Hi Benjamin,
Thank you for the patch.
On Thursday 21 Jul 2016 10:52:00 Benjamin Gaignard wrote:
> From: Marek Szyprowski <m.szyprowski@xxxxxxxxxxx>
>
> version 6:
> - add zpos in gpu documentation file
> - merge Ville patch about zpos initial value and API improvement.
> I have split Ville patch between zpos core and drivers
>
> version 5:
> - remove zpos range check and comeback to 0 to N-1
> normalization algorithm
>
> version 4:
> - make sure that normalized zpos value is stay
> in the defined property range and warn user if not
>
> This patch adds support for generic plane's zpos property property with
> well-defined semantics:
> - added zpos properties to plane and plane state structures
> - added helpers for normalizing zpos properties of given set of planes
> - well defined semantics: planes are sorted by zpos values and then plane
> id value if zpos equals
>
> Normalized zpos values are calculated automatically when generic
> muttable zpos property has been initialized. Drivers can simply use
> plane_state->normalized_zpos in their atomic_check and/or plane_update
> callbacks without any additional calls to DRM core.
>
> Signed-off-by: Marek Szyprowski <m.szyprowski@xxxxxxxxxxx>
>
> Compare to Marek's original patch zpos property is now specific to each
> plane and no more to the core.
> Normalize function take care of the range of per plane defined range
> before set normalized_zpos.
>
> Signed-off-by: Benjamin Gaignard <benjamin.gaignard@xxxxxxxxxx>
>
> Cc: Inki Dae <inki.dae@xxxxxxxxxxx>
> Cc: Daniel Vetter <daniel@xxxxxxxx>
> Cc: Ville Syrjala <ville.syrjala@xxxxxxxxxxxxxxx>
> Cc: Joonyoung Shim <jy0922.shim@xxxxxxxxxxx>
> Cc: Seung-Woo Kim <sw0312.kim@xxxxxxxxxxx>
> Cc: Andrzej Hajda <a.hajda@xxxxxxxxxxx>
> Cc: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
> Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@xxxxxxxxxxx>
> Cc: Tobias Jakobi <tjakobi@xxxxxxxxxxxxxxxxxxxxx>
> Cc: Gustavo Padovan <gustavo@xxxxxxxxxxx>
> Cc: vincent.abriou@xxxxxx
> Cc: fabien.dessenne@xxxxxx
> Cc: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
> ---
> Documentation/gpu/kms-properties.csv | 1 +
> drivers/gpu/drm/Makefile | 2 +-
> drivers/gpu/drm/drm_atomic.c | 4 +
> drivers/gpu/drm/drm_atomic_helper.c | 7 +
> drivers/gpu/drm/drm_blend.c | 240 ++++++++++++++++++++++++++++++++
> drivers/gpu/drm/drm_crtc_internal.h | 4 +
> include/drm/drm_crtc.h | 30 +++++
> 7 files changed, 287 insertions(+), 1 deletion(-)
> create mode 100644 drivers/gpu/drm/drm_blend.c
>
> diff --git a/Documentation/gpu/kms-properties.csv
> b/Documentation/gpu/kms-properties.csv index b6fcaf6..3587ea2 100644
> --- a/Documentation/gpu/kms-properties.csv
> +++ b/Documentation/gpu/kms-properties.csv
> @@ -17,6 +17,7 @@ DRM,Generic,“rotation”,BITMASK,"{ 0, ""rotate-0"" }, { 1,
> ""rotate-90"" }, { ,,“CRTC_H”,RANGE,"Min=0, Max=UINT_MAX",Plane,Scanout
> CRTC (destination) height (atomic)
> ,,“FB_ID”,OBJECT,DRM_MODE_OBJECT_FB,Plane,Scanout framebuffer (atomic)
> ,,“CRTC_ID”,OBJECT,DRM_MODE_OBJECT_CRTC,Plane,CRTC that plane is attached
> to (atomic)
> +,,“zpos”,RANGE,"Min=0, Max=UINT_MAX",Plane,Zorder of the plane
How about a real description ? :-) Maybe something like "Z-order of the plane.
Planes with higher Z-order values are displayed on top, planes with identical
Z-order values are display in an undefined order" ?
> ,DVI-I,“subconnector”,ENUM,"{ “Unknown”, “DVI-D”, “DVI-A” }",Connector,TBD
> ,,“select subconnector”,ENUM,"{ “Automatic”, “DVI-D”, “DVI-A”
> }",Connector,TBD ,TV,“subconnector”,ENUM,"{ ""Unknown"", ""Composite"",
> ""SVIDEO"", ""Component"", ""SCART"" }",Connector,TBD
[snip]
> diff --git a/drivers/gpu/drm/drm_blend.c b/drivers/gpu/drm/drm_blend.c
> new file mode 100644
> index 0000000..9567233
> --- /dev/null
> +++ b/drivers/gpu/drm/drm_blend.c
> @@ -0,0 +1,240 @@
> +/*
> + * Copyright (C) 2016 Samsung Electronics Co.Ltd
> + * Authors:
> + * Marek Szyprowski <m.szyprowski@xxxxxxxxxxx>
> + *
> + * DRM core plane blending related functions
> + *
> + * Permission to use, copy, modify, distribute, and sell this software and
> its + * documentation for any purpose is hereby granted without fee,
> provided that + * the above copyright notice appear in all copies and that
> both that copyright + * notice and this permission notice appear in
> supporting documentation, and + * that the name of the copyright holders
> not be used in advertising or + * publicity pertaining to distribution of
> the software without specific, + * written prior permission. The copyright
> holders make no representations + * about the suitability of this software
> for any purpose. It is provided "as + * is" without express or implied
> warranty.
> + *
> + * THE COPYRIGHT HOLDERS DISCLAIM ALL WARRANTIES WITH REGARD TO THIS
> SOFTWARE, + * INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND
> FITNESS, IN NO + * EVENT SHALL THE COPYRIGHT HOLDERS BE LIABLE FOR ANY
> SPECIAL, INDIRECT OR + * CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER
> RESULTING FROM LOSS OF USE, + * DATA OR PROFITS, WHETHER IN AN ACTION OF
> CONTRACT, NEGLIGENCE OR OTHER + * TORTIOUS ACTION, ARISING OUT OF OR IN
> CONNECTION WITH THE USE OR PERFORMANCE + * OF THIS SOFTWARE.
> + */
> +#include <drm/drmP.h>
> +#include <drm/drm_atomic.h>
> +#include <drm/drm_crtc.h>
> +#include <linux/export.h>
> +#include <linux/slab.h>
> +#include <linux/sort.h>
> +
> +#include "drm_internal.h"
> +
> +/**
> + * drm_plane_create_zpos_property - create mutable zpos property
> + * @plane: drm plane
> + * @zpos: initial value of zpos property
> + * @min: minimal possible value of zpos property
> + * @max: maximal possible value of zpos property
> + *
> + * This function initializes generic mutable zpos property and enables
> support + * for it in drm core. Drivers can then attach this property to
> planes to enable + * support for configurable planes arrangement during
> blending operation. + * Once mutable zpos property has been enabled, the
> DRM core will automatically + * calculate drm_plane_state->normalized_zpos
> values. Usually min should be set + * to 0 and max to maximal number of
> planes for given crtc - 1.
> + *
> + * If zpos of some planes cannot be changed (like fixed background or
> + * cursor/topmost planes), driver should adjust min/max values and assign
> those + * planes immutable zpos property with lower or higher values (for
> more + * information, see drm_mode_create_zpos_immutable_property()
> function). In such + * case driver should also assign proper initial zpos
> values for all planes in + * its plane_reset() callback, so the planes will
> be always sorted properly. + *
> + * Returns:
> + * Zero on success, negative errno on failure.
> + */
> +int drm_plane_create_zpos_property(struct drm_plane *plane,
> + unsigned int zpos,
> + unsigned int min, unsigned int max)
> +{
> + struct drm_property *prop;
> +
> + prop = drm_property_create_range(plane->dev, 0, "zpos", min, max);
> + if (!prop)
> + return -ENOMEM;
> +
> + drm_object_attach_property(&plane->base, prop, zpos);
> +
> + plane->zpos_property = prop;
> +
> + if (plane->state) {
> + plane->state->zpos = zpos;
> + plane->state->normalized_zpos = zpos;
> + }
> +
> + return 0;
> +}
> +EXPORT_SYMBOL(drm_plane_create_zpos_property);
> +
> +/**
> + * drm_plane_create_zpos_immutable_property - create immuttable zpos
> property + * @plane: drm plane
> + * @zpos: value of zpos property
> + *
> + * This function initializes generic immutable zpos property and enables
> + * support for it in drm core. Using this property driver lets userspace
> + * to get the arrangement of the planes for blending operation and notifies
> + * it that the hardware (or driver) doesn't support changing of the
> planes' + * order.
> + *
> + * Returns:
> + * Zero on success, negative errno on failure.
> + */
> +int drm_plane_create_zpos_immutable_property(struct drm_plane *plane,
> + unsigned int zpos)
> +{
> + struct drm_property *prop;
> +
> + prop = drm_property_create_range(plane->dev, DRM_MODE_PROP_IMMUTABLE,
> + "zpos", zpos, zpos);
> + if (!prop)
> + return -ENOMEM;
> +
> + drm_object_attach_property(&plane->base, prop, zpos);
> +
> + plane->zpos_property = prop;
> +
> + if (plane->state) {
> + plane->state->zpos = zpos;
> + plane->state->normalized_zpos = zpos;
> + }
> +
> + return 0;
> +}
> +EXPORT_SYMBOL(drm_plane_create_zpos_immutable_property);
> +
> +static int drm_atomic_state_zpos_cmp(const void *a, const void *b)
> +{
> + const struct drm_plane_state *sa = *(struct drm_plane_state **)a;
> + const struct drm_plane_state *sb = *(struct drm_plane_state **)b;
> +
> + if (sa->zpos != sb->zpos)
> + return sa->zpos - sb->zpos;
> + else
> + return sa->plane->base.id - sb->plane->base.id;
> +}
> +
> +/**
> + * drm_atomic_helper_crtc_normalize_zpos - calculate normalized zpos values
> + * @crtc: crtc with planes, which have to be considered for normalization
> + * @crtc_state: new atomic state to apply
> + *
> + * This function checks new states of all planes assigned to given crtc and
> + * calculates normalized zpos value for them. Planes are compared first by
> their + * zpos values, then by plane id (if zpos equals). Plane with lowest
> zpos value + * is at the bottom. The plane_state->normalized_zpos is then
> filled with unique + * values from 0 to number of active planes in crtc
> minus one.
> + *
> + * RETURNS
> + * Zero for success or -errno
> + */
> +int drm_atomic_helper_crtc_normalize_zpos(struct drm_crtc *crtc,
> + struct drm_crtc_state *crtc_state)
As Ville mentioned I think you can make this function static.
> +{
> + struct drm_atomic_state *state = crtc_state->state;
> + struct drm_device *dev = crtc->dev;
> + int total_planes = dev->mode_config.num_total_plane;
> + struct drm_plane_state **states;
> + struct drm_plane *plane;
> + int i, n = 0;
> + int ret = 0;
> +
> + DRM_DEBUG_ATOMIC("[CRTC:%d:%s] calculating normalized zpos values\n",
> + crtc->base.id, crtc->name);
> +
> + states = kmalloc_array(total_planes, sizeof(*states), GFP_TEMPORARY);
> + if (!states)
> + return -ENOMEM;
> +
> + /*
> + * Normalization process might create new states for planes which
> + * normalized_zpos has to be recalculated.
> + */
> + drm_for_each_plane_mask(plane, dev, crtc_state->plane_mask) {
> + struct drm_plane_state *plane_state =
> + drm_atomic_get_plane_state(state, plane);
> + if (IS_ERR(plane_state)) {
> + ret = PTR_ERR(plane_state);
> + goto done;
> + }
> + states[n++] = plane_state;
> + DRM_DEBUG_ATOMIC("[PLANE:%d:%s] processing zpos value %d\n",
> + plane->base.id, plane->name,
> + plane_state->zpos);
> + }
> +
> + sort(states, n, sizeof(*states), drm_atomic_state_zpos_cmp, NULL);
> +
> + for (i = 0; i < n; i++) {
> + plane = states[i]->plane;
> +
> + states[i]->normalized_zpos = i;
> + DRM_DEBUG_ATOMIC("[PLANE:%d:%s] normalized zpos value %d\n",
> + plane->base.id, plane->name, i);
> + }
> + crtc_state->zpos_changed = true;
> +
> +done:
> + kfree(states);
> + return ret;
> +}
> +EXPORT_SYMBOL(drm_atomic_helper_crtc_normalize_zpos);
> +
> +/**
> + * drm_atomic_helper_normalize_zpos - calculate normalized zpos values for
> all + * crtcs
> + * @dev: DRM device
> + * @state: atomic state of DRM device
> + *
> + * This function calculates normalized zpos value for all modified planes
> in + * the provided atomic state of DRM device. For more information, see +
> * drm_atomic_helper_crtc_normalize_zpos() function.
> + *
> + * RETURNS
> + * Zero for success or -errno
> + */
> +int drm_atomic_helper_normalize_zpos(struct drm_device *dev,
> + struct drm_atomic_state *state)
> +{
> + struct drm_crtc *crtc;
> + struct drm_crtc_state *crtc_state;
> + struct drm_plane *plane;
> + struct drm_plane_state *plane_state;
> + int i, ret = 0;
> +
> + for_each_plane_in_state(state, plane, plane_state, i) {
> + crtc = plane_state->crtc;
> + if (!crtc)
> + continue;
> + if (plane->state->zpos != plane_state->zpos) {
> + crtc_state =
> + drm_atomic_get_existing_crtc_state(state,
crtc);
> + crtc_state->zpos_changed = true;
> + }
> + }
> +
> + for_each_crtc_in_state(state, crtc, crtc_state, i) {
> + if (crtc_state->plane_mask != crtc->state->plane_mask ||
> + crtc_state->zpos_changed) {
> + ret = drm_atomic_helper_crtc_normalize_zpos(crtc,
> +
crtc_state);
> + if (ret)
> + return ret;
> + }
> + }
> + return 0;
> +}
> +EXPORT_SYMBOL(drm_atomic_helper_normalize_zpos);
And this one doesn't need to be exported as it's called by the DRM core only.
[snip]
> diff --git a/include/drm/drm_crtc.h b/include/drm/drm_crtc.h
> index 9e6ab4a..69c2092 100644
> --- a/include/drm/drm_crtc.h
> +++ b/include/drm/drm_crtc.h
> @@ -308,6 +308,7 @@ struct drm_plane_helper_funcs;
> * @mode_changed: crtc_state->mode or crtc_state->enable has been changed
> * @active_changed: crtc_state->active has been toggled.
> * @connectors_changed: connectors to this crtc have been updated
> + * @zpos_changed: zpos values of planes on this crtc have been updated
> * @color_mgmt_changed: color management properties have changed (degamma
> or * gamma LUT or CSC matrix)
> * @plane_mask: bitmask of (1 << drm_plane_index(plane)) of attached planes
> @@ -344,6 +345,7 @@ struct drm_crtc_state {
> bool mode_changed : 1;
> bool active_changed : 1;
> bool connectors_changed : 1;
> + bool zpos_changed : 1;
> bool color_mgmt_changed : 1;
>
> /* attached planes bitmask:
> @@ -1396,6 +1398,9 @@ struct drm_connector {
> * @src_w: width of visible portion of plane (in 16.16)
> * @src_h: height of visible portion of plane (in 16.16)
> * @rotation: rotation of the plane
> + * @zpos: priority of the given plane on crtc (optional)
> + * @normalized_zpos: normalized value of zpos: unique, range from 0 to N-1
> + * for given crtc
You might want to define N.
Apart from that,
Acked-by: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
Tested-by: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
> * @state: backpointer to global drm_atomic_state
> */
> struct drm_plane_state {
> @@ -1416,6 +1421,10 @@ struct drm_plane_state {
> /* Plane rotation */
> unsigned int rotation;
>
> + /* Plane zpos */
> + unsigned int zpos;
> + unsigned int normalized_zpos;
> +
> struct drm_atomic_state *state;
> };
[snip]
--
Regards,
Laurent Pinchart
--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
