On 07/08/2016 10:26 AM, Yakir Yang wrote:
Sean,
Thanks for your review.
On 07/02/2016 03:46 AM, Sean Paul wrote:
On Fri, Jul 1, 2016 at 5:19 AM, Yakir Yang <ykk@xxxxxxxxxxxxxx> wrote:
The full name of PSR is Panel Self Refresh, panel device could refresh
itself with the hardware framebuffer in panel, this would make lots of
sense to save the power consumption.
This patch have exported two symbols for platform driver to implement
the PSR function in hardware side:
- analogix_dp_active_psr()
- analogix_dp_inactive_psr()
Signed-off-by: Yakir Yang <ykk@xxxxxxxxxxxxxx>
---
Changes in v3:
- split analogix_dp_enable_psr(), make it more clearly
analogix_dp_detect_sink_psr()
analogix_dp_enable_sink_psr()
- remove some nosie register setting comments
Changes in v2:
- introduce in v2, splite the common Analogix DP changes out
drivers/gpu/drm/bridge/analogix/analogix_dp_core.c | 64
++++++++++++++++++++++
drivers/gpu/drm/bridge/analogix/analogix_dp_core.h | 4 ++
drivers/gpu/drm/bridge/analogix/analogix_dp_reg.c | 54
++++++++++++++++++
drivers/gpu/drm/bridge/analogix/analogix_dp_reg.h | 28 ++++++++++
include/drm/bridge/analogix_dp.h | 3 +
5 files changed, 153 insertions(+)
diff --git a/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c
b/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c
index 32715da..b557097 100644
--- a/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c
+++ b/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c
@@ -97,6 +97,66 @@ static int analogix_dp_detect_hpd(struct
analogix_dp_device *dp)
return 0;
}
+int analogix_dp_active_psr(struct device *dev)
+{
+ struct analogix_dp_device *dp = dev_get_drvdata(dev);
+
+ if (!dp->psr_support)
+ return -EINVAL;
+
+ analogix_dp_send_psr_spd(dp, EDP_VSC_PSR_STATE_ACTIVE |
+ EDP_VSC_PSR_CRC_VALUES_VALID);
+ return 0;
+}
+EXPORT_SYMBOL_GPL(analogix_dp_active_psr);
+
+int analogix_dp_inactive_psr(struct device *dev)
+{
+ struct analogix_dp_device *dp = dev_get_drvdata(dev);
+
+ if (!dp->psr_support)
+ return -EINVAL;
+
+ analogix_dp_send_psr_spd(dp, 0);
+ return 0;
+}
+EXPORT_SYMBOL_GPL(analogix_dp_inactive_psr);
+
+static bool analogix_dp_detect_sink_psr(struct analogix_dp_device *dp)
+{
+ unsigned char psr_version;
+
+ analogix_dp_read_byte_from_dpcd(dp, DP_PSR_SUPPORT,
&psr_version);
+ dev_info(dp->dev, "Panel PSR version : %x\n", psr_version);
+
This info message is likely to be spammy since it's printed everytime
the panel toggle on. Perhaps downgrade to debug level.
Okay, done.
+ return (psr_version & DP_PSR_IS_SUPPORTED) ? true : false;
+}
+
+static int analogix_dp_enable_sink_psr(struct analogix_dp_device *dp)
Return type is int, but the function never fails and you don't check
the return value when calling it. Seems like this should be void.
Done.
+{
+ unsigned char psr_en;
+
+ /* Disable psr function */
+ analogix_dp_read_byte_from_dpcd(dp, DP_PSR_EN_CFG, &psr_en);
+ psr_en &= ~DP_PSR_ENABLE;
+ analogix_dp_write_byte_to_dpcd(dp, DP_PSR_EN_CFG, psr_en);
+
+ /* Main-Link transmitter remains active during PSR active
states */
+ analogix_dp_read_byte_from_dpcd(dp, DP_PSR_EN_CFG, &psr_en);
+ psr_en = DP_PSR_MAIN_LINK_ACTIVE | DP_PSR_CRC_VERIFICATION;
Why read psr_en if you're just going to overwrite it? Perhaps you
meant |= here.
Yes, it's my mistaken, no need to read the DP_PSR_EN_CFG, just
configure it directly is enough.
+ analogix_dp_write_byte_to_dpcd(dp, DP_PSR_EN_CFG, psr_en);
+
+ /* Enable psr function */
+ analogix_dp_read_byte_from_dpcd(dp, DP_PSR_EN_CFG, &psr_en);
+ psr_en = DP_PSR_ENABLE | DP_PSR_MAIN_LINK_ACTIVE |
+ DP_PSR_CRC_VERIFICATION;
Again, no need to read if you're just overwriting.
Yes, ditto
+ analogix_dp_write_byte_to_dpcd(dp, DP_PSR_EN_CFG, psr_en);
+
+ analogix_dp_enable_psr_crc(dp);
+
+ return 0;
+}
+
static unsigned char analogix_dp_calc_edid_check_sum(unsigned char
*edid_data)
{
int i;
@@ -921,6 +981,10 @@ static void analogix_dp_commit(struct
analogix_dp_device *dp)
/* Enable video */
analogix_dp_start_video(dp);
+
+ dp->psr_support = analogix_dp_detect_sink_psr(dp);
+ if (dp->psr_support)
+ analogix_dp_enable_sink_psr(dp);
}
int analogix_dp_get_modes(struct drm_connector *connector)
diff --git a/drivers/gpu/drm/bridge/analogix/analogix_dp_core.h
b/drivers/gpu/drm/bridge/analogix/analogix_dp_core.h
index b456380..6ca5dde 100644
--- a/drivers/gpu/drm/bridge/analogix/analogix_dp_core.h
+++ b/drivers/gpu/drm/bridge/analogix/analogix_dp_core.h
@@ -177,6 +177,7 @@ struct analogix_dp_device {
int hpd_gpio;
bool force_hpd;
unsigned char edid[EDID_BLOCK_LENGTH * 2];
+ bool psr_support;
struct analogix_dp_plat_data *plat_data;
};
@@ -278,4 +279,7 @@ int analogix_dp_is_video_stream_on(struct
analogix_dp_device *dp);
void analogix_dp_config_video_slave_mode(struct analogix_dp_device
*dp);
void analogix_dp_enable_scrambling(struct analogix_dp_device *dp);
void analogix_dp_disable_scrambling(struct analogix_dp_device *dp);
+void analogix_dp_enable_psr_crc(struct analogix_dp_device *dp);
+void analogix_dp_send_psr_spd(struct analogix_dp_device *dp, int db1);
+
#endif /* _ANALOGIX_DP_CORE_H */
diff --git a/drivers/gpu/drm/bridge/analogix/analogix_dp_reg.c
b/drivers/gpu/drm/bridge/analogix/analogix_dp_reg.c
index 48030f0..e8372c7 100644
--- a/drivers/gpu/drm/bridge/analogix/analogix_dp_reg.c
+++ b/drivers/gpu/drm/bridge/analogix/analogix_dp_reg.c
@@ -1322,3 +1322,57 @@ void analogix_dp_disable_scrambling(struct
analogix_dp_device *dp)
reg |= SCRAMBLING_DISABLE;
writel(reg, dp->reg_base + ANALOGIX_DP_TRAINING_PTN_SET);
}
+
+void analogix_dp_enable_psr_crc(struct analogix_dp_device *dp)
+{
+ writel(PSR_VID_CRC_FLUSH | PSR_VID_CRC_ENABLE,
+ dp->reg_base + ANALOGIX_DP_CRC_CON);
+
+ usleep_range(10, 20);
Is this sleep arbitrary, or documented somewhere? Could you add a
comment explaining how this was arrived at?
Yes, this sleep is arbitrary, there is no document about the
Oh, implement reply. I double check the datesheet, oh, i make a mistaken
here. The CRC_FLUSH wasn't a trigger, but a enable gate.
>PSR Video CRC flush enable. The PSR video CRC value is initialized at
every v-sync leading edge.
+ writel(PSR_VID_CRC_ENABLE, dp->reg_base + ANALOGIX_DP_CRC_CON);
So I need to delete this register setting.
Thanks,
- Yakir
+}
+
+void analogix_dp_send_psr_spd(struct analogix_dp_device *dp, int db1)
+{
+ unsigned int val;
+
+ /* don't send info frame */
+ val = readl(dp->reg_base + ANALOGIX_DP_PKT_SEND_CTL);
+ val &= ~IF_EN;
+ writel(val, dp->reg_base + ANALOGIX_DP_PKT_SEND_CTL);
+
+ /* configure single frame update mode */
+ writel(0x3, dp->reg_base + ANALOGIX_DP_PSR_FRAME_UPDATE_CTRL);
+
+ /* configure VSC HB0 ~ HB3 */
+ writel(0x00, dp->reg_base + ANALOGIX_DP_SPD_HB0);
+ writel(0x07, dp->reg_base + ANALOGIX_DP_SPD_HB1);
+ writel(0x02, dp->reg_base + ANALOGIX_DP_SPD_HB2);
+ writel(0x08, dp->reg_base + ANALOGIX_DP_SPD_HB3);
+
+ /* configure VSC HB0 ~ HB3 */
+ writel(0x00, dp->reg_base + ANALOGIX_DP_SPD_PB0);
+ writel(0x16, dp->reg_base + ANALOGIX_DP_SPD_PB1);
+ writel(0xCE, dp->reg_base + ANALOGIX_DP_SPD_PB2);
+ writel(0x5D, dp->reg_base + ANALOGIX_DP_SPD_PB3);
+
+ /* configure DB0 / DB1 values */
+ writel(0x00, dp->reg_base + ANALOGIX_DP_VSC_SHADOW_DB0);
Lots of hardcoded values here. I think this could be cleaned up.
For "HB0~HB3", "PB0~PB3" and "DB1", I don't understand very well.
Those seems to be a kind of head number, I got those magic values from
our IC side. So I think those should be okay to keep the hardcode
values here :-D
But for the "0x3" in "ANALOGIX_DP_PSR_FRAME_UPDATE_CTRL", I would fix
it with suitable macro.
+ writel(db1, dp->reg_base + ANALOGIX_DP_VSC_SHADOW_DB1);
+
+ /* set reuse spd inforframe */
+ val = readl(dp->reg_base + ANALOGIX_DP_VIDEO_CTL_3);
+ val |= REUSE_SPD_EN;
+ writel(val, dp->reg_base + ANALOGIX_DP_VIDEO_CTL_3);
+
+ /* mark info frame update */
+ val = readl(dp->reg_base + ANALOGIX_DP_PKT_SEND_CTL);
+ val = (val | IF_UP) & ~IF_EN;
+ writel(val, dp->reg_base + ANALOGIX_DP_PKT_SEND_CTL);
+
+ /* send info frame */
+ val = readl(dp->reg_base + ANALOGIX_DP_PKT_SEND_CTL);
+ val |= IF_EN;
+ writel(val, dp->reg_base + ANALOGIX_DP_PKT_SEND_CTL);
+}
diff --git a/drivers/gpu/drm/bridge/analogix/analogix_dp_reg.h
b/drivers/gpu/drm/bridge/analogix/analogix_dp_reg.h
index cdcc6c5..a2698e4 100644
--- a/drivers/gpu/drm/bridge/analogix/analogix_dp_reg.h
+++ b/drivers/gpu/drm/bridge/analogix/analogix_dp_reg.h
@@ -22,6 +22,8 @@
#define ANALOGIX_DP_VIDEO_CTL_8 0x3C
#define ANALOGIX_DP_VIDEO_CTL_10 0x44
+#define ANALOGIX_DP_SPDIF_AUDIO_CTL_0 0xD8
+
#define ANALOGIX_DP_PLL_REG_1 0xfc
#define ANALOGIX_DP_PLL_REG_2 0x9e4
#define ANALOGIX_DP_PLL_REG_3 0x9e8
@@ -30,6 +32,21 @@
#define ANALOGIX_DP_PD 0x12c
+#define ANALOGIX_DP_IF_TYPE 0x244
+#define ANALOGIX_DP_IF_PKT_DB1 0x254
+#define ANALOGIX_DP_IF_PKT_DB2 0x258
+#define ANALOGIX_DP_SPD_HB0 0x2F8
+#define ANALOGIX_DP_SPD_HB1 0x2FC
+#define ANALOGIX_DP_SPD_HB2 0x300
+#define ANALOGIX_DP_SPD_HB3 0x304
+#define ANALOGIX_DP_SPD_PB0 0x308
+#define ANALOGIX_DP_SPD_PB1 0x30C
+#define ANALOGIX_DP_SPD_PB2 0x310
+#define ANALOGIX_DP_SPD_PB3 0x314
+#define ANALOGIX_DP_PSR_FRAME_UPDATE_CTRL 0x318
+#define ANALOGIX_DP_VSC_SHADOW_DB0 0x31C
+#define ANALOGIX_DP_VSC_SHADOW_DB1 0x320
+
#define ANALOGIX_DP_LANE_MAP 0x35C
#define ANALOGIX_DP_ANALOG_CTL_1 0x370
@@ -103,6 +120,8 @@
#define ANALOGIX_DP_SOC_GENERAL_CTL 0x800
+#define ANALOGIX_DP_CRC_CON 0x890
+
/* ANALOGIX_DP_TX_SW_RESET */
#define RESET_DP_TX (0x1 << 0)
@@ -151,6 +170,7 @@
#define VID_CHK_UPDATE_TYPE_SHIFT (4)
#define VID_CHK_UPDATE_TYPE_1 (0x1 << 4)
#define VID_CHK_UPDATE_TYPE_0 (0x0 << 4)
+#define REUSE_SPD_EN (0x1 << 3)
/* ANALOGIX_DP_VIDEO_CTL_8 */
#define VID_HRES_TH(x) (((x) & 0xf) << 4)
@@ -376,4 +396,12 @@
#define VIDEO_MODE_SLAVE_MODE (0x1 << 0)
#define VIDEO_MODE_MASTER_MODE (0x0 << 0)
+/* ANALOGIX_DP_PKT_SEND_CTL */
+#define IF_UP (0x1 << 4)
+#define IF_EN (0x1 << 0)
+
+/* ANALOGIX_DP_CRC_CON */
+#define PSR_VID_CRC_FLUSH (0x1 << 2)
+#define PSR_VID_CRC_ENABLE (0x1 << 0)
+
#endif /* _ANALOGIX_DP_REG_H */
diff --git a/include/drm/bridge/analogix_dp.h
b/include/drm/bridge/analogix_dp.h
index 261b86d..183a336 100644
--- a/include/drm/bridge/analogix_dp.h
+++ b/include/drm/bridge/analogix_dp.h
@@ -38,6 +38,9 @@ struct analogix_dp_plat_data {
struct drm_connector *);
};
+int analogix_dp_active_psr(struct device *dev);
+int analogix_dp_inactive_psr(struct device *dev);
Why active/inactive instead of enable/disable, which is used
everywhere else?
Done
Thanks,
- Yakir
+
int analogix_dp_resume(struct device *dev);
int analogix_dp_suspend(struct device *dev);
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
