Linux Samsung SOC

• Thread Index

• Re: [PATCH 3/6] ARM: dts: exynos: Interrupt for USB DWC3-1 differs between Exynos5420 and 5410
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH 4/6] ARM: dts: exynos: Add Thermal Management Unit to Exynos5410
  • From: Javier Martinez Canillas <javier@xxxxxxxxxxxxxxx>
• Re: [PATCH 3/6] ARM: dts: exynos: Interrupt for USB DWC3-1 differs between Exynos5420 and 5410
  • From: Javier Martinez Canillas <javier@xxxxxxxxxxxxxxx>
• Re: [PATCH 2/6] clk: samsung: exynos5410: Add TMU clock
  • From: Javier Martinez Canillas <javier@xxxxxxxxxxxxxxx>
• Re: [PATCH 1/6] dt-bindings: clock: Add TMU clock ID to Exynos5410
  • From: Javier Martinez Canillas <javier@xxxxxxxxxxxxxxx>
• [PATCH 2/6] clk: samsung: exynos5410: Add TMU clock
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• [PATCH 5/6] ARM: dts: exynos: Configure PWM, usb3503, PMIC and thermal on Odroid XU board
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• [PATCH 6/6] ARM: dts: exynos: No need to enable TMU nodes on Odroid XU3 family
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• [PATCH 4/6] ARM: dts: exynos: Add Thermal Management Unit to Exynos5410
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• [PATCH 3/6] ARM: dts: exynos: Interrupt for USB DWC3-1 differs between Exynos5420 and 5410
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• [PATCH 1/6] dt-bindings: clock: Add TMU clock ID to Exynos5410
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [RFC v2] dma-mapping: Use unsigned long for dma_attrs
  • From: Konrad Rzeszutek Wilk <konrad.wilk@xxxxxxxxxx>
• Re: [RFC v2] dma-mapping: Use unsigned long for dma_attrs
  • From: Christoph Hellwig <hch@xxxxxxxxxxxxx>
• Re: [PATCH 2/3] drm/exynos: fimd: add HW trigger support
  • From: Marc Zyngier <maz@xxxxxxxxxxxxxxx>
• Re: [RFC PATCH v1 0/2]
  • From: Daniel Vetter <daniel@xxxxxxxx>
• Re: [RFC PATCH v1 1/2] drm/rockchip: add a notify event about vblank enable/disable
  • From: Daniel Vetter <daniel@xxxxxxxx>
• [PATCH v2 2/2] serial: samsung: Fix possible out of bounds access on non-DT platform
  • From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
• [PATCH v2 1/2] serial: samsung: Fix ERR pointer dereference on deferred probe
  • From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
• [RFC PATCH v1 2/2] drm/rockchip: analogix: add eDP PSR function
  • From: Yakir Yang <ykk@xxxxxxxxxxxxxx>
• [RFC PATCH v1 1/2] drm/rockchip: add a notify event about vblank enable/disable
  • From: Yakir Yang <ykk@xxxxxxxxxxxxxx>
• [RFC PATCH v1 0/2]
  • From: Yakir Yang <ykk@xxxxxxxxxxxxxx>
• Re: [RFC v2 00/13] usb/mmc/power: Fix USB/LAN when TFTP booting
  • From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
• [PATCH] serial: samsung: Fix ERR pointer dereference on deferred probe
  • From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
• Re: [PATCH] crypto: s5p-sss - Use consistent indentation for variables and members
  • From: Herbert Xu <herbert@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v5 00/22] ARM: dts: exynos: Add initial support for Odroid XU
  • From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
• Re: [RFC v2 00/13] usb/mmc/power: Fix USB/LAN when TFTP booting
  • From: Peter Chen <hzpeterchen@xxxxxxxxx>
• [PATCH] drm/exynos: fimd: don't set .has_hw_trigger in s3c6400 driver data
  • From: Javier Martinez Canillas <javier@xxxxxxxxxxxxxxx>
• Re: [PATCH 2/3] drm/exynos: fimd: add HW trigger support
  • From: Javier Martinez Canillas <javier@xxxxxxxxxxxxxxx>
• Re: [PATCH] dwc3-exynos: Fix deferred probing storm.
  • From: "Steinar H. Gunderson" <sgunderson@xxxxxxxxxxx>
• Re: [PATCH v5 00/22] ARM: dts: exynos: Add initial support for Odroid XU
  • From: Sylwester Nawrocki <s.nawrocki@xxxxxxxxxxx>
• Re: [PATCH] clk: samsung: exynos7: Don't gate CMU_{CCORE, FSYS0} blocks clock
  • From: Sylwester Nawrocki <s.nawrocki@xxxxxxxxxxx>
• Re: [PATCH 1/2] clk: exynos5420: Set ID for aclk333 gate clock
  • From: Sylwester Nawrocki <s.nawrocki@xxxxxxxxxxx>
• [RFC v2] dma-mapping: Use unsigned long for dma_attrs
  • From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
• [RFC v2] Change dma_attrs from bitfield to unsigned long
  • From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
• Re: [PATCH] ARM: dts: exynos: Remove unneded always-on for regulators on Peach boards
  • From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
• Re: [PATCH 2/2] ARM: dts: Add async-bridge clock to MFC power domain for Exynos5420
  • From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
• Re: [PATCH v4 5/7] ARM: Exynos: remove code for MFC custom reserved memory handling
  • From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
• Re: [PATCH 3/7] ARM: exynos_defconfig: enable Exynos DRM Mixer driver
  • From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
• Re: [PATCH 1/2] ARM: exynos_defconfig: Enable MFC driver as module
  • From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
• Re: [PATCH] ARM: exynos_defconfig: Disable big.LITTLE switcher
  • From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
• [GIT PULL] ARM: exynos: Fixes for v4.7
  • From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
• Re: [PATCH] crypto: s5p-sss - Use consistent indentation for variables and members
  • From: Vladimir Zapolskiy <vz@xxxxxxxxx>
• [PATCH v5 00/22] ARM: dts: exynos: Add initial support for Odroid XU
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• [PATCH v5 01/22] dt-bindings: clock: Add license and reformat Exynos5410 clock IDs
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• [PATCH v5 02/22] dt-bindings: clock: Add PWM and USB clock IDs to Exynos5410
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• [PATCH v5 04/22] ARM: dts: exynos: Re-order alphabetically Exynos5420 SD0/SD1 pinctrl nodes
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• [PATCH v5 03/22] clk: samsung: exynos5410: Add serial3, USB and PWM clocks
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• [PATCH v5 06/22] ARM: dts: exynos: Configure Exynos5410 pinctrl for eMMC and SD card
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• [PATCH v5 05/22] ARM: dts: exynos: Use lowercase for Exynos5410 CPU node labels
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• [PATCH v5 07/22] ARM: dts: exynos: Split Odroid XU3 LEDs to separate DTSI
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• [PATCH v5 08/22] ARM: dts: exynos: Move common nodes to exynos5.dtsi
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• [PATCH v5 09/22] ARM: dts: exynos: Prepare for inclusion of exynos5.dtsi in exynos5410.dtsi
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• [PATCH v5 12/22] ARM: dts: exynos: Include common exynos5 in exynos5410.dtsi
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• [PATCH v5 14/22] ARM: dts: exynos: MCT is not an interrupt controller and extend length of iomap
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• [PATCH v5 16/22] ARM: dts: exynos: Add USB to Exynos5410
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• [PATCH v5 15/22] ARM: dts: exynos: Move common Exynos5410/542x/5800 nodes to new DTSI
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• [PATCH v5 17/22] ARM: dts: exynos: Add initial support for Odroid XU board
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• [PATCH v5 18/22] dt-bindings: clock: Add I2C, HSI2C and RTC clock IDs to Exynos5410
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• [PATCH v5 19/22] clk: samsung: exynos5410: Add I2C, HSI2C and RTC clocks
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• [PATCH v5 21/22] ARM: dts: exynos: Add I2C, PWM and UART pinctrl to Exynos5410
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• [PATCH v5 20/22] ARM: dts: exynos: Move HSI2C nodes to exynos54xx.dtsi
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• [PATCH v5 22/22] ARM: dts: exynos: Add RTC and I2C to Exynos5410
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• [PATCH v5 13/22] ARM: dts: exynos: Enable UART3 on Exynos5410
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• [PATCH v5 10/22] ARM: dts: exynos: Use phandle to get parent node in exynos5250-snow
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [RFC v2 00/13] usb/mmc/power: Fix USB/LAN when TFTP booting
  • From: Peter Chen <hzpeterchen@xxxxxxxxx>
• Re: [PATCH v4 6/7] ARM: dts: exynos: convert MFC device to generic reserved memory bindings
  • From: Javier Martinez Canillas <javier@xxxxxxxxxxxxxxx>
• Re: [PATCH v4 2/7] media: s5p-mfc: use generic reserved memory bindings
  • From: Javier Martinez Canillas <javier@xxxxxxxxxxxxxxx>
• Re: [PATCH] dwc3-exynos: Fix deferred probing storm.
  • From: Felipe Balbi <balbi@xxxxxxxxxx>
• Re: [PATCH] dwc3-exynos: Fix deferred probing storm.
  • From: "Steinar H. Gunderson" <sgunderson@xxxxxxxxxxx>
• [PATCH v2] dwc3-exynos: Fix deferred probing storm.
  • From: "Steinar H. Gunderson" <sesse@xxxxxxxxxx>
• Re: [PATCH] dwc3-exynos: Fix deferred probing storm.
  • From: Felipe Balbi <balbi@xxxxxxxxxx>
• Re: [PATCH] dwc3-exynos: Fix deferred probing storm.
  • From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
• [PATCH] crypto: s5p-sss - Use consistent indentation for variables and members
  • From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
• Re: [PATCH] dwc3-exynos: Fix deferred probing storm.
  • From: "Steinar H. Gunderson" <sgunderson@xxxxxxxxxxx>
• Re: [PATCH v4 6/7] ARM: dts: exynos: convert MFC device to generic reserved memory bindings
  • From: Marek Szyprowski <m.szyprowski@xxxxxxxxxxx>
• Re: [PATCH] dwc3-exynos: Fix deferred probing storm.
  • From: Vivek Gautam <gautamvivek1987@xxxxxxxxx>
• Re: [PATCH] Re: Endless "supply vcc not found, using dummy regulator"
  • From: Vivek Gautam <gautamvivek1987@xxxxxxxxx>
• Re: [PATCH] Re: Endless "supply vcc not found, using dummy regulator"
  • From: "Steinar H. Gunderson" <sgunderson@xxxxxxxxxxx>
• Re: [PATCH] Re: Endless "supply vcc not found, using dummy regulator"
  • From: Vivek Gautam <gautamvivek1987@xxxxxxxxx>
• Re: [PATCH] pinctrl: samsung: Suppress unbinding to prevent theoretical attacks
  • From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
• Re: [PATCH v4 2/7] media: s5p-mfc: use generic reserved memory bindings
  • From: Marek Szyprowski <m.szyprowski@xxxxxxxxxxx>
• Re: [PATCH v4 2/7] media: s5p-mfc: use generic reserved memory bindings
  • From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
• Re: [PATCH v2 0/10] Add RK3399 eDP support and fix some bugs to analogix_dp driver.
  • From: Yakir Yang <ykk@xxxxxxxxxxxxxx>
• Re: [PATCH v4 1/7] of: reserved_mem: add support for using more than one region for given device
  • From: Rob Herring <robh@xxxxxxxxxx>
• [RESEND RFT PATCH 1/2] mfd: max14577: Use module_init() instead of subsys_initcall()
  • From: Javier Martinez Canillas <javier@xxxxxxxxxxxxxxx>
• [RESEND RFT PATCH 2/2] mfd: max14577: Allow driver to be built as a module
  • From: Javier Martinez Canillas <javier@xxxxxxxxxxxxxxx>
• [RESEND RFT PATCH 0/2] mfd: max14577: Allow the driver to be built as a module
  • From: Javier Martinez Canillas <javier@xxxxxxxxxxxxxxx>
• Re: [patch v2] PM / devfreq: exynos-nocp: Remove incorrect IS_ERR() check
  • From: Dan Carpenter <dan.carpenter@xxxxxxxxxx>
• Re: [patch v2] PM / devfreq: exynos-nocp: Remove incorrect IS_ERR() check
  • From: Julia Lawall <julia.lawall@xxxxxxx>
• Re: [patch v2] PM / devfreq: exynos-nocp: Remove incorrect IS_ERR() check
  • From: Chanwoo Choi <cwchoi00@xxxxxxxxx>
• Re: [patch v2] PM / devfreq: exynos-nocp: Remove incorrect IS_ERR() check
  • From: Dan Carpenter <dan.carpenter@xxxxxxxxxx>
• Re: [patch v2] PM / devfreq: exynos-nocp: Remove incorrect IS_ERR() check
  • From: Julia Lawall <julia.lawall@xxxxxxx>
• Re: [patch v2] PM / devfreq: exynos-nocp: Remove incorrect IS_ERR() check
  • From: Chanwoo Choi <cwchoi00@xxxxxxxxx>
• Re: [PATCH] Re: Endless "supply vcc not found, using dummy regulator"
  • From: "Steinar H. Gunderson" <sgunderson@xxxxxxxxxxx>
• Re: [PATCH v2 0/10] Add RK3399 eDP support and fix some bugs to analogix_dp driver.
  • From: Javier Martinez Canillas <javier@xxxxxxxxxxxxxxx>
• Re: ARM: dts: exynos: Add MFC memory banks for Peach boards
  • From: Javier Martinez Canillas <javier@xxxxxxxxxxxxxxx>
• Re: [patch v2] PM / devfreq: exynos-nocp: Remove incorrect IS_ERR() check
  • From: Dan Carpenter <dan.carpenter@xxxxxxxxxx>
• Re: [patch v2] PM / devfreq: exynos-nocp: Remove incorrect IS_ERR() check
  • From: Julia Lawall <julia.lawall@xxxxxxx>
• Re: [patch v2] PM / devfreq: exynos-nocp: Remove incorrect IS_ERR() check
  • From: Chanwoo Choi <cw00.choi@xxxxxxxxxxx>
• Re: [patch v2] PM / devfreq: exynos-nocp: Remove incorrect IS_ERR() check
  • From: Chanwoo Choi <cw00.choi@xxxxxxxxxxx>
• Re: [patch v2] PM / devfreq: exynos-nocp: Remove incorrect IS_ERR() check
  • From: Dan Carpenter <dan.carpenter@xxxxxxxxxx>
• Re: [patch v2] PM / devfreq: exynos-nocp: Remove incorrect IS_ERR() check
  • From: Chanwoo Choi <cw00.choi@xxxxxxxxxxx>
• Re: [patch v2] PM / devfreq: exynos-nocp: Remove incorrect IS_ERR() check
  • From: Dan Carpenter <dan.carpenter@xxxxxxxxxx>
• Re: [PATCH v2 0/10] Add RK3399 eDP support and fix some bugs to analogix_dp driver.
  • From: Yakir Yang <ykk@xxxxxxxxxxxxxx>
• Re: ARM: dts: exynos: Add MFC memory banks for Peach boards
  • From: "pankaj.dubey" <pankaj.dubey@xxxxxxxxxxx>
• Re: [PATCH] pinctrl: samsung: Suppress unbinding to prevent theoretical attacks
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [patch v2] PM / devfreq: exynos-nocp: Remove incorrect IS_ERR() check
  • From: Chanwoo Choi <cw00.choi@xxxxxxxxxxx>
• Re: ARM: dts: exynos: Add MFC memory banks for Peach boards
  • From: Javier Martinez Canillas <javier@xxxxxxxxxxxxxxx>
• [patch v2] PM / devfreq: exynos-nocp: Remove incorrect IS_ERR() check
  • From: Dan Carpenter <dan.carpenter@xxxxxxxxxx>
• Re: [patch] PM / devfreq: exynos-nocp: Checking for IS_ERR instead of NULL
  • From: Dan Carpenter <dan.carpenter@xxxxxxxxxx>
• Re: [PATCH] phy: exynos-mipi-video: avoid uninitialized variable use
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• Re: ARM: dts: exynos: Add MFC memory banks for Peach boards
  • From: "pankaj.dubey" <pankaj.dubey@xxxxxxxxxxx>
• Re: [PATCH] phy: exynos-mipi-video: avoid uninitialized variable use
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• Re: [PATCH] Re: Endless "supply vcc not found, using dummy regulator"
  • From: "Steinar H. Gunderson" <sgunderson@xxxxxxxxxxx>
• Re: [PATCH v4 2/7] media: s5p-mfc: use generic reserved memory bindings
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v4 2/7] media: s5p-mfc: use generic reserved memory bindings
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v4 7/7] ARM: dts: exynos4412-odroid*: enable MFC device
  • From: Javier Martinez Canillas <javier@xxxxxxxxxxxxxxx>
• Re: [PATCH v4 6/7] ARM: dts: exynos: convert MFC device to generic reserved memory bindings
  • From: Javier Martinez Canillas <javier@xxxxxxxxxxxxxxx>
• Re: [PATCH v4 3/7] media: s5p-mfc: replace custom reserved memory handling code with generic one
  • From: Javier Martinez Canillas <javier@xxxxxxxxxxxxxxx>
• Re: [PATCH v4 5/7] ARM: Exynos: remove code for MFC custom reserved memory handling
  • From: Javier Martinez Canillas <javier@xxxxxxxxxxxxxxx>
• Re: [PATCH v4 4/7] media: s5p-mfc: add iommu support
  • From: Javier Martinez Canillas <javier@xxxxxxxxxxxxxxx>
• Re: [PATCH v4 3/7] media: s5p-mfc: replace custom reserved memory handling code with generic one
  • From: Javier Martinez Canillas <javier@xxxxxxxxxxxxxxx>
• Re: [PATCH v4 2/7] media: s5p-mfc: use generic reserved memory bindings
  • From: Javier Martinez Canillas <javier@xxxxxxxxxxxxxxx>
• Re: [patch] PM / devfreq: exynos-nocp: Checking for IS_ERR instead of NULL
  • From: Julia Lawall <julia.lawall@xxxxxxx>
• Re: ARM: dts: exynos: Add MFC memory banks for Peach boards
  • From: Javier Martinez Canillas <javier@xxxxxxxxxxxxxxx>
• Re: [PATCH 2/2] ARM: dts: Add async-bridge clock to MFC power domain for Exynos5420
  • From: Javier Martinez Canillas <javier@xxxxxxxxxxxxxxx>
• Re: [PATCH 0/2] ARM: dts: Fix imprecise external abort error when accessing Exynos MFC
  • From: Javier Martinez Canillas <javier@xxxxxxxxxxxxxxx>
• Re: [PATCH 1/2] drm/exynos: g2d: Add support for old S5Pv210 type
  • From: Tobias Jakobi <tjakobi@xxxxxxxxxxxxxxxxxxxxx>
• [PATCH] drm/exynos: g2d: drop the _REG postfix from the stride defines
  • From: Tobias Jakobi <tjakobi@xxxxxxxxxxxxxxxxxxxxx>
• [PATCH] drm/exynos: remove superfluous inclusions of fbdev header
  • From: Tobias Jakobi <tjakobi@xxxxxxxxxxxxxxxxxxxxx>
• Re: [patch] PM / devfreq: exynos-nocp: Checking for IS_ERR instead of NULL
  • From: Chanwoo Choi <cw00.choi@xxxxxxxxxxx>
• [PATCH] drm/exynos: use logical AND in exynos_drm_plane_check_size()
  • From: Tobias Jakobi <tjakobi@xxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] Re: Endless "supply vcc not found, using dummy regulator"
  • From: Anand Moon <linux.amoon@xxxxxxxxx>
• Re: [PATCH 1/2] drm/exynos: g2d: Add support for old S5Pv210 type
  • From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
• Re: [PATCH v4 6/7] ARM: dts: exynos: convert MFC device to generic reserved memory bindings
  • From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
• Re: [PATCH] clk: samsung: exynos7: Don't gate CMU_{CCORE, FSYS0} blocks clock
  • From: Sylwester Nawrocki <s.nawrocki@xxxxxxxxxxx>
• Re: [PATCH 3/3] clk: samsung: exynos5433: add CPU clocks configuration data and instantiate CPU clocks
  • From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
• Re: [PATCH v6 1/2] soc: samsung: add exynos chipid driver support
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• Re: [PATCH 2/3] clk: samsung: cpu: prepare for adding Exynos5433 CPU clocks
  • From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
• Re: ARM: dts: exynos: Add MFC memory banks for Peach boards
  • From: "pankaj.dubey" <pankaj.dubey@xxxxxxxxxxx>
• Re: [PATCH 1/3] clk: samsung: exynos5433: prepare for adding CPU clocks
  • From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
• Re: [PATCH 2/2] ARM: dts: Add async-bridge clock to MFC power domain for Exynos5420
  • From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
• [PATCH v6 1/2] soc: samsung: add exynos chipid driver support
  • From: Pankaj Dubey <pankaj.dubey@xxxxxxxxxxx>
• [PATCH v6 2/2] ARM: EXYNOS: refactoring of mach-exynos to enable chipid driver
  • From: Pankaj Dubey <pankaj.dubey@xxxxxxxxxxx>
• [PATCH v6 0/2] Introducing Exynos ChipId driver
  • From: Pankaj Dubey <pankaj.dubey@xxxxxxxxxxx>
• Re: [PATCH] dwc3-exynos: Fix deferred probing storm.
  • From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
• Re: [PATCH 2/2] ARM: dts: Add async-bridge clock to MFC power domain for Exynos5420
  • From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
• Re: [PATCH 1/2] clk: exynos5420: Set ID for aclk333 gate clock
  • From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
• Re: [PATCH 0/2] ARM: dts: Fix imprecise external abort error when accessing Exynos MFC
  • From: Marek Szyprowski <m.szyprowski@xxxxxxxxxxx>
• Re: [PATCH] clk: samsung: exynos7: Don't gate CMU_{CCORE, FSYS0} blocks clock
  • From: Alim Akhtar <alim.akhtar@xxxxxxxxxxx>
• Re: [PATCH v2 05/10] drm/rockchip: analogix_dp: add rk3399 eDP support
  • From: Yakir Yang <ykk@xxxxxxxxxxxxxx>
• Re: [PATCH v2 05/10] drm/rockchip: analogix_dp: add rk3399 eDP support
  • From: Yakir Yang <ykk@xxxxxxxxxxxxxx>
• Re: [RFC PATCH] drm/exynos: fix pending update handling
  • From: Tobias Jakobi <tjakobi@xxxxxxxxxxxxxxxxxxxxx>
• [PATCH] dwc3-exynos: Fix deferred probing storm.
  • From: "Steinar H. Gunderson" <sesse@xxxxxxxxxx>
• [PATCH] Re: Endless "supply vcc not found, using dummy regulator"
  • From: "Steinar H. Gunderson" <sgunderson@xxxxxxxxxxx>
• Re: [PATCH v2 05/10] drm/rockchip: analogix_dp: add rk3399 eDP support
  • From: Heiko Stuebner <heiko@xxxxxxxxx>
• Re: [PATCH v2 05/10] drm/rockchip: analogix_dp: add rk3399 eDP support
  • From: Doug Anderson <dianders@xxxxxxxxxxxx>
• [PATCH 2/2] ARM: dts: Add async-bridge clock to MFC power domain for Exynos5420
  • From: Javier Martinez Canillas <javier@xxxxxxxxxxxxxxx>
• [PATCH 1/2] clk: exynos5420: Set ID for aclk333 gate clock
  • From: Javier Martinez Canillas <javier@xxxxxxxxxxxxxxx>
• [PATCH 0/2] ARM: dts: Fix imprecise external abort error when accessing Exynos MFC
  • From: Javier Martinez Canillas <javier@xxxxxxxxxxxxxxx>
• Re: Endless "supply vcc not found, using dummy regulator"
  • From: "Steinar H. Gunderson" <sgunderson@xxxxxxxxxxx>
• Applied "MAINTAINERS: ASoC: samsung: Add Sylwester Nawrocki and Krzysztof Kozlowski" to the asoc tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH 1/2] drm/exynos: g2d: Add support for old S5Pv210 type
  • From: Tobias Jakobi <tjakobi@xxxxxxxxxxxxxxxxxxxxx>
• Re: Endless "supply vcc not found, using dummy regulator"
  • From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
• Re: Endless "supply vcc not found, using dummy regulator"
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: Endless "supply vcc not found, using dummy regulator"
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: Endless "supply vcc not found, using dummy regulator"
  • From: "Steinar H. Gunderson" <sgunderson@xxxxxxxxxxx>
• Re: Endless "supply vcc not found, using dummy regulator"
  • From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
• Re: [PATCH v3 4/4] drm: rcar: use generic code for managing zpos plane property
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• Re: [PATCH 1/4] drm: add generic zpos property
  • From: Ville Syrjälä <ville.syrjala@xxxxxxxxxxxxxxx>
• Re: [PATCH 1/4] drm: add generic zpos property
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• Re: [PATCH 1/2] drm/exynos: g2d: Add support for old S5Pv210 type
  • From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
• Re: [PATCH 1/2] drm/exynos: g2d: Add support for old S5Pv210 type
  • From: Tobias Jakobi <tjakobi@xxxxxxxxxxxxxxxxxxxxx>
• [PATCH] MAINTAINERS: ASoC: samsung: Add Sylwester Nawrocki and Krzysztof Kozlowski
  • From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
• [PATCH v4 2/7] media: s5p-mfc: use generic reserved memory bindings
  • From: Marek Szyprowski <m.szyprowski@xxxxxxxxxxx>
• [PATCH v4 1/7] of: reserved_mem: add support for using more than one region for given device
  • From: Marek Szyprowski <m.szyprowski@xxxxxxxxxxx>
• [PATCH v4 7/7] ARM: dts: exynos4412-odroid*: enable MFC device
  • From: Marek Szyprowski <m.szyprowski@xxxxxxxxxxx>
• [PATCH v4 6/7] ARM: dts: exynos: convert MFC device to generic reserved memory bindings
  • From: Marek Szyprowski <m.szyprowski@xxxxxxxxxxx>
• [PATCH v4 5/7] ARM: Exynos: remove code for MFC custom reserved memory handling
  • From: Marek Szyprowski <m.szyprowski@xxxxxxxxxxx>
• [PATCH v4 4/7] media: s5p-mfc: add iommu support
  • From: Marek Szyprowski <m.szyprowski@xxxxxxxxxxx>
• [PATCH v4 3/7] media: s5p-mfc: replace custom reserved memory handling code with generic one
  • From: Marek Szyprowski <m.szyprowski@xxxxxxxxxxx>
• [PATCH v4 0/7] Exynos: MFC driver: reserved memory cleanup and IOMMU support
  • From: Marek Szyprowski <m.szyprowski@xxxxxxxxxxx>
• [PATCH 2/2] [media] s5p-g2d: Replace old driver with DRM version
  • From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
• [PATCH 1/2] drm/exynos: g2d: Add support for old S5Pv210 type
  • From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
• [PATCH 0/3] clk: samsung: add Exynos5433 CPU clocks
  • From: Bartlomiej Zolnierkiewicz <b.zolnierkie@xxxxxxxxxxx>
• [PATCH 3/3] clk: samsung: exynos5433: add CPU clocks configuration data and instantiate CPU clocks
  • From: Bartlomiej Zolnierkiewicz <b.zolnierkie@xxxxxxxxxxx>
• [PATCH 2/3] clk: samsung: cpu: prepare for adding Exynos5433 CPU clocks
  • From: Bartlomiej Zolnierkiewicz <b.zolnierkie@xxxxxxxxxxx>
• [PATCH 1/3] clk: samsung: exynos5433: prepare for adding CPU clocks
  • From: Bartlomiej Zolnierkiewicz <b.zolnierkie@xxxxxxxxxxx>
• Re: [PATCH v2 05/10] drm/rockchip: analogix_dp: add rk3399 eDP support
  • From: Heiko Stuebner <heiko@xxxxxxxxx>
• [PATCH v5 2/2] media: set proper max seg size for devices on Exynos SoCs
  • From: Marek Szyprowski <m.szyprowski@xxxxxxxxxxx>
• [PATCH v5 1/2] media: vb2-dma-contig: add helper for setting dma max seg size
  • From: Marek Szyprowski <m.szyprowski@xxxxxxxxxxx>
• [PATCH v5 0/2] vb2-dma-contig: configure DMA max segment size properly
  • From: Marek Szyprowski <m.szyprowski@xxxxxxxxxxx>
• [PATCH v2 05/10] drm/rockchip: analogix_dp: add rk3399 eDP support
  • From: Yakir Yang <ykk@xxxxxxxxxxxxxx>
• [PATCH v2 05/10] drm/rockchip: analogix_dp: add rk3399 eDP support
  • From: Yakir Yang <ykk@xxxxxxxxxxxxxx>
• [PATCH v2 10/10] drm/bridge: analogix_dp: fix no drm hpd event when panel plug in
  • From: Yakir Yang <ykk@xxxxxxxxxxxxxx>
• [PATCH v2 07/10] drm/bridge: analogix_dp: introduce connector mode_valid callback to plat driver
  • From: Yakir Yang <ykk@xxxxxxxxxxxxxx>
• [PATCH v2 02/10] drm/rockchip: analogix_dp: split the lcdc select setting into device data
  • From: Yakir Yang <ykk@xxxxxxxxxxxxxx>
• [PATCH v2 03/10] drm/bridge: analogix_dp: correct the register bit define error in ANALOGIX_DP_PLL_REG_1
  • From: Yakir Yang <ykk@xxxxxxxxxxxxxx>
• [PATCH v2 06/10] drm/rockchip: analogix_dp: make panel detect to an optional action
  • From: Yakir Yang <ykk@xxxxxxxxxxxxxx>
• [PATCH v2 09/10] drm/rockchip: analogix_dp: update the comments about why need to hardcode VOP output mode
  • From: Yakir Yang <ykk@xxxxxxxxxxxxxx>
• [PATCH v2 08/10] drm/rockchip: analogix_dp: correct the connector display color format and bpc
  • From: Yakir Yang <ykk@xxxxxxxxxxxxxx>
• [PATCH v2 04/10] drm/bridge: analogix_dp: some rockchip chips need to flip REF_CLK bit setting
  • From: Yakir Yang <ykk@xxxxxxxxxxxxxx>
• [PATCH v2 01/10] drm/bridge: analogix_dp: rename RK3288_DP to ROCKCHIP_DP
  • From: Yakir Yang <ykk@xxxxxxxxxxxxxx>
• [PATCH v2 0/10] Add RK3399 eDP support and fix some bugs to analogix_dp driver.
  • From: Yakir Yang <ykk@xxxxxxxxxxxxxx>
• Re: Endless "supply vcc not found, using dummy regulator"
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: Endless "supply vcc not found, using dummy regulator"
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: Endless "supply vcc not found, using dummy regulator"
  • From: "Steinar H. Gunderson" <sgunderson@xxxxxxxxxxx>
• Re: Endless "supply vcc not found, using dummy regulator"
  • From: "Steinar H. Gunderson" <sgunderson@xxxxxxxxxxx>
• Re: Endless "supply vcc not found, using dummy regulator"
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH 0015/1529] Fix typo
  • From: Randy Dunlap <rdunlap@xxxxxxxxxxxxx>
• Re: Endless "supply vcc not found, using dummy regulator"
  • From: "Steinar H. Gunderson" <sgunderson@xxxxxxxxxxx>
• Re: Endless "supply vcc not found, using dummy regulator"
  • From: "Steinar H. Gunderson" <sgunderson@xxxxxxxxxxx>
• [PATCH 4/3] iommu/exynos: Prepare for deferred probe support
  • From: Marek Szyprowski <m.szyprowski@xxxxxxxxxxx>
• [PATCH 4/5] drm/exynos: iommu: move ARM specific code to exynos_drm_iommu.h
  • From: Marek Szyprowski <m.szyprowski@xxxxxxxxxxx>
• [PATCH 5/5] drm/exynos: iommu: add support for ARM64 specific code for IOMMU glue
  • From: Marek Szyprowski <m.szyprowski@xxxxxxxxxxx>
• [PATCH 3/5] drm/exynos: iommu: remove unused entries from exynos_drm_private strcuture
  • From: Marek Szyprowski <m.szyprowski@xxxxxxxxxxx>
• [PATCH 2/5] drm/exynos: iommu: add a check if all sub-devices have iommu controller
  • From: Marek Szyprowski <m.szyprowski@xxxxxxxxxxx>
• [PATCH 1/5] drm/exynos: iommu: move dma_params configuration code to separate functions
  • From: Marek Szyprowski <m.szyprowski@xxxxxxxxxxx>
• [PATCH 0/5] Exynos DRM: add support for ARM 64bit arch with IOMMU
  • From: Marek Szyprowski <m.szyprowski@xxxxxxxxxxx>
• [PATCH 1/3] iommu/exynos: Return proper errors from getting clocks
  • From: Marek Szyprowski <m.szyprowski@xxxxxxxxxxx>
• [PATCH 3/3] iommu/exynos: Prepare clocks when needed, not in driver probe
  • From: Marek Szyprowski <m.szyprowski@xxxxxxxxxxx>
• [PATCH 0/3] Exynos IOMMU: improve clock management
  • From: Marek Szyprowski <m.szyprowski@xxxxxxxxxxx>
• [PATCH 2/3] iommu/exynos: Fix master clock management for inactive SYSMMU
  • From: Marek Szyprowski <m.szyprowski@xxxxxxxxxxx>
• Re: [PATCH 0015/1529] Fix typo
  • From: Lothar Waßmann <LW@xxxxxxxxxxxxxxxxxxx>
• Re: Endless "supply vcc not found, using dummy regulator"
  • From: "Steinar H. Gunderson" <sgunderson@xxxxxxxxxxx>
• [PATCH 0127/1529] Fix typo
  • From: Andrea Gelmini <andrea.gelmini@xxxxxxxxx>
• [PATCH 0126/1529] Fix typo
  • From: Andrea Gelmini <andrea.gelmini@xxxxxxxxx>
• [PATCH 0125/1529] Fix typo
  • From: Andrea Gelmini <andrea.gelmini@xxxxxxxxx>
• [PATCH 0124/1529] Fix typo
  • From: Andrea Gelmini <andrea.gelmini@xxxxxxxxx>
• [PATCH 0123/1529] Fix typo
  • From: Andrea Gelmini <andrea.gelmini@xxxxxxxxx>
• [PATCH 0120/1529] Fix typo
  • From: Andrea Gelmini <andrea.gelmini@xxxxxxxxx>
• [PATCH 0119/1529] Fix typo
  • From: Andrea Gelmini <andrea.gelmini@xxxxxxxxx>
• [PATCH 0118/1529] Fix typo
  • From: Andrea Gelmini <andrea.gelmini@xxxxxxxxx>
• [PATCH 0117/1529] Fix typo
  • From: Andrea Gelmini <andrea.gelmini@xxxxxxxxx>
• [PATCH 0116/1529] Fix typo
  • From: Andrea Gelmini <andrea.gelmini@xxxxxxxxx>
• [PATCH 0015/1529] Fix typo
  • From: Andrea Gelmini <andrea.gelmini@xxxxxxxxx>
• Re: [PATCH] clk: samsung: Suppress unbinding to prevent theoretical attacks
  • From: Javier Martinez Canillas <javier@xxxxxxxxxxxxxxx>
• Re: [PATCH] pinctrl: samsung: Suppress unbinding to prevent theoretical attacks
  • From: Javier Martinez Canillas <javier@xxxxxxxxxxxxxxx>
• Re: [PATCH] ARM: exynos: don't select keyboard driver
  • From: Javier Martinez Canillas <javier@xxxxxxxxxxxxxxx>
• Re: [PATCH] ARM: dts: exynos: Remove unneded always-on for regulators on Peach boards
  • From: Javier Martinez Canillas <javier@xxxxxxxxxxxxxxx>
• Re: [PATCH] iommu/exynos: Suppress unbinding to prevent system failure
  • From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
• [PATCH] iommu/exynos: Suppress unbinding to prevent system failure
  • From: Marek Szyprowski <m.szyprowski@xxxxxxxxxxx>
• Re: [PATCH] ARM: dts: exynos: Remove unneded always-on for regulators on Peach boards
  • From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
• [PATCH] ARM: dts: exynos: Remove unneded always-on for regulators on Peach boards
  • From: Javier Martinez Canillas <javier@xxxxxxxxxxxxxxx>
• Re: [PATCH 3/5] drm: mediatek: fixup drm_gem_object_lookup API change
  • From: Matthias Brugger <matthias.bgg@xxxxxxxxx>
• Re: [PATCH 2/5] drm: mediatek: add CONFIG_OF dependency
  • From: Matthias Brugger <matthias.bgg@xxxxxxxxx>
• Re: [PATCH v5 0/2] Introducing Exynos ChipId driver
  • From: Pankaj Dubey <pankaj.dubey@xxxxxxxxxxx>
• Re: [PATCH 1/5] headers_check: don't warn about c++ guards
  • From: Emil Velikov <emil.l.velikov@xxxxxxxxx>
• Re: [PATCH 5/5] drm: remove unused dev variables
  • From: Daniel Vetter <daniel@xxxxxxxx>
• [PATCH 3/5] drm: mediatek: fixup drm_gem_object_lookup API change
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• [PATCH 1/5] headers_check: don't warn about c++ guards
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• [PATCH 4/5] drm: exynos: mark pm functions as __maybe_unused
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• [PATCH 0/5] drm: fixes for merge-window regressions
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• [PATCH 5/5] drm: remove unused dev variables
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• [PATCH 2/5] drm: mediatek: add CONFIG_OF dependency
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• Re: [PATCH 0/5] drm: fixes for merge-window regressions
  • From: Daniel Vetter <daniel@xxxxxxxx>
• Re: [PATCH] ARM: exynos: don't select keyboard driver
  • From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
• Re: [PATCH] ARM: samsung: improve static dma_mask definition
  • From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
• [PATCH] ARM: exynos: don't select keyboard driver
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• [PATCH 0/5] drm: fixes for merge-window regressions
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• Re: [patch] PM / devfreq: exynos-nocp: Checking for IS_ERR instead of NULL
  • From: Chanwoo Choi <cw00.choi@xxxxxxxxxxx>
• [patch] PM / devfreq: exynos-nocp: Checking for IS_ERR instead of NULL
  • From: Dan Carpenter <dan.carpenter@xxxxxxxxxx>
• Re: [PATCH v4] media: vb2-dma-contig: configure DMA max segment size properly
  • From: Marek Szyprowski <m.szyprowski@xxxxxxxxxxx>
• [PATCH] clk: samsung: Suppress unbinding to prevent theoretical attacks
  • From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
• [PATCH] pinctrl: samsung: Suppress unbinding to prevent theoretical attacks
  • From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
• Re: [PATCH v5 0/2] Introducing Exynos ChipId driver
  • From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
• [PATCH 2/2] ARM: dts: exynos: Enable CLKOUT on Exynos5410
  • From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
• [PATCH 1/2] clk: samsung: clkout: Add support for Exynos5410
  • From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
• [PATCH v4 00/22] ARM: dts: exynos: Add initial support for Odroid XU
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• [PATCH v4 02/22] dt-bindings: clock: Add PWM and USB clock IDs to Exynos5410
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• [PATCH v4 05/22] ARM: dts: exynos: Use lowercase for Exynos5410 CPU node labels
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• [PATCH v4 08/22] ARM: dts: exynos: Move common nodes to exynos5.dtsi
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• [PATCH v4 06/22] ARM: dts: exynos: Configure Exynos5410 pinctrl for eMMC and SD card
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• [PATCH v4 07/22] ARM: dts: exynos: Split Odroid XU3 LEDs to separate DTSI
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• [PATCH v4 12/22] ARM: dts: exynos: Include common exynos5 in exynos5410.dtsi
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• [PATCH v4 09/22] ARM: dts: exynos: Prepare for inclusion of exynos5.dtsi in exynos5410.dtsi
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• [PATCH v4 10/22] ARM: dts: exynos: Use phandle to get parent node in exynos5250-snow
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• [PATCH v4 13/22] ARM: dts: exynos: Enable UART3 on Exynos5410
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• [PATCH v4 14/22] ARM: dts: exynos: MCT is not an interrupt controller and extend length of iomap
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• [PATCH v4 15/22] ARM: dts: exynos: Move common Exynos5410/542x/5800 nodes to new DTSI
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• [PATCH v4 17/22] ARM: dts: exynos: Add initial support for Odroid XU board
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• [PATCH v4 20/22] ARM: dts: exynos: Move HSI2C nodes to exynos54xx.dtsi
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• [PATCH v4 21/22] ARM: dts: exynos: Add I2C, PWM and UART pinctrl to Exynos5410
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• [PATCH v4 19/22] clk: samsung: exynos5410: Add I2C, HSI2C and RTC clocks
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• [PATCH v4 18/22] dt-bindings: clock: Add I2C, HSI2C and RTC clock IDs to Exynos5410
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• [PATCH v4 22/22] ARM: dts: exynos: Add RTC and I2C to Exynos5410
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• [PATCH v4 16/22] ARM: dts: exynos: Add USB to Exynos5410
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• [PATCH v4 04/22] ARM: dts: exynos: Re-order alphabetically Exynos5420 SD0/SD1 pinctrl nodes
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• [PATCH v4 03/22] clk: samsung: exynos5410: Add serial3, USB and PWM clocks
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• [PATCH v4 01/22] dt-bindings: clock: Add license and reformat Exynos5410 clock IDs
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• [PATCH] arm64: dts: exynos: Use human-friendly symbols for timer interrupt flags
  • From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
• Re: [PATCH v3 00/27] ARM: dts: exynos: Add initial support for Odroid XU
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH v3 00/27] ARM: dts: exynos: Add initial support for Odroid XU
  • From: Robin Murphy <robin.murphy@xxxxxxx>
• [PATCH v3 4/4] drm: rcar: use generic code for managing zpos plane property
  • From: Benjamin Gaignard <benjamin.gaignard@xxxxxxxxxx>
• [PATCH v3 3/4] drm/exynos: use generic code for managing zpos plane property
  • From: Benjamin Gaignard <benjamin.gaignard@xxxxxxxxxx>
• [PATCH v3 2/4] drm: sti: use generic zpos for plane
  • From: Benjamin Gaignard <benjamin.gaignard@xxxxxxxxxx>
• [PATCH v3 1/4] drm: add generic zpos property
  • From: Benjamin Gaignard <benjamin.gaignard@xxxxxxxxxx>
• [PATCH v3 0/4] Generic zpos property
  • From: Benjamin Gaignard <benjamin.gaignard@xxxxxxxxxx>
• Re: [PATCH 1/4] drm: add generic zpos property
  • From: Ville Syrjälä <ville.syrjala@xxxxxxxxxxxxxxx>
• Re: [PATCH 1/4] drm: add generic zpos property
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• Re: [PATCH 1/4] drm: add generic zpos property
  • From: Ville Syrjälä <ville.syrjala@xxxxxxxxxxxxxxx>
• Re: [PATCH 1/4] drm: add generic zpos property
  • From: Javier Martinez Canillas <javier@xxxxxxxxxxxx>
• Re: [PATCH 1/4] drm: add generic zpos property
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• Re: [PATCH 1/4] drm: add generic zpos property
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• Re: [PATCH 1/4] drm: add generic zpos property
  • From: Daniel Vetter <daniel@xxxxxxxx>
• Re: [PATCH 1/4] drm: add generic zpos property
  • From: Ville Syrjälä <ville.syrjala@xxxxxxxxxxxxxxx>
• [PATCH 2/4] drm: sti: use generic zpos for plane
  • From: Benjamin Gaignard <benjamin.gaignard@xxxxxxxxxx>
• [PATCH 4/4] drm: rcar: use generic code for managing zpos plane property
  • From: Benjamin Gaignard <benjamin.gaignard@xxxxxxxxxx>
• [PATCH 3/4] drm/exynos: use generic code for managing zpos plane property
  • From: Benjamin Gaignard <benjamin.gaignard@xxxxxxxxxx>
• [PATCH 1/4] drm: add generic zpos property
  • From: Benjamin Gaignard <benjamin.gaignard@xxxxxxxxxx>
• [PATCH] ARM: samsung: improve static dma_mask definition
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• Re: [PATCH] exynos: change the license to X11/MIT
  • From: Emil Velikov <emil.l.velikov@xxxxxxxxx>
• Re: [PATCH] ARM: dts: exynos: Enable AX88760 USB hub on Origen board
  • From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
• Re: [PATCH] phy: exynos-mipi-video: avoid uninitialized variable use
  • From: Krzysztof Kozlowski <k.kozlowski.k@xxxxxxxxx>
• Re: [PATCH] ARM: dts: exynos: Enable AX88760 USB hub on Origen board
  • From: Matthew Leach <matthew@xxxxxxxxxxxxx>
• Re: [PATCH v3 00/27] ARM: dts: exynos: Add initial support for Odroid XU
  • From: Krzysztof Kozlowski <k.kozlowski.k@xxxxxxxxx>
• Re: [PATCH v3 00/27] ARM: dts: exynos: Add initial support for Odroid XU
  • From: Javier Martinez Canillas <javier@xxxxxxxxxxxxxxx>
• Re: [PATCH 2/2] soc: samsung: pm_domains: Prepare for supporting ARMv8 Exynos
  • From: Javier Martinez Canillas <javier@xxxxxxxxxxxxxxx>
• Re: [PATCH 1/2] ARM: EXYNOS: Move pm_domains driver to drivers/soc/samsung
  • From: Javier Martinez Canillas <javier@xxxxxxxxxxxxxxx>
• Re: [PATCH 1/4] drm: add generic zpos property
  • From: Daniel Vetter <daniel@xxxxxxxx>
• Re: [PATCH 1/4] drm: add generic zpos property
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• Re: [PATCH v3 27/27] ARM: dts: exynos: Add RTC and I2C to Exynos5410
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH 3/4] drm/exynos: use generic code for managing zpos plane property
  • From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
• [PATCH] phy: exynos-mipi-video: avoid uninitialized variable use
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• Re: [PATCH v3 27/27] ARM: dts: exynos: Add RTC and I2C to Exynos5410
  • From: Javier Martinez Canillas <javier@xxxxxxxxxxxxxxx>
• Re: [PATCH v3 26/27] ARM: dts: exynos: Add I2C, PWM and UART pinctrl to Exynos5410
  • From: Javier Martinez Canillas <javier@xxxxxxxxxxxxxxx>
• Re: [PATCH v3 25/27] ARM: dts: exynos: Move HSI2C nodes to exynos54xx.dtsi
  • From: Javier Martinez Canillas <javier@xxxxxxxxxxxxxxx>
• [PATCH 3/4] drm/exynos: use generic code for managing zpos plane property
  • From: Benjamin Gaignard <benjamin.gaignard@xxxxxxxxxx>
• [PATCH 1/4] drm: add generic zpos property
  • From: Benjamin Gaignard <benjamin.gaignard@xxxxxxxxxx>
• Re: [PATCH v3 24/27] clk: samsung: exynos5410: Add I2C, HSI2C and RTC clocks
  • From: Javier Martinez Canillas <javier@xxxxxxxxxxxxxxx>
• Re: [PATCH v3 23/27] dt-bindings: clock: Add I2C, HSI2C and RTC clock IDs to Exynos5410
  • From: Javier Martinez Canillas <javier@xxxxxxxxxxxxxxx>
• Re: [PATCH 3/4] drm/exynos: use generic code for managing zpos plane property
  • From: Javier Martinez Canillas <javier@xxxxxxxxxxxx>
• Re: [PATCH 3/4] drm/exynos: use generic code for managing zpos plane property
  • From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
• [PATCH] clk: samsung: exynos3250: Move PLL rates data to init section
  • From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
• Re: [PATCH 3/4] drm/exynos: use generic code for managing zpos plane property
  • From: Benjamin Gaignard <benjamin.gaignard@xxxxxxxxxx>
• [PATCH 02/18] clk: samsung: exynos3250: Move platform driver and of_device_id to init section
  • From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
• [PATCH 03/18] clk: samsung: exynos3250: Constify all clock initializers
  • From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
• [PATCH 04/18] clk: samsung: exynos4: Move local function to init section
  • From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
• [PATCH 07/18] clk: samsung: exynos4415: Move PLL rates data to init section
  • From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
• [PATCH 05/18] clk: samsung: exynos4: Constify all clock initializers
  • From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
• [PATCH 08/18] clk: samsung: exynos5250: Constify all clock initializers
  • From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
• Re: [PATCH 1/4] drm: add generic zpos property
  • From: Benjamin Gaignard <benjamin.gaignard@xxxxxxxxxx>
• [PATCH 11/18] clk: samsung: exynos5420: Constify all clock initializers
  • From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
• [PATCH 14/18] clk: samsung: exynos5433: Constify all clock initializers
  • From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
• [PATCH 06/18] clk: samsung: exynos4415: Constify all clock initializers
  • From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
• [PATCH 09/18] clk: samsung: exynos5260: Constify all clock initializers
  • From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
• [PATCH 15/18] clk: samsung: exynos5433: Move PLL rates data to init section
  • From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
• [PATCH 12/18] clk: samsung: exynos5440: Constify all clock initializers
  • From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
• [PATCH 17/18] clk: samsung: exynos5250: Move sleep init function to init section
  • From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
• [PATCH 13/18] clk: samsung: exynos7: Constify all clock initializers
  • From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
• [PATCH 16/18] clk: samsung: exynos5420: Move sleep init function and PLL rates data to init section
  • From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
• [PATCH 10/18] clk: samsung: exynos5410: Constify all clock initializers
  • From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
• [PATCH 18/18] clk: samsung: Fully constify mux parent names
  • From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
• [PATCH 01/18] clk: samsung: Constify clock init data with clock arrays
  • From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
• Re: [PATCH 1/4] drm: add generic zpos property
  • From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
• Re: [PATCH 3/4] drm/exynos: use generic code for managing zpos plane property
  • From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
• Re: [PATCH 1/4] drm: add generic zpos property
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• Re: [PATCH 4/4] drm: rcar: use generic code for managing zpos plane property
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• [PATCH 2/4] drm: sti: use generic zpos for plane
  • From: Benjamin Gaignard <benjamin.gaignard@xxxxxxxxxx>
• [PATCH 4/4] drm: rcar: use generic code for managing zpos plane property
  • From: Benjamin Gaignard <benjamin.gaignard@xxxxxxxxxx>
• [PATCH 3/4] drm/exynos: use generic code for managing zpos plane property
  • From: Benjamin Gaignard <benjamin.gaignard@xxxxxxxxxx>
• [PATCH 1/4] drm: add generic zpos property
  • From: Benjamin Gaignard <benjamin.gaignard@xxxxxxxxxx>
• Re: [PATCH] ARM: dts: exynos: Only Odroid XU3-family boards use DTSI with CPU thermal nodes
  • From: Anand Moon <linux.amoon@xxxxxxxxx>
• [PATCH] ARM: dts: exynos: Enable AX88760 USB hub on Origen board
  • From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
• Re: [PATCH] ARM: dts: exynos: Only Odroid XU3-family boards use DTSI with CPU thermal nodes
  • From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
• [PATCH 1/2] ARM: exynos_defconfig: Enable MFC driver as module
  • From: Javier Martinez Canillas <javier@xxxxxxxxxxxxxxx>
• [PATCH v3 01/27] dt-bindings: clock: Add license and reformat Exynos5410 clock IDs
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• [PATCH v3 02/27] dt-bindings: clock: Add PWM and USB clock IDs to Exynos5410
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• [PATCH v3 03/27] ARM: dts: exynos: Add fin_pll node for clock driver
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• [PATCH v3 04/27] clk: samsung: exynos5410: Provide fin_pll external fixed clock
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• [PATCH v3 07/27] clk: samsung: exynos5410: Rename fin_pll from temporary to regular name
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• [PATCH v3 06/27] ARM: dts: exynos: Remove old fixed-clock provider on SMDK5410
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• [PATCH v3 08/27] clk: samsung: exynos5410: Add serial3, USB and PWM clocks
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• [PATCH v3 09/27] ARM: dts: exynos: Re-order alphabetically Exynos5420 SD0/SD1 pinctrl nodes
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• [PATCH v3 10/27] ARM: dts: exynos: Use lowercase for Exynos5410 CPU node labels
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• [PATCH v3 11/27] ARM: dts: exynos: Configure Exynos5410 pinctrl for eMMC and SD card
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• [PATCH v3 13/27] ARM: dts: exynos: Move common nodes to exynos5.dtsi
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• [PATCH v3 14/27] ARM: dts: exynos: Prepare for inclusion of exynos5.dtsi in exynos5410.dtsi
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• [PATCH v3 12/27] ARM: dts: exynos: Split Odroid XU3 LEDs to separate DTSI
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• [PATCH v3 15/27] ARM: dts: exynos: Use phandle to get parent node in exynos5250-snow
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• [PATCH v3 17/27] ARM: dts: exynos: Include common exynos5 in exynos5410.dtsi
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• [PATCH v3 19/27] ARM: dts: exynos: MCT is not an interrupt controller and extend length of iomap
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• [PATCH v3 20/27] ARM: dts: exynos: Move common Exynos5410/542x/5800 nodes to new DTSI
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• [PATCH v3 21/27] ARM: dts: exynos: Add USB to Exynos5410
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• [PATCH v3 22/27] ARM: dts: exynos: Add initial support for Odroid XU board
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• [PATCH v3 23/27] dt-bindings: clock: Add I2C, HSI2C and RTC clock IDs to Exynos5410
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• [PATCH v3 24/27] clk: samsung: exynos5410: Add I2C, HSI2C and RTC clocks
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• [PATCH v3 25/27] ARM: dts: exynos: Move HSI2C nodes to exynos54xx.dtsi
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• [PATCH v3 26/27] ARM: dts: exynos: Add I2C, PWM and UART pinctrl to Exynos5410
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• [PATCH v3 27/27] ARM: dts: exynos: Add RTC and I2C to Exynos5410
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• [PATCH v3 18/27] ARM: dts: exynos: Enable UART3 on Exynos5410
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• [PATCH v3 05/27] ARM: dts: exynos: Switch MCT node to a new fin_pll clock
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• [PATCH v3 00/27] ARM: dts: exynos: Add initial support for Odroid XU
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH] ARM: dts: exynos: Only Odroid XU3-family boards use DTSI with CPU thermal nodes
  • From: Anand Moon <linux.amoon@xxxxxxxxx>
• [PATCH] ARM: dts: exynos: Replace deprecated hsi2c compatible on Exynos5420
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• [PATCH] soc: samsung: pm_domains: Enable COMPILE_TEST for build coverage
  • From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
• Re: [GIT PULL] ARM: dts: exynos: Devfreq for v4.7
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• Re: [PATCH] ARM: dts: exynos: Only Odroid XU3-family boards use DTSI with CPU thermal nodes
  • From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
• Re: [PATCH] ARM: dts: exynos: Only Odroid XU3-family boards use DTSI with CPU thermal nodes
  • From: Anand Moon <linux.amoon@xxxxxxxxx>
• Re: [PATCH v2 00/22] ARM: dts: exynos: Add initial support for Odroid XU
  • From: Javier Martinez Canillas <javier@xxxxxxxxxxxxxxx>
• [PATCH 2/2] soc: samsung: pm_domains: Prepare for supporting ARMv8 Exynos
  • From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
• [PATCH 1/2] ARM: EXYNOS: Move pm_domains driver to drivers/soc/samsung
  • From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
• Re: [PATCH] exynos: change the license to X11/MIT
  • From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
• Re: [PATCH v2 20/22] ARM: dts: exynos: Move common Exynos5410/542x/5800 nodes to new DTSI
  • From: Javier Martinez Canillas <javier@xxxxxxxxxxxxxxx>
• Re: [PATCH] ARM: dts: exynos: Only Odroid XU3-family boards use DTSI with CPU thermal nodes
  • From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
• Re: [PATCH] exynos: change the license to X11/MIT
  • From: Tobias Jakobi <tjakobi@xxxxxxxxxxxxxxxxxxxxx>
• Re: [RFC v2 00/13] usb/mmc/power: Fix USB/LAN when TFTP booting
  • From: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
• Re: [PATCH] ARM: dts: exynos: Only Odroid XU3-family boards use DTSI with CPU thermal nodes
  • From: Anand Moon <linux.amoon@xxxxxxxxx>
• Re: [PATCH] ARM: dts: exynos: Only Odroid XU3-family boards use DTSI with CPU thermal nodes
  • From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
• [PATCH] exynos: change the license to X11/MIT
  • From: Inki Dae <inki.dae@xxxxxxxxxxx>
• Re: [PATCH] ARM: dts: exynos: Only Odroid XU3-family boards use DTSI with CPU thermal nodes
  • From: Anand Moon <linux.amoon@xxxxxxxxx>
• Re: [PATCH v2 22/22] ARM: dts: exynos: Add initial support for Odroid XU board
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH v2 20/22] ARM: dts: exynos: Move common Exynos5410/542x/5800 nodes to new DTSI
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH v2 13/22] ARM: dts: exynos: Move common nodes to exynos5.dtsi
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH v2 06/22] ARM: dts: exynos: Remove old fixed-clock provider on SMDK5410
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH v2 04/22] clk: samsung: exynos5410: Provide fin_pll external fixed clock
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH v2 00/22] ARM: dts: exynos: Add initial support for Odroid XU
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH v6 7/9] extcon: max8997: Fix inconsistent indenting
  • From: Chanwoo Choi <cw00.choi@xxxxxxxxxxx>
• Re: [PATCH v6 5/9] extcon: max8997: Fix handling error code of regmap_irq_get_virq()
  • From: Chanwoo Choi <cw00.choi@xxxxxxxxxxx>
• Re: [PATCH v2 22/22] ARM: dts: exynos: Add initial support for Odroid XU board
  • From: Javier Martinez Canillas <javier@xxxxxxxxxxxxxxx>
• Re: [PATCH v2 00/22] ARM: dts: exynos: Add initial support for Odroid XU
  • From: Javier Martinez Canillas <javier@xxxxxxxxxxxxxxx>
• Re: [PATCH v2 00/22] ARM: dts: exynos: Add initial support for Odroid XU
  • From: Stephen Boyd <sboyd@xxxxxxxxxxxxxx>
• Re: [PATCH v2 21/22] ARM: dts: exynos: Add USB to Exynos5410
  • From: Javier Martinez Canillas <javier@xxxxxxxxxxxxxxx>
• Re: [PATCH v2 20/22] ARM: dts: exynos: Move common Exynos5410/542x/5800 nodes to new DTSI
  • From: Javier Martinez Canillas <javier@xxxxxxxxxxxxxxx>
• Re: [PATCH v2 19/22] ARM: dts: exynos: MCT is not an interrupt controller and extend length of iomap
  • From: Javier Martinez Canillas <javier@xxxxxxxxxxxxxxx>
• Re: [PATCH v2 18/22] ARM: dts: exynos: Enable UART3 on Exynos5410
  • From: Javier Martinez Canillas <javier@xxxxxxxxxxxxxxx>
• Re: [PATCH v2 17/22] ARM: dts: exynos: Include common exynos5 in exynos5410.dtsi
  • From: Javier Martinez Canillas <javier@xxxxxxxxxxxxxxx>
• Re: [PATCH v2 16/22] ARM: dts: exynos: Move Exynos5250 and Exynos5420 nodes under soc
  • From: Javier Martinez Canillas <javier@xxxxxxxxxxxxxxx>
• Re: [PATCH v2 15/22] ARM: dts: exynos: Use phandle to get parent node in exynos5250-snow
  • From: Javier Martinez Canillas <javier@xxxxxxxxxxxxxxx>
• Re: [PATCH v2 14/22] ARM: dts: exynos: Prepare for inclusion of exynos5.dtsi in exynos5410.dtsi
  • From: Javier Martinez Canillas <javier@xxxxxxxxxxxxxxx>
• Re: [PATCH v2 13/22] ARM: dts: exynos: Move common nodes to exynos5.dtsi
  • From: Javier Martinez Canillas <javier@xxxxxxxxxxxxxxx>
• Re: [PATCH v2 12/22] ARM: dts: exynos: Split Odroid XU3 LEDs to separate DTSI
  • From: Javier Martinez Canillas <javier@xxxxxxxxxxxxxxx>
• Re: [PATCH v2 11/22] ARM: dts: exynos: Configure Exynos5410 pinctrl for eMMC and SD card
  • From: Javier Martinez Canillas <javier@xxxxxxxxxxxxxxx>
• Re: [PATCH v2 08/22] clk: samsung: exynos5410: Add serial3, USB and PWM clocks
  • From: Javier Martinez Canillas <javier@xxxxxxxxxxxxxxx>
• Re: [PATCH v2 10/22] ARM: dts: exynos: Use lowercase for Exynos5410 CPU node labels
  • From: Javier Martinez Canillas <javier@xxxxxxxxxxxxxxx>
• Re: [PATCH v2 09/22] ARM: dts: exynos: Re-order alphabetically Exynos5420 SD0/SD1 pinctrl nodes
  • From: Javier Martinez Canillas <javier@xxxxxxxxxxxxxxx>
• Re: [PATCH v2 07/22] clk: samsung: exynos5410: Rename fin_pll from temporary to regular name
  • From: Javier Martinez Canillas <javier@xxxxxxxxxxxxxxx>
• Re: [PATCH v2 06/22] ARM: dts: exynos: Remove old fixed-clock provider on SMDK5410
  • From: Javier Martinez Canillas <javier@xxxxxxxxxxxxxxx>
• Re: [PATCH v2 05/22] ARM: dts: exynos: Switch MCT node to a new fin_pll clock
  • From: Javier Martinez Canillas <javier@xxxxxxxxxxxxxxx>
• Re: [PATCH v2 04/22] clk: samsung: exynos5410: Provide fin_pll external fixed clock
  • From: Javier Martinez Canillas <javier@xxxxxxxxxxxxxxx>
• Re: [PATCH v2 22/22] ARM: dts: exynos: Add initial support for Odroid XU board
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v2 03/22] ARM: dts: exynos: Add fin_pll node for clock driver
  • From: Javier Martinez Canillas <javier@xxxxxxxxxxxxxxx>
• Re: [PATCH v2 02/22] dt-bindings: clock: Add PWM and USB clock IDs to Exynos5410
  • From: Javier Martinez Canillas <javier@xxxxxxxxxxxxxxx>
• Re: [PATCH v2 01/22] dt-bindings: clock: Add license and reformat Exynos5410 clock IDs
  • From: Javier Martinez Canillas <javier@xxxxxxxxxxxxxxx>
• Re: [RFC v2 00/13] usb/mmc/power: Fix USB/LAN when TFTP booting
  • From: Rob Herring <robh@xxxxxxxxxx>
• [PATCH v2] clk: samsung: Remove useless check for return value of samsung_clk_init
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH] clk: samsung: exynos5420: Remove useless check for return value of samsung_clk_init
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH] ARM: dts: exynos: Only Odroid XU3-family boards use DTSI with CPU thermal nodes
  • From: Javier Martinez Canillas <javier@xxxxxxxxxxxxxxx>
• Re: [PATCH v6 1/9] input: max8997-haptic: Fix NULL pointer dereference
  • From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
• Re: [GIT PULL] ARM: dts: exynos: Non-critical fixes for v4.7
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• Re: drm/exynos: fimd: pagefault when restarting X
  • From: Inki Dae <daeinki@xxxxxxxxx>
• Re: [PATCH] clk: samsung: exynos5420: Remove useless check for return value of samsung_clk_init
  • From: Javier Martinez Canillas <javier@xxxxxxxxxxxxxxx>
• Re: [PATCH 3/6] drm/exynos/hdmi: expose HDMI-PHY clock as pipeline clock
  • From: Inki Dae <daeinki@xxxxxxxxx>
• Re: [PATCH v5 1/5] drm: add generic zpos property
  • From: Tobias Jakobi <tjakobi@xxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v4] media: vb2-dma-contig: configure DMA max segment size properly
  • From: Mauro Carvalho Chehab <mchehab@xxxxxxxxxxxxxxx>
• Re: [PATCH v5 1/5] drm: add generic zpos property
  • From: Daniel Vetter <daniel@xxxxxxxx>
• Re: [PATCH v5 1/5] drm: add generic zpos property
  • From: Benjamin Gaignard <benjamin.gaignard@xxxxxxxxxx>
• Re: [RFC PATCH] drm/exynos: fix pending update handling
  • From: Andrzej Hajda <a.hajda@xxxxxxxxxxx>
• Re: [RFC v2 00/13] usb/mmc/power: Fix USB/LAN when TFTP booting
  • From: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
• Re: [PATCH v6 0/9] mfd: max8997: Add regmap support
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• [PATCH] ARM: dts: exynos: Only Odroid XU3-family boards use DTSI with CPU thermal nodes
  • From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
• Re: [PATCH v4] media: vb2-dma-contig: configure DMA max segment size properly
  • From: Marek Szyprowski <m.szyprowski@xxxxxxxxxxx>
• [PATCH v2 02/22] dt-bindings: clock: Add PWM and USB clock IDs to Exynos5410
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• [PATCH v2 04/22] clk: samsung: exynos5410: Provide fin_pll external fixed clock
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• [PATCH v2 03/22] ARM: dts: exynos: Add fin_pll node for clock driver
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• [PATCH v2 05/22] ARM: dts: exynos: Switch MCT node to a new fin_pll clock
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• [PATCH v2 06/22] ARM: dts: exynos: Remove old fixed-clock provider on SMDK5410
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• [PATCH v2 07/22] clk: samsung: exynos5410: Rename fin_pll from temporary to regular name
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• [PATCH v2 08/22] clk: samsung: exynos5410: Add serial3, USB and PWM clocks
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• [PATCH v2 09/22] ARM: dts: exynos: Re-order alphabetically Exynos5420 SD0/SD1 pinctrl nodes
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• [PATCH v2 11/22] ARM: dts: exynos: Configure Exynos5410 pinctrl for eMMC and SD card
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• [PATCH v2 10/22] ARM: dts: exynos: Use lowercase for Exynos5410 CPU node labels
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• [PATCH v2 12/22] ARM: dts: exynos: Split Odroid XU3 LEDs to separate DTSI
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• [PATCH v2 13/22] ARM: dts: exynos: Move common nodes to exynos5.dtsi
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• [PATCH v2 14/22] ARM: dts: exynos: Prepare for inclusion of exynos5.dtsi in exynos5410.dtsi
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• [PATCH v2 15/22] ARM: dts: exynos: Use phandle to get parent node in exynos5250-snow
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• [PATCH v2 17/22] ARM: dts: exynos: Include common exynos5 in exynos5410.dtsi
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• [PATCH v2 19/22] ARM: dts: exynos: MCT is not an interrupt controller and extend length of iomap
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• [PATCH v2 20/22] ARM: dts: exynos: Move common Exynos5410/542x/5800 nodes to new DTSI
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• [PATCH v2 21/22] ARM: dts: exynos: Add USB to Exynos5410
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• [PATCH v2 22/22] ARM: dts: exynos: Add initial support for Odroid XU board
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• [PATCH v2 18/22] ARM: dts: exynos: Enable UART3 on Exynos5410
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• [PATCH v2 01/22] dt-bindings: clock: Add license and reformat Exynos5410 clock IDs
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• [PATCH v2 00/22] ARM: dts: exynos: Add initial support for Odroid XU
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• [PATCH] clk: samsung: exynos5420: Remove useless check for return value of samsung_clk_init
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• [GIT PULL] ARM: dts: exynos: Non-critical fixes for v4.7
  • From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
• Re: [RFC PATCH] drm/exynos: fix pending update handling
  • From: Tobias Jakobi <tjakobi@xxxxxxxxxxxxxxxxxxxxx>
• Re: [RFC PATCH 05/12] ARM: dts: exynos: Configure Exynos5410 pinctrl for eMMC and SD card
  • From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
• Re: [PATCH v6 6/9] rtc: max8997: Check for ERRNO of regmap_irq_get_virq()
  • From: Alexandre Belloni <alexandre.belloni@xxxxxxxxxxxxxxxxxx>
• Re: [RFC PATCH 05/12] ARM: dts: exynos: Configure Exynos5410 pinctrl for eMMC and SD card
  • From: Alim Akhtar <alim.akhtar@xxxxxxxxx>
• Re: [PATCH v4] media: vb2-dma-contig: configure DMA max segment size properly
  • From: Mauro Carvalho Chehab <mchehab@xxxxxxxxxxxxxxx>
• Re: [PATCH] ARM: dts: exynos: Add MFC memory banks for Peach boards
  • From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
• Re: [PATCH] ARM: dts: exynos: Add MFC memory banks for Peach boards
  • From: Javier Martinez Canillas <javier@xxxxxxxxxxxxxxx>
• Re: [PATCH] ARM: dts: exynos: Add MFC memory banks for Peach boards
  • From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
• Re: [PATCH] ARM: dts: exynos: Add MFC memory banks for Peach boards
  • From: Javier Martinez Canillas <javier@xxxxxxxxxxxxxxx>
• Re: [RFC v2 00/13] usb/mmc/power: Fix USB/LAN when TFTP booting
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: drm/exynos: fimd: pagefault when restarting X
  • From: Andrzej Hajda <a.hajda@xxxxxxxxxxx>
• Re: [PATCH v6 2/9] mfd: max8997: Use regmap to access registers
  • From: Jacek Anaszewski <j.anaszewski@xxxxxxxxxxx>
• [RFC PATCH] drm/exynos: fix pending update handling
  • From: Andrzej Hajda <a.hajda@xxxxxxxxxxx>
• Re: drm/exynos: fimd: pagefault when restarting X
  • From: Tobias Jakobi <tjakobi@xxxxxxxxxxxxxxxxxxxxx>
• [PATCH v6 7/9] extcon: max8997: Fix inconsistent indenting
  • From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
• [PATCH v6 4/9] mfd: max8997: Change irq names to upper case
  • From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
• [PATCH v6 9/9] ARM: dts: exynos: Add interrupt line to MAX8997 PMIC on exynos4210-trats
  • From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
• [PATCH v6 6/9] rtc: max8997: Check for ERRNO of regmap_irq_get_virq()
  • From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
• [PATCH v6 2/9] mfd: max8997: Use regmap to access registers
  • From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
• [PATCH v6 8/9] ARM: dts: exynos: Fix regulator name to avoid forbidden character on exynos4210-trats
  • From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
• [PATCH v6 3/9] mfd: max8997: handle IRQs using regmap
  • From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
• [PATCH v6 5/9] extcon: max8997: Fix handling error code of regmap_irq_get_virq()
  • From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
• [PATCH v6 1/9] input: max8997-haptic: Fix NULL pointer dereference
  • From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
• Re: [RFC v2 00/13] usb/mmc/power: Fix USB/LAN when TFTP booting
  • From: Peter Chen <hzpeterchen@xxxxxxxxx>
• [PATCH v6 1/9] input: max8997-haptic: Fix NULL pointer dereference
  • From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
• [PATCH v6 0/9] mfd: max8997: Add regmap support
  • From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
• Re: drm/exynos: fimd: pagefault when restarting X
  • From: Andrzej Hajda <a.hajda@xxxxxxxxxxx>
• Re: [RFC v2 13/13] ARM: dts: exynos: Fix LAN and HUB after bootloader initialization on Odroid U3
  • From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
• Re: [RFC v2 11/13] usb: port: Parse pwrseq phandle from Device Tree
  • From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
• Re: [RFC v2 09/13] power: pwrseq: Add support for USB hubs with external power
  • From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
• Re: [RFC v2 07/13] power: pwrseq: simple: Add support for toggling regulator
  • From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
• Re: [RFC v2 05/13] power: pwrseq: Remove mmc prefix from mmc_pwrseq
  • From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
• Re: [RFC v2 02/13] power/mmc: Move pwrseq drivers to power/pwrseq
  • From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
• Re: [RFC v2 01/13] usb: misc: usb3503: Clean up on driver unbind
  • From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
• Re: [RFC v2 00/13] usb/mmc/power: Fix USB/LAN when TFTP booting
  • From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
• Re: [RFC v2 00/13] usb/mmc/power: Fix USB/LAN when TFTP booting
  • From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
• Re: [RFC v2 00/13] usb/mmc/power: Fix USB/LAN when TFTP booting
  • From: Peter Chen <hzpeterchen@xxxxxxxxx>
• Re: [PATCH] drm/exynos: fimd: harden fimd_calc_clkdiv()
  • From: Andrzej Hajda <a.hajda@xxxxxxxxxxx>
• Re: [RFC v2 00/13] usb/mmc/power: Fix USB/LAN when TFTP booting
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [RFC v2 13/13] ARM: dts: exynos: Fix LAN and HUB after bootloader initialization on Odroid U3
  • From: Javier Martinez Canillas <javier@xxxxxxxxxxxxxxx>
• Re: [RFC v2 12/13] ARM: dts: exynos: Switch the buck8 to GPIO mode on Odroid U3
  • From: Javier Martinez Canillas <javier@xxxxxxxxxxxxxxx>
• Re: [RFC v2 11/13] usb: port: Parse pwrseq phandle from Device Tree
  • From: Javier Martinez Canillas <javier@xxxxxxxxxxxxxxx>
• Re: [RFC v2 10/13] usb: hub: Power sequence the ports on activation
  • From: Javier Martinez Canillas <javier@xxxxxxxxxxxxxxx>
• Re: [RFC v2 09/13] power: pwrseq: Add support for USB hubs with external power
  • From: Javier Martinez Canillas <javier@xxxxxxxxxxxxxxx>
• Re: [RFC v2 08/13] usb: hub: Handle deferred probe
  • From: Javier Martinez Canillas <javier@xxxxxxxxxxxxxxx>
• Re: [RFC v2 07/13] power: pwrseq: simple: Add support for toggling regulator
  • From: Javier Martinez Canillas <javier@xxxxxxxxxxxxxxx>
• Re: [RFC v2 06/13] power: pwrseq: Generalize mmc_pwrseq operations by removing mmc prefix
  • From: Javier Martinez Canillas <javier@xxxxxxxxxxxxxxx>
• Re: [RFC v2 05/13] power: pwrseq: Remove mmc prefix from mmc_pwrseq
  • From: Javier Martinez Canillas <javier@xxxxxxxxxxxxxxx>
• Re: [RFC v2 04/13] power: pwrseq: Enable COMPILE_TEST for drivers
  • From: Javier Martinez Canillas <javier@xxxxxxxxxxxxxxx>
• Re: [RFC v2 03/13] MAINTAINERS: Retain Ulf Hansson as the same maintainer of pwrseq
  • From: Javier Martinez Canillas <javier@xxxxxxxxxxxxxxx>
• Re: [RFC v2 02/13] power/mmc: Move pwrseq drivers to power/pwrseq
  • From: Javier Martinez Canillas <javier@xxxxxxxxxxxxxxx>
• Re: [RFC v2 01/13] usb: misc: usb3503: Clean up on driver unbind
  • From: Javier Martinez Canillas <javier@xxxxxxxxxxxxxxx>
• Re: [RFC v2 10/13] usb: hub: Power sequence the ports on activation
  • From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
• drm/exynos: fimd: pagefault when restarting X
  • From: Tobias Jakobi <tjakobi@xxxxxxxxxxxxxxxxxxxxx>
• [PATCH] drm/exynos: fimd: harden fimd_calc_clkdiv()
  • From: Tobias Jakobi <tjakobi@xxxxxxxxxxxxxxxxxxxxx>
• Re: drm/exynos: fimd: vrefresh is zero
  • From: Tobias Jakobi <tjakobi@xxxxxxxxxxxxxxxxxxxxx>
• Re: [RFC v2 10/13] usb: hub: Power sequence the ports on activation
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• [RFC v2 02/13] power/mmc: Move pwrseq drivers to power/pwrseq
  • From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
• [RFC v2 00/13] usb/mmc/power: Fix USB/LAN when TFTP booting
  • From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
• [RFC v2 03/13] MAINTAINERS: Retain Ulf Hansson as the same maintainer of pwrseq
  • From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
• [RFC v2 01/13] usb: misc: usb3503: Clean up on driver unbind
  • From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
• [RFC v2 04/13] power: pwrseq: Enable COMPILE_TEST for drivers
  • From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
• [RFC v2 05/13] power: pwrseq: Remove mmc prefix from mmc_pwrseq
  • From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
• [RFC v2 09/13] power: pwrseq: Add support for USB hubs with external power
  • From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
• [RFC v2 07/13] power: pwrseq: simple: Add support for toggling regulator
  • From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
• [RFC v2 06/13] power: pwrseq: Generalize mmc_pwrseq operations by removing mmc prefix
  • From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
• [RFC v2 08/13] usb: hub: Handle deferred probe
  • From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
• [RFC v2 12/13] ARM: dts: exynos: Switch the buck8 to GPIO mode on Odroid U3
  • From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
• [RFC v2 11/13] usb: port: Parse pwrseq phandle from Device Tree
  • From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
• [RFC v2 10/13] usb: hub: Power sequence the ports on activation
  • From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
• [RFC v2 13/13] ARM: dts: exynos: Fix LAN and HUB after bootloader initialization on Odroid U3
  • From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
• Re: drm/exynos: fimd: vrefresh is zero
  • From: Andrzej Hajda <a.hajda@xxxxxxxxxxx>
• Re: drm/exynos: fimd: vrefresh is zero
  • From: Andrzej Hajda <a.hajda@xxxxxxxxxxx>
• Re: [RFT PATCH 1/3] usb: misc: usb3503: Fix HUB mode after bootloader initialization
  • From: Mark Brown <broonie@xxxxxxxxxx>
• [PATCH v2] drm/exynos: fix cancel page flip code
  • From: Andrzej Hajda <a.hajda@xxxxxxxxxxx>
• Re: [PATCH v3 3/3] ARM: dts: exynos: Lower SD card interface voltage to 2.8 V on Odroid X/X2/U3
  • From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
• [GIT PULL] ARM: dts: exynos: Devfreq for v4.7
  • From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
• Re: [PATCH v3 3/3] ARM: dts: exynos: Lower SD card interface voltage to 2.8 V on Odroid X/X2/U3
  • From: Javier Martinez Canillas <javier@xxxxxxxxxxxxxxx>
• [PATCH v3 2/3] ARM: dts: exynos: Define vqmmc for eMMC card on Odroid X/X2/U3
  • From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
• [PATCH v3 3/3] ARM: dts: exynos: Lower SD card interface voltage to 2.8 V on Odroid X/X2/U3
  • From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
• [PATCH v3 1/3] ARM: dts: exynos: Define vqmmc for SD card and allow disabling regulators on Odroid X/X2/U3
  • From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
• Re: [RFT PATCH 1/3] usb: misc: usb3503: Fix HUB mode after bootloader initialization
  • From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
• Re: [PATCH] drm/exynos: fix cancel page flip code
  • From: Daniel Stone <daniel@xxxxxxxxxxxxx>
• Re: [PATCH] drm/exynos: fix cancel page flip code
  • From: Andrzej Hajda <a.hajda@xxxxxxxxxxx>
• Re: [PATCH 3/6] drm/exynos/hdmi: expose HDMI-PHY clock as pipeline clock
  • From: Andrzej Hajda <a.hajda@xxxxxxxxxxx>
• [PATCH v4] media: vb2-dma-contig: configure DMA max segment size properly
  • From: Marek Szyprowski <m.szyprowski@xxxxxxxxxxx>
• Re: [PATCH v3] media: vb2-dma-contig: configure DMA max segment size properly
  • From: Marek Szyprowski <m.szyprowski@xxxxxxxxxxx>
• Re: [PATCH v3] media: vb2-dma-contig: configure DMA max segment size properly
  • From: Hans Verkuil <hverkuil@xxxxxxxxx>
• Re: [PATCH v3] media: vb2-dma-contig: configure DMA max segment size properly
  • From: Marek Szyprowski <m.szyprowski@xxxxxxxxxxx>
• Re: [PATCH v3] media: vb2-dma-contig: configure DMA max segment size properly
  • From: Hans Verkuil <hverkuil@xxxxxxxxx>
• Re: [RFT PATCH 1/3] usb: misc: usb3503: Fix HUB mode after bootloader initialization
  • From: Rob Herring <robh@xxxxxxxxxx>
• [RFC PATCH 01/12] dt-bindings: clock: Add license and reformat Exynos5410 clock IDs
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• [RFC PATCH 02/12] dt-bindings: clock: Add PWM clock ID to Exynos5410
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• [RFC PATCH 03/12] ARM: dts: exynos: Re-order alphabetically Exynos5420 SD0/SD1 pinctrl nodes
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• [RFC PATCH 04/12] ARM: dts: exynos: Use lowercase for Exynos5410 CPU node labels
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• [RFC PATCH 05/12] ARM: dts: exynos: Configure Exynos5410 pinctrl for eMMC and SD card
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• [RFC PATCH 06/12] ARM: dts: exynos: Split Odroid XU3 LEDs to separate DTSI
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• [RFC PATCH 07/12] ARM: dts: exynos: Move common nodes to exynos5.dtsi
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• [RFC PATCH 08/12] ARM: dts: exynos: Prepare for inclusion of exynos5.dtsi in exynos5410.dtsi
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• [RFC PATCH 12/12] ARM: dts: exynos: Enable UART3 on Exynos5410
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• [RFC PATCH 11/12] ARM: dts: exynos: Include common exynos5 in exynos5410.dtsi
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• [RFC PATCH 09/12] ARM: dts: exynos: Use phandle to get parent node in exynos5250-snow
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• [RFC PATCH 00/12] ARM: dts: exynos: Reorganize before adding Odroid XU board
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH v2 0/8] PM / devfreq: Add NoCP devfreq-event and support busfreq on exyno5422-odroidxu3
  • From: Chanwoo Choi <cw00.choi@xxxxxxxxxxx>
• Re: [PATCH v2 0/8] PM / devfreq: Add NoCP devfreq-event and support busfreq on exyno5422-odroidxu3
  • From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
• Re: [PATCH v9 00/20] PM / devferq: Add generic exynos bus frequency driver and new passive governor
  • From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
• Re: Watchdog reset trigger for eMMC
  • From: Anand Moon <linux.amoon@xxxxxxxxx>
• Re: Fwd: [PATCH v2 0/8] PM / devfreq: Add NoCP devfreq-event and support busfreq on exyno5422-odroidxu3
  • From: Chanwoo Choi <cw00.choi@xxxxxxxxxxx>
• Re: drm/exynos: fimd: vrefresh is zero
  • From: Daniel Vetter <daniel@xxxxxxxx>
• Re: drm/exynos: fimd: vrefresh is zero
  • From: Tobias Jakobi <tjakobi@xxxxxxxxxxxxxxxxxxxxx>
• Re: drm/exynos: fimd: vrefresh is zero
  • From: Daniel Vetter <daniel@xxxxxxxx>
• Re: drm/exynos: fimd: vrefresh is zero
  • From: Tobias Jakobi <tjakobi@xxxxxxxxxxxxxxxxxxxxx>
• Re: drm/exynos: fimd: vrefresh is zero
  • From: Alex Deucher <alexdeucher@xxxxxxxxx>
• Re: [RFT PATCH 0/3] usb: misc: usb3503: Fix missing device when TFTP booting
  • From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
• Re: [RFT PATCH 0/3] usb: misc: usb3503: Fix missing device when TFTP booting
  • From: Hans Verkuil <hverkuil@xxxxxxxxx>
• Re: [PATCH 2/2] media: s3c-camif: fix deadlock on driver probe()
  • From: Hans Verkuil <hverkuil@xxxxxxxxx>
• Re: [PATCH v3] media: vb2-dma-contig: configure DMA max segment size properly
  • From: Hans Verkuil <hverkuil@xxxxxxxxx>
• Re: [PATCH v3] media: vb2-dma-contig: configure DMA max segment size properly
  • From: Sakari Ailus <sakari.ailus@xxxxxx>
• Re: [PATCH v3] serial: samsung: Reorder the sequence of clock control when call s3c24xx_serial_set_termios()
  • From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
• Re: [PATCH 1/2] media: exynos4-is: fix deadlock on driver probe
  • From: Hans Verkuil <hverkuil@xxxxxxxxx>
• [PATCH v3] media: vb2-dma-contig: configure DMA max segment size properly
  • From: Marek Szyprowski <m.szyprowski@xxxxxxxxxxx>
• Re: [RFT PATCH 1/3] usb: misc: usb3503: Fix HUB mode after bootloader initialization
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH 1/2] media: exynos4-is: fix deadlock on driver probe
  • From: Mauro Carvalho Chehab <mchehab@xxxxxxxxxxxxxxx>
• Re: [RFT PATCH 1/3] usb: misc: usb3503: Fix HUB mode after bootloader initialization
  • From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
• Re: [RFT PATCH 1/3] usb: misc: usb3503: Fix HUB mode after bootloader initialization
  • From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
• Re: [PATCH v2] media: vb2-dma-contig: configure DMA max segment size properly
  • From: Hans Verkuil <hverkuil@xxxxxxxxx>
• Re: Watchdog reset trigger for eMMC
  • From: Marek Szyprowski <m.szyprowski@xxxxxxxxxxx>
• Re: Fwd: [PATCH v2 0/8] PM / devfreq: Add NoCP devfreq-event and support busfreq on exyno5422-odroidxu3
  • From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
• Re: Fwd: [PATCH v2 0/8] PM / devfreq: Add NoCP devfreq-event and support busfreq on exyno5422-odroidxu3
  • From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
• Re: Fwd: [PATCH v2 0/8] PM / devfreq: Add NoCP devfreq-event and support busfreq on exyno5422-odroidxu3
  • From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
• Re: [RFT PATCH 0/3] usb: misc: usb3503: Fix missing device when TFTP booting
  • From: Marek Szyprowski <m.szyprowski@xxxxxxxxxxx>
• Fwd: [PATCH v2 0/8] PM / devfreq: Add NoCP devfreq-event and support busfreq on exyno5422-odroidxu3
  • From: MyungJoo Ham <myungjoo.ham@xxxxxxxxxxx>
• Re: [PATCH 1/2] media: exynos4-is: fix deadlock on driver probe
  • From: Hans Verkuil <hverkuil@xxxxxxxxx>
• Re: [PATCH 1/2] media: exynos4-is: fix deadlock on driver probe
  • From: Sakari Ailus <sakari.ailus@xxxxxxxxxxxxxxx>
• Re: [RFT PATCH 0/3] usb: misc: usb3503: Fix missing device when TFTP booting
  • From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
• Re: [RFT PATCH 0/3] usb: misc: usb3503: Fix missing device when TFTP booting
  • From: Hans Verkuil <hverkuil@xxxxxxxxx>
• Re: [RFT PATCH 0/3] usb: misc: usb3503: Fix missing device when TFTP booting
  • From: Hans Verkuil <hverkuil@xxxxxxxxx>
• Re: [RFT PATCH 0/3] usb: misc: usb3503: Fix missing device when TFTP booting
  • From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
• drm/exynos: fimd: vrefresh is zero
  • From: Tobias Jakobi <tjakobi@xxxxxxxxxxxxxxxxxxxxx>
• Re: [RFT PATCH 0/3] usb: misc: usb3503: Fix missing device when TFTP booting
  • From: Hans Verkuil <hverkuil@xxxxxxxxx>
• Watchdog reset trigger for eMMC
  • From: Anand Moon <linux.amoon@xxxxxxxxx>
• Re: [RFT PATCH 1/3] usb: misc: usb3503: Fix HUB mode after bootloader initialization
  • From: Mark Brown <broonie@xxxxxxxxxx>
• [PATCHv16 13/13] vivid: add CEC emulation
  • From: Hans Verkuil <hverkuil@xxxxxxxxx>
• Re: [PATCH v2] media: vb2-dma-contig: configure DMA max segment size properly
  • From: Sakari Ailus <sakari.ailus@xxxxxx>
• [PATCHv16 07/13] cec.txt: add CEC framework documentation
  • From: Hans Verkuil <hverkuil@xxxxxxxxx>
• [PATCHv16 09/13] cec: adv7604: add cec support.
  • From: Hans Verkuil <hverkuil@xxxxxxxxx>
• [PATCHv16 12/13] cec: s5p-cec: Add s5p-cec driver
  • From: Hans Verkuil <hverkuil@xxxxxxxxx>
• [PATCHv16 11/13] cec: adv7511: add cec support.
  • From: Hans Verkuil <hverkuil@xxxxxxxxx>
• [PATCHv16 10/13] cec: adv7842: add cec support
  • From: Hans Verkuil <hverkuil@xxxxxxxxx>
• [PATCHv16 08/13] DocBook/media: add CEC documentation
  • From: Hans Verkuil <hverkuil@xxxxxxxxx>
• [PATCHv16 05/13] cec/TODO: add TODO file so we know why this is still in staging
  • From: Hans Verkuil <hverkuil@xxxxxxxxx>
• [PATCHv16 06/13] cec: add compat32 ioctl support
  • From: Hans Verkuil <hverkuil@xxxxxxxxx>
• [PATCHv16 03/13] rc: Add HDMI CEC protocol handling
  • From: Hans Verkuil <hverkuil@xxxxxxxxx>
• [PATCHv16 02/13] HID: add HDMI CEC specific keycodes
  • From: Hans Verkuil <hverkuil@xxxxxxxxx>
• [PATCHv16 01/13] input.h: add BUS_CEC type
  • From: Hans Verkuil <hverkuil@xxxxxxxxx>
• [PATCHv16 00/13] HDMI CEC framework
  • From: Hans Verkuil <hverkuil@xxxxxxxxx>
• Re: [PATCH] ARM: exynos_defconfig: Disable big.LITTLE switcher
  • From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
• Re: [PATCH 0/3] phy: exynos-mipi-video: add support for Exynos 54xx SoCs
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• Re: [GIT PULL 1/3] ARM: dts: exynos: Secound round of DTS for v4.7
  • From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
• Re: [RFT PATCH 1/3] usb: misc: usb3503: Fix HUB mode after bootloader initialization
  • From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
• Re: [PATCH v2] media: vb2-dma-contig: configure DMA max segment size properly
  • From: Marek Szyprowski <m.szyprowski@xxxxxxxxxxx>
• Applied "regulator: max77686: Configure enable time to properly handle regulator enable" to the regulator tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [RFT PATCH 1/3] usb: misc: usb3503: Fix HUB mode after bootloader initialization
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH v2] media: vb2-dma-contig: configure DMA max segment size properly
  • From: Sakari Ailus <sakari.ailus@xxxxxx>
• [RFT PATCH 2/3] ARM: dts: exynos: Provide regulator for usb3503 on Odroid to fix device detection
  • From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
• [RFT PATCH 0/3] usb: misc: usb3503: Fix missing device when TFTP booting
  • From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
• [PATCH 3/3] regulator: max77686: Configure enable time to properly handle regulator enable
  • From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
• [RFT PATCH 1/3] usb: misc: usb3503: Fix HUB mode after bootloader initialization
  • From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
• Re: [GIT PULL 1/3] ARM: dts: exynos: Secound round of DTS for v4.7
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• [PATCH] ARM: dts: exynos: Add MFC memory banks for Peach boards
  • From: Javier Martinez Canillas <javier@xxxxxxxxxxxxxxx>
• Re: [GIT PULL 1/3] ARM: dts: exynos: Secound round of DTS for v4.7
  • From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
• Re: [PATCH] ARM: exynos_defconfig: Disable big.LITTLE switcher
  • From: Anand Moon <linux.amoon@xxxxxxxxx>
• Re: [GIT PULL 3/3] ARM: drivers: memory: SROM controller for v4.7
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• Re: [PATCH] ARM: exynos_defconfig: Disable big.LITTLE switcher
  • From: Javier Martinez Canillas <javier@xxxxxxxxxxxxxxx>
• Re: [GIT PULL 2/3] ARM: dts: exynos: Fixup for SROM controller (v4.7)
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• Re: [PATCH] ARM: exynos_defconfig: Disable big.LITTLE switcher
  • From: Markus Reichl <m.reichl@xxxxxxxxxxxxx>
• [PATCH] ARM: exynos_defconfig: Disable big.LITTLE switcher
  • From: Bartlomiej Zolnierkiewicz <b.zolnierkie@xxxxxxxxxxx>
• Re: [GIT PULL 1/3] ARM: dts: exynos: Secound round of DTS for v4.7
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• Re: [PATCH v2] media: vb2-dma-contig: configure DMA max segment size properly
  • From: Hans Verkuil <hansverk@xxxxxxxxx>
• Re: [PATCH v2] media: vb2-dma-contig: configure DMA max segment size properly
  • From: Hans Verkuil <hansverk@xxxxxxxxx>