On Thu, Jul 21, 2016 at 9:14 AM, Yakir Yang <ykk@xxxxxxxxxxxxxx> wrote:
> According to page 16 of Sharp LQ123P1JX31 datasheet, we need to add the
> missing delay timing. Panel prepare time should be t1 (0.5ms~10ms) plus
> t3 (0ms~100ms), and panel enable time should equal to t7 (0ms~50ms), and
> panel unprepare time should be t11 (1ms~50ms) plus t12 (500ms~).
>
> Signed-off-by: Yakir Yang <ykk@xxxxxxxxxxxxxx>
Reviewed-by: Sean Paul <seanpaul@xxxxxxxxxxxx>
> ---
> drivers/gpu/drm/panel/panel-simple.c | 5 +++++
> 1 file changed, 5 insertions(+)
>
> diff --git a/drivers/gpu/drm/panel/panel-simple.c b/drivers/gpu/drm/panel/panel-simple.c
> index 85143d1..f178998 100644
> --- a/drivers/gpu/drm/panel/panel-simple.c
> +++ b/drivers/gpu/drm/panel/panel-simple.c
> @@ -1384,6 +1384,11 @@ static const struct panel_desc sharp_lq123p1jx31 = {
> .width = 259,
> .height = 173,
> },
> + .delay = {
> + .prepare = 110,
> + .enable = 50,
> + .unprepare = 550,
> + },
> };
>
> static const struct drm_display_mode shelly_sca07010_bfn_lnn_mode = {
> --
> 1.9.1
>
>
--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
