On Mon, 4 May 2020, Kai-Heng Feng wrote:
> Etron EJ168 USB 3.0 Host Controller stops working after S3, if it was
> runtime suspended previously:
> [ 370.080359] pci 0000:02:00.0: can't change power state from D3cold to D0 (config space inaccessible)
> [ 370.080477] xhci_hcd 0000:04:00.0: can't change power state from D3cold to D0 (config space inaccessible)
> [ 370.080532] pcieport 0000:00:1c.0: DPC: containment event, status:0x1f05 source:0x0200
> [ 370.080533] pcieport 0000:00:1c.0: DPC: ERR_FATAL detected
> [ 370.080536] xhci_hcd 0000:04:00.0: can't change power state from D3hot to D0 (config space inaccessible)
> [ 370.080552] xhci_hcd 0000:04:00.0: AER: can't recover (no error_detected callback)
> [ 370.080566] usb usb3: root hub lost power or was reset
> [ 370.080566] usb usb4: root hub lost power or was reset
> [ 370.080572] xhci_hcd 0000:04:00.0: Host halt failed, -19
> [ 370.080574] xhci_hcd 0000:04:00.0: Host not accessible, reset failed.
> [ 370.080575] xhci_hcd 0000:04:00.0: PCI post-resume error -19!
> [ 370.080586] xhci_hcd 0000:04:00.0: HC died; cleaning up
>
> This can be fixed by not runtime suspend the controller at all.
>
> So disable runtime suspend for EJ168 xHCI device.
>
> Signed-off-by: Kai-Heng Feng <kai.heng.feng@xxxxxxxxxxxxx>
> ---
> v2:
> - Use a new quirk to avoid changing existing behavior.
>
> drivers/usb/host/xhci-pci.c | 4 +++-
> drivers/usb/host/xhci.h | 1 +
> 2 files changed, 4 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/usb/host/xhci-pci.c b/drivers/usb/host/xhci-pci.c
> index 766b74723e64..1658fa4c3e4e 100644
> --- a/drivers/usb/host/xhci-pci.c
> +++ b/drivers/usb/host/xhci-pci.c
> @@ -227,6 +227,7 @@ static void xhci_pci_quirks(struct device *dev, struct xhci_hcd *xhci)
> xhci->quirks |= XHCI_RESET_ON_RESUME;
> xhci->quirks |= XHCI_TRUST_TX_LENGTH;
> xhci->quirks |= XHCI_BROKEN_STREAMS;
> + xhci->quirks |= XHCI_DISABLE_RUNTIME_SUSPEND;
> }
> if (pdev->vendor == PCI_VENDOR_ID_RENESAS &&
> pdev->device == 0x0014) {
> @@ -371,7 +372,8 @@ static int xhci_pci_probe(struct pci_dev *dev, const struct pci_device_id *id)
> xhci->shared_hcd->can_do_streams = 1;
>
> /* USB-2 and USB-3 roothubs initialized, allow runtime pm suspend */
> - pm_runtime_put_noidle(&dev->dev);
> + if (!(xhci->quirks & XHCI_DISABLE_RUNTIME_SUSPEND))
> + pm_runtime_put_noidle(&dev->dev);
This cannot possibly be correct. You have changed an unconditional
runtime-put to a conditional one, but you have not made the
corresponding change to the matching runtime-get. Every runtime-PM
put must be balanced by a get, and vice versa.
Alan Stern
