On Tue, May 5, 2020 at 5:26 PM Andrey Konovalov <andreyknvl@xxxxxxxxxx> wrote:
>
> On Tue, May 5, 2020 at 2:08 PM Andrey Konovalov <andreyknvl@xxxxxxxxxx> wrote:
> >
> > On Tue, May 5, 2020 at 9:34 AM Felipe Balbi <balbi@xxxxxxxxxx> wrote:
> > >
> > >
> > > Hi,
> > >
> > > Andrey Konovalov <andreyknvl@xxxxxxxxxx> writes:
> > >
> > > > Currently automatic gadget endpoint selection based on required features
> > > > doesn't work. Raw Gadget tries iterating over the list of available
> > > > endpoints and finding one that has the right direction and transfer type.
> > > > Unfortunately selecting arbitrary gadget endpoints (even if they satisfy
> > > > feature requirements) doesn't work, as (depending on the UDC driver) they
> > > > might have fixed addresses, and one also needs to provide matching
> > > > endpoint addresses in the descriptors sent to the host.
> > > >
> > > > The composite framework deals with this by assigning endpoint addresses
> > > > in usb_ep_autoconfig() before enumeration starts. This approach won't work
> > > > with Raw Gadget as the endpoints are supposed to be enabled after a
> > > > set_configuration/set_interface request from the host, so it's too late to
> > > > patch the endpoint descriptors that had already been sent to the host.
> > > >
> > > > For Raw Gadget we take another approach. Similarly to GadgetFS, we allow
> > > > the user to make the decision as to which gadget endpoints to use.
> > > >
> > > > This patch adds another Raw Gadget ioctl USB_RAW_IOCTL_EPS_INFO that
> > > > exposes information about all non-control endpoints that a currently
> > > > connected UDC has. This information includes endpoints addresses, as well
> > > > as their capabilities and limits to allow the user to choose the most
> > > > fitting gadget endpoint.
> > > >
> > > > The USB_RAW_IOCTL_EP_ENABLE ioctl is updated to use the proper endpoint
> > > > validation routine usb_gadget_ep_match_desc() and also now accepts an
> > > > optional usb_ss_ep_comp_descriptor argument.
> > > >
> > > > These changes affect the portability of the gadgets that use Raw Gadget
> > > > when running on different UDCs. Nevertheless, as long as the user relies
> > > > on the information provided by USB_RAW_IOCTL_EPS_INFO to dynamically
> > > > choose endpoint addresses, UDC-agnostic gadgets can still be written with
> > > > Raw Gadget.
> > > >
> > > > Fixes: f2c2e717642c ("usb: gadget: add raw-gadget interface")
> > > > Signed-off-by: Andrey Konovalov <andreyknvl@xxxxxxxxxx>
> > > > ---
> > > >
> > > > Changes v1 -> v2:
> > > > - Validate endpoint number against dev->eps_num instead of
> > > > USB_RAW_EPS_NUM_MAX.
> > > > - Dropped maxburst from struct usb_raw_ep_limits, added reserved field
> > > > instead.
> > > > - Don't allocate struct usb_raw_eps_info on stack, it's too large.
> > > > - Assign SuperSpeed endpoint companion descriptor to usb_ep when enabling
> > > > endpoints.
> > > > - Fixed typos in commit message.
> > > >
> > > > ---
> > > > Documentation/usb/raw-gadget.rst | 6 +-
> > > > drivers/usb/gadget/legacy/raw_gadget.c | 217 +++++++++++++++++--------
> > > > include/uapi/linux/usb/raw_gadget.h | 88 +++++++++-
> > > > 3 files changed, 231 insertions(+), 80 deletions(-)
> > > >
> > > > diff --git a/Documentation/usb/raw-gadget.rst b/Documentation/usb/raw-gadget.rst
> > > > index 9e78cb858f86..42bd446d72b2 100644
> > > > --- a/Documentation/usb/raw-gadget.rst
> > > > +++ b/Documentation/usb/raw-gadget.rst
> > > > @@ -27,11 +27,7 @@ differences are:
> > > > 3. Raw Gadget provides a way to select a UDC device/driver to bind to,
> > > > while GadgetFS currently binds to the first available UDC.
> > > >
> > > > -4. Raw Gadget uses predictable endpoint names (handles) across different
> > > > - UDCs (as long as UDCs have enough endpoints of each required transfer
> > > > - type).
> > > > -
> > > > -5. Raw Gadget has ioctl-based interface instead of a filesystem-based one.
> > > > +4. Raw Gadget has ioctl-based interface instead of a filesystem-based one.
> > > >
> > > > Userspace interface
> > > > ~~~~~~~~~~~~~~~~~~~
> > > > diff --git a/drivers/usb/gadget/legacy/raw_gadget.c b/drivers/usb/gadget/legacy/raw_gadget.c
> > > > index 7b241992ad5a..e6abbc15341a 100644
> > > > --- a/drivers/usb/gadget/legacy/raw_gadget.c
> > > > +++ b/drivers/usb/gadget/legacy/raw_gadget.c
> > > > @@ -7,6 +7,7 @@
> > > > */
> > > >
> > > > #include <linux/compiler.h>
> > > > +#include <linux/ctype.h>
> > > > #include <linux/debugfs.h>
> > > > #include <linux/delay.h>
> > > > #include <linux/kref.h>
> > > > @@ -123,8 +124,6 @@ static void raw_event_queue_destroy(struct raw_event_queue *queue)
> > > >
> > > > struct raw_dev;
> > > >
> > > > -#define USB_RAW_MAX_ENDPOINTS 32
> > > > -
> > > > enum ep_state {
> > > > STATE_EP_DISABLED,
> > > > STATE_EP_ENABLED,
> > > > @@ -134,6 +133,7 @@ struct raw_ep {
> > > > struct raw_dev *dev;
> > > > enum ep_state state;
> > > > struct usb_ep *ep;
> > > > + u8 addr;
> > > > struct usb_request *req;
> > > > bool urb_queued;
> > > > bool disabling;
> > > > @@ -168,7 +168,8 @@ struct raw_dev {
> > > > bool ep0_out_pending;
> > > > bool ep0_urb_queued;
> > > > ssize_t ep0_status;
> > > > - struct raw_ep eps[USB_RAW_MAX_ENDPOINTS];
> > > > + struct raw_ep eps[USB_RAW_EPS_NUM_MAX];
> > > > + int eps_num;
> > > >
> > > > struct completion ep0_done;
> > > > struct raw_event_queue queue;
> > > > @@ -202,7 +203,7 @@ static void dev_free(struct kref *kref)
> > > > usb_ep_free_request(dev->gadget->ep0, dev->req);
> > > > }
> > > > raw_event_queue_destroy(&dev->queue);
> > > > - for (i = 0; i < USB_RAW_MAX_ENDPOINTS; i++) {
> > > > + for (i = 0; i < dev->eps_num; i++) {
> > > > if (dev->eps[i].state != STATE_EP_ENABLED)
> > > > continue;
> > > > usb_ep_disable(dev->eps[i].ep);
> > > > @@ -249,12 +250,26 @@ static void gadget_ep0_complete(struct usb_ep *ep, struct usb_request *req)
> > > > complete(&dev->ep0_done);
> > > > }
> > > >
> > > > +static u8 get_ep_addr(const char *name)
> > > > +{
> > > > + /* If the endpoint has fixed function (named as e.g. "ep12out-bulk"),
> > > > + * parse the endpoint address from its name. We deliberately use
> > > > + * deprecated simple_strtoul() function here, as the number isn't
> > > > + * followed by '\0' nor '\n'.
> > > > + */
> > > > + if (isdigit(name[2]))
> > > > + return simple_strtoul(&name[2], NULL, 10);
> > > > + /* Otherwise the endpoint is configurable (named as e.g. "ep-a"). */
> > > > + return USB_RAW_EP_ADDR_ANY;
> > > > +}
> > > > +
> > > > static int gadget_bind(struct usb_gadget *gadget,
> > > > struct usb_gadget_driver *driver)
> > > > {
> > > > - int ret = 0;
> > > > + int ret = 0, i = 0;
> > > > struct raw_dev *dev = container_of(driver, struct raw_dev, driver);
> > > > struct usb_request *req;
> > > > + struct usb_ep *ep;
> > > > unsigned long flags;
> > > >
> > > > if (strcmp(gadget->name, dev->udc_name) != 0)
> > > > @@ -273,6 +288,13 @@ static int gadget_bind(struct usb_gadget *gadget,
> > > > dev->req->context = dev;
> > > > dev->req->complete = gadget_ep0_complete;
> > > > dev->gadget = gadget;
> > > > + gadget_for_each_ep(ep, dev->gadget) {
> > > > + dev->eps[i].ep = ep;
> > > > + dev->eps[i].addr = get_ep_addr(ep->name);
> > > > + dev->eps[i].state = STATE_EP_DISABLED;
> > > > + i++;
> > > > + }
> > > > + dev->eps_num = i;
> > > > spin_unlock_irqrestore(&dev->lock, flags);
> > > >
> > > > /* Matches kref_put() in gadget_unbind(). */
> > > > @@ -555,7 +577,7 @@ static void *raw_alloc_io_data(struct usb_raw_ep_io *io, void __user *ptr,
> > > >
> > > > if (copy_from_user(io, ptr, sizeof(*io)))
> > > > return ERR_PTR(-EFAULT);
> > > > - if (io->ep >= USB_RAW_MAX_ENDPOINTS)
> > > > + if (io->ep >= USB_RAW_EPS_NUM_MAX)
> > > > return ERR_PTR(-EINVAL);
> > > > if (!usb_raw_io_flags_valid(io->flags))
> > > > return ERR_PTR(-EINVAL);
> > > > @@ -682,52 +704,34 @@ static int raw_ioctl_ep0_read(struct raw_dev *dev, unsigned long value)
> > > > return ret;
> > > > }
> > > >
> > > > -static bool check_ep_caps(struct usb_ep *ep,
> > > > - struct usb_endpoint_descriptor *desc)
> > > > -{
> > > > - switch (usb_endpoint_type(desc)) {
> > > > - case USB_ENDPOINT_XFER_ISOC:
> > > > - if (!ep->caps.type_iso)
> > > > - return false;
> > > > - break;
> > > > - case USB_ENDPOINT_XFER_BULK:
> > > > - if (!ep->caps.type_bulk)
> > > > - return false;
> > > > - break;
> > > > - case USB_ENDPOINT_XFER_INT:
> > > > - if (!ep->caps.type_int)
> > > > - return false;
> > > > - break;
> > > > - default:
> > > > - return false;
> > > > - }
> > > > -
> > > > - if (usb_endpoint_dir_in(desc) && !ep->caps.dir_in)
> > > > - return false;
> > > > - if (usb_endpoint_dir_out(desc) && !ep->caps.dir_out)
> > > > - return false;
> > > > -
> > > > - return true;
> > > > -}
> > > > -
> > > > static int raw_ioctl_ep_enable(struct raw_dev *dev, unsigned long value)
> > > > {
> > > > int ret = 0, i;
> > > > unsigned long flags;
> > > > - struct usb_endpoint_descriptor *desc;
> > > > - struct usb_ep *ep = NULL;
> > > > + struct usb_raw_ep_descs *descs;
> > > > + struct usb_endpoint_descriptor *ep_desc;
> > > > + struct usb_ss_ep_comp_descriptor *comp_desc = NULL;
> > > > + struct raw_ep *ep;
> > > >
> > > > - desc = memdup_user((void __user *)value, sizeof(*desc));
> > > > - if (IS_ERR(desc))
> > > > - return PTR_ERR(desc);
> > > > + descs = memdup_user((void __user *)value, sizeof(*descs));
> > > > + if (IS_ERR(descs))
> > > > + return PTR_ERR(descs);
> > > > +
> > > > + ep_desc = &descs->ep;
> > > > + /*
> > > > + * Assume that SuperSpeed endpoint companion descriptor is not present
> > > > + * if its length is 0.
> > > > + */
> > > > + if (descs->comp.bLength != 0)
> > > > + comp_desc = &descs->comp;
> > > >
> > > > /*
> > > > * Endpoints with a maxpacket length of 0 can cause crashes in UDC
> > > > * drivers.
> > > > */
> > > > - if (usb_endpoint_maxp(desc) == 0) {
> > > > + if (usb_endpoint_maxp(ep_desc) == 0) {
> > > > dev_dbg(dev->dev, "fail, bad endpoint maxpacket\n");
> > > > - kfree(desc);
> > > > + kfree(descs);
> > > > return -EINVAL;
> > > > }
> > > >
> > > > @@ -743,41 +747,34 @@ static int raw_ioctl_ep_enable(struct raw_dev *dev, unsigned long value)
> > > > goto out_free;
> > > > }
> > > >
> > > > - for (i = 0; i < USB_RAW_MAX_ENDPOINTS; i++) {
> > > > - if (dev->eps[i].state == STATE_EP_ENABLED)
> > > > + for (i = 0; i < dev->eps_num; i++) {
> > > > + ep = &dev->eps[i];
> > > > + if (ep->state != STATE_EP_DISABLED)
> > > > continue;
> > > > - break;
> > > > - }
> > > > - if (i == USB_RAW_MAX_ENDPOINTS) {
> > > > - dev_dbg(&dev->gadget->dev,
> > > > - "fail, no device endpoints available\n");
> > > > - ret = -EBUSY;
> > > > - goto out_free;
> > > > - }
> > > > -
> > > > - gadget_for_each_ep(ep, dev->gadget) {
> > > > - if (ep->enabled)
> > > > + if (ep->addr != usb_endpoint_num(ep_desc) &&
> > > > + ep->addr != USB_RAW_EP_ADDR_ANY)
> > > > continue;
> > > > - if (!check_ep_caps(ep, desc))
> > > > + if (!usb_gadget_ep_match_desc(dev->gadget, ep->ep,
> > > > + ep_desc, comp_desc))
> > > > continue;
> > > > - ep->desc = desc;
> > > > - ret = usb_ep_enable(ep);
> > > > + ep->ep->desc = ep_desc;
> > > > + ep->ep->comp_desc = comp_desc;
> > > > + ret = usb_ep_enable(ep->ep);
> > > > if (ret < 0) {
> > > > dev_err(&dev->gadget->dev,
> > > > "fail, usb_ep_enable returned %d\n", ret);
> > > > goto out_free;
> > > > }
> > > > - dev->eps[i].req = usb_ep_alloc_request(ep, GFP_ATOMIC);
> > > > - if (!dev->eps[i].req) {
> > > > + ep->req = usb_ep_alloc_request(ep->ep, GFP_ATOMIC);
> > > > + if (!ep->req) {
> > > > dev_err(&dev->gadget->dev,
> > > > "fail, usb_ep_alloc_request failed\n");
> > > > - usb_ep_disable(ep);
> > > > + usb_ep_disable(ep->ep);
> > > > ret = -ENOMEM;
> > > > goto out_free;
> > > > }
> > > > - dev->eps[i].ep = ep;
> > > > - dev->eps[i].state = STATE_EP_ENABLED;
> > > > - ep->driver_data = &dev->eps[i];
> > > > + ep->state = STATE_EP_ENABLED;
> > > > + ep->ep->driver_data = ep;
> > > > ret = i;
> > > > goto out_unlock;
> > > > }
> > > > @@ -786,7 +783,7 @@ static int raw_ioctl_ep_enable(struct raw_dev *dev, unsigned long value)
> > > > ret = -EBUSY;
> > > >
> > > > out_free:
> > > > - kfree(desc);
> > > > + kfree(descs);
> > > > out_unlock:
> > > > spin_unlock_irqrestore(&dev->lock, flags);
> > > > return ret;
> > > > @@ -796,10 +793,6 @@ static int raw_ioctl_ep_disable(struct raw_dev *dev, unsigned long value)
> > > > {
> > > > int ret = 0, i = value;
> > > > unsigned long flags;
> > > > - const void *desc;
> > > > -
> > > > - if (i < 0 || i >= USB_RAW_MAX_ENDPOINTS)
> > > > - return -EINVAL;
> > > >
> > > > spin_lock_irqsave(&dev->lock, flags);
> > > > if (dev->state != STATE_DEV_RUNNING) {
> > > > @@ -812,6 +805,11 @@ static int raw_ioctl_ep_disable(struct raw_dev *dev, unsigned long value)
> > > > ret = -EBUSY;
> > > > goto out_unlock;
> > > > }
> > > > + if (i < 0 || i >= dev->eps_num) {
> > > > + dev_dbg(dev->dev, "fail, invalid endpoint\n");
> > > > + ret = -EBUSY;
> > > > + goto out_unlock;
> > > > + }
> > > > if (dev->eps[i].state != STATE_EP_ENABLED) {
> > > > dev_dbg(&dev->gadget->dev, "fail, endpoint is not enabled\n");
> > > > ret = -EINVAL;
> > > > @@ -836,10 +834,13 @@ static int raw_ioctl_ep_disable(struct raw_dev *dev, unsigned long value)
> > > >
> > > > spin_lock_irqsave(&dev->lock, flags);
> > > > usb_ep_free_request(dev->eps[i].ep, dev->eps[i].req);
> > > > - desc = dev->eps[i].ep->desc;
> > > > + /*
> > > > + * This kfree() frees both endpoint and SuperSpeed
> > > > + * endpoint companion descriptors.
> > > > + */
> > > > + kfree(dev->eps[i].ep->desc);
> > > > dev->eps[i].ep = NULL;
> > > > dev->eps[i].state = STATE_EP_DISABLED;
> > > > - kfree(desc);
> > > > dev->eps[i].disabling = false;
> > > >
> > > > out_unlock:
> > > > @@ -868,7 +869,7 @@ static int raw_process_ep_io(struct raw_dev *dev, struct usb_raw_ep_io *io,
> > > > {
> > > > int ret = 0;
> > > > unsigned long flags;
> > > > - struct raw_ep *ep = &dev->eps[io->ep];
> > > > + struct raw_ep *ep;
> > > > DECLARE_COMPLETION_ONSTACK(done);
> > > >
> > > > spin_lock_irqsave(&dev->lock, flags);
> > > > @@ -882,6 +883,12 @@ static int raw_process_ep_io(struct raw_dev *dev, struct usb_raw_ep_io *io,
> > > > ret = -EBUSY;
> > > > goto out_unlock;
> > > > }
> > > > + if (io->ep >= dev->eps_num) {
> > > > + dev_dbg(&dev->gadget->dev, "fail, invalid endpoint\n");
> > > > + ret = -EINVAL;
> > > > + goto out_unlock;
> > > > + }
> > > > + ep = &dev->eps[io->ep];
> > > > if (ep->state != STATE_EP_ENABLED) {
> > > > dev_dbg(&dev->gadget->dev, "fail, endpoint is not enabled\n");
> > > > ret = -EBUSY;
> > > > @@ -1027,6 +1034,71 @@ static int raw_ioctl_vbus_draw(struct raw_dev *dev, unsigned long value)
> > > > return ret;
> > > > }
> > > >
> > > > +static void fill_ep_caps(struct usb_ep_caps *caps,
> > > > + struct usb_raw_ep_caps *raw_caps)
> > > > +{
> > > > + raw_caps->type_control = caps->type_control;
> > > > + raw_caps->type_iso = caps->type_iso;
> > > > + raw_caps->type_bulk = caps->type_bulk;
> > > > + raw_caps->type_int = caps->type_int;
> > > > + raw_caps->dir_in = caps->dir_in;
> > > > + raw_caps->dir_out = caps->dir_out;
> > > > +}
> > > > +
> > > > +static void fill_ep_limits(struct usb_ep *ep, struct usb_raw_ep_limits *limits)
> > > > +{
> > > > + limits->maxpacket_limit = ep->maxpacket_limit;
> > > > + limits->max_streams = ep->max_streams;
> > > > +}
> > > > +
> > > > +static int raw_ioctl_eps_info(struct raw_dev *dev, unsigned long value)
> > > > +{
> > > > + int ret = 0, i;
> > > > + unsigned long flags;
> > > > + struct usb_raw_eps_info *info;
> > > > + struct raw_ep *ep;
> > > > +
> > > > + info = kmalloc(sizeof(*info), GFP_KERNEL);
> > > > + if (!info) {
> > > > + ret = -ENOMEM;
> > > > + goto out;
> > > > + }
> > > > +
> > > > + spin_lock_irqsave(&dev->lock, flags);
> > > > + if (dev->state != STATE_DEV_RUNNING) {
> > > > + dev_dbg(dev->dev, "fail, device is not running\n");
> > > > + ret = -EINVAL;
> > > > + spin_unlock_irqrestore(&dev->lock, flags);
> > > > + goto out_free;
> > > > + }
> > > > + if (!dev->gadget) {
> > > > + dev_dbg(dev->dev, "fail, gadget is not bound\n");
> > > > + ret = -EBUSY;
> > > > + spin_unlock_irqrestore(&dev->lock, flags);
> > > > + goto out_free;
> > > > + }
> > > > +
> > > > + memset(info, 0, sizeof(*info));
> > > > + for (i = 0; i < dev->eps_num; i++) {
> > > > + ep = &dev->eps[i];
> > > > + strscpy(&info->eps[i].name[0], ep->ep->name,
> > > > + USB_RAW_EP_NAME_MAX);
> > > > + info->eps[i].addr = ep->addr;
> > > > + fill_ep_caps(&ep->ep->caps, &info->eps[i].caps);
> > > > + fill_ep_limits(ep->ep, &info->eps[i].limits);
> > > > + }
> > > > + ret = dev->eps_num;
> > > > + spin_unlock_irqrestore(&dev->lock, flags);
> > > > +
> > > > + if (copy_to_user((void __user *)value, info, sizeof(*info)))
> > > > + ret = -EFAULT;
> > > > +
> > > > +out_free:
> > > > + kfree(info);
> > > > +out:
> > > > + return ret;
> > > > +}
> > > > +
> > > > static long raw_ioctl(struct file *fd, unsigned int cmd, unsigned long value)
> > > > {
> > > > struct raw_dev *dev = fd->private_data;
> > > > @@ -1069,6 +1141,9 @@ static long raw_ioctl(struct file *fd, unsigned int cmd, unsigned long value)
> > > > case USB_RAW_IOCTL_VBUS_DRAW:
> > > > ret = raw_ioctl_vbus_draw(dev, value);
> > > > break;
> > > > + case USB_RAW_IOCTL_EPS_INFO:
> > > > + ret = raw_ioctl_eps_info(dev, value);
> > > > + break;
> > > > default:
> > > > ret = -EINVAL;
> > > > }
> > > > diff --git a/include/uapi/linux/usb/raw_gadget.h b/include/uapi/linux/usb/raw_gadget.h
> > > > index 8544802b25bd..722124fff290 100644
> > > > --- a/include/uapi/linux/usb/raw_gadget.h
> > > > +++ b/include/uapi/linux/usb/raw_gadget.h
> > > > @@ -93,6 +93,79 @@ struct usb_raw_ep_io {
> > > > __u8 data[0];
> > > > };
> > > >
> > > > +/*
> > > > + * struct usb_raw_ep_descs - argument for USB_RAW_IOCTL_EP_ENABLE ioctl.
> > > > + * @ep: Endpoint descriptor.
> > > > + * @comp: SuperSpeed Endpoint Companion descriptor.
> > > > + *
> > > > + * Both of these descriptors are only used by the gadget subsystem including
> > > > + * the UDC driver and don't affect the descriptors that are sent to the host.
> > > > + * However, the user must make sure that the host and the gadget sides agree
> > > > + * on the used endpoint parameters (such as e.g. endpoint addresses).
> > > > + */
> > > > +struct usb_raw_ep_descs {
> > > > + struct usb_endpoint_descriptor ep;
> > > > + struct usb_ss_ep_comp_descriptor comp;
> > > > +};
> > > > +
> > > > +/* Maximum number of non-control endpoints in struct usb_raw_eps_info. */
> > > > +#define USB_RAW_EPS_NUM_MAX 30
> > > > +
> > > > +/* Maximum length of UDC endpoint name in struct usb_raw_ep_info. */
> > > > +#define USB_RAW_EP_NAME_MAX 16
> > > > +
> > > > +/* Used as addr in struct usb_raw_ep_info if endpoint accepts any address. */
> > > > +#define USB_RAW_EP_ADDR_ANY 0xff
> > > > +
> > > > +/*
> > > > + * struct usb_raw_ep_caps - exposes endpoint capabilities from struct usb_ep
> > > > + * (technically from its member struct usb_ep_caps).
> > > > + */
> > > > +struct usb_raw_ep_caps {
> > > > + __u32 type_control : 1;
> > > > + __u32 type_iso : 1;
> > > > + __u32 type_bulk : 1;
> > > > + __u32 type_int : 1;
> > > > + __u32 dir_in : 1;
> > > > + __u32 dir_out : 1;
> > > > +};
> > > > +
> > > > +/*
> > > > + * struct usb_raw_ep_limits - exposes endpoint limits from struct usb_ep.
> > > > + * @maxpacket_limit: Maximum packet size value supported by this endpoint.
> > > > + * @max_streams: maximum number of streams supported by this endpoint
> > > > + * (actual number is 2^n).
> > > > + * @reserved: Empty, reserved for potential future extensions.
> > > > + */
> > > > +struct usb_raw_ep_limits {
> > > > + __u16 maxpacket_limit;
> > > > + __u16 max_streams;
> > > > + __u32 reserved;
> > > > +};
> > > > +
> > > > +/*
> > > > + * struct usb_raw_ep_info - stores information about a gadget endpoint.
> > > > + * @name: Name of the endpoint as it is defined in the UDC driver.
> > > > + * @addr: Address of the endpoint that must be specified in the endpoint
> > > > + * descriptor passed to USB_RAW_IOCTL_EP_ENABLE ioctl.
> > > > + * @caps: Endpoint capabilities.
> > > > + * @limits: Endpoint limits.
> > > > + */
> > > > +struct usb_raw_ep_info {
> > > > + __u8 name[USB_RAW_EP_NAME_MAX];
> > > > + __u32 addr;
> > > > + struct usb_raw_ep_caps caps;
> > > > + struct usb_raw_ep_limits limits;
> > > > +};
> > > > +
> > > > +/*
> > > > + * struct usb_raw_eps_info - argument for USB_RAW_IOCTL_EPS_INFO ioctl.
> > > > + * eps: Structures that store information about non-control endpoints.
> > > > + */
> > > > +struct usb_raw_eps_info {
> > > > + struct usb_raw_ep_info eps[USB_RAW_EPS_NUM_MAX];
> > > > +};
> > > > +
> > > > /*
> > > > * Initializes a Raw Gadget instance.
> > > > * Accepts a pointer to the usb_raw_init struct as an argument.
> > > > @@ -126,12 +199,12 @@ struct usb_raw_ep_io {
> > > > #define USB_RAW_IOCTL_EP0_READ _IOWR('U', 4, struct usb_raw_ep_io)
> > > >
> > > > /*
> > > > - * Finds an endpoint that supports the transfer type specified in the
> > > > - * descriptor and enables it.
> > > > - * Accepts a pointer to the usb_endpoint_descriptor struct as an argument.
> > > > + * Finds an endpoint that satisfies the parameters specified in the provided
> > > > + * descriptors (address, transfer type, etc.) and enables it.
> > > > + * Accepts a pointer to the usb_raw_ep_descs struct as an argument.
> > > > * Returns enabled endpoint handle on success or negative error code on failure.
> > > > */
> > > > -#define USB_RAW_IOCTL_EP_ENABLE _IOW('U', 5, struct usb_endpoint_descriptor)
> > > > +#define USB_RAW_IOCTL_EP_ENABLE _IOW('U', 5, struct usb_raw_ep_descs)
> > > >
> > > > /* Disables specified endpoint.
> > > > * Accepts endpoint handle as an argument.
> > > > @@ -164,4 +237,11 @@ struct usb_raw_ep_io {
> > > > */
> > > > #define USB_RAW_IOCTL_VBUS_DRAW _IOW('U', 10, __u32)
> > > >
> > > > +/* Fills in the usb_raw_eps_info structure with information about non-control
> > > > + * endpoints available for the currently connected UDC.
> > > > + * Returns the number of available endpoints on success or negative error code
> > > > + * on failure.
> > > > + */
> > > > +#define USB_RAW_IOCTL_EPS_INFO _IOR('U', 11, struct usb_raw_eps_info)
> > > > +
> > >
> > > here you're changing userspace ABI. Aren't we going to possibly break
> > > some existing applications?
> >
> > Hi Felipe,
> >
> > I've been working on tests for Raw Gadget for the last few weeks [1],
> > which revealed a few problems with the interface. This isn't yet
> > included into any released kernel, so my hope that changing the ABI is
> > OK during the rc stage.
>
> Let me know what you would prefer here though. It might make sense to
> keep the current ioctl for USB2-only devices and add another one for
> USB3 in the future. I'm not sure what's the best design decision.
I'll split this patch into two, one fixes endpoint selection, the
other one changes the ABI. The first one definitely needs to get into
the mainline before the release, for the second one I'd like to hear
your opinion.
I will also resend all raw-gadget fixes as a series to avoid confusion.
> I also have another patch (which I haven't sent yet) that changes the
> ABI a bit to support USB3 streams. But same, I don't know if it's
> better to change the ABI right now or to expand it by adding another
> ioctl in the future.
