Linux Serial
[Prev Page][Next Page]
- Re: [PATCH v11 3/3] arm64: dts: mediatek: Initial mt8365-evk support
- Re: [PATCH v3 06/20] dt-bindings: pinctrl: samsung: add google,gs101-pinctrl compatible
- Re: [PATCH v3 03/20] dt-bindings: soc: google: exynos-sysreg: add dedicated SYSREG compatibles to GS101
- Re: [PATCH v3 3/4] trigger: ledtrig-tty: move variable definition to the top
- Re: [PATCH v3 1/4] tty: whitespaces in descriptions corrected by replacing tabs with spaces.
- Re: [PATCH] serial: 8250_dw: Allow TX FIFO to drain before writing to UART_LCR An issue has been observed on the Broadcom BCM56160 serial port which appears closely related to a similar issue on the Marvell Armada 38x serial port.
- Re: [PATCH] serial: 8250_dw: Allow TX FIFO to drain before writing to UART_LCR An issue has been observed on the Broadcom BCM56160 serial port which appears closely related to a similar issue on the Marvell Armada 38x serial port.
- Re: [PATCH v6 10/11] ARM: dts: stm32: add ETZPC as a system bus for STM32MP15x boards
- Re: [PATCH 3/3] serial: core: Update uart_poll_timeout function to return unsigned int
- Re: [PATCH 2/3] serial: core: Make local variable size to u64
- Re: [PATCH v2 1/3] serial: core: Potential overflow of frame_time
- Re: [PATCH v3 0/6] Fixes and improvements for RS485
- Re: [PATCH v3 0/6] Fixes and improvements for RS485
- Re: [PATCH 1/3] serial: core: Potential overflow of frame_time
- Re: [PATCH v3 3/6] serial: core: fix sanitizing check for RTS settings
- Re: [PATCH v3 3/6] serial: core: fix sanitizing check for RTS settings
- Re: [PATCH] serial: amba-pl011: set fwnode from parent device
- Re: [PATCH v3 3/4] trigger: ledtrig-tty: move variable definition to the top
- Re: Regression: serial: 8250_omap: error during suspend if no_console_suspend is set
- From: Linux regression tracking #update (Thorsten Leemhuis)
- Re: [PATCH v3 3/4] trigger: ledtrig-tty: move variable definition to the top
- Re: Kernel 6.5 ttyS1 hang with qemu (was Re: [OE-core] Summary of the remaining 6.5 kernel serial issue (and 6.5 summary)
- Re: Kernel 6.5 ttyS1 hang with qemu (was Re: [OE-core] Summary of the remaining 6.5 kernel serial issue (and 6.5 summary)
- Re: [PATCH] dt-bindings: serial: re-order entries to match coding convention
- Re: [PATCH v3 7/7] tty: 8250: Add Brainboxes Oxford Semiconductor-based quirks
- Re: [PATCH v3 2/7] tty: 8250: Add support for additional Brainboxes UC cards
- Re: [PATCH v3 1/7] tty: 8250: Fix IS-200 PCI ID comment
- Re: Kernel 6.5 ttyS1 hang with qemu (was Re: [OE-core] Summary of the remaining 6.5 kernel serial issue (and 6.5 summary)
- Re: Kernel 6.5 ttyS1 hang with qemu (was Re: [OE-core] Summary of the remaining 6.5 kernel serial issue (and 6.5 summary)
- [PATCH v3 0/4] ledtrig-tty: add additional tty state evaluation
- [PATCH v3 1/4] tty: whitespaces in descriptions corrected by replacing tabs with spaces.
- [PATCH v3 4/4] trigger: ledtrig-tty: add new line mode to triggers
- [PATCH v3 2/4] tty: add new helper function tty_get_tiocm
- [PATCH v3 3/4] trigger: ledtrig-tty: move variable definition to the top
- Re: Kernel 6.5 ttyS1 hang with qemu (was Re: [OE-core] Summary of the remaining 6.5 kernel serial issue (and 6.5 summary)
- [PATCH] dt-bindings: serial: re-order entries to match coding convention
- From: Krzysztof Kozlowski
- Re: [PATCH 1/2] dt-bindings: serial: sc16is7xx: move 'allOf' block after 'required'
- From: Krzysztof Kozlowski
- Re: [PATCH 2/2] dt-bindings: serial: sc16is7xx: remove 'clock-frequency' property
- From: Krzysztof Kozlowski
- Re: Kernel 6.5 ttyS1 hang with qemu (was Re: [OE-core] Summary of the remaining 6.5 kernel serial issue (and 6.5 summary)
- Re: [PATCH v3 7/7] tty: 8250: Add Brainboxes Oxford Semiconductor-based quirks
- Re: [PATCH v3 6/7] tty: 8250: Add support for Intashield IX cards
- Re: [PATCH v3 5/7] tty: 8250: Add support for and fix up additional Brainboxes PX cards
- Re: [PATCH v3 4/7] tty: 8250: Add support for Intashield IS-100
- Re: [PATCH v3 3/7] tty: 8250: Add support for Brainboxes UP cards
- Re: [PATCH v3 2/7] tty: 8250: Add support for additional Brainboxes UC cards
- Re: [PATCH v3 1/7] tty: 8250: Fix IS-200 PCI ID comment
- Re: [PATCH v2 1/3] serial: core: Potential overflow of frame_time
- Re: [Patch v2 6/6] tty: serial: 8250: Add support for MOXA PCIe boards to switch interface between RS422/RS485
- Re: [Patch v2 5/6] tty: serial: 8250: Fix MOXA RS422/RS485 PCIe boards not work by default
- Re: [Patch v2 4/6] tty: serial: 8250: Add support for MOXA Mini PCIe boards
- Re: [Patch v2 3/6] tty: serial: 8250: Relocate macros within 8250_pci.c
- Re: [Patch v2 2/6] tty: serial: 8250: Cleanup MOXA configurations within 8250_pci.c
- Re: [Patch v2 1/6] tty: serial: 8250: Modify MOXA enum name within 8250_pci.c
- [Patch v2 6/6] tty: serial: 8250: Add support for MOXA PCIe boards to switch interface between RS422/RS485
- [Patch v2 5/6] tty: serial: 8250: Fix MOXA RS422/RS485 PCIe boards not work by default
- [Patch v2 4/6] tty: serial: 8250: Add support for MOXA Mini PCIe boards
- [Patch v2 3/6] tty: serial: 8250: Relocate macros within 8250_pci.c
- [Patch v2 2/6] tty: serial: 8250: Cleanup MOXA configurations within 8250_pci.c
- [Patch v2 1/6] tty: serial: 8250: Modify MOXA enum name within 8250_pci.c
- [Patch v2 0/6] tty: serial: 8250: Changes of MOXA PCIe boards in 8250_pci.c
- Re: [PATCH] dt-bindings: serial: snps-dw-apb-uart: Add property to drain TX FIFO
- [PATCH] dt-bindings: serial: snps-dw-apb-uart: Add property to drain TX FIFO
- [PATCH] serial: 8250_dw: Allow TX FIFO to drain before writing to UART_LCR An issue has been observed on the Broadcom BCM56160 serial port which appears closely related to a similar issue on the Marvell Armada 38x serial port.
- [PATCH] dt-bindings: serial: snps-dw-apb-uart: Add property to drain TX FIFO
- Re: Kernel 6.5 ttyS1 hang with qemu (was Re: [OE-core] Summary of the remaining 6.5 kernel serial issue (and 6.5 summary)
- Re: [PATCH v2 1/3] serial: core: Potential overflow of frame_time
- [PATCH v3 7/7] tty: 8250: Add Brainboxes Oxford Semiconductor-based quirks
- [PATCH v3 6/7] tty: 8250: Add support for Intashield IX cards
- [PATCH v3 3/7] tty: 8250: Add support for Brainboxes UP cards
- [PATCH v3 4/7] tty: 8250: Add support for Intashield IS-100
- [PATCH v3 5/7] tty: 8250: Add support for and fix up additional Brainboxes PX cards
- [PATCH v3 2/7] tty: 8250: Add support for additional Brainboxes UC cards
- [PATCH v3 1/7] tty: 8250: Fix IS-200 PCI ID comment
- [PATCH v3 0/7] Brainboxes serial cards additions/fixes
- Re: [GIT PULL] TTY/Serial driver fixes for 6.6-rc6
- Re: Kernel 6.5 ttyS1 hang with qemu (was Re: [OE-core] Summary of the remaining 6.5 kernel serial issue (and 6.5 summary)
- [GIT PULL] TTY/Serial driver fixes for 6.6-rc6
- Re: [PATCH v3 0/6] Fixes and improvements for RS485
- Re: Kernel 6.5 ttyS1 hang with qemu (was Re: [OE-core] Summary of the remaining 6.5 kernel serial issue (and 6.5 summary)
- Re: [PATCH v2 1/3] serial: core: Potential overflow of frame_time
- Re: [PATCH v2 1/7] tty: 8250: Fix IS-200 PCI ID comment
- [PATCH v2 1/3] serial: core: Potential overflow of frame_time
- Re: [PATCH v3 3/6] serial: core: fix sanitizing check for RTS settings
- Re: [PATCH v2 1/7] tty: 8250: Fix IS-200 PCI ID comment
- [PATCH v6] tty: serial: meson: fix hard LOCKUP on crtscts mode
- Re: Kernel 6.5 ttyS1 hang with qemu (was Re: [OE-core] Summary of the remaining 6.5 kernel serial issue (and 6.5 summary)
- [PATCH 3/3] serial: core: Update uart_poll_timeout function to return unsigned int
- [PATCH 2/3] serial: core: Make local variable size to u64
- [PATCH 1/3] serial: core: Potential overflow of frame_time
- [PATCH 0/3] serial core type consistency and overflow checks
- Re: Kernel 6.5 ttyS1 hang with qemu (was Re: [OE-core] Summary of the remaining 6.5 kernel serial issue (and 6.5 summary)
- Re: [PATCH v2 1/7] tty: 8250: Fix IS-200 PCI ID comment
- Re: [PATCH v5] tty: serial: meson: fix hard LOCKUP on crtscts mode
- Re: [PATCH v3 4/4] clk: renesas: add minimal boot support for RZ/G3S SoC
- [PATCH v2 7/7] tty: 8250: Add Brainboxes Oxford Semiconductor-based quirks
- [PATCH v2 6/7] tty: 8250: Add support for Intashield IX cards
- [PATCH v2 5/7] tty: 8250: Add support for and fix up additional Brainboxes PX cards
- [PATCH v2 4/7] tty: 8250: Add support for Intashield IS-100
- [PATCH v2 3/7] tty: 8250: Add support for Brainboxes UP cards
- [PATCH v2 2/7] tty: 8250: Add support for additional Brainboxes UC cards
- [PATCH v2 1/7] tty: 8250: Fix IS-200 PCI ID comment
- [PATCH v2 0/7] Brainboxes serial cards additions/fixes
- Re: [PATCH] serial: amba-pl011: set fwnode from parent device
- [PATCH v5] tty: serial: meson: fix hard LOCKUP on crtscts mode
- Re: [PATCH v4] tty: serial: meson: fix hard LOCKUP on crtscts mode
- [PATCH] serial: amba-pl011: set fwnode from parent device
- From: Emil Kronborg Andersen
- Re: [PATCH v2 7/8] tty: Add SBI debug console support to HVC SBI driver
- Re: [PATCH v4] tty: serial: meson: fix hard LOCKUP on crtscts mode
- [PATCH 2/2] dt-bindings: serial: sc16is7xx: remove 'clock-frequency' property
- [PATCH 0/2] serial: sc16is7xx: device tree improvements
- [PATCH 1/2] dt-bindings: serial: sc16is7xx: move 'allOf' block after 'required'
- Re: [PATCH v4] tty: serial: meson: fix hard LOCKUP on crtscts mode
- [PATCH v4] tty: serial: meson: fix hard LOCKUP on crtscts mode
- Re: [PATCH V2 1/2] dt-bindings: Add optional gpio property to uartps node to support rs485
- Re: [PATCH v2] tty: serial: meson: hard LOCKUP on crtscts mode
- Re: [PATCH v2] tty: serial: meson: hard LOCKUP on crtscts mode
- Re: [PATCH v3 3/6] serial: core: fix sanitizing check for RTS settings
- Re: [PATCH v3] tty: serial: meson: hard LOCKUP on crtscts mode
- Re: [PATCH v3] tty: serial: meson: hard LOCKUP on crtscts mode
- Re: [PATCH] vt: Clean up errors in selection.h
- [PATCH] vt: Clean up errors in selection.h
- Re: [PATCH v3 3/6] serial: core: fix sanitizing check for RTS settings
- Re: [PATCH V2 1/2] dt-bindings: Add optional gpio property to uartps node to support rs485
- [PATCH v5 tty-next 0/2] serial: Add driver for National Instruments UARTs
- [PATCH v5 tty-next 2/2] serial: 8250: add driver for NI UARTs
- [PATCH v5 tty-next 1/2] dt-bindings: serial: ni,ni16650: add bindings
- Re: [PATCH V2 2/2] tty: serial: uartps: Add rs485 support to uartps driver
- Re: [PATCH V2 1/2] dt-bindings: Add optional gpio property to uartps node to support rs485
- Re: [PATCH v2] dt-bindings: serial: max310x: convert to YAML
- From: Krzysztof Kozlowski
- Re: [PATCH v3 02/20] dt-bindings: clock: Add Google gs101 clock management unit bindings
- Re: [PATCH v3 12/20] clk: samsung: clk-gs101: Add support for CMU_MISC clock unit
- [PATCH v3] tty: serial: meson: hard LOCKUP on crtscts mode
- Re: [PATCH v6 10/11] ARM: dts: stm32: add ETZPC as a system bus for STM32MP15x boards
- [PATCH v2] dt-bindings: serial: max310x: convert to YAML
- Re: [PATCH] dt-bindings: max310x: convert to YAML
- Re: [PATCH v3 16/20] tty: serial: samsung: Add gs101 compatible and SoC data
- From: Krzysztof Kozlowski
- Re: [PATCH v3 16/20] tty: serial: samsung: Add gs101 compatible and SoC data
- Re: [PATCH] dt-bindings: max310x: convert to YAML
- From: Krzysztof Kozlowski
- Re: [PATCH] dt-bindings: max310x: convert to YAML
- Re: [PATCH v3 10/20] clk: samsung: clk-gs101: Add cmu_top registers, plls, mux and gates
- Re: [PATCH v2] tty: serial: meson: hard LOCKUP on crtscts mode
- [PATCH v2] tty: serial: meson: hard LOCKUP on crtscts mode
- Re: [PATCH v3 3/6] serial: core: fix sanitizing check for RTS settings
- Re: [PATCH] tty: serial: meson: hard LOCKUP on crtscts mode
- Re: [PATCH v3 10/20] clk: samsung: clk-gs101: Add cmu_top registers, plls, mux and gates
- From: Krzysztof Kozlowski
- Re: [PATCH v3 10/20] clk: samsung: clk-gs101: Add cmu_top registers, plls, mux and gates
- Re: [PATCH v3 09/20] clk: samsung: clk-pll: Add support for pll_{0516,0517,518}
- Re: [PATCH v2 7/8] tty: Add SBI debug console support to HVC SBI driver
- Re: [PATCH v3 02/20] dt-bindings: clock: Add Google gs101 clock management unit bindings
- From: Krzysztof Kozlowski
- Re: [PATCH v2 07/20] dt-bindings: pinctrl: samsung: add gs101-wakeup-eint compatible
- Re: [PATCH v3 05/20] dt-bindings: arm: google: Add bindings for Google ARM platforms
- Re: [PATCH v3 1/6] serial: Do not hold the port lock when setting rx-during-tx GPIO
- Re: [PATCH v3 04/20] dt-bindings: watchdog: Document Google gs101 & gs201 watchdog bindings
- Re: [PATCH v3 02/20] dt-bindings: clock: Add Google gs101 clock management unit bindings
- Re: [PATCH] tty: serial: meson: hard LOCKUP on crtscts mode
- Re: [PATCH] serial: xilinx_uartps: unset STOPBRK when setting STARTBRK
- Re: [PATCH v3 02/20] dt-bindings: clock: Add Google gs101 clock management unit bindings
- [PATCH] tty: serial: meson: hard LOCKUP on crtscts mode
- Re: [PATCH v3 02/20] dt-bindings: clock: Add Google gs101 clock management unit bindings
- From: Krzysztof Kozlowski
- Re: [PATCH v3 02/20] dt-bindings: clock: Add Google gs101 clock management unit bindings
- Re: [PATCH v3 02/20] dt-bindings: clock: Add Google gs101 clock management unit bindings
- From: Krzysztof Kozlowski
- Re: [PATCH v2 3/4] trigger: ledtrig-tty: move variable definition to the top
- Re: [PATCH v3 02/20] dt-bindings: clock: Add Google gs101 clock management unit bindings
- Re: [PATCH] dt-bindings: max310x: convert to YAML
- From: Krzysztof Kozlowski
- Re: [PATCH] serial: xilinx_uartps: unset STOPBRK when setting STARTBRK
- From: Julien MALIK - UNSEENLABS
- Re: [PATCH v3 18/20] arm64: dts: google: Add initial Oriole/pixel 6 board support
- Re: [PATCH v3 17/20] arm64: dts: google: Add initial Google gs101 SoC support
- From: Krzysztof Kozlowski
- Re: [PATCH v3 17/20] arm64: dts: google: Add initial Google gs101 SoC support
- Re: [PATCH v3 17/20] arm64: dts: google: Add initial Google gs101 SoC support
- From: Krzysztof Kozlowski
- Re: [PATCH v3 18/20] arm64: dts: google: Add initial Oriole/pixel 6 board support
- From: Krzysztof Kozlowski
- Re: [PATCH v3 17/20] arm64: dts: google: Add initial Google gs101 SoC support
- From: Krzysztof Kozlowski
- Re: [PATCH v3 00/20] Add minimal Tensor/GS101 SoC support and Oriole/Pixel6 board
- From: Krzysztof Kozlowski
- Re: [PATCH v3 16/20] tty: serial: samsung: Add gs101 compatible and SoC data
- From: Krzysztof Kozlowski
- Re: [PATCH v3 15/20] watchdog: s3c2410_wdt: Add support for Google tensor SoCs
- From: Krzysztof Kozlowski
- Re: [PATCH v3 19/20] arm64: defconfig: Enable Google Tensor SoC
- Re: [PATCH v3 07/20] dt-bindings: pinctrl: samsung: add gs101-wakeup-eint compatible
- From: Krzysztof Kozlowski
- Re: [PATCH v3 02/20] dt-bindings: clock: Add Google gs101 clock management unit bindings
- From: Krzysztof Kozlowski
- Re: [PATCH v3 02/20] dt-bindings: clock: Add Google gs101 clock management unit bindings
- From: Krzysztof Kozlowski
- Re: [PATCH v3 16/20] tty: serial: samsung: Add gs101 compatible and SoC data
- Re: [PATCH v3 20/20] MAINTAINERS: add entry for Google Tensor SoC
- Re: [PATCH v3 14/20] pinctrl: samsung: Add gs101 SoC pinctrl configuration
- Re: [PATCH v3 16/20] tty: serial: samsung: Add gs101 compatible and SoC data
- [PATCH v2 8/8] RISC-V: Enable SBI based earlycon support
- [PATCH v2 7/8] tty: Add SBI debug console support to HVC SBI driver
- [PATCH v2 6/8] tty/serial: Add RISC-V SBI debug console based earlycon
- [PATCH v2 5/8] RISC-V: Add inline version of sbi_console_putchar/getchar() functions
- [PATCH v2 4/8] RISC-V: KVM: Forward SBI DBCN extension to user-space
- [PATCH v2 3/8] RISC-V: KVM: Allow some SBI extensions to be disabled by default
- [PATCH v2 2/8] RISC-V: KVM: Change the SBI specification version to v2.0
- [PATCH v2 1/8] RISC-V: Add defines for SBI debug console extension
- [PATCH v2 0/8] RISC-V SBI debug console extension support
- Re: [PATCH v3 15/20] watchdog: s3c2410_wdt: Add support for Google tensor SoCs
- Re: [PATCH v3 12/20] clk: samsung: clk-gs101: Add support for CMU_MISC clock unit
- Re: [PATCH v3 11/20] clk: samsung: clk-gs101: add CMU_APM support
- Re: [PATCH v3 10/20] clk: samsung: clk-gs101: Add cmu_top registers, plls, mux and gates
- Re: [PATCH v3 09/20] clk: samsung: clk-pll: Add support for pll_{0516,0517,518}
- Re: [PATCH v3 08/20] dt-bindings: serial: samsung: Add google-gs101-uart compatible
- Re: [PATCH v2 07/20] dt-bindings: pinctrl: samsung: add gs101-wakeup-eint compatible
- Re: [PATCH v3 06/20] dt-bindings: pinctrl: samsung: add google,gs101-pinctrl compatible
- Re: [PATCH v3 05/20] dt-bindings: arm: google: Add bindings for Google ARM platforms
- Re: [PATCH v3 04/20] dt-bindings: watchdog: Document Google gs101 & gs201 watchdog bindings
- Re: [PATCH v3 03/20] dt-bindings: soc: google: exynos-sysreg: add dedicated SYSREG compatibles to GS101
- Re: [PATCH v3 02/20] dt-bindings: clock: Add Google gs101 clock management unit bindings
- Re: [PATCH v3 00/20] Add minimal Tensor/GS101 SoC support and Oriole/Pixel6 board
- Re: [PATCH v3 13/20] pinctrl: samsung: Add filter selection support for alive banks
- Re: [PATCH v3 1/6] serial: Do not hold the port lock when setting rx-during-tx GPIO
- [PATCH] dt-bindings: max310x: convert to YAML
- Re: [PATCH v3 00/20] Add minimal Tensor/GS101 SoC support and Oriole/Pixel6 board
- Re: [PATCH v3 18/20] arm64: dts: google: Add initial Oriole/pixel 6 board support
- Re: [PATCH v3 19/20] arm64: defconfig: Enable Google Tensor SoC
- Re: [PATCH v3 17/20] arm64: dts: google: Add initial Google gs101 SoC support
- Re: [PATCH v3 16/20] tty: serial: samsung: Add gs101 compatible and SoC data
- Re: [PATCH v3 14/20] pinctrl: samsung: Add gs101 SoC pinctrl configuration
- Re: [PATCH v3 14/20] pinctrl: samsung: Add gs101 SoC pinctrl configuration
- Re: [PATCH v3 13/20] pinctrl: samsung: Add filter selection support for alive banks
- Re: [PATCH v3 11/20] clk: samsung: clk-gs101: add CMU_APM support
- Re: [PATCH v3 10/20] clk: samsung: clk-gs101: Add cmu_top registers, plls, mux and gates
- Re: [PATCH v3 12/20] clk: samsung: clk-gs101: Add support for CMU_MISC clock unit
- Re: [PATCH v3 09/20] clk: samsung: clk-pll: Add support for pll_{0516,0517,518}
- Re: [PATCH v3 02/20] dt-bindings: clock: Add Google gs101 clock management unit bindings
- Re: [PATCH v3 15/20] watchdog: s3c2410_wdt: Add support for Google tensor SoCs
- Re: [PATCH v5] arch/x86: port I/O tracing on x86
- Re: [PATCH v5] arch/x86: port I/O tracing on x86
- Re: [PATCH v3 01/20] dt-bindings: soc: samsung: exynos-pmu: Add gs101 compatible
- [PATCH v3 20/20] MAINTAINERS: add entry for Google Tensor SoC
- [PATCH v3 19/20] arm64: defconfig: Enable Google Tensor SoC
- [PATCH v3 17/20] arm64: dts: google: Add initial Google gs101 SoC support
- [PATCH v3 18/20] arm64: dts: google: Add initial Oriole/pixel 6 board support
- [PATCH v3 16/20] tty: serial: samsung: Add gs101 compatible and SoC data
- [PATCH v3 15/20] watchdog: s3c2410_wdt: Add support for Google tensor SoCs
- [PATCH v3 13/20] pinctrl: samsung: Add filter selection support for alive banks
- [PATCH v3 14/20] pinctrl: samsung: Add gs101 SoC pinctrl configuration
- [PATCH v3 07/20] dt-bindings: pinctrl: samsung: add gs101-wakeup-eint compatible
- [PATCH v3 12/20] clk: samsung: clk-gs101: Add support for CMU_MISC clock unit
- [PATCH v3 10/20] clk: samsung: clk-gs101: Add cmu_top registers, plls, mux and gates
- [PATCH v3 11/20] clk: samsung: clk-gs101: add CMU_APM support
- [PATCH v3 08/20] dt-bindings: serial: samsung: Add google-gs101-uart compatible
- [PATCH v3 09/20] clk: samsung: clk-pll: Add support for pll_{0516,0517,518}
- [PATCH v3 06/20] dt-bindings: pinctrl: samsung: add google,gs101-pinctrl compatible
- [PATCH v3 05/20] dt-bindings: arm: google: Add bindings for Google ARM platforms
- [PATCH v3 04/20] dt-bindings: watchdog: Document Google gs101 & gs201 watchdog bindings
- [PATCH v3 02/20] dt-bindings: clock: Add Google gs101 clock management unit bindings
- [PATCH v3 03/20] dt-bindings: soc: google: exynos-sysreg: add dedicated SYSREG compatibles to GS101
- [PATCH v3 00/20] Add minimal Tensor/GS101 SoC support and Oriole/Pixel6 board
- [PATCH v3 01/20] dt-bindings: soc: samsung: exynos-pmu: Add gs101 compatible
- Re: [PATCH v2 16/20] tty: serial: samsung: Add gs101 compatible and SoC data
- [PATCH v3 6/6] serial: omap: do not override settings for RS485 support
- [PATCH v3 3/6] serial: core: fix sanitizing check for RTS settings
- [PATCH v3 5/6] serial: core, imx: do not set RS485 enabled if it is not supported
- [PATCH v3 1/6] serial: Do not hold the port lock when setting rx-during-tx GPIO
- [PATCH v3 4/6] serial: core: make sure RS485 cannot be enabled when it is not supported
- [PATCH v3 2/6] serial: core: set missing supported flag for RX during TX GPIO
- [PATCH v3 0/6] Fixes and improvements for RS485
- Re: [PATCH v2 2/7] serial: amba-pl011: get rid of useless wrapper pl011_get_rs485_mode()
- Re: [PATCH v2 2/7] serial: amba-pl011: get rid of useless wrapper pl011_get_rs485_mode()
- Re: [PATCH v2 2/7] serial: amba-pl011: get rid of useless wrapper pl011_get_rs485_mode()
- Re: [PATCH v2 2/7] serial: amba-pl011: get rid of useless wrapper pl011_get_rs485_mode()
- [PATCH v2 4/7] serial: core: fix sanitizing check for RTS settings
- [PATCH v2 5/7] serial: core: make sure RS485 cannot be enabled when it is not supported
- [PATCH v2 6/7] serial: core, imx: do not set RS485 enabled if it is not supported
- [PATCH v2 7/7] serial: omap: do not override settings for RS485 support
- [PATCH v2 3/7] serial: core: set missing supported flag for RX during TX GPIO
- [PATCH v2 2/7] serial: amba-pl011: get rid of useless wrapper pl011_get_rs485_mode()
- [PATCH v2 1/7] serial: Do not hold the port lock when setting rx-during-tx GPIO
- [PATCH v2 0/7] Fixes and improvements for RS485
- Re: [PATCH 2/6] RISC-V: KVM: Change the SBI specification version to v2.0
- Re: [PATCH 2/6] RISC-V: KVM: Change the SBI specification version to v2.0
- [PATCH V2 2/2] tty: serial: uartps: Add rs485 support to uartps driver
- From: Manikanta Guntupalli
- [PATCH V2 1/2] dt-bindings: Add optional gpio property to uartps node to support rs485
- From: Manikanta Guntupalli
- [PATCH V2 0/2] Add rs485 support to uartps driver
- From: Manikanta Guntupalli
- Re: [PATCH v2 15/20] watchdog: s3c2410_wdt: Add support for Google tensor SoCs
- Re: [PATCH v2 00/20] Add minimal Tensor/GS101 SoC support and Oriole/Pixel6 board
- Re: [PATCH v2 08/20] dt-bindings: serial: samsung: Add google-gs101-uart compatible
- From: Krzysztof Kozlowski
- Re: [PATCH v2 08/20] dt-bindings: serial: samsung: Add google-gs101-uart compatible
- [PATCH] serial: max310x: remove trailing whitespaces
- Re: [PATCH v2 00/20] Add minimal Tensor/GS101 SoC support and Oriole/Pixel6 board
- From: Krzysztof Kozlowski
- Re: [PATCH v2 00/20] Add minimal Tensor/GS101 SoC support and Oriole/Pixel6 board
- From: Krzysztof Kozlowski
- Re: [PATCH v2 08/20] dt-bindings: serial: samsung: Add google-gs101-uart compatible
- From: Krzysztof Kozlowski
- Re: [PATCH v2 08/20] dt-bindings: serial: samsung: Add google-gs101-uart compatible
- From: Krzysztof Kozlowski
- Re: [PATCH v2 08/20] dt-bindings: serial: samsung: Add google-gs101-uart compatible
- Re: [PATCH v2 08/20] dt-bindings: serial: samsung: Add google-gs101-uart compatible
- Re: [PATCH 2/6] RISC-V: KVM: Change the SBI specification version to v2.0
- Re: [PATCH 3/6] RISC-V: KVM: Forward SBI DBCN extension to user-space
- Re: [PATCH v2 08/20] dt-bindings: serial: samsung: Add google-gs101-uart compatible
- Re: [PATCH v2 08/20] dt-bindings: serial: samsung: Add google-gs101-uart compatible
- Re: [PATCH v2 08/20] dt-bindings: serial: samsung: Add google-gs101-uart compatible
- Re: [PATCH v2 00/20] Add minimal Tensor/GS101 SoC support and Oriole/Pixel6 board
- Re: [PATCH v2 00/20] Add minimal Tensor/GS101 SoC support and Oriole/Pixel6 board
- Re: [PATCH v6 10/11] ARM: dts: stm32: add ETZPC as a system bus for STM32MP15x boards
- Re: [PATCH v2 08/20] dt-bindings: serial: samsung: Add google-gs101-uart compatible
- Re: [PATCH v2 00/20] Add minimal Tensor/GS101 SoC support and Oriole/Pixel6 board
- Re: [PATCH v2 00/20] Add minimal Tensor/GS101 SoC support and Oriole/Pixel6 board
- Re: [PATCH v2 00/20] Add minimal Tensor/GS101 SoC support and Oriole/Pixel6 board
- Re: [PATCH 2/6] RISC-V: KVM: Change the SBI specification version to v2.0
- Re: [PATCH 3/6] RISC-V: KVM: Forward SBI DBCN extension to user-space
- [tty:tty-testing] BUILD SUCCESS dd976a97d15b47656991e185a94ef42a0fa5cfd4
- Re: [PATCH v2 3/4] trigger: ledtrig-tty: move variable definition to the top
- Re: [PATCH 3/6] RISC-V: KVM: Forward SBI DBCN extension to user-space
- Re: [PATCH 2/6] RISC-V: KVM: Change the SBI specification version to v2.0
- Re: [PATCH v2 00/20] Add minimal Tensor/GS101 SoC support and Oriole/Pixel6 board
- Re: [PATCH 4/6] tty/serial: Add RISC-V SBI debug console based earlycon
- Re: [PATCH 5/6] tty: Add SBI debug console support to HVC SBI driver
- Re: [PATCH v2 15/20] watchdog: s3c2410_wdt: Add support for Google tensor SoCs
- [PATCH v2 18/20] arm64: dts: google: Add initial Oriole/pixel 6 board support
- [PATCH v2 00/20] Add minimal Tensor/GS101 SoC support and Oriole/Pixel6 board
- [PATCH v2 20/20] MAINTAINERS: add entry for Google Tensor SoC
- [PATCH v2 13/20] pinctrl: samsung: Add filter selection support for alive banks
- [PATCH v2 12/20] clk: samsung: clk-gs101: Add support for CMU_MISC clock unit
- [PATCH v2 10/20] clk: samsung: clk-gs101: Add cmu_top registers, plls, mux and gates
- [PATCH v2 16/20] tty: serial: samsung: Add gs101 compatible and SoC data
- [PATCH v2 04/20] dt-bindings: watchdog: Document Google gs101 & gs201 watchdog bindings
- [PATCH v2 03/20] dt-bindings: soc: google: exynos-sysreg: add dedicated SYSREG compatibles to GS101
- [PATCH v2 09/20] clk: samsung: clk-pll: Add support for pll_{0516,0517,518}
- [PATCH v2 19/20] arm64: defconfig: Enable Google Tensor SoC
- [PATCH v2 15/20] watchdog: s3c2410_wdt: Add support for Google tensor SoCs
- [PATCH v2 14/20] pinctrl: samsung: Add gs101 SoC pinctrl configuration
- [PATCH v2 17/20] arm64: dts: google: Add initial Google gs101 SoC support
- [PATCH v2 02/20] dt-bindings: clock: Add Google gs101 clock management unit bindings
- [PATCH v2 08/20] dt-bindings: serial: samsung: Add google-gs101-uart compatible
- [PATCH v2 06/20] dt-bindings: pinctrl: samsung: add google,gs101-pinctrl compatible
- [PATCH v2 05/20] dt-bindings: arm: google: Add bindings for Google ARM platforms
- [PATCH v2 07/20] dt-bindings: pinctrl: samsung: add gs101-wakeup-eint compatible
- [PATCH v2 11/20] clk: samsung: clk-gs101: add CMU_APM support
- [PATCH v2 01/20] dt-bindings: soc: samsung: exynos-pmu: Add gs101 compatible
- Re: [PATCH v2 00/15] sysctl: Remove sentinel elements from drivers
- Re: [PATCH 4/6] tty/serial: Add RISC-V SBI debug console based earlycon
- Re: [PATCH 3/6] RISC-V: KVM: Forward SBI DBCN extension to user-space
- Re: [PATCH 2/6] RISC-V: KVM: Change the SBI specification version to v2.0
- Re: [PATCH 5/6] tty: Add SBI debug console support to HVC SBI driver
- [PATCH 4/6] tty/serial: Add RISC-V SBI debug console based earlycon
- [PATCH 6/6] RISC-V: Enable SBI based earlycon support
- [PATCH 5/6] tty: Add SBI debug console support to HVC SBI driver
- [PATCH 3/6] RISC-V: KVM: Forward SBI DBCN extension to user-space
- [PATCH 2/6] RISC-V: KVM: Change the SBI specification version to v2.0
- [PATCH 1/6] RISC-V: Add defines for SBI debug console extension
- [PATCH 0/6] RISC-V SBI debug console extension support
- [PATCH v6 10/11] ARM: dts: stm32: add ETZPC as a system bus for STM32MP15x boards
- [PATCH v6 08/11] arm64: dts: st: add RIFSC as an access controller for STM32MP25x boards
- [PATCH v6 11/11] ARM: dts: stm32: add ETZPC as a system bus for STM32MP13x boards
- [PATCH v6 09/11] bus: etzpc: introduce ETZPC firewall controller driver
- [PATCH v6 04/11] dt-bindings: bus: document ETZPC
- [PATCH v6 07/11] bus: rifsc: introduce RIFSC firewall controller driver
- [PATCH v6 05/11] firewall: introduce stm32_firewall framework
- [PATCH v6 06/11] of: property: fw_devlink: Add support for "access-controller"
- [PATCH v6 02/11] dt-bindings: treewide: add access-controllers description
- [PATCH v6 00/11] Introduce STM32 Firewall framework
- [PATCH v6 03/11] dt-bindings: bus: document RIFSC
- [PATCH v6 01/11] dt-bindings: document generic access controllers
- Re: serial: 8250_omap: suspend issue with console_suspend disabled
- [PATCH v5 5/5] drivers/tty/serial: add ESP32S3 ACM gadget driver
- [PATCH v5 3/5] drivers/tty/serial: add driver for the ESP32 UART
- [PATCH v5 0/5] serial: add drivers for the ESP32xx serial devices
- [PATCH v5 4/5] dt-bindings: serial: document esp32s3-acm
- [PATCH v5 2/5] dt-bindings: serial: document esp32-uart
- [PATCH v5 1/5] serial: core: tidy invalid baudrate handling in uart_get_baud_rate
- Re: [PATCH 6/7] fs/sysfs/group: make attribute_group pointers const
- Re: [PATCH 6/7] fs/sysfs/group: make attribute_group pointers const
- Re: serial: 8250_omap: suspend issue with console_suspend disabled
- Re: [PATCH 6/7] fs/sysfs/group: make attribute_group pointers const
- Re: [PATCH 6/7] fs/sysfs/group: make attribute_group pointers const
- Re: [PATCH 6/7] fs/sysfs/group: make attribute_group pointers const
- Re: [PATCH 6/7] fs/sysfs/group: make attribute_group pointers const
- Re: [PATCH 6/7] fs/sysfs/group: make attribute_group pointers const
- Re: [PATCH 7/7] block, drivers: make lots of attribute_group globals const
- Re: [PATCH 5/7] drivers/tty/serial_core: add local variable for newly allocated attribute_group**
- Re: [PATCH 6/7] fs/sysfs/group: make attribute_group pointers const
- Re: [PATCH 6/7] fs/sysfs/group: make attribute_group pointers const
- [PATCH 7/7] block, drivers: make lots of attribute_group globals const
- [PATCH 6/7] fs/sysfs/group: make attribute_group pointers const
- [PATCH 5/7] drivers/tty/serial_core: add local variable for newly allocated attribute_group**
- [PATCH v4] tty/sysrq: replace smp_processor_id() with get_cpu()
- From: Muhammad Usama Anjum
- Re: [PATCH v2 00/89] fs: new accessor methods for inode atime and mtime
- Re: [PATCH v3] tty/sysrq: replace smp_processor_id() with get_cpu()
- From: Muhammad Usama Anjum
- Re: serial: 8250_omap: suspend issue with console_suspend disabled
- Re: [PATCH v2] tty: serial: meson: Add a earlycon for the S4 SoC
- [PATCH v2] tty: serial: meson: Add a earlycon for the S4 SoC
- Re: [PATCH v2 11/28] clk: renesas: rzg2l: add a divider clock for RZ/G3S
- Re: [PATCH v3 4/4] clk: renesas: add minimal boot support for RZ/G3S SoC
- Re: [PATCH v3 3/4] clk: renesas: rzg2l: add a divider clock for RZ/G3S
- Re: [PATCH v3 2/4] clk: renesas: rzg2l: refactor sd mux driver
- Kernel 6.5 ttyS1 hang with qemu (was Re: [OE-core] Summary of the remaining 6.5 kernel serial issue (and 6.5 summary)
- Re: [PATCH v2] serial: add PORT_GENERIC definition
- Re: [PATCH 2/2] tty: vc_screen: make vc_class constant
- [tty:tty-linus] BUILD SUCCESS b3fa3cf02e3ce92d32bfdeedd5a6bd0825f55a14
- [PATCH v2] serial: add PORT_GENERIC definition
- [tty:tty-testing] BUILD SUCCESS cfb5e0cece70b36bacbe8f888c096e6370a9c6ba
- [tty:tty-linus] BUILD SUCCESS 81a61051e0ce5fd7e09225c0d5985da08c7954a7
- [PATCH v5] arch/x86: port I/O tracing on x86
- Re: [PATCH] serial: add PORT_ANY definition
- Re: [PATCH v4] arch/x86: port I/O tracing on x86
- Re: [PATCH] serial: core: Fix checks for tx runtime PM state
- [PATCH v4] arch/x86: port I/O tracing on x86
- Re: [PATCH v3] arch/x86: port I/O tracing on x86
- Re: [PATCH 2/2] dt-bindings: serial: allow naming of Bluetooth with GPS children
- Re: [PATCH 1/2] dt-bindings: serial: fix regex pattern for matching serial node children
- Re: [PATCH] serial: core: Fix checks for tx runtime PM state
- Re: [PATCH v4 5/5] drivers/tty/serial: add ESP32S3 ACM device driver
- Re: [PATCH v3 2/2] mcb: use short version for function pointer for mcb_free_bus
- From: Rodríguez Barbarin, José Javier
- [PATCH] serial: add PORT_ANY definition
- Re: [PATCH] Test for riscv fixes
- Re: [PATCH v4 5/5] drivers/tty/serial: add ESP32S3 ACM device driver
- [PATCH v3 4/4] clk: renesas: add minimal boot support for RZ/G3S SoC
- [PATCH v3 1/4] dt-bindings: serial: renesas,scif: document r9a08g045 support
- [PATCH v3 3/4] clk: renesas: rzg2l: add a divider clock for RZ/G3S
- [PATCH v3 2/4] clk: renesas: rzg2l: refactor sd mux driver
- [PATCH v3 0/4] Add new Renesas RZ/G3S SoC and RZ/G3S SMARC EVK
- Re: [PATCH v4 5/5] drivers/tty/serial: add ESP32S3 ACM device driver
- Re: [PATCH v4 5/5] drivers/tty/serial: add ESP32S3 ACM device driver
- Re: [PATCH] serial: core: Fix checks for tx runtime PM state
- Re: [PATCH] serial: core: Fix checks for tx runtime PM state
- Re: [PATCH] serial: core: Fix checks for tx runtime PM state
- Re: [PATCH] serial: core: Fix checks for tx runtime PM state
- [tty:tty-testing] BUILD SUCCESS 8d1b43f6a6df7bcea20982ad376a000d90906b42
- Re: [PATCH] serial: core: Fix checks for tx runtime PM state
- Re: [PATCH v4 5/5] drivers/tty/serial: add ESP32S3 ACM device driver
- Re: [PATCH v4 5/5] drivers/tty/serial: add ESP32S3 ACM device driver
- Re: stack leak via uart_get_info() ?
- Re: stack leak via uart_get_info() ?
- Re: [PATCH v2 1/1] serial: 8250_bcm7271: Use devm_clk_get_optional_enabled()
- Re: [PATCH v2 3/4] trigger: ledtrig-tty: move variable definition to the top
- stack leak via uart_get_info() ?
- Re: [PATCH v2 18/28] pinctrl: renesas: rzg2l: add support for different ds values on different groups
- Re: [PATCH v2 10/28] clk: renesas: rzg2l: refactor sd mux driver
- Re: [PATCH 1/1] tty: n_gsm: Avoid sleeping during .write() whilst atomic
- Re: [PATCH v2 1/1] serial: 8250_bcm7271: Use devm_clk_get_optional_enabled()
- Re: [PATCH 1/1] tty: n_gsm: Avoid sleeping during .write() whilst atomic
- [PATCH 1/2] tty: vt: make vtconsole_class constant
- Re: [PATCH v2 1/1] serial: 8250_bcm7271: Use devm_clk_get_optional_enabled()
- Re: [PATCH] serial: imx: fix tx statemachine deadlock
- [PATCH 2/2] tty: vc_screen: make vc_class constant
- Re: [PATCH 1/1] tty: n_gsm: Avoid sleeping during .write() whilst atomic
- Re: [PATCH v2 3/4] trigger: ledtrig-tty: move variable definition to the top
- Re: [PATCH 1/1] tty: n_gsm: Avoid sleeping during .write() whilst atomic
- Re: [PATCH v3 2/2] mcb: use short version for function pointer for mcb_free_bus
- From: gregkh@xxxxxxxxxxxxxxxxxxx
- Re: [PATCH v2 3/4] trigger: ledtrig-tty: move variable definition to the top
- RE: [PATCH 1/1] tty: n_gsm: Avoid sleeping during .write() whilst atomic
- Re: [PATCH 1/1] tty: n_gsm: Avoid sleeping during .write() whilst atomic
- Re: [PATCH 1/1] tty: n_gsm: Avoid sleeping during .write() whilst atomic
- Re: [PATCH 1/1] tty: n_gsm: Avoid sleeping during .write() whilst atomic
- Re: [PATCH 1/1] tty: n_gsm: Avoid sleeping during .write() whilst atomic
- Re: [PATCH 1/1] tty: n_gsm: Avoid sleeping during .write() whilst atomic
- Re: [PATCH 1/1] tty: n_gsm: Avoid sleeping during .write() whilst atomic
- Re: [PATCH v2 3/4] trigger: ledtrig-tty: move variable definition to the top
- [PATCH] serial: core: Fix checks for tx runtime PM state
- [PATCH v2 1/1] serial: 8250_bcm7271: Use devm_clk_get_optional_enabled()
- Re: [PATCH 1/1] tty: n_gsm: Avoid sleeping during .write() whilst atomic
- Re: [PATCH v2 1/1] serial: 8250_omap: Drop pm_runtime_irq_safe()
- Re: [PATCH] serial: 8250: Check for valid console index
- Re: [PATCH] serial: core: Fix checks for tx runtime PM state
- [PATCH 1/2] dt-bindings: serial: fix regex pattern for matching serial node children
- From: Krzysztof Kozlowski
- Re: [PATCH v2 11/28] clk: renesas: rzg2l: add a divider clock for RZ/G3S
- Re: [PATCH v2 18/28] pinctrl: renesas: rzg2l: add support for different ds values on different groups
- [PATCH 2/2] dt-bindings: serial: allow naming of Bluetooth with GPS children
- From: Krzysztof Kozlowski
- Re: [PATCH v3] arch/x86: port I/O tracing on x86
- Re: [PATCH v3] arch/x86: port I/O tracing on x86
- [PATCH v2 87/89] fs: rename inode i_atime and i_mtime fields
- [PATCH v2 88/89] fs: switch timespec64 fields in inode to discrete integers
- [PATCH v2 89/89] fs: move i_generation into new hole created after timestamp conversion
- [PATCH v2 11/89] tty: convert to new timestamp accessors
- [PATCH v2 02/89] fs: convert core infrastructure to new timestamp accessors
- [PATCH v2 01/89] fs: new accessor methods for atime and mtime
- [PATCH v2 00/89] fs: new accessor methods for inode atime and mtime
- Re: [PATCH v12 1/1] serial: core: Start managing serial controllers to enable runtime PM
- Re: [PATCH v2 28/28] arm64: defconfig: enable RZ/G3S (R9A08G045) SoC
- Re: [PATCH v2 27/28] arm64: dts: renesas: r9a08g045s33-smarc: add initial device tree for RZ/G3S SMARC EVK board
- Re: [PATCH v2 26/28] dt-bindings: arm: renesas: document SMARC Carrier-II EVK
- Re: [PATCH v2 25/28] arm64: dts: renesas: rzg3s-smarc: add initial device tree for RZ SMARC Carrier-II Board
- Re: [PATCH] docs: move powerpc under arch
- Re: [PATCH v2 24/28] arm64: dts: renesas: rzg3l-smarc-som: add initial support for RZ/G3S SMARC SoM
- Re: [PATCH v2 22/28] arm64: dts: renesas: add initial DTSI for RZ/G3S SoC
- Re: [PATCH v2 23/28] dt-bindings: arm: renesas: document RZ/G3S SMARC SoM
- Re: [PATCH v2 21/28] pinctrl: renesas: rzg2l: add support for RZ/G3S SoC
- Re: [PATCH v2 20/28] dt-bindings: pinctrl: renesas: document RZ/G3S SoC
- Re: [PATCH v2 17/28] pinctrl: renesas: rzg2l: move ds and oi to SoC specific configuration
- Re: [PATCH v2 18/28] pinctrl: renesas: rzg2l: add support for different ds values on different groups
- Re: [PATCH 1/1] tty: n_gsm: Avoid sleeping during .write() whilst atomic
- Re: [PATCH 1/1] tty: n_gsm: Avoid sleeping during .write() whilst atomic
- Re: [PATCH v2 16/28] pinctrl: renesas: rzg2l: adapt function number for RZ/G3S
- Re: [PATCH 1/1] tty: n_gsm: Avoid sleeping during .write() whilst atomic
- Re: [PATCH v2 15/28] pinctrl: renesas: rzg2l: adapt for different SD/PWPR register offsets
- Re: [PATCH 1/1] tty: n_gsm: Avoid sleeping during .write() whilst atomic
- Re: [PATCH v2 14/28] pinctrl: renesas: rzg2l: index all registers based on port offset
- Re: [PATCH v2 13/28] clk: renesas: add minimal boot support for RZ/G3S SoC
- Re: [PATCH v2 12/28] dt-bindings: clock: renesas,rzg2l-cpg: document RZ/G3S SoC
- Re: [PATCH v2 11/28] clk: renesas: rzg2l: add a divider clock for RZ/G3S
- Re: [PATCH 1/1] tty: n_gsm: Avoid sleeping during .write() whilst atomic
- Re: [PATCH 1/1] tty: n_gsm: Avoid sleeping during .write() whilst atomic
- Re: [PATCH] serial: imx: fix tx statemachine deadlock
- Re: [PATCH v2 10/28] clk: renesas: rzg2l: refactor sd mux driver
- Re: [PATCH] serial: imx: fix tx statemachine deadlock
- Re: [PATCH v12 1/1] serial: core: Start managing serial controllers to enable runtime PM
- [PATCH] serial: imx: fix tx statemachine deadlock
- Re: [PATCH 1/1] tty: n_gsm: Avoid sleeping during .write() whilst atomic
- Re: [PATCH] serial: 8250: Check for valid console index
- Re: [PATCH v12 1/1] serial: core: Start managing serial controllers to enable runtime PM
- Re: [PATCH] serial: 8250: Check for valid console index
- Re: [PATCH 1/1] tty: n_gsm: Avoid sleeping during .write() whilst atomic
- Re: [PATCH] serial: 8250: Check for valid console index
- Re: [PATCH] serial: 8250: Check for valid console index
- Re: [PATCH v12 1/1] serial: core: Start managing serial controllers to enable runtime PM
- RE: [PATCH 1/1] tty: n_gsm: Avoid sleeping during .write() whilst atomic
- Re: [PATCH 1/1] tty: n_gsm: Avoid sleeping during .write() whilst atomic
- [PATCH] serial: 8250: Check for valid console index
- Re: [PATCH v2 09/28] clk: renesas: rzg2l: remove CPG_SDHI_DSEL from generic header
- Re: [PATCH v2 08/28] clk: renesas: rzg2l: add struct clk_hw_data
- Re: [PATCH v2 07/28] clk: renesas: rzg2l: add support for RZ/G3S PLL
- Re: [PATCH v2 3/4] trigger: ledtrig-tty: move variable definition to the top
- Re: [PATCH 1/1] tty: n_gsm: Avoid sleeping during .write() whilst atomic
- Re: [PATCH v2 3/4] trigger: ledtrig-tty: move variable definition to the top
- Re: [PATCH v2 3/4] trigger: ledtrig-tty: move variable definition to the top
- Re: [PATCH v2 06/28] clk: renesas: rzg2l: remove critical area
- Re: [PATCH v2 05/28] clk: renesas: rzg2l: fix computation formula
- Re: [PATCH v12 1/1] serial: core: Start managing serial controllers to enable runtime PM
- Re: [PATCH v12 1/1] serial: core: Start managing serial controllers to enable runtime PM
- Re: [PATCH v2 3/4] trigger: ledtrig-tty: move variable definition to the top
- [PATCH v2 1/1] serial: 8250_omap: Drop pm_runtime_irq_safe()
- Re: [PATCH v12 1/1] serial: core: Start managing serial controllers to enable runtime PM
- Re: [PATCH 1/1] tty: n_gsm: Avoid sleeping during .write() whilst atomic
- Re: [PATCH 1/1] tty: n_gsm: Avoid sleeping during .write() whilst atomic
- RE: [PATCH 1/1] tty: n_gsm: Avoid sleeping during .write() whilst atomic
- Re: [PATCH] docs: move powerpc under arch
- [tty:tty-linus] BUILD SUCCESS 560706eff7c8e5621b0d63afe0866e0e1906e87e
- [tty:tty-testing] BUILD SUCCESS 0d447e927ee86e9ff89010085a47a275c2bb5594
- Re: [PATCH v12 1/1] serial: core: Start managing serial controllers to enable runtime PM
- Re: [PATCH v4 5/5] drivers/tty/serial: add ESP32S3 ACM device driver
- Re: [PATCH 1/1] tty: n_gsm: Avoid sleeping during .write() whilst atomic
- Re: [PATCH 1/1] tty: n_gsm: Avoid sleeping during .write() whilst atomic
- [PATCH 1/1] tty: n_gsm: Avoid sleeping during .write() whilst atomic
- Re: [PATCH] docs: move powerpc under arch
- Re: [PATCH v2 04/28] clk: renesas: rzg2l: trust value returned by hardware
- Re: [PATCH v2 03/28] clk: renesas: rzg2l: lock around writes to mux register
- Re: [PATCH v2 02/28] clk: renesas: rzg2l: wait for status bit of SD mux before continuing
- Re: [PATCH v1 1/1] serial: 8250_bcm7271: Use devm_clk_get_optional_enabled()
- [PATCH v1 1/1] serial: 8250_bcm7271: Use devm_clk_get_optional_enabled()
- [PATCH v1 1/1] serial: core: Simplify uart_get_rs485_mode()
- Re: [PATCH v4 3/5] drivers/tty/serial: add driver for the ESP32 UART
- Re: [PATCH v4 5/5] drivers/tty/serial: add ESP32S3 ACM device driver
- Re: [PATCH v3] arch/x86: port I/O tracing on x86
- Re: [PATCH v4 1/5] serial: core: tidy invalid baudrate handling in uart_get_baud_rate
- Re: [PATCH v12 1/1] serial: core: Start managing serial controllers to enable runtime PM
- Re: [PATCH v12 1/1] serial: core: Start managing serial controllers to enable runtime PM
- Re: [PATCH v12 1/1] serial: core: Start managing serial controllers to enable runtime PM
- Re: [PATCH 4/4] tty: serial: 8250: Add support for MOXA PCIe boards to switch interface between RS422/RS485
- Re: [PATCH 1/4] tty: serial: 8250: Cleanup MOXA configurations in 8250_pci.c
- Re: [PATCH v2 00/15] sysctl: Remove sentinel elements from drivers
- Re: [PATCH 3/4] tty: serial: 8250: Fix MOXA RS422/RS485 PCIe boards not work by default
- Re: [PATCH 2/4] tty: serial: 8250: Add support for MOXA Mini PCIe boards
- Re: [PATCH v5 03/11] dt-bindings: bus: document RIFSC
- Re: [PATCH v5 01/11] dt-bindings: document generic access controller
- Re: [PATCH 1/4] tty: serial: 8250: Cleanup MOXA configurations in 8250_pci.c
- Re: [PATCH 1/4] tty: serial: 8250: Cleanup MOXA configurations in 8250_pci.c
- Re: [PATCH v2 3/4] trigger: ledtrig-tty: move variable definition to the top
- Re: [PATCH v2 19/28] dt-bindings: pinctrl: renesas: set additionalProperties: false
- Re: [PATCH v2 1/1] serial: 8250_bcm7271: Use dev_err_probe() instead of dev_err()
- Re: [PATCH v2 01/15] cdrom: Remove now superfluous sentinel element from ctl_table array
- [tty:tty-testing] BUILD SUCCESS 45a1c8dfa28a0b8b6954d5905bee04877d2ad548
- Re: [PATCH v2 19/28] dt-bindings: pinctrl: renesas: set additionalProperties: false
- Re: [PATCH v2 11/15] sgi-xp: Remove the now superfluous sentinel element from ctl_table array
- Re: [PATCH v2 10/15] vrf: Remove the now superfluous sentinel element from ctl_table array
- Re: [PATCH v2 3/4] trigger: ledtrig-tty: move variable definition to the top
- Re: [PATCH] Test for riscv fixes
[Index of Archives]
[Kernel Announce]
[IETF Annouce]
[Security]
[Netfilter]
[Bugtraq]
[Linux Kernel for ARM]