On 05/16/2016 04:35 AM, Zhen Lei wrote: > Sometimes, we may only use SSH to login, and build 8250 uart driver as a > ko(insmod if needed). But the earlycon may still be necessary, because > the kernel boot process may take a long time. It's not good to display > nothing but ask people to wait patiently. I'm confused; you want the possibility of earlycon but _not_ a normal serial console? This configuration is unsafe because nothing prevents the 8250 driver and 8250 earlycon from concurrently accessing the hardware. > In addition, the 8250.ko can not be worked if we have not opened any > other serial drivers, because SERIAL_CORE would not be selected. I don't understand what this means. Regards, Peter Hurley > Signed-off-by: Zhen Lei <thunder.leizhen@xxxxxxxxxx> > --- > drivers/tty/serial/8250/Kconfig | 9 +++++++-- > drivers/tty/serial/8250/Makefile | 1 - > drivers/tty/serial/Makefile | 1 + > 3 files changed, 8 insertions(+), 3 deletions(-) > > diff --git a/drivers/tty/serial/8250/Kconfig b/drivers/tty/serial/8250/Kconfig > index 4d7cb9c..2992f0a 100644 > --- a/drivers/tty/serial/8250/Kconfig > +++ b/drivers/tty/serial/8250/Kconfig > @@ -3,6 +3,12 @@ > # you somehow have an implicit or explicit dependency on SERIAL_8250. > # > > +config SERIAL_8250_EARLYCON > + bool "Early console using 8250" > + select SERIAL_CORE > + select SERIAL_CORE_CONSOLE > + select SERIAL_EARLYCON > + > config SERIAL_8250 > tristate "8250/16550 and compatible serial support" > select SERIAL_CORE > @@ -60,8 +66,7 @@ config SERIAL_8250_PNP > config SERIAL_8250_CONSOLE > bool "Console on 8250/16550 and compatible serial port" > depends on SERIAL_8250=y > - select SERIAL_CORE_CONSOLE > - select SERIAL_EARLYCON > + select SERIAL_8250_EARLYCON > ---help--- > If you say Y here, it will be possible to use a serial port as the > system console (the system console is the device which receives all > diff --git a/drivers/tty/serial/8250/Makefile b/drivers/tty/serial/8250/Makefile > index c9a2d6e..1f24c74 100644 > --- a/drivers/tty/serial/8250/Makefile > +++ b/drivers/tty/serial/8250/Makefile > @@ -13,7 +13,6 @@ obj-$(CONFIG_SERIAL_8250_HP300) += 8250_hp300.o > obj-$(CONFIG_SERIAL_8250_CS) += serial_cs.o > obj-$(CONFIG_SERIAL_8250_ACORN) += 8250_acorn.o > obj-$(CONFIG_SERIAL_8250_BCM2835AUX) += 8250_bcm2835aux.o > -obj-$(CONFIG_SERIAL_8250_CONSOLE) += 8250_early.o > obj-$(CONFIG_SERIAL_8250_FOURPORT) += 8250_fourport.o > obj-$(CONFIG_SERIAL_8250_ACCENT) += 8250_accent.o > obj-$(CONFIG_SERIAL_8250_BOCA) += 8250_boca.o > diff --git a/drivers/tty/serial/Makefile b/drivers/tty/serial/Makefile > index 8c261ad..cd84181 100644 > --- a/drivers/tty/serial/Makefile > +++ b/drivers/tty/serial/Makefile > @@ -19,6 +19,7 @@ obj-$(CONFIG_SERIAL_SUNSAB) += sunsab.o > > # Now bring in any enabled 8250/16450/16550 type drivers. > obj-$(CONFIG_SERIAL_8250) += 8250/ > +obj-$(CONFIG_SERIAL_8250_EARLYCON) += 8250/8250_early.o > > obj-$(CONFIG_SERIAL_AMBA_PL010) += amba-pl010.o > obj-$(CONFIG_SERIAL_AMBA_PL011) += amba-pl011.o > -- > 2.5.0 > > > -- > To unsubscribe from this list: send the line "unsubscribe linux-serial" in > the body of a message to majordomo@xxxxxxxxxxxxxxx > More majordomo info at http://vger.kernel.org/majordomo-info.html > -- To unsubscribe from this list: send the line "unsubscribe linux-serial" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
