Re: [PATCH v4 3/9] usb: dwc3: Increase timeout for CmdAct cleared by device controller

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



John Stultz <john.stultz@xxxxxxxxxx> 于2020年5月7日周四 上午6:27写道:
>
> On Wed, May 6, 2020 at 2:00 AM Jun Li <lijun.kernel@xxxxxxxxx> wrote:
> > John Stultz <john.stultz@xxxxxxxxxx> 于2019年10月30日周三 上午5:18写道:
> > > On Tue, Oct 29, 2019 at 2:11 AM Felipe Balbi <balbi@xxxxxxxxxx> wrote:
> > > > John Stultz <john.stultz@xxxxxxxxxx> writes:
> > > > > From: Yu Chen <chenyu56@xxxxxxxxxx>
> > > > >
> > > > > It needs more time for the device controller to clear the CmdAct of
> > > > > DEPCMD on Hisilicon Kirin Soc.
> > > >
> > > > Why does it need more time? Why is it so that no other platform needs
> > > > more time, only this one? And which command, specifically, causes
> > > > problem?
> >
> > Sorry for my back to this so late.
> >
> > This change is required on my dwc3 based HW too, I gave a check
> > and the reason is suspend_clk is used in case the PIPE phy is at P3,
> > this slow clock makes my EP command below timeout.
> >
> > dwc3_gadget_ep_cmd: ep0out: cmd 'Set Endpoint Configuration' [401]
> > params 00001000 00000500 00000000 --> status: Timed Out
> >
> > Success case takes about 400us to complete, see below trace(44.286278
> > - 44.285897 = 0.000381):
> >
> > configfs_acm.sh-822   [000] d..1    44.285896: dwc3_writel: addr
> > 000000006d59aae1 value 00000401
> > configfs_acm.sh-822   [000] d..1    44.285897: dwc3_readl: addr
> > 000000006d59aae1 value 00000401
> > ... ...
> > configfs_acm.sh-822   [000] d..1    44.286278: dwc3_readl: addr
> > 000000006d59aae1 value 00000001
> > configfs_acm.sh-822   [000] d..1    44.286279: dwc3_gadget_ep_cmd:
> > ep0out: cmd 'Set Endpoint Configuration' [401] params 00001000
> > 00000500 00000000 --> status: Successful
> >
> > Hi John,
> >
> > Do you still have this problem? if yes, What's the value of
> > USBLNKST[21:18] when the timeout happens?
>
> Sorry. As I mentioned, I was working to upstream a patchset that I
> hadn't created, so the context I had was limited. As I couldn't
> reproduce an issue without the change on the device I had, I figured
> it would be best to drop it.

That was fine.
>
> However, as you have some analysis and rational for why such a change
> would be needed, I don't have an objection to it. Do you want to
> resubmit the patch with your explanation and detailed log above in the
> commit message?

Sure, I will resubmit the patch with my explanation added in commit message.

thanks
Li Jun
>
> thanks
> -john




[Index of Archives]     [Linux Media]     [Linux Input]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Old Linux USB Devel Archive]

  Powered by Linux