On 5 April 2016 at 04:06, Yakir Yang <ykk@xxxxxxxxxxxxxx> wrote: > Hi Daniel, > > > On 03/31/2016 06:15 PM, Daniel Vetter wrote: >> >> On Mon, Feb 15, 2016 at 07:08:05PM +0800, Yakir Yang wrote: >>> >>> Hi all, >>> >>> The Samsung Exynos eDP controller and Rockchip RK3288 eDP controller >>> share the same IP, so a lot of parts can be re-used. I split the common >>> code into bridge directory, then rk3288 and exynos only need to keep >>> some platform code. Cause I can't find the exact IP name of exynos dp >>> controller, so I decide to name dp core driver with "analogix" which I >>> find in rk3288 eDP TRM >>> >>> But there are still three light registers setting different between >>> exynos and rk3288. >>> 1. RK3288 have five special pll registers which not indicate in exynos >>> dp controller. >>> 2. The address of DP_PHY_PD(dp phy power manager register) are different >>> between rk3288 and exynos. >>> 3. Rk3288 and exynos have different setting with AUX_HW_RETRY_CTL(dp >>> debug >>> register). >>> >>> Due to Mark Yao have introduced the ATOMIC support to Rockchip drm, so >>> it's >>> okay to use the ATOMIC helpers functions in connector_funcs. No need to >>> splict >>> the connector init to platform driver anymore, and this is the biggest >>> change >>> since version 11. >>> >>> This v14 didn't have lots of new changes which seems not the correct time >>> to >>> upgrade the version number, but I have changed ordering of patches >>> (adding 2 >>> more, and removing 2 out). Especially to prevent confusing people, so I >>> updated >>> the whole series. >> >> So I'm jumping into this part way late, but just noticed (well Thierry >> pointed this out to me) that the exynos dp driver reinvents all the dp and >> dp-aux helpers we already. That's somewhat okish for a private driver (and >> exynos has a reputation for that kind of stuff), but imo not ok for a >> shared driver. >> >> Not saying this should block merging this patch, but it really needs to be >> addressed. All the dp aux and edid read code in the current >> exynos_dp_core/reg.c files needs to be replaced with dp helpers and the >> core i2c edid reading code. >> >> Who's going to sign up to do this? > > > Volunteer to that, after finish this thread, I would send new series to > switch to take use of dp helper. Hi Yakir, do you have plans to do this work in the short term? If not, I can tackle it. Regards, Tomeu > :-D > - Yakir > > >> -Daniel >> >>> Thanks, >>> - Yakir >>> >>> >>> Changes in v14: >>> - Rebase the new changes in imx-dp driver >>> - Split up this patch into 3 parts, make this easy to review (Heiko) >>> - Remove the Rockchip DP PHY to an separate thread (Heiko) >>> https://patchwork.kernel.org/patch/8312701/ >>> >>> Changes in v13: >>> - Use .enable instead of preprare/commit in encoder_helper_funcs (Heiko) >>> - Fix the missing parameters with drm_encoder_init() helper function. >>> (Heiko) >>> >>> Changes in v12: >>> - Move the connector init to analogix_dp driver, and using ATOMIC helper >>> (Heiko) >>> - Add the ack from Jingoo >>> - Remove the enum link_rate_type struct, using the marcos in >>> drm_dp_helper.h (Jingoo) >>> >>> Changes in v11: >>> - Uses tabs to fix the indentation issues in analogix_dp_core.h (Heiko) >>> - Rename the "analogix,need-force-hpd" to common 'force-hpd' (Rob) >>> - Add the ack from Rob Herring >>> - Revert parts of Gustavo Padovan's changes in commit: >>> drm/exynos: do not start enabling DP at bind() phase >>> Add dp phy poweron function in bind time. >>> - Move the panel prepare from get_modes time to bind time, and move >>> the panel unprepare from bridge->disable to unbind time. (Heiko) >>> >>> Changes in v10: >>> - Add the ack from Rob Herring >>> - Correct the ROCKCHIP_ANALOGIX_DP indentation in Kconfig to tabs here >>> (Heiko) >>> - Add the ack from Rob Herring >>> - Remove the surplus "plat_data" check. (Heiko) >>> - switch (dp->plat_data && dp->plat_data->dev_type) { >>> + switch (dp->plat_data->dev_type) { >>> >>> Changes in v9: >>> - Document more details for 'ports' property. >>> >>> Changes in v8: >>> - Correct the right document path of display-timing.txt (Heiko) >>> - Correct the misspell of 'from' to 'frm'. (Heiko) >>> - Modify the commit subject name. (Heiko) >>> >>> Changes in v7: >>> - Back to use the of_property_read_bool() interfacs to provoid backward >>> compatibility of "hsync-active-high" "vsync-active-high" "interlaced" >>> to avoid -EOVERFLOW error (Krzysztof) >>> >>> Changes in v6: >>> - Fix the Kconfig recursive dependency (Javier) >>> - Fix Peach Pit hpd property name error: >>> - hpd-gpio = <&gpx2 6 0>; >>> + hpd-gpios = <&gpx2 6 0>; >>> >>> Changes in v5: >>> - Correct the check condition of gpio_is_valid when driver try to get >>> the "hpd-gpios" DT propery. (Heiko) >>> - Move the platform attach callback in the front of core driver bridge >>> attch function. Cause once platform failed at attach, core driver >>> should >>> still failed, so no need to init connector before platform attached >>> (Krzysztof) >>> - Keep code style no changes with the previous exynos_dp_code.c in this >>> patch, and update commit message about the new export symbol >>> (Krzysztof) >>> - Gather the device type patch (v4 11/16) into this one. (Krzysztof) >>> - leave out the connector registration to analogix platform driver. >>> (Thierry) >>> - Resequence this patch after analogix_dp driver have been split >>> from exynos_dp code, and rephrase reasonable commit message, and >>> remove some controversial style (Krzysztof) >>> - analogix_dp_write_byte_to_dpcd( >>> - dp, DP_TEST_RESPONSE, >>> + analogix_dp_write_byte_to_dpcd(dp, >>> + DP_TEST_RESPONSE, >>> DP_TEST_EDID_CHECKSUM_WRITE); >>> - Switch video timing type to "u32", so driver could use >>> "of_property_read_u32" >>> to get the backword timing values. Krzysztof suggest me that driver >>> could use >>> the "of_property_read_bool" to get backword timing values, but that >>> interfacs >>> would modify the original drm_display_mode timing directly (whether >>> those >>> properties exists or not). >>> - Correct the misspell in commit message. (Krzysztof) >>> - Remove the empty line at the end of document, and correct the endpoint >>> numbers in the example DT node, and remove the regulator iomux setting >>> in driver code while using the pinctl in devicetree instead. (Heiko) >>> - Add device type declared, cause the previous "platform device type >>> support (v4 11/16)" already merge into (v5 02/14). >>> - Implement connector registration code. (Thierry) >>> - Split binding doc's from driver changes. (Rob) >>> - Add eDP hotplug pinctrl property. (Heiko) >>> >>> Changes in v4: >>> - Update "analogix,hpd-gpios" to "hpd-gpios" DT propery. (Rob) >>> - Rename "analogix_dp-exynos.c" file name to "exynos_dp.c" (Jingoo) >>> - Create a separate folder for analogix code in bridge/ (Archit) >>> - Update commit message more readable. (Jingoo) >>> - Adjust the order from 05 to 04 >>> - Provide backword compatibility with samsung. (Krzysztof) >>> - Split all DTS changes, and provide backward compatibility. Mark old >>> properties as deprecated but still support them. (Krzysztof) >>> - Update "analogix,hpd-gpio" to "hpd-gpios" prop name. (Rob) >>> - Deprecated some properties which could parsed from Edid/Mode/DPCD. >>> (Thierry) >>> "analogix,color-space" & "analogix,color-depth" & >>> "analogix,link-rate" & "analogix,lane-count" & >>> "analogix,ycbcr-coeff" & "analogix,dynamic-range" & >>> "vsync-active-high" & "hsync-active-high" & "interlaces" >>> - Separate all DTS changes to a separate patch. (Krzysztof) >>> - Remove some deprecated DT properties in rockchip dp document. >>> - Seprate the link-rate and lane-count limit out with the device_type >>> flag. (Thierry) >>> - Take Jingoo suggest, add commit messages. >>> - Call drm_panel_prepare() in .get_modes function, ensure panel should >>> power on before driver try to read edid message. >>> >>> Changes in v3: >>> - Move exynos's video_timing code to analogix_dp-exynos platform driver, >>> add get_modes method to struct analogix_dp_plat_data. (Thierry) >>> - Rename some "samsung*" dts propery to "analogix*". (Heiko) >>> - The link_rate and lane_count shouldn't config to the DT property value >>> directly, but we can take those as hardware limite. For example, >>> RK3288 >>> only support 4 physical lanes of 2.7/1.62 Gbps/lane, so DT property >>> would >>> like "link-rate = 0x0a" "lane-count = 4". (Thierry) >>> - Dynamic parse video timing info from struct drm_display_mode and >>> struct drm_display_info. (Thierry) >>> - Add devicetree binding documents. (Heiko) >>> - Remove sync pol & colorimetry properies from the new analogix dp driver >>> devicetree binding. (Thierry) >>> - Update the exist exynos dtsi file with the latest DP DT properies. >>> - Leave "sclk_edp_24m" to rockchip dp phy driver which name to "24m", >>> and leave "sclk_edp" to analogix dp core driver which name to "dp", >>> and leave "pclk_edp" to rockchip dp platform driver which name to >>> "pclk". (Thierry & Heiko) >>> - Add devicetree binding document. (Heiko) >>> - Remove "rockchip,panel" DT property, take use of remote point to get >>> panel >>> node. (Heiko) >>> - Add the new function point dp_platdata->get_modes() init. >>> - Add "analogix,need-force-hpd" to indicate whether driver need foce >>> hpd when hpd detect failed. >>> - move dp hpd detect to connector detect function. >>> - Add edid modes parse support >>> >>> Changes in v2: >>> - Remove new copyright (Jingoo) >>> - Fix compiled failed due to analogix_dp_device misspell >>> - Improved commit message more readable, and avoid using some >>> uncommon style like bellow: (Joe Preches) >>> - retval = exynos_dp_read_bytes_from_i2c(... >>> ...); >>> + retval = >>> + exynos_dp_read_bytes_from_i2c(......); >>> - Get panel node with remote-endpoint method, and create devicetree >>> binding >>> for driver. (Heiko) >>> - Remove the clock enable/disbale with "sclk_edp" & "sclk_edp_24m", >>> leave those clock to rockchip dp phy driver. >>> - Fix compile failed dut to phy_pd_addr variable misspell error >>> >>> Heiko Stuebner (2): >>> drm/exynos: dp: rename implementation specific driver part >>> drm: bridge: analogix/dp: rename register constants >>> >>> Yakir Yang (15): >>> drm: bridge: analogix/dp: split exynos dp driver to bridge directory >>> drm: bridge: analogix/dp: fix some obvious code style >>> drm: bridge: analogix/dp: remove duplicate configuration of link rate >>> and link count >>> drm: bridge: analogix/dp: dynamic parse sync_pol & interlace & >>> dynamic_range >>> dt-bindings: add document for analogix display port driver >>> ARM: dts: exynos/dp: remove some properties that deprecated by >>> analogix_dp driver >>> drm: rockchip: dp: add rockchip platform dp driver >>> dt-bindings: add document for rockchip variant of analogix_dp >>> drm: bridge: analogix/dp: add some rk3288 special registers setting >>> drm: bridge: analogix/dp: add max link rate and lane count limit for >>> RK3288 >>> drm: bridge: analogix/dp: try force hpd after plug in lookup failed >>> drm: bridge: analogix/dp: move hpd detect to connector detect function >>> drm: bridge: analogix/dp: add edid modes parse in get_modes method >>> drm: bridge: analogix/dp: add panel prepare/unprepare in >>> suspend/resume time >>> drm: bridge: analogix/dp: Fix the possible dead lock in bridge disable >>> time >>> >>> .../bindings/display/bridge/analogix_dp.txt | 52 + >>> .../bindings/display/exynos/exynos_dp.txt | 93 +- >>> .../display/rockchip/analogix_dp-rockchip.txt | 92 ++ >>> arch/arm/boot/dts/exynos5250-arndale.dts | 2 - >>> arch/arm/boot/dts/exynos5250-smdk5250.dts | 2 - >>> arch/arm/boot/dts/exynos5250-snow-common.dtsi | 4 +- >>> arch/arm/boot/dts/exynos5250-spring.dts | 4 +- >>> arch/arm/boot/dts/exynos5420-peach-pit.dts | 4 +- >>> arch/arm/boot/dts/exynos5420-smdk5420.dts | 2 - >>> arch/arm/boot/dts/exynos5800-peach-pi.dts | 2 - >>> drivers/gpu/drm/bridge/Kconfig | 2 + >>> drivers/gpu/drm/bridge/Makefile | 1 + >>> drivers/gpu/drm/bridge/analogix/Kconfig | 3 + >>> drivers/gpu/drm/bridge/analogix/Makefile | 1 + >>> drivers/gpu/drm/bridge/analogix/analogix_dp_core.c | 1430 >>> ++++++++++++++++++ >>> drivers/gpu/drm/bridge/analogix/analogix_dp_core.h | 281 ++++ >>> drivers/gpu/drm/bridge/analogix/analogix_dp_reg.c | 1320 >>> +++++++++++++++++ >>> .../analogix/analogix_dp_reg.h} | 270 ++-- >>> drivers/gpu/drm/exynos/Kconfig | 3 +- >>> drivers/gpu/drm/exynos/Makefile | 2 +- >>> drivers/gpu/drm/exynos/exynos_dp.c | 324 +++++ >>> drivers/gpu/drm/exynos/exynos_dp_core.c | 1510 >>> -------------------- >>> drivers/gpu/drm/exynos/exynos_dp_core.h | 282 ---- >>> drivers/gpu/drm/exynos/exynos_dp_reg.c | 1263 >>> ---------------- >>> drivers/gpu/drm/rockchip/Kconfig | 9 + >>> drivers/gpu/drm/rockchip/Makefile | 1 + >>> drivers/gpu/drm/rockchip/analogix_dp-rockchip.c | 384 +++++ >>> include/drm/bridge/analogix_dp.h | 41 + >>> 28 files changed, 4115 insertions(+), 3269 deletions(-) >>> create mode 100644 >>> Documentation/devicetree/bindings/display/bridge/analogix_dp.txt >>> create mode 100644 >>> Documentation/devicetree/bindings/display/rockchip/analogix_dp-rockchip.txt >>> create mode 100644 drivers/gpu/drm/bridge/analogix/Kconfig >>> create mode 100644 drivers/gpu/drm/bridge/analogix/Makefile >>> create mode 100644 drivers/gpu/drm/bridge/analogix/analogix_dp_core.c >>> create mode 100644 drivers/gpu/drm/bridge/analogix/analogix_dp_core.h >>> create mode 100644 drivers/gpu/drm/bridge/analogix/analogix_dp_reg.c >>> rename drivers/gpu/drm/{exynos/exynos_dp_reg.h => >>> bridge/analogix/analogix_dp_reg.h} (62%) >>> create mode 100644 drivers/gpu/drm/exynos/exynos_dp.c >>> delete mode 100644 drivers/gpu/drm/exynos/exynos_dp_core.c >>> delete mode 100644 drivers/gpu/drm/exynos/exynos_dp_core.h >>> delete mode 100644 drivers/gpu/drm/exynos/exynos_dp_reg.c >>> create mode 100644 drivers/gpu/drm/rockchip/analogix_dp-rockchip.c >>> create mode 100644 include/drm/bridge/analogix_dp.h >>> >>> -- >>> 1.9.1 >>> >>> >>> _______________________________________________ >>> dri-devel mailing list >>> dri-devel@xxxxxxxxxxxxxxxxxxxxx >>> https://lists.freedesktop.org/mailman/listinfo/dri-devel > > > > _______________________________________________ > dri-devel mailing list > dri-devel@xxxxxxxxxxxxxxxxxxxxx > https://lists.freedesktop.org/mailman/listinfo/dri-devel -- To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
 |