According to the PMC Type C Subsystem (TCSS) Mux programming guide rev
0.6, when a device is transitioning to DP Alternate Mode state, if the
HPD_STATE (bit 7) field in the status update command VDO is set to
HPD_HIGH, the HPD_HIGH field in the Alternate Mode request “mode_data”
field (bit 14) should also be set. Ensure the bit is correctly handled
while issuing the Alternate Mode request.
Signed-off-by: Prashant Malani <pmalani@xxxxxxxxxxxx>
Fixes: 6701adfa9693 ("usb: typec: driver for Intel PMC mux control")
---
Changes in v2:
- Clarified the commit message to mention the proper field names.
drivers/usb/typec/mux/intel_pmc_mux.c | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/drivers/usb/typec/mux/intel_pmc_mux.c b/drivers/usb/typec/mux/intel_pmc_mux.c
index f5c5e0aef66f..c599112559e7 100644
--- a/drivers/usb/typec/mux/intel_pmc_mux.c
+++ b/drivers/usb/typec/mux/intel_pmc_mux.c
@@ -157,6 +157,10 @@ pmc_usb_mux_dp(struct pmc_usb_port *port, struct typec_mux_state *state)
req.mode_data |= (state->mode - TYPEC_STATE_MODAL) <<
PMC_USB_ALTMODE_DP_MODE_SHIFT;
+ if (data->status & DP_STATUS_HPD_STATE)
+ req.mode_data |= PMC_USB_DP_HPD_LVL <<
+ PMC_USB_ALTMODE_DP_MODE_SHIFT;
+
return pmc_usb_command(port, (void *)&req, sizeof(req));
}
--
2.26.2.303.gf8c07b1a785-goog
