The L3 bus GPIOs are specified in the board file rather than through
the sound card's device platform_data. This allows to ensure the codec
driver doesn't get probed with uninitialized platform_data field of
its corresponding platform device.
Signed-off-by: Sylwester Nawrocki <s.nawrocki@xxxxxxxxxxx>
---
arch/arm/mach-s3c24xx/mach-mini2440.c | 19 +++++++++++++++++++
1 file changed, 19 insertions(+)
diff --git a/arch/arm/mach-s3c24xx/mach-mini2440.c b/arch/arm/mach-s3c24xx/mach-mini2440.c
index a852168..13999c1 100644
--- a/arch/arm/mach-s3c24xx/mach-mini2440.c
+++ b/arch/arm/mach-s3c24xx/mach-mini2440.c
@@ -497,9 +497,28 @@ static struct i2c_board_info mini2440_i2c_devs[] __initdata = {
},
};
+static struct uda134x_platform_data s3c24xx_uda134x = {
+ .l3 = {
+ .gpio_clk = S3C2410_GPB(4),
+ .gpio_data = S3C2410_GPB(3),
+ .gpio_mode = S3C2410_GPB(2),
+ .use_gpios = 1,
+ .data_hold = 1,
+ .data_setup = 1,
+ .clock_high = 1,
+ .mode_hold = 1,
+ .mode = 1,
+ .mode_setup = 1,
+ },
+ .model = UDA134X_UDA1341,
+};
+
static struct platform_device uda1340_codec = {
.name = "uda134x-codec",
.id = -1,
+ .dev = {
+ .platform_data = &s3c24xx_uda134x,
+ },
};
static struct platform_device *mini2440_devices[] __initdata = {
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
