Linux Samsung SOC

• Thread Index

• Re: [PATCH 3/6] drm/exynos/hdmi: expose HDMI-PHY clock as pipeline clock
  • From: Inki Dae <daeinki@xxxxxxxxx>
• Re: [PATCH v5 1/5] drm: add generic zpos property
  • From: Tobias Jakobi <tjakobi@xxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v4] media: vb2-dma-contig: configure DMA max segment size properly
  • From: Mauro Carvalho Chehab <mchehab@xxxxxxxxxxxxxxx>
• Re: [PATCH v5 1/5] drm: add generic zpos property
  • From: Daniel Vetter <daniel@xxxxxxxx>
• Re: [PATCH v5 1/5] drm: add generic zpos property
  • From: Benjamin Gaignard <benjamin.gaignard@xxxxxxxxxx>
• Re: [RFC PATCH] drm/exynos: fix pending update handling
  • From: Andrzej Hajda <a.hajda@xxxxxxxxxxx>
• Re: [RFC v2 00/13] usb/mmc/power: Fix USB/LAN when TFTP booting
  • From: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
• Re: [PATCH v6 0/9] mfd: max8997: Add regmap support
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• [PATCH] ARM: dts: exynos: Only Odroid XU3-family boards use DTSI with CPU thermal nodes
  • From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
• Re: [PATCH v4] media: vb2-dma-contig: configure DMA max segment size properly
  • From: Marek Szyprowski <m.szyprowski@xxxxxxxxxxx>
• [PATCH v2 02/22] dt-bindings: clock: Add PWM and USB clock IDs to Exynos5410
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• [PATCH v2 04/22] clk: samsung: exynos5410: Provide fin_pll external fixed clock
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• [PATCH v2 03/22] ARM: dts: exynos: Add fin_pll node for clock driver
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• [PATCH v2 05/22] ARM: dts: exynos: Switch MCT node to a new fin_pll clock
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• [PATCH v2 06/22] ARM: dts: exynos: Remove old fixed-clock provider on SMDK5410
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• [PATCH v2 07/22] clk: samsung: exynos5410: Rename fin_pll from temporary to regular name
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• [PATCH v2 08/22] clk: samsung: exynos5410: Add serial3, USB and PWM clocks
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• [PATCH v2 09/22] ARM: dts: exynos: Re-order alphabetically Exynos5420 SD0/SD1 pinctrl nodes
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• [PATCH v2 11/22] ARM: dts: exynos: Configure Exynos5410 pinctrl for eMMC and SD card
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• [PATCH v2 10/22] ARM: dts: exynos: Use lowercase for Exynos5410 CPU node labels
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• [PATCH v2 12/22] ARM: dts: exynos: Split Odroid XU3 LEDs to separate DTSI
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• [PATCH v2 13/22] ARM: dts: exynos: Move common nodes to exynos5.dtsi
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• [PATCH v2 14/22] ARM: dts: exynos: Prepare for inclusion of exynos5.dtsi in exynos5410.dtsi
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• [PATCH v2 15/22] ARM: dts: exynos: Use phandle to get parent node in exynos5250-snow
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• [PATCH v2 17/22] ARM: dts: exynos: Include common exynos5 in exynos5410.dtsi
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• [PATCH v2 19/22] ARM: dts: exynos: MCT is not an interrupt controller and extend length of iomap
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• [PATCH v2 20/22] ARM: dts: exynos: Move common Exynos5410/542x/5800 nodes to new DTSI
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• [PATCH v2 21/22] ARM: dts: exynos: Add USB to Exynos5410
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• [PATCH v2 22/22] ARM: dts: exynos: Add initial support for Odroid XU board
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• [PATCH v2 18/22] ARM: dts: exynos: Enable UART3 on Exynos5410
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• [PATCH v2 01/22] dt-bindings: clock: Add license and reformat Exynos5410 clock IDs
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• [PATCH v2 00/22] ARM: dts: exynos: Add initial support for Odroid XU
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• [PATCH] clk: samsung: exynos5420: Remove useless check for return value of samsung_clk_init
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• [GIT PULL] ARM: dts: exynos: Non-critical fixes for v4.7
  • From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
• Re: [RFC PATCH] drm/exynos: fix pending update handling
  • From: Tobias Jakobi <tjakobi@xxxxxxxxxxxxxxxxxxxxx>
• Re: [RFC PATCH 05/12] ARM: dts: exynos: Configure Exynos5410 pinctrl for eMMC and SD card
  • From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
• Re: [PATCH v6 6/9] rtc: max8997: Check for ERRNO of regmap_irq_get_virq()
  • From: Alexandre Belloni <alexandre.belloni@xxxxxxxxxxxxxxxxxx>
• Re: [RFC PATCH 05/12] ARM: dts: exynos: Configure Exynos5410 pinctrl for eMMC and SD card
  • From: Alim Akhtar <alim.akhtar@xxxxxxxxx>
• Re: [PATCH v4] media: vb2-dma-contig: configure DMA max segment size properly
  • From: Mauro Carvalho Chehab <mchehab@xxxxxxxxxxxxxxx>
• Re: [PATCH] ARM: dts: exynos: Add MFC memory banks for Peach boards
  • From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
• Re: [PATCH] ARM: dts: exynos: Add MFC memory banks for Peach boards
  • From: Javier Martinez Canillas <javier@xxxxxxxxxxxxxxx>
• Re: [PATCH] ARM: dts: exynos: Add MFC memory banks for Peach boards
  • From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
• Re: [PATCH] ARM: dts: exynos: Add MFC memory banks for Peach boards
  • From: Javier Martinez Canillas <javier@xxxxxxxxxxxxxxx>
• Re: [RFC v2 00/13] usb/mmc/power: Fix USB/LAN when TFTP booting
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: drm/exynos: fimd: pagefault when restarting X
  • From: Andrzej Hajda <a.hajda@xxxxxxxxxxx>
• Re: [PATCH v6 2/9] mfd: max8997: Use regmap to access registers
  • From: Jacek Anaszewski <j.anaszewski@xxxxxxxxxxx>
• [RFC PATCH] drm/exynos: fix pending update handling
  • From: Andrzej Hajda <a.hajda@xxxxxxxxxxx>
• Re: drm/exynos: fimd: pagefault when restarting X
  • From: Tobias Jakobi <tjakobi@xxxxxxxxxxxxxxxxxxxxx>
• [PATCH v6 7/9] extcon: max8997: Fix inconsistent indenting
  • From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
• [PATCH v6 4/9] mfd: max8997: Change irq names to upper case
  • From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
• [PATCH v6 9/9] ARM: dts: exynos: Add interrupt line to MAX8997 PMIC on exynos4210-trats
  • From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
• [PATCH v6 6/9] rtc: max8997: Check for ERRNO of regmap_irq_get_virq()
  • From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
• [PATCH v6 2/9] mfd: max8997: Use regmap to access registers
  • From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
• [PATCH v6 8/9] ARM: dts: exynos: Fix regulator name to avoid forbidden character on exynos4210-trats
  • From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
• [PATCH v6 3/9] mfd: max8997: handle IRQs using regmap
  • From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
• [PATCH v6 5/9] extcon: max8997: Fix handling error code of regmap_irq_get_virq()
  • From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
• [PATCH v6 1/9] input: max8997-haptic: Fix NULL pointer dereference
  • From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
• Re: [RFC v2 00/13] usb/mmc/power: Fix USB/LAN when TFTP booting
  • From: Peter Chen <hzpeterchen@xxxxxxxxx>
• [PATCH v6 1/9] input: max8997-haptic: Fix NULL pointer dereference
  • From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
• [PATCH v6 0/9] mfd: max8997: Add regmap support
  • From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
• Re: drm/exynos: fimd: pagefault when restarting X
  • From: Andrzej Hajda <a.hajda@xxxxxxxxxxx>
• Re: [RFC v2 13/13] ARM: dts: exynos: Fix LAN and HUB after bootloader initialization on Odroid U3
  • From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
• Re: [RFC v2 11/13] usb: port: Parse pwrseq phandle from Device Tree
  • From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
• Re: [RFC v2 09/13] power: pwrseq: Add support for USB hubs with external power
  • From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
• Re: [RFC v2 07/13] power: pwrseq: simple: Add support for toggling regulator
  • From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
• Re: [RFC v2 05/13] power: pwrseq: Remove mmc prefix from mmc_pwrseq
  • From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
• Re: [RFC v2 02/13] power/mmc: Move pwrseq drivers to power/pwrseq
  • From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
• Re: [RFC v2 01/13] usb: misc: usb3503: Clean up on driver unbind
  • From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
• Re: [RFC v2 00/13] usb/mmc/power: Fix USB/LAN when TFTP booting
  • From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
• Re: [RFC v2 00/13] usb/mmc/power: Fix USB/LAN when TFTP booting
  • From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
• Re: [RFC v2 00/13] usb/mmc/power: Fix USB/LAN when TFTP booting
  • From: Peter Chen <hzpeterchen@xxxxxxxxx>
• Re: [PATCH] drm/exynos: fimd: harden fimd_calc_clkdiv()
  • From: Andrzej Hajda <a.hajda@xxxxxxxxxxx>
• Re: [RFC v2 00/13] usb/mmc/power: Fix USB/LAN when TFTP booting
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [RFC v2 13/13] ARM: dts: exynos: Fix LAN and HUB after bootloader initialization on Odroid U3
  • From: Javier Martinez Canillas <javier@xxxxxxxxxxxxxxx>
• Re: [RFC v2 12/13] ARM: dts: exynos: Switch the buck8 to GPIO mode on Odroid U3
  • From: Javier Martinez Canillas <javier@xxxxxxxxxxxxxxx>
• Re: [RFC v2 11/13] usb: port: Parse pwrseq phandle from Device Tree
  • From: Javier Martinez Canillas <javier@xxxxxxxxxxxxxxx>
• Re: [RFC v2 10/13] usb: hub: Power sequence the ports on activation
  • From: Javier Martinez Canillas <javier@xxxxxxxxxxxxxxx>
• Re: [RFC v2 09/13] power: pwrseq: Add support for USB hubs with external power
  • From: Javier Martinez Canillas <javier@xxxxxxxxxxxxxxx>
• Re: [RFC v2 08/13] usb: hub: Handle deferred probe
  • From: Javier Martinez Canillas <javier@xxxxxxxxxxxxxxx>
• Re: [RFC v2 07/13] power: pwrseq: simple: Add support for toggling regulator
  • From: Javier Martinez Canillas <javier@xxxxxxxxxxxxxxx>
• Re: [RFC v2 06/13] power: pwrseq: Generalize mmc_pwrseq operations by removing mmc prefix
  • From: Javier Martinez Canillas <javier@xxxxxxxxxxxxxxx>
• Re: [RFC v2 05/13] power: pwrseq: Remove mmc prefix from mmc_pwrseq
  • From: Javier Martinez Canillas <javier@xxxxxxxxxxxxxxx>
• Re: [RFC v2 04/13] power: pwrseq: Enable COMPILE_TEST for drivers
  • From: Javier Martinez Canillas <javier@xxxxxxxxxxxxxxx>
• Re: [RFC v2 03/13] MAINTAINERS: Retain Ulf Hansson as the same maintainer of pwrseq
  • From: Javier Martinez Canillas <javier@xxxxxxxxxxxxxxx>
• Re: [RFC v2 02/13] power/mmc: Move pwrseq drivers to power/pwrseq
  • From: Javier Martinez Canillas <javier@xxxxxxxxxxxxxxx>
• Re: [RFC v2 01/13] usb: misc: usb3503: Clean up on driver unbind
  • From: Javier Martinez Canillas <javier@xxxxxxxxxxxxxxx>
• Re: [RFC v2 10/13] usb: hub: Power sequence the ports on activation
  • From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
• drm/exynos: fimd: pagefault when restarting X
  • From: Tobias Jakobi <tjakobi@xxxxxxxxxxxxxxxxxxxxx>
• [PATCH] drm/exynos: fimd: harden fimd_calc_clkdiv()
  • From: Tobias Jakobi <tjakobi@xxxxxxxxxxxxxxxxxxxxx>
• Re: drm/exynos: fimd: vrefresh is zero
  • From: Tobias Jakobi <tjakobi@xxxxxxxxxxxxxxxxxxxxx>
• Re: [RFC v2 10/13] usb: hub: Power sequence the ports on activation
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• [RFC v2 02/13] power/mmc: Move pwrseq drivers to power/pwrseq
  • From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
• [RFC v2 00/13] usb/mmc/power: Fix USB/LAN when TFTP booting
  • From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
• [RFC v2 03/13] MAINTAINERS: Retain Ulf Hansson as the same maintainer of pwrseq
  • From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
• [RFC v2 01/13] usb: misc: usb3503: Clean up on driver unbind
  • From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
• [RFC v2 04/13] power: pwrseq: Enable COMPILE_TEST for drivers
  • From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
• [RFC v2 05/13] power: pwrseq: Remove mmc prefix from mmc_pwrseq
  • From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
• [RFC v2 09/13] power: pwrseq: Add support for USB hubs with external power
  • From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
• [RFC v2 07/13] power: pwrseq: simple: Add support for toggling regulator
  • From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
• [RFC v2 06/13] power: pwrseq: Generalize mmc_pwrseq operations by removing mmc prefix
  • From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
• [RFC v2 08/13] usb: hub: Handle deferred probe
  • From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
• [RFC v2 12/13] ARM: dts: exynos: Switch the buck8 to GPIO mode on Odroid U3
  • From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
• [RFC v2 11/13] usb: port: Parse pwrseq phandle from Device Tree
  • From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
• [RFC v2 10/13] usb: hub: Power sequence the ports on activation
  • From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
• [RFC v2 13/13] ARM: dts: exynos: Fix LAN and HUB after bootloader initialization on Odroid U3
  • From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
• Re: drm/exynos: fimd: vrefresh is zero
  • From: Andrzej Hajda <a.hajda@xxxxxxxxxxx>
• Re: drm/exynos: fimd: vrefresh is zero
  • From: Andrzej Hajda <a.hajda@xxxxxxxxxxx>
• Re: [RFT PATCH 1/3] usb: misc: usb3503: Fix HUB mode after bootloader initialization
  • From: Mark Brown <broonie@xxxxxxxxxx>
• [PATCH v2] drm/exynos: fix cancel page flip code
  • From: Andrzej Hajda <a.hajda@xxxxxxxxxxx>
• Re: [PATCH v3 3/3] ARM: dts: exynos: Lower SD card interface voltage to 2.8 V on Odroid X/X2/U3
  • From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
• [GIT PULL] ARM: dts: exynos: Devfreq for v4.7
  • From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
• Re: [PATCH v3 3/3] ARM: dts: exynos: Lower SD card interface voltage to 2.8 V on Odroid X/X2/U3
  • From: Javier Martinez Canillas <javier@xxxxxxxxxxxxxxx>
• [PATCH v3 2/3] ARM: dts: exynos: Define vqmmc for eMMC card on Odroid X/X2/U3
  • From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
• [PATCH v3 3/3] ARM: dts: exynos: Lower SD card interface voltage to 2.8 V on Odroid X/X2/U3
  • From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
• [PATCH v3 1/3] ARM: dts: exynos: Define vqmmc for SD card and allow disabling regulators on Odroid X/X2/U3
  • From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
• Re: [RFT PATCH 1/3] usb: misc: usb3503: Fix HUB mode after bootloader initialization
  • From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
• Re: [PATCH] drm/exynos: fix cancel page flip code
  • From: Daniel Stone <daniel@xxxxxxxxxxxxx>
• Re: [PATCH] drm/exynos: fix cancel page flip code
  • From: Andrzej Hajda <a.hajda@xxxxxxxxxxx>
• Re: [PATCH 3/6] drm/exynos/hdmi: expose HDMI-PHY clock as pipeline clock
  • From: Andrzej Hajda <a.hajda@xxxxxxxxxxx>
• [PATCH v4] media: vb2-dma-contig: configure DMA max segment size properly
  • From: Marek Szyprowski <m.szyprowski@xxxxxxxxxxx>
• Re: [PATCH v3] media: vb2-dma-contig: configure DMA max segment size properly
  • From: Marek Szyprowski <m.szyprowski@xxxxxxxxxxx>
• Re: [PATCH v3] media: vb2-dma-contig: configure DMA max segment size properly
  • From: Hans Verkuil <hverkuil@xxxxxxxxx>
• Re: [PATCH v3] media: vb2-dma-contig: configure DMA max segment size properly
  • From: Marek Szyprowski <m.szyprowski@xxxxxxxxxxx>
• Re: [PATCH v3] media: vb2-dma-contig: configure DMA max segment size properly
  • From: Hans Verkuil <hverkuil@xxxxxxxxx>
• Re: [RFT PATCH 1/3] usb: misc: usb3503: Fix HUB mode after bootloader initialization
  • From: Rob Herring <robh@xxxxxxxxxx>
• [RFC PATCH 01/12] dt-bindings: clock: Add license and reformat Exynos5410 clock IDs
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• [RFC PATCH 02/12] dt-bindings: clock: Add PWM clock ID to Exynos5410
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• [RFC PATCH 03/12] ARM: dts: exynos: Re-order alphabetically Exynos5420 SD0/SD1 pinctrl nodes
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• [RFC PATCH 04/12] ARM: dts: exynos: Use lowercase for Exynos5410 CPU node labels
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• [RFC PATCH 05/12] ARM: dts: exynos: Configure Exynos5410 pinctrl for eMMC and SD card
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• [RFC PATCH 06/12] ARM: dts: exynos: Split Odroid XU3 LEDs to separate DTSI
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• [RFC PATCH 07/12] ARM: dts: exynos: Move common nodes to exynos5.dtsi
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• [RFC PATCH 08/12] ARM: dts: exynos: Prepare for inclusion of exynos5.dtsi in exynos5410.dtsi
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• [RFC PATCH 12/12] ARM: dts: exynos: Enable UART3 on Exynos5410
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• [RFC PATCH 11/12] ARM: dts: exynos: Include common exynos5 in exynos5410.dtsi
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• [RFC PATCH 09/12] ARM: dts: exynos: Use phandle to get parent node in exynos5250-snow
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• [RFC PATCH 00/12] ARM: dts: exynos: Reorganize before adding Odroid XU board
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH v2 0/8] PM / devfreq: Add NoCP devfreq-event and support busfreq on exyno5422-odroidxu3
  • From: Chanwoo Choi <cw00.choi@xxxxxxxxxxx>
• Re: [PATCH v2 0/8] PM / devfreq: Add NoCP devfreq-event and support busfreq on exyno5422-odroidxu3
  • From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
• Re: [PATCH v9 00/20] PM / devferq: Add generic exynos bus frequency driver and new passive governor
  • From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
• Re: Watchdog reset trigger for eMMC
  • From: Anand Moon <linux.amoon@xxxxxxxxx>
• Re: Fwd: [PATCH v2 0/8] PM / devfreq: Add NoCP devfreq-event and support busfreq on exyno5422-odroidxu3
  • From: Chanwoo Choi <cw00.choi@xxxxxxxxxxx>
• Re: drm/exynos: fimd: vrefresh is zero
  • From: Daniel Vetter <daniel@xxxxxxxx>
• Re: drm/exynos: fimd: vrefresh is zero
  • From: Tobias Jakobi <tjakobi@xxxxxxxxxxxxxxxxxxxxx>
• Re: drm/exynos: fimd: vrefresh is zero
  • From: Daniel Vetter <daniel@xxxxxxxx>
• Re: drm/exynos: fimd: vrefresh is zero
  • From: Tobias Jakobi <tjakobi@xxxxxxxxxxxxxxxxxxxxx>
• Re: drm/exynos: fimd: vrefresh is zero
  • From: Alex Deucher <alexdeucher@xxxxxxxxx>
• Re: [RFT PATCH 0/3] usb: misc: usb3503: Fix missing device when TFTP booting
  • From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
• Re: [RFT PATCH 0/3] usb: misc: usb3503: Fix missing device when TFTP booting
  • From: Hans Verkuil <hverkuil@xxxxxxxxx>
• Re: [PATCH 2/2] media: s3c-camif: fix deadlock on driver probe()
  • From: Hans Verkuil <hverkuil@xxxxxxxxx>
• Re: [PATCH v3] media: vb2-dma-contig: configure DMA max segment size properly
  • From: Hans Verkuil <hverkuil@xxxxxxxxx>
• Re: [PATCH v3] media: vb2-dma-contig: configure DMA max segment size properly
  • From: Sakari Ailus <sakari.ailus@xxxxxx>
• Re: [PATCH v3] serial: samsung: Reorder the sequence of clock control when call s3c24xx_serial_set_termios()
  • From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
• Re: [PATCH 1/2] media: exynos4-is: fix deadlock on driver probe
  • From: Hans Verkuil <hverkuil@xxxxxxxxx>
• [PATCH v3] media: vb2-dma-contig: configure DMA max segment size properly
  • From: Marek Szyprowski <m.szyprowski@xxxxxxxxxxx>
• Re: [RFT PATCH 1/3] usb: misc: usb3503: Fix HUB mode after bootloader initialization
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH 1/2] media: exynos4-is: fix deadlock on driver probe
  • From: Mauro Carvalho Chehab <mchehab@xxxxxxxxxxxxxxx>
• Re: [RFT PATCH 1/3] usb: misc: usb3503: Fix HUB mode after bootloader initialization
  • From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
• Re: [RFT PATCH 1/3] usb: misc: usb3503: Fix HUB mode after bootloader initialization
  • From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
• Re: [PATCH v2] media: vb2-dma-contig: configure DMA max segment size properly
  • From: Hans Verkuil <hverkuil@xxxxxxxxx>
• Re: Watchdog reset trigger for eMMC
  • From: Marek Szyprowski <m.szyprowski@xxxxxxxxxxx>
• Re: Fwd: [PATCH v2 0/8] PM / devfreq: Add NoCP devfreq-event and support busfreq on exyno5422-odroidxu3
  • From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
• Re: Fwd: [PATCH v2 0/8] PM / devfreq: Add NoCP devfreq-event and support busfreq on exyno5422-odroidxu3
  • From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
• Re: Fwd: [PATCH v2 0/8] PM / devfreq: Add NoCP devfreq-event and support busfreq on exyno5422-odroidxu3
  • From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
• Re: [RFT PATCH 0/3] usb: misc: usb3503: Fix missing device when TFTP booting
  • From: Marek Szyprowski <m.szyprowski@xxxxxxxxxxx>
• Fwd: [PATCH v2 0/8] PM / devfreq: Add NoCP devfreq-event and support busfreq on exyno5422-odroidxu3
  • From: MyungJoo Ham <myungjoo.ham@xxxxxxxxxxx>
• Re: [PATCH 1/2] media: exynos4-is: fix deadlock on driver probe
  • From: Hans Verkuil <hverkuil@xxxxxxxxx>
• Re: [PATCH 1/2] media: exynos4-is: fix deadlock on driver probe
  • From: Sakari Ailus <sakari.ailus@xxxxxxxxxxxxxxx>
• Re: [RFT PATCH 0/3] usb: misc: usb3503: Fix missing device when TFTP booting
  • From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
• Re: [RFT PATCH 0/3] usb: misc: usb3503: Fix missing device when TFTP booting
  • From: Hans Verkuil <hverkuil@xxxxxxxxx>
• Re: [RFT PATCH 0/3] usb: misc: usb3503: Fix missing device when TFTP booting
  • From: Hans Verkuil <hverkuil@xxxxxxxxx>
• Re: [RFT PATCH 0/3] usb: misc: usb3503: Fix missing device when TFTP booting
  • From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
• drm/exynos: fimd: vrefresh is zero
  • From: Tobias Jakobi <tjakobi@xxxxxxxxxxxxxxxxxxxxx>
• Re: [RFT PATCH 0/3] usb: misc: usb3503: Fix missing device when TFTP booting
  • From: Hans Verkuil <hverkuil@xxxxxxxxx>
• Watchdog reset trigger for eMMC
  • From: Anand Moon <linux.amoon@xxxxxxxxx>
• Re: [RFT PATCH 1/3] usb: misc: usb3503: Fix HUB mode after bootloader initialization
  • From: Mark Brown <broonie@xxxxxxxxxx>
• [PATCHv16 13/13] vivid: add CEC emulation
  • From: Hans Verkuil <hverkuil@xxxxxxxxx>
• Re: [PATCH v2] media: vb2-dma-contig: configure DMA max segment size properly
  • From: Sakari Ailus <sakari.ailus@xxxxxx>
• [PATCHv16 07/13] cec.txt: add CEC framework documentation
  • From: Hans Verkuil <hverkuil@xxxxxxxxx>
• [PATCHv16 09/13] cec: adv7604: add cec support.
  • From: Hans Verkuil <hverkuil@xxxxxxxxx>
• [PATCHv16 12/13] cec: s5p-cec: Add s5p-cec driver
  • From: Hans Verkuil <hverkuil@xxxxxxxxx>
• [PATCHv16 11/13] cec: adv7511: add cec support.
  • From: Hans Verkuil <hverkuil@xxxxxxxxx>
• [PATCHv16 10/13] cec: adv7842: add cec support
  • From: Hans Verkuil <hverkuil@xxxxxxxxx>
• [PATCHv16 08/13] DocBook/media: add CEC documentation
  • From: Hans Verkuil <hverkuil@xxxxxxxxx>
• [PATCHv16 05/13] cec/TODO: add TODO file so we know why this is still in staging
  • From: Hans Verkuil <hverkuil@xxxxxxxxx>
• [PATCHv16 06/13] cec: add compat32 ioctl support
  • From: Hans Verkuil <hverkuil@xxxxxxxxx>
• [PATCHv16 03/13] rc: Add HDMI CEC protocol handling
  • From: Hans Verkuil <hverkuil@xxxxxxxxx>
• [PATCHv16 02/13] HID: add HDMI CEC specific keycodes
  • From: Hans Verkuil <hverkuil@xxxxxxxxx>
• [PATCHv16 01/13] input.h: add BUS_CEC type
  • From: Hans Verkuil <hverkuil@xxxxxxxxx>
• [PATCHv16 00/13] HDMI CEC framework
  • From: Hans Verkuil <hverkuil@xxxxxxxxx>
• Re: [PATCH] ARM: exynos_defconfig: Disable big.LITTLE switcher
  • From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
• Re: [PATCH 0/3] phy: exynos-mipi-video: add support for Exynos 54xx SoCs
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• Re: [GIT PULL 1/3] ARM: dts: exynos: Secound round of DTS for v4.7
  • From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
• Re: [RFT PATCH 1/3] usb: misc: usb3503: Fix HUB mode after bootloader initialization
  • From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
• Re: [PATCH v2] media: vb2-dma-contig: configure DMA max segment size properly
  • From: Marek Szyprowski <m.szyprowski@xxxxxxxxxxx>
• Applied "regulator: max77686: Configure enable time to properly handle regulator enable" to the regulator tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [RFT PATCH 1/3] usb: misc: usb3503: Fix HUB mode after bootloader initialization
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH v2] media: vb2-dma-contig: configure DMA max segment size properly
  • From: Sakari Ailus <sakari.ailus@xxxxxx>
• [RFT PATCH 2/3] ARM: dts: exynos: Provide regulator for usb3503 on Odroid to fix device detection
  • From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
• [RFT PATCH 0/3] usb: misc: usb3503: Fix missing device when TFTP booting
  • From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
• [PATCH 3/3] regulator: max77686: Configure enable time to properly handle regulator enable
  • From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
• [RFT PATCH 1/3] usb: misc: usb3503: Fix HUB mode after bootloader initialization
  • From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
• Re: [GIT PULL 1/3] ARM: dts: exynos: Secound round of DTS for v4.7
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• [PATCH] ARM: dts: exynos: Add MFC memory banks for Peach boards
  • From: Javier Martinez Canillas <javier@xxxxxxxxxxxxxxx>
• Re: [GIT PULL 1/3] ARM: dts: exynos: Secound round of DTS for v4.7
  • From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
• Re: [PATCH] ARM: exynos_defconfig: Disable big.LITTLE switcher
  • From: Anand Moon <linux.amoon@xxxxxxxxx>
• Re: [GIT PULL 3/3] ARM: drivers: memory: SROM controller for v4.7
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• Re: [PATCH] ARM: exynos_defconfig: Disable big.LITTLE switcher
  • From: Javier Martinez Canillas <javier@xxxxxxxxxxxxxxx>
• Re: [GIT PULL 2/3] ARM: dts: exynos: Fixup for SROM controller (v4.7)
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• Re: [PATCH] ARM: exynos_defconfig: Disable big.LITTLE switcher
  • From: Markus Reichl <m.reichl@xxxxxxxxxxxxx>
• [PATCH] ARM: exynos_defconfig: Disable big.LITTLE switcher
  • From: Bartlomiej Zolnierkiewicz <b.zolnierkie@xxxxxxxxxxx>
• Re: [GIT PULL 1/3] ARM: dts: exynos: Secound round of DTS for v4.7
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• Re: [PATCH v2] media: vb2-dma-contig: configure DMA max segment size properly
  • From: Hans Verkuil <hansverk@xxxxxxxxx>
• Re: [PATCH v2] media: vb2-dma-contig: configure DMA max segment size properly
  • From: Hans Verkuil <hansverk@xxxxxxxxx>
• Re: [PATCH v2] media: vb2-dma-contig: configure DMA max segment size properly
  • From: Marek Szyprowski <m.szyprowski@xxxxxxxxxxx>
• [PATCH v2] media: vb2-dma-contig: configure DMA max segment size properly
  • From: Marek Szyprowski <m.szyprowski@xxxxxxxxxxx>
• Re: [PATCH] media: vb2-dma-contig: configure DMA max segment size properly
  • From: Hans Verkuil <hverkuil@xxxxxxxxx>
• [PATCH] media: vb2-dma-contig: configure DMA max segment size properly
  • From: Marek Szyprowski <m.szyprowski@xxxxxxxxxxx>
• Re: [PATCH 1/2] PM / OPP: Remove OF dependency on dev_pm_opp_of_{cpumask_,}remove_table
  • From: Sudeep Holla <sudeep.holla@xxxxxxx>
• Re: [PATCH 1/2] PM / OPP: Remove OF dependency on dev_pm_opp_of_{cpumask_,}remove_table
  • From: Viresh Kumar <viresh.kumar@xxxxxxxxxx>
• Re: [PATCH 1/2] PM / OPP: Remove OF dependency on dev_pm_opp_of_{cpumask_,}remove_table
  • From: Viresh Kumar <viresh.kumar@xxxxxxxxxx>
• Re: [PATCH 3/7] mfd: max77686: Use devm_mfd_add_devices and devm_regmap_add_irq_chip
  • From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
• [PATCH 1/2] PM / OPP: Remove OF dependency on dev_pm_opp_of_{cpumask_,}remove_table
  • From: Sudeep Holla <sudeep.holla@xxxxxxx>
• [PATCH 1/2] media: exynos4-is: fix deadlock on driver probe
  • From: Marek Szyprowski <m.szyprowski@xxxxxxxxxxx>
• [PATCH 2/2] media: s3c-camif: fix deadlock on driver probe()
  • From: Marek Szyprowski <m.szyprowski@xxxxxxxxxxx>
• Re: [PATCH 3/7] mfd: max77686: Use devm_mfd_add_devices and devm_regmap_add_irq_chip
  • From: Laxman Dewangan <ldewangan@xxxxxxxxxx>
• Re: [PATCH 7/7] mfd: wl1273-core: Use devm_mfd_add_devices() for mfd_device registration
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [PATCH 6/7] mfd: tps65910: Use devm_mfd_add_devices and devm_regmap_add_irq_chip
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [PATCH 5/7] mfd: sec: Use devm_mfd_add_devices and devm_regmap_add_irq_chip
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [PATCH 1/7] mfd: as3722: Use devm_mfd_add_devices and devm_regmap_add_irq_chip
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [PATCH 4/7] mfd: rc5t583: Use devm_mfd_add_devices and devm_request_threaded_irq
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [PATCH 3/7] mfd: max77686: Use devm_mfd_add_devices and devm_regmap_add_irq_chip
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [PATCH 3/7] mfd: max77686: Use devm_mfd_add_devices and devm_regmap_add_irq_chip
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [PATCH v2 2/3] ARM: dts: exynos: Define vqmmc for eMMC card on Odroid X/X2/U3
  • From: Javier Martinez Canillas <javier@xxxxxxxxxxxx>
• Re: [PATCH v2 2/3] ARM: dts: exynos: Define vqmmc for eMMC card on Odroid X/X2/U3
  • From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
• Re: [PATCH v2 2/2] phy: Group vendor specific phy drivers
  • From: Vivek Gautam <gautamvivek1987@xxxxxxxxx>
• Re: [PATCH v2 2/2] phy: Group vendor specific phy drivers
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• Re: [PATCH] crypto: s5p-sss: fix incorrect usage of scatterlists api
  • From: Herbert Xu <herbert@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2 3/3] ARM: dts: exynos: Lower SD card interface voltage to 2.8v on Odroid X/X2/U3
  • From: Javier Martinez Canillas <javier@xxxxxxxxxxxxxxx>
• Re: [PATCH v2 2/3] ARM: dts: exynos: Define vqmmc for eMMC card on Odroid X/X2/U3
  • From: Javier Martinez Canillas <javier@xxxxxxxxxxxxxxx>
• Re: [PATCH v2 1/3] ARM: dts: exynos: Define vqmmc for SD card and allow disabling regulators on Odroid X/X2/U3
  • From: Javier Martinez Canillas <javier@xxxxxxxxxxxxxxx>
• [PATCH v2 1/3] ARM: dts: exynos: Define vqmmc for SD card and allow disabling regulators on Odroid X/X2/U3
  • From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
• [PATCH v2 2/3] ARM: dts: exynos: Define vqmmc for eMMC card on Odroid X/X2/U3
  • From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
• [PATCH v2 3/3] ARM: dts: exynos: Lower SD card interface voltage to 2.8v on Odroid X/X2/U3
  • From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
• Re: [PATCH RESEND 1/2] media: vb2-dma-contig: add helper for setting dma max seg size
  • From: Hans Verkuil <hverkuil@xxxxxxxxx>
• Re: [PATCH RESEND 1/2] media: vb2-dma-contig: add helper for setting dma max seg size
  • From: Marek Szyprowski <m.szyprowski@xxxxxxxxxxx>
• Re: [PATCH RESEND 1/2] media: vb2-dma-contig: add helper for setting dma max seg size
  • From: Hans Verkuil <hverkuil@xxxxxxxxx>
• Re: [PATCH RESEND 1/2] media: vb2-dma-contig: add helper for setting dma max seg size
  • From: Marek Szyprowski <m.szyprowski@xxxxxxxxxxx>
• [PATCH 1/3] ARM: dts: exynos: Define vqmmc for SD card and allow disabling regulators on Odroid X/X2/U3
  • From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
• [PATCH 2/3] ARM: dts: exynos: Define vqmmc for eMMC card on Odroid X/X2/U3
  • From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
• [PATCH 3/3] ARM: dts: exynos: Lower SD card interface voltage to 2.8v on Odroid X/X2/U3
  • From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
• Re: [PATCH RESEND 1/2] media: vb2-dma-contig: add helper for setting dma max seg size
  • From: Hans Verkuil <hverkuil@xxxxxxxxx>
• Re: [PATCH RESEND 2/2] media: set proper max seg size for devices on Exynos SoCs
  • From: Hans Verkuil <hverkuil@xxxxxxxxx>
• [PATCH RESEND 2/2] media: set proper max seg size for devices on Exynos SoCs
  • From: Marek Szyprowski <m.szyprowski@xxxxxxxxxxx>
• [PATCH RESEND 1/2] media: vb2-dma-contig: add helper for setting dma max seg size
  • From: Marek Szyprowski <m.szyprowski@xxxxxxxxxxx>
• [GIT PULL 3/3] ARM: drivers: memory: SROM controller for v4.7
  • From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
• [GIT PULL 1/3] ARM: dts: exynos: Secound round of DTS for v4.7
  • From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
• [GIT PULL 2/3] ARM: dts: exynos: Fixup for SROM controller (v4.7)
  • From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
• [GIT PULL 0/3] ARM: EXYNOS: Second round for v4.7
  • From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
• Re: [GIT PULL] ARM: EXYNOS: fixes for v4.6
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• [GIT PULL] ARM: EXYNOS: fixes for v4.6
  • From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
• Re: [RESEND PATCH v3 1/2] ARM: exynos_defconfig: Enable Samsung media platform drivers as modules
  • From: Javier Martinez Canillas <javier@xxxxxxxxxxxxxxx>
• Re: [PATCH v2] pinctrl-exynos5440: Use off-stack memory for pinctrl_gpio_range
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH v8] drivers: amba: properly handle devices with power domains
  • From: Marek Szyprowski <m.szyprowski@xxxxxxxxxxx>
• [PATCH] [media] exynos-gsc: avoid build warning without CONFIG_OF
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• Re: [PATCH] crypto: s5p-sss: fix incorrect usage of scatterlists api
  • From: Vladimir Zapolskiy <vz@xxxxxxxxx>
• Re: [PATCH] crypto: s5p-sss: fix incorrect usage of scatterlists api
  • From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
• [PATCH] crypto: s5p-sss: fix incorrect usage of scatterlists api
  • From: Marek Szyprowski <m.szyprowski@xxxxxxxxxxx>
• Re: [PATCH v2 2/2] phy: Group vendor specific phy drivers
  • From: Vivek Gautam <gautamvivek1987@xxxxxxxxx>
• Re: [RESEND PATCH v3 1/2] ARM: exynos_defconfig: Enable Samsung media platform drivers as modules
  • From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
• Re: [PATCH v2 3/3] i2c: s3c2410: Cleanup indentation and comment style
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH v2 2/3] i2c: s3c2410: Minor function-level comment cleanup
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH v2 1/3] i2c: s3c2410: Add missing clock unprepare on probe() error path
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH v2 2/2] i2c: s3c2410: Check clk_prepare_enable() return value
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH v2 1/2] i2c: s3c2410: Print errno code in error logs
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [GIT PULL 3/5] arm64: dts: exynos: DT for v4.7
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• Re: [RESEND PATCH v3 2/2] ARM: multi_v7_defconfig: Enable Samsung media platform drivers as modules
  • From: Javier Martinez Canillas <javier@xxxxxxxxxxxxxxx>
• Re: [GIT PULL 5/5] arm64: defconfig for v4.7
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• Re: [GIT PULL 4/5] ARM: defconfig for v4.7
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• Re: [PATCH v3 1/2] ARM: exynos_defconfig: Enable Samsung media platform drivers as modules
  • From: Javier Martinez Canillas <javier@xxxxxxxxxxxxxxx>
• Re: [GIT PULL 1/5] ARM: dts: exynos: Artik5 topic branch for v4.7
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• Re: [PATCH 10/41] Documentation: dt: display: fix spelling mistake
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH 0/7] mfd: Use devm_mfd_add_devices and devm_regmap_add_irq_chip
  • From: Laxman Dewangan <ldewangan@xxxxxxxxxx>
• Re: [PATCH 5/7] mfd: sec: Use devm_mfd_add_devices and devm_regmap_add_irq_chip
  • From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
• [PATCHv15 15/15] cec: add ARC and CDC support
  • From: Hans Verkuil <hverkuil@xxxxxxxxx>
• [PATCHv15 13/15] vivid: add CEC emulation
  • From: Hans Verkuil <hverkuil@xxxxxxxxx>
• [PATCHv15 14/15] pulse8-cec: add new driver
  • From: Hans Verkuil <hverkuil@xxxxxxxxx>
• [PATCHv15 07/15] cec.txt: add CEC framework documentation
  • From: Hans Verkuil <hverkuil@xxxxxxxxx>
• [PATCHv15 06/15] cec: add compat32 ioctl support
  • From: Hans Verkuil <hverkuil@xxxxxxxxx>
• [PATCHv15 03/15] rc: Add HDMI CEC protocol handling
  • From: Hans Verkuil <hverkuil@xxxxxxxxx>
• [PATCHv15 09/15] cec: adv7604: add cec support.
  • From: Hans Verkuil <hverkuil@xxxxxxxxx>
• [PATCHv15 05/15] cec/TODO: add TODO file so we know why this is still in staging
  • From: Hans Verkuil <hverkuil@xxxxxxxxx>
• [PATCHv15 10/15] cec: adv7842: add cec support
  • From: Hans Verkuil <hverkuil@xxxxxxxxx>
• [PATCHv15 08/15] DocBook/media: add CEC documentation
  • From: Hans Verkuil <hverkuil@xxxxxxxxx>
• [PATCHv15 12/15] cec: s5p-cec: Add s5p-cec driver
  • From: Hans Verkuil <hverkuil@xxxxxxxxx>
• [PATCHv15 11/15] cec: adv7511: add cec support.
  • From: Hans Verkuil <hverkuil@xxxxxxxxx>
• [PATCHv15 02/15] HID: add HDMI CEC specific keycodes
  • From: Hans Verkuil <hverkuil@xxxxxxxxx>
• [PATCHv15 01/15] input.h: add BUS_CEC type
  • From: Hans Verkuil <hverkuil@xxxxxxxxx>
• [PATCHv15 00/15] HDMI CEC framework
  • From: Hans Verkuil <hverkuil@xxxxxxxxx>
• [PATCH v1 8/8] drm: bridge: analogix/dp: fix no drm hpd event when panel plug in
  • From: Yakir Yang <ykk@xxxxxxxxxxxxxx>
• [PATCH v1 7/8] drm: rockchip: analogix_dp: correct the connector display color format and bpc
  • From: Yakir Yang <ykk@xxxxxxxxxxxxxx>
• [PATCH v1 6/8] drm/bridge: analogix_dp: introduce connector mode_valid callback to plat driver
  • From: Yakir Yang <ykk@xxxxxxxxxxxxxx>
• [PATCH v1 5/8] drm/rockchip: analogix_dp: make panel detect to an optional action
  • From: Yakir Yang <ykk@xxxxxxxxxxxxxx>
• [PATCH v1 2/8] drm: rockchip: analogix_dp: split the lcdc select setting into device data
  • From: Yakir Yang <ykk@xxxxxxxxxxxxxx>
• [PATCH v1 3/8] drm/rockchip: analogix_dp: add rk3399 eDP support
  • From: Yakir Yang <ykk@xxxxxxxxxxxxxx>
• [PATCH v1 4/8] drm: bridge: analogix_dp: correct the register bit define error in ANALOGIX_DP_PLL_REG_1
  • From: Yakir Yang <ykk@xxxxxxxxxxxxxx>
• [PATCH v1 1/8] drm: bridge: analogix_dp: rename RK3288_DP to ROCKCHIP_DP
  • From: Yakir Yang <ykk@xxxxxxxxxxxxxx>
• [PATCH v1 0/8] Add RK3399 eDP support and fix some bugs to analogix_dp driver.
  • From: Yakir Yang <ykk@xxxxxxxxxxxxxx>
• Re: [PATCH 3/7] mfd: max77686: Use devm_mfd_add_devices and devm_regmap_add_irq_chip
  • From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
• Re: [PATCH 0/7] mfd: Use devm_mfd_add_devices and devm_regmap_add_irq_chip
  • From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
• Re: [PATCH v3 1/2] ARM: exynos_defconfig: Enable Samsung media platform drivers as modules
  • From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
• [PATCH] ARM: dts: exynos: Enable PRNG and SSS for all Exynos4 devices
  • From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
• Re: [PATCH v8] drivers: amba: properly handle devices with power domains
  • From: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
• Re: [GIT PULL 2/5] ARM: dts: exynos: DT for v4.7
  • From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
• Re: [GIT PULL 1/5] ARM: dts: exynos: Artik5 topic branch for v4.7
  • From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
• Re: [PATCH] i2c: s3c2410: fix indentation for better readability
  • From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
• [PATCH 10/41] Documentation: dt: display: fix spelling mistake
  • From: Eric Engestrom <eric@xxxxxxxxxxxx>
• [PATCH] i2c: s3c2410: fix indentation for better readability
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [GIT PULL 2/5] ARM: dts: exynos: DT for v4.7
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• Re: [2/2] i2c: s3c2410: Use SET_NOIRQ_SYSTEM_SLEEP_PM_OPS instead of open-coded
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH 1/2] i2c: exynos5: Use SET_NOIRQ_SYSTEM_SLEEP_PM_OPS instead of open-coded
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [GIT PULL 1/5] ARM: dts: exynos: Artik5 topic branch for v4.7
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• Re: [PATCH v2 2/2] i2c: exynos5: Fix possible ABBA deadlock by keeping I2C clock prepared
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH 2/7] mfd: lp8788: Use devm_mfd_add_devices and devm_regmap_add_irq_chip
  • From: Laxman Dewangan <ldewangan@xxxxxxxxxx>
• [PATCH] ARM: EXYNOS: Properly skip unitialized parent clock in power domain on
  • From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
• Re: [PATCH] ARM: EXYNOS: set clock parents of registered clocks on power-on
  • From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
• Re: [PATCH] drm/exynos/hdmi: Don't print error on deferral due to regulators
  • From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
• Re: [PATCH 2/7] mfd: lp8788: Use devm_mfd_add_devices and devm_regmap_add_irq_chip
  • From: "Kim, Milo" <milo.kim@xxxxxx>
• [PATCH] ARM: EXYNOS: set clock parents of registered clocks on power-on
  • From: Vladimir Zapolskiy <vz@xxxxxxxxx>
• [PATCH] drm/exynos/hdmi: Don't print error on deferral due to regulators
  • From: Javier Martinez Canillas <javier@xxxxxxxxxxxxxxx>
• Re: [PATCH v2] ARM: exynos_defconfig: Enable Samsung media platform drivers as modules
  • From: Javier Martinez Canillas <javier@xxxxxxxxxxxxxxx>
• Re: [PATCH 2/3] drm/exynos: Use VIDEO_SAMSUNG_EXYNOS_GSC=n as GSC Kconfig dependency
  • From: Javier Martinez Canillas <javier@xxxxxxxxxxxxxxx>
• Re: [RFT PATCH v2] [media] exynos4-is: Fix fimc_is_parse_sensor_config() nodes handling
  • From: Javier Martinez Canillas <javier@xxxxxxxxxxxxxxx>
• Re: [PATCH 2/2] ARM: dts: add exynos5420-fimd compatible
  • From: Inki Dae <daeinki@xxxxxxxxx>
• Re: [rtc-linux] [PATCH v2] rtc: s3c: Document in binding that only s3c6410 needs a src clk
  • From: Alexandre Belloni <alexandre.belloni@xxxxxxxxxxxxxxxxxx>
• Re: [rtc-linux] [PATCH v2] rtc: s3c: Document in binding that only s3c6410 needs a src clk
  • From: Javier Martinez Canillas <javier@xxxxxxxxxxxxxxx>
• [PATCH 1/7] mfd: as3722: Use devm_mfd_add_devices and devm_regmap_add_irq_chip
  • From: Laxman Dewangan <ldewangan@xxxxxxxxxx>
• [PATCH 2/7] mfd: lp8788: Use devm_mfd_add_devices and devm_regmap_add_irq_chip
  • From: Laxman Dewangan <ldewangan@xxxxxxxxxx>
• [PATCH 3/7] mfd: max77686: Use devm_mfd_add_devices and devm_regmap_add_irq_chip
  • From: Laxman Dewangan <ldewangan@xxxxxxxxxx>
• [PATCH 4/7] mfd: rc5t583: Use devm_mfd_add_devices and devm_request_threaded_irq
  • From: Laxman Dewangan <ldewangan@xxxxxxxxxx>
• [PATCH 5/7] mfd: sec: Use devm_mfd_add_devices and devm_regmap_add_irq_chip
  • From: Laxman Dewangan <ldewangan@xxxxxxxxxx>
• [PATCH 6/7] mfd: tps65910: Use devm_mfd_add_devices and devm_regmap_add_irq_chip
  • From: Laxman Dewangan <ldewangan@xxxxxxxxxx>
• [PATCH 7/7] mfd: wl1273-core: Use devm_mfd_add_devices() for mfd_device registration
  • From: Laxman Dewangan <ldewangan@xxxxxxxxxx>
• [PATCH 0/7] mfd: Use devm_mfd_add_devices and devm_regmap_add_irq_chip
  • From: Laxman Dewangan <ldewangan@xxxxxxxxxx>
• Re: [PATCH 2/2] ARM: dts: add exynos5420-fimd compatible
  • From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
• [PATCH v3] serial: samsung: Reorder the sequence of clock control when call s3c24xx_serial_set_termios()
  • From: Chanwoo Choi <cw00.choi@xxxxxxxxxxx>
• Re: [PATCH v2 2/2] i2c: s3c2410: Check clk_prepare_enable() return value
  • From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
• Re: [PATCH v2 1/2] i2c: s3c2410: Print errno code in error logs
  • From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
• [PATCH v2 2/3] i2c: s3c2410: Minor function-level comment cleanup
  • From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
• [PATCH v2 3/3] i2c: s3c2410: Cleanup indentation and comment style
  • From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
• [PATCH v2 1/3] i2c: s3c2410: Add missing clock unprepare on probe() error path
  • From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
• Re: [PATCH 2/3] i2c: s3c2410: Minor function-level comment cleanup
  • From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
• [PATCH v2 1/2] i2c: s3c2410: Print errno code in error logs
  • From: Javier Martinez Canillas <javier@xxxxxxxxxxxxxxx>
• [PATCH v2 2/2] i2c: s3c2410: Check clk_prepare_enable() return value
  • From: Javier Martinez Canillas <javier@xxxxxxxxxxxxxxx>
• Re: [PATCH 3/3] i2c: s3c2410: Cleanup indentation and comment style
  • From: Javier Martinez Canillas <javier@xxxxxxxxxxxxxxx>
• Re: [PATCH 2/3] i2c: s3c2410: Minor function-level comment cleanup
  • From: Javier Martinez Canillas <javier@xxxxxxxxxxxxxxx>
• Re: [PATCH 1/3] i2c: s3c2410: Add missing clock unprepare on probe() error path
  • From: Javier Martinez Canillas <javier@xxxxxxxxxxxxxxx>
• Re: [PATCH 1/2] i2c: s3c2410: Print errno code in error logs
  • From: Javier Martinez Canillas <javier@xxxxxxxxxxxxxxx>
• [PATCH 3/3] i2c: s3c2410: Cleanup indentation and comment style
  • From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
• [PATCH 2/3] i2c: s3c2410: Minor function-level comment cleanup
  • From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
• [PATCH 1/3] i2c: s3c2410: Add missing clock unprepare on probe() error path
  • From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
• Re: [PATCH 2/2] i2c: s3c2410: Check clk_prepare_enable() return value
  • From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
• Re: [PATCH 1/2] i2c: s3c2410: Print errno code in error logs
  • From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
• Re: [PATCH v2] pinctrl-exynos5440: Use off-stack memory for pinctrl_gpio_range
  • From: Tomasz Figa <tomasz.figa@xxxxxxxxx>
• Re: [PATCH v2] pinctrl-exynos5440: Use off-stack memory for pinctrl_gpio_range
  • From: Andrew Jeffery <andrew@xxxxxxxx>
• Re: [PATCH v2] pinctrl-exynos5440: Use off-stack memory for pinctrl_gpio_range
  • From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
• [PATCH v2] pinctrl-exynos5440: Use off-stack memory for pinctrl_gpio_range
  • From: Andrew Jeffery <andrew@xxxxxxxx>
• Re: [PATCH] ARM: dts: exynos: Remove unsupported s2mps11 regulator bindings from Exynos5420 boards
  • From: Javier Martinez Canillas <javier@xxxxxxxxxxxxxxx>
• [PATCH 1/2] i2c: s3c2410: Print errno code in error logs
  • From: Javier Martinez Canillas <javier@xxxxxxxxxxxxxxx>
• [PATCH 2/2] i2c: s3c2410: Check clk_prepare_enable() return value
  • From: Javier Martinez Canillas <javier@xxxxxxxxxxxxxxx>
• Re: [PATCH v5 39/50] mtd: nand: omap2: switch to mtd_ooblayout_ops
  • From: Roger Quadros <rogerq@xxxxxx>
• Re: [PATCH v5 39/50] mtd: nand: omap2: switch to mtd_ooblayout_ops
  • From: Boris Brezillon <boris.brezillon@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH v5 39/50] mtd: nand: omap2: switch to mtd_ooblayout_ops
  • From: Roger Quadros <rogerq@xxxxxx>
• Re: [PATCH v5 39/50] mtd: nand: omap2: switch to mtd_ooblayout_ops
  • From: Boris Brezillon <boris.brezillon@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH v5 39/50] mtd: nand: omap2: switch to mtd_ooblayout_ops
  • From: Roger Quadros <rogerq@xxxxxx>
• Re: [PATCH] pinctrl-exynos5440: Use off-stack memory for pinctrl_gpio_range
  • From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
• [PATCH v2] drm/exynos: dsi: use generic of_device_get_match_data helper
  • From: Marek Szyprowski <m.szyprowski@xxxxxxxxxxx>
• Re: [PATCH] pinctrl-exynos5440: Use off-stack memory for pinctrl_gpio_range
  • From: Tomasz Figa <tomasz.figa@xxxxxxxxx>
• Re: [PATCH] ARM: dts: exynos: Remove unsupported s2mps11 regulator bindings from Exynos5420 boards
  • From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
• [PATCH] pinctrl-exynos5440: Use off-stack memory for pinctrl_gpio_range
  • From: Andrew Jeffery <andrew@xxxxxxxx>
• Re: [PATCH] i2c: exynos5: Fix possible ABBA deadlock by keeping I2C clock prepared
  • From: Javier Martinez Canillas <javier@xxxxxxxxxxxxxxx>
• Re: [PATCH v2 1/5] iio: accel: bmc150: use regmap to retrieve struct device
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Applied "regulator: s2mps11: Set default ramp delay for S2MPS11 LDOs" to the regulator tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH v2] regulator: s2mps11: Set default ramp delay for S2MPS11 LDOs
  • From: Javier Martinez Canillas <javier@xxxxxxxxxxxxxxx>
• Re: [PATCH] ARM: dts: exynos: Remove unsupported s2mps11 regulator bindings from Exynos5420 boards
  • From: Javier Martinez Canillas <javier@xxxxxxxxxxxxxxx>
• Re: [PATCH v5 39/50] mtd: nand: omap2: switch to mtd_ooblayout_ops
  • From: Boris Brezillon <boris.brezillon@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2 5/5] iio: gyro: bmg160: use regmap to retrieve struct device
  • From: Srinivas Pandruvada <srinivas.pandruvada@xxxxxxxxxxxxxxx>
• Re: [PATCH v2 1/5] iio: accel: bmc150: use regmap to retrieve struct device
  • From: Srinivas Pandruvada <srinivas.pandruvada@xxxxxxxxxxxxxxx>
• Re: [PATCH v5 39/50] mtd: nand: omap2: switch to mtd_ooblayout_ops
  • From: Roger Quadros <rogerq@xxxxxx>
• [PATCH v2] regulator: s2mps11: Set default ramp delay for S2MPS11 LDOs
  • From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
• Re: [PATCH] i2c: exynos5: Fix possible ABBA deadlock by keeping I2C clock prepared
  • From: Javier Martinez Canillas <javier@xxxxxxxxxxxxxxx>
• Re: [RESPIN v2 0/6] Add support for Exynos SROM Controller driver
  • From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
• RE: [PATCH v2 1/5] iio: accel: bmc150: use regmap to retrieve struct device
  • From: "Tirdea, Irina" <irina.tirdea@xxxxxxxxx>
• Re: [PATCH] regulator: s2mps11: Remove unused set_voltage_time_sel
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH] regulator: s2mps11: Remove unused set_voltage_time_sel
  • From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
• Re: [PATCH] regulator: s2mps11: Remove unused set_voltage_time_sel
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH 2/7] drm/exynos: dsi: use generic of_device_get_match_data helper
  • From: Inki Dae <inki.dae@xxxxxxxxxxx>
• Re: [PATCH] i2c: exynos5: Fix possible ABBA deadlock by keeping I2C clock prepared
  • From: Marek Szyprowski <m.szyprowski@xxxxxxxxxxx>
• [PATCH] ARM: dts: exynos: Remove unsupported s2mps11 regulator bindings from Exynos5420 boards
  • From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
• [PATCH] regulator: s2mps11: Remove unused set_voltage_time_sel
  • From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
• Re: [PATCH v2 4/5] iio: health: afe4404: use regmap to retrieve struct device
  • From: "Andrew F. Davis" <afd@xxxxxx>
• Re: [PATCH v5 13/24] input: misc: max8997: explicitly apply PWM config extracted from pwm_args
  • From: Boris Brezillon <boris.brezillon@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2 2/2] i2c: exynos5: Fix possible ABBA deadlock by keeping I2C clock prepared
  • From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
• Re: [PATCH v2 1/2] i2c: exynos5: Check clk_prepare_enable() return value
  • From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
• Re: [PATCH] i2c: exynos5: Fix possible ABBA deadlock by keeping I2C clock prepared
  • From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
• Re: [PATCH v5 13/24] input: misc: max8997: explicitly apply PWM config extracted from pwm_args
  • From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
• Re: Found a bug in samsung serial tty code
  • From: Woody Wu <narkewoody@xxxxxxxxx>
• Found a bug in samsung serial tty code
  • From: Woody Wu <narkewoody@xxxxxxxxx>
• [PATCH v2 2/2] i2c: exynos5: Fix possible ABBA deadlock by keeping I2C clock prepared
  • From: Javier Martinez Canillas <javier@xxxxxxxxxxxxxxx>
• [PATCH v2 1/2] i2c: exynos5: Check clk_prepare_enable() return value
  • From: Javier Martinez Canillas <javier@xxxxxxxxxxxxxxx>
• Re: [PATCH] i2c: exynos5: Fix possible ABBA deadlock by keeping I2C clock prepared
  • From: Javier Martinez Canillas <javier@xxxxxxxxxxxxxxx>
• Re: [PATCH] i2c: exynos5: Fix possible ABBA deadlock by keeping I2C clock prepared
  • From: Javier Martinez Canillas <javier@xxxxxxxxxxxxxxx>
• Re: [PATCH v2 5/5] iio: gyro: bmg160: use regmap to retrieve struct device
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 4/5] iio: health: afe4404: use regmap to retrieve struct device
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 3/5] iio: health: afe4403: use regmap to retrieve struct device
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 2/5] iio: accel: mxc4005: use regmap to retrieve struct device
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 1/5] iio: accel: bmc150: use regmap to retrieve struct device
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] i2c: exynos5: Fix possible ABBA deadlock by keeping I2C clock prepared
  • From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
• Re: [PATCH] i2c: exynos5: Fix possible ABBA deadlock by keeping I2C clock prepared
  • From: Anand Moon <linux.amoon@xxxxxxxxx>
• Re: [GIT PULL] clk/samsung updates for v4.7
  • From: Stephen Boyd <sboyd@xxxxxxxxxxxxxx>
• [PATCH] i2c: exynos5: Fix possible ABBA deadlock by keeping I2C clock prepared
  • From: Javier Martinez Canillas <javier@xxxxxxxxxxxxxxx>
• [GIT PULL] clk/samsung updates for v4.7
  • From: Sylwester Nawrocki <s.nawrocki@xxxxxxxxxxx>
• Re: [PATCH v2 6/8] clk: samsung: exynos542x: Add the clock id for ACLK
  • From: Sylwester Nawrocki <s.nawrocki@xxxxxxxxxxx>
• Re: [PATCH] clk: samsung: exynos7: Don't gate CMU_{CCORE, FSYS0} blocks clock
  • From: Sylwester Nawrocki <s.nawrocki@xxxxxxxxxxx>
• Re: [PATCH] clk: samsung: exynos7: Don't gate CMU_{CCORE, FSYS0} blocks clock
  • From: Alim Akhtar <alim.akhtar@xxxxxxxxxxx>
• [PATCH v8] drivers: amba: properly handle devices with power domains
  • From: Marek Szyprowski <m.szyprowski@xxxxxxxxxxx>
• Re: [PATCH v2 8/8] ARM: dts: Add support of Bus frequency using VDD_INT for exynos5422-odroidxu3
  • From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
• Re: [PATCH v2 6/8] clk: samsung: exynos542x: Add the clock id for ACLK
  • From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
• Re: [PATCH v2 4/8] ARM: dts: Add NoC Probe dt node for Exynos542x SoC
  • From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
• Re: [PATCH v2 1/8] PM / devfreq: event: Add new Exynos NoC probe driver
  • From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
• Re: [PATCH v5 16/24] ARM: explicitly apply PWM config extracted from pwm_args
  • From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
• Re: [PATCH v5 07/24] regulator: pwm: use pwm_get_args() where appropriate
  • From: Mark Brown <broonie@xxxxxxxxxx>
• [PATCH v2 6/8] clk: samsung: exynos542x: Add the clock id for ACLK
  • From: Chanwoo Choi <cw00.choi@xxxxxxxxxxx>
• [PATCH v2 2/8] PM / devfreq: event: Find the instance of devfreq-event device by using phandle
  • From: Chanwoo Choi <cw00.choi@xxxxxxxxxxx>
• [PATCH v2 1/8] PM / devfreq: event: Add new Exynos NoC probe driver
  • From: Chanwoo Choi <cw00.choi@xxxxxxxxxxx>
• [PATCH v2 4/8] ARM: dts: Add NoC Probe dt node for Exynos542x SoC
  • From: Chanwoo Choi <cw00.choi@xxxxxxxxxxx>
• [PATCH v2 3/8] PM / devfreq: exynos: Add the detailed correlation for Exynos5422 bus
  • From: Chanwoo Choi <cw00.choi@xxxxxxxxxxx>
• [PATCH v2 0/8] PM / devfreq: Add NoCP devfreq-event and support busfreq on exyno5422-odroidxu3
  • From: Chanwoo Choi <cw00.choi@xxxxxxxxxxx>
• [PATCH v2 8/8] ARM: dts: Add support of Bus frequency using VDD_INT for exynos5422-odroidxu3
  • From: Chanwoo Choi <cw00.choi@xxxxxxxxxxx>
• [PATCH v2 7/8] ARM: dts: Add bus nodes using VDD_INT for Exynos542x SoC
  • From: Chanwoo Choi <cw00.choi@xxxxxxxxxxx>
• [PATCH v2 5/8] dt-bindings: clock: Add the clock id for ACLK clock of Exynos542x SoC
  • From: Chanwoo Choi <cw00.choi@xxxxxxxxxxx>
• Re: [PATCH 2/7] PM / devfreq: exynos: Add the detailed correlation for Exynos5422 bus
  • From: Chanwoo Choi <cw00.choi@xxxxxxxxxxx>
• Re: [PATCH 1/7] PM / devfreq: event: Add new Exynos NoC probe driver
  • From: Chanwoo Choi <cw00.choi@xxxxxxxxxxx>
• Re: [PATCH v7 1/2] drivers: base: add support for registering notifier about deferred probe
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v7 1/2] drivers: base: add support for registering notifier about deferred probe
  • From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
• Re: [PATCH v7 1/2] drivers: base: add support for registering notifier about deferred probe
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• [PATCH v5 02/24] pwm: use pwm_get/set_xxx() helpers where appropriate
  • From: Boris Brezillon <boris.brezillon@xxxxxxxxxxxxxxxxxx>
• [PATCH v5 03/24] clk: pwm: use pwm_get_args() where appropriate
  • From: Boris Brezillon <boris.brezillon@xxxxxxxxxxxxxxxxxx>
• [PATCH v5 00/24] pwm: add support for atomic update
  • From: Boris Brezillon <boris.brezillon@xxxxxxxxxxxxxxxxxx>
• [PATCH v5 05/24] input: misc: max77693: use pwm_get_args() where appropriate
  • From: Boris Brezillon <boris.brezillon@xxxxxxxxxxxxxxxxxx>
• [PATCH v5 04/24] hwmon: pwm-fan: use pwm_get_args() where appropriate
  • From: Boris Brezillon <boris.brezillon@xxxxxxxxxxxxxxxxxx>
• [PATCH v5 07/24] regulator: pwm: use pwm_get_args() where appropriate
  • From: Boris Brezillon <boris.brezillon@xxxxxxxxxxxxxxxxxx>
• [PATCH v5 06/24] leds: pwm: use pwm_get_args() where appropriate
  • From: Boris Brezillon <boris.brezillon@xxxxxxxxxxxxxxxxxx>
• [PATCH v5 08/24] fbdev: ssd1307fb: use pwm_get_args() where appropriate
  • From: Boris Brezillon <boris.brezillon@xxxxxxxxxxxxxxxxxx>
• [PATCH v5 11/24] backlight: lp855x: explicitly apply PWM config extracted from pwm_args
  • From: Boris Brezillon <boris.brezillon@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH v5 02/24] pwm: use pwm_get/set_xxx() helpers where appropriate
  • From: Joachim Eastwood <manabian@xxxxxxxxx>
• [PATCH v5 12/24] backlight: lm3630a: explicitly apply PWM config extracted from pwm_args
  • From: Boris Brezillon <boris.brezillon@xxxxxxxxxxxxxxxxxx>
• [PATCH v5 09/24] backlight: pwm_bl: use pwm_get_args() where appropriate
  • From: Boris Brezillon <boris.brezillon@xxxxxxxxxxxxxxxxxx>
• [PATCH v5 15/24] drm: i915: explicitly apply PWM config extracted from pwm_args
  • From: Boris Brezillon <boris.brezillon@xxxxxxxxxxxxxxxxxx>
• [PATCH v5 16/24] ARM: explicitly apply PWM config extracted from pwm_args
  • From: Boris Brezillon <boris.brezillon@xxxxxxxxxxxxxxxxxx>
• [PATCH v5 17/24] pwm: keep PWM state in sync with hardware state
  • From: Boris Brezillon <boris.brezillon@xxxxxxxxxxxxxxxxxx>
• [PATCH v5 13/24] input: misc: max8997: explicitly apply PWM config extracted from pwm_args
  • From: Boris Brezillon <boris.brezillon@xxxxxxxxxxxxxxxxxx>
• [PATCH v5 20/24] pwm: add the PWM initial state retrieval infra
  • From: Boris Brezillon <boris.brezillon@xxxxxxxxxxxxxxxxxx>
• [PATCH v5 22/24] pwm: update documentation
  • From: Boris Brezillon <boris.brezillon@xxxxxxxxxxxxxxxxxx>
• [PATCH v5 21/24] pwm: add the core infrastructure to allow atomic update
  • From: Boris Brezillon <boris.brezillon@xxxxxxxxxxxxxxxxxx>
• [PATCH v5 18/24] pwm: introduce the pwm_state concept
  • From: Boris Brezillon <boris.brezillon@xxxxxxxxxxxxxxxxxx>
• [PATCH v5 23/24] pwm: switch to the atomic API
  • From: Boris Brezillon <boris.brezillon@xxxxxxxxxxxxxxxxxx>
• [PATCH v5 24/24] pwm: add information about polarity, duty cycle and period to debugfs
  • From: Boris Brezillon <boris.brezillon@xxxxxxxxxxxxxxxxxx>
• [PATCH v5 19/24] pwm: move the enabled/disabled info into pwm_state
  • From: Boris Brezillon <boris.brezillon@xxxxxxxxxxxxxxxxxx>
• [PATCH v5 10/24] backlight: lp8788: explicitly apply PWM config extracted from pwm_args
  • From: Boris Brezillon <boris.brezillon@xxxxxxxxxxxxxxxxxx>
• [PATCH v5 14/24] input: misc: pwm-beeper: explicitly apply PWM config extracted from pwm_args
  • From: Boris Brezillon <boris.brezillon@xxxxxxxxxxxxxxxxxx>
• [PATCH v5 01/24] pwm: introduce the pwm_args concept
  • From: Boris Brezillon <boris.brezillon@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH 2/2] i2c: s3c2410: Use SET_NOIRQ_SYSTEM_SLEEP_PM_OPS instead of open-coded
  • From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
• Re: [PATCH 1/2] i2c: exynos5: Use SET_NOIRQ_SYSTEM_SLEEP_PM_OPS instead of open-coded
  • From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
• Re: [PATCH v5 01/46] pwm: rcar: make use of pwm_is_enabled()
  • From: Boris Brezillon <boris.brezillon@xxxxxxxxxxxxxxxxxx>
• Re: [next] Failing Odroid XU3 boot due to missing MMC device
  • From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
• Re: [PATCH] [media] exynos-gsc: remove an always false condition
  • From: Sylwester Nawrocki <s.nawrocki@xxxxxxxxxxx>
• Re: [next] Failing Odroid XU3 boot due to missing MMC device
  • From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
• Re: [next] Failing Odroid XU3 boot due to missing MMC device
  • From: Markus Reichl <m.reichl@xxxxxxxxxxxxx>
• Re: [next] Failing Odroid XU3 boot due to missing MMC device
  • From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
• Re: [PATCH v7 1/2] drivers: base: add support for registering notifier about deferred probe
  • From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
• Re: [next] Failing Odroid XU3 boot due to missing MMC device
  • From: Markus Reichl <m.reichl@xxxxxxxxxxxxx>
• Re: [next] Failing Odroid XU3 boot due to missing MMC device
  • From: Jaehoon Chung <jh80.chung@xxxxxxxxxxx>
• [next] Failing Odroid XU3 boot due to missing MMC device
  • From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
• Re: [PATCH] clk: samsung: exynos7: Don't gate CMU_{CCORE, FSYS0} blocks clock
  • From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
• Re: [PATCH v7 1/2] drivers: base: add support for registering notifier about deferred probe
  • From: Marek Szyprowski <m.szyprowski@xxxxxxxxxxx>
• Re: [PATCH 5/7] clk: samsung: exynos542x: Add the clock id for ACLK
  • From: Chanwoo Choi <cw00.choi@xxxxxxxxxxx>
• Re: [PATCH 3/7] ARM: dts: Add NoC Probe dt node for Exynos542x SoC
  • From: Chanwoo Choi <cw00.choi@xxxxxxxxxxx>
• Re: [PATCH v8 02/20] PM / devfreq: exynos: Add documentation for generic exynos bus frequency driver
  • From: Chanwoo Choi <cw00.choi@xxxxxxxxxxx>
• [PATCH] clk: samsung: exynos7: Don't gate CMU_{CCORE, FSYS0} blocks clock
  • From: Alim Akhtar <alim.akhtar@xxxxxxxxxxx>
• [PATCH 2/2] i2c: s3c2410: Use SET_NOIRQ_SYSTEM_SLEEP_PM_OPS instead of open-coded
  • From: Axel Lin <axel.lin@xxxxxxxxxx>
• [PATCH 1/2] i2c: exynos5: Use SET_NOIRQ_SYSTEM_SLEEP_PM_OPS instead of open-coded
  • From: Axel Lin <axel.lin@xxxxxxxxxx>
• Re: [PATCH 6/7] ARM: dts: Add bus nodes using VDD_INT for Exynos542x SoC
  • From: Chanwoo Choi <cw00.choi@xxxxxxxxxxx>
• Re: [PATCH 7/7] ARM: dts: Add support of Bus frequency using VDD_INT for exynos5422-odroidxu3
  • From: Chanwoo Choi <cw00.choi@xxxxxxxxxxx>
• [PATCH] [media] exynos-gsc: remove an always false condition
  • From: Mauro Carvalho Chehab <mchehab@xxxxxxxxxxxxxxx>
• Re: [PATCH v5 00/52] mtd: rework ECC layout definition
  • From: Boris Brezillon <boris.brezillon@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH v5 04/50] mtd: nand: atmel: use mtd_ooblayout_xxx() helpers where appropriate
  • From: Nicolas Ferre <nicolas.ferre@xxxxxxxxx>
• Re: [PATCH v5 22/50] mtd: nand: atmel: switch to mtd_ooblayout_ops
  • From: Nicolas Ferre <nicolas.ferre@xxxxxxxxx>
• Re: [PATCH v5 22/50] mtd: nand: atmel: switch to mtd_ooblayout_ops
  • From: Boris Brezillon <boris.brezillon@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH v5 04/50] mtd: nand: atmel: use mtd_ooblayout_xxx() helpers where appropriate
  • From: Boris Brezillon <boris.brezillon@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH v7 1/2] drivers: base: add support for registering notifier about deferred probe
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• [PATCH 2/9] mtd: nand: s3c2410: set ECC algorithm explicitly
  • From: Rafał Miłecki <zajec5@xxxxxxxxx>
• Re: [PATCH] clk: samsung: exynos7: Enable clocks for CMU_CCORE and CMU_FSYS0 blocks
  • From: Alim Akhtar <alim.akhtar@xxxxxxxxxxx>
• Re: [PATCH] clk: samsung: exynos7: Enable clocks for CMU_CCORE and CMU_FSYS0 blocks
  • From: Tomasz Figa <tomasz.figa@xxxxxxxxx>
• Re: [PATCH] clk: samsung: exynos7: Enable clocks for CMU_CCORE and CMU_FSYS0 blocks
  • From: Sylwester Nawrocki <s.nawrocki@xxxxxxxxxxx>
• [GIT PULL 4/5] ARM: defconfig for v4.7
  • From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
• [GIT PULL 5/5] arm64: defconfig for v4.7
  • From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
• [GIT PULL 2/5] ARM: dts: exynos: DT for v4.7
  • From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
• [GIT PULL 1/5] ARM: dts: exynos: Artik5 topic branch for v4.7
  • From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
• [GIT PULL 3/5] arm64: dts: exynos: DT for v4.7
  • From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
• [GIT PULL 0/5] ARM: EXYNOS: Stuff for v4.7
  • From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
• [PATCH v7 0/2] AMBA: add complete support for power domains
  • From: Marek Szyprowski <m.szyprowski@xxxxxxxxxxx>
• [PATCH v7 1/2] drivers: base: add support for registering notifier about deferred probe
  • From: Marek Szyprowski <m.szyprowski@xxxxxxxxxxx>
• [PATCH v7 2/2] drivers: amba: properly handle devices with power domains
  • From: Marek Szyprowski <m.szyprowski@xxxxxxxxxxx>
• Re: [PATCH v2] arm64: dts: Add nodes for pdma0 and pdam1 for exynos7
  • From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
• Re: [PATCH v5 03/46] backlight: lm3630a_bl: stop messing with the pwm->period field
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [PATCH v5 03/46] backlight: lm3630a_bl: stop messing with the pwm->period field
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [PATCH] clk: samsung: exynos7: Enable clocks for CMU_CCORE and CMU_FSYS0 blocks
  • From: Tomasz Figa <tomasz.figa@xxxxxxxxx>
• Re: [PATCH 5/7] clk: samsung: exynos542x: Add the clock id for ACLK
  • From: Tomasz Figa <tomasz.figa@xxxxxxxxx>
• [PATCH v2] arm64: dts: Add nodes for pdma0 and pdam1 for exynos7
  • From: Alim Akhtar <alim.akhtar@xxxxxxxxxxx>
• Re: [PATCH] arm64: dts: Add nodes for pdma0 and pdam1 for exynos7
  • From: Alim Akhtar <alim.akhtar@xxxxxxxxxxx>
• Re: exynos5800 based peach-pi boot is broken with v4.6-rc-1
  • From: Alim Akhtar <alim.akhtar@xxxxxxxxxxx>
• Re: [PATCH v5 34/50] mtd: nand: gpmi: switch to mtd_ooblayout_ops
  • From: Boris Brezillon <boris.brezillon@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH v6] drivers: amba: properly handle devices with power domains
  • From: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
• Re: [RESPIN v2 6/6] ARM: dts: change SROM node compatible from generic to model specific
  • From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
• Re: [PATCH v5 03/46] backlight: lm3630a_bl: stop messing with the pwm->period field
  • From: Thierry Reding <thierry.reding@xxxxxxxxx>
• Re: [PATCH v5 02/46] backlight: pwm_bl: remove useless call to pwm_set_period()
  • From: Thierry Reding <thierry.reding@xxxxxxxxx>
• Re: [PATCH 2/2] ARM: multi_v7_defconfig: Enable CPUFreq governors as modules
  • From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
• Re: [PATCH v5 02/46] backlight: pwm_bl: remove useless call to pwm_set_period()
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [PATCH v5 03/46] backlight: lm3630a_bl: stop messing with the pwm->period field
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [PATCH 1/2] ARM: exynos_defconfig: Enable CPUFreq governors as modules
  • From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
• Re: [PATCH v5 15/46] pwm: introduce the pwm_state concept
  • From: Boris Brezillon <boris.brezillon@xxxxxxxxxxxxxxxxxx>
• [PATCH v6] drivers: amba: properly handle devices with power domains
  • From: Marek Szyprowski <m.szyprowski@xxxxxxxxxxx>
• Re: [PATCH v5 RESEND 4/5] ARM: amba: Move reading of periphid to amba_match()
  • From: Marek Szyprowski <m.szyprowski@xxxxxxxxxxx>
• Re: [PATCH] arm64: dts: Add nodes for pdma0 and pdam1 for exynos7
  • From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
• Re: [PATCH v5 15/46] pwm: introduce the pwm_state concept
  • From: Thierry Reding <thierry.reding@xxxxxxxxx>
• Re: exynos5800 based peach-pi boot is broken with v4.6-rc-1
  • From: Javier Martinez Canillas <javier@xxxxxxxxxxxxxxx>
• Re: exynos5800 based peach-pi boot is broken with v4.6-rc-1
  • From: Doug Anderson <dianders@xxxxxxxxxxxx>
• Re: [PATCH v5 15/46] pwm: introduce the pwm_state concept
  • From: Boris Brezillon <boris.brezillon@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH v5 05/46] pwm: introduce the pwm_args concept
  • From: Thierry Reding <thierry.reding@xxxxxxxxx>
• Re: [PATCH v5 15/46] pwm: introduce the pwm_state concept
  • From: Thierry Reding <thierry.reding@xxxxxxxxx>
• Re: [PATCH v5 05/46] pwm: introduce the pwm_args concept
  • From: Boris Brezillon <boris.brezillon@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH v5 05/46] pwm: introduce the pwm_args concept
  • From: Boris Brezillon <boris.brezillon@xxxxxxxxxxxxxxxxxx>
• [PATCH] arm64: dts: Add nodes for pdma0 and pdam1 for exynos7
  • From: Alim Akhtar <alim.akhtar@xxxxxxxxxxx>
• Re: [PATCH v5 15/46] pwm: introduce the pwm_state concept
  • From: Boris Brezillon <boris.brezillon@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH v5 15/46] pwm: introduce the pwm_state concept
  • From: Thierry Reding <thierry.reding@xxxxxxxxx>
• Re: [PATCH v5 05/46] pwm: introduce the pwm_args concept
  • From: Thierry Reding <thierry.reding@xxxxxxxxx>
• Re: [PATCH v5 15/46] pwm: introduce the pwm_state concept
  • From: Boris Brezillon <boris.brezillon@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH v5 05/46] pwm: introduce the pwm_args concept
  • From: Boris Brezillon <boris.brezillon@xxxxxxxxxxxxxxxxxx>
• Re: exynos5800 based peach-pi boot is broken with v4.6-rc-1
  • From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
• exynos5800 based peach-pi boot is broken with v4.6-rc-1
  • From: Alim Akhtar <alim.akhtar@xxxxxxxxxxx>
• Re: [PATCH v5 16/46] pwm: move the enabled/disabled info into pwm_state
  • From: Thierry Reding <thierry.reding@xxxxxxxxx>
• Re: [PATCH v5 15/46] pwm: introduce the pwm_state concept
  • From: Thierry Reding <thierry.reding@xxxxxxxxx>
• Re: [PATCH v5 04/46] pwm: get rid of pwm->lock
  • From: Thierry Reding <thierry.reding@xxxxxxxxx>
• Re: [PATCH v5 RESEND 4/5] ARM: amba: Move reading of periphid to amba_match()
  • From: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
• Re: [PATCH v5 05/46] pwm: introduce the pwm_args concept
  • From: Thierry Reding <thierry.reding@xxxxxxxxx>
• Re: [PATCH] clk: samsung: exynos7: Enable clocks for CMU_CCORE and CMU_FSYS0 blocks
  • From: Sylwester Nawrocki <s.nawrocki@xxxxxxxxxxx>
• Re: [PATCH] mtd: nand: s3c2410: fix bug in s3c2410_nand_correct_data()
  • From: Boris Brezillon <boris.brezillon@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH v5 04/46] pwm: get rid of pwm->lock
  • From: Boris Brezillon <boris.brezillon@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH 4/7] dt-bindings: clock: Add the clock id for ACLK clock of Exynos542x SoC
  • From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
• Re: [PATCH 5/7] clk: samsung: exynos542x: Add the clock id for ACLK
  • From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
• Re: [PATCH v5 04/46] pwm: get rid of pwm->lock
  • From: Thierry Reding <thierry.reding@xxxxxxxxx>
• Re: [PATCH v5 03/46] backlight: lm3630a_bl: stop messing with the pwm->period field
  • From: Thierry Reding <thierry.reding@xxxxxxxxx>
• [PATCH] clk: samsung: exynos7: Enable clocks for CMU_CCORE and CMU_FSYS0 blocks
  • From: Alim Akhtar <alim.akhtar@xxxxxxxxxxx>
• Re: [PATCH v5 02/46] backlight: pwm_bl: remove useless call to pwm_set_period()
  • From: Thierry Reding <thierry.reding@xxxxxxxxx>
• Re: [PATCH v5 01/46] pwm: rcar: make use of pwm_is_enabled()
  • From: Thierry Reding <thierry.reding@xxxxxxxxx>
• Re: [PATCH 7/7] ARM: dts: Add support of Bus frequency using VDD_INT for exynos5422-odroidxu3
  • From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
• Re: [PATCH 6/7] ARM: dts: Add bus nodes using VDD_INT for Exynos542x SoC
  • From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
• Re: [PATCH v5 30/46] regulator: pwm: retrieve correct voltage
  • From: Boris Brezillon <boris.brezillon@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH v5 30/46] regulator: pwm: retrieve correct voltage
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH v5 30/46] regulator: pwm: retrieve correct voltage
  • From: Boris Brezillon <boris.brezillon@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH v9 10/20] MAINTAINERS: Add samsung bus frequency driver entry
  • From: Chanwoo Choi <cw00.choi@xxxxxxxxxxx>
• Re: [PATCH v9 08/20] PM / devfreq: exynos: Add the detailed correlation between sub-blocks and power line
  • From: Chanwoo Choi <cw00.choi@xxxxxxxxxxx>
• Re: [PATCH v9 07/20] PM / devfreq: exynos: Update documentation for bus devices using passive governor
  • From: Chanwoo Choi <cw00.choi@xxxxxxxxxxx>
• Re: [PATCH v9 07/20] PM / devfreq: exynos: Update documentation for bus devices using passive governor
  • From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
• Re: [PATCH v9 10/20] MAINTAINERS: Add samsung bus frequency driver entry
  • From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
• Re: [PATCH 3/7] ARM: dts: Add NoC Probe dt node for Exynos542x SoC
  • From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
• Re: [PATCH v9 08/20] PM / devfreq: exynos: Add the detailed correlation between sub-blocks and power line
  • From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
• Re: [PATCH v9 05/20] PM / devfreq: Add new passive governor
  • From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
• Re: [PATCH v9 06/20] PM / devfreq: exynos: Add support of bus frequency of sub-blocks using passive governor
  • From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
• Re: [PATCH 1/7] PM / devfreq: event: Add new Exynos NoC probe driver
  • From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
• Re: [PATCH 5/7] drm/exynos/decon5433: fix DECON standalone update
  • From: Inki Dae <inki.dae@xxxxxxxxxxx>
• Re: [PATCH 5/7] drm/exynos/decon5433: fix DECON standalone update
  • From: Andrzej Hajda <a.hajda@xxxxxxxxxxx>
• [PATCH] mtd: nand: s3c2410: fix bug in s3c2410_nand_correct_data()
  • From: zengzhaoxiu@xxxxxxx
• Re: [PATCH v9 03/20] PM / devfreq: Add devfreq_get_devfreq_by_phandle()
  • From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
• Re: [PATCH v9 01/20] PM / devfreq: exynos: Add generic exynos bus frequency driver
  • From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
• [PATCH v2] drm/exynos: decon: clean up interface type
  • From: Inki Dae <inki.dae@xxxxxxxxxxx>
• Re: [PATCH 3/3] drm/exynos: decon: clean up interface type
  • From: Inki Dae <inki.dae@xxxxxxxxxxx>
• Re: [PATCH 3/3] drm/exynos: decon: clean up interface type
  • From: Andrzej Hajda <a.hajda@xxxxxxxxxxx>
• Re: [PATCH v5 30/46] regulator: pwm: retrieve correct voltage
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH 5/7] drm/exynos/decon5433: fix DECON standalone update
  • From: Inki Dae <inki.dae@xxxxxxxxxxx>
• [PATCH] drm/exynos: clean up register definions for fimd and decon
  • From: Inki Dae <inki.dae@xxxxxxxxxxx>
• Re: [PATCH 3/3] drm/exynos: decon: clean up interface type
  • From: Inki Dae <inki.dae@xxxxxxxxxxx>
• Re: [PATCH v5 00/46] pwm: add support for atomic update
  • From: Boris Brezillon <boris.brezillon@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH v8 02/20] PM / devfreq: exynos: Add documentation for generic exynos bus frequency driver
  • From: Chanwoo Choi <cwchoi00@xxxxxxxxx>
• Re: [PATCH v9 00/20] PM / devferq: Add generic exynos bus frequency driver and new passive governor
  • From: Chanwoo Choi <cwchoi00@xxxxxxxxx>
• Re: [PATCH v9 00/20] PM / devferq: Add generic exynos bus frequency driver and new passive governor
  • From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
• Re: [PATCH 2/7] PM / devfreq: exynos: Add the detailed correlation for Exynos5422 bus
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v8 02/20] PM / devfreq: exynos: Add documentation for generic exynos bus frequency driver
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: Odroid XU4 deadlock
  • From: Javier Martinez Canillas <javier@xxxxxxxxxxxxxxx>
• Re: [RESEND PATCH] mfd: max77686: Use module_i2c_driver() instead of subsys initcall
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [PATCH 1/2] mfd: max77693: Allow building as a module
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [PATCH] mtd: nand: s3c2410: fix bug in s3c2410_nand_correct_data()
  • From: Boris Brezillon <boris.brezillon@xxxxxxxxxxxxxxxxxx>
• [RESPIN v2 2/6] memory: Add support for Exynos SROM driver
  • From: Pankaj Dubey <pankaj.dubey@xxxxxxxxxxx>
• [RESPIN v2 3/6] MAINTAINERS: Add maintainers entry for drivers/memory/samsung
  • From: Pankaj Dubey <pankaj.dubey@xxxxxxxxxxx>
• [RESPIN v2 4/6] ARM: EXYNOS: Remove SROM related register settings from mach-exynos
  • From: Pankaj Dubey <pankaj.dubey@xxxxxxxxxxx>
• [RESPIN v2 6/6] ARM: dts: change SROM node compatible from generic to model specific
  • From: Pankaj Dubey <pankaj.dubey@xxxxxxxxxxx>
• [RESPIN v2 5/6] memory: samsung: exynos-srom: Add support for bank configuration
  • From: Pankaj Dubey <pankaj.dubey@xxxxxxxxxxx>
• [RESPIN v2 0/6] Add support for Exynos SROM Controller driver
  • From: Pankaj Dubey <pankaj.dubey@xxxxxxxxxxx>
• [RESPIN v2 1/6] dt-bindings: EXYNOS: Add exynos-srom device tree binding
  • From: Pankaj Dubey <pankaj.dubey@xxxxxxxxxxx>
• Re: Odroid XU4 deadlock
  • From: Anand Moon <linux.amoon@xxxxxxxxx>
• Re: [PATCH 0/7] PM / devfreq: Add NoCP devfreq-event and support busfreq on exyno5422-odroidxu3
  • From: Chanwoo Choi <cw00.choi@xxxxxxxxxxx>
• [PATCH v9 02/20] PM / devfreq: exynos: Add documentation for generic exynos bus frequency driver
  • From: Chanwoo Choi <cw00.choi@xxxxxxxxxxx>
• [PATCH v9 10/20] MAINTAINERS: Add samsung bus frequency driver entry
  • From: Chanwoo Choi <cw00.choi@xxxxxxxxxxx>
• [PATCH v9 01/20] PM / devfreq: exynos: Add generic exynos bus frequency driver
  • From: Chanwoo Choi <cw00.choi@xxxxxxxxxxx>
• Re: [PATCH 0/7] PM / devfreq: Add NoCP devfreq-event and support busfreq on exyno5422-odroidxu3
  • From: Chanwoo Choi <cw00.choi@xxxxxxxxxxx>
• [PATCH v9 16/20] ARM: dts: Add bus nodes using VDD_MIF for Exynos4210
  • From: Chanwoo Choi <cw00.choi@xxxxxxxxxxx>
• [PATCH v9 03/20] PM / devfreq: Add devfreq_get_devfreq_by_phandle()
  • From: Chanwoo Choi <cw00.choi@xxxxxxxxxxx>
• [PATCH v9 11/20] ARM: dts: Add DMC bus node for Exynos3250
  • From: Chanwoo Choi <cw00.choi@xxxxxxxxxxx>
• [PATCH v9 00/20] PM / devferq: Add generic exynos bus frequency driver and new passive governor
  • From: Chanwoo Choi <cw00.choi@xxxxxxxxxxx>
• [PATCH v9 04/20] PM / devfreq: Add new DEVFREQ_TRANSITION_NOTIFIER notifier
  • From: Chanwoo Choi <cw00.choi@xxxxxxxxxxx>
• [PATCH v9 12/20] ARM: dts: Add DMC bus frequency for exynos3250-rinato/monk
  • From: Chanwoo Choi <cw00.choi@xxxxxxxxxxx>
• [PATCH v9 08/20] PM / devfreq: exynos: Add the detailed correlation between sub-blocks and power line
  • From: Chanwoo Choi <cw00.choi@xxxxxxxxxxx>
• Re: [PATCH 0/7] PM / devfreq: Add NoCP devfreq-event and support busfreq on exyno5422-odroidxu3
  • From: Anand Moon <linux.amoon@xxxxxxxxx>
• [PATCH v9 18/20] ARM: dts: Add support of bus frequency using VDD_INT for exynos3250-rinato
  • From: Chanwoo Choi <cw00.choi@xxxxxxxxxxx>
• Re: [PATCH v9 00/20] PM / devferq: Add generic exynos bus frequency driver and new passive governor
  • From: Chanwoo Choi <cw00.choi@xxxxxxxxxxx>
• [PATCH v9 13/20] ARM: dts: Add bus nodes using VDD_INT for Exynos3250
  • From: Chanwoo Choi <cw00.choi@xxxxxxxxxxx>
• [PATCH v9 07/20] PM / devfreq: exynos: Update documentation for bus devices using passive governor
  • From: Chanwoo Choi <cw00.choi@xxxxxxxxxxx>
• [PATCH v9 06/20] PM / devfreq: exynos: Add support of bus frequency of sub-blocks using passive governor
  • From: Chanwoo Choi <cw00.choi@xxxxxxxxxxx>
• [PATCH v9 09/20] PM / devfreq: exynos: Remove unused exynos4/5 busfreq driver
  • From: Chanwoo Choi <cw00.choi@xxxxxxxxxxx>
• [PATCH v9 14/20] ARM: dts: Add bus nodes using VDD_MIF for Exynos4x12
  • From: Chanwoo Choi <cw00.choi@xxxxxxxxxxx>
• [PATCH v9 17/20] ARM: dts: Add exynos4412-ppmu-common dtsi to delete duplicate PPMU nodes
  • From: Chanwoo Choi <cw00.choi@xxxxxxxxxxx>
• [PATCH v9 15/20] ARM: dts: Add bus nodes using VDD_INT for Exynos4x12
  • From: Chanwoo Choi <cw00.choi@xxxxxxxxxxx>
• [PATCH v9 20/20] ARM: dts: Add support of bus frequency for exynos4412-trats/odroidu3
  • From: Chanwoo Choi <cw00.choi@xxxxxxxxxxx>
• [PATCH v9 19/20] ARM: dts: Expand the voltage range of buck1/3 regulator for exynos4412-odroidu3
  • From: Chanwoo Choi <cw00.choi@xxxxxxxxxxx>
• [PATCH v9 05/20] PM / devfreq: Add new passive governor
  • From: Chanwoo Choi <cw00.choi@xxxxxxxxxxx>
• Re: [PATCH 0/7] PM / devfreq: Add NoCP devfreq-event and support busfreq on exyno5422-odroidxu3
  • From: Chanwoo Choi <cw00.choi@xxxxxxxxxxx>
• [PATCH v2 5/5] iio: gyro: bmg160: use regmap to retrieve struct device
  • From: Alison Schofield <amsfield22@xxxxxxxxx>
• [PATCH v2 4/5] iio: health: afe4404: use regmap to retrieve struct device
  • From: Alison Schofield <amsfield22@xxxxxxxxx>
• [PATCH v2 2/5] iio: accel: mxc4005: use regmap to retrieve struct device
  • From: Alison Schofield <amsfield22@xxxxxxxxx>
• [PATCH v2 3/5] iio: health: afe4403: use regmap to retrieve struct device
  • From: Alison Schofield <amsfield22@xxxxxxxxx>
• [PATCH v2 1/5] iio: accel: bmc150: use regmap to retrieve struct device
  • From: Alison Schofield <amsfield22@xxxxxxxxx>
• [PATCH v2 0/5] iio: use regmap to retrieve struct device
  • From: Alison Schofield <amsfield22@xxxxxxxxx>
• Re: [PATCH 3/9] iio: adc: qcom-spmi-vadc: use regmap to retrieve struct device
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 2/9] iio: adc: qcom-spmi-iadc: use regmap to retrieve struct device
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 5/9] iio: accel: mma7455: use regmap to retrieve struct device
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 1/9] iio: adc: exynos_adc: use regmap to retrieve struct device
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 1/2] mfd: max77693: Allow building as a module
  • From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
• Re: [PATCH 2/2] ARM: multi_v7_defconfig: Enable CPUFreq governors as modules
  • From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
• Re: [PATCH 1/2] ARM: exynos_defconfig: Enable CPUFreq governors as modules
  • From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
• Re: Odroid XU4 deadlock
  • From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
• [PATCH 2/2] ARM: multi_v7_defconfig: Enable CPUFreq governors as modules
  • From: Javier Martinez Canillas <javier@xxxxxxxxxxxxxxx>
• [PATCH 1/2] ARM: exynos_defconfig: Enable CPUFreq governors as modules
  • From: Javier Martinez Canillas <javier@xxxxxxxxxxxxxxx>
• Re: [PATCH 0/7] PM / devfreq: Add NoCP devfreq-event and support busfreq on exyno5422-odroidxu3
  • From: Chanwoo Choi <cwchoi00@xxxxxxxxx>
• Re: [PATCH 0/7] PM / devfreq: Add NoCP devfreq-event and support busfreq on exyno5422-odroidxu3
  • From: Chanwoo Choi <cwchoi00@xxxxxxxxx>
• Re: [PATCH 0/7] PM / devfreq: Add NoCP devfreq-event and support busfreq on exyno5422-odroidxu3
  • From: Anand Moon <linux.amoon@xxxxxxxxx>
• [PATCH] ASoC: samsung: Remove unused Odroid x2/u3 machine driver
  • From: Sylwester Nawrocki <s.nawrocki@xxxxxxxxxxx>
• [PATCH 3/3] ASoC: samsung: Use of_device_get_match_data() helper
  • From: Sylwester Nawrocki <s.nawrocki@xxxxxxxxxxx>
• [PATCH 2/3] ASoC: samsung: Remove definition of an unused data structure
  • From: Sylwester Nawrocki <s.nawrocki@xxxxxxxxxxx>
• [PATCH 1/3] ASoC: samsung: Remove unused "samsung-i2sv4" platform_device_id entry
  • From: Sylwester Nawrocki <s.nawrocki@xxxxxxxxxxx>
• Re: Odroid XU4 deadlock
  • From: Anand Moon <linux.amoon@xxxxxxxxx>
• Re: Odroid XU4 deadlock
  • From: Javier Martinez Canillas <javier@xxxxxxxxxxxxxxx>
• Odroid XU4 deadlock
  • From: Anand Moon <linux.amoon@xxxxxxxxx>
• Re: [PATCH 0/7] PM / devfreq: Add NoCP devfreq-event and support busfreq on exyno5422-odroidxu3
  • From: Markus Reichl <m.reichl@xxxxxxxxxxxxx>
• Re: [PATCH 1/2] mfd: max77693: Allow building as a module
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [PATCH] mtd: nand: s3c2410: fix bug in s3c2410_nand_correct_data()
  • From: Zeng Zhaoxiu <zhaoxiu.zeng@xxxxxxxxx>