Sorry, didn't compose the Commit message quite right, have sent out v2.
Thanks,
On Tue, Apr 28, 2020 at 10:34 PM Prashant Malani <pmalani@xxxxxxxxxxxx> wrote:
>
> According to the PMC Type C Subsystem (TCSS) Mux programming guide rev
> 0.6, when a device is transitioning to DP Alternate Mode state, if the
> HPD_LVL in the status update command VDO is set, the HPD_HIGH field in
> the Alternate Mode request “mode_data” field (bit 14) should also be
> set. Ensure the bit is correctly handled while issuing the Alternate
> Mode request.
>
> Signed-off-by: Prashant Malani <pmalani@xxxxxxxxxxxx>
> Fixes: 6701adfa9693 ("usb: typec: driver for Intel PMC mux control")
> ---
> drivers/usb/typec/mux/intel_pmc_mux.c | 4 ++++
> 1 file changed, 4 insertions(+)
>
> diff --git a/drivers/usb/typec/mux/intel_pmc_mux.c b/drivers/usb/typec/mux/intel_pmc_mux.c
> index f5c5e0aef66f..c599112559e7 100644
> --- a/drivers/usb/typec/mux/intel_pmc_mux.c
> +++ b/drivers/usb/typec/mux/intel_pmc_mux.c
> @@ -157,6 +157,10 @@ pmc_usb_mux_dp(struct pmc_usb_port *port, struct typec_mux_state *state)
> req.mode_data |= (state->mode - TYPEC_STATE_MODAL) <<
> PMC_USB_ALTMODE_DP_MODE_SHIFT;
>
> + if (data->status & DP_STATUS_HPD_STATE)
> + req.mode_data |= PMC_USB_DP_HPD_LVL <<
> + PMC_USB_ALTMODE_DP_MODE_SHIFT;
> +
> return pmc_usb_command(port, (void *)&req, sizeof(req));
> }
>
> --
> 2.26.2.303.gf8c07b1a785-goog
>
