Linux Serial

• Thread Index

• [PATCH 2/4] serial: 8250_uniphier: drop !defined(MODULE) conditional
  • From: Masahiro Yamada
• [PATCH 1/4] earlycon: mark earlycon code as __used iif the caller is built-in
  • From: Masahiro Yamada
• [PATCH] serial: 8250_uniphier: add COMPILE_TEST option
  • From: Masahiro Yamada
• Re: [PATCH 3/3] tty: serial: msm: Cleanup include usage
  • From: Andy Gross
• Re: [PATCH 2/3] tty: serial: msm: Only configure MND registers on hw that has it
  • From: Andy Gross
• Re: [PATCH 1/3] tty: serial: msm: Move header file into driver
  • From: Andy Gross
• Re: [PATCH] tty: serial: msm: Don't read off end of tx fifo
  • From: Andy Gross
• Re: [PATCH] tty: serial: msm: Don't read off end of tx fifo
  • From: Stephen Boyd
• Re: [PATCH v2] tty:serial:msm:Do not restore Rx interrupts in DMA
  • From: Greg KH
• [PATCH] serial: earlycon: stop abusing console::index
  • From: Mark Rutland
• Re: [PATCH v3 11/11] serial: sh-sci: Add DT support for dedicated RTS/CTS
  • From: Sergei Shtylyov
• [PATCH v2] tty:serial:msm:Do not restore Rx interrupts in DMA
  • From: Charanya Venkatraman
• [PATCH v3 03/11] serial: sh-sci: Always set TIOCM_CTS in .get_mctrl() callback
  • From: Geert Uytterhoeven
• [PATCH v3 07/11] serial: sh-sci: Add more Serial Port Control/Data Register documentation
  • From: Geert Uytterhoeven
• [PATCH v3 09/11] serial: sh-sci: Add pin initialization for SCIFA/SCIFB
  • From: Geert Uytterhoeven
• [PATCH v3 11/11] serial: sh-sci: Add DT support for dedicated RTS/CTS
  • From: Geert Uytterhoeven
• [PATCH v3 10/11] serial: sh-sci: Fix support for hardware-assisted RTS/CTS
  • From: Geert Uytterhoeven
• [PATCH v3 04/11] serial: sh-sci: Add support for GPIO-controlled modem lines
  • From: Geert Uytterhoeven
• [PATCH v3 00/11] serial: sh-sci: Hardware Flow Control Updates
  • From: Geert Uytterhoeven
• [PATCH v3 02/11] serial: sh-sci: Update DT binding documentation for dedicated RTS/CTS
  • From: Geert Uytterhoeven
• [PATCH v3 01/11] serial: sh-sci: Update DT binding documentation for GPIO modem lines
  • From: Geert Uytterhoeven
• [PATCH v3 08/11] serial: sh-sci: Correct pin initialization on (H)SCIF
  • From: Geert Uytterhoeven
• [PATCH v3 05/11] serial: sh-sci: Do not open-code sci_getreg()
  • From: Geert Uytterhoeven
• [PATCH v3 06/11] serial: sh-sci: Add more Serial Port Register documentation
  • From: Geert Uytterhoeven
• Re: [PATCH] tty: serial: msm: Don't read off end of tx fifo
  • From: Frank Rowand
• [PATCH] tty: serial: msm: Don't read off end of tx fifo
  • From: Bjorn Andersson
• Re: [PATCH] tty: serial: msm: Disable restoring Rx interrupts for DMA Mode
  • From: Stephen Boyd
• Re: [PATCH v8 4/4] serial: pl011: add console matching function
  • From: Aleksey Makarov
• Re: [PATCH] tty/serial: atmel: fix RS485 half duplex with DMA
  • From: Nicolas Ferre
• Re: [PATCH] tty: serial: msm: Disable restoring Rx interrupts for DMA Mode
  • From: charanya
• Re: [PATCH v2 1/2] serial: samsung: Fix ERR pointer dereference on deferred probe
  • From: Kevin Hilman
• Re: [PATCH v2 1/2] serial: samsung: Fix ERR pointer dereference on deferred probe
  • From: Javier Martinez Canillas
• Re: [PATCH] serial: Make SERIAL_MPS2_UART depend on ARCH_MPS2
  • From: Vladimir Murzin
• Re: [PATCH] tty: pci EXAR GPIO pins setup as INPUT
  • From: Grunewald, Soeren
• Re: tmpfs kernel panic in final /dev/tty close
  • From: Greg Kroah-Hartmann
• Re: [RFT PATCH 1/2] serial: Fix console setup section mismatch
  • From: Krzysztof Kozlowski
• Re: [RFT PATCH 1/2] serial: Fix console setup section mismatch
  • From: Russell King - ARM Linux
• [RFT PATCH 2/2] serial: pnx8xxx: Fix coding style
  • From: Krzysztof Kozlowski
• [RFT PATCH 1/2] serial: Fix console setup section mismatch
  • From: Krzysztof Kozlowski
• [PATCH v2 1/2] serial: samsung: Fix ERR pointer dereference on deferred probe
  • From: Krzysztof Kozlowski
• [PATCH v2 2/2] serial: samsung: Fix possible out of bounds access on non-DT platform
  • From: Krzysztof Kozlowski
• RE: [PATCH] serial_core: fix ownership on allocated tty_driver
  • From: Stam, Michel [FINT]
• [PATCH] serial: samsung: Fix ERR pointer dereference on deferred probe
  • From: Krzysztof Kozlowski
• [PATCH v5 4/4] tty/serial/8250: use mctrl_gpio helpers
  • From: yegorslists
• [PATCH v5 3/4] serial: mctrl_gpio: enable API usage only for initialized mctrl_gpios struct
  • From: yegorslists
• [PATCH v5 0/4] tty/serial/8250: add MCTRL_GPIO support
  • From: yegorslists
• [PATCH v5 2/4] serial: mctrl_gpio: add modem control read routine
  • From: yegorslists
• [PATCH v5 1/4] tty/serial/8250: make UART_MCR register access consistent
  • From: yegorslists
• Re: [PATCH v4 2/4] serial: mctrl_gpio: add modem control read routine
  • From: Yegor Yefremov
• Re: tmpfs kernel panic in final /dev/tty close
  • From: Francesco Ruggeri
• Re: tmpfs kernel panic in final /dev/tty close
  • From: Herton R. Krzesinski
• Re: [PATCH] serial_core: fix ownership on allocated tty_driver
  • From: Peter Hurley
• RE: [PATCH] serial_core: fix ownership on allocated tty_driver
  • From: Stam, Michel [FINT]
• [PATCH stable] serial: samsung: Reorder the sequence of clock control when call s3c24xx_serial_set_termios()
  • From: Krzysztof Kozlowski
• tmpfs kernel panic in final /dev/tty close
  • From: Francesco Ruggeri
• [PATCH] tty/serial: atmel: fix RS485 half duplex with DMA
  • From: Alexandre Belloni
• Re: [PATCH v8 0/4] ACPI: parse the SPCR table
  • From: Aleksey Makarov
• [PATCHv2] tty: xuartps: disable clocks when not used
  • From: Shubhrajyoti Datta
• [PATCH] serial: 8250_fintek: fix the mismatched IRQ mode
  • From: Ji-Ze Hong (Peter Hong)
• [PATCH 3/4] serial: sh-sci: Clear RX, error, and break flags during reset
  • From: Geert Uytterhoeven
• [PATCH 1/4] serial: sh-sci: Do not start transfers from sci_startup()
  • From: Geert Uytterhoeven
• [PATCH 0/4] serial: sh-sci: FIFO initialization fixes
  • From: Geert Uytterhoeven
• [PATCH 2/4] serial: sh-sci: Stop transfers in sci_shutdown()
  • From: Geert Uytterhoeven
• [PATCH 4/4] serial: sh-sci: Clear (H)SCIF timeout and overrun during reset
  • From: Geert Uytterhoeven
• Re: [PATCH v5 00/11] serial: 8250: split LPSS to 8250_lpss, enable DMA on Quark
  • From: Bryan O'Donoghue
• Re: [PATCH v5 00/11] serial: 8250: split LPSS to 8250_lpss, enable DMA on Quark
  • From: Bryan O'Donoghue
• Re: [PATCH] tty: serial: msm: Remove duplicate handling of clocks
  • From: Stephen Boyd
• Re: [PATCH] tty: serial: msm: Disable restoring Rx interrupts for DMA Mode
  • From: Stephen Boyd
• Re: [PATCH] sh-sci: SysRq support on EARLYCON
  • From: Geert Uytterhoeven
• Re: [PATCH] tty: pci EXAR GPIO pins setup as INPUT
  • From: Grunewald, Soeren
• Re: [PATCH v5 00/11] serial: 8250: split LPSS to 8250_lpss, enable DMA on Quark
  • From: Andy Shevchenko
• Re: [PATCH v5 00/11] serial: 8250: split LPSS to 8250_lpss, enable DMA on Quark
  • From: Andy Shevchenko
• Re: [PATCH v4 3/4] serial: mctrl_gpio: enable API usage only for initialized mctrl_gpios struct
  • From: Uwe Kleine-König
• Re: [PATCH v4 3/4] serial: mctrl_gpio: enable API usage only for initialized mctrl_gpios struct
  • From: Peter Hurley
• Re: [PATCH 4.7-rc1 1/1] 8250_pci: Adds support for the WCH CH355 4S card (corrected)
  • From: Alexandr Petrenko
• Re: [PATCH v4 3/4] serial: mctrl_gpio: enable API usage only for initialized mctrl_gpios struct
  • From: Uwe Kleine-König
• Re: [PATCH] added acces i/o products quad and octal serial cards
  • From: Greg KH
• [PATCH] added acces i/o products quad and octal serial cards
  • From: Jimi Damon
• Re: [PATCH v4 2/4] serial: mctrl_gpio: add modem control read routine
  • From: Peter Hurley
• Re: [PATCH v4 3/4] serial: mctrl_gpio: enable API usage only for initialized mctrl_gpios struct
  • From: Peter Hurley
• Re: [PATCH v4 2/4] serial: mctrl_gpio: add modem control read routine
  • From: Uwe Kleine-König
• Re: [PATCH v4 3/4] serial: mctrl_gpio: enable API usage only for initialized mctrl_gpios struct
  • From: Peter Hurley
• Re: [PATCH v4 2/4] serial: mctrl_gpio: add modem control read routine
  • From: Peter Hurley
• [PATCH 1/1] serial: core: align struct back to 4 bytes boundary
  • From: Andy Shevchenko
• Re: [PATCH v4 3/4] serial: mctrl_gpio: enable API usage only for initialized mctrl_gpios struct
  • From: Uwe Kleine-König
• Re: [PATCH v4 3/4] serial: mctrl_gpio: enable API usage only for initialized mctrl_gpios struct
  • From: Yegor Yefremov
• Re: [PATCH v4 3/4] serial: mctrl_gpio: enable API usage only for initialized mctrl_gpios struct
  • From: Uwe Kleine-König
• Re: [PATCH v4 2/4] serial: mctrl_gpio: add modem control read routine
  • From: Uwe Kleine-König
• [PATCH v4 4/4] tty/serial/8250: use mctrl_gpio helpers
  • From: yegorslists
• [PATCH v4 1/4] tty/serial/8250: make UART_MCR register access consistent
  • From: yegorslists
• [PATCH v4 3/4] serial: mctrl_gpio: enable API usage only for initialized mctrl_gpios struct
  • From: yegorslists
• [PATCH v4 2/4] serial: mctrl_gpio: add modem control read routine
  • From: yegorslists
• [PATCH v4 0/4] tty/serial/8250: add MCTRL_GPIO support
  • From: yegorslists
• [PATCH] 8250_pci: Adds support for the WCH CH355 4S card
  • From: Alexandr Petrenko
• [PATCH 48/54] MAINTAINERS: Add file patterns for serial device tree bindings
  • From: Geert Uytterhoeven
• [GIT PULL] TTY/Serial Update for 4.7-rc1
  • From: Greg KH
• Re: polling a UART vs. interrupt
  • From: Greg KH
• polling a UART vs. interrupt
  • From: Andy Falanga (afalanga)
• Re: [PATCH v8 2/4] ACPI: parse SPCR and enable matching console
  • From: Rafael J. Wysocki
• [PATCH v8 0/4] ACPI: parse the SPCR table
  • From: Aleksey Makarov
• [PATCH v8 3/4] ARM64: ACPI: enable ACPI_SPCR_TABLE
  • From: Aleksey Makarov
• [PATCH v8 4/4] serial: pl011: add console matching function
  • From: Aleksey Makarov
• [PATCH v8 2/4] ACPI: parse SPCR and enable matching console
  • From: Aleksey Makarov
• [PATCH v8 1/4] of/serial: move earlycon early_param handling to serial
  • From: Aleksey Makarov
• RE: [PATCH v2] serial: serial_core: Perform NULL checks for release/request_port ops
  • From: Fugang Duan
• RE: [PATCH] serial: imx: Avoid NULL pointer dereference in bind/unbind uart device
  • From: Fugang Duan
• [PATCH v2] serial: serial_core: Perform NULL checks for release/request_port ops
  • From: Fabio Estevam
• RE: [PATCH] serial: serial_core: Only call release_port() if it is not NULL
  • From: Fugang Duan
• [PATCH] serial: serial_core: Only call release_port() if it is not NULL
  • From: Fabio Estevam
• Re: [PATCH] serial: imx: Avoid NULL pointer dereference in bind/unbind uart device
  • From: Greg KH
• [PATCH] serial: imx: Avoid NULL pointer dereference in bind/unbind uart device
  • From: Andy Duan
• Re: [PATCH] serial: 8250_early: Add earlycon support for Synopsys DesignWare ABP UART
  • From: Jon Mason
• [PATCH] serial_core: fix ownership on allocated tty_driver
  • From: Michel Stam
• Re: [PATCH] serial: 8250_early: Add earlycon support for Synopsys DesignWare ABP UART
  • From: Kefeng Wang
• Re: [PATCH v5 00/11] serial: 8250: split LPSS to 8250_lpss, enable DMA on Quark
  • From: Bryan O'Donoghue
• Re: [PATCH 4.7-rc1 1/1] 8250_pci: Adds support for the WCH CH355 4S card (corrected)
  • From: Greg KH
• [PATCH 4.7-rc1 1/1] 8250_pci: Adds support for the WCH CH355 4S card (corrected)
  • From: Alexandr Petrenko
• Re: [PATCH 4.7-rc1 1/1] 8250_pci: Adds support for the WCH CH355 4S card (corrected)
  • From: Greg KH
• [PATCH 4.7-rc1 1/1] 8250_pci: Adds support for the WCH CH355 4S card (corrected)
  • From: Alexandr Petrenko
• Re: [PATCH 4.7-rc1 1/1] 8250_pci: Adds support for the WCH CH355 4S card
  • From: Greg KH
• Re: [PATCH 4.7-rc1 1/1] 8250_pci: Adds support for the WCH CH355 4S card
  • From: Greg KH
• Using last device file to access 8250 uart causes transfer issues
  • From: Mikkel Kirkgaard Nielsen
• [PATCH 4.7-rc1 1/1] 8250_pci: Adds support for the WCH CH355 4S card
  • From: Александр Петренко
• Re: [PATCH 1/1] tty/serial: to support 8250 earlycon can be enabled independently
  • From: Alan
• Re: [PATCH 1/1] tty/serial: to support 8250 earlycon can be enabled independently
  • From: Leizhen (ThunderTown)
• [PATCH 05/11] serial: pic32_uart: Fix double free of 'sport->irq_fault_name'.
  • From: Purna Chandra Mandal
• Re: [PATCH 1/1] tty/serial: to support 8250 earlycon can be enabled independently
  • From: Peter Hurley
• [PATCH 1/1] tty/serial: to support 8250 earlycon can be enabled independently
  • From: Zhen Lei
• Re: [PATCH] tty: serial: msm: Remove duplicate handling of clocks
  • From: Pramod Gurav
• Re: [PATCH v2] serial: amba-pl011: complete support to ZTE uart
  • From: Jun Nie
• Re: [PATCH 0/2] serial: doc: More Low Level Serial API Documentation Improvements
  • From: Jonathan Corbet
• [PATCH] tty: xuartps: disable clocks when not used
  • From: Shubhrajyoti Datta
• Re: [PATCH] tty: serial: msm: Disable restoring Rx interrupts for DMA Mode
  • From: charanya
• Re: [PATCH] serial: Make SERIAL_MPS2_UART depend on ARCH_MPS2
  • From: Geert Uytterhoeven
• Re: [PATCH] serial: Make SERIAL_MPS2_UART depend on ARCH_MPS2
  • From: Vladimir Murzin
• [PATCH] tty: pci EXAR GPIO pins setup as INPUT
  • From: Dieter Hilfer
• Re: [PATCH 3/3] tty/serial: atmel: add comment for the ring buffer size macro
  • From: Nicolas Ferre
• Re: [PATCH v5 00/11] serial: 8250: split LPSS to 8250_lpss, enable DMA on Quark
  • From: Vinod Koul
• [PATCH 3/3] tty/serial: atmel: add comment for the ring buffer size macro
  • From: Ludovic Desroches
• [PATCH 2/3] tty/serial: atmel: split tx and rx paths
  • From: Ludovic Desroches
• [PATCH 1/3] tty/serial: atmel: re-integrate status check in irq handler
  • From: Ludovic Desroches
• Re: [PATCH v5 00/11] serial: 8250: split LPSS to 8250_lpss, enable DMA on Quark
  • From: Andy Shevchenko
• Re: [PATCH v7 0/5] ACPI: parse the SPCR table
  • From: Kefeng Wang
• [PATCH] serial: sccnxp: Add barrier between two sequential read/write cycles
  • From: Alexander Shiyan
• Re: [PATCH v7 0/5] ACPI: parse the SPCR table
  • From: Aleksey Makarov
• Re: [PATCH v7 0/5] ACPI: parse the SPCR table
  • From: Jon Masters
• Re: [PATCH] serial: sh-sci: Document SoC specific bindings for r8a7796
  • From: Geert Uytterhoeven
• [PATCH] serial: sh-sci: Document SoC specific bindings for r8a7796
  • From: Simon Horman
• Re: [PATCH v2 1/1] dmaengine: slave means at least one of DMA_SLAVE, DMA_CYCLIC
  • From: Vinod Koul
• Re: [PATCH] tty: serial: msm: Disable restoring Rx interrupts for DMA Mode
  • From: Andy Gross
• Re: [PATCH] tty: serial: msm: Remove duplicate handling of clocks
  • From: Pramod Gurav
• Re: [PATCH] tty: serial: msm: Disable restoring Rx interrupts for DMA Mode
  • From: Stephen Boyd
• [PATCH 0/3] msm_serial cleanups
  • From: Stephen Boyd
• [PATCH 1/3] tty: serial: msm: Move header file into driver
  • From: Stephen Boyd
• [PATCH 2/3] tty: serial: msm: Only configure MND registers on hw that has it
  • From: Stephen Boyd
• [PATCH 3/3] tty: serial: msm: Cleanup include usage
  • From: Stephen Boyd
• Re: [PATCH] tty: serial: msm: Remove duplicate handling of clocks
  • From: Stephen Boyd
• [PATCH 1/2] serial: doc: Always refer to tty_port->mutex
  • From: Geert Uytterhoeven
• [PATCH 2/2] serial: doc: Use port->state instead of info
  • From: Geert Uytterhoeven
• [PATCH 0/2] serial: doc: More Low Level Serial API Documentation Improvements
  • From: Geert Uytterhoeven
• [patch V4 27/31] serial: use parity32 in max3100
  • From: zengzhaoxiu
• [PATCH] tty: serial: msm: Remove duplicate handling of clocks
  • From: Pramod Gurav
• [PATCH] serial: 8250_early: Add earlycon support for Synopsys DesignWare ABP UART
  • From: Kefeng Wang
• [PATCH] serial: Make SERIAL_MPS2_UART depend on ARCH_MPS2
  • From: Geert Uytterhoeven
• Re: [PATCH 2/7] net: ircomm, cleanup TIOCGSERIAL
  • From: David Miller
• [PATCH v2 1/1] dmaengine: slave means at least one of DMA_SLAVE, DMA_CYCLIC
  • From: Andy Shevchenko
• [PATCH] tty: serial: msm: Disable restoring Rx interrupts for DMA Mode
  • From: Abhishek Sahu
• Re: [PATCH v1 1/2] dmaengine: slave means at least one of DMA_SLAVE, DMA_CYCLIC
  • From: Vinod Koul
• Re: [PATCH v1 2/2] dmaengine: rename cmd_pause to cmd_suspend
  • From: Vinod Koul
• Re: [PATCH v1 1/2] dmaengine: slave means at least one of DMA_SLAVE, DMA_CYCLIC
  • From: Andy Shevchenko
• Re: [PATCH v1 2/2] dmaengine: rename cmd_pause to cmd_suspend
  • From: Andy Shevchenko
• Re: [PATCH v1 2/2] dmaengine: rename cmd_pause to cmd_suspend
  • From: Vinod Koul
• Re: [PATCH v1 1/2] dmaengine: slave means at least one of DMA_SLAVE, DMA_CYCLIC
  • From: Vinod Koul
• Re: startup/request_port functions not being called
  • From: Andy Falanga (afalanga)
• Re: [PATCH 1/7] tty: ipwireless, cleanup TIOCGSERIAL
  • From: David Sterba
• [PATCH v2] TTY: serial, handle platform_get_irq retval properly
  • From: Jiri Slaby
• [PATCH 4/7] tty: frv, remove unused serial macros
  • From: Jiri Slaby
• [PATCH 3/7] tty: cyclades+mxser, do not initialize to zero
  • From: Jiri Slaby
• [PATCH 1/7] tty: ipwireless, cleanup TIOCGSERIAL
  • From: Jiri Slaby
• [PATCH 2/7] net: ircomm, cleanup TIOCGSERIAL
  • From: Jiri Slaby
• [PATCH 5/7] tty: stop defining STD_COM_FLAGS in drivers
  • From: Jiri Slaby
• [PATCH 6/7] tty: 8250, drop unused members from struct old_serial_port
  • From: Jiri Slaby
• [PATCH 7/7] tty: 8250, kill DEBUG_INTR
  • From: Jiri Slaby
• Re: [PATCH -repost] kgdb: depends on VT
  • From: Jiri Slaby
• Re: [PATCH v3 03/11] dmaengine: dw: set polarity of handshake interface
  • From: Andy Shevchenko
• Re: [PATCH v3 03/11] dmaengine: dw: set polarity of handshake interface
  • From: Maarten Brock
• [PATCH v5 02/11] dmaengine: dw: provide probe(), remove() stubs for users
  • From: Andy Shevchenko
• [PATCH v5 03/11] dmaengine: dw: set polarity of handshake interface
  • From: Andy Shevchenko
• [PATCH v5 01/11] dmaengine: dw: keep copy of custom slave config in dwc
  • From: Andy Shevchenko
• [PATCH v5 04/11] dmaengine: dw: override LLP support if asked in platform data
  • From: Andy Shevchenko
• [PATCH v5 09/11] serial: 8250_lpss: move Quark code from PCI driver
  • From: Andy Shevchenko
• [PATCH v5 06/11] serial: 8250_dma: adjust DMA address of the UART
  • From: Andy Shevchenko
• [PATCH v5 05/11] serial: 8250_dma: switch to new dmaengine_terminate_* API
  • From: Andy Shevchenko
• [PATCH v5 07/11] serial: 8250: enable AFE on ports where FIFO is 16 bytes
  • From: Andy Shevchenko
• [PATCH v5 11/11] serial: 8250_lpss: enable DMA on Intel Quark UART
  • From: Andy Shevchenko
• [PATCH v5 10/11] serial: 8250_lpss: enable MSI for Intel Quark
  • From: Andy Shevchenko
• [PATCH v5 08/11] serial: 8250_lpss: split LPSS driver to separate module
  • From: Andy Shevchenko
• [PATCH v5 00/11] serial: 8250: split LPSS to 8250_lpss, enable DMA on Quark
  • From: Andy Shevchenko
• Re: [PATCH 0/3] Support MPS2 UART controller
  • From: Vladimir Murzin
• Re: [PATCH 0/3] Support MPS2 UART controller
  • From: Paul Gortmaker
• Re: [PATCH v1 0/2] dmaengine: urgent fix to prevent regression in UART
  • From: Andy Shevchenko
• Re: [PATCH v3 03/11] dmaengine: dw: set polarity of handshake interface
  • From: Andy Shevchenko
• Re: [PATCH v3 03/11] dmaengine: dw: set polarity of handshake interface
  • From: Maarten Brock
• Re: [PATCH v3 03/11] dmaengine: dw: set polarity of handshake interface
  • From: Bryan O'Donoghue
• Re: [PATCH v3 03/11] dmaengine: dw: set polarity of handshake interface
  • From: Andy Shevchenko
• Re: [PATCH v3 09/11] serial: 8250_lpss: move Quark code from PCI driver
  • From: Andy Shevchenko
• [PATCH] serial_core: Change UART PM state to OFF on failure
  • From: Pramod Gurav
• Re: [PATCH 1/2] tty: serial: msm_serial regression fix data corruption
  • From: Andy Gross
• Re: startup/request_port functions not being called
  • From: Greg KH
• startup/request_port functions not being called
  • From: Andy Falanga (afalanga)
• Re: [PATCH v3 03/11] dmaengine: dw: set polarity of handshake interface
  • From: Bryan O'Donoghue
• Re: [PATCH v3 09/11] serial: 8250_lpss: move Quark code from PCI driver
  • From: Bryan O'Donoghue
• Re: [BUG] drivers/tty: read() on a noncanonical blocking tty randomly fails when VMIN > received >= buf
  • From: Peter Hurley
• Re: [BUG] drivers/tty: read() on a noncanonical blocking tty randomly fails when VMIN > received >= buf
  • From: Julio Guerra
• [PATCH v1 0/2] dmaengine: urgent fix to prevent regression in UART
  • From: Andy Shevchenko
• [PATCH v1 2/2] dmaengine: rename cmd_pause to cmd_suspend
  • From: Andy Shevchenko
• [PATCH v1 1/2] dmaengine: slave means at least one of DMA_SLAVE, DMA_CYCLIC
  • From: Andy Shevchenko
• Re: [PATCH v3 09/11] serial: 8250_lpss: move Quark code from PCI driver
  • From: Andy Shevchenko
• Re: [PATCH v4 09/11] serial: 8250_lpss: move Quark code from PCI driver
  • From: Andy Shevchenko
• Re: [PATCH v4 09/11] serial: 8250_lpss: move Quark code from PCI driver
  • From: Bryan O'Donoghue
• Re: [PATCH v4 08/11] serial: 8250_lpss: split LPSS driver to separate module
  • From: kbuild test robot
• Re: [PATCH v3 09/11] serial: 8250_lpss: move Quark code from PCI driver
  • From: Andy Shevchenko
• Re: [PATCH v3 09/11] serial: 8250_lpss: move Quark code from PCI driver
  • From: Bryan O'Donoghue
• [PATCH v4 04/11] dmaengine: dw: override LLP support if asked in platform data
  • From: Andy Shevchenko
• [PATCH v4 10/11] serial: 8250_lpss: enable MSI for Intel Quark
  • From: Andy Shevchenko
• Re: [PATCH v3 09/11] serial: 8250_lpss: move Quark code from PCI driver
  • From: Bryan O'Donoghue
• [PATCH v4 08/11] serial: 8250_lpss: split LPSS driver to separate module
  • From: Andy Shevchenko
• [PATCH v4 07/11] serial: 8250: enable AFE on ports where FIFO is 16 bytes
  • From: Andy Shevchenko
• [PATCH v4 09/11] serial: 8250_lpss: move Quark code from PCI driver
  • From: Andy Shevchenko
• [PATCH v4 06/11] serial: 8250_dma: adjust DMA address of the UART
  • From: Andy Shevchenko
• [PATCH v4 03/11] dmaengine: dw: set polarity of handshake interface
  • From: Andy Shevchenko
• [PATCH v4 02/11] dmaengine: dw: provide probe(), remove() stubs for users
  • From: Andy Shevchenko
• [PATCH v4 01/11] dmaengine: dw: keep copy of custom slave config in dwc
  • From: Andy Shevchenko
• [PATCH v4 05/11] serial: 8250_dma: switch to new dmaengine_terminate_* API
  • From: Andy Shevchenko
• [PATCH v4 11/11] serial: 8250_lpss: enable DMA on Intel Quark UART
  • From: Andy Shevchenko
• [PATCH v4 00/11] serial: 8250: split LPSS to 8250_lpss, enable DMA on Quark
  • From: Andy Shevchenko
• Re: [PATCH v3 09/11] serial: 8250_lpss: move Quark code from PCI driver
  • From: Heikki Krogerus
• Re: [PATCH v3 09/11] serial: 8250_lpss: move Quark code from PCI driver
  • From: Andy Shevchenko
• Re: [PATCH v3 09/11] serial: 8250_lpss: move Quark code from PCI driver
  • From: Bryan O'Donoghue
• Re: [PATCH v3 09/11] serial: 8250_lpss: move Quark code from PCI driver
  • From: Andy Shevchenko
• Re: [PATCH v3 09/11] serial: 8250_lpss: move Quark code from PCI driver
  • From: Bryan O'Donoghue
• Re: [PATCH v3 00/11] serial: 8250: split LPSS to 8250_lpss, enable DMA on Quark
  • From: Andy Shevchenko
• Re: [PATCH v3 09/11] serial: 8250_lpss: move Quark code from PCI driver
  • From: Andy Shevchenko
• Re: [PATCH v3 09/11] serial: 8250_lpss: move Quark code from PCI driver
  • From: Bryan O'Donoghue
• re: serial: core: Prevent unsafe uart port access, part 3
  • From: Dan Carpenter
• Re: [PATCH v3 00/11] serial: 8250: split LPSS to 8250_lpss, enable DMA on Quark
  • From: Greg Kroah-Hartman
• Re: Bunch of serial warnings in next at least with omap-serial
  • From: Tony Lindgren
• Re: [PATCH] serial: imx: dump registers via debugfs
  • From: Greg KH
• [PATCH] serial: imx: dump registers via debugfs
  • From: Andreas Fenkart
• Re: Bunch of serial warnings in next at least with omap-serial
  • From: Peter Hurley
• Re: [PATCH v2 02/11] serial: sh-sci: Update DT binding documentation for dedicated RTS/CTS
  • From: Rob Herring
• [PATCH 1/2] tty: vt, return error when con_startup fails
  • From: Jiri Slaby
• [PATCH 2/2] tty: vt, finish looping on duplicate
  • From: Jiri Slaby
• Re: [PATCH] tty: serial: 8250_omap: do not defer termios changes
  • From: Vignesh R
• Re: [PATCH stable] serial: samsung: Reorder the sequence of clock control when call s3c24xx_serial_set_termios()
  • From: Krzysztof Kozlowski
• RE: Raspberry compute module does not find ttySC0 and ttySC1 with SC16IS752
  • From: Maarten Brock
• RE: Raspberry compute module does not find ttySC0 and ttySC1 with SC16IS752
  • From: Juan García Pastor
• Re: [PATCH stable] serial: samsung: Reorder the sequence of clock control when call s3c24xx_serial_set_termios()
  • From: Greg Kroah-Hartman
• [PATCH stable] serial: samsung: Reorder the sequence of clock control when call s3c24xx_serial_set_termios()
  • From: Krzysztof Kozlowski
• Re: [PATCH v3] serial: samsung: Reorder the sequence of clock control when call s3c24xx_serial_set_termios()
  • From: Krzysztof Kozlowski
• [PATCH v5] serial: 8250_dw: fix wrong logic in dw8250_check_lcr()
  • From: Kefeng Wang
• RE: Raspberry compute module does not find ttySC0 and ttySC1 with SC16IS752
  • From: Maarten Brock
• RE: Raspberry compute module does not find ttySC0 and ttySC1 with SC16IS752
  • From: Juan García Pastor
• Re: DTR/DSR flow control
  • From: Grigori Goronzy
• Re: DTR/DSR flow control
  • From: Greg KH
• DTR/DSR flow control
  • From: Grigori Goronzy
• Re: linux-4.6-rc5/drivers/tty/serial/8250/8250_port.c:1818]: (style) Redundant condition
  • From: gregkh@xxxxxxxxxxxxxxxxxxx
• Encrypted serial console
  • From: Matwey V. Kornilov
• Re: [PATCH v2 08/11] serial: sh-sci: Correct pin initialization on (H)SCIF
  • From: Geert Uytterhoeven
• Re: [PATCH] 8250: Hypervisors always export working 16550A UARTs.
  • From: Don Dutile
• Re: [PATCH] 8250: Hypervisors always export working 16550A UARTs.
  • From: Greg KH
• RE: Raspberry compute module does not find ttySC0 and ttySC1 with SC16IS752
  • From: Maarten Brock
• Re: [PATCH] 8250: Hypervisors always export working 16550A UARTs.
  • From: Richard W.M. Jones
• Re: [PATCH v2 08/11] serial: sh-sci: Correct pin initialization on (H)SCIF
  • From: Peter Hurley
• Re: [PATCH] 8250: Hypervisors always export working 16550A UARTs.
  • From: Greg KH
• Re: [PATCH v2 07/11] serial: sh-sci: Add more Serial Port Control/Data Register documentation
  • From: Peter Hurley
• Re: [PATCH v2 06/11] serial: sh-sci: Add more Serial Port Register documentation
  • From: Peter Hurley
• Re: [PATCH v2 04/11] serial: sh-sci: Add support for GPIO-controlled modem lines
  • From: Peter Hurley
• Re: [PATCH v2 05/11] serial: sh-sci: Do not open-code sci_getreg()
  • From: Peter Hurley
• Re: [PATCH v2 03/11] serial: sh-sci: Always set TIOCM_CTS in .get_mctrl() callback
  • From: Peter Hurley
• Re: [PATCH] 8250: Hypervisors always export working 16550A UARTs.
  • From: Richard W.M. Jones
• Re: [PATCH] 8250: Hypervisors always export working 16550A UARTs.
  • From: Greg KH
• Re: [PATCH] 8250: Hypervisors always export working 16550A UARTs.
  • From: Greg KH
• RE: Raspberry compute module does not find ttySC0 and ttySC1 with SC16IS752
  • From: Juan García Pastor
• Re: [PATCH v2] serial: mctrl_gpio: Drop support for out1-gpios and out2-gpios
  • From: Yegor Yefremov
• Re: [PATCH v2] serial: mctrl_gpio: Drop support for out1-gpios and out2-gpios
  • From: Richard Genoud
• [PATCH v2 00/11] serial: sh-sci: Hardware Flow Control Updates
  • From: Geert Uytterhoeven
• [PATCH v2 04/11] serial: sh-sci: Add support for GPIO-controlled modem lines
  • From: Geert Uytterhoeven
• [PATCH v2 06/11] serial: sh-sci: Add more Serial Port Register documentation
  • From: Geert Uytterhoeven
• [PATCH v2 07/11] serial: sh-sci: Add more Serial Port Control/Data Register documentation
  • From: Geert Uytterhoeven
• [PATCH v2 09/11] serial: sh-sci: Add pin initialization for SCIFA/SCIFB
  • From: Geert Uytterhoeven
• [PATCH v2 11/11] serial: sh-sci: Add DT support for dedicated RTS/CTS
  • From: Geert Uytterhoeven
• [PATCH v2 01/11] serial: sh-sci: Update DT binding documentation for GPIO modem lines
  • From: Geert Uytterhoeven
• [PATCH v2 03/11] serial: sh-sci: Always set TIOCM_CTS in .get_mctrl() callback
  • From: Geert Uytterhoeven
• [PATCH v2 05/11] serial: sh-sci: Do not open-code sci_getreg()
  • From: Geert Uytterhoeven
• [PATCH v2 10/11] serial: sh-sci: Fix support for hardware-assisted RTS/CTS
  • From: Geert Uytterhoeven
• [PATCH v2 08/11] serial: sh-sci: Correct pin initialization on (H)SCIF
  • From: Geert Uytterhoeven
• [PATCH v2 02/11] serial: sh-sci: Update DT binding documentation for dedicated RTS/CTS
  • From: Geert Uytterhoeven
• [PATCH v2] serial: mctrl_gpio: Drop support for out1-gpios and out2-gpios
  • From: Geert Uytterhoeven
• Re: [PATCH 6/8] tty: Replace ASYNC_INITIALIZED bit and update atomically
  • From: Johan Hovold
• Re: [PATCH] tty: Replace TTY_THROTTLED bit tests with tty_throttled()
  • From: Johan Hovold
• Re: Raspberry compute module does not find ttySC0 and ttySC1 with SC16IS752
  • From: Maarten Brock
• Re: [PATCH] tty: serial, return values platform_get_irq, part II.
  • From: Jiri Slaby
• [PATCH] tty: serial, return values platform_get_irq, part II.
  • From: Jiri Slaby
• Re: [PATCH v3] serial: mctrl_gpio: add IRQ locking
  • From: Yegor Yefremov
• [PATCH v4] serial: mctrl_gpio: add IRQ locking
  • From: yegorslists
• Re: [PATCH v3] serial: mctrl_gpio: add IRQ locking
  • From: Uwe Kleine-König
• [PATCH v3] serial: mctrl_gpio: add IRQ locking
  • From: yegorslists
• Re: [PATCH] 8250: Hypervisors always export working 16550A UARTs.
  • From: Richard W.M. Jones
• Re: [PATCH] 8250: Hypervisors always export working 16550A UARTs.
  • From: Richard W.M. Jones
• Re: [PATCH] 8250: Hypervisors always export working 16550A UARTs.
  • From: Matwey V. Kornilov
• Re: [PATCH v4] serial: 8250_dw: fix wrong logic in dw8250_check_lcr()
  • From: Greg Kroah-Hartman
• Re: [PATCH v7 5/5] serial: pl011: add console matching function
  • From: Greg Kroah-Hartman
• Re: [PATCH v7 1/5] of/serial: move earlycon early_param handling to serial
  • From: Greg Kroah-Hartman
• Re: [PATCH] 8250: Hypervisors always export working 16550A UARTs.
  • From: Peter Hurley
• Re: [PATCH] 8250: Hypervisors always export working 16550A UARTs.
  • From: Greg KH
• [PATCH] 8250: Hypervisors always export working 16550A UARTs.
  • From: Richard W.M. Jones
• [PATCH] 8250: Hypervisors always export working 16550A UARTs.
  • From: Richard W.M. Jones
• Re: [PATCH 2/2] tty: serial: msm_serial add info message
  • From: Frank Rowand
• Re: [PATCH V3 27/29] serial: use parity32 in max3100
  • From: Greg Kroah-Hartman
• Re: Raspberry compute module does not find ttySC0 and ttySC1 with SC16IS752
  • From: Greg KH
• Re: [PATCH 2/2] tty: serial: msm_serial add info message
  • From: Greg Kroah-Hartman
• Re: [PATCH 0/8] Replace kernel-defined ASYNC_ bits
  • From: Grant Edwards
• Re: [PATCH 0/8] Replace kernel-defined ASYNC_ bits
  • From: Greg Kroah-Hartman
• Re: [PATCH v2] serial: amba-pl011: complete support to ZTE uart
  • From: Greg KH
• Re: [PATCH v3 00/11] serial: 8250: split LPSS to 8250_lpss, enable DMA on Quark
  • From: Bryan O'Donoghue
• [PATCH] serial: tegra: Remove unused variable
  • From: Thierry Reding
• [PATCH] serial: 8250: of: Make tegra_serial_handle_break() static
  • From: Thierry Reding
• Re: [PATCH] serial: mctrl_gpio: Drop support for out1-gpios and out2-gpios
  • From: Geert Uytterhoeven
• Re: [PATCH v2] serial: 8250: Integrate Fintek into 8250_base
  • From: Peter Hurley
• [PATCH v3 01/11] dmaengine: dw: keep copy of custom slave config in dwc
  • From: Andy Shevchenko
• [PATCH v3 06/11] serial: 8250_dma: adjust DMA address of the UART
  • From: Andy Shevchenko
• [PATCH v3 03/11] dmaengine: dw: set polarity of handshake interface
  • From: Andy Shevchenko
• [PATCH v3 10/11] serial: 8250_lpss: enable MSI for Intel Quark
  • From: Andy Shevchenko
• [PATCH v3 02/11] dmaengine: dw: provide probe(), remove() stubs for users
  • From: Andy Shevchenko
• [PATCH v3 11/11] serial: 8250_lpss: enable DMA on Intel Quark UART
  • From: Andy Shevchenko
• [PATCH v3 08/11] serial: 8250_lpss: split LPSS driver to separate module
  • From: Andy Shevchenko
• [PATCH v3 00/11] serial: 8250: split LPSS to 8250_lpss, enable DMA on Quark
  • From: Andy Shevchenko
• [PATCH v3 04/11] dmaengine: dw: override LLP support if asked in platform data
  • From: Andy Shevchenko
• [PATCH v3 09/11] serial: 8250_lpss: move Quark code from PCI driver
  • From: Andy Shevchenko
• [PATCH v3 05/11] serial: 8250_dma: switch to new dmaengine_terminate_* API
  • From: Andy Shevchenko
• [PATCH v3 07/11] serial: 8250: enable AFE on ports where FIFO is 16 bytes
  • From: Andy Shevchenko
• Re: [PATCH v2 4/5] serial: mctrl_gpio: add IRQ locking
  • From: Uwe Kleine-König
• [PATCH v3] serial: 8250_pci: fix divide error bug if baud rate is 0
  • From: David Müller
• [PATCH v2] serial: 8250: Integrate Fintek into 8250_base
  • From: Ricardo Ribalda Delgado
• Re: [PATCH v2] serial: 8250_pci: fix divide error bug if baud rate is 0
  • From: Andy Shevchenko
• Re: [PATCH] serial: mctrl_gpio: Drop support for out1-gpios and out2-gpios
  • From: Richard Genoud
• Re: [PATCH v2] serial: 8250_pci: fix divide error bug if baud rate is 0
  • From: David Müller (ELSOFT AG)
• Re: [PATCH v2 3/5] serial: mctrl_gpio: add modem control read routine
  • From: Peter Hurley
• Re: [PATCH] serial: 8250: Integrate Fintek into 8250_base
  • From: Peter Hurley
• Re: [PATCH v2 2/5] tty/serial/8250: make UART_MCR register access consistent
  • From: Peter Hurley
• Re: MicroGate synclink/synclink_gt driver issue
  • From: Peter Hurley
• Re: MicroGate synclink/synclink_gt driver issue
  • From: Paul Fulghum
• Re: MicroGate synclink/synclink_gt driver issue
  • From: Greg KH
• Re: MicroGate synclink/synclink_gt driver issue
  • From: Peter Hurley
• MicroGate synclink/synclink_gt driver issue
  • From: Mark Hounschell
• Re: [PATCH v2] serial: 8250_pci: fix divide error bug if baud rate is 0
  • From: Andy Shevchenko
• [PATCH v2] serial: 8250_pci: fix divide error bug if baud rate is 0
  • From: David Müller
• Re: [PATCH] serial: 8250_pci: fix divide error bug if baud rate is 0
  • From: Andy Shevchenko
• Re: [PATCH 2/2] tty: serial: msm_serial add info message
  • From: Frank Rowand
• Re: [PATCH 1/2] tty: serial: msm_serial regression fix data corruption
  • From: Bjorn Andersson
• Re: linux-4.6-rc5/drivers/tty/serial/8250/8250_port.c:1818]: (style) Redundant condition
  • From: Peter Hurley
• Re: [PATCH 2/2] tty: serial: msm_serial add info message
  • From: Stephen Boyd
• Re: [PATCH 2/2] tty: serial: msm_serial add info message
  • From: Frank Rowand
• Re: [PATCH 2/2] tty: serial: msm_serial add info message
  • From: Stephen Boyd
• Re: [PATCH 1/2] tty: serial: msm_serial regression fix data corruption
  • From: Stephen Boyd
• Re: linux-4.6-rc5/drivers/tty/serial/8250/8250_port.c:1818]: (style) Redundant condition
  • From: gregkh@xxxxxxxxxxxxxxxxxxx
• Re: linux-4.6-rc5/drivers/tty/serial/8250/8250_port.c:1818]: (style) Redundant condition
  • From: gregkh@xxxxxxxxxxxxxxxxxxx
• Re: linux-4.6-rc5/drivers/tty/serial/8250/8250_port.c:1818]: (style) Redundant condition
  • From: gregkh@xxxxxxxxxxxxxxxxxxx
• [PATCH] serial: 8250_pci: fix divide error bug if baud rate is 0
  • From: David Müller
• Re: [PATCH v2 5/5] serial: sirf: Use generic uart-has-rtscts DT property
  • From: Rob Herring
• Re: [PATCH v2 3/5] serial: mxs-auart: Use generic uart-has-rtscts DT property
  • From: Rob Herring
• Re: [PATCH v2 2/5] serial: imx: Use generic uart-has-rtscts DT property
  • From: Rob Herring
• Re: sh-sci regression without scif_clk in 4.6-rc5
  • From: Geert Uytterhoeven
• sh-sci regression without scif_clk in 4.6-rc5
  • From: Jürg Billeter
• Re: [PATCH v2 0/5] serial: 8250_mid: various fixes
  • From: Andy Shevchenko
• Re: [PATCH v5 00/10] Support for Cortex-M Prototyping System
  • From: Vladimir Murzin
• [PATCH 1/3] dt-bindings: document the MPS2 UART bindings
  • From: Vladimir Murzin
• [PATCH 3/3] serial: mps2-uart: add support for early console
  • From: Vladimir Murzin
• [PATCH 2/3] serial: mps2-uart: add MPS2 UART driver
  • From: Vladimir Murzin
• [PATCH 0/3] Support MPS2 UART controller
  • From: Vladimir Murzin
• Re: [PATCH v2] serial: amba-pl011: complete support to ZTE uart
  • From: Jun Nie
• Raspberry compute module does not find ttySC0 and ttySC1 with SC16IS752
  • From: Juan García Pastor
• Re: [PATCH v5 00/10] Support for Cortex-M Prototyping System
  • From: Arnd Bergmann
• Re: regression: 3a878c430fd6 ("tty: serial: msm: Add TX DMA support") drops data
  • From: Frank Rowand
• [PATCH 2/2] tty: serial: msm_serial add info message
  • From: Frank Rowand
• [PATCH 1/2] tty: serial: msm_serial regression fix data corruption
  • From: Frank Rowand
• [PATCH 0/2] tty: serial: msm_serial regression and add info message
  • From: Frank Rowand
• [GIT PULL] TTY/Serial fixes for 4.6-rc5
  • From: Greg KH
• Re: [PATCH] serial: mctrl_gpio: Drop support for out1-gpios and out2-gpios
  • From: Peter Hurley
• Re: [PATCH v2 1/5] doc: DT: Add Generic Serial Device Tree Bindings
  • From: Arnd Bergmann
• [PATCH v2, RESEND] serial-uartlite: Constify uartlite_be/uartlite_le
  • From: Maarten Brock
• [PATCH] serial: Move Marvell UART DT bindings to correct location
  • From: Geert Uytterhoeven
• [PATCH v2 1/5] doc: DT: Add Generic Serial Device Tree Bindings
  • From: Geert Uytterhoeven
• [PATCH v2 2/5] serial: imx: Use generic uart-has-rtscts DT property
  • From: Geert Uytterhoeven
• [PATCH v2 0/5] serial: Add Generic Serial Device Tree Bindings
  • From: Geert Uytterhoeven
• [PATCH v2 3/5] serial: mxs-auart: Use generic uart-has-rtscts DT property
  • From: Geert Uytterhoeven
• [PATCH v2 4/5] serial: sirf: Introduce helper variable struct device_node *np
  • From: Geert Uytterhoeven
• [PATCH v2 5/5] serial: sirf: Use generic uart-has-rtscts DT property
  • From: Geert Uytterhoeven
• [PATCH] serial: mctrl_gpio: Drop support for out1-gpios and out2-gpios
  • From: Geert Uytterhoeven
• Re: regression: 3a878c430fd6 ("tty: serial: msm: Add TX DMA support") drops data
  • From: Andy Shevchenko
• [PATCH v3] serial: samsung: Reorder the sequence of clock control when call s3c24xx_serial_set_termios()
  • From: Chanwoo Choi
• [PATCH] serial: 8250_uniphier: add "\n" at the end of error log
  • From: Masahiro Yamada
• Re: [PATCH v2, RESEND] serial-uartlite: Constify uartlite_be/uartlite_le
  • From: Greg KH
• Re: Serial driver in-band control message
  • From: Greg KH
• Re: regression: 3a878c430fd6 ("tty: serial: msm: Add TX DMA support") drops data
  • From: Frank Rowand
• Re: regression: 3a878c430fd6 ("tty: serial: msm: Add TX DMA support") drops data
  • From: Frank Rowand
• Re: [PATCH v2 00/11] serial: 8250: split LPSS to 8250_lpss, enable DMA on Quark
  • From: Andy Shevchenko
• Re: [PATCH v2 00/11] serial: 8250: split LPSS to 8250_lpss, enable DMA on Quark
  • From: Vinod Koul
• Serial driver in-band control message
  • From: Ramon Fried
• Re: [PATCH v2, RESEND] serial-uartlite: Constify uartlite_be/uartlite_le
  • From: Maarten Brock
• Re: regression: 3a878c430fd6 ("tty: serial: msm: Add TX DMA support") drops data
  • From: Ivan Ivanov
• Re: [PATCH v2] tty: msm_serial: remove static clk rate setting in probe
  • From: gpramod
• regression: 3a878c430fd6 ("tty: serial: msm: Add TX DMA support") drops data
  • From: Frank Rowand
• Re: [PATCH v2, RESEND] serial-uartlite: Constify uartlite_be/uartlite_le
  • From: Greg KH
• Re: Serial methods in speakup
  • From: Samuel Thibault
• Re: Serial methods in speakup
  • From: Peter Hurley
• Re: Serial methods in speakup
  • From: Samuel Thibault
• Re: Serial methods in speakup
  • From: Peter Hurley
• Re: Serial methods in speakup
  • From: Samuel Thibault
• Re: Serial methods in speakup
  • From: Peter Hurley
• Re: Serial methods in speakup
  • From: Samuel Thibault
• Re: Serial methods in speakup
  • From: Peter Hurley
• Re: Serial methods in speakup
  • From: Samuel Thibault
• Re: Serial methods in speakup
  • From: Samuel Thibault
• Re: Serial methods in speakup
  • From: Peter Hurley
• Re: 4.6-rc3 hung at tty_port_block_til_ready+0x11c/0x2a0
  • From: Peter Hurley
• Re: Serial methods in speakup
  • From: Samuel Thibault
• Re: Serial methods in speakup
  • From: Peter Hurley
• [PATCH v2, RESEND] serial-uartlite: Constify uartlite_be/uartlite_le
  • From: Maarten Brock
• Re: 4.6-rc3 hung at tty_port_block_til_ready+0x11c/0x2a0
  • From: Matwey V. Kornilov
• Re: [PATCH] serial-uartlite: un-constify uartlite_be/uartlite_le
  • From: Greg Kroah-Hartman
• Re: [PATCH v4] serial: 8250_dw: fix wrong logic in dw8250_check_lcr()
  • From: Kefeng Wang
• Re: [PATCH] serial-uartlite: un-constify uartlite_be/uartlite_le
  • From: Maarten Brock
• Re: [PATCH v2] serial: 8250_ingenic: Remove global variable
  • From: Greg Kroah-Hartman
• Re: Problem with 4.6-rc2
  • From: Greg KH
• Re: [PATCH, RESEND] serial-uartlite: un-constify uartlite_be/uartlite_le
  • From: Greg Kroah-Hartman
• Re: [PATCH] serial-uartlite: un-constify uartlite_be/uartlite_le
  • From: Greg Kroah-Hartman
• Re: 4.6-rc3 hung at tty_port_block_til_ready+0x11c/0x2a0
  • From: Peter Hurley
• Re: [PATCH v2] tty: msm_serial: remove static clk rate setting in probe
  • From: Andy Gross
• Re: [PATCH] tty: serial: msm: Support more bauds
  • From: Andy Gross
• Re: Problem with 4.6-rc2
  • From: Mason
• Re: Problem with 4.6-rc2
  • From: Jean Delvare
• Re: Problem with 4.6-rc2
  • From: Mason
• Re: Problem with 4.6-rc2
  • From: Mason
• Re: Problem with 4.6-rc2
  • From: Peter Hurley
• Re: [PATCH 1/5] doc: DT: Add Generic Serial Device Tree Bindings
  • From: Peter Hurley
• Problem with 4.6-rc2
  • From: Mason
• Re: [PATCH 1/5] doc: DT: Add Generic Serial Device Tree Bindings
  • From: Richard Genoud
• Re: 4.6-rc3 hung at tty_port_block_til_ready+0x11c/0x2a0
  • From: Matwey V. Kornilov
• Re: [PATCH 1/5] doc: DT: Add Generic Serial Device Tree Bindings
  • From: Arnd Bergmann
• Re: [PATCH 1/5] doc: DT: Add Generic Serial Device Tree Bindings
  • From: Geert Uytterhoeven
• Re: [PATCH 4/4] serial: doc: .break_ctl() may sleep
  • From: Geert Uytterhoeven
• Re: 4.6-rc3 hung at tty_port_block_til_ready+0x11c/0x2a0
  • From: Jiri Slaby
• Re: [PATCH, RESEND] serial-uartlite: un-constify uartlite_be/uartlite_le
  • From: Sudip Mukherjee
• Re: Found a bug in samsung serial tty code
  • From: Woody Wu
• Re: [PATCH, RESEND] serial-uartlite: un-constify uartlite_be/uartlite_le
  • From: Greg Kroah-Hartman
• [PATCH, RESEND] serial-uartlite: un-constify uartlite_be/uartlite_le
  • From: Arnd Bergmann
• Re: [PATCH 4/4] serial: doc: .break_ctl() may sleep
  • From: Jonathan Corbet
• Re: [PATCH 1/5] doc: DT: Add Generic Serial Device Tree Bindings
  • From: Arnd Bergmann
• Re: [PATCH v5 10/14] serial: pic32_uart: Add PIC32 UART driver
  • From: Greg Kroah-Hartman
• Re: Serial methods in speakup
  • From: Samuel Thibault
• Re: [PATCH 4/4] serial: doc: .break_ctl() may sleep
  • From: Peter Hurley
• Re: [PATCH 4/4] serial: doc: .break_ctl() may sleep
  • From: Jonathan Corbet
• Re: [PATCH 4/4] serial: doc: .break_ctl() may sleep
  • From: Peter Hurley
• Re: [PATCH 4/4] serial: doc: .break_ctl() may sleep
  • From: Jonathan Corbet
• Re: [PATCH v5 10/14] serial: pic32_uart: Add PIC32 UART driver
  • From: Sudeep Holla
• Re: [PATCH v5 00/10] Support for Cortex-M Prototyping System
  • From: Greg KH
• Re: [PATCH] tty/serial: atmel: fix hardware handshake selection
  • From: Nicolas Ferre
• Re: [PATCH v5 00/10] Support for Cortex-M Prototyping System
  • From: Vladimir Murzin
• Re: [PATCH v5 00/10] Support for Cortex-M Prototyping System
  • From: Sudeep Holla
• Re: [PATCH v5 00/10] Support for Cortex-M Prototyping System
  • From: Greg KH
• Re: 8250 dma issues ( was Re: [PATCH] tty: serial: 8250_omap: do not defer termios changes)
  • From: Peter Hurley
• Re: [PATCH 2/5] serial: imx: Use generic uart-has-rtscts DT property
  • From: Geert Uytterhoeven
• Re: [PATCH 2/5] serial: imx: Use generic uart-has-rtscts DT property
  • From: Rob Herring
• Re: [PATCH 1/5] doc: DT: Add Generic Serial Device Tree Bindings
  • From: Rob Herring
• Re: [PATCH] tty: serial: 8250_omap: do not defer termios changes
  • From: Peter Hurley
• Re: 8250 dma issues ( was Re: [PATCH] tty: serial: 8250_omap: do not defer termios changes)
  • From: One Thousand Gnomes
• [PATCH 3/5] serial: mxs-auart: Use generic uart-has-rtscts DT property
  • From: Geert Uytterhoeven
• [PATCH 2/5] serial: imx: Use generic uart-has-rtscts DT property
  • From: Geert Uytterhoeven
• [PATCH 4/5] serial: sirf: Introduce helper variable struct device_node *np
  • From: Geert Uytterhoeven
• [PATCH 5/5] serial: sirf: Use generic uart-has-rtscts DT property
  • From: Geert Uytterhoeven
• [PATCH 0/5] serial: Add Generic Serial Device Tree Bindings
  • From: Geert Uytterhoeven
• [PATCH 1/5] doc: DT: Add Generic Serial Device Tree Bindings
  • From: Geert Uytterhoeven
• [PATCH trivial] serial: mctrl_gpio: Grammar s/lines GPIOs/line GPIOs/, /sets/set/
  • From: Geert Uytterhoeven
• Re: [PATCH v5 00/10] Support for Cortex-M Prototyping System
  • From: Daniel Lezcano
• [PATCH 2/4] serial: doc: .(un)throttle() depends on hardware assisted flow control
  • From: Geert Uytterhoeven
• [PATCH 4/4] serial: doc: .break_ctl() may sleep
  • From: Geert Uytterhoeven
• [PATCH 1/4] serial: doc: Re-add paragraph documenting uart_console_write()
  • From: Geert Uytterhoeven
• [PATCH 0/4] serial: doc: Low Level Serial API Documentation Improvements (take two)
  • From: Geert Uytterhoeven
• [PATCH 3/4] serial: doc: .(un)throttle() are serialized by the tty layer
  • From: Geert Uytterhoeven
• Re: [PATCH v5 00/10] Support for Cortex-M Prototyping System
  • From: Vladimir Murzin
• [PATCH V3 00/29] bitops: add parity functions
  • From: zengzhaoxiu
• [PATCH V3 27/29] serial: use parity32 in max3100
  • From: zengzhaoxiu
• Re: omap uart + dma issues (Re: [PATCH] tty: serial: 8250_omap: do not defer termios changes)
  • From: Peter Hurley
• Re: [PATCH v1 12/12] serial: 8250_lpss: enable DMA on Intel Quark UART
  • From: Bryan O'Donoghue
• Re: [PATCH v1 12/12] serial: 8250_lpss: enable DMA on Intel Quark UART
  • From: Andy Shevchenko
• Re: [PATCH v1 12/12] serial: 8250_lpss: enable DMA on Intel Quark UART
  • From: Bryan O'Donoghue
• Re: [PATCH v1 12/12] serial: 8250_lpss: enable DMA on Intel Quark UART
  • From: Andy Shevchenko
• Re: [PATCH v1 12/12] serial: 8250_lpss: enable DMA on Intel Quark UART
  • From: Bryan O'Donoghue
• Re: [PATCH v2 0/6] serial: imx: handshaking fixes and improvments
  • From: Uwe Kleine-König
• Re: omap uart + dma issues (Re: [PATCH] tty: serial: 8250_omap: do not defer termios changes)
  • From: Sekhar Nori
• Re: [PATCH v2 0/6] serial: imx: handshaking fixes and improvments
  • From: Petr Štetiar
• Re: [PATCH 0/6] serial: 8250: dma fixes
  • From: Peter Hurley
• Re: [PATCH 2/6] serial: 8250: Validate dmaengine tx chan meets requirements
  • From: Peter Hurley
• omap uart + dma issues (Re: [PATCH] tty: serial: 8250_omap: do not defer termios changes)
  • From: Peter Hurley
• 8250 dma issues ( was Re: [PATCH] tty: serial: 8250_omap: do not defer termios changes)
  • From: Peter Hurley
• Re: [PATCH] tty: serial: 8250_omap: do not defer termios changes
  • From: Peter Hurley
• Re: [PATCH 5/6] serial: 8250: Extract IIR logic steering from rx dma
  • From: Peter Hurley
• Re: [PATCH v2 0/6] serial: imx: handshaking fixes and improvments
  • From: Uwe Kleine-König
• Re: [PATCH 5/6] serial: 8250: Extract IIR logic steering from rx dma
  • From: Sebastian Andrzej Siewior
• Re: [PATCH] tty: serial: 8250_omap: do not defer termios changes
  • From: Sebastian Andrzej Siewior
• Re: [PATCH v1 12/12] serial: 8250_lpss: enable DMA on Intel Quark UART
  • From: Andy Shevchenko
• Re: [PATCH v1 12/12] serial: 8250_lpss: enable DMA on Intel Quark UART
  • From: Bryan O'Donoghue
• Re: [PATCH 5/6] serial: 8250: Extract IIR logic steering from rx dma
  • From: Peter Hurley
• Re: [PATCH 0/6] serial: 8250: dma fixes
  • From: Sebastian Andrzej Siewior
• Re: [PATCH 2/6] serial: 8250: Validate dmaengine tx chan meets requirements
  • From: Sebastian Andrzej Siewior
• Re: [PATCH 5/6] serial: 8250: Extract IIR logic steering from rx dma
  • From: Sebastian Andrzej Siewior
• Re: [PATCH v2] serial: amba-pl011: complete support to ZTE uart
  • From: Jun Nie
• [PATCH] tty/serial: atmel: fix hardware handshake selection
  • From: Alexandre Belloni
• Re: [PATCH v2 0/6] serial: imx: handshaking fixes and improvments
  • From: Petr Štetiar
• Re: [PATCH v2 0/6] serial: imx: handshaking fixes and improvments
  • From: Uwe Kleine-König
• Re: [PATCH v2 0/6] serial: imx: handshaking fixes and improvments
  • From: Petr Štetiar
• Re: [PATCH v2 0/6] serial: imx: handshaking fixes and improvments
  • From: Uwe Kleine-König
• Re: [PATCH 0/6] serial: 8250: dma fixes
  • From: Heikki Krogerus
• Re: [PATCH v2 06/11] serial: 8250_dma: adjust DMA address of the UART
  • From: Heikki Krogerus
• Re: [PATCH v2 05/11] serial: 8250_dma: switch to new dmaengine_terminate_* API
  • From: Heikki Krogerus
• Re: [PATCH] tty: serial: 8250_omap: do not defer termios changes
  • From: Peter Hurley
• Re: [PATCH] tty: serial: 8250_omap: do not defer termios changes
  • From: Sebastian Andrzej Siewior
• Re: [PATCH] tty: serial: 8250_omap: do not defer termios changes
  • From: Peter Hurley
• Re: [PATCH v2 0/6] serial: imx: handshaking fixes and improvments
  • From: Petr Štetiar
• Re: [PATCH v1 12/12] serial: 8250_lpss: enable DMA on Intel Quark UART
  • From: Andy Shevchenko
• Re: [PATCH v1 12/12] serial: 8250_lpss: enable DMA on Intel Quark UART
  • From: Andy Shevchenko
• Re: [PATCH v1 12/12] serial: 8250_lpss: enable DMA on Intel Quark UART
  • From: Bryan O'Donoghue
• [PATCH] Revert "serial-uartlite: Constify uartlite_be/uartlite_le"
  • From: Sudip Mukherjee
• Re: [PATCH v2 07/11] serial: 8250: enable AFE on ports where FIFO is 16 bytes
  • From: Peter Hurley
• Re: [PATCH v1 09/12] serial: 8250_lpss: split LPSS driver to separate module
  • From: Andy Shevchenko
• [PATCH v2 00/11] serial: 8250: split LPSS to 8250_lpss, enable DMA on Quark
  • From: Andy Shevchenko
• [PATCH v2 02/11] dmaengine: dw: provide probe(), remove() stubs for users
  • From: Andy Shevchenko
• [PATCH v2 06/11] serial: 8250_dma: adjust DMA address of the UART
  • From: Andy Shevchenko
• [PATCH v2 05/11] serial: 8250_dma: switch to new dmaengine_terminate_* API
  • From: Andy Shevchenko
• [PATCH v2 09/11] serial: 8250_lpss: move Quark code from PCI driver
  • From: Andy Shevchenko
• [PATCH v2 03/11] dmaengine: dw: set polarity of handshake interface
  • From: Andy Shevchenko
• [PATCH v2 07/11] serial: 8250: enable AFE on ports where FIFO is 16 bytes
  • From: Andy Shevchenko
• [PATCH v2 08/11] serial: 8250_lpss: split LPSS driver to separate module
  • From: Andy Shevchenko
• [PATCH v2 10/11] serial: 8250_lpss: enable MSI for Intel Quark
  • From: Andy Shevchenko
• [PATCH v2 11/11] serial: 8250_lpss: enable DMA on Intel Quark UART
  • From: Andy Shevchenko
• [PATCH v2 04/11] dmaengine: dw: override LLP support if asked in platform data
  • From: Andy Shevchenko
• [PATCH v2 01/11] dmaengine: dw: keep copy of custom slave config in dwc
  • From: Andy Shevchenko
• Re: [PATCH 5/6] serial: 8250: Extract IIR logic steering from rx dma
  • From: Andy Shevchenko
• Re: [PATCH] tty: serial: 8250_omap: do not defer termios changes
  • From: John Ogness
• [PATCH 6/6] serial: omap8250: Terminate rx dma only for flushes
  • From: Peter Hurley
• [PATCH 5/6] serial: 8250: Extract IIR logic steering from rx dma
  • From: Peter Hurley
• [PATCH 4/6] serial: omap8250: Simplify rx dma completion interface
  • From: Peter Hurley
• [PATCH 3/6] serial: omap8250: Drop rx buffer sync
  • From: Peter Hurley
• [PATCH 2/6] serial: 8250: Validate dmaengine tx chan meets requirements
  • From: Peter Hurley
• [PATCH 1/6] serial: 8250: Validate dmaengine rx chan meets requirements
  • From: Peter Hurley
• [PATCH 0/6] serial: 8250: dma fixes
  • From: Peter Hurley
• [PATCH 4/4] serial: 8250: Remove unused define
  • From: Peter Hurley
• [PATCH 3/4] serial: omap8250: Eliminate local in omap8250_runtime_resume()
  • From: Peter Hurley