[PATCH 1/1] usb: chipidea: msm: Ensure proper controller reset using role switch API

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: Bryan O'Donoghue <bryan.odonoghue@xxxxxxxxxx>

Currently we check to make sure there is no error state on the extcon
handle for VBUS when writing to the HS_PHY_GENCONFIG_2 register. When using
the USB role-switch API we still need to write to this register absent an
extcon handle.

This patch makes the appropriate update to ensure the write happens if
role-switching is true.

Fixes: 05559f10ed79 ("usb: chipidea: add role switch class support")

Cc: Peter Chen <Peter.Chen@xxxxxxx>
Cc: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
Cc: Philipp Zabel <p.zabel@xxxxxxxxxxxxxx>
Cc: linux-usb@xxxxxxxxxxxxxxx
Cc: linux-kernel@xxxxxxxxxxxxxxx
Cc: Stephen Boyd <swboyd@xxxxxxxxxxxx>
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@xxxxxxxxxx>
Signed-off-by: Peter Chen <peter.chen@xxxxxxx>
---
 drivers/usb/chipidea/ci_hdrc_msm.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/usb/chipidea/ci_hdrc_msm.c b/drivers/usb/chipidea/ci_hdrc_msm.c
index af648ba6544d..46105457e1ca 100644
--- a/drivers/usb/chipidea/ci_hdrc_msm.c
+++ b/drivers/usb/chipidea/ci_hdrc_msm.c
@@ -114,7 +114,7 @@ static int ci_hdrc_msm_notify_event(struct ci_hdrc *ci, unsigned event)
 			hw_write_id_reg(ci, HS_PHY_GENCONFIG_2,
 					HS_PHY_ULPI_TX_PKT_EN_CLR_FIX, 0);
 
-		if (!IS_ERR(ci->platdata->vbus_extcon.edev)) {
+		if (!IS_ERR(ci->platdata->vbus_extcon.edev) || ci->role_switch) {
 			hw_write_id_reg(ci, HS_PHY_GENCONFIG_2,
 					HS_PHY_SESS_VLD_CTRL_EN,
 					HS_PHY_SESS_VLD_CTRL_EN);
-- 
2.17.1




[Index of Archives]     [Linux Media]     [Linux Input]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Old Linux USB Devel Archive]

  Powered by Linux