in do_signal
  • From: Andrey Konovalov <andreyknvl@xxxxxxxxxx>
• BUG: soft lockup in do_signal
  • From: syzbot <syzbot+6679cb9a68b09bc3e24a@xxxxxxxxxxxxxxxxxxxxxxxxx>
• [PATCH][next] r8152: Replace zero-length array with flexible-array member
  • From: "Gustavo A. R. Silva" <gustavo@xxxxxxxxxxxxxx>
• [PATCH 2/2] dt-bindings: usb: dwc2: add compatible property for rk3368 usb
  • From: Johan Jonker <jbx6244@xxxxxxxxx>
• [PATCH 1/2] dt-bindings: usb: dwc2: add compatible property for rk3328 usb
  • From: Johan Jonker <jbx6244@xxxxxxxxx>
• RE: [PATCH v2 5/9] usb: roles: Provide the switch drivers handle to the switch in the API
  • From: Peter Chen <peter.chen@xxxxxxx>
• Re: [PATCH v2 5/9] usb: roles: Provide the switch drivers handle to the switch in the API
  • From: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
• Re: [PATCH v2 5/9] usb: roles: Provide the switch drivers handle to the switch in the API
  • From: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
• Re: [PATCH v2 5/9] usb: roles: Provide the switch drivers handle to the switch in the API
  • From: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
• Re: [PATCH v2 5/9] usb: roles: Provide the switch drivers handle to the switch in the API
  • From: Peter Chen <peter.chen@xxxxxxx>
• Re: [PATCH v5 7/7] dt-bindings: usb: add documentation for aspeed usb-vhub
  • From: Benjamin Herrenschmidt <benh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 2/2] doc: dt-binding: cdns-salvo-phy: add binding doc
  • From: Peter Chen <peter.chen@xxxxxxx>
• [PATCHv2 3/3] usb: dwc3: exynos: Add support for Exynos5422 suspend clk
  • From: Anand Moon <linux.amoon@xxxxxxxxx>
• [PATCHv2 2/3] ARM: dts: exynos: Add missing usbdrd3 suspend clk
  • From: Anand Moon <linux.amoon@xxxxxxxxx>
• [PATCHv2 1/3] devicetree: bindings: exynos: Add new compatible for Exynos5420 dwc3 clocks support
  • From: Anand Moon <linux.amoon@xxxxxxxxx>
• [PATCHv2 0/3] Add support for suspend clk for Exynos5422 SoC
  • From: Anand Moon <linux.amoon@xxxxxxxxx>
• Re: [RFT PATCH 1/4] usb: dwc2: Simplify and fix DMA alignment code
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [RFT PATCH 1/4] usb: dwc2: Simplify and fix DMA alignment code
  • From: Antti Seppälä <a.seppala@xxxxxxxxx>
• Re: USB2 device?
  • From: James Lockie <bjlockie@xxxxxxxxx>
• Re: [RFT PATCH 1/4] usb: dwc2: Simplify and fix DMA alignment code
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [RFT PATCH 1/4] usb: dwc2: Simplify and fix DMA alignment code
  • From: Antti Seppälä <a.seppala@xxxxxxxxx>
• Re: USB2 device?
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2] r8152: check disconnect status after long sleep
  • From: David Miller <davem@xxxxxxxxxxxxx>
• Re: [PATCH v4] usb: gadget: f_fs: try to fix AIO issue under ARM 64 bit TAGGED mode
  • From: Macpaul Lin <macpaul.lin@xxxxxxxxxxxx>
• Re: USB2 device?
  • From: James <bjlockie@xxxxxxxxx>
• Re: USB2 device?
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: USB2 device?
  • From: James <bjlockie@xxxxxxxxx>
• Re: USB2 device?
  • From: James <bjlockie@xxxxxxxxx>
• Re: USB2 device?
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v4 3/3] arm64: dts: g12-common: add parkmode_disable_ss_quirk on DWC3 controller
  • From: Kevin Hilman <khilman@xxxxxxxxxxxx>
• Re: USB2 device?
  • From: James <bjlockie@xxxxxxxxx>
• Re: [RFT PATCH 1/4] usb: dwc2: Simplify and fix DMA alignment code
  • From: Antti Seppälä <a.seppala@xxxxxxxxx>
• [PATCH v2 2/2] usb: phy: Add driver for the Ingenic JZ4770 USB transceiver
  • From: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
• [PATCH v2 1/2] dt-bindings: Document JZ4770 PHY bindings
  • From: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
• Re: USB2 device?
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [RFC 2/9] mfd: Add driver for Multifunction USB Device
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [RFT PATCH 1/4] usb: dwc2: Simplify and fix DMA alignment code
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [RFC 2/9] mfd: Add driver for Multifunction USB Device
  • From: Noralf Trønnes <noralf@xxxxxxxxxxx>
• Re: [RFT PATCH 1/4] usb: dwc2: Simplify and fix DMA alignment code
  • From: Antti Seppälä <a.seppala@xxxxxxxxx>
• Re: UCSI:CCG: AMD Platform
  • From: "Shah, Nehal-bakulchandra" <nehal-bakulchandra.shah@xxxxxxx>
• USB2 device?
  • From: James <bjlockie@xxxxxxxxx>
• Re: [RFT PATCH 0/4] usb: dwc2: Fixes and improvements
  • From: Boris ARZUR <boris@xxxxxxxxx>
• Re: [PATCH v4 1/2] dt-bindings: usb: qcom,dwc3: Convert USB DWC3 bindings
  • From: Evan Green <evgreen@xxxxxxxxxxxx>
• Re: [RFT PATCH 1/4] usb: dwc2: Simplify and fix DMA alignment code
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: USB DWC2 stops responding when insert/remove cable multiple times
  • From: Otavio Salvador <otavio.salvador@xxxxxxxxxxxxxxxx>
• Re: [PATCH v4] usb: gadget: f_fs: try to fix AIO issue under ARM 64 bit TAGGED mode
  • From: Catalin Marinas <catalin.marinas@xxxxxxx>
• Re: [RFT PATCH 1/4] usb: dwc2: Simplify and fix DMA alignment code
  • From: Stefan Wahren <stefan.wahren@xxxxxxxx>
• Re: [RFT PATCH 1/4] usb: dwc2: Simplify and fix DMA alignment code
  • From: Doug Anderson <dianders@xxxxxxxxxxxx>
• Re: driver
  • From: Greg KH <greg@xxxxxxxxx>
• driver
  • From: Igor Filippov <igorf777@xxxxxxxxx>
• Re: [PATCH 2/2] doc: dt-binding: cdns-salvo-phy: add binding doc
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: BUG: bad host encryption descriptor; descriptor is too short (1 vs 5 needed)
  • From: Andrey Konovalov <andreyknvl@xxxxxxxxxx>
• Re: BUG: bad host security descriptor; not enough data (1 vs 5 left)
  • From: Andrey Konovalov <andreyknvl@xxxxxxxxxx>
• BUG: bad host security descriptor; not enough data (1 vs 5 left)
  • From: syzbot <syzbot+52be5a94ed1c3d6bf9ce@xxxxxxxxxxxxxxxxxxxxxxxxx>
• BUG: bad host encryption descriptor; descriptor is too short (1 vs 5 needed)
  • From: syzbot <syzbot+2470d4931705e03b0977@xxxxxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] usb: dwc2: Silence warning about supplies during deferred probe
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH] udc: s3c-hsudc: Silence warning about supplies during deferred probe
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• [PATCH v2 1/1] usb: chipidea: udc: add sg list support
  • From: Peter Chen <peter.chen@xxxxxxxxxx>
• Re: [PATCH 0/3] USB IMX Chipidea fix gpio vbus control
  • From: Peter Chen <peter.chen@xxxxxxx>
• RE: [PATCH 2/2] doc: dt-binding: cdns-salvo-phy: add binding doc
  • From: Peter Chen <peter.chen@xxxxxxx>
• [PATCH] udc: s3c-hsudc: Silence warning about supplies during deferred probe
  • From: Marek Szyprowski <m.szyprowski@xxxxxxxxxxx>
• [PATCH] usb: dwc2: Silence warning about supplies during deferred probe
  • From: Marek Szyprowski <m.szyprowski@xxxxxxxxxxx>
• Re: USB DWC2 stops responding when insert/remove cable multiple times
  • From: Minas Harutyunyan <Minas.Harutyunyan@xxxxxxxxxxxx>
• Re: [PATCH v5 7/7] dt-bindings: usb: add documentation for aspeed usb-vhub
  • From: Tao Ren <rentao.bupt@xxxxxxxxx>
• Re: [PATCH 0/3] USB IMX Chipidea fix gpio vbus control
  • From: Marco Felsch <m.felsch@xxxxxxxxxxxxxx>
• Re: [RFT PATCH 1/4] usb: dwc2: Simplify and fix DMA alignment code
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH v5 7/7] dt-bindings: usb: add documentation for aspeed usb-vhub
  • From: Benjamin Herrenschmidt <benh@xxxxxxxxxxxxxxxxxxx>
• RE: [RFC PATCH v2] USB: hub: fix port suspend/resume
  • From: Peter Chen <peter.chen@xxxxxxx>
• Re: [PATCH 0/3] USB IMX Chipidea fix gpio vbus control
  • From: Peter Chen <peter.chen@xxxxxxx>
• Re: [PATCH v4 7/7] dt-bindings: usb: add documentation for aspeed usb-vhub
  • From: Tao Ren <rentao.bupt@xxxxxxxxx>
• [PATCH v6 7/7] dt-bindings: usb: add documentation for aspeed usb-vhub
  • From: rentao.bupt@xxxxxxxxx
• [PATCH v6 6/7] ARM: dts: aspeed-g4: add vhub port and endpoint properties
  • From: rentao.bupt@xxxxxxxxx
• [PATCH v6 5/7] ARM: dts: aspeed-g5: add vhub port and endpoint properties
  • From: rentao.bupt@xxxxxxxxx
• [PATCH v6 4/7] ARM: dts: aspeed-g6: add usb functions
  • From: rentao.bupt@xxxxxxxxx
• [PATCH v6 3/7] usb: gadget: aspeed: add ast2600 vhub support
  • From: rentao.bupt@xxxxxxxxx
• [PATCH v6 2/7] usb: gadget: aspeed: read vhub properties from device tree
  • From: rentao.bupt@xxxxxxxxx
• [PATCH v6 0/7] aspeed-g6: enable usb support
  • From: rentao.bupt@xxxxxxxxx
• [PATCH v6 1/7] usb: gadget: aspeed: support per-vhub usb descriptors
  • From: rentao.bupt@xxxxxxxxx
• Re: [PATCH v5 7/7] dt-bindings: usb: add documentation for aspeed usb-vhub
  • From: Tao Ren <rentao.bupt@xxxxxxxxx>
• Re: [RFT PATCH 4/4] usb: dwc2: Make "trimming xfer length" a debug message
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [RFT PATCH 3/4] usb: dwc2: Abort transaction after errors with unknown reason
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [RFT PATCH 2/4] usb: dwc2: Do not update data length if it is 0 on inbound transfers
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH v5 7/7] dt-bindings: usb: add documentation for aspeed usb-vhub
  • From: Benjamin Herrenschmidt <benh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v4 7/7] dt-bindings: usb: add documentation for aspeed usb-vhub
  • From: Tao Ren <rentao.bupt@xxxxxxxxx>
• [PATCH v5 4/7] ARM: dts: aspeed-g6: add usb functions
  • From: rentao.bupt@xxxxxxxxx
• [PATCH v5 7/7] dt-bindings: usb: add documentation for aspeed usb-vhub
  • From: rentao.bupt@xxxxxxxxx
• [PATCH v5 6/7] ARM: dts: aspeed-g4: add vhub port and endpoint properties
  • From: rentao.bupt@xxxxxxxxx
• [PATCH v5 5/7] ARM: dts: aspeed-g5: add vhub port and endpoint properties
  • From: rentao.bupt@xxxxxxxxx
• [PATCH v5 3/7] usb: gadget: aspeed: add ast2600 vhub support
  • From: rentao.bupt@xxxxxxxxx
• [PATCH v5 2/7] usb: gadget: aspeed: read vhub properties from device tree
  • From: rentao.bupt@xxxxxxxxx
• [PATCH v5 1/7] usb: gadget: aspeed: support per-vhub usb descriptors
  • From: rentao.bupt@xxxxxxxxx
• [PATCH v5 0/7] aspeed-g6: enable usb support
  • From: rentao.bupt@xxxxxxxxx
• Re: [PATCH v4 7/7] dt-bindings: usb: add documentation for aspeed usb-vhub
  • From: Tao Ren <rentao.bupt@xxxxxxxxx>
• Re: [PATCH v4 6/7] ARM: dts: aspeed-g4: add vhub port and endpoint properties
  • From: Tao Ren <rentao.bupt@xxxxxxxxx>
• Re: [PATCH v4 2/7] usb: gadget: aspeed: read vhub properties from device tree
  • From: Tao Ren <rentao.bupt@xxxxxxxxx>
• Re: [RFT PATCH 1/4] usb: dwc2: Simplify and fix DMA alignment code
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [RFT PATCH 4/4] usb: dwc2: Make "trimming xfer length" a debug message
  • From: Doug Anderson <dianders@xxxxxxxxxxxx>
• Re: [RFT PATCH 3/4] usb: dwc2: Abort transaction after errors with unknown reason
  • From: Doug Anderson <dianders@xxxxxxxxxxxx>
• Re: [RFT PATCH 2/4] usb: dwc2: Do not update data length if it is 0 on inbound transfers
  • From: Doug Anderson <dianders@xxxxxxxxxxxx>
• Re: [RFT PATCH 1/4] usb: dwc2: Simplify and fix DMA alignment code
  • From: Doug Anderson <dianders@xxxxxxxxxxxx>
• RE: [PATCH] usb: typec: ucsi_ccg: workaround for NVIDIA test device
  • From: Ajay Gupta <ajayg@xxxxxxxxxx>
• [PATCH v2] usb: typec: ucsi_ccg: workaround for NVIDIA test device
  • From: Ajay Gupta <ajaykuee@xxxxxxxxx>
• Re: [RFC PATCH v2] USB: hub: fix port suspend/resume
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [Patch V5 00/21] Tegra XUSB OTG support
  • From: Thierry Reding <thierry.reding@xxxxxxxxx>
• Re: [PATCH 2/2] doc: dt-binding: cdns-salvo-phy: add binding doc
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: UCSI:CCG: AMD Platform
  • From: "Shah, Nehal-bakulchandra" <nehal-bakulchandra.shah@xxxxxxx>
• Re: [PATCH v4 7/7] dt-bindings: usb: add documentation for aspeed usb-vhub
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [RFC PATCH v2] USB: hub: fix port suspend/resume
  • From: Marco Felsch <m.felsch@xxxxxxxxxxxxxx>
• Re: [RFC PATCH v2] USB: hub: fix port suspend/resume
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v1 0/3] kcov: collect coverage from usb soft interrupts
  • From: Andrey Konovalov <andreyknvl@xxxxxxxxxx>
• Re: [PATCH 0/3] USB IMX Chipidea fix gpio vbus control
  • From: Marco Felsch <m.felsch@xxxxxxxxxxxxxx>
• BUG: soft lockup in sys_exit_group
  • From: syzbot <syzbot+cce32521ee0a824c21f7@xxxxxxxxxxxxxxxxxxxxxxxxx>
• KASAN: use-after-free Read in load_firmware_cb
  • From: syzbot <syzbot+434bc1054077aac11da3@xxxxxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] usb: typec: ucsi_ccg: workaround for NVIDIA test device
  • From: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
• [PATCH 5.5 042/150] usb: dwc3: gadget: Check for IOC/LST bit in TRB->ctrl fields
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• [PATCH 5.4 035/135] usb: dwc3: gadget: Check for IOC/LST bit in TRB->ctrl fields
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• [PATCH 4.19 30/97] usb: dwc3: gadget: Check for IOC/LST bit in TRB->ctrl fields
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] usb: typec: ucsi_ccg: workaround for NVIDIA test device
  • From: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
• RE: [PATCH 0/3] USB IMX Chipidea fix gpio vbus control
  • From: Peter Chen <peter.chen@xxxxxxx>
• [RFC PATCH v2] USB: hub: fix port suspend/resume
  • From: Marco Felsch <m.felsch@xxxxxxxxxxxxxx>
• RE: [PATCH 0/3] USB IMX Chipidea fix gpio vbus control
  • From: Peter Chen <peter.chen@xxxxxxx>
• Re: [PATCH 0/3] USB IMX Chipidea fix gpio vbus control
  • From: Marco Felsch <m.felsch@xxxxxxxxxxxxxx>
• Re: UCSI:CCG: AMD Platform
  • From: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
• Re: [PATCH 0/3] USB IMX Chipidea fix gpio vbus control
  • From: Peter Chen <peter.chen@xxxxxxx>
• Re: [PATCH 0/3] USB IMX Chipidea fix gpio vbus control
  • From: Marco Felsch <m.felsch@xxxxxxxxxxxxxx>
• Re: [PATCH 0/3] USB IMX Chipidea fix gpio vbus control
  • From: Peter Chen <peter.chen@xxxxxxx>
• [PATCH 3/3] Revert "usb: chipidea: add a flag for turn on vbus early for host"
  • From: Marco Felsch <m.felsch@xxxxxxxxxxxxxx>
• [PATCH 1/3] USB: ehci-hub: let port_power() override the ehci_port_power()
  • From: Marco Felsch <m.felsch@xxxxxxxxxxxxxx>
• [PATCH 0/3] USB IMX Chipidea fix gpio vbus control
  • From: Marco Felsch <m.felsch@xxxxxxxxxxxxxx>
• [PATCH 2/3] Partially Revert "usb: chipidea: host: turn on vbus before add hcd if early vbus on is required"
  • From: Marco Felsch <m.felsch@xxxxxxxxxxxxxx>
• Re: [PATCH v4] usb: gadget: f_fs: try to fix AIO issue under ARM 64 bit TAGGED mode
  • From: Macpaul Lin <macpaul.lin@xxxxxxxxxxxx>
• Re: [PATCH v4] usb: gadget: f_fs: try to fix AIO issue under ARM 64 bit TAGGED mode
  • From: Catalin Marinas <catalin.marinas@xxxxxxx>
• [RFC PATCH] USB: hub: fix port suspend/resume
  • From: Marco Felsch <m.felsch@xxxxxxxxxxxxxx>
• Re: [PATCH] usb: usb251xb: check if hub is already attached
  • From: Marco Felsch <m.felsch@xxxxxxxxxxxxxx>
• Re: [PATCH] usb: usb251xb: check if hub is already attached
  • From: Richard Leitner <richard.leitner@xxxxxxxxxxx>
• Re: [RFC 2/9] mfd: Add driver for Multifunction USB Device
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [External] Re: [PATCH v2 5/8] usb: mausb_host: Introduce PAL processing
  • From: Vladimir Stankovic <vladimir.stankovic@xxxxxxxxxxxxxxx>
• Re: [PATCH] usb: usb251xb: check if hub is already attached
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• Re: [PATCH] usb: usb251xb: check if hub is already attached
  • From: Richard Leitner <richard.leitner@xxxxxxxxxxx>
• Re: [PATCH] usb: usb251xb: check if hub is already attached
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• Re: [PATCH v4] usb: typec: Add sysfs node to show cc orientation
  • From: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
• [PATCH] usb: usb251xb: check if hub is already attached
  • From: Marco Felsch <m.felsch@xxxxxxxxxxxxxx>
• [PATCH 2/2] doc: dt-binding: cdns-salvo-phy: add binding doc
  • From: Peter Chen <peter.chen@xxxxxxx>
• [PATCH 1/2] phy: cadence: salvo: add salvo phy driver
  • From: Peter Chen <peter.chen@xxxxxxx>
• Re: [PATCH v4 5/7] ARM: dts: aspeed-g5: add vhub port and endpoint properties
  • From: Joel Stanley <joel@xxxxxxxxx>
• Re: [PATCH v4 6/7] ARM: dts: aspeed-g4: add vhub port and endpoint properties
  • From: Joel Stanley <joel@xxxxxxxxx>
• Re: [PATCH v4 4/7] ARM: dts: aspeed-g6: add usb functions
  • From: Joel Stanley <joel@xxxxxxxxx>
• Re: [PATCH v4 7/7] dt-bindings: usb: add documentation for aspeed usb-vhub
  • From: Joel Stanley <joel@xxxxxxxxx>
• Re: [PATCH v4 5/7] ARM: dts: aspeed-g5: add vhub port and endpoint properties
  • From: Benjamin Herrenschmidt <benh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v4 6/7] ARM: dts: aspeed-g4: add vhub port and endpoint properties
  • From: Benjamin Herrenschmidt <benh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v4 4/7] ARM: dts: aspeed-g6: add usb functions
  • From: Benjamin Herrenschmidt <benh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v4 3/7] usb: gadget: aspeed: add ast2600 vhub support
  • From: Benjamin Herrenschmidt <benh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v4 2/7] usb: gadget: aspeed: read vhub properties from device tree
  • From: Benjamin Herrenschmidt <benh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v4 7/7] dt-bindings: usb: add documentation for aspeed usb-vhub
  • From: Benjamin Herrenschmidt <benh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v4 1/7] usb: gadget: aspeed: support per-vhub usb descriptors
  • From: Benjamin Herrenschmidt <benh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] usb: host: xhci-tegra: Tegra186/Tegra194 LPM
  • From: JC Kuo <jckuo@xxxxxxxxxx>
• Re: [PATCH v1 0/3] kcov: collect coverage from usb soft interrupts
  • From: Andrew Morton <akpm@xxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2 0/2] usb: cdns3: two fixes for gadget
  • From: Peter Chen <hzpeterchen@xxxxxxxxx>
• [PATCH v4 2/7] usb: gadget: aspeed: read vhub properties from device tree
  • From: rentao.bupt@xxxxxxxxx
• [PATCH v4 3/7] usb: gadget: aspeed: add ast2600 vhub support
  • From: rentao.bupt@xxxxxxxxx
• [PATCH v4 1/7] usb: gadget: aspeed: support per-vhub usb descriptors
  • From: rentao.bupt@xxxxxxxxx
• [PATCH v4 4/7] ARM: dts: aspeed-g6: add usb functions
  • From: rentao.bupt@xxxxxxxxx
• [PATCH v4 0/7] aspeed-g6: enable usb support
  • From: rentao.bupt@xxxxxxxxx
• [PATCH v4 7/7] dt-bindings: usb: add documentation for aspeed usb-vhub
  • From: rentao.bupt@xxxxxxxxx
• [PATCH v4 6/7] ARM: dts: aspeed-g4: add vhub port and endpoint properties
  • From: rentao.bupt@xxxxxxxxx
• [PATCH v4 5/7] ARM: dts: aspeed-g5: add vhub port and endpoint properties
  • From: rentao.bupt@xxxxxxxxx
• [Bug 206649] Lenovo C940 - USB3 disk not detected if connected after boot - no space for [mem size 0x00010000]
  • From: bugzilla-daemon@xxxxxxxxxxxxxxxxxxx
• [RFT PATCH 4/4] usb: dwc2: Make "trimming xfer length" a debug message
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• [RFT PATCH 1/4] usb: dwc2: Simplify and fix DMA alignment code
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• [RFT PATCH 3/4] usb: dwc2: Abort transaction after errors with unknown reason
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• [RFT PATCH 2/4] usb: dwc2: Do not update data length if it is 0 on inbound transfers
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• [RFT PATCH 0/4] usb: dwc2: Fixes and improvements
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH v4] usb: typec: Add sysfs node to show cc orientation
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH v3] usb: typec: Add sysfs node to show cc orientation
  • From: Badhri Jagan Sridharan <badhri@xxxxxxxxxx>
• [PATCH v4] usb: typec: Add sysfs node to show cc orientation
  • From: Badhri Jagan Sridharan <badhri@xxxxxxxxxx>
• [PATCH v1 3/3] usb: core: kcov: collect coverage from usb complete callback
  • From: Andrey Konovalov <andreyknvl@xxxxxxxxxx>
• [PATCH v1 2/3] kcov: collect coverage from interrupts
  • From: Andrey Konovalov <andreyknvl@xxxxxxxxxx>
• [PATCH v1 1/3] kcov: cleanup debug messages
  • From: Andrey Konovalov <andreyknvl@xxxxxxxxxx>
• [PATCH v1 0/3] kcov: collect coverage from usb soft interrupts
  • From: Andrey Konovalov <andreyknvl@xxxxxxxxxx>
• Re: [PATCH RFC 1/2] kcov: collect coverage from interrupts
  • From: Andrey Konovalov <andreyknvl@xxxxxxxxxx>
• Re: [PATCH v3] usb: typec: Add sysfs node to show cc orientation
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH v3] usb: typec: Add sysfs node to show cc orientation
  • From: Badhri Jagan Sridharan <badhri@xxxxxxxxxx>
• [PATCH v3] usb: typec: Add sysfs node to show cc orientation
  • From: Badhri Jagan Sridharan <badhri@xxxxxxxxxx>
• Re: [PATCH v3 1/3] usb: core: hub: fix unhandled return by employing a void function
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] usb: hub: Fix unhandled return value of usb_autopm_get_interface()
  • From: Eugeniu Rosca <erosca@xxxxxxxxxxxxxx>
• [PATCH v3 3/3] usb: core: port: do error out if usb_autopm_get_interface() fails
  • From: Eugeniu Rosca <erosca@xxxxxxxxxxxxxx>
• [PATCH v3 2/3] usb: core: hub: do error out if usb_autopm_get_interface() fails
  • From: Eugeniu Rosca <erosca@xxxxxxxxxxxxxx>
• [PATCH v3 1/3] usb: core: hub: fix unhandled return by employing a void function
  • From: Eugeniu Rosca <erosca@xxxxxxxxxxxxxx>
• Re: r8151: check disconnect status after long sleep
  • From: You-Sheng Yang <vicamo.yang@xxxxxxxxxxxxx>
• [PATCH v2] r8152: check disconnect status after long sleep
  • From: You-Sheng Yang <vicamo@xxxxxxxxx>
• Re: [PATCH v2 1/8] usb: Add MA-USB Host kernel module
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2 0/8] Add MA USB Host driver
  • From: Oliver Neukum <oneukum@xxxxxxxx>
• [PATCH] usb: quirks: add NO_LPM quirk for Logitech Screen Share
  • From: Gustavo Padovan <gustavo.padovan@xxxxxxxxxxxxx>
• Re: [PATCH v2 5/8] usb: mausb_host: Introduce PAL processing
  • From: Oliver Neukum <oneukum@xxxxxxxx>
• Re: [PATCH v2 5/8] usb: mausb_host: Introduce PAL processing
  • From: Oliver Neukum <oneukum@xxxxxxxx>
• [PATCH v4] usb: gadget: f_fs: try to fix AIO issue under ARM 64 bit TAGGED mode
  • From: Macpaul Lin <macpaul.lin@xxxxxxxxxxxx>
• Re: [PATCH 2/2] USB: core: Fix potential memory leak in usb_get_configuration()
  • From: Johan Hovold <johan@xxxxxxxxxx>
• Re: [PATCH 1/2] USB: core: Fix build warning in usb_get_configuration()
  • From: Johan Hovold <johan@xxxxxxxxxx>
• [PATCH v2 8/8] usb: mausb_host: Process MA USB data packets
  • From: Vladimir Stankovic <vladimir.stankovic@xxxxxxxxxxxxxxx>
• [PATCH v2 7/8] usb: mausb_host: MA USB PAL events processing
  • From: Vladimir Stankovic <vladimir.stankovic@xxxxxxxxxxxxxxx>
• [PATCH v2 6/8] usb: mausb_host: Add logic for PAL-to-PAL communication
  • From: Vladimir Stankovic <vladimir.stankovic@xxxxxxxxxxxxxxx>
• [PATCH v2 5/8] usb: mausb_host: Introduce PAL processing
  • From: Vladimir Stankovic <vladimir.stankovic@xxxxxxxxxxxxxxx>
• [PATCH v2 4/8] usb: mausb_host: Implement initial hub handlers
  • From: Vladimir Stankovic <vladimir.stankovic@xxxxxxxxxxxxxxx>
• [PATCH v2 3/8] usb: mausb_host: HCD initialization
  • From: Vladimir Stankovic <vladimir.stankovic@xxxxxxxxxxxxxxx>
• [PATCH v2 2/8] usb: mausb_host: Add link layer implementation
  • From: Vladimir Stankovic <vladimir.stankovic@xxxxxxxxxxxxxxx>
• [PATCH v2 1/8] usb: Add MA-USB Host kernel module
  • From: Vladimir Stankovic <vladimir.stankovic@xxxxxxxxxxxxxxx>
• [PATCH v2 0/8] Add MA USB Host driver
  • From: Vladimir Stankovic <vladimir.stankovic@xxxxxxxxxxxxxxx>
• Re: [PATCH] usb: host: xhci-tegra: Tegra186/Tegra194 LPM
  • From: Mathias Nyman <mathias.nyman@xxxxxxxxxxxxxxx>
• Re: [PATCH 2/2] USB: core: Fix potential memory leak in usb_get_configuration()
  • From: Tiezhu Yang <yangtiezhu@xxxxxxxxxxx>
• Re: [PATCH 1/2] USB: core: Fix build warning in usb_get_configuration()
  • From: Tiezhu Yang <yangtiezhu@xxxxxxxxxxx>
• Re: [PATCH] usb: host: xhci-tegra: Tegra186/Tegra194 LPM
  • From: JC Kuo <jckuo@xxxxxxxxxx>
• Re: [PATCH 2/2] USB: core: Fix potential memory leak in usb_get_configuration()
  • From: Johan Hovold <johan@xxxxxxxxxx>
• Re: [PATCH] usb: usb251xb: fix regulator probe and error handling
  • From: Richard Leitner <richard.leitner@xxxxxxxxxxx>
• Re: [PATCH 1/2] USB: core: Fix build warning in usb_get_configuration()
  • From: Johan Hovold <johan@xxxxxxxxxx>
• [PATCH] usb: usb251xb: fix regulator probe and error handling
  • From: Marco Felsch <m.felsch@xxxxxxxxxxxxxx>
• [PATCH 2/2] USB: core: Fix potential memory leak in usb_get_configuration()
  • From: Tiezhu Yang <yangtiezhu@xxxxxxxxxxx>
• [PATCH 1/2] USB: core: Fix build warning in usb_get_configuration()
  • From: Tiezhu Yang <yangtiezhu@xxxxxxxxxxx>
• Re: [PATCH] usb: hub: Fix unhandled return value of usb_autopm_get_interface()
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] usb: hub: Fix unhandled return value of usb_autopm_get_interface()
  • From: Eugeniu Rosca <erosca@xxxxxxxxxxxxxx>
• Re: [PATCH] usb: hub: Fix unhandled return value of usb_autopm_get_interface()
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] usb: hub: Fix unhandled return value of usb_autopm_get_interface()
  • From: Eugeniu Rosca <erosca@xxxxxxxxxxxxxx>
• [PATCH v2] usb: hub: Fix unhandled return value of usb_autopm_get_interface()
  • From: Eugeniu Rosca <erosca@xxxxxxxxxxxxxx>
• [PATCH v8 6/6] usb: dwc3: Rework resets initialization to be more flexible
  • From: John Stultz <john.stultz@xxxxxxxxxx>
• [PATCH v8 5/6] usb: dwc3: Rework clock initialization to be more flexible
  • From: John Stultz <john.stultz@xxxxxxxxxx>
• [PATCH v8 4/6] dt-bindings: usb: dwc3: Allow clock list & resets to be more flexible
  • From: John Stultz <john.stultz@xxxxxxxxxx>
• [PATCH v8 3/6] usb: dwc3: Add support for role-switch-default-mode binding
  • From: John Stultz <john.stultz@xxxxxxxxxx>
• [PATCH v8 2/6] dt-bindings: usb: generic: Add role-switch-default-mode binding
  • From: John Stultz <john.stultz@xxxxxxxxxx>
• [PATCH v8 1/6] usb: dwc3: Registering a role switch in the DRD code.
  • From: John Stultz <john.stultz@xxxxxxxxxx>
• [PATCH v8 0/6] dwc3 dependencies for HiKey960 USB
  • From: John Stultz <john.stultz@xxxxxxxxxx>
• Re: [PATCH] usb: hub: Fix unhandled return value of usb_autopm_get_interface()
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• RE: [PATCH] usb: gadget: udc-xilinx: Fix xudc_stop() kernel-doc format
  • From: Peter Chen <peter.chen@xxxxxxx>
• [PATCH] usb: hub: Fix unhandled return value of usb_autopm_get_interface()
  • From: Eugeniu Rosca <erosca@xxxxxxxxxxxxxx>
• Re: [PATCH v3] usb: gadget: f_fs: try to fix AIO issue under ARM 64 bit TAGGED mode
  • From: Catalin Marinas <catalin.marinas@xxxxxxx>
• Re: [PATCH] usb: gadget: udc-xilinx: Fix xudc_stop() kernel-doc format
  • From: Michal Simek <monstr@xxxxxxxxx>
• Re: [PATCH V3 6/6] USB: serial: f81232: Add generator for F81534A
  • From: Johan Hovold <johan@xxxxxxxxxx>
• Re: [PATCH V3 4/6] USB: serial: f81232: Add F81534A support
  • From: Johan Hovold <johan@xxxxxxxxxx>
• Re: [PATCH v3] usb: gadget: f_fs: try to fix AIO issue under ARM 64 bit TAGGED mode
  • From: Miles Chen <miles.chen@xxxxxxxxxxxx>
• [PATCH v3] usb: gadget: f_fs: try to fix AIO issue under ARM 64 bit TAGGED mode
  • From: Macpaul Lin <macpaul.lin@xxxxxxxxxxxx>
• Re: [PATCH 2/2] USB: serial: fix tty cleanup op kernel-doc
  • From: Johan Hovold <johan@xxxxxxxxxx>
• [PATCH 1/2] USB: serial: clean up carrier-detect helper
  • From: Johan Hovold <johan@xxxxxxxxxx>
• [PATCH 2/2] USB: serial: fix tty cleanup op kernel-doc
  • From: Johan Hovold <johan@xxxxxxxxxx>
• [PATCH 0/2] USB: serial: clean up some kernel doc
  • From: Johan Hovold <johan@xxxxxxxxxx>
• Re: [PATCH] USB: serial: Add vizzini driver for Exar USB2 serial adapters
  • From: Johan Hovold <johan@xxxxxxxxxx>
• Re: [PATCH] USB: Replace zero-length array with flexible-array member
  • From: Johan Hovold <johan@xxxxxxxxxx>
• Re: [PATCH v2] usb: gadget: f_fs: try to fix AIO issue under ARM 64 bit TAGGED mode
  • From: Peter Chen <peter.chen@xxxxxxx>
• [PATCH 1/1] usb: chipidea: udc: add sg list support
  • From: Peter Chen <peter.chen@xxxxxxxxxx>
• Re: Driver fault
  • From: Lars Melin <larsm17@xxxxxxxxx>
• Re: [PATCH] usb: dwc2: extend treatment for incomplete transfer
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH v2] usb: dwc3: gadget: Update chain bit correctly when using sg list
  • From: John Stultz <john.stultz@xxxxxxxxxx>
• Re: r8151: check disconnect status after long sleep
  • From: Prashant Malani <pmalani@xxxxxxxxxxxx>
• Re: r8151: check disconnect status after long sleep
  • From: David Miller <davem@xxxxxxxxxxxxx>
• Re: [PATCH] usb: gadget: udc: bdc: Remove unnecessary NULL checks in bdc_req_complete
  • From: Nick Desaulniers <ndesaulniers@xxxxxxxxxx>
• Driver fault
  • From: PLENTY <plentypvp@xxxxxxxxx>
• Re: [PATCH] usb: musb: remove redundant assignment to variable ret
  • From: Bin Liu <b-liu@xxxxxx>
• [usb:usb-testing] BUILD SUCCESS 24e6aea4801bae1dce3b16da6bc64fc06742ac14
  • From: kbuild test robot <lkp@xxxxxxxxx>
• Re: [PATCH v6 0/1] usb: gadget: add raw-gadget interface
  • From: Andrey Konovalov <andreyknvl@xxxxxxxxxx>
• Re: WARNING in dummy_free_request
  • From: Andrey Konovalov <andreyknvl@xxxxxxxxxx>
• [PATCH 2/2] usb: phy: Add driver for the Ingenic JZ4770 USB transceiver
  • From: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
• [PATCH 1/2] dt-bindings: Document JZ4770 PHY bindings
  • From: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
• [PATCH v6 1/1] usb: gadget: add raw-gadget interface
  • From: Andrey Konovalov <andreyknvl@xxxxxxxxxx>
• [PATCH v6 0/1] usb: gadget: add raw-gadget interface
  • From: Andrey Konovalov <andreyknvl@xxxxxxxxxx>
• Re: [PATCH v2 7/9] device property: Export fwnode_get_name()
  • From: "Rafael J. Wysocki" <rafael@xxxxxxxxxx>
• Re: WARNING in dummy_free_request
  • From: Andrey Konovalov <andreyknvl@xxxxxxxxxx>
• Re: [PATCH] usb: typec: tcpm: move to SNK_UNATTACHED if sink removed for DRP
  • From: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
• Re: BUG: bad host encryption descriptor; descriptor is too short (3 vs 5 needed)
  • From: Andrey Konovalov <andreyknvl@xxxxxxxxxx>
• BUG: bad host encryption descriptor; descriptor is too short (3 vs 5 needed)
  • From: syzbot <syzbot+069037c83014b5536cb7@xxxxxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2 5/9] usb: roles: Provide the switch drivers handle to the switch in the API
  • From: Peter Chen <peter.chen@xxxxxxx>
• Re: [PATCH] usb: host: xhci-tegra: Tegra186/Tegra194 LPM
  • From: Thierry Reding <thierry.reding@xxxxxxxxx>
• [PATCH v2 0/9] usb: typec: Driver for Intel PMC Mux-Agent
  • From: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
• [PATCH v2 2/9] usb: typec: mux: Add helpers for setting the mux state
  • From: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
• [PATCH v2 6/9] usb: roles: Allow the role switches to be named
  • From: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
• [PATCH v2 4/9] usb: roles: Leave the private driver data pointer to the drivers
  • From: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
• [PATCH v2 9/9] usb: typec: driver for Intel PMC mux control
  • From: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
• [PATCH v2 8/9] usb: typec: Add definitions for Thunderbolt 3 Alternate Mode
  • From: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
• [PATCH v2 7/9] device property: Export fwnode_get_name()
  • From: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
• [PATCH v2 5/9] usb: roles: Provide the switch drivers handle to the switch in the API
  • From: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
• [PATCH v2 3/9] usb: typec: mux: Allow the mux handles to be requested with fwnode
  • From: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
• [PATCH v2 1/9] usb: typec: mux: Allow the muxes to be named
  • From: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
• Re: [PATCH] usb: host: xhci-tegra: Tegra186/Tegra194 LPM
  • From: Mathias Nyman <mathias.nyman@xxxxxxxxxxxxxxx>
• [usb:usb-testing] BUILD SUCCESS 6bc3f3979edce0b11deb685a4c817abb7d74b227
  • From: kbuild test robot <lkp@xxxxxxxxx>
• Re: [PATCH v2 RESEND] phy: allwinner: Fix GENMASK misuse
  • From: Maxime Ripard <maxime@xxxxxxxxxx>
• Re: UCSI:CCG: AMD Platform
  • From: "Shah, Nehal-bakulchandra" <nehal-bakulchandra.shah@xxxxxxx>
• r8151: check disconnect status after long sleep
  • From: You-Sheng Yang <vicamo.yang@xxxxxxxxxxxxx>
• [PATCH] usb: host: xhci-tegra: Tegra186/Tegra194 LPM
  • From: JC Kuo <jckuo@xxxxxxxxxx>
• [PATCH v2 5/5] usb: musb: jz4740: Add support for the JZ4770
  • From: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
• [PATCH v2 4/5] usb: musb: jz4740: Unconditionally depend on devicetree
  • From: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
• [PATCH v2 3/5] usb: musb: jz4740: Register USB role switch
  • From: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
• [PATCH v2 2/5] usb: musb: jz4740: Add support for DMA
  • From: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
• [PATCH v2 1/5] dt-bindings: usb: Convert jz4740-musb doc to YAML
  • From: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
• [Bug 206649] Lenovo C940 - USB3 disk not detected if connected after boot - no space for [mem size 0x00010000]
  • From: bugzilla-daemon@xxxxxxxxxxxxxxxxxxx
• [Bug 206649] Lenovo C940 - USB3 disk not detected if connected after boot - no space for [mem size 0x00010000]
  • From: bugzilla-daemon@xxxxxxxxxxxxxxxxxxx
• [Bug 206649] Lenovo C940 - USB3 disk not detected if connected after boot
  • From: bugzilla-daemon@xxxxxxxxxxxxxxxxxxx
• [Bug 206649] New: Lenovo C940 - USB3 disk not detected if connected after boot
  • From: bugzilla-daemon@xxxxxxxxxxxxxxxxxxx
• Re: [RFC 8/9] drm/client: Add drm_client_init_from_id() and drm_client_modeset_set()
  • From: Daniel Vetter <daniel@xxxxxxxx>
• Re: [PATCH] usb: dwc2: extend treatment for incomplete transfer
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH] usb: dwc2: extend treatment for incomplete transfer
  • From: Antti Seppälä <a.seppala@xxxxxxxxx>
• Re: [PATCH] usb: fhci: use list_first_entry() instead of list_entry()
  • From: kbuild test robot <lkp@xxxxxxxxx>
• Re: [RFC 8/9] drm/client: Add drm_client_init_from_id() and drm_client_modeset_set()
  • From: Noralf Trønnes <noralf@xxxxxxxxxxx>
• [PATCH v2] usb: gadget: f_fs: try to fix AIO issue under ARM 64 bit TAGGED mode
  • From: Macpaul Lin <macpaul.lin@xxxxxxxxxxxx>
• [PATCH] usb: fhci: use list_first_entry() instead of list_entry()
  • From: qiwuchen55@xxxxxxxxx
• Re: [PATCH] usb: dwc2: extend treatment for incomplete transfer
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH] usb: dwc2: extend treatment for incomplete transfer
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH] lib: iov_iter.c: fix a possible calculation error on remaining bytes
  • From: Macpaul Lin <macpaul.lin@xxxxxxxxxxxx>
• Re: fuse freeze and usb devices
  • From: "taz.007" <taz.007@xxxxxxxx>
• Re: [PATCH] usb: dwc2: extend treatment for incomplete transfer
  • From: Boris ARZUR <boris@xxxxxxxxx>
• Re: [PATCH] usb: dwc2: extend treatment for incomplete transfer
  • From: Boris ARZUR <boris@xxxxxxxxx>
• Re: [PATCH] usb: dwc2: extend treatment for incomplete transfer
  • From: Antti Seppälä <a.seppala@xxxxxxxxx>
• [Bug 206271] Trackpoint stops working after updating from Kernel 5.4.11 to 5.4.12
  • From: bugzilla-daemon@xxxxxxxxxxxxxxxxxxx
• Re: [PATCH] Support Castles Vega5000 PoS terminal USB
  • From: Ondřej Jirman <megous@xxxxxxxxxx>
• Re: [PATCH] ch341: Replace memory allocations with stack storage
  • From: Michael Hanselmann <public@xxxxxxxxx>
• Re: [PATCH] ch341: Replace memory allocations with stack storage
  • From: Greg KH <greg@xxxxxxxxx>
• [PATCH] usb: gadget: f_fs: try to fix AIO issue under ARM 64 bit TAGGED mode
  • From: Macpaul Lin <macpaul.lin@xxxxxxxxxxxx>
• Re: [linux-sunxi] [PATCH v2 RESEND] phy: allwinner: Fix GENMASK misuse
  • From: Chen-Yu Tsai <wens@xxxxxxxx>
• Re: [PATCH] Support Castles Vega5000 PoS terminal USB
  • From: Lars Melin <larsm17@xxxxxxxxx>
• [PATCH AUTOSEL 5.5 12/58] qmi_wwan: unconditionally reject 2 ep interfaces
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.5 11/58] qmi_wwan: re-add DW5821e pre-production variant
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.4 11/50] qmi_wwan: unconditionally reject 2 ep interfaces
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.4 10/50] qmi_wwan: re-add DW5821e pre-production variant
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.19 09/25] qmi_wwan: unconditionally reject 2 ep interfaces
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.19 08/25] qmi_wwan: re-add DW5821e pre-production variant
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.14 06/21] qmi_wwan: re-add DW5821e pre-production variant
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.14 07/21] qmi_wwan: unconditionally reject 2 ep interfaces
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.9 05/16] qmi_wwan: re-add DW5821e pre-production variant
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH] Support Castles Vega5000 PoS terminal USB
  • From: Ondrej Jirman <megous@xxxxxxxxxx>
• Re: [Bug 11159] reset high speed USB device using ehci_hcd
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• [PATCH] usb: musb: remove redundant assignment to variable ret
  • From: Colin King <colin.king@xxxxxxxxxxxxx>
• [Bug 206639] snd-usb-audio Thinkpad10 gen2 TabletDock analog audio device quirky
  • From: bugzilla-daemon@xxxxxxxxxxxxxxxxxxx
• [Bug 206639] New: snd-usb-audio Thinkpad10 gen2 TabletDock analog audio device quirky
  • From: bugzilla-daemon@xxxxxxxxxxxxxxxxxxx
• Re: [PATCH] ch341: Replace memory allocations with stack storage
  • From: Johan Hovold <johan@xxxxxxxxxx>
• Re: [GIT PULL] USB/Thunderbolt fixes for 5.6-rc3
  • From: pr-tracker-bot@xxxxxxxxxx
• [PATCH] ch341: Replace memory allocations with stack storage
  • From: Michael Hanselmann <public@xxxxxxxxx>
• Re: fuse freeze and usb devices
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: WARNING in dummy_free_request
  • From: Andrey Konovalov <andreyknvl@xxxxxxxxxx>
• fuse freeze and usb devices
  • From: "taz.007" <taz.007@xxxxxxxx>
• Re: WARNING in dummy_free_request
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• WARNING in dummy_free_request
  • From: syzbot <syzbot+55ae006e0a1feae5aeab@xxxxxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2] usb: gadget: net2280: Distribute switch variables for initialization
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: USB DWC2 stops responding when insert/remove cable multiple times
  • From: Otavio Salvador <otavio.salvador@xxxxxxxxxxxxxxxx>
• Re: 5G but should be 10G?
  • From: Mathias Nyman <mathias.nyman@xxxxxxxxxxxxxxx>
• [GIT PULL] USB/Thunderbolt fixes for 5.6-rc3
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• [usb:usb-testing] BUILD SUCCESS 2f41c8a25feb822203f92e17f3720397805d0cfd
  • From: kbuild test robot <lkp@xxxxxxxxx>
• [PATCH v4 2/3] usb: dwc3: core: add support for disabling SS instances in park mode
  • From: Neil Armstrong <narmstrong@xxxxxxxxxxxx>
• [PATCH v4 3/3] arm64: dts: g12-common: add parkmode_disable_ss_quirk on DWC3 controller
  • From: Neil Armstrong <narmstrong@xxxxxxxxxxxx>
• [PATCH v4 1/3] doc: dt: bindings: usb: dwc3: Update entries for disabling SS instances in park mode
  • From: Neil Armstrong <narmstrong@xxxxxxxxxxxx>
• [PATCH v4 0/3] usb: dwc3: parkmode_disable_ss_quirk on DWC3 controller
  • From: Neil Armstrong <narmstrong@xxxxxxxxxxxx>
• Re: [PATCH v3 0/3] usb: dwc3: parkmode_disable_ss_quirk on DWC3 controller
  • From: Neil Armstrong <narmstrong@xxxxxxxxxxxx>
• Re: [PATCH v3 2/3] usb: dwc3: gadget: Add support for disabling SS instances in park mode
  • From: Neil Armstrong <narmstrong@xxxxxxxxxxxx>
• Re: [PATCH] usb: host: xhci-plat: add XHCI_MISSING_CAS quirk
  • From: Martin Kepplinger <martin.kepplinger@xxxxxxx>
• Re: linux-next: build warning in Linus' tree
  • From: "Gustavo A. R. Silva" <gustavo@xxxxxxxxxxxxxx>
• Re: USB DWC2 stops responding when insert/remove cable multiple times
  • From: Minas Harutyunyan <Minas.Harutyunyan@xxxxxxxxxxxx>
• Re: [PATCH] usb: gadget: udc: bdc: Remove unnecessary NULL checks in bdc_req_complete
  • From: Nathan Chancellor <natechancellor@xxxxxxxxx>
• linux-next: build warning in Linus' tree
  • From: Stephen Rothwell <sfr@xxxxxxxxxxxxxxxx>
• Re: [PATCH v3 2/3] usb: dwc3: gadget: Add support for disabling SS instances in park mode
  • From: Jun Li <lijun.kernel@xxxxxxxxx>
• Re: [PATCH v3 0/5] aspeed-g6: enable usb support
  • From: Tao Ren <rentao.bupt@xxxxxxxxx>
• Re: [PATCH 2/2] usb: gadget: aspeed: fixup usb1 device descriptor at init time
  • From: Tao Ren <rentao.bupt@xxxxxxxxx>
• Re: [PATCH 1/2] usb: gadget: aspeed: allow to customize vhub device IDs/strings
  • From: Tao Ren <rentao.bupt@xxxxxxxxx>
• [PATCH v2] usb: gadget: net2280: Distribute switch variables for initialization
  • From: Kees Cook <keescook@xxxxxxxxxxxx>
• [usb:usb-next] BUILD SUCCESS 57a5e5f936be583d2c6cef3661c169e3ea4bf922
  • From: kbuild test robot <lkp@xxxxxxxxx>
• [usb:usb-linus] BUILD SUCCESS 8b978be8d067f58b29cbbf0579e88bb4a2d4350a
  • From: kbuild test robot <lkp@xxxxxxxxx>
• Re: USB questions
  • From: James <bjlockie@xxxxxxxxx>
• 5G but should be 10G?
  • From: James <bjlockie@xxxxxxxxx>
• Re: [PATCH] usb: dwc2: extend treatment for incomplete transfer
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: functionfs gadget with multiple endpoints
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: functionfs gadget with multiple endpoints
  • From: Belisko Marek <marek.belisko@xxxxxxxxx>
• Re: [PATCH v2 3/4] PCI: brcmstb: Wait for Raspberry Pi's firmware when present
  • From: Florian Fainelli <f.fainelli@xxxxxxxxx>
• Re: [PATCH v2 3/4] PCI: brcmstb: Wait for Raspberry Pi's firmware when present
  • From: Nicolas Saenz Julienne <nsaenzjulienne@xxxxxxx>
• RE: [PATCH] usb: xhci: enable interrupt only after xhci_start()
  • From: Ajay Gupta <ajayg@xxxxxxxxxx>
• Re: [PATCH v2 2/4] firmware: raspberrypi: Introduce vl805 init routine
  • From: Nicolas Saenz Julienne <nsaenzjulienne@xxxxxxx>
• Re: [PATCH] usbnet: optimize barrier usage for Rmw atomic bitops
  • From: Davidlohr Bueso <dave@xxxxxxxxxxxx>
• RE: [PATCH] usb: host: xhci-plat: add XHCI_MISSING_CAS quirk
  • From: Jun Li <jun.li@xxxxxxx>
• Re: [PATCH] usb: gadget: net2280: Distribute switch variables for initialization
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: functionfs gadget with multiple endpoints
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: USB questions
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• [PATCH] USB: Replace zero-length array with flexible-array member
  • From: "Gustavo A. R. Silva" <gustavo@xxxxxxxxxxxxxx>
• Re: [PATCH] usb: xhci: enable interrupt only after xhci_start()
  • From: Mathias Nyman <mathias.nyman@xxxxxxxxxxxxxxx>
• Re: USB DWC2 stops responding when insert/remove cable multiple times
  • From: Otavio Salvador <otavio.salvador@xxxxxxxxxxxxxxxx>
• Re: [PATCH] usb: host: xhci-plat: add XHCI_MISSING_CAS quirk
  • From: Martin Kepplinger <martin.kepplinger@xxxxxxx>
• Re: usb cdc-acm TIOCSSERIAL may wrongly report EPERM
  • From: Oliver Neukum <oneukum@xxxxxxxx>
• Re: usb cdc-acm TIOCSSERIAL may wrongly report EPERM
  • From: Greg KH <greg@xxxxxxxxx>
• Re: usb cdc-acm TIOCSSERIAL may wrongly report EPERM
  • From: Oliver Neukum <oneukum@xxxxxxxx>
• Re: USB questions
  • From: Greg KH <greg@xxxxxxxxx>
• functionfs gadget with multiple endpoints
  • From: Belisko Marek <marek.belisko@xxxxxxxxx>
• Re: USB DWC2 stops responding when insert/remove cable multiple times
  • From: Minas Harutyunyan <Minas.Harutyunyan@xxxxxxxxxxxx>
• RE: [PATCH] usb: host: xhci-plat: add XHCI_MISSING_CAS quirk
  • From: Jun Li <jun.li@xxxxxxx>
• [PATCH] usb: gadget: net2280: Distribute switch variables for initialization
  • From: Kees Cook <keescook@xxxxxxxxxxxx>
• [PATCH v2] usb: dwc3: gadget: Update chain bit correctly when using sg list
  • From: John Stultz <john.stultz@xxxxxxxxxx>
• Re: [PATCH 2/2] usb: gadget: aspeed: fixup usb1 device descriptor at init time
  • From: Benjamin Herrenschmidt <benh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 1/2] usb: gadget: aspeed: allow to customize vhub device IDs/strings
  • From: Benjamin Herrenschmidt <benh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v3 0/5] aspeed-g6: enable usb support
  • From: Tao Ren <rentao.bupt@xxxxxxxxx>
• Re: [PATCH v3 0/5] aspeed-g6: enable usb support
  • From: "Andrew Jeffery" <andrew@xxxxxxxx>
• Re: [PATCH] dt-bindings: usb: exynos-usb: Document clock names for DWC3 bindings
  • From: Rob Herring <robh@xxxxxxxxxx>
• USB questions
  • From: James <bjlockie@xxxxxxxxx>
• Re: [PATCH] usb: dwc2: extend treatment for incomplete transfer
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH v2 3/4] PCI: brcmstb: Wait for Raspberry Pi's firmware when present
  • From: Florian Fainelli <florian.fainelli@xxxxxxxxxxxx>
• Re: [PATCH net-next v2 0/13] net: core: add helper tcp_v6_gso_csum_prep
  • From: David Miller <davem@xxxxxxxxxxxxx>
• Re: [PATCH v2 1/4] soc: bcm2835: Sync xHCI reset firmware property with downstream
  • From: Florian Fainelli <f.fainelli@xxxxxxxxx>
• Re: [PATCH v2 2/4] firmware: raspberrypi: Introduce vl805 init routine
  • From: Florian Fainelli <f.fainelli@xxxxxxxxx>
• [Bug 206603] New: Regression: Thunderbolt 3 Dock USB not working when connecting it for the second time
  • From: bugzilla-daemon@xxxxxxxxxxxxxxxxxxx
• [PATCH] usb: host: xhci-plat: add XHCI_MISSING_CAS quirk
  • From: Martin Kepplinger <martin.kepplinger@xxxxxxx>
• Re: [PATCH] usb: typec: tcpm: move to SNK_UNATTACHED if sink removed for DRP
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• [PATCH] usb: dwc3: core: don't do suspend for device mode if already suspended
  • From: jun.li@xxxxxxx
• [PATCH] usb: typec: tcpm: move to SNK_UNATTACHED if sink removed for DRP
  • From: jun.li@xxxxxxx
• Re: USB DWC2 stops responding when insert/remove cable multiple times
  • From: Otavio Salvador <otavio.salvador@xxxxxxxxxxxxxxxx>
• [PATCH v3 3/3] arm64: dts: g12-common: add parkmode_disable_ss_quirk on DWC3 controller
  • From: Neil Armstrong <narmstrong@xxxxxxxxxxxx>
• [PATCH v3 2/3] usb: dwc3: gadget: Add support for disabling SS instances in park mode
  • From: Neil Armstrong <narmstrong@xxxxxxxxxxxx>
• [PATCH v3 1/3] doc: dt: bindings: usb: dwc3: Update entries for disabling SS instances in park mode
  • From: Neil Armstrong <narmstrong@xxxxxxxxxxxx>
• [PATCH v3 0/3] usb: dwc3: parkmode_disable_ss_quirk on DWC3 controller
  • From: Neil Armstrong <narmstrong@xxxxxxxxxxxx>
• [PATCH v2 2/2] usb: cdns3: gadget: toggle cycle bit before reset endpoint
  • From: Peter Chen <peter.chen@xxxxxxx>
• [PATCH v2 1/2] usb: cdns3: gadget: link trb should point to next request
  • From: Peter Chen <peter.chen@xxxxxxx>
• [PATCH v2 0/2] usb: cdns3: two fixes for gadget
  • From: Peter Chen <peter.chen@xxxxxxx>
• Re: [PATCH 5/9] usb: roles: Provide the switch drivers handle to the switch in the API
  • From: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
• Re: [PATCH] usb: dwc3: meson-g12a: Don't use ret uninitialized in dwc3_meson_g12a_otg_init
  • From: Neil Armstrong <narmstrong@xxxxxxxxxxxx>
• Re: [PATCH v9 3/3] arm64: dts: meson: a1: Enable USB2 PHY and DWC3 controller
  • From: Neil Armstrong <narmstrong@xxxxxxxxxxxx>
• Re: [PATCH 5/9] usb: roles: Provide the switch drivers handle to the switch in the API
  • From: Peter Chen <peter.chen@xxxxxxx>
• Re: [PATCH 5/9] usb: roles: Provide the switch drivers handle to the switch in the API
  • From: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
• [PATCH v2 0/4] Raspberry Pi 4 VL805 firmware load support
  • From: Nicolas Saenz Julienne <nsaenzjulienne@xxxxxxx>
• [PATCH v2 1/4] soc: bcm2835: Sync xHCI reset firmware property with downstream
  • From: Nicolas Saenz Julienne <nsaenzjulienne@xxxxxxx>
• [PATCH v2 3/4] PCI: brcmstb: Wait for Raspberry Pi's firmware when present
  • From: Nicolas Saenz Julienne <nsaenzjulienne@xxxxxxx>
• [PATCH v2 2/4] firmware: raspberrypi: Introduce vl805 init routine
  • From: Nicolas Saenz Julienne <nsaenzjulienne@xxxxxxx>
• [PATCH v2 4/4] USB: pci-quirks: Add Raspberry Pi 4 quirk
  • From: Nicolas Saenz Julienne <nsaenzjulienne@xxxxxxx>
• Re: USB DWC2 stops responding when insert/remove cable multiple times
  • From: Minas Harutyunyan <Minas.Harutyunyan@xxxxxxxxxxxx>
• Re: msm_hsusb 78d9000.usb: failed to create device link to ci_hdrc.0.ulpi
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: usb cdc-acm TIOCSSERIAL may wrongly report EPERM
  • From: Anthony Mallet <anthony.mallet@xxxxxxx>
• Re: msm_hsusb 78d9000.usb: failed to create device link to ci_hdrc.0.ulpi
  • From: Alexandre Torgue <alexandre.torgue@xxxxxx>
• Re: usb cdc-acm TIOCSSERIAL may wrongly report EPERM
  • From: Oliver Neukum <oneukum@xxxxxxxx>
• RE: [PATCH net-next v2 12/13] r8152: use new helper tcp_v6_gso_csum_prep
  • From: Hayes Wang <hayeswang@xxxxxxxxxxx>
• Re: [PATCH] usb: dwc3: gadget: Update chain bit correctly when using sg list
  • From: Felipe Balbi <balbi@xxxxxxxxxx>
• [PATCH 1/1] usb: chipidea: otg: handling vbus disconnect event occurred during system suspend
  • From: Peter Chen <peter.chen@xxxxxxx>
• Re: msm_hsusb 78d9000.usb: failed to create device link to ci_hdrc.0.ulpi
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH] xhci: Do not open code __print_symbolic() in xhci trace events
  • From: Mathias Nyman <mathias.nyman@xxxxxxxxxxxxxxx>
• Re: [PATCH 00/20] usb: remove useless cast for driver.name
  • From: Johan Hovold <johan@xxxxxxxxxx>
• Re: msm_hsusb 78d9000.usb: failed to create device link to ci_hdrc.0.ulpi
  • From: Jack Pham <jackp@xxxxxxxxxxxxxx>
• Re: [PATCH 5/9] usb: roles: Provide the switch drivers handle to the switch in the API
  • From: Peter Chen <peter.chen@xxxxxxx>
• Re: msm_hsusb 78d9000.usb: failed to create device link to ci_hdrc.0.ulpi
  • From: Peter Chen <peter.chen@xxxxxxx>