Sean, On 07/14/2016 10:46 PM, Sean Paul wrote:
On Thu, Jul 14, 2016 at 12:15:44PM +0800, Yakir Yang wrote:VOP have integrated a hardware counter which indicate the exact display line that vop is scanning. And if we're interested in a specific line, we can set the line number to vop line_flag register, and then vop would generate a line_flag interrupt for it. For example eDP PSR function is interested in the vertical blanking period, then driver could set the line number to zero. This patch have exported a symbol that allow other driver to listen the line flag event with given timeout limit: - rockchip_drm_wait_line_flag() Signed-off-by: Yakir Yang <ykk@xxxxxxxxxxxxxx> --- Changes in v4: - Avoid the weird behavior in rockchip_drm_wait_line_flag(). (Sean) - Make line_flag_num_x to an array. (Sean) - Remove the unused vop_cfg_done() in vop_line_flag_irq_enable(). (Stephane, reviewed in Google gerrit) [https://chromium-review.googlesource.com/#/c/349084/33/drivers/gpu/drm/rockchip/rockchip_drm_vop.c@466] Changes in v3: - Export the 'rockchip_drm_wait_line_flag' symbol, and document it. - Add 'line_flag_num_0' for RK3288/RK3036 - Remove the notify for waiting line_flag event (Daniel) Changes in v2: - Introduce in v2, split VOP line flag changes out drivers/gpu/drm/rockchip/rockchip_drm_drv.h | 3 + drivers/gpu/drm/rockchip/rockchip_drm_vop.c | 118 ++++++++++++++++++++++++++++ drivers/gpu/drm/rockchip/rockchip_drm_vop.h | 2 + drivers/gpu/drm/rockchip/rockchip_vop_reg.c | 4 + 4 files changed, 127 insertions(+) diff --git a/drivers/gpu/drm/rockchip/rockchip_drm_drv.h b/drivers/gpu/drm/rockchip/rockchip_drm_drv.h index ea39329..239b830 100644 --- a/drivers/gpu/drm/rockchip/rockchip_drm_drv.h +++ b/drivers/gpu/drm/rockchip/rockchip_drm_drv.h @@ -70,4 +70,7 @@ int rockchip_drm_dma_attach_device(struct drm_device *drm_dev, struct device *dev); void rockchip_drm_dma_detach_device(struct drm_device *drm_dev, struct device *dev); +int rockchip_drm_wait_line_flag(struct drm_crtc *crtc, unsigned int line_num, + unsigned int mstimeout); + #endif /* _ROCKCHIP_DRM_DRV_H_ */ diff --git a/drivers/gpu/drm/rockchip/rockchip_drm_vop.c b/drivers/gpu/drm/rockchip/rockchip_drm_vop.c index c8a62a8..69d32f1 100644 --- a/drivers/gpu/drm/rockchip/rockchip_drm_vop.c +++ b/drivers/gpu/drm/rockchip/rockchip_drm_vop.c @@ -121,6 +121,8 @@ struct vop { /* protected by dev->event_lock */ struct drm_pending_vblank_event *event;+ struct completion line_flag_completion;+ const struct vop_data *data;uint32_t *regsbak;@@ -431,6 +433,71 @@ static void vop_dsp_hold_valid_irq_disable(struct vop *vop) spin_unlock_irqrestore(&vop->irq_lock, flags); }+/*+ * (1) each frame starts at the start of the Vsync pulse which is signaled by + * the "FRAME_SYNC" interrupt. + * (2) the active data region of each frame ends at dsp_vact_end + * (3) we should program this same number (dsp_vact_end) into dsp_line_frag_num, + * to get "LINE_FLAG" interrupt at the end of the active on screen data. + * + * VOP_INTR_CTRL0.dsp_line_frag_num = VOP_DSP_VACT_ST_END.dsp_vact_end + * Interrupts + * LINE_FLAG -------------------------------+ + * FRAME_SYNC ----+ | + * | | + * v v + * | Vsync | Vbp | Vactive | Vfp | + * ^ ^ ^ ^ + * | | | | + * | | | | + * dsp_vs_end ------------+ | | | VOP_DSP_VTOTAL_VS_END + * dsp_vact_start --------------+ | | VOP_DSP_VACT_ST_END + * dsp_vact_end ----------------------------+ | VOP_DSP_VACT_ST_END + * dsp_total -------------------------------------+ VOP_DSP_VTOTAL_VS_END + */ +static bool vop_line_flag_irq_is_enabled(struct vop *vop) +{ + uint32_t line_flag_irq; + unsigned long flags; + + spin_lock_irqsave(&vop->irq_lock, flags); + + line_flag_irq = VOP_INTR_GET_TYPE(vop, enable, LINE_FLAG_INTR); + + spin_unlock_irqrestore(&vop->irq_lock, flags); + + return !!line_flag_irq; +} + +static void vop_line_flag_irq_enable(struct vop *vop, int line_num) +{ + unsigned long flags; + + if (WARN_ON(!vop->is_enabled)) + return; + + spin_lock_irqsave(&vop->irq_lock, flags); + + VOP_CTRL_SET(vop, line_flag_num[0], line_num); + VOP_INTR_SET_TYPE(vop, enable, LINE_FLAG_INTR, 1); + + spin_unlock_irqrestore(&vop->irq_lock, flags); +} + +static void vop_line_flag_irq_disable(struct vop *vop) +{ + unsigned long flags; + + if (WARN_ON(!vop->is_enabled)) + return; + + spin_lock_irqsave(&vop->irq_lock, flags); + + VOP_INTR_SET_TYPE(vop, enable, LINE_FLAG_INTR, 0); + + spin_unlock_irqrestore(&vop->irq_lock, flags); +} + static void vop_enable(struct drm_crtc *crtc) { struct vop *vop = to_vop(crtc); @@ -1157,6 +1224,13 @@ static irqreturn_t vop_isr(int irq, void *data) ret = IRQ_HANDLED; }+ if (active_irqs & LINE_FLAG_INTR) {+ if (!completion_done(&vop->line_flag_completion)) + complete(&vop->line_flag_completion);You still have the completion_done/complete here. If you just call complete() without checking if it's done, you'll remove the race I mentioned in my first review.
Ah, forget to update this one, will send a new v4.1 patch to fix it. Thanks a lot, - Yakir
Sean+ active_irqs &= ~LINE_FLAG_INTR; + ret = IRQ_HANDLED; + } + if (active_irqs & FS_INTR) { drm_crtc_handle_vblank(crtc); vop_handle_vblank(vop); @@ -1255,6 +1329,7 @@ static int vop_create_crtc(struct vop *vop)init_completion(&vop->dsp_hold_completion);init_completion(&vop->wait_update_complete); + init_completion(&vop->line_flag_completion); crtc->port = port; rockchip_register_crtc_funcs(crtc, &private_crtc_funcs);@@ -1411,6 +1486,49 @@ static void vop_win_init(struct vop *vop)} }+/**+ * rockchip_drm_wait_line_flag - acqiure the give line flag event + * @crtc: CRTC to enable line flag + * @line_num: interested line number + * @mstimeout: millisecond for timeout + * + * Driver would hold here until the interested line flag interrupt have + * happened or timeout to wait. + * + * Returns: + * Zero on success, negative errno on failure. + */ +int rockchip_drm_wait_line_flag(struct drm_crtc *crtc, unsigned int line_num, + unsigned int mstimeout) +{ + struct vop *vop = to_vop(crtc); + unsigned long jiffies_left; + + if (!crtc || !vop->is_enabled) + return -ENODEV; + + if (line_num > crtc->mode.vtotal || mstimeout <= 0) + return -EINVAL; + + if (vop_line_flag_irq_is_enabled(vop)) + return -EBUSY; + + reinit_completion(&vop->line_flag_completion); + vop_line_flag_irq_enable(vop, line_num); + + jiffies_left = wait_for_completion_timeout(&vop->line_flag_completion, + msecs_to_jiffies(mstimeout)); + vop_line_flag_irq_disable(vop); + + if (jiffies_left == 0) { + dev_err(vop->dev, "Timeout waiting for IRQ\n"); + return -ETIMEDOUT; + } + + return 0; +} +EXPORT_SYMBOL(rockchip_drm_wait_line_flag); + static int vop_bind(struct device *dev, struct device *master, void *data) { struct platform_device *pdev = to_platform_device(dev); diff --git a/drivers/gpu/drm/rockchip/rockchip_drm_vop.h b/drivers/gpu/drm/rockchip/rockchip_drm_vop.h index ff4f52e..1dbc526 100644 --- a/drivers/gpu/drm/rockchip/rockchip_drm_vop.h +++ b/drivers/gpu/drm/rockchip/rockchip_drm_vop.h @@ -61,6 +61,8 @@ struct vop_ctrl { struct vop_reg hpost_st_end; struct vop_reg vpost_st_end;+ struct vop_reg line_flag_num[2];+ struct vop_reg cfg_done; };diff --git a/drivers/gpu/drm/rockchip/rockchip_vop_reg.c b/drivers/gpu/drm/rockchip/rockchip_vop_reg.cindex 6f42e56..eea8427 100644 --- a/drivers/gpu/drm/rockchip/rockchip_vop_reg.c +++ b/drivers/gpu/drm/rockchip/rockchip_vop_reg.c @@ -122,6 +122,7 @@ static const struct vop_ctrl rk3036_ctrl_data = { .hact_st_end = VOP_REG(RK3036_DSP_HACT_ST_END, 0x1fff1fff, 0), .vtotal_pw = VOP_REG(RK3036_DSP_VTOTAL_VS_END, 0x1fff1fff, 0), .vact_st_end = VOP_REG(RK3036_DSP_VACT_ST_END, 0x1fff1fff, 0), + .line_flag_num[0] = VOP_REG(RK3036_INT_STATUS, 0xfff, 12), .cfg_done = VOP_REG(RK3036_REG_CFG_DONE, 0x1, 0), };@@ -221,6 +222,7 @@ static const struct vop_ctrl rk3288_ctrl_data = {.vact_st_end = VOP_REG(RK3288_DSP_VACT_ST_END, 0x1fff1fff, 0), .hpost_st_end = VOP_REG(RK3288_POST_DSP_HACT_INFO, 0x1fff1fff, 0), .vpost_st_end = VOP_REG(RK3288_POST_DSP_VACT_INFO, 0x1fff1fff, 0), + .line_flag_num[0] = VOP_REG(RK3288_INTR_CTRL0, 0x1fff, 12), .cfg_done = VOP_REG(RK3288_REG_CFG_DONE, 0x1, 0), };@@ -299,6 +301,8 @@ static const struct vop_ctrl rk3399_ctrl_data = {.vact_st_end = VOP_REG(RK3399_DSP_VACT_ST_END, 0x1fff1fff, 0), .hpost_st_end = VOP_REG(RK3399_POST_DSP_HACT_INFO, 0x1fff1fff, 0), .vpost_st_end = VOP_REG(RK3399_POST_DSP_VACT_INFO, 0x1fff1fff, 0), + .line_flag_num[0] = VOP_REG(RK3399_LINE_FLAG, 0xffff, 0), + .line_flag_num[1] = VOP_REG(RK3399_LINE_FLAG, 0xffff, 16), .cfg_done = VOP_REG_MASK(RK3399_REG_CFG_DONE, 0x1, 0), };--1.9.1 _______________________________________________ dri-devel mailing list dri-devel@xxxxxxxxxxxxxxxxxxxxx https://lists.freedesktop.org/mailman/listinfo/dri-devel
-- To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
