Hi Frank, kernel test robot noticed the following build errors: [auto build test ERROR on tty/tty-testing] [also build test ERROR on tty/tty-next tty/tty-linus linus/master v6.6 next-20231106] [If your patch is applied to the wrong git tree, kindly drop us a note. And when submitting patch, we suggest to use '--base' as documented in https://git-scm.com/docs/git-format-patch#_base_tree_information] url: https://github.com/intel-lab-lkp/linux/commits/Frank-Li/tty-i3c-add-tty-over-i3c-master-support/20231019-051407 base: https://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty.git tty-testing patch link: https://lore.kernel.org/r/20231018211111.3437929-1-Frank.Li%40nxp.com patch subject: [PATCH 1/1] tty: i3c: add tty over i3c master support config: microblaze-allyesconfig (https://download.01.org/0day-ci/archive/20231107/202311070330.5mylauLR-lkp@xxxxxxxxx/config) compiler: microblaze-linux-gcc (GCC) 13.2.0 reproduce (this is a W=1 build): (https://download.01.org/0day-ci/archive/20231107/202311070330.5mylauLR-lkp@xxxxxxxxx/reproduce) If you fix the issue in a separate patch/commit (i.e. not just a new version of the same patch/commit), kindly add following tags | Reported-by: kernel test robot <lkp@xxxxxxxxx> | Closes: https://lore.kernel.org/oe-kbuild-all/202311070330.5mylauLR-lkp@xxxxxxxxx/ All errors (new ones prefixed by >>): drivers/tty/i3c_tty.c: In function 'tty_i3c_rxwork': >> drivers/tty/i3c_tty.c:265:26: error: 'struct i3c_priv_xfer' has no member named 'actual_len' 265 | if (xfers.actual_len) { | ^ drivers/tty/i3c_tty.c:266:82: error: 'struct i3c_priv_xfer' has no member named 'actual_len' 266 | tty_insert_flip_string(&sport->port, sport->buffer, xfers.actual_len); | ^ >> drivers/tty/i3c_tty.c:271:25: error: implicit declaration of function 'i3c_device_getstatus_format1' [-Werror=implicit-function-declaration] 271 | i3c_device_getstatus_format1(sport->i3cdev, &status); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/tty/i3c_tty.c: At top level: drivers/tty/i3c_tty.c:400:6: warning: no previous prototype for 'i3c_remove' [-Wmissing-prototypes] 400 | void i3c_remove(struct i3c_device *dev) | ^~~~~~~~~~ cc1: some warnings being treated as errors vim +265 drivers/tty/i3c_tty.c 246 247 static void tty_i3c_rxwork(struct work_struct *work) 248 { 249 struct ttyi3c_port *sport = container_of(work, struct ttyi3c_port, rxwork); 250 struct i3c_priv_xfer xfers; 251 int retry = I3C_TTY_RETRY; 252 u16 status = BIT(0); 253 254 do { 255 memset(&xfers, 0, sizeof(xfers)); 256 xfers.data.in = sport->buffer; 257 xfers.len = I3C_TTY_TRANS_SIZE; 258 xfers.rnw = 1; 259 260 if (I3C_TTY_RX_STOP & atomic_read(&sport->status)) 261 break; 262 263 i3c_device_do_priv_xfers(sport->i3cdev, &xfers, 1); 264 > 265 if (xfers.actual_len) { 266 tty_insert_flip_string(&sport->port, sport->buffer, xfers.actual_len); 267 retry = 20; 268 continue; 269 } else { 270 status = BIT(0); > 271 i3c_device_getstatus_format1(sport->i3cdev, &status); 272 /* 273 * Target side need some time to fill data into fifo. Target side may not 274 * have hardware update status in real time. Software update status always 275 * need some delays. 276 * 277 * Generally, target side have cicular buffer in memory, it will be moved 278 * into FIFO by CPU or DMA. 'status' just show if cicular buffer empty. But 279 * there are gap, espcially CPU have not response irq to fill FIFO in time. 280 * So xfers.actual will be zero, wait for little time to avoid flood 281 * transfer in i3c bus. 282 */ 283 usleep_range(I3C_TTY_YIELD_US, 10 * I3C_TTY_YIELD_US); 284 retry--; 285 } 286 287 } while (retry && (status & BIT(0))); 288 289 tty_flip_buffer_push(&sport->port); 290 } 291 -- 0-DAY CI Kernel Test Service https://github.com/intel/lkp-tests/wiki