Linux Serial

• Thread Index

• Re: [PATCH v4 06/11] tty: 8250: Fix port count of PX-257
  • From: Cameron Williams
• Re: [PATCH v6 tty-next 2/2] serial: 8250: add driver for NI UARTs
  • From: Ilpo Järvinen
• Re: [PATCH v4 06/11] tty: 8250: Fix port count of PX-257
  • From: Greg Kroah-Hartman
• Re: [PATCH v4 05/11] tty: 8250: Add support for Intashield IS-100
  • From: Greg KH
• Re: [PATCH v4 06/11] tty: 8250: Fix port count of PX-257
  • From: Ilpo Järvinen
• Re: [PATCH v4 05/11] tty: 8250: Add support for Intashield IS-100
  • From: Ilpo Järvinen
• Re: [PATCH v5] arch/x86: port I/O tracing on x86
  • From: Greg KH
• Re: [PATCH v2 1/1] tty: i3c: add TTY over I3C master support
  • From: Greg KH
• Re: [PATCH v3 6/6] tty: serial: 8250: Add support for MOXA PCIe boards to switch interface between RS422/RS485
  • From: Greg Kroah-Hartman
• Re: [PATCH v3 6/6] tty: serial: 8250: Add support for MOXA PCIe boards to switch interface between RS422/RS485
  • From: Crescent CY Hsieh
• Re: [PATCH v6 tty-next 2/2] serial: 8250: add driver for NI UARTs
  • From: Jiri Slaby
• Re: [tty:tty-next 17/49] arch/mips/sibyte/swarm/setup.c:146:9: error: implicit declaration of function 'vgacon_register_screen'
  • From: Arnd Bergmann
• Re: [PATCH] serial: 8250_omap: Set the console genpd always on if no console suspend
  • From: Tony Lindgren
• Re: [PATCH v5] arch/x86: port I/O tracing on x86
  • From: Steven Rostedt
• Re: [PATCH] serial: 8250_omap: Set the console genpd always on if no console suspend
  • From: Kevin Hilman
• Re: [PATCH v5] arch/x86: port I/O tracing on x86
  • From: Dan Raymond
• [PATCH v6 tty-next 2/2] serial: 8250: add driver for NI UARTs
  • From: Brenda Streiff
• [PATCH v6 tty-next 1/2] dt-bindings: serial: ni,ni16650: add bindings
  • From: Brenda Streiff
• [PATCH v6 tty-next 0/2] serial: Add driver for National Instruments UARTs
  • From: Brenda Streiff
• Re: [PATCH v5] arch/x86: port I/O tracing on x86
  • From: Dan Raymond
• [tty:tty-next 17/49] arch/mips/sibyte/swarm/setup.c:146:9: error: implicit declaration of function 'vgacon_register_screen'
  • From: kernel test robot
• Re: [PATCH v2 1/1] tty: i3c: add TTY over I3C master support
  • From: Frank Li
• Re: [PATCH v5 2/2] leds: ledtrig-tty: add new line mode evaluation
  • From: Florian Eckert
• Re: [PATCH v5 2/2] leds: ledtrig-tty: add new line mode evaluation
  • From: Greg KH
• Re: [PATCH v5 2/2] leds: ledtrig-tty: add new line mode evaluation
  • From: Florian Eckert
• Re: [PATCH v5 2/2] leds: ledtrig-tty: add new line mode evaluation
  • From: Greg KH
• Re: [PATCH v5 2/2] leds: ledtrig-tty: add new line mode evaluation
  • From: Florian Eckert
• Re: [PATCH v5 1/2] tty: add new helper function tty_get_tiocm
  • From: Greg KH
• Re: [PATCH v5 2/2] leds: ledtrig-tty: add new line mode evaluation
  • From: Greg KH
• [PATCH v5 1/2] tty: add new helper function tty_get_tiocm
  • From: Florian Eckert
• [PATCH v5 0/2] ledtrig-tty: add additional tty state evaluation
  • From: Florian Eckert
• [PATCH v5 2/2] leds: ledtrig-tty: add new line mode evaluation
  • From: Florian Eckert
• Re: [PATCH] serial: core: Fix runtime PM handling for pending tx
  • From: Richard Purdie
• Re: [PATCH v3 6/6] tty: serial: 8250: Add support for MOXA PCIe boards to switch interface between RS422/RS485
  • From: Ilpo Järvinen
• Re: [PATCH v3 5/6] tty: serial: 8250: Fix MOXA RS422/RS485 PCIe boards not work by default
  • From: Ilpo Järvinen
• Re: [PATCH v2 3/3] hvc/xen: fix console unplug
  • From: Juergen Gross
• [PATCH] serial: core: Fix runtime PM handling for pending tx
  • From: Tony Lindgren
• Re: [PATCH] serial: 8250_omap: Set the console genpd always on if no console suspend
  • From: Tony Lindgren
• [tty:tty-testing] BUILD SUCCESS 936323f8de4139c9f6ebc0d08e20f1fe200b78a8
  • From: kernel test robot
• Re: [PATCH 3/5] i3c: slave: add svc slave controller support
  • From: kernel test robot
• Re: [PATCH 1/5] i3c: add slave mode support
  • From: kernel test robot
• Re: [PATCH 1/5] i3c: add slave mode support
  • From: kernel test robot
• Re: [PATCH v4 3/3] leds: ledtrig-tty: add new line mode evaluation
  • From: Greg KH
• Re: [PATCH v4 1/3] tty: whitespaces in descriptions corrected by replacing tabs with spaces
  • From: Greg KH
• Re: [PATCH v4 1/3] tty: whitespaces in descriptions corrected by replacing tabs with spaces
  • From: Florian Eckert
• Re: [PATCH v4 2/3] tty: add new helper function tty_get_tiocm
  • From: Florian Eckert
• Re: [PATCH v4 3/3] leds: ledtrig-tty: add new line mode evaluation
  • From: Florian Eckert
• Re: [PATCH v5] arch/x86: port I/O tracing on x86
  • From: Steven Rostedt
• Re: [PATCH v2 1/1] tty: i3c: add TTY over I3C master support
  • From: Greg KH
• Re: [PATCH v3 8/9] tty: Add SBI debug console support to HVC SBI driver
  • From: Greg Kroah-Hartman
• Re: [PATCH v3 7/9] tty/serial: Add RISC-V SBI debug console based earlycon
  • From: Greg Kroah-Hartman
• Re: [PATCH v3 6/9] RISC-V: Add stubs for sbi_console_putchar/getchar()
  • From: Greg Kroah-Hartman
• Re: [PATCH v2 1/3] hvc/xen: fix event channel handling for secondary consoles
  • From: Greg Kroah-Hartman
• Re: [PATCH v3 0/6] tty: serial: 8250: Changes of MOXA PCIe boards in 8250_pci.c
  • From: Greg Kroah-Hartman
• Re: [PATCH v4 1/3] tty: whitespaces in descriptions corrected by replacing tabs with spaces
  • From: Greg KH
• Re: [PATCH v4 01/11] tty: 8250: Fix IS-200 PCI ID comment
  • From: Greg KH
• Re: [PATCH] serial: atmel: Check return value of platform_get_irq() in atmel_init_port()
  • From: Greg KH
• Re: [PATCH v4 2/3] tty: add new helper function tty_get_tiocm
  • From: Greg KH
• Re: [PATCH v4 1/3] tty: whitespaces in descriptions corrected by replacing tabs with spaces
  • From: Greg KH
• Re: [PATCH v4 3/3] leds: ledtrig-tty: add new line mode evaluation
  • From: Greg KH
• Re: [PATCH v5] arch/x86: port I/O tracing on x86
  • From: Greg KH
• Re: [PATCH v3 16/20] tty: serial: samsung: Add gs101 compatible and SoC data
  • From: Peter Griffin
• [PATCH v2 1/3] hvc/xen: fix event channel handling for secondary consoles
  • From: David Woodhouse
• [PATCH v2 0/3] hvc/xen: Xen console fixes.
  • From: David Woodhouse
• [PATCH v2 3/3] hvc/xen: fix console unplug
  • From: David Woodhouse
• [PATCH v2 2/3] hvc/xen: fix error path in xen_hvc_init() to always register frontend driver
  • From: David Woodhouse
• [PATCH v4 08/11] tty: 8250: Add note for PX-835
  • From: Cameron Williams
• [PATCH v4 09/11] tty: 8250: Add support for additional Brainboxes PX cards
  • From: Cameron Williams
• [PATCH v4 11/11] tty: 8250: Add Brainboxes Oxford Semiconductor-based quirks
  • From: Cameron Williams
• [PATCH v4 03/11] tty: 8250: Add support for additional Brainboxes UC cards
  • From: Cameron Williams
• [PATCH v4 07/11] tty: 8250: Fix up PX-803/PX-857
  • From: Cameron Williams
• [PATCH v4 06/11] tty: 8250: Fix port count of PX-257
  • From: Cameron Williams
• [PATCH v4 05/11] tty: 8250: Add support for Intashield IS-100
  • From: Cameron Williams
• [PATCH v4 04/11] tty: 8250: Add support for Brainboxes UP cards
  • From: Cameron Williams
• [PATCH v4 10/11] tty: 8250: Add support for Intashield IX cards
  • From: Cameron Williams
• [PATCH v4 02/11] tty: 8250: Remove UC-257 and UC-431
  • From: Cameron Williams
• [PATCH v4 01/11] tty: 8250: Fix IS-200 PCI ID comment
  • From: Cameron Williams
• [PATCH v4 00/11] tty: 8250: Brainboxes card additions/fixes
  • From: Cameron Williams
• [PATCH v2 1/1] tty: i3c: add TTY over I3C master support
  • From: Frank Li
• Re: [PATCH] hvc/xen: fix event channel handling for secondary consoles
  • From: David Woodhouse
• Re: [PATCH v3 13/20] pinctrl: samsung: Add filter selection support for alive banks
  • From: Peter Griffin
• Re: [PATCH v3 8/9] tty: Add SBI debug console support to HVC SBI driver
  • From: Anup Patel
• Re: [PATCH 1/1] tty: i3c: add tty over i3c master support
  • From: kernel test robot
• Re: [PATCH v3 0/9] RISC-V SBI debug console extension support
  • From: Anup Patel
• Re: [PATCH v3 8/9] tty: Add SBI debug console support to HVC SBI driver
  • From: Andrew Jones
• Re: [PATCH v3 8/9] tty: Add SBI debug console support to HVC SBI driver
  • From: Anup Patel
• Re: [PATCH v3 8/9] tty: Add SBI debug console support to HVC SBI driver
  • From: Björn Töpel
• Re: [PATCH] hvc/xen: fix event channel handling for secondary consoles
  • From: Juergen Gross
• Re: [PATCH v3 5/9] KVM: riscv: selftests: Add SBI DBCN extension to get-reg-list test
  • From: Andrew Jones
• Re: [PATCH v3 3/9] RISC-V: KVM: Allow some SBI extensions to be disabled by default
  • From: Andrew Jones
• [PATCH v3 9/9] RISC-V: Enable SBI based earlycon support
  • From: Anup Patel
• [PATCH v3 8/9] tty: Add SBI debug console support to HVC SBI driver
  • From: Anup Patel
• [PATCH v3 7/9] tty/serial: Add RISC-V SBI debug console based earlycon
  • From: Anup Patel
• [PATCH v3 6/9] RISC-V: Add stubs for sbi_console_putchar/getchar()
  • From: Anup Patel
• [PATCH v3 5/9] KVM: riscv: selftests: Add SBI DBCN extension to get-reg-list test
  • From: Anup Patel
• [PATCH v3 4/9] RISC-V: KVM: Forward SBI DBCN extension to user-space
  • From: Anup Patel
• [PATCH v3 3/9] RISC-V: KVM: Allow some SBI extensions to be disabled by default
  • From: Anup Patel
• [PATCH v3 2/9] RISC-V: KVM: Change the SBI specification version to v2.0
  • From: Anup Patel
• [PATCH v3 1/9] RISC-V: Add defines for SBI debug console extension
  • From: Anup Patel
• [PATCH v3 0/9] RISC-V SBI debug console extension support
  • From: Anup Patel
• Re: [PATCH] dt-bindings: serial: rs485: Add rs485-rts-active-high
  • From: Krzysztof Kozlowski
• Re: [PATCH v2 3/8] RISC-V: KVM: Allow some SBI extensions to be disabled by default
  • From: Anup Patel
• Re: [PATCH 1/1] tty: i3c: add tty over i3c master support
  • From: Frank Li
• Re: [PATCH v2] dt-bindings: serial: 8250_omap: add rs485-rts-active-high
  • From: Rob Herring
• Re: [PATCH 1/5] i3c: add slave mode support
  • From: Greg KH
• [PATCH] dt-bindings: serial: rs485: Add rs485-rts-active-high
  • From: Francesco Dolcini
• Re: [PATCH 1/5] i3c: add slave mode support
  • From: Greg KH
• Re: [PATCH 1/1] tty: i3c: add tty over i3c master support
  • From: Greg Kroah-Hartman
• Re: [PATCH v2] dt-bindings: serial: 8250_omap: add rs485-rts-active-high
  • From: Francesco Dolcini
• Re: [PATCH v2] dt-bindings: serial: 8250_omap: add rs485-rts-active-high
  • From: Francesco Dolcini
• Re: [PATCH v2] dt-bindings: serial: 8250_omap: add rs485-rts-active-high
  • From: Geert Uytterhoeven
• Re: [PATCH 1/5] i3c: add slave mode support
  • From: Frank Li
• Re: [PATCH 1/1] tty: i3c: add tty over i3c master support
  • From: Frank Li
• Re: [PATCH 2/2] dt-bindings: serial: drop unsupported samsung bindings
  • From: Sam Protsenko
• Re: [PATCH 1/2] tty: serial: samsung: drop earlycon support for unsupported platforms
  • From: Sam Protsenko
• Re: [PATCH v2] tty: serial: samsung_tty: remove dead code
  • From: Sam Protsenko
• Re: [PATCH v3 03/20] dt-bindings: soc: google: exynos-sysreg: add dedicated SYSREG compatibles to GS101
  • From: Peter Griffin
• Re: Kernel 6.5 ttyS1 hang with qemu (was Re: [OE-core] Summary of the remaining 6.5 kernel serial issue (and 6.5 summary)
  • From: Richard Purdie
• Re: [PATCH 2/2] dt-bindings: serial: drop unsupported samsung bindings
  • From: Krzysztof Kozlowski
• Re: [PATCH 1/2] tty: serial: samsung: drop earlycon support for unsupported platforms
  • From: Krzysztof Kozlowski
• Re: [PATCH 2/5] dt-bindings: i3c: svc: add compatible string i3c: silvaco,i3c-slave
  • From: Rob Herring
• [PATCH v4 3/3] leds: ledtrig-tty: add new line mode evaluation
  • From: Florian Eckert
• [PATCH v4 1/3] tty: whitespaces in descriptions corrected by replacing tabs with spaces
  • From: Florian Eckert
• [PATCH v4 2/3] tty: add new helper function tty_get_tiocm
  • From: Florian Eckert
• [PATCH v4 0/3] ledtrig-tty: add additional tty state evaluation
  • From: Florian Eckert
• Re: [PATCH v2] dt-bindings: serial: 8250_omap: add rs485-rts-active-high
  • From: Geert Uytterhoeven
• [PATCH v2] tty: serial: samsung_tty: remove dead code
  • From: André Draszik
• [PATCH 2/2] dt-bindings: serial: drop unsupported samsung bindings
  • From: André Draszik
• [PATCH 1/2] tty: serial: samsung: drop earlycon support for unsupported platforms
  • From: André Draszik
• Re: [PATCH v2 4/8] RISC-V: KVM: Forward SBI DBCN extension to user-space
  • From: Andrew Jones
• Re: [PATCH v3 3/4] trigger: ledtrig-tty: move variable definition to the top
  • From: m . brock
• Re: [PATCH v2 0/6] remove AR7 platform and associated drivers
  • From: Thomas Bogendoerfer
• Re: [PATCH v2 8/8] RISC-V: Enable SBI based earlycon support
  • From: Andrew Jones
• Re: [PATCH v2 6/8] tty/serial: Add RISC-V SBI debug console based earlycon
  • From: Andrew Jones
• Re: [PATCH v2 5/8] RISC-V: Add inline version of sbi_console_putchar/getchar() functions
  • From: Andrew Jones
• Re: [PATCH v2 4/8] RISC-V: KVM: Forward SBI DBCN extension to user-space
  • From: Andrew Jones
• Re: [PATCH v2 3/8] RISC-V: KVM: Allow some SBI extensions to be disabled by default
  • From: Andrew Jones
• Re: [PATCH v2 2/8] RISC-V: KVM: Change the SBI specification version to v2.0
  • From: Andrew Jones
• Re: [PATCH v2 1/8] RISC-V: Add defines for SBI debug console extension
  • From: Andrew Jones
• Re: [PATCH 4/5] i3c: slave: func: add tty driver
  • From: Jiri Slaby
• Re: [PATCH 1/1] tty: i3c: add tty over i3c master support
  • From: Jiri Slaby
• Re: [PATCH 2/5] dt-bindings: i3c: svc: add compatible string i3c: silvaco,i3c-slave
  • From: Krzysztof Kozlowski
• Re: [PATCH 1/5] i3c: add slave mode support
  • From: Krzysztof Kozlowski
• Re: [PATCH v3 6/6] tty: serial: 8250: Add support for MOXA PCIe boards to switch interface between RS422/RS485
  • From: Jiri Slaby
• Re: [PATCH v3 5/6] tty: serial: 8250: Fix MOXA RS422/RS485 PCIe boards not work by default
  • From: Jiri Slaby
• Re: [PATCH v3 6/6] tty: serial: 8250: Add support for MOXA PCIe boards to switch interface between RS422/RS485
  • From: Jiri Slaby
• Re: [PATCH v3 5/6] tty: serial: 8250: Fix MOXA RS422/RS485 PCIe boards not work by default
  • From: Jiri Slaby
• Re: [PATCH] serial: st-asc: Check return value of platform_get_irq() in asc_init_port()
  • From: Jiri Slaby
• [tty:tty-testing] BUILD SUCCESS 0059bc9a29e02853dbbaa0f6d0635a687c8b9835
  • From: kernel test robot
• Re: [PATCH 5/5] Documentation: i3c: Add I3C slave mode controller and function
  • From: Frank Li
• [PATCH 5/5] Documentation: i3c: Add I3C slave mode controller and function
  • From: Frank Li
• [PATCH 2/5] dt-bindings: i3c: svc: add compatible string i3c: silvaco,i3c-slave
  • From: Frank Li
• [PATCH 4/5] i3c: slave: func: add tty driver
  • From: Frank Li
• [PATCH 3/5] i3c: slave: add svc slave controller support
  • From: Frank Li
• [PATCH 1/5] i3c: add slave mode support
  • From: Frank Li
• [PATCH 0/5] I3C slave mode support
  • From: Frank Li
• [PATCH 1/1] tty: i3c: add tty over i3c master support
  • From: Frank Li
• Re: [PATCH] tty: serial: samsung_tty: remove dead code
  • From: Krzysztof Kozlowski
• Re: [PATCH] tty: serial: samsung_tty: remove dead code
  • From: Krzysztof Kozlowski
• [PATCH] serial/esp32_uart: use prescaler when available
  • From: Max Filippov
• Re: [PATCH] serial: st-asc: Check return value of platform_get_irq() in asc_init_port()
  • From: Hugo Villeneuve
• Re: [PATCH] serial: st-asc: Check return value of platform_get_irq() in asc_init_port()
  • From: Hugo Villeneuve
• [PATCH v4 7/7] serial: 8250_exar: Set missing rs485_supported flag
  • From: Lino Sanfilippo
• [PATCH v4 6/7] serial: omap: do not override settings for RS485 support
  • From: Lino Sanfilippo
• [PATCH v4 5/7] serial: core, imx: do not set RS485 enabled if it is not supported
  • From: Lino Sanfilippo
• [PATCH v4 3/7] serial: core: fix sanitizing check for RTS settings
  • From: Lino Sanfilippo
• [PATCH v4 4/7] serial: core: make sure RS485 cannot be enabled when it is not supported
  • From: Lino Sanfilippo
• [PATCH v4 2/7] serial: core: set missing supported flag for RX during TX GPIO
  • From: Lino Sanfilippo
• [PATCH v4 1/7] serial: Do not hold the port lock when setting rx-during-tx GPIO
  • From: Lino Sanfilippo
• [PATCH v4 0/7] Fixes and improvements for RS485
  • From: Lino Sanfilippo
• Re: [PATCH 2/3] serial: core: Make local variable size to u64
  • From: VAMSHI GAJJELA
• Re: [PATCH v2 1/3] serial: core: Potential overflow of frame_time
  • From: VAMSHI GAJJELA
• Re: [PATCH 1/3] serial: core: Potential overflow of frame_time
  • From: VAMSHI GAJJELA
• Re: [PATCH v3 1/4] tty: whitespaces in descriptions corrected by replacing tabs with spaces.
  • From: Greg KH
• Re: [PATCH v3 1/4] tty: whitespaces in descriptions corrected by replacing tabs with spaces.
  • From: Florian Eckert
• [PATCH] tty: serial: samsung_tty: remove dead code
  • From: André Draszik
• [PATCH v3 6/6] tty: serial: 8250: Add support for MOXA PCIe boards to switch interface between RS422/RS485
  • From: Crescent CY Hsieh
• [PATCH v3 5/6] tty: serial: 8250: Fix MOXA RS422/RS485 PCIe boards not work by default
  • From: Crescent CY Hsieh
• [PATCH v3 1/6] tty: serial: 8250: Modify MOXA enum name within 8250_pci.c
  • From: Crescent CY Hsieh
• [PATCH v3 3/6] tty: serial: 8250: Relocate macros within 8250_pci.c
  • From: Crescent CY Hsieh
• [PATCH v3 4/6] tty: serial: 8250: Add support for MOXA Mini PCIe boards
  • From: Crescent CY Hsieh
• [PATCH v3 0/6] tty: serial: 8250: Changes of MOXA PCIe boards in 8250_pci.c
  • From: Crescent CY Hsieh
• [PATCH v3 2/6] tty: serial: 8250: Cleanup MOXA configurations
  • From: Crescent CY Hsieh
• [PATCH] serial: atmel: Check return value of platform_get_irq() in atmel_init_port()
  • From: Yi Yang
• [PATCH] serial: st-asc: Check return value of platform_get_irq() in asc_init_port()
  • From: Yi Yang
• Re: Kernel 6.5 ttyS1 hang with qemu (was Re: [OE-core] Summary of the remaining 6.5 kernel serial issue (and 6.5 summary)
  • From: Tony Lindgren
• Re: [PATCH] serial: core: Fix checks for tx runtime PM state
  • From: Tony Lindgren
• Re: [PATCH V2 2/2] tty: serial: uartps: Add rs485 support to uartps driver
  • From: Lino Sanfilippo
• [PATCH] hvc/xen: fix event channel handling for secondary consoles
  • From: David Woodhouse
• Re: Kernel 6.5 ttyS1 hang with qemu (was Re: [OE-core] Summary of the remaining 6.5 kernel serial issue (and 6.5 summary)
  • From: Richard Purdie
• Re: [PATCH v3 15/20] watchdog: s3c2410_wdt: Add support for Google tensor SoCs
  • From: Peter Griffin
• Re: [PATCH v3 15/20] watchdog: s3c2410_wdt: Add support for Google tensor SoCs
  • From: Peter Griffin
• Re: [PATCH v3 09/20] clk: samsung: clk-pll: Add support for pll_{0516,0517,518}
  • From: Peter Griffin
• [PATCH] serial: 8250_omap: Set the console genpd always on if no console suspend
  • From: Thomas Richard
• RE: [PATCH V2 2/2] tty: serial: uartps: Add rs485 support to uartps driver
  • From: Guntupalli, Manikanta
• Re: [tty:tty-testing 22/24] earlycon.c:undefined reference to `screen_info'
  • From: Arnd Bergmann
• Re: [tty:tty-testing 22/24] earlycon.c:undefined reference to `screen_info'
  • From: Greg Kroah-Hartman
• Re: [tty:tty-testing 12/24] drivers/tty/serial/8250/8250_ni.c:446:41: warning: 'nic7a69' defined but not used
  • From: Greg Kroah-Hartman
• [tty:tty-next] BUILD SUCCESS fe2017ba24f318e5feef487b7552e40a3de2d50a
  • From: kernel test robot
• [tty:tty-testing] BUILD REGRESSION 6271f1e8c4cb9a46273ae01ff9cb86a022063f75
  • From: kernel test robot
• Re: [PATCH v2] dt-bindings: serial: re-order entries to match coding convention
  • From: Conor Dooley
• Re: Kernel 6.5 ttyS1 hang with qemu (was Re: [OE-core] Summary of the remaining 6.5 kernel serial issue (and 6.5 summary)
  • From: Tony Lindgren
• [tty:tty-testing 22/24] efi.c:undefined reference to `screen_info'
  • From: kernel test robot
• [tty:tty-testing 22/24] earlycon.c:undefined reference to `screen_info'
  • From: kernel test robot
• [tty:tty-testing 12/24] drivers/tty/serial/8250/8250_ni.c:446:41: warning: 'nic7a69' defined but not used
  • From: kernel test robot
• [PATCH v2] dt-bindings: serial: re-order entries to match coding convention
  • From: Krzysztof Kozlowski
• Re: [PATCH] dt-bindings: serial: re-order entries to match coding convention
  • From: Krzysztof Kozlowski
• Re: [PATCH] serial: core: Fix checks for tx runtime PM state
  • From: Johan Hovold
• Re: [PATCH 2/2] dt-bindings: serial: sc16is7xx: remove 'clock-frequency' property
  • From: Krzysztof Kozlowski
• Re: [PATCH 2/2] dt-bindings: serial: sc16is7xx: remove 'clock-frequency' property
  • From: Hugo Villeneuve
• Re: [PATCH v11 3/3] arm64: dts: mediatek: Initial mt8365-evk support
  • From: Laurent Pinchart
• Re: [PATCH v11 3/3] arm64: dts: mediatek: Initial mt8365-evk support
  • From: Laurent Pinchart
• Re: [PATCH v3 06/20] dt-bindings: pinctrl: samsung: add google,gs101-pinctrl compatible
  • From: Rob Herring
• Re: [PATCH v3 03/20] dt-bindings: soc: google: exynos-sysreg: add dedicated SYSREG compatibles to GS101
  • From: Rob Herring
• Re: [PATCH v3 3/4] trigger: ledtrig-tty: move variable definition to the top
  • From: Jiri Slaby
• Re: [PATCH v3 1/4] tty: whitespaces in descriptions corrected by replacing tabs with spaces.
  • From: Jiri Slaby
• Re: [PATCH] serial: 8250_dw: Allow TX FIFO to drain before writing to UART_LCR An issue has been observed on the Broadcom BCM56160 serial port which appears closely related to a similar issue on the Marvell Armada 38x serial port.
  • From: Ilpo Järvinen
• Re: [PATCH] serial: 8250_dw: Allow TX FIFO to drain before writing to UART_LCR An issue has been observed on the Broadcom BCM56160 serial port which appears closely related to a similar issue on the Marvell Armada 38x serial port.
  • From: Ilpo Järvinen
• Re: [PATCH v6 10/11] ARM: dts: stm32: add ETZPC as a system bus for STM32MP15x boards
  • From: Gatien CHEVALLIER
• Re: [PATCH 3/3] serial: core: Update uart_poll_timeout function to return unsigned int
  • From: Ilpo Järvinen
• Re: [PATCH 2/3] serial: core: Make local variable size to u64
  • From: Ilpo Järvinen
• Re: [PATCH v2 1/3] serial: core: Potential overflow of frame_time
  • From: Ilpo Järvinen
• Re: [PATCH v3 0/6] Fixes and improvements for RS485
  • From: Lino Sanfilippo
• Re: [PATCH v3 0/6] Fixes and improvements for RS485
  • From: Uwe Kleine-König
• Re: [PATCH 1/3] serial: core: Potential overflow of frame_time
  • From: Ilpo Järvinen
• Re: [PATCH v3 3/6] serial: core: fix sanitizing check for RTS settings
  • From: Lino Sanfilippo
• Re: [PATCH v3 3/6] serial: core: fix sanitizing check for RTS settings
  • From: Ilpo Järvinen
• Re: [PATCH] serial: amba-pl011: set fwnode from parent device
  • From: Emil Kronborg
• Re: [PATCH v3 3/4] trigger: ledtrig-tty: move variable definition to the top
  • From: Florian Eckert
• Re: Regression: serial: 8250_omap: error during suspend if no_console_suspend is set
  • From: Linux regression tracking #update (Thorsten Leemhuis)
• Re: [PATCH v3 3/4] trigger: ledtrig-tty: move variable definition to the top
  • From: m . brock
• Re: Kernel 6.5 ttyS1 hang with qemu (was Re: [OE-core] Summary of the remaining 6.5 kernel serial issue (and 6.5 summary)
  • From: Richard Purdie
• Re: Kernel 6.5 ttyS1 hang with qemu (was Re: [OE-core] Summary of the remaining 6.5 kernel serial issue (and 6.5 summary)
  • From: Mikko Rapeli
• Re: [PATCH] dt-bindings: serial: re-order entries to match coding convention
  • From: Geert Uytterhoeven
• Re: [PATCH v3 7/7] tty: 8250: Add Brainboxes Oxford Semiconductor-based quirks
  • From: Cameron Williams
• Re: [PATCH v3 2/7] tty: 8250: Add support for additional Brainboxes UC cards
  • From: Cameron Williams
• Re: [PATCH v3 1/7] tty: 8250: Fix IS-200 PCI ID comment
  • From: Cameron Williams
• Re: Kernel 6.5 ttyS1 hang with qemu (was Re: [OE-core] Summary of the remaining 6.5 kernel serial issue (and 6.5 summary)
  • From: Tony Lindgren
• Re: Kernel 6.5 ttyS1 hang with qemu (was Re: [OE-core] Summary of the remaining 6.5 kernel serial issue (and 6.5 summary)
  • From: Mikko Rapeli
• [PATCH v3 0/4] ledtrig-tty: add additional tty state evaluation
  • From: Florian Eckert
• [PATCH v3 1/4] tty: whitespaces in descriptions corrected by replacing tabs with spaces.
  • From: Florian Eckert
• [PATCH v3 4/4] trigger: ledtrig-tty: add new line mode to triggers
  • From: Florian Eckert
• [PATCH v3 2/4] tty: add new helper function tty_get_tiocm
  • From: Florian Eckert
• [PATCH v3 3/4] trigger: ledtrig-tty: move variable definition to the top
  • From: Florian Eckert
• Re: Kernel 6.5 ttyS1 hang with qemu (was Re: [OE-core] Summary of the remaining 6.5 kernel serial issue (and 6.5 summary)
  • From: Tony Lindgren
• [PATCH] dt-bindings: serial: re-order entries to match coding convention
  • From: Krzysztof Kozlowski
• Re: [PATCH 1/2] dt-bindings: serial: sc16is7xx: move 'allOf' block after 'required'
  • From: Krzysztof Kozlowski
• Re: [PATCH 2/2] dt-bindings: serial: sc16is7xx: remove 'clock-frequency' property
  • From: Krzysztof Kozlowski
• Re: Kernel 6.5 ttyS1 hang with qemu (was Re: [OE-core] Summary of the remaining 6.5 kernel serial issue (and 6.5 summary)
  • From: Mikko Rapeli
• Re: [PATCH v3 7/7] tty: 8250: Add Brainboxes Oxford Semiconductor-based quirks
  • From: Jiri Slaby
• Re: [PATCH v3 6/7] tty: 8250: Add support for Intashield IX cards
  • From: Jiri Slaby
• Re: [PATCH v3 5/7] tty: 8250: Add support for and fix up additional Brainboxes PX cards
  • From: Jiri Slaby
• Re: [PATCH v3 4/7] tty: 8250: Add support for Intashield IS-100
  • From: Jiri Slaby
• Re: [PATCH v3 3/7] tty: 8250: Add support for Brainboxes UP cards
  • From: Jiri Slaby
• Re: [PATCH v3 2/7] tty: 8250: Add support for additional Brainboxes UC cards
  • From: Jiri Slaby
• Re: [PATCH v3 1/7] tty: 8250: Fix IS-200 PCI ID comment
  • From: Jiri Slaby
• Re: [PATCH v2 1/3] serial: core: Potential overflow of frame_time
  • From: Jiri Slaby
• Re: [Patch v2 6/6] tty: serial: 8250: Add support for MOXA PCIe boards to switch interface between RS422/RS485
  • From: Jiri Slaby
• Re: [Patch v2 5/6] tty: serial: 8250: Fix MOXA RS422/RS485 PCIe boards not work by default
  • From: Jiri Slaby
• Re: [Patch v2 4/6] tty: serial: 8250: Add support for MOXA Mini PCIe boards
  • From: Jiri Slaby
• Re: [Patch v2 3/6] tty: serial: 8250: Relocate macros within 8250_pci.c
  • From: Jiri Slaby
• Re: [Patch v2 2/6] tty: serial: 8250: Cleanup MOXA configurations within 8250_pci.c
  • From: Jiri Slaby
• Re: [Patch v2 1/6] tty: serial: 8250: Modify MOXA enum name within 8250_pci.c
  • From: Jiri Slaby
• [Patch v2 6/6] tty: serial: 8250: Add support for MOXA PCIe boards to switch interface between RS422/RS485
  • From: Crescent CY Hsieh
• [Patch v2 5/6] tty: serial: 8250: Fix MOXA RS422/RS485 PCIe boards not work by default
  • From: Crescent CY Hsieh
• [Patch v2 4/6] tty: serial: 8250: Add support for MOXA Mini PCIe boards
  • From: Crescent CY Hsieh
• [Patch v2 3/6] tty: serial: 8250: Relocate macros within 8250_pci.c
  • From: Crescent CY Hsieh
• [Patch v2 2/6] tty: serial: 8250: Cleanup MOXA configurations within 8250_pci.c
  • From: Crescent CY Hsieh
• [Patch v2 1/6] tty: serial: 8250: Modify MOXA enum name within 8250_pci.c
  • From: Crescent CY Hsieh
• [Patch v2 0/6] tty: serial: 8250: Changes of MOXA PCIe boards in 8250_pci.c
  • From: Crescent CY Hsieh
• Re: [PATCH] dt-bindings: serial: snps-dw-apb-uart: Add property to drain TX FIFO
  • From: Rob Herring
• [PATCH] dt-bindings: serial: snps-dw-apb-uart: Add property to drain TX FIFO
  • From: Richard Laing
• [PATCH] serial: 8250_dw: Allow TX FIFO to drain before writing to UART_LCR An issue has been observed on the Broadcom BCM56160 serial port which appears closely related to a similar issue on the Marvell Armada 38x serial port.
  • From: Richard Laing
• [PATCH] dt-bindings: serial: snps-dw-apb-uart: Add property to drain TX FIFO
  • From: Richard Laing
• Re: Kernel 6.5 ttyS1 hang with qemu (was Re: [OE-core] Summary of the remaining 6.5 kernel serial issue (and 6.5 summary)
  • From: Richard Purdie
• Re: [PATCH v2 1/3] serial: core: Potential overflow of frame_time
  • From: VAMSHI GAJJELA
• [PATCH v3 7/7] tty: 8250: Add Brainboxes Oxford Semiconductor-based quirks
  • From: Cameron Williams
• [PATCH v3 6/7] tty: 8250: Add support for Intashield IX cards
  • From: Cameron Williams
• [PATCH v3 3/7] tty: 8250: Add support for Brainboxes UP cards
  • From: Cameron Williams
• [PATCH v3 4/7] tty: 8250: Add support for Intashield IS-100
  • From: Cameron Williams
• [PATCH v3 5/7] tty: 8250: Add support for and fix up additional Brainboxes PX cards
  • From: Cameron Williams
• [PATCH v3 2/7] tty: 8250: Add support for additional Brainboxes UC cards
  • From: Cameron Williams
• [PATCH v3 1/7] tty: 8250: Fix IS-200 PCI ID comment
  • From: Cameron Williams
• [PATCH v3 0/7] Brainboxes serial cards additions/fixes
  • From: Cameron Williams
• Re: [GIT PULL] TTY/Serial driver fixes for 6.6-rc6
  • From: pr-tracker-bot
• Re: Kernel 6.5 ttyS1 hang with qemu (was Re: [OE-core] Summary of the remaining 6.5 kernel serial issue (and 6.5 summary)
  • From: Greg Kroah-Hartman
• [GIT PULL] TTY/Serial driver fixes for 6.6-rc6
  • From: Greg KH
• Re: [PATCH v3 0/6] Fixes and improvements for RS485
  • From: Lino Sanfilippo
• Re: Kernel 6.5 ttyS1 hang with qemu (was Re: [OE-core] Summary of the remaining 6.5 kernel serial issue (and 6.5 summary)
  • From: Richard Purdie
• Re: [PATCH v2 1/3] serial: core: Potential overflow of frame_time
  • From: Hugo Villeneuve
• Re: [PATCH v2 1/7] tty: 8250: Fix IS-200 PCI ID comment
  • From: Greg KH
• [PATCH v2 1/3] serial: core: Potential overflow of frame_time
  • From: Vamshi Gajjela
• Re: [PATCH v3 3/6] serial: core: fix sanitizing check for RTS settings
  • From: Lino Sanfilippo
• Re: [PATCH v2 1/7] tty: 8250: Fix IS-200 PCI ID comment
  • From: Cameron Williams
• [PATCH v6] tty: serial: meson: fix hard LOCKUP on crtscts mode
  • From: Pavel Krasavin
• Re: Kernel 6.5 ttyS1 hang with qemu (was Re: [OE-core] Summary of the remaining 6.5 kernel serial issue (and 6.5 summary)
  • From: Richard Purdie
• [PATCH 3/3] serial: core: Update uart_poll_timeout function to return unsigned int
  • From: Vamshi Gajjela
• [PATCH 2/3] serial: core: Make local variable size to u64
  • From: Vamshi Gajjela
• [PATCH 1/3] serial: core: Potential overflow of frame_time
  • From: Vamshi Gajjela
• [PATCH 0/3] serial core type consistency and overflow checks
  • From: Vamshi Gajjela
• Re: Kernel 6.5 ttyS1 hang with qemu (was Re: [OE-core] Summary of the remaining 6.5 kernel serial issue (and 6.5 summary)
  • From: Richard Purdie
• Re: [PATCH v2 1/7] tty: 8250: Fix IS-200 PCI ID comment
  • From: Greg KH
• Re: [PATCH v5] tty: serial: meson: fix hard LOCKUP on crtscts mode
  • From: Greg Kroah-Hartman
• Re: [PATCH v3 4/4] clk: renesas: add minimal boot support for RZ/G3S SoC
  • From: kernel test robot
• [PATCH v2 7/7] tty: 8250: Add Brainboxes Oxford Semiconductor-based quirks
  • From: Cameron Williams
• [PATCH v2 6/7] tty: 8250: Add support for Intashield IX cards
  • From: Cameron Williams
• [PATCH v2 5/7] tty: 8250: Add support for and fix up additional Brainboxes PX cards
  • From: Cameron Williams
• [PATCH v2 4/7] tty: 8250: Add support for Intashield IS-100
  • From: Cameron Williams
• [PATCH v2 3/7] tty: 8250: Add support for Brainboxes UP cards
  • From: Cameron Williams
• [PATCH v2 2/7] tty: 8250: Add support for additional Brainboxes UC cards
  • From: Cameron Williams
• [PATCH v2 1/7] tty: 8250: Fix IS-200 PCI ID comment
  • From: Cameron Williams
• [PATCH v2 0/7] Brainboxes serial cards additions/fixes
  • From: Cameron Williams
• Re: [PATCH] serial: amba-pl011: set fwnode from parent device
  • From: Saravana Kannan
• [PATCH v5] tty: serial: meson: fix hard LOCKUP on crtscts mode
  • From: Pavel Krasavin
• Re: [PATCH v4] tty: serial: meson: fix hard LOCKUP on crtscts mode
  • From: Pavel Krasavin
• [PATCH] serial: amba-pl011: set fwnode from parent device
  • From: Emil Kronborg Andersen
• Re: [PATCH v2 7/8] tty: Add SBI debug console support to HVC SBI driver
  • From: Anup Patel
• Re: [PATCH v4] tty: serial: meson: fix hard LOCKUP on crtscts mode
  • From: Neil Armstrong
• [PATCH 2/2] dt-bindings: serial: sc16is7xx: remove 'clock-frequency' property
  • From: Hugo Villeneuve
• [PATCH 0/2] serial: sc16is7xx: device tree improvements
  • From: Hugo Villeneuve
• [PATCH 1/2] dt-bindings: serial: sc16is7xx: move 'allOf' block after 'required'
  • From: Hugo Villeneuve
• Re: [PATCH v4] tty: serial: meson: fix hard LOCKUP on crtscts mode
  • From: Dmitry Rokosov
• [PATCH v4] tty: serial: meson: fix hard LOCKUP on crtscts mode
  • From: Pavel Krasavin
• Re: [PATCH V2 1/2] dt-bindings: Add optional gpio property to uartps node to support rs485
  • From: m . brock
• Re: [PATCH v2] tty: serial: meson: hard LOCKUP on crtscts mode
  • From: Pavel Krasavin
• Re: [PATCH v2] tty: serial: meson: hard LOCKUP on crtscts mode
  • From: Jiri Slaby
• Re: [PATCH v3 3/6] serial: core: fix sanitizing check for RTS settings
  • From: Ilpo Järvinen
• Re: [PATCH v3] tty: serial: meson: hard LOCKUP on crtscts mode
  • From: Dmitry Rokosov
• Re: [PATCH v3] tty: serial: meson: hard LOCKUP on crtscts mode
  • From: Neil Armstrong
• Re: [PATCH] vt: Clean up errors in selection.h
  • From: Greg KH
• [PATCH] vt: Clean up errors in selection.h
  • From: chenguohua
• Re: [PATCH v3 3/6] serial: core: fix sanitizing check for RTS settings
  • From: Lino Sanfilippo
• Re: [PATCH V2 1/2] dt-bindings: Add optional gpio property to uartps node to support rs485
  • From: Rob Herring
• [PATCH v5 tty-next 0/2] serial: Add driver for National Instruments UARTs
  • From: Brenda Streiff
• [PATCH v5 tty-next 2/2] serial: 8250: add driver for NI UARTs
  • From: Brenda Streiff
• [PATCH v5 tty-next 1/2] dt-bindings: serial: ni,ni16650: add bindings
  • From: Brenda Streiff
• Re: [PATCH V2 2/2] tty: serial: uartps: Add rs485 support to uartps driver
  • From: m . brock
• Re: [PATCH V2 1/2] dt-bindings: Add optional gpio property to uartps node to support rs485
  • From: m . brock
• Re: [PATCH v2] dt-bindings: serial: max310x: convert to YAML
  • From: Krzysztof Kozlowski
• Re: [PATCH v3 02/20] dt-bindings: clock: Add Google gs101 clock management unit bindings
  • From: William McVicker
• Re: [PATCH v3 12/20] clk: samsung: clk-gs101: Add support for CMU_MISC clock unit
  • From: Peter Griffin
• [PATCH v3] tty: serial: meson: hard LOCKUP on crtscts mode
  • From: Pavel Krasavin
• Re: [PATCH v6 10/11] ARM: dts: stm32: add ETZPC as a system bus for STM32MP15x boards
  • From: Rob Herring
• [PATCH v2] dt-bindings: serial: max310x: convert to YAML
  • From: Hugo Villeneuve
• Re: [PATCH] dt-bindings: max310x: convert to YAML
  • From: Hugo Villeneuve
• Re: [PATCH v3 16/20] tty: serial: samsung: Add gs101 compatible and SoC data
  • From: Krzysztof Kozlowski
• Re: [PATCH v3 16/20] tty: serial: samsung: Add gs101 compatible and SoC data
  • From: Peter Griffin
• Re: [PATCH] dt-bindings: max310x: convert to YAML
  • From: Krzysztof Kozlowski
• Re: [PATCH] dt-bindings: max310x: convert to YAML
  • From: Hugo Villeneuve
• Re: [PATCH v3 10/20] clk: samsung: clk-gs101: Add cmu_top registers, plls, mux and gates
  • From: Peter Griffin
• Re: [PATCH v2] tty: serial: meson: hard LOCKUP on crtscts mode
  • From: Greg Kroah-Hartman
• [PATCH v2] tty: serial: meson: hard LOCKUP on crtscts mode
  • From: pkrasavin
• Re: [PATCH v3 3/6] serial: core: fix sanitizing check for RTS settings
  • From: Ilpo Järvinen
• Re: [PATCH] tty: serial: meson: hard LOCKUP on crtscts mode
  • From: pkrasavin
• Re: [PATCH v3 10/20] clk: samsung: clk-gs101: Add cmu_top registers, plls, mux and gates
  • From: Krzysztof Kozlowski
• Re: [PATCH v3 10/20] clk: samsung: clk-gs101: Add cmu_top registers, plls, mux and gates
  • From: Peter Griffin
• Re: [PATCH v3 09/20] clk: samsung: clk-pll: Add support for pll_{0516,0517,518}
  • From: Peter Griffin
• Re: [PATCH v2 7/8] tty: Add SBI debug console support to HVC SBI driver
  • From: Björn Töpel
• Re: [PATCH v3 02/20] dt-bindings: clock: Add Google gs101 clock management unit bindings
  • From: Krzysztof Kozlowski
• Re: [PATCH v2 07/20] dt-bindings: pinctrl: samsung: add gs101-wakeup-eint compatible
  • From: Peter Griffin
• Re: [PATCH v3 05/20] dt-bindings: arm: google: Add bindings for Google ARM platforms
  • From: Peter Griffin
• Re: [PATCH v3 1/6] serial: Do not hold the port lock when setting rx-during-tx GPIO
  • From: Lino Sanfilippo
• Re: [PATCH v3 04/20] dt-bindings: watchdog: Document Google gs101 & gs201 watchdog bindings
  • From: Peter Griffin
• Re: [PATCH v3 02/20] dt-bindings: clock: Add Google gs101 clock management unit bindings
  • From: Peter Griffin
• Re: [PATCH] tty: serial: meson: hard LOCKUP on crtscts mode
  • From: Dmitry Rokosov
• Re: [PATCH] serial: xilinx_uartps: unset STOPBRK when setting STARTBRK
  • From: Greg Kroah-Hartman
• Re: [PATCH v3 02/20] dt-bindings: clock: Add Google gs101 clock management unit bindings
  • From: Peter Griffin
• [PATCH] tty: serial: meson: hard LOCKUP on crtscts mode
  • From: pkrasavin
• Re: [PATCH v3 02/20] dt-bindings: clock: Add Google gs101 clock management unit bindings
  • From: Krzysztof Kozlowski
• Re: [PATCH v3 02/20] dt-bindings: clock: Add Google gs101 clock management unit bindings
  • From: Peter Griffin
• Re: [PATCH v3 02/20] dt-bindings: clock: Add Google gs101 clock management unit bindings
  • From: Krzysztof Kozlowski
• Re: [PATCH v2 3/4] trigger: ledtrig-tty: move variable definition to the top
  • From: Lee Jones
• Re: [PATCH v3 02/20] dt-bindings: clock: Add Google gs101 clock management unit bindings
  • From: Peter Griffin
• Re: [PATCH] dt-bindings: max310x: convert to YAML
  • From: Krzysztof Kozlowski
• Re: [PATCH] serial: xilinx_uartps: unset STOPBRK when setting STARTBRK
  • From: Julien MALIK - UNSEENLABS
• Re: [PATCH v3 18/20] arm64: dts: google: Add initial Oriole/pixel 6 board support
  • From: Sam Protsenko
• Re: [PATCH v3 17/20] arm64: dts: google: Add initial Google gs101 SoC support
  • From: Krzysztof Kozlowski
• Re: [PATCH v3 17/20] arm64: dts: google: Add initial Google gs101 SoC support
  • From: Sam Protsenko
• Re: [PATCH v3 17/20] arm64: dts: google: Add initial Google gs101 SoC support
  • From: Krzysztof Kozlowski
• Re: [PATCH v3 18/20] arm64: dts: google: Add initial Oriole/pixel 6 board support
  • From: Krzysztof Kozlowski
• Re: [PATCH v3 17/20] arm64: dts: google: Add initial Google gs101 SoC support
  • From: Krzysztof Kozlowski
• Re: [PATCH v3 00/20] Add minimal Tensor/GS101 SoC support and Oriole/Pixel6 board
  • From: Krzysztof Kozlowski
• Re: [PATCH v3 16/20] tty: serial: samsung: Add gs101 compatible and SoC data
  • From: Krzysztof Kozlowski
• Re: [PATCH v3 15/20] watchdog: s3c2410_wdt: Add support for Google tensor SoCs
  • From: Krzysztof Kozlowski
• Re: [PATCH v3 19/20] arm64: defconfig: Enable Google Tensor SoC
  • From: Sam Protsenko
• Re: [PATCH v3 07/20] dt-bindings: pinctrl: samsung: add gs101-wakeup-eint compatible
  • From: Krzysztof Kozlowski
• Re: [PATCH v3 02/20] dt-bindings: clock: Add Google gs101 clock management unit bindings
  • From: Krzysztof Kozlowski
• Re: [PATCH v3 02/20] dt-bindings: clock: Add Google gs101 clock management unit bindings
  • From: Krzysztof Kozlowski
• Re: [PATCH v3 16/20] tty: serial: samsung: Add gs101 compatible and SoC data
  • From: Arnd Bergmann
• Re: [PATCH v3 20/20] MAINTAINERS: add entry for Google Tensor SoC
  • From: Sam Protsenko
• Re: [PATCH v3 14/20] pinctrl: samsung: Add gs101 SoC pinctrl configuration
  • From: Sam Protsenko
• Re: [PATCH v3 16/20] tty: serial: samsung: Add gs101 compatible and SoC data
  • From: Sam Protsenko
• [PATCH v2 8/8] RISC-V: Enable SBI based earlycon support
  • From: Anup Patel
• [PATCH v2 7/8] tty: Add SBI debug console support to HVC SBI driver
  • From: Anup Patel
• [PATCH v2 6/8] tty/serial: Add RISC-V SBI debug console based earlycon
  • From: Anup Patel
• [PATCH v2 5/8] RISC-V: Add inline version of sbi_console_putchar/getchar() functions
  • From: Anup Patel
• [PATCH v2 4/8] RISC-V: KVM: Forward SBI DBCN extension to user-space
  • From: Anup Patel
• [PATCH v2 3/8] RISC-V: KVM: Allow some SBI extensions to be disabled by default
  • From: Anup Patel
• [PATCH v2 2/8] RISC-V: KVM: Change the SBI specification version to v2.0
  • From: Anup Patel
• [PATCH v2 1/8] RISC-V: Add defines for SBI debug console extension
  • From: Anup Patel
• [PATCH v2 0/8] RISC-V SBI debug console extension support
  • From: Anup Patel
• Re: [PATCH v3 15/20] watchdog: s3c2410_wdt: Add support for Google tensor SoCs
  • From: Sam Protsenko
• Re: [PATCH v3 12/20] clk: samsung: clk-gs101: Add support for CMU_MISC clock unit
  • From: Sam Protsenko
• Re: [PATCH v3 11/20] clk: samsung: clk-gs101: add CMU_APM support
  • From: Sam Protsenko
• Re: [PATCH v3 10/20] clk: samsung: clk-gs101: Add cmu_top registers, plls, mux and gates
  • From: Sam Protsenko
• Re: [PATCH v3 09/20] clk: samsung: clk-pll: Add support for pll_{0516,0517,518}
  • From: Sam Protsenko
• Re: [PATCH v3 08/20] dt-bindings: serial: samsung: Add google-gs101-uart compatible
  • From: Sam Protsenko
• Re: [PATCH v2 07/20] dt-bindings: pinctrl: samsung: add gs101-wakeup-eint compatible
  • From: Sam Protsenko
• Re: [PATCH v3 06/20] dt-bindings: pinctrl: samsung: add google,gs101-pinctrl compatible
  • From: Sam Protsenko
• Re: [PATCH v3 05/20] dt-bindings: arm: google: Add bindings for Google ARM platforms
  • From: Sam Protsenko
• Re: [PATCH v3 04/20] dt-bindings: watchdog: Document Google gs101 & gs201 watchdog bindings
  • From: Sam Protsenko
• Re: [PATCH v3 03/20] dt-bindings: soc: google: exynos-sysreg: add dedicated SYSREG compatibles to GS101
  • From: Sam Protsenko
• Re: [PATCH v3 02/20] dt-bindings: clock: Add Google gs101 clock management unit bindings
  • From: Sam Protsenko
• Re: [PATCH v3 00/20] Add minimal Tensor/GS101 SoC support and Oriole/Pixel6 board
  • From: Sam Protsenko
• Re: [PATCH v3 13/20] pinctrl: samsung: Add filter selection support for alive banks
  • From: Sam Protsenko
• Re: [PATCH v3 1/6] serial: Do not hold the port lock when setting rx-during-tx GPIO
  • From: Hugo Villeneuve
• [PATCH] dt-bindings: max310x: convert to YAML
  • From: Hugo Villeneuve
• Re: [PATCH v3 00/20] Add minimal Tensor/GS101 SoC support and Oriole/Pixel6 board
  • From: William McVicker
• Re: [PATCH v3 18/20] arm64: dts: google: Add initial Oriole/pixel 6 board support
  • From: William McVicker
• Re: [PATCH v3 19/20] arm64: defconfig: Enable Google Tensor SoC
  • From: William McVicker
• Re: [PATCH v3 17/20] arm64: dts: google: Add initial Google gs101 SoC support
  • From: William McVicker
• Re: [PATCH v3 16/20] tty: serial: samsung: Add gs101 compatible and SoC data
  • From: William McVicker
• Re: [PATCH v3 14/20] pinctrl: samsung: Add gs101 SoC pinctrl configuration
  • From: William McVicker
• Re: [PATCH v3 14/20] pinctrl: samsung: Add gs101 SoC pinctrl configuration
  • From: William McVicker
• Re: [PATCH v3 13/20] pinctrl: samsung: Add filter selection support for alive banks
  • From: William McVicker
• Re: [PATCH v3 11/20] clk: samsung: clk-gs101: add CMU_APM support
  • From: William McVicker
• Re: [PATCH v3 10/20] clk: samsung: clk-gs101: Add cmu_top registers, plls, mux and gates
  • From: William McVicker
• Re: [PATCH v3 12/20] clk: samsung: clk-gs101: Add support for CMU_MISC clock unit
  • From: William McVicker
• Re: [PATCH v3 09/20] clk: samsung: clk-pll: Add support for pll_{0516,0517,518}
  • From: William McVicker
• Re: [PATCH v3 02/20] dt-bindings: clock: Add Google gs101 clock management unit bindings
  • From: William McVicker
• Re: [PATCH v3 15/20] watchdog: s3c2410_wdt: Add support for Google tensor SoCs
  • From: Guenter Roeck
• Re: [PATCH v5] arch/x86: port I/O tracing on x86
  • From: Greg KH
• Re: [PATCH v5] arch/x86: port I/O tracing on x86
  • From: Dan Raymond
• Re: [PATCH v3 01/20] dt-bindings: soc: samsung: exynos-pmu: Add gs101 compatible
  • From: Sam Protsenko
• [PATCH v3 20/20] MAINTAINERS: add entry for Google Tensor SoC
  • From: Peter Griffin
• [PATCH v3 19/20] arm64: defconfig: Enable Google Tensor SoC
  • From: Peter Griffin
• [PATCH v3 17/20] arm64: dts: google: Add initial Google gs101 SoC support
  • From: Peter Griffin
• [PATCH v3 18/20] arm64: dts: google: Add initial Oriole/pixel 6 board support
  • From: Peter Griffin
• [PATCH v3 16/20] tty: serial: samsung: Add gs101 compatible and SoC data
  • From: Peter Griffin
• [PATCH v3 15/20] watchdog: s3c2410_wdt: Add support for Google tensor SoCs
  • From: Peter Griffin
• [PATCH v3 13/20] pinctrl: samsung: Add filter selection support for alive banks
  • From: Peter Griffin
• [PATCH v3 14/20] pinctrl: samsung: Add gs101 SoC pinctrl configuration
  • From: Peter Griffin
• [PATCH v3 07/20] dt-bindings: pinctrl: samsung: add gs101-wakeup-eint compatible
  • From: Peter Griffin
• [PATCH v3 12/20] clk: samsung: clk-gs101: Add support for CMU_MISC clock unit
  • From: Peter Griffin
• [PATCH v3 10/20] clk: samsung: clk-gs101: Add cmu_top registers, plls, mux and gates
  • From: Peter Griffin
• [PATCH v3 11/20] clk: samsung: clk-gs101: add CMU_APM support
  • From: Peter Griffin
• [PATCH v3 08/20] dt-bindings: serial: samsung: Add google-gs101-uart compatible
  • From: Peter Griffin
• [PATCH v3 09/20] clk: samsung: clk-pll: Add support for pll_{0516,0517,518}
  • From: Peter Griffin
• [PATCH v3 06/20] dt-bindings: pinctrl: samsung: add google,gs101-pinctrl compatible
  • From: Peter Griffin
• [PATCH v3 05/20] dt-bindings: arm: google: Add bindings for Google ARM platforms
  • From: Peter Griffin
• [PATCH v3 04/20] dt-bindings: watchdog: Document Google gs101 & gs201 watchdog bindings
  • From: Peter Griffin
• [PATCH v3 02/20] dt-bindings: clock: Add Google gs101 clock management unit bindings
  • From: Peter Griffin
• [PATCH v3 03/20] dt-bindings: soc: google: exynos-sysreg: add dedicated SYSREG compatibles to GS101
  • From: Peter Griffin
• [PATCH v3 00/20] Add minimal Tensor/GS101 SoC support and Oriole/Pixel6 board
  • From: Peter Griffin
• [PATCH v3 01/20] dt-bindings: soc: samsung: exynos-pmu: Add gs101 compatible
  • From: Peter Griffin
• Re: [PATCH v2 16/20] tty: serial: samsung: Add gs101 compatible and SoC data
  • From: Peter Griffin
• [PATCH v3 6/6] serial: omap: do not override settings for RS485 support
  • From: Lino Sanfilippo
• [PATCH v3 3/6] serial: core: fix sanitizing check for RTS settings
  • From: Lino Sanfilippo
• [PATCH v3 5/6] serial: core, imx: do not set RS485 enabled if it is not supported
  • From: Lino Sanfilippo
• [PATCH v3 1/6] serial: Do not hold the port lock when setting rx-during-tx GPIO
  • From: Lino Sanfilippo
• [PATCH v3 4/6] serial: core: make sure RS485 cannot be enabled when it is not supported
  • From: Lino Sanfilippo
• [PATCH v3 2/6] serial: core: set missing supported flag for RX during TX GPIO
  • From: Lino Sanfilippo
• [PATCH v3 0/6] Fixes and improvements for RS485
  • From: Lino Sanfilippo
• Re: [PATCH v2 2/7] serial: amba-pl011: get rid of useless wrapper pl011_get_rs485_mode()
  • From: Lino Sanfilippo
• Re: [PATCH v2 2/7] serial: amba-pl011: get rid of useless wrapper pl011_get_rs485_mode()
  • From: Greg KH
• Re: [PATCH v2 2/7] serial: amba-pl011: get rid of useless wrapper pl011_get_rs485_mode()
  • From: Lino Sanfilippo
• Re: [PATCH v2 2/7] serial: amba-pl011: get rid of useless wrapper pl011_get_rs485_mode()
  • From: Greg KH
• [PATCH v2 4/7] serial: core: fix sanitizing check for RTS settings
  • From: Lino Sanfilippo
• [PATCH v2 5/7] serial: core: make sure RS485 cannot be enabled when it is not supported
  • From: Lino Sanfilippo
• [PATCH v2 6/7] serial: core, imx: do not set RS485 enabled if it is not supported
  • From: Lino Sanfilippo
• [PATCH v2 7/7] serial: omap: do not override settings for RS485 support
  • From: Lino Sanfilippo
• [PATCH v2 3/7] serial: core: set missing supported flag for RX during TX GPIO
  • From: Lino Sanfilippo
• [PATCH v2 2/7] serial: amba-pl011: get rid of useless wrapper pl011_get_rs485_mode()
  • From: Lino Sanfilippo
• [PATCH v2 1/7] serial: Do not hold the port lock when setting rx-during-tx GPIO
  • From: Lino Sanfilippo
• [PATCH v2 0/7] Fixes and improvements for RS485
  • From: Lino Sanfilippo
• Re: [PATCH 2/6] RISC-V: KVM: Change the SBI specification version to v2.0
  • From: Anup Patel
• Re: [PATCH 2/6] RISC-V: KVM: Change the SBI specification version to v2.0
  • From: Greg Kroah-Hartman
• [PATCH V2 2/2] tty: serial: uartps: Add rs485 support to uartps driver
  • From: Manikanta Guntupalli
• [PATCH V2 1/2] dt-bindings: Add optional gpio property to uartps node to support rs485
  • From: Manikanta Guntupalli
• [PATCH V2 0/2] Add rs485 support to uartps driver
  • From: Manikanta Guntupalli
• Re: [PATCH v2 15/20] watchdog: s3c2410_wdt: Add support for Google tensor SoCs
  • From: Peter Griffin
• Re: [PATCH v2 00/20] Add minimal Tensor/GS101 SoC support and Oriole/Pixel6 board
  • From: Peter Griffin
• Re: [PATCH v2 08/20] dt-bindings: serial: samsung: Add google-gs101-uart compatible
  • From: Krzysztof Kozlowski
• Re: [PATCH v2 08/20] dt-bindings: serial: samsung: Add google-gs101-uart compatible
  • From: Peter Griffin
• [PATCH] serial: max310x: remove trailing whitespaces
  • From: Hugo Villeneuve
• Re: [PATCH v2 00/20] Add minimal Tensor/GS101 SoC support and Oriole/Pixel6 board
  • From: Krzysztof Kozlowski
• Re: [PATCH v2 00/20] Add minimal Tensor/GS101 SoC support and Oriole/Pixel6 board
  • From: Krzysztof Kozlowski
• Re: [PATCH v2 08/20] dt-bindings: serial: samsung: Add google-gs101-uart compatible
  • From: Krzysztof Kozlowski
• Re: [PATCH v2 08/20] dt-bindings: serial: samsung: Add google-gs101-uart compatible
  • From: Krzysztof Kozlowski
• Re: [PATCH v2 08/20] dt-bindings: serial: samsung: Add google-gs101-uart compatible
  • From: Linus Walleij
• Re: [PATCH v2 08/20] dt-bindings: serial: samsung: Add google-gs101-uart compatible
  • From: Peter Griffin
• Re: [PATCH 2/6] RISC-V: KVM: Change the SBI specification version to v2.0
  • From: Anup Patel
• Re: [PATCH 3/6] RISC-V: KVM: Forward SBI DBCN extension to user-space
  • From: Anup Patel
• Re: [PATCH v2 08/20] dt-bindings: serial: samsung: Add google-gs101-uart compatible
  • From: Arnd Bergmann
• Re: [PATCH v2 08/20] dt-bindings: serial: samsung: Add google-gs101-uart compatible
  • From: Arnd Bergmann
• Re: [PATCH v2 08/20] dt-bindings: serial: samsung: Add google-gs101-uart compatible
  • From: Peter Griffin
• Re: [PATCH v2 00/20] Add minimal Tensor/GS101 SoC support and Oriole/Pixel6 board
  • From: Greg KH
• Re: [PATCH v2 00/20] Add minimal Tensor/GS101 SoC support and Oriole/Pixel6 board
  • From: Peter Griffin
• Re: [PATCH v6 10/11] ARM: dts: stm32: add ETZPC as a system bus for STM32MP15x boards
  • From: Gatien CHEVALLIER
• Re: [PATCH v2 08/20] dt-bindings: serial: samsung: Add google-gs101-uart compatible
  • From: Tudor Ambarus
• Re: [PATCH v2 00/20] Add minimal Tensor/GS101 SoC support and Oriole/Pixel6 board
  • From: Tudor Ambarus
• Re: [PATCH v2 00/20] Add minimal Tensor/GS101 SoC support and Oriole/Pixel6 board
  • From: Peter Griffin
• Re: [PATCH v2 00/20] Add minimal Tensor/GS101 SoC support and Oriole/Pixel6 board
  • From: Greg KH
• Re: [PATCH 2/6] RISC-V: KVM: Change the SBI specification version to v2.0
  • From: Greg Kroah-Hartman
• Re: [PATCH 3/6] RISC-V: KVM: Forward SBI DBCN extension to user-space
  • From: Greg Kroah-Hartman
• [tty:tty-testing] BUILD SUCCESS dd976a97d15b47656991e185a94ef42a0fa5cfd4
  • From: kernel test robot
• Re: [PATCH v2 3/4] trigger: ledtrig-tty: move variable definition to the top
  • From: Florian Eckert
• Re: [PATCH 3/6] RISC-V: KVM: Forward SBI DBCN extension to user-space
  • From: Anup Patel
• Re: [PATCH 2/6] RISC-V: KVM: Change the SBI specification version to v2.0
  • From: Anup Patel
• Re: [PATCH v2 00/20] Add minimal Tensor/GS101 SoC support and Oriole/Pixel6 board
  • From: Tudor Ambarus
• Re: [PATCH 4/6] tty/serial: Add RISC-V SBI debug console based earlycon
  • From: Anup Patel
• Re: [PATCH 5/6] tty: Add SBI debug console support to HVC SBI driver
  • From: Anup Patel
• Re: [PATCH v2 15/20] watchdog: s3c2410_wdt: Add support for Google tensor SoCs
  • From: Guenter Roeck
• [PATCH v2 18/20] arm64: dts: google: Add initial Oriole/pixel 6 board support
  • From: Peter Griffin
• [PATCH v2 00/20] Add minimal Tensor/GS101 SoC support and Oriole/Pixel6 board
  • From: Peter Griffin
• [PATCH v2 20/20] MAINTAINERS: add entry for Google Tensor SoC
  • From: Peter Griffin
• [PATCH v2 13/20] pinctrl: samsung: Add filter selection support for alive banks
  • From: Peter Griffin
• [PATCH v2 12/20] clk: samsung: clk-gs101: Add support for CMU_MISC clock unit
  • From: Peter Griffin
• [PATCH v2 10/20] clk: samsung: clk-gs101: Add cmu_top registers, plls, mux and gates
  • From: Peter Griffin
• [PATCH v2 16/20] tty: serial: samsung: Add gs101 compatible and SoC data
  • From: Peter Griffin
• [PATCH v2 04/20] dt-bindings: watchdog: Document Google gs101 & gs201 watchdog bindings
  • From: Peter Griffin
• [PATCH v2 03/20] dt-bindings: soc: google: exynos-sysreg: add dedicated SYSREG compatibles to GS101
  • From: Peter Griffin
• [PATCH v2 09/20] clk: samsung: clk-pll: Add support for pll_{0516,0517,518}
  • From: Peter Griffin
• [PATCH v2 19/20] arm64: defconfig: Enable Google Tensor SoC
  • From: Peter Griffin
• [PATCH v2 15/20] watchdog: s3c2410_wdt: Add support for Google tensor SoCs
  • From: Peter Griffin
• [PATCH v2 14/20] pinctrl: samsung: Add gs101 SoC pinctrl configuration
  • From: Peter Griffin
• [PATCH v2 17/20] arm64: dts: google: Add initial Google gs101 SoC support
  • From: Peter Griffin
• [PATCH v2 02/20] dt-bindings: clock: Add Google gs101 clock management unit bindings
  • From: Peter Griffin
• [PATCH v2 08/20] dt-bindings: serial: samsung: Add google-gs101-uart compatible
  • From: Peter Griffin
• [PATCH v2 06/20] dt-bindings: pinctrl: samsung: add google,gs101-pinctrl compatible
  • From: Peter Griffin
• [PATCH v2 05/20] dt-bindings: arm: google: Add bindings for Google ARM platforms
  • From: Peter Griffin
• [PATCH v2 07/20] dt-bindings: pinctrl: samsung: add gs101-wakeup-eint compatible
  • From: Peter Griffin
• [PATCH v2 11/20] clk: samsung: clk-gs101: add CMU_APM support
  • From: Peter Griffin
• [PATCH v2 01/20] dt-bindings: soc: samsung: exynos-pmu: Add gs101 compatible
  • From: Peter Griffin
• Re: [PATCH v2 00/15] sysctl: Remove sentinel elements from drivers
  • From: Luis Chamberlain
• Re: [PATCH 4/6] tty/serial: Add RISC-V SBI debug console based earlycon
  • From: Greg Kroah-Hartman
• Re: [PATCH 3/6] RISC-V: KVM: Forward SBI DBCN extension to user-space
  • From: Greg Kroah-Hartman
• Re: [PATCH 2/6] RISC-V: KVM: Change the SBI specification version to v2.0
  • From: Greg Kroah-Hartman
• Re: [PATCH 5/6] tty: Add SBI debug console support to HVC SBI driver
  • From: Greg Kroah-Hartman
• [PATCH 4/6] tty/serial: Add RISC-V SBI debug console based earlycon
  • From: Anup Patel
• [PATCH 6/6] RISC-V: Enable SBI based earlycon support
  • From: Anup Patel
• [PATCH 5/6] tty: Add SBI debug console support to HVC SBI driver
  • From: Anup Patel
• [PATCH 3/6] RISC-V: KVM: Forward SBI DBCN extension to user-space
  • From: Anup Patel
• [PATCH 2/6] RISC-V: KVM: Change the SBI specification version to v2.0
  • From: Anup Patel
• [PATCH 1/6] RISC-V: Add defines for SBI debug console extension
  • From: Anup Patel
• [PATCH 0/6] RISC-V SBI debug console extension support
  • From: Anup Patel
• [PATCH v6 10/11] ARM: dts: stm32: add ETZPC as a system bus for STM32MP15x boards
  • From: Gatien Chevallier
• [PATCH v6 08/11] arm64: dts: st: add RIFSC as an access controller for STM32MP25x boards
  • From: Gatien Chevallier
• [PATCH v6 11/11] ARM: dts: stm32: add ETZPC as a system bus for STM32MP13x boards
  • From: Gatien Chevallier
• [PATCH v6 09/11] bus: etzpc: introduce ETZPC firewall controller driver
  • From: Gatien Chevallier
• [PATCH v6 04/11] dt-bindings: bus: document ETZPC
  • From: Gatien Chevallier
• [PATCH v6 07/11] bus: rifsc: introduce RIFSC firewall controller driver
  • From: Gatien Chevallier
• [PATCH v6 05/11] firewall: introduce stm32_firewall framework
  • From: Gatien Chevallier
• [PATCH v6 06/11] of: property: fw_devlink: Add support for "access-controller"
  • From: Gatien Chevallier
• [PATCH v6 02/11] dt-bindings: treewide: add access-controllers description
  • From: Gatien Chevallier
• [PATCH v6 00/11] Introduce STM32 Firewall framework
  • From: Gatien Chevallier
• [PATCH v6 03/11] dt-bindings: bus: document RIFSC
  • From: Gatien Chevallier
• [PATCH v6 01/11] dt-bindings: document generic access controllers
  • From: Gatien Chevallier
• Re: serial: 8250_omap: suspend issue with console_suspend disabled
  • From: Thomas Richard
• [PATCH v5 5/5] drivers/tty/serial: add ESP32S3 ACM gadget driver
  • From: Max Filippov