On 08/02/2016 12:16 PM, Seung-Woo Kim wrote: >>From pwm_samsung_calc_tin(), there is routine to find the lowest > divider possible to generate lower frequency than requested one. > But it is always possible to generate requested frequency with > large enough modulation bits, so this patch fixes to use lowest > div for the case. This patch removes following UBSAN warning: > > UBSAN: Undefined behaviour in drivers/pwm/pwm-samsung.c:197:13 > shift exponent 32 is too large for 32-bit type 'long unsigned int' > [...] > [<c0670248>] (ubsan_epilogue) from [<c06707b4>] (__ubsan_handle_shift_out_of_bounds+0xd8/0x120) > [<c06707b4>] (__ubsan_handle_shift_out_of_bounds) from [<c0694b28>] (pwm_samsung_config+0x508/0x6a4) > [<c0694b28>] (pwm_samsung_config) from [<c069286c>] (pwm_apply_state+0x174/0x40c) > [<c069286c>] (pwm_apply_state) from [<c0b2e070>] (pwm_fan_probe+0xc8/0x488) > [<c0b2e070>] (pwm_fan_probe) from [<c07ba8b0>] (platform_drv_probe+0x70/0x150) > [...] > > Signed-off-by: Seung-Woo Kim <sw0312.kim@xxxxxxxxxxx> > --- > The UBSAN warning from ARM is reported with the patch in following link: > https://patchwork.kernel.org/patch/9189575/ > --- > drivers/pwm/pwm-samsung.c | 10 +++++++--- > 1 file changed, 7 insertions(+), 3 deletions(-) > > diff --git a/drivers/pwm/pwm-samsung.c b/drivers/pwm/pwm-samsung.c > index ada2d32..ff0def6 100644 > --- a/drivers/pwm/pwm-samsung.c > +++ b/drivers/pwm/pwm-samsung.c > @@ -193,9 +193,13 @@ static unsigned long pwm_samsung_calc_tin(struct samsung_pwm_chip *chip, > * divider settings and choose the lowest divisor that can generate > * frequencies lower than requested. > */ > - for (div = variant->div_base; div < 4; ++div) > - if ((rate >> (variant->bits + div)) < freq) > - break; > + if (fls(rate) <= variant->bits) { > + div = variant->div_base; > + } else { > + for (div = variant->div_base; div < 4; ++div) > + if ((rate >> (variant->bits + div)) < freq) > + break; > + } I have trouble with understanding the idea behind initial code from Tomasz (commit 11ad39ede24ee). The variant->bits for all SoC except S3C24xx is 32. This means the shift: if ((rate >> (variant->bits + div)) < freq) will be always by 32 or more... In practice this will choose always a "div" of 0 because in first iteration of this loop, the shift will be by 32. This looks weird and the fix does not really remove the weirdness out of it. Best regards, Krzysztof -- To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
 |