v6 - Remove "contains:" from compatible section of brcm,bcm7445-ehci.yaml as requested by Rob Herring. v5 - Use devm_platform_get_and_ioremap_resource() in ehci-brcm.c as requested by Andy Shevchenko. - Add pm_runtime_set_active() to ehci_resume() in ehci-brcm.c as requested by Alan Stern. v4 - A few more fixes to the brcm,bcm7445-ehci.yaml dt-bindings document requested by Rob Herring. - Fixed ordering issue in MAINTAINERS as requested by Andy Shevchenko. v3 - Addressed all of Andy Shevchenko's review comments for ehci-brcm.c. - Fixed the brcm,bcm7445-ehci.yaml dt-bindings document, dt_binding_check now passes. - Added the XHCI functionality to xhci-plat.c instead of creating new brcmstb files, as suggested by Mathias Nyman. v2 - Addressed Andy Shevchenko's review comments. - Fixed dt_binding_check error pointed out by Rob Herring. - Removed pr_info message in ehci_brcm_init as suggested by Greg Kroah-Hartman. Al Cooper (4): dt-bindings: Add Broadcom STB USB support usb: xhci: xhci-plat: Add support for Broadcom STB SoC's usb: ehci: Add new EHCI driver for Broadcom STB SoC's usb: host: Add ability to build new Broadcom STB USB drivers .../bindings/usb/brcm,bcm7445-ehci.yaml | 59 ++++ .../devicetree/bindings/usb/usb-xhci.txt | 1 + MAINTAINERS | 8 + drivers/usb/host/Kconfig | 16 + drivers/usb/host/Makefile | 16 +- drivers/usb/host/ehci-brcm.c | 290 ++++++++++++++++++ drivers/usb/host/xhci-plat.c | 10 + 7 files changed, 394 insertions(+), 6 deletions(-) create mode 100644 Documentation/devicetree/bindings/usb/brcm,bcm7445-ehci.yaml create mode 100644 drivers/usb/host/ehci-brcm.c -- 2.17.1