The driver uses bit shifts and hexadecimal expressions to declare constants. Replace that with the BIT() macro that clarifies intent. Reviewed-by: Linus Walleij <linus.walleij@xxxxxxxxxx> Signed-off-by: Théo Lebrun <theo.lebrun@xxxxxxxxxxx> --- include/linux/amba/serial.h | 183 ++++++++++++++++++++++---------------------- 1 file changed, 92 insertions(+), 91 deletions(-) diff --git a/include/linux/amba/serial.h b/include/linux/amba/serial.h index 27003ec52114..a1f966fcb9c5 100644 --- a/include/linux/amba/serial.h +++ b/include/linux/amba/serial.h @@ -10,6 +10,7 @@ #ifndef ASM_ARM_HARDWARE_SERIAL_AMBA_H #define ASM_ARM_HARDWARE_SERIAL_AMBA_H +#include <linux/bits.h> #include <linux/types.h> /* ------------------------------------------------------------------------------- @@ -70,64 +71,64 @@ #define ZX_UART011_ICR 0x4c #define ZX_UART011_DMACR 0x50 -#define UART011_DR_OE (1 << 11) -#define UART011_DR_BE (1 << 10) -#define UART011_DR_PE (1 << 9) -#define UART011_DR_FE (1 << 8) - -#define UART01x_RSR_OE 0x08 -#define UART01x_RSR_BE 0x04 -#define UART01x_RSR_PE 0x02 -#define UART01x_RSR_FE 0x01 - -#define UART011_FR_RI 0x100 -#define UART011_FR_TXFE 0x080 -#define UART011_FR_RXFF 0x040 -#define UART01x_FR_TXFF 0x020 -#define UART01x_FR_RXFE 0x010 -#define UART01x_FR_BUSY 0x008 -#define UART01x_FR_DCD 0x004 -#define UART01x_FR_DSR 0x002 -#define UART01x_FR_CTS 0x001 +#define UART011_DR_OE BIT(11) +#define UART011_DR_BE BIT(10) +#define UART011_DR_PE BIT(9) +#define UART011_DR_FE BIT(8) + +#define UART01x_RSR_OE BIT(3) +#define UART01x_RSR_BE BIT(2) +#define UART01x_RSR_PE BIT(1) +#define UART01x_RSR_FE BIT(0) + +#define UART011_FR_RI BIT(8) +#define UART011_FR_TXFE BIT(7) +#define UART011_FR_RXFF BIT(6) +#define UART01x_FR_TXFF BIT(5) +#define UART01x_FR_RXFE BIT(4) +#define UART01x_FR_BUSY BIT(3) +#define UART01x_FR_DCD BIT(2) +#define UART01x_FR_DSR BIT(1) +#define UART01x_FR_CTS BIT(0) #define UART01x_FR_TMSK (UART01x_FR_TXFF + UART01x_FR_BUSY) /* * Some bits of Flag Register on ZTE device have different position from * standard ones. */ -#define ZX_UART01x_FR_BUSY 0x100 -#define ZX_UART01x_FR_DSR 0x008 -#define ZX_UART01x_FR_CTS 0x002 -#define ZX_UART011_FR_RI 0x001 - -#define UART011_CR_CTSEN 0x8000 /* CTS hardware flow control */ -#define UART011_CR_RTSEN 0x4000 /* RTS hardware flow control */ -#define UART011_CR_OUT2 0x2000 /* OUT2 */ -#define UART011_CR_OUT1 0x1000 /* OUT1 */ -#define UART011_CR_RTS 0x0800 /* RTS */ -#define UART011_CR_DTR 0x0400 /* DTR */ -#define UART011_CR_RXE 0x0200 /* receive enable */ -#define UART011_CR_TXE 0x0100 /* transmit enable */ -#define UART011_CR_LBE 0x0080 /* loopback enable */ -#define UART010_CR_RTIE 0x0040 -#define UART010_CR_TIE 0x0020 -#define UART010_CR_RIE 0x0010 -#define UART010_CR_MSIE 0x0008 -#define ST_UART011_CR_OVSFACT 0x0008 /* Oversampling factor */ -#define UART01x_CR_IIRLP 0x0004 /* SIR low power mode */ -#define UART01x_CR_SIREN 0x0002 /* SIR enable */ -#define UART01x_CR_UARTEN 0x0001 /* UART enable */ - -#define UART011_LCRH_SPS 0x80 +#define ZX_UART01x_FR_BUSY BIT(8) +#define ZX_UART01x_FR_DSR BIT(3) +#define ZX_UART01x_FR_CTS BIT(1) +#define ZX_UART011_FR_RI BIT(0) + +#define UART011_CR_CTSEN BIT(15) /* CTS hardware flow control */ +#define UART011_CR_RTSEN BIT(14) /* RTS hardware flow control */ +#define UART011_CR_OUT2 BIT(13) /* OUT2 */ +#define UART011_CR_OUT1 BIT(12) /* OUT1 */ +#define UART011_CR_RTS BIT(11) /* RTS */ +#define UART011_CR_DTR BIT(10) /* DTR */ +#define UART011_CR_RXE BIT(9) /* receive enable */ +#define UART011_CR_TXE BIT(8) /* transmit enable */ +#define UART011_CR_LBE BIT(7) /* loopback enable */ +#define UART010_CR_RTIE BIT(6) +#define UART010_CR_TIE BIT(5) +#define UART010_CR_RIE BIT(4) +#define UART010_CR_MSIE BIT(3) +#define ST_UART011_CR_OVSFACT BIT(3) /* Oversampling factor */ +#define UART01x_CR_IIRLP BIT(2) /* SIR low power mode */ +#define UART01x_CR_SIREN BIT(1) /* SIR enable */ +#define UART01x_CR_UARTEN BIT(0) /* UART enable */ + +#define UART011_LCRH_SPS BIT(7) #define UART01x_LCRH_WLEN_8 0x60 #define UART01x_LCRH_WLEN_7 0x40 #define UART01x_LCRH_WLEN_6 0x20 #define UART01x_LCRH_WLEN_5 0x00 -#define UART01x_LCRH_FEN 0x10 -#define UART01x_LCRH_STP2 0x08 -#define UART01x_LCRH_EPS 0x04 -#define UART01x_LCRH_PEN 0x02 -#define UART01x_LCRH_BRK 0x01 +#define UART01x_LCRH_FEN BIT(4) +#define UART01x_LCRH_STP2 BIT(3) +#define UART01x_LCRH_EPS BIT(2) +#define UART01x_LCRH_PEN BIT(1) +#define UART01x_LCRH_BRK BIT(0) #define ST_UART011_DMAWM_RX_1 (0 << 3) #define ST_UART011_DMAWM_RX_2 (1 << 3) @@ -144,10 +145,10 @@ #define ST_UART011_DMAWM_TX_32 5 #define ST_UART011_DMAWM_TX_48 6 -#define UART010_IIR_RTIS 0x08 -#define UART010_IIR_TIS 0x04 -#define UART010_IIR_RIS 0x02 -#define UART010_IIR_MIS 0x01 +#define UART010_IIR_RTIS BIT(3) +#define UART010_IIR_TIS BIT(2) +#define UART010_IIR_RIS BIT(1) +#define UART010_IIR_MIS BIT(0) #define UART011_IFLS_RX1_8 (0 << 3) #define UART011_IFLS_RX2_8 (1 << 3) @@ -163,45 +164,45 @@ #define UART011_IFLS_RX_HALF (5 << 3) #define UART011_IFLS_TX_HALF (5 << 0) -#define UART011_OEIM (1 << 10) /* overrun error interrupt mask */ -#define UART011_BEIM (1 << 9) /* break error interrupt mask */ -#define UART011_PEIM (1 << 8) /* parity error interrupt mask */ -#define UART011_FEIM (1 << 7) /* framing error interrupt mask */ -#define UART011_RTIM (1 << 6) /* receive timeout interrupt mask */ -#define UART011_TXIM (1 << 5) /* transmit interrupt mask */ -#define UART011_RXIM (1 << 4) /* receive interrupt mask */ -#define UART011_DSRMIM (1 << 3) /* DSR interrupt mask */ -#define UART011_DCDMIM (1 << 2) /* DCD interrupt mask */ -#define UART011_CTSMIM (1 << 1) /* CTS interrupt mask */ -#define UART011_RIMIM (1 << 0) /* RI interrupt mask */ - -#define UART011_OEIS (1 << 10) /* overrun error interrupt status */ -#define UART011_BEIS (1 << 9) /* break error interrupt status */ -#define UART011_PEIS (1 << 8) /* parity error interrupt status */ -#define UART011_FEIS (1 << 7) /* framing error interrupt status */ -#define UART011_RTIS (1 << 6) /* receive timeout interrupt status */ -#define UART011_TXIS (1 << 5) /* transmit interrupt status */ -#define UART011_RXIS (1 << 4) /* receive interrupt status */ -#define UART011_DSRMIS (1 << 3) /* DSR interrupt status */ -#define UART011_DCDMIS (1 << 2) /* DCD interrupt status */ -#define UART011_CTSMIS (1 << 1) /* CTS interrupt status */ -#define UART011_RIMIS (1 << 0) /* RI interrupt status */ - -#define UART011_OEIC (1 << 10) /* overrun error interrupt clear */ -#define UART011_BEIC (1 << 9) /* break error interrupt clear */ -#define UART011_PEIC (1 << 8) /* parity error interrupt clear */ -#define UART011_FEIC (1 << 7) /* framing error interrupt clear */ -#define UART011_RTIC (1 << 6) /* receive timeout interrupt clear */ -#define UART011_TXIC (1 << 5) /* transmit interrupt clear */ -#define UART011_RXIC (1 << 4) /* receive interrupt clear */ -#define UART011_DSRMIC (1 << 3) /* DSR interrupt clear */ -#define UART011_DCDMIC (1 << 2) /* DCD interrupt clear */ -#define UART011_CTSMIC (1 << 1) /* CTS interrupt clear */ -#define UART011_RIMIC (1 << 0) /* RI interrupt clear */ - -#define UART011_DMAONERR (1 << 2) /* disable dma on error */ -#define UART011_TXDMAE (1 << 1) /* enable transmit dma */ -#define UART011_RXDMAE (1 << 0) /* enable receive dma */ +#define UART011_OEIM BIT(10) /* overrun error interrupt mask */ +#define UART011_BEIM BIT(9) /* break error interrupt mask */ +#define UART011_PEIM BIT(8) /* parity error interrupt mask */ +#define UART011_FEIM BIT(7) /* framing error interrupt mask */ +#define UART011_RTIM BIT(6) /* receive timeout interrupt mask */ +#define UART011_TXIM BIT(5) /* transmit interrupt mask */ +#define UART011_RXIM BIT(4) /* receive interrupt mask */ +#define UART011_DSRMIM BIT(3) /* DSR interrupt mask */ +#define UART011_DCDMIM BIT(2) /* DCD interrupt mask */ +#define UART011_CTSMIM BIT(1) /* CTS interrupt mask */ +#define UART011_RIMIM BIT(0) /* RI interrupt mask */ + +#define UART011_OEIS BIT(10) /* overrun error interrupt status */ +#define UART011_BEIS BIT(9) /* break error interrupt status */ +#define UART011_PEIS BIT(8) /* parity error interrupt status */ +#define UART011_FEIS BIT(7) /* framing error interrupt status */ +#define UART011_RTIS BIT(6) /* receive timeout interrupt status */ +#define UART011_TXIS BIT(5) /* transmit interrupt status */ +#define UART011_RXIS BIT(4) /* receive interrupt status */ +#define UART011_DSRMIS BIT(3) /* DSR interrupt status */ +#define UART011_DCDMIS BIT(2) /* DCD interrupt status */ +#define UART011_CTSMIS BIT(1) /* CTS interrupt status */ +#define UART011_RIMIS BIT(0) /* RI interrupt status */ + +#define UART011_OEIC BIT(10) /* overrun error interrupt clear */ +#define UART011_BEIC BIT(9) /* break error interrupt clear */ +#define UART011_PEIC BIT(8) /* parity error interrupt clear */ +#define UART011_FEIC BIT(7) /* framing error interrupt clear */ +#define UART011_RTIC BIT(6) /* receive timeout interrupt clear */ +#define UART011_TXIC BIT(5) /* transmit interrupt clear */ +#define UART011_RXIC BIT(4) /* receive interrupt clear */ +#define UART011_DSRMIC BIT(3) /* DSR interrupt clear */ +#define UART011_DCDMIC BIT(2) /* DCD interrupt clear */ +#define UART011_CTSMIC BIT(1) /* CTS interrupt clear */ +#define UART011_RIMIC BIT(0) /* RI interrupt clear */ + +#define UART011_DMAONERR BIT(2) /* disable dma on error */ +#define UART011_TXDMAE BIT(1) /* enable transmit dma */ +#define UART011_RXDMAE BIT(0) /* enable receive dma */ #define UART01x_RSR_ANY (UART01x_RSR_OE | UART01x_RSR_BE | UART01x_RSR_PE | UART01x_RSR_FE) #define UART01x_FR_MODEM_ANY (UART01x_FR_DCD | UART01x_FR_DSR | UART01x_FR_CTS) -- 2.41.0
