Linux for Texus Instruments OMAP Processors

• Thread Index

• RE: DSP MMU Fault
  • From: "Can Bal" <canbal@xxxxxxxxxxxxxxxxx>
• Re: [RFC][PATCH] Add support for hook switch on ams-delta
  • From: Janusz Krzysztofik <jkrzyszt@xxxxxxxxxxxx>
• RE: [PATCH] OMAP2/3 Avoid GPIO pending irq status been set after irq_disable
  • From: "Wang Sawsd-A24013" <cqwang@xxxxxxxxxxxx>
• Re: [PATCH][RFC] OMAP4: I2C Support for OMAP_4430SDP
  • From: Jagadeesh Bhaskar Pakaravoor <jagadeeshbp@xxxxxxxxx>
• Re: [PATCH] OMAP2/3 Avoid GPIO pending irq status been set after irq_disable
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• DSS porting problems
  • From: Gary Thomas <gary@xxxxxxxxxxxx>
• Re: [Linux-fbdev-devel] [PATCH 00/20] omapfb: Add support for new LCDs / misc fixes
  • From: Krzysztof Helt <krzysztof.h1@xxxxxxxxx>
• Re: [RFC] [PATCH] input: add definition for handset pick up switch event
  • From: Janusz Krzysztofik <jkrzyszt@xxxxxxxxxxxx>
• Early gpio_request on LDP for LCD fails
  • From: "Venkatesh, Subbu" <subbu.wrs@xxxxxx>
• RE: [PATCH] OMAP2/3 Avoid GPIO pending irq status been set after irq_disable
  • From: "Wang Sawsd-A24013" <cqwang@xxxxxxxxxxxx>
• [RFC] [PATCH] input: add definition for handset pick up switch event
  • From: Janusz Krzysztofik <jkrzyszt@xxxxxxxxxxxx>
• Re: [PATCH 1/2] omap: twl4030_wdt: twl4030 watchdog driver
  • From: Wim Van Sebroeck <wim@xxxxxxxxx>
• Re: [RFC][PATCH] Add support for hook switch on ams-delta
  • From: Jonathan McDowell <noodles@xxxxxxxx>
• Please help on testing new sound driver for OMAP1510 based machine
  • From: Janusz Krzysztofik <jkrzyszt@xxxxxxxxxxxx>
• [PATCH 16/20] omapfb: dispc: Allow multiple external IRQ handlers
  • From: Imre Deak <imre.deak@xxxxxxxxx>
• [PATCH 19/20] omapfb: Add FB manual update option to Kconfig
  • From: Imre Deak <imre.deak@xxxxxxxxx>
• [PATCH 15/20] omapfb: dispc: Enable wake up capability
  • From: Imre Deak <imre.deak@xxxxxxxxx>
• [PATCH 20/20] omapfb: HWA742: fix pointer to be const
  • From: Imre Deak <imre.deak@xxxxxxxxx>
• [PATCH 18/20] omapfb: Fix coding style / remove dead line
  • From: Imre Deak <imre.deak@xxxxxxxxx>
• [PATCH 09/20] omapfb: Add support for the OMAP3 Beagle DVI output
  • From: Imre Deak <imre.deak@xxxxxxxxx>
• [PATCH 11/20] omapfb: Add support for the ZOOM MDK LCD
  • From: Imre Deak <imre.deak@xxxxxxxxx>
• [PATCH 17/20] omapfb: suspend/resume only if FB device is already initialized
  • From: Imre Deak <imre.deak@xxxxxxxxx>
• [PATCH 07/20] omapfb: Add support for the 3430SDP LCD
  • From: Imre Deak <imre.deak@xxxxxxxxx>
• [PATCH 13/20] omapfb: dispc: Various typo fixes
  • From: Imre Deak <imre.deak@xxxxxxxxx>
• [PATCH 10/20] omapfb: Add support for the Gumstix Overo LCD
  • From: Imre Deak <imre.deak@xxxxxxxxx>
• [PATCH 12/20] omapfb: Add support for rotation on the Blizzard LCD ctrl
  • From: Imre Deak <imre.deak@xxxxxxxxx>
• [PATCH 14/20] omapfb: dispc: Disable iface clocks along with func clocks
  • From: Imre Deak <imre.deak@xxxxxxxxx>
• [PATCH 04/20] omapfb: Add support for the Amstrad Delta LCD
  • From: Imre Deak <imre.deak@xxxxxxxxx>
• [PATCH 05/20] omapfb: Add support for the 2430SDP LCD
  • From: Imre Deak <imre.deak@xxxxxxxxx>
• [PATCH 08/20] omapfb: Add support for the OMAP3 EVM LCD
  • From: Imre Deak <imre.deak@xxxxxxxxx>
• [PATCH 02/20] omapfb: Add support for MIPI-DCS compatible LCDs
  • From: Imre Deak <imre.deak@xxxxxxxxx>
• [PATCH 06/20] omapfb: Add support for the OMAP2EVM LCD
  • From: Imre Deak <imre.deak@xxxxxxxxx>
• [PATCH 03/20] N770: Enable LCD MIPI-DCS in Kconfig
  • From: Imre Deak <imre.deak@xxxxxxxxx>
• [PATCH 01/20] omapfb: Add support for the Apollon LCD
  • From: Imre Deak <imre.deak@xxxxxxxxx>
• [PATCH 00/20] omapfb: Add support for new LCDs / misc fixes
  • From: Imre Deak <imre.deak@xxxxxxxxx>
• RE: [PATCH] OMAP2/3 Avoid GPIO pending irq status been set after irq_disable
  • From: "Wang Sawsd-A24013" <cqwang@xxxxxxxxxxxx>
• Re: [PATCH] OMAP2/3 Avoid GPIO pending irq status been set after irq_disable
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] [MTD] [NAND] Add prefetch and dma support for omap2/3 NAND driver
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: LDP support
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: Question OMAP3 and PM
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• Re: LDP support
  • From: Imre Deak <imre.deak@xxxxxxxxx>
• RE: DSP MMU Fault
  • From: "Kanigeri, Hari" <h-kanigeri2@xxxxxx>
• [PATCH] DSPBRIDGE: Compiler wanrning fix for unlocked_ioctl
  • From: Ameya Palande <ameya.palande@xxxxxxxxx>
• [PATCH] DSPBRIDGE: Use GT_trace for CLk_Disable message
  • From: Ameya Palande <ameya.palande@xxxxxxxxx>
• DSP MMU Fault
  • From: "Can Bal" <canbal@xxxxxxxxxxxxxxxxx>
• RE: [PATCH] OMAP3: PM: 2 new entries in SDRC table for Qimonda HYB18M512160AF-6
  • From: "Nayak, Rajendra" <rnayak@xxxxxx>
• Re: MUSB ISSUE on OMAP3530 with USB-2-Ethernet converter
  • From: Felipe Balbi <felipe.balbi@xxxxxxxxx>
• Re: MUSB ISSUE on OMAP3530 with USB-2-Ethernet converter
  • From: Remith Ravi <remithmailinglist@xxxxxxxxx>
• Re: [PATCH] [MTD] [NAND] Add prefetch and dma support for omap2/3 NAND driver
  • From: "vimal singh" <vimalsingh@xxxxxx>
• Re: DSS2: Compilation Error on Git tree http://www.bat.org/~tomba/git/linux-omap-dss.git
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxxxxx>
• Question OMAP3 and PM
  • From: Kevyn-Alexandre Paré <kevyn.alexandre.pare@xxxxxxxxx>
• OMAP: sporadic hard lock-up when GPIO interrupts occur too fast (with preempt-RT and PREEMPT_HARDIRQ)
  • From: Hugo Vincent <hugo.vincent@xxxxxxxxx>
• Re: LDP support
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: LDP support
  • From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
• [ANNOUNCE] TI dspbridge Omapzoom tree
  • From: "Ramirez Luna, Omar" <omar.ramirez@xxxxxx>
• RE: [PATCH] OMAP2/3 Avoid GPIO pending irq status been set after irq_disable
  • From: "Wang Sawsd-A24013" <cqwang@xxxxxxxxxxxx>
• Re: LDP support
  • From: Imre Deak <imre.deak@xxxxxxxxx>
• Re: [PATCH/RFC] ARM: OMAP: Initialize MADC clock divider and clock
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH/RFC] ARM: OMAP: Initialize MADC clock divider and clock
  • From: Steve Sakoman <sakoman@xxxxxxxxx>
• Re: [APPLIED] [RFC][PATCH] Add support for hook switch on ams-delta
  • From: Janusz Krzysztofik <jkrzyszt@xxxxxxxxxxxx>
• [APPLIED] [PATCH] [PATCH] twl4030: Add some error checking to twl4030 init
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] [PATCH] twl4030: Add some error checking to twl4030 init
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] ARM: Move clk_add_alias() to arch/arm/common/clkdev.c (Re: [PATCH 05/10] ARM: OMAP1: Make 770 LCD work)
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [APPLIED] [RFC][PATCH] Add support for hook switch on ams-delta
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] [MTD] [NAND] Add prefetch and dma support for omap2/3 NAND driver
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] OMAP3 Overo: add EXPORT_SYMBOLs for Overo ASoC audio to be built as a module.
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH] DSPBRIDGE: Revert removing all resources on proc detach
  • From: Omar Ramirez Luna <omar.ramirez@xxxxxx>
• DSS2: Compilation Error on Git tree http://www.bat.org/~tomba/git/linux-omap-dss.git
  • From: "Venkatesh, Subbu" <subbu.wrs@xxxxxx>
• Re: [PATCH] OMAP3 Overo: add EXPORT_SYMBOLs for Overo ASoC audio to be built as a module.
  • From: Jarkko Nikula <jhnikula@xxxxxxxxx>
• Re: [RFC][PATCH] Add support for hook switch on ams-delta
  • From: Janusz Krzysztofik <jkrzyszt@xxxxxxxxxxxx>
• Re: [PATCH] [PATCH] twl4030: Add some error checking to twl4030 init
  • From: Amit Kucheria <amit.kucheria@xxxxxxxxxxxxx>
• Re: *SPAM* Re: Please help in adding ams-delta support to ASoC
  • From: Janusz Krzysztofik <jkrzyszt@xxxxxxxxxxxx>
• Re: [APPLIED] [RFC][PATCH] Add support for hook switch on ams-delta
  • From: Janusz Krzysztofik <jkrzyszt@xxxxxxxxxxxx>
• Re: Please help in adding ams-delta support to ASoC
  • From: Janusz Krzysztofik <jkrzyszt@xxxxxxxxxxxx>
• Re: [RFC][PATCH] OMAP3: add support for 2 SDRAM chip selects (was: Re: Beagleboard rev C memory timings & suspend/resume)
  • From: Jean Pihet <jpihet@xxxxxxxxxx>
• RE: [PATCH] [MTD] [NAND] Add prefetch and dma support for omap2/3 NAND driver
  • From: "Singh, Vimal" <IMCEAEX-_O=TI_OU=BD_CN=RECIPIENTS_CN=X0094262@xxxxxxxxxxxxxxxxx>
• Re: *SPAM* Re: Please help in adding ams-delta support to ASoC
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxxxxx>
• Re: [PATCH] OMAP2/3 Avoid GPIO pending irq status been set after irq_disable
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] OMAP3: PM: 2 new entries in SDRC table for Qimonda HYB18M512160AF-6
  • From: Paul Walmsley <paul@xxxxxxxxx>
• Re: [RFC][PATCH] OMAP3: add support for 2 SDRAM chip selects (was: Re: Beagleboard rev C memory timings & suspend/resume)
  • From: Paul Walmsley <paul@xxxxxxxxx>
• Re: [RFC][PATCH] Add support for hook switch on ams-delta
  • From: Jonathan McDowell <noodles@xxxxxxxx>
• Re: DSS2: How to test TV and LCD output simulatenously
  • From: Gary Thomas <gary@xxxxxxxxxxxx>
• Re: [PATCH] [MTD] [NAND] Add prefetch and dma support for omap2/3 NAND driver
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• RE: DSS2: How to test TV and LCD output simulatenously
  • From: "Venkatesh, Subbu" <subbu.wrs@xxxxxx>
• Re: DSS2: How to test TV and LCD output simulatenously
  • From: Gary Thomas <gary@xxxxxxxxxxxx>
• [APPLIED] [PATCH] mmc-twl4030: use correct controller in twl_mmc23_set_power
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: Patch: Init/shutdown correctness fixes for drivers/cbus/tahvo*
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [APPLIED] [RFC][PATCH] Add support for hook switch on ams-delta
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [APPLIED] [RFC][PATCH] Add support for hook switch on ams-delta
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 2/2] McSPI Slave and DMA,FIFO support
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 1/2] McSPI Slave and DMA,FIFO support
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 2/2] I2C: OMAP3: Better noise suppression for fast/standard modes
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 1/2] I2C: OMAP2/3: Fix scll/sclh calculations
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [APPLIED] [PATCH] ARM:OMAP: Enable MADC on Overo
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: PM branch updates
  • From: Sergey Chemishkian <schemish@xxxxxxxxx>
• [APPLIED] [PATCH] ARM:OMAP: Enable MADC on Overo
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] OMAP3 Overo: add EXPORT_SYMBOLs for Overo ASoC audio to be built as a module.
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: Please help in adding ams-delta support to ASoC
  • From: Jarkko Nikula <jhnikula@xxxxxxxxx>
• RE: [PATCH] OMAP2/3 Avoid GPIO pending irq status been set after irq_disable
  • From: "Wang Sawsd-A24013" <cqwang@xxxxxxxxxxxx>
• Re: DSS2: How to test TV and LCD output simulatenously
  • From: Gary Thomas <gary@xxxxxxxxxxxx>
• RE: DSS2: How to test TV and LCD output simulatenously
  • From: "Venkatesh, Subbu" <subbu.wrs@xxxxxx>
• Re: DSS2: How to test TV and LCD output simulatenously
  • From: Gary Thomas <gary@xxxxxxxxxxxx>
• Re: [PATCH] OMAP2/3 Avoid GPIO pending irq status been set after irq_disable
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• Re: Please help in adding ams-delta support to ASoC
  • From: Janusz Krzysztofik <jkrzyszt@xxxxxxxxxxxx>
• RE: DSS2: How to test TV and LCD output simulatenously
  • From: "Venkatesh, Subbu" <subbu.wrs@xxxxxx>
• RE: DSS2: How to test TV and LCD output simulatenously
  • From: "Venkatesh, Subbu" <subbu.wrs@xxxxxx>
• Re: DSS2: How to test TV and LCD output simulatenously
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxxxxx>
• Re: DSS2: How to test TV and LCD output simulatenously
  • From: Gary Thomas <gary@xxxxxxxxxxxx>
• Re: [alsa-devel] Please help in adding ams-delta support to ASoC
  • From: Janusz Krzysztofik <jkrzyszt@xxxxxxxxxxxx>
• Re: *SPAM* Re: Please help in adding ams-delta support to ASoC
  • From: Janusz Krzysztofik <jkrzyszt@xxxxxxxxxxxx>
• Re: [alsa-devel] Please help in adding ams-delta support to ASoC
  • From: Mark Brown <broonie@xxxxxxxxxxxxxxxxxxxxxxxxxxx>
• Re: DSS2: How to test TV and LCD output simulatenously
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxxxxx>
• Re: [alsa-devel] Please help in adding ams-delta support to ASoC
  • From: Janusz Krzysztofik <jkrzyszt@xxxxxxxxxxxx>
• Re: Please help in adding ams-delta support to ASoC
  • From: Jarkko Nikula <jhnikula@xxxxxxxxx>
• Re: Please help in adding ams-delta support to ASoC
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxxxxx>
• Re: [alsa-devel] Please help in adding ams-delta support to ASoC
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxxxxx>
• Re: DSS2: How to test TV and LCD output simulatenously
  • From: halli manjunatha <hallimanju@xxxxxxxxx>
• DSS2: How to test TV and LCD output simulatenously
  • From: "Venkatesh, Subbu" <subbu.wrs@xxxxxx>
• [PATCH] OMAP3 Overo: add EXPORT_SYMBOLs for Overo ASoC audio to be built as a module.
  • From: Hugo Vincent <hugo.vincent@xxxxxxxxx>
• [PATCH] OMAP2/3 Avoid GPIO pending irq status been set after irq_disable
  • From: "Wang Sawsd-A24013" <cqwang@xxxxxxxxxxxx>
• [PATCH] OMAP2/3 Avoid GPIO pending irq status been set after irq_disable
  • From: "Wang Sawsd-A24013" <cqwang@xxxxxxxxxxxx>
• Re: Tracking N770 breakage
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [APPLIED] Patch: Fix N770 brf6150 bluetooth driver
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [APPLIED] Patch: Fix N770 MMC support
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: Please help in adding ams-delta support to ASoC
  • From: Jarkko Nikula <jhnikula@xxxxxxxxx>
• RE: DSS2: SYNC Lost error on mirroring enabled
  • From: "Venkatesh, Subbu" <subbu.wrs@xxxxxx>
• Re: [PATCH 00/10] OMAP clock/powerdomain/SDRC patches for post-2.6.30
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 00/10] OMAP clock/powerdomain/SDRC patches for post-2.6.30
  • From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
• Re: [PATCH 00/10] OMAP clock/powerdomain/SDRC patches for post-2.6.30
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: LDP support
  • From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
• Re: LDP support
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• RE: LDP support
  • From: "Woodruff, Richard" <r-woodruff2@xxxxxx>
• RE: LDP support
  • From: "Woodruff, Richard" <r-woodruff2@xxxxxx>
• Re: [PATCH 05/10] ARM: OMAP1: Make 770 LCD work
  • From: Kalle Valo <kalle.valo@xxxxxx>
• Re: Please help in adding ams-delta support to ASoC
  • From: Janusz Krzysztofik <jkrzyszt@xxxxxxxxxxxx>
• [PATCH] OMAP3: PM: 2 new entries in SDRC table for Qimonda HYB18M512160AF-6
  • From: Rajendra Nayak <rnayak@xxxxxx>
• Re: LDP support
  • From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
• Re: LDP support
  • From: Felipe Balbi <felipe.balbi@xxxxxxxxx>
• RE: LDP support
  • From: "Woodruff, Richard" <r-woodruff2@xxxxxx>
• Re: LDP support
  • From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
• Re: prepatch: work around broken brf6150 PM code
  • From: Andrew de Quincey <adq@xxxxxxxxxxxxx>
• prepatch: work around broken brf6150 PM code
  • From: Andrew de Quincey <adq_dvb@xxxxxxxxxxxxx>
• prepatch: Fix brf6510 cleanup code
  • From: Andrew de Quincey <adq_dvb@xxxxxxxxxxxxx>
• [PATCH/RFC] ARM: OMAP: Initialize MADC clock divider and clock
  • From: Steve Sakoman <sakoman@xxxxxxxxx>
• Re: [PATCH/RFC] ARM: OMAP: Initialize MADC clock divider and clock
  • From: Steve Sakoman <sakoman@xxxxxxxxx>
• [PATCH] ARM:OMAP: Enable MADC on Overo
  • From: Steve Sakoman <sakoman@xxxxxxxxx>
• Trying to get OMAP3530 twl4030-usb interrupt to trigger
  • From: Peter Barada <peterb@xxxxxxxxxxx>
• Re: [PATCH][RFC] OMAP4: I2C Support for OMAP_4430SDP
  • From: Nishanth Menon <menon.nishanth@xxxxxxxxx>
• Re: Git pull request for omap patches for merge window after 2.6.30, v2
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH][RFC] OMAP4: I2C Support for OMAP_4430SDP
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• [PATCH][RFC] OMAP4: I2C Support for OMAP_4430SDP
  • From: "Syed Rafiuddin" <rafiuddin.syed@xxxxxx>
• RE: DSS2: SYNC Lost error on mirroring enabled
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxxxxx>
• RE: DSS2: SYNC Lost error on mirroring enabled
  • From: "Venkatesh, Subbu" <subbu.wrs@xxxxxx>
• [PATCH 1/4 v2] ARM: OMAP4: SMP: Add OMAP4430 SMP board files
  • From: Santosh Shilimkar <santosh.shilimkar@xxxxxx>
• Re: [PATCH 2/8] ARM: OMAP3: Initialize regulators for Beagle and Overo
  • From: Mark Brown <broonie@xxxxxxxxxxxxxxxxxxxxxxxxxxx>
• Re: MUSB ISSUE on OMAP3530 with USB-2-Ethernet converter
  • From: Felipe Balbi <felipe.balbi@xxxxxxxxx>
• MUSB ISSUE on OMAP3530 with USB-2-Ethernet converter
  • From: umesh krishnan <umeshdelhi@xxxxxxxxx>
• RE: [PATCH 02/06] OMAP3: PM: Add PER wakeup dependency on WKUP domain
  • From: "Nayak, Rajendra" <rnayak@xxxxxx>
• [PATCH 10/10][RFC] OMAP4: PM: Adds a few CM1/2 clock nodes
  • From: Rajendra Nayak <rnayak@xxxxxx>
• [PATCH 09/10][RFC] OMAP4: PM: UNIPRO DPLL clock nodes
  • From: Rajendra Nayak <rnayak@xxxxxx>
• [PATCH 08/10][RFC] OMAP4: PM: IVA DPLL clock nodes
  • From: Rajendra Nayak <rnayak@xxxxxx>
• [PATCH 06/10][RFC] OMAP4: PM: CORE DPLL clock nodes
  • From: Rajendra Nayak <rnayak@xxxxxx>
• [PATCH 07/10][RFC] OMAP4: PM: MPU DPLL clock nodes
  • From: Rajendra Nayak <rnayak@xxxxxx>
• [PATCH 05/10][RFC] OMAP4: PM: PER DPLL clock nodes
  • From: Rajendra Nayak <rnayak@xxxxxx>
• [PATCH 04/10][RFC] OMAP4: PM: ABE DPLL clock nodes
  • From: Rajendra Nayak <rnayak@xxxxxx>
• [PATCH 03/10][RFC] OMAP4: PM: Add a dummy node to prevent crash at bootup
  • From: Rajendra Nayak <rnayak@xxxxxx>
• [PATCH 02/10][RFC] OMAP4: PM: Basic OMAP4 clock framework
  • From: Rajendra Nayak <rnayak@xxxxxx>
• [PATCH 01/10][RFC] OMAP4: PM: Basic OMAP4 clock nodes
  • From: Rajendra Nayak <rnayak@xxxxxx>
• [PATCH 00/10][RFC] Basic OMAP4 Clock framework support
  • From: "Nayak, Rajendra" <rnayak@xxxxxx>
• [PATCH 04/06][RFC] OMAP4: PM: Adds PRM register shift and mask bits
  • From: Rajendra Nayak <rnayak@xxxxxx>
• [PATCH 05/06][RFC] OMAP4: PM: Adds CM1/2 register defs for OMAP4
  • From: Rajendra Nayak <rnayak@xxxxxx>
• [PATCH 06/06][RFC] OMAP4: PM: Adds CM1/2 register field masks
  • From: Rajendra Nayak <rnayak@xxxxxx>
• [PATCH 03/06][RFC] OMAP4: PM: Adds PRM register defs for OMAP4
  • From: Rajendra Nayak <rnayak@xxxxxx>
• [PATCH 02/06][RFC] OMAP4: PM: PRM/CM module offsets for OMAP4
  • From: Rajendra Nayak <rnayak@xxxxxx>
• [PATCH 01/06][RFC] OMAP4: PM: Fix the PRM and CM base addresses
  • From: Rajendra Nayak <rnayak@xxxxxx>
• [PATCH 00/06] [RFC] Basic OMAP4 PRCM register def series
  • From: "Nayak, Rajendra" <rnayak@xxxxxx>
• Re: DSS2: SYNC Lost error on mirroring enabled
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxxxxx>
• Re: Performance testing and identifying performance bottlenecks
  • From: Elvis Dowson <elvis.dowson@xxxxxxx>
• Re: [PATCH 02/06] OMAP3: PM: Add PER wakeup dependency on WKUP domain
  • From: jouni.hogander@xxxxxxxxx (Högander Jouni)
• DSS2: SYNC Lost error on mirroring enabled
  • From: "Venkatesh, Subbu" <subbu.wrs@xxxxxx>
• Re: [PATCH 05/10] ARM: OMAP1: Make 770 LCD work
  • From: Andrew de Quincey <adq_dvb@xxxxxxxxxxxxx>
• Re: [PATCH] OMAP3: PM: Add voltage levels to prm_setup_vc (previously prm_setup_time)
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 5/8] ARM: OMAP3: Add support for OMAP3 Zoom2 board, v2
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 5/8] ARM: OMAP3: Add support for OMAP3 Zoom2 board, v2
  • From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
• Re: [PATCH 7/8] ARM: OMAP3: Add omap3 EVM support, v2
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 5/8] ARM: OMAP3: Add support for OMAP3 Zoom2 board, v2
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 05/10] ARM: OMAP1: Make 770 LCD work, v3
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH] ARM: Move clk_add_alias() to arch/arm/common/clkdev.c (Re: [PATCH 05/10] ARM: OMAP1: Make 770 LCD work)
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 05/10] ARM: OMAP1: Make 770 LCD work
  • From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
• Re: [PATCH 05/10] ARM: OMAP1: Make 770 LCD work
  • From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
• Re: [PATCH 2/8] ARM: OMAP3: Initialize regulators for Beagle and Overo
  • From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
• Re: [PATCH 05/10] ARM: OMAP1: Make 770 LCD work, v2
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 05/10] ARM: OMAP1: Make 770 LCD work
  • From: Andrew de Quincey <adq_dvb@xxxxxxxxxxxxx>
• Re: [PATCH 02/13] OMAP2/3: PM: push core PM code from linux-omap
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 05/10] ARM: OMAP1: Make 770 LCD work
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 2/8] ARM: OMAP3: Initialize regulators for Beagle and Overo
  • From: Mark Brown <broonie@xxxxxxxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 2/8] ARM: OMAP3: Initialize regulators for Beagle and Overo
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 02/13] OMAP2/3: PM: push core PM code from linux-omap
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 2/8] ARM: OMAP3: Initialize regulators for Beagle and Overo
  • From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
• Re: [PATCH 7/8] ARM: OMAP3: Add omap3 EVM support
  • From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
• Re: [PATCH 5/8] ARM: OMAP3: Add support for OMAP3 Zoom2 board
  • From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
• Re: [PATCH 1/5] ARM: OMAP2/3: Remove OMAP2_32KSYNCT_BASE
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 02/13] OMAP2/3: PM: push core PM code from linux-omap
  • From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
• Re: [PATCH 0/5] More omap header clean-up for the merge window after 2.6.30
  • From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
• Re: [PATCH 1/5] ARM: OMAP2/3: Remove OMAP2_32KSYNCT_BASE
  • From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
• Re: Git pull request for omap patches for merge window after 2.6.30
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: Performance testing and identifying performance bottlenecks
  • From: "Hemanth V" <hemanthv@xxxxxx>
• Re: "Dummy" regulator possible?
  • From: Mark Brown <broonie@xxxxxxxxxxxxxxxxxxxxxxxxxxx>
• Performance testing and identifying performance bottlenecks
  • From: Elvis Dowson <elvis.dowson@xxxxxxx>
• Re: [PATCH 01/11] OMAP2/3: PM: push core PM code from linux-omap
  • From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
• Re: Git pull request for omap patches for merge window after 2.6.30
  • From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
• [PATCH 05/06] OMAP3: PM: Implement locking for any scratchpad access
  • From: Rajendra Nayak <rnayak@xxxxxx>
• [PATCH 04/06] OMAP3: PM: Put optimal SMPS stabilization delay
  • From: Rajendra Nayak <rnayak@xxxxxx>
• [PATCH 02/06] OMAP3: PM: Add PER wakeup dependency on WKUP domain
  • From: Rajendra Nayak <rnayak@xxxxxx>
• [PATCH 03/06] OMAP3: PM: VDD2 dvfs at higher VDD1 opp
  • From: Rajendra Nayak <rnayak@xxxxxx>
• [PATCH 01/06] OMAP3: PM: Update omap_3430sdp_pm_defconfig
  • From: Rajendra Nayak <rnayak@xxxxxx>
• [PATCH 06/06] OMAP3: PM: Update VDD1 OPP2 voltage level from 1.05 to 1.075
  • From: Rajendra Nayak <rnayak@xxxxxx>
• [PATCH 00/06] OMAP3430 Errata, defect fixes and optimizations
  • From: "Nayak, Rajendra" <rnayak@xxxxxx>
• "Dummy" regulator possible?
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxxxxx>
• Re: [PATCH] MFD: Add U300 AB3100 core support v1
  • From: Trilok Soni <soni.trilok@xxxxxxxxx>
• RE: [PATCH] OMAP3: Re-program also chipselect 1 when changing SDRAM timing
  • From: <Tero.Kristo@xxxxxxxxx>
• RE: linux-next: manual merge of the omap tree with the arm tree
  • From: "Shilimkar, Santosh" <santosh.shilimkar@xxxxxx>
• Re: linux-next: manual merge of the omap tree with the arm tree
  • From: Stephen Rothwell <sfr@xxxxxxxxxxxxxxxx>
• RE: linux-next: manual merge of the omap tree with the arm tree
  • From: "Shilimkar, Santosh" <santosh.shilimkar@xxxxxx>
• Re: [PATCH 1/4] ARM: OMAP4: SMP: Add OMAP4430 SMP board files
  • From: Santosh Shilimkar <santosh.shilimkar@xxxxxx>
• linux-next: manual merge of the omap tree with the arm tree
  • From: Stephen Rothwell <sfr@xxxxxxxxxxxxxxxx>
• RE: [PATCH 1/4] ARM: OMAP4: Add minimal support for omap4
  • From: "Shilimkar, Santosh" <santosh.shilimkar@xxxxxx>
• Git pull request for omap patches for merge window after 2.6.30
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 0/8] omap3 board updates for merge window after 2.6.30
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] OMAP1: PM: update and decouple from OMAP2/3 PM core
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 1/4] ARM: OMAP4: Add minimal support for omap4
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH] OMAP1: PM: update and decouple from OMAP2/3 PM core
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] ARM: OMAP3: pandora: add support for mode devices
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH] ARM: OMAP3: pandora: add support for mode devices
  • From: Grazvydas Ignotas <notasas@xxxxxxxxx>
• Re: Touchscreen getting stuck on resume or blanking briefly
  • From: Elvis Dowson <elvis.dowson@xxxxxxx>
• Touchscreen getting stuck on resume or blanking briefly
  • From: Elvis Dowson <elvis.dowson@xxxxxxx>
• Re: Gumstix Overo Low Power Standby?
  • From: Blazej Kot <bjk45@xxxxxxxxxxx>
• Re: Gumstix Overo Low Power Standby?
  • From: Dirk Behme <dirk.behme@xxxxxxxxxxxxxx>
• Re: Please help in adding ams-delta support to ASoC
  • From: Janusz Krzysztofik <jkrzyszt@xxxxxxxxxxxx>
• Re: [PATCH 0/4]ARM: OMAP4: SMP: Patch series
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH][RFC] OMAP4: McSPI Register Offset Changes For OMAP_4430SDP
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 1/8] ARM: OMAP3: mmc-twl4030 uses regulator framework, v2
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH][RFC] OMAP4: McSPI Register Offset Changes For OMAP_4430SDP
  • From: "Syed Rafiuddin" <rafiuddin.syed@xxxxxx>
• [PATCH 4/4] ARM: OMAP4: SMP: Update defconfig for OMAP4430
  • From: Santosh Shilimkar <santosh.shilimkar@xxxxxx>
• [PATCH 4/5] ARM: OMAP4: SMP: Update defconfig for OMAP4430
  • From: Santosh Shilimkar <santosh.shilimkar@xxxxxx>
• [PATCH 3/4] ARM: OMAP4: SMP: Enable SMP support for OMAP4430
  • From: Santosh Shilimkar <santosh.shilimkar@xxxxxx>
• [PATCH 1/4] ARM: OMAP4: SMP: Add OMAP4430 SMP board files
  • From: Santosh Shilimkar <santosh.shilimkar@xxxxxx>
• [PATCH 2/4] ARM: OMAP4: SMP: Add mpu timer support for OMAP4430
  • From: Santosh Shilimkar <santosh.shilimkar@xxxxxx>
• [PATCH 0/4]ARM: OMAP4: SMP: Patch series
  • From: "Shilimkar, Santosh" <santosh.shilimkar@xxxxxx>
• Re: [PATCH] OMAP3: Re-program also chipselect 1 when changing SDRAM timing
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• Re: how to configure android-2.6.27 kernel for an LCD display other than Zoom2 display
  • From: twebb <taliaferro62@xxxxxxxxx>
• Re: Please help in adding ams-delta support to ASoC
  • From: Jarkko Nikula <jhnikula@xxxxxxxxx>
• [PATCH 1/2] I2C: OMAP2/3: Fix scll/sclh calculations
  • From: Aaro Koskinen <aaro.koskinen@xxxxxxxxx>
• [PATCH 2/2] I2C: OMAP3: Better noise suppression for fast/standard modes
  • From: Aaro Koskinen <aaro.koskinen@xxxxxxxxx>
• Re: Please help in adding ams-delta support to ASoC
  • From: Janusz Krzysztofik <jkrzyszt@xxxxxxxxxxxx>
• Re: Please help in adding ams-delta support to ASoC
  • From: Janusz Krzysztofik <jkrzyszt@xxxxxxxxxxxx>
• [PATCH] OMAP3: Re-program also chipselect 1 when changing SDRAM timing
  • From: Tero Kristo <tero.kristo@xxxxxxxxx>
• Re: USB Host on OMAP3 EVM, 2.6.29
  • From: Niilo Minkkinen <ext-niilo.1.minkkinen@xxxxxxxxx>
• Re: Please help in adding ams-delta support to ASoC
  • From: Jarkko Nikula <jhnikula@xxxxxxxxx>
• Re: Please help in adding ams-delta support to ASoC
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxxxxx>
• USB Host on OMAP3 EVM, 2.6.29
  • From: Eino-Ville Talvala <talvala@xxxxxxxxxxxx>
• Re: [PATCH 0/6] Updates for omap3 for merge window after 2.6.30
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 00/10] Omap updates for merge window after 2.6.30
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH v2 00/13] OMAP2/3: PM sync-up
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Please advise on choosing the right backlight switching framework
  • From: Janusz Krzysztofik <jkrzyszt@xxxxxxxxxxxx>
• [PATCH 06/10] OMAP3 SRAM: convert SRAM code to use macros rather than magic numbers
  • From: Paul Walmsley <paul@xxxxxxxxx>
• [PATCH 09/10] OMAP3 clock: GPIO de-bounce clocks don't affect module idle state
  • From: Paul Walmsley <paul@xxxxxxxxx>
• [PATCH 10/10] OMAP2 clock/powerdomain: off by 1 error in loop timeout comparisons
  • From: Paul Walmsley <paul@xxxxxxxxx>
• [PATCH 07/10] OMAP3: Add support for DPLL3 divisor values higher than 2
  • From: Paul Walmsley <paul@xxxxxxxxx>
• [PATCH 08/10] OMAP3 SDRC: set FIXEDDELAY when disabling SDRC DLL
  • From: Paul Walmsley <paul@xxxxxxxxx>
• [PATCH 05/10] OMAP3 SRAM: add more comments on the SRAM code
  • From: Paul Walmsley <paul@xxxxxxxxx>
• [PATCH 04/10] OMAP3 clock/SDRC: program SDRC_MR register during SDRC clock change
  • From: Paul Walmsley <paul@xxxxxxxxx>
• [PATCH 03/10] OMAP3 clock: add a short delay when lowering CORE clk rate
  • From: Paul Walmsley <paul@xxxxxxxxx>
• [PATCH 02/10] OMAP3 clock: initialize SDRC timings at kernel start
  • From: Paul Walmsley <paul@xxxxxxxxx>
• [PATCH 01/10] OMAP3 clock: remove wait for DPLL3 M2 clock to stabilize
  • From: Paul Walmsley <paul@xxxxxxxxx>
• [PATCH 00/10] OMAP clock/powerdomain/SDRC patches for post-2.6.30
  • From: Paul Walmsley <paul@xxxxxxxxx>
• Re: [PATCH 00/10] OMAP clock/SDRC patches on v2.6.30-rc5
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: Gumstix Overo Low Power Standby?
  • From: Blazej Kot <bjk45@xxxxxxxxxxx>
• [RFC][PATCH] Add support for hook switch on ams-delta
  • From: Janusz Krzysztofik <jkrzyszt@xxxxxxxxxxxx>
• Re: [PATCH 00/10] OMAP clock/SDRC patches on v2.6.30-rc5
  • From: Paul Walmsley <paul@xxxxxxxxx>
• Re: [PATCH 00/10] OMAP clock/SDRC patches on v2.6.30-rc5
  • From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
• Re: [PATCH 00/10] OMAP clock/SDRC patches on v2.6.30-rc5
  • From: Paul Walmsley <paul@xxxxxxxxx>
• Re: [PATCH 1/2] McSPI Slave and DMA,FIFO support
  • From: "Hemanth V" <hemanthv@xxxxxx>
• [RFC][PATCH] OMAP3: add support for 2 SDRAM chip selects (was: Re: Beagleboard rev C memory timings & suspend/resume)
  • From: Jean Pihet <jpihet@xxxxxxxxxx>
• Please help in adding ams-delta support to ASoC
  • From: Janusz Krzysztofik <jkrzyszt@xxxxxxxxxxxx>
• Re: [PATCH 1/8] ARM: OMAP3: mmc-twl4030 uses regulator framework
  • From: Mark Brown <broonie@xxxxxxxxxxxxxxxxxxxxxxxxxxx>
• [linux-omap-pm] some test results
  • From: Abraham Arce <abraham.arce.moreno@xxxxxxxxx>
• RE: [PATCH 07/10] ARM: OMAP2/3: sDMA: Correct omap_request_dma_chain(), v2
  • From: "Shilimkar, Santosh" <santosh.shilimkar@xxxxxx>
• Patch: Init/shutdown correctness fixes for drivers/cbus/tahvo*
  • From: Andrew de Quincey <adq_dvb@xxxxxxxxxxxxx>
• Patch: Init/shutdown correctness fixes for drivers/cbus/retu*
  • From: Andrew de Quincey <adq@xxxxxxxxxxxxx>
• Re: [PATCH 1/8] ARM: OMAP3: mmc-twl4030 uses regulator framework
  • From: Daniel Ribeiro <drwyrm@xxxxxxxxx>
• [PATCH 8/8] ARM: OMAP3: Add omap3 EVM defconfig
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 7/8] ARM: OMAP3: Add omap3 EVM support
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 6/8] ARM: OMAP3: Defconfig for Zoom2 board
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 5/8] ARM: OMAP3: Add support for OMAP3 Zoom2 board
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 4/8] ARM: OMAP3: RX51: Connect VAUX3 to MMC2
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 3/8] ARM: OMAP3: pandora: setup regulator framework for MMC
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 2/8] ARM: OMAP3: Initialize regulators for Beagle and Overo
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 1/8] ARM: OMAP3: mmc-twl4030 uses regulator framework
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 0/8] omap3 board updates for merge window after 2.6.30
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 11/10] ARM: OMAP: Add some entries to MAINTAINERS
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 09/10] ARM: OMAP2/3: Add generic smc91x support when connected to GPMC, v2
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 08/10] ARM: OMAP2/3: Add generic onenand support when connected to GPMC, v2
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 05/10] ARM: OMAP1: Make 770 LCD work
  • From: Andrew de Quincey <adq_dvb@xxxxxxxxxxxxx>
• Re: [PATCH 07/10] ARM: OMAP2/3: sDMA: Correct omap_request_dma_chain(), v2
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 03/10] ARM: OMAP: Update contact address of I2C registration helper
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• RE: [PATCH 2/4] ARM: OMAP4: Clock stubs since CLKDEV not in yet.
  • From: "Shilimkar, Santosh" <santosh.shilimkar@xxxxxx>
• Re: [PATCH 05/10] ARM: OMAP1: Make 770 LCD work
  • From: Andrew de Quincey <adq_dvb@xxxxxxxxxxxxx>
• Re: [PATCH 6/6] ARM: OMAP3: Initialize more devices for LDP
  • From: Mark Brown <broonie@xxxxxxxxxxxxxxxxxxxxxxxxxxx>
• Re: [RESUBMIT][PATCH 6/7 v2] OMAP4: Clock stubs since clock management framework not in.
  • From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
• Re: [PATCH 6/6] ARM: OMAP3: Initialize more devices for LDP
  • From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
• Re: [PATCH 03/10] ARM: OMAP: Update contact address of I2C registration helper
  • From: Jarkko Nikula <jhnikula@xxxxxxxxx>
• Re: [PATCH 1/7] omap iommu: tlb and pagetable primitives
  • From: Hiroshi DOYU <Hiroshi.DOYU@xxxxxxxxx>
• Re: [PATCH 09/10] ARM: OMAP2/3: Add generic smc91x support when connected to GPMC
  • From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
• Re: [PATCH 08/10] ARM: OMAP2/3: Add generic onenand support when connected to GPMC
  • From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
• RE: [PATCH 07/10] ARM: OMAP2/3: sDMA: Correct omap_request_dma_chain()
  • From: "Shilimkar, Santosh" <santosh.shilimkar@xxxxxx>
• Re: [PATCH 1/7] omap iommu: tlb and pagetable primitives
  • From: Felipe Contreras <felipe.contreras@xxxxxxxxx>
• Re: [PATCH 07/10] ARM: OMAP2/3: sDMA: Correct omap_request_dma_chain()
  • From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
• Re: [PATCH 1/7] omap iommu: tlb and pagetable primitives
  • From: Hiroshi DOYU <Hiroshi.DOYU@xxxxxxxxx>
• Re: [PATCH 05/10] ARM: OMAP1: Make 770 LCD work
  • From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
• Re: [PATCH 03/10] ARM: OMAP: Update contact address of I2C registration helper
  • From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
• Re: [PATCH 1/7] omap iommu: tlb and pagetable primitives
  • From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
• Re: [PATCH][RFC] OMAP4: GPIO Support for OMAP_4430SDP
  • From: "Hemanth V" <hemanthv@xxxxxx>
• Re: [PATCH 1/7] omap iommu: tlb and pagetable primitives
  • From: Hiroshi DOYU <Hiroshi.DOYU@xxxxxxxxx>
• Re: [PATCH 01/13] Revert "ARM: OMAP: Mask interrupts when disabling interrupts, v2"
  • From: Kim Kyuwon <chammoru@xxxxxxxxx>
• Re: [PATCH 1/7] omap iommu: tlb and pagetable primitives
  • From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
• Re: n810 internal mmc boot
  • From: Jarkko Nikula <jhnikula@xxxxxxxxx>
• Question about MMC cover detection
  • From: Andrew de Quincey <adq_dvb@xxxxxxxxxxxxx>
• Patch: Fix N770 brf6150 bluetooth driver
  • From: Andrew de Quincey <adq_dvb@xxxxxxxxxxxxx>
• Patch: Fix N770 MMC support
  • From: Andrew de Quincey <adq_dvb@xxxxxxxxxxxxx>
• Re: [PATCH] Select TWL4030_CORE for boards which need twl4030_i2c_* functions.
  • From: Ihar Hrachyshka <ihar.hrachyshka@xxxxxxxxx>
• [PATCH] Select TWL4030_CORE for boards which need twl4030_i2c_* functions.
  • From: Ihar Hrachyshka <ihar.hrachyshka@xxxxxxxxx>
• [PATCH] Select PWL4030_CORE for boards which need twl4030_i2c_* functions.
  • From: Ihar Hrachyshka <ihar.hrachyshka@xxxxxxxxx>
• [PATCH] Select PWL4030_CORE for boards which need twl4030_i2c_* functions.
  • From: Ihar Hrachyshka <ihar.hrachyshka@xxxxxxxxx>
• I2C1 controller timed out with twl4030-powerbutton
  • From: pramod gurav <pramodforum@xxxxxxxxx>
• Re: Tracking N770 breakage
  • From: Andrew de Quincey <adq_dvb@xxxxxxxxxxxxx>
• Re: [PATCH] [RFC] OMAP4: sDMA: Update the request lines and new registers.
  • From: Venkatraman S <svenkatr@xxxxxx>
• Re: Tracking N770 breakage
  • From: Andrew de Quincey <adq_dvb@xxxxxxxxxxxxx>
• [PATCH][RFC] OMAP4: GPIO Support for OMAP_4430SDP
  • From: "Syed Rafiuddin" <rafiuddin.syed@xxxxxx>
• Re: Tracking N770 breakage
  • From: Andrew de Quincey <adq@xxxxxxxxxxxxx>
• Re: Tracking N770 breakage
  • From: Andrew de Quincey <adq_dvb@xxxxxxxxxxxxx>
• [RESUBMIT] [PATCH 2/2][RFC] OMAP4: UART4 Support for OMAP_4430SDP
  • From: "Syed Rafiuddin" <rafiuddin.syed@xxxxxx>
• [RESUBMIT][PATCH 1/2 ][RFC] OMAP4: McBSP support for OMAP_4430SDP
  • From: "Syed Rafiuddin" <rafiuddin.syed@xxxxxx>
• Re: Status of clock patches after mainline reset? Case: Beagle C2 and EHCI
  • From: Paul Walmsley <paul@xxxxxxxxx>
• Re: n810 internal mmc boot
  • From: green <greenfreedom10@xxxxxxxxx>
• Re: N810: latest linux-omap-2.6.git master
  • From: green <greenfreedom10@xxxxxxxxx>
• Re: [PATCH 3/6] ARM: OMAP3: SDRC: add timing data for Micron MT46H32M32LF-6, v2
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [APPLIED] [PATCH] OMAP3 SDRC: Drop 133.3MHz, 66.6MHz rates from Micron SDRAM
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH] OMAP3 SDRC: Drop 133.3MHz, 66.6MHz rates from Micron SDRAM params file
  • From: Paul Walmsley <paul@xxxxxxxxx>
• Re: Tracking N770 breakage
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: Tracking N770 breakage
  • From: Andrew de Quincey <adq@xxxxxxxxxxxxx>
• Re: [PATCH 01/13] Revert "ARM: OMAP: Mask interrupts when disabling interrupts, v2"
  • From: Kim Kyuwon <chammoru@xxxxxxxxx>
• Re: [PATCH 1/7] omap iommu: tlb and pagetable primitives
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 01/13] Revert "ARM: OMAP: Mask interrupts when disabling interrupts, v2"
  • From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
• Re: [PATCH 01/13] Revert "ARM: OMAP: Mask interrupts when disabling interrupts, v2"
  • From: Kim Kyuwon <chammoru@xxxxxxxxx>
• [PATCH 6/6] ARM: OMAP3: Initialize more devices for LDP
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 5/6] ARM: OMAP3: ZOOM MDK: Add FB support to board file
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [RFC] Allow disabling wakeup for serial ports, including during off mode.
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• [PATCH 4/6] ARM: OMAP3: SDRC: add timing data for Qimonda HYB18M512160AF-6
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 3/6] ARM: OMAP3: SDRC: add timing data for Micron MT46H32M32LF-6
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 2/6] ARM: OMAP2/3: Serial: Remove arch_initcall dependency
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 1/6] ARM: OMAP2/3: Remove L4_WK_OMAP_BASE, L4_PER_OMAP_BASE, L4_EMU_BASE, L3_OMAP_BASE
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 0/6] Updates for omap3 for merge window after 2.6.30
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: Tracking N770 breakage
  • From: Andrew de Quincey <adq_dvb@xxxxxxxxxxxxx>
• Re: Tracking N770 breakage
  • From: Andrew de Quincey <adq@xxxxxxxxxxxxx>
• Re: [PATCH 01/13] Revert "ARM: OMAP: Mask interrupts when disabling interrupts, v2"
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• Re: Tracking N770 breakage
  • From: Andrew de Quincey <adq_dvb@xxxxxxxxxxxxx>
• Re: [PATCH 01/13] Revert "ARM: OMAP: Mask interrupts when disabling interrupts, v2"
  • From: Kim Kyuwon <chammoru@xxxxxxxxx>
• Re: [PATCH 01/13] Revert "ARM: OMAP: Mask interrupts when disabling interrupts, v2"
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• RE: [PATCH] OMAP: HSMMC: Do not enable buffer ready interrupt if using DMA
  • From: "Gadiyar, Anand" <gadiyar@xxxxxx>
• Re: [PATCH 2/2] McSPI Slave and DMA,FIFO support
  • From: "Hemanth V" <hemanthv@xxxxxx>
• [PATCH] OMAP3: PM: Fix VDD2 OPP determining logic
  • From: Roger Quadros <ext-roger.quadros@xxxxxxxxx>
• Re: [PATCH 9/9] omap mmc host: Use disable_irq_nosync() from within irq handlers.
  • From: Pierre Ossman <pierre@xxxxxxxxx>
• Re: [PATCH 1/7] omap iommu: tlb and pagetable primitives
  • From: Hiroshi DOYU <Hiroshi.DOYU@xxxxxxxxx>
• [PATCH] OMAP3: PM: Add voltage levels to prm_setup_vc (previously prm_setup_time)
  • From: Mike Chan <mike@xxxxxxxxxxx>
• Re: [PATCH] OMAP3: PM: SDRC: ensure mux of SDRC clock enable pins for self-refresh
  • From: Paul Walmsley <paul@xxxxxxxxx>
• Re: [PATCH 01/13] Revert "ARM: OMAP: Mask interrupts when disabling interrupts, v2"
  • From: Kim Kyuwon <q1.kim@xxxxxxxxxxx>
• Re: [PATCH] OMAP3: PM: SDRC: ensure mux of SDRC clock enable pins for self-refresh
  • From: Mike Chan <mikechan@xxxxxxxxxx>
• Re: [PATCH] OMAP3: PM: SDRC: ensure mux of SDRC clock enable pins for self-refresh
  • From: Paul Walmsley <paul@xxxxxxxxx>
• RE: Kernel panic on ldp board
  • From: "Hald, Ulrik Bech" <ubh@xxxxxx>
• Re: Kernel panic on ldp board
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• RE: Kernel panic on ldp board
  • From: "Hald, Ulrik Bech" <ubh@xxxxxx>
• RE: [PATCH] DSPBRIDGE: Removal of unreachable code
  • From: "Guzman Lugo, Fernando" <x0095840@xxxxxx>
• FW: [PATCH] DSPBRIDGE: Buffer size warning fixes
  • From: "Guzman Lugo, Fernando" <x0095840@xxxxxx>
• [APPLIED] [PATCH v4 2/3] OMAP3:zoom2: Defconfig for Zoom2 board
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [APPLIED] [PATCH v4 1/3] OMAP3:zoom2: Add support for OMAP3 Zoom2 board
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [APPLIED] [PATCH] OMAP2: Serial: Remove arch_initcall dependency
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 08/11] ARM: OMAP2/3: GPIO: do not attempt to wake-enable
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 2/2] McSPI Slave and DMA,FIFO support
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 2/2] McSPI Slave and DMA,FIFO support
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• Re: Kernel panic on ldp board
  • From: Gary Thomas <gary@xxxxxxxxxxxx>
• Re: [PATCH 2/2] McSPI Slave and DMA,FIFO support
  • From: "Hemanth V" <hemanthv@xxxxxx>
• RE: [PATCH] OMAP: clock: export notifier register functions
  • From: "Gupta, Ramesh" <grgupta@xxxxxx>
• [PATCH] OMAP: clock: export notifier register functions
  • From: Omar Ramirez Luna <x00omar@xxxxxx>
• RE: [PATCH 1/4] ARM: OMAP4: Add minimal support for omap4
  • From: "Shilimkar, Santosh" <santosh.shilimkar@xxxxxx>
• [PATCH v4 3/3] OMAP3:zoom2: Makefile and Kconfig for Zoom2 board
  • From: "Pandita, Vikram" <vikram.pandita@xxxxxx>
• [PATCH v4 2/3] OMAP3:zoom2: Defconfig for Zoom2 board
  • From: "Pandita, Vikram" <vikram.pandita@xxxxxx>
• [PATCH v4 1/3] OMAP3:zoom2: Add support for OMAP3 Zoom2 board
  • From: "Pandita, Vikram" <vikram.pandita@xxxxxx>
• [PATCH v4 0/3]Add Zoom2 board support
  • From: "Pandita, Vikram" <vikram.pandita@xxxxxx>
• [PATCH] OMAP2: Serial: Remove arch_initcall dependency
  • From: "Pandita, Vikram" <vikram.pandita@xxxxxx>
• [PATCH 06/13] OMAP3: PM: UART: disable clocks when idle and off-mode support
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• [PATCH 08/13] OMAP3: PM: Add D2D clocks and auto-idle setup to PRCM init
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• [PATCH 04/13] OMAP3: PM: Force IVA2 into idle during bootup
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• [PATCH 13/13] OMAP3: PM: prevent module wakeups from waking IVA2
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• [PATCH 12/13] OMAP3: PM: Clear pending PRCM reset flags on init
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• [PATCH 11/13] OMAP3: PM: Ensure PRCM interrupts are cleared at boot
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• [PATCH 10/13] OMAP3: PM: Ensure MUSB block can idle when driver not loaded
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• [PATCH 09/13] OMAP3: PM: D2D clockdomain supports SW supervised transitions
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• [PATCH 07/13] OMAP: UART: Add sysfs interface for adjusting UART sleep timeout
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• [PATCH 05/13] OMAP3: PM: Add wake-up bit defintiions for CONTROL_PADCONF_X
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• [PATCH 03/13] OMAP: Add new function to check wether there is irq pending
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• [PATCH 02/13] OMAP2/3: PM: push core PM code from linux-omap
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• [PATCH 01/13] Revert "ARM: OMAP: Mask interrupts when disabling interrupts, v2"
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• [PATCH v2 00/13] OMAP2/3: PM sync-up
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• Re: N810: latest linux-omap-2.6.git master
  • From: Max Filippov <jcmvbkbc@xxxxxxxxx>
• Re: N810: latest linux-omap-2.6.git master
  • From: Max Filippov <jcmvbkbc@xxxxxxxxx>
• RE: [PATCH v3 1/3] OMAP3:zoom2: Add support for OMAP3 Zoom2 board
  • From: "Pandita, Vikram" <vikram.pandita@xxxxxx>
• Re: [PATCH v3 1/3] OMAP3:zoom2: Add support for OMAP3 Zoom2 board
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: N810: latest linux-omap-2.6.git master
  • From: Kalle Valo <kalle.valo@xxxxxx>
• Re: N810: latest linux-omap-2.6.git master
  • From: Jarkko Nikula <jhnikula@xxxxxxxxx>
• Re: Gumstix Overo Low Power Standby?
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 2/2] McSPI Slave and DMA,FIFO support
  • From: Philip Balister <philip@xxxxxxxxxxxx>
• Re: Gumstix Overo Low Power Standby?
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 2/2] McSPI Slave and DMA,FIFO support
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] OMAP3: PM: remove save/restore of exception handler state
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 0/2] PM: drop clocks_off_while_idle
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 2/2] McSPI Slave and DMA,FIFO support
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH] OMAP3: PM: SDRC: ensure mux of SDRC clock enable pins for self-refresh
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• [PATCH] DSPBRIDGE: slab corruption in resource cleanup fix
  • From: "Guzman Lugo, Fernando" <x0095840@xxxxxx>
• Re: [PATCH 1/4] ARM: OMAP4: Add minimal support for omap4
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 2/7] OMAP4: Create board support for OMAP_4430SDP, v3
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: Tracking N770 breakage
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Gumstix Overo Low Power Standby?
  • From: Blazej Kot <bjk45@xxxxxxxxxxx>
• Re: N810: latest linux-omap-2.6.git master
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• RE: [PATCH 01/14] DSPBRIDGE: Remove SEEK_* redefinitions
  • From: "Ramirez Luna, Omar" <omar.ramirez@xxxxxx>
• Re: [PATCH] OMAP: PM: Clear DMA channel state after a wakeup
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• Re: N810: latest linux-omap-2.6.git master
  • From: Kalle Valo <kalle.valo@xxxxxx>
• Re: [PATCH] OMAP3: PM: Smartreflex: Fix VDD2 OPP determining logic
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• [PATCH] OMAP: PM: Clear DMA channel state after a wakeup
  • From: Aaro Koskinen <aaro.koskinen@xxxxxxxxx>
• Re: [PATCH 01/14] DSPBRIDGE: Remove SEEK_* redefinitions
  • From: Felipe Contreras <felipe.contreras@xxxxxxxxx>
• Re: [PATCH 5/7] omap iommu: entries for Kconfig and Makefile
  • From: Felipe Contreras <felipe.contreras@xxxxxxxxx>
• [PATCH 1/4] ARM: OMAP4: Add minimal support for omap4
  • From: Santosh Shilimkar <santosh.shilimkar@xxxxxx>
• [PATCH 4/4] ARM: OMAP4: Add defconfig for 4430 SDP
  • From: Santosh Shilimkar <santosh.shilimkar@xxxxxx>
• [PATCH 2/4] ARM: OMAP4: Clock stubs since CLKDEV not in yet.
  • From: Santosh Shilimkar <santosh.shilimkar@xxxxxx>
• [PATCH 3/4] ARM: OMAP4: Add support for 4430 SDP
  • From: Santosh Shilimkar <santosh.shilimkar@xxxxxx>
• [PATCH 0/4] ARM: OMPA4: Basic boot patch series based on linux-omap
  • From: "Shilimkar, Santosh" <santosh.shilimkar@xxxxxx>
• [PATCH] OMAP3: PM: Smartreflex: Fix VDD2 OPP determining logic
  • From: Roger Quadros <ext-roger.quadros@xxxxxxxxx>
• Re: [ANNOUNCE] Temporary L-B tree for bridge 2.6.29
  • From: Hiroshi DOYU <Hiroshi.DOYU@xxxxxxxxx>
• Re: OpenGL flicker issue in Android
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxxxxx>
• RE: [ANNOUNCE] Temporary L-B tree for bridge 2.6.29
  • From: "Menon, Nishanth" <nm@xxxxxx>
• OpenGL flicker issue in Android
  • From: Elvis Dowson <elvis.dowson@xxxxxxx>
• RE: [ANNOUNCE] Temporary L-B tree for bridge 2.6.29
  • From: "Kanigeri, Hari" <h-kanigeri2@xxxxxx>
• DSS SDI, DSI, FAKE VSYNC
  • From: Elvis Dowson <elvis.dowson@xxxxxxx>
• Re: [PATCH 1/7] omap iommu: tlb and pagetable primitives
  • From: Hiroshi DOYU <Hiroshi.DOYU@xxxxxxxxx>
• What is the use of CONFIG_FB_VIRTUAL?
  • From: Elvis Dowson <elvis.dowson@xxxxxxx>
• DSS2: What is the impact of CONFIG_FB_OMAP2_NUM_FBS
  • From: Elvis Dowson <elvis.dowson@xxxxxxx>
• Re: Impact of SR reflex or pm patches on the ADS7846 touchscreen controller
  • From: Elvis Dowson <elvis.dowson@xxxxxxx>
• Re: Impact of SR reflex or pm patches on the ADS7846 touchscreen controller
  • From: Koen Kooi <k.kooi@xxxxxxxxxxxxxxxxxx>
• [PATCH 7/7] omap iommu: add MPU_BRIDGE_IOMMU for tidspbridge migration
  • From: Hiroshi DOYU <Hiroshi.DOYU@xxxxxxxxx>
• [PATCH 4/7] omap iommu: simple virtual address space management
  • From: Hiroshi DOYU <Hiroshi.DOYU@xxxxxxxxx>
• [PATCH 6/7] omap2 iommu: entries for Kconfig and Makefile
  • From: Hiroshi DOYU <Hiroshi.DOYU@xxxxxxxxx>
• [PATCH 1/7] omap iommu: tlb and pagetable primitives
  • From: Hiroshi DOYU <Hiroshi.DOYU@xxxxxxxxx>
• [PATCH 5/7] omap iommu: entries for Kconfig and Makefile
  • From: Hiroshi DOYU <Hiroshi.DOYU@xxxxxxxxx>
• [PATCH 2/7] omap iommu: omap2 architecture specific functions
  • From: Hiroshi DOYU <Hiroshi.DOYU@xxxxxxxxx>
• [PATCH 3/7] omap iommu: omap3 iommu device registration
  • From: Hiroshi DOYU <Hiroshi.DOYU@xxxxxxxxx>
• RE: [PATCH 2/2] McSPI Slave and DMA,FIFO support
  • From: "Shilimkar, Santosh" <santosh.shilimkar@xxxxxx>
• RE: [PATCH 2/2] McSPI Slave and DMA,FIFO support
  • From: "Gadiyar, Anand" <gadiyar@xxxxxx>
• Re: [PATCH 1/2] McSPI Slave and DMA,FIFO support
  • From: "Hemanth V" <hemanthv@xxxxxx>
• RE: [PATCH 1/2] McSPI Slave and DMA,FIFO support
  • From: "Shilimkar, Santosh" <santosh.shilimkar@xxxxxx>
• [PATCH 2/2] McSPI Slave and DMA,FIFO support
  • From: "Hemanth V" <hemanthv@xxxxxx>
• [PATCH 1/2] McSPI Slave and DMA,FIFO support
  • From: "Hemanth V" <hemanthv@xxxxxx>
• [PATCH 0/2] McSPI Slave and DMA,FIFO support
  • From: "Hemanth V" <hemanthv@xxxxxx>
• Re: Impact of SR reflex or pm patches on the ADS7846 touchscreen controller
  • From: Elvis Dowson <elvis.dowson@xxxxxxx>
• RE: [ANNOUNCE] Temporary L-B tree for bridge 2.6.29
  • From: "Menon, Nishanth" <nm@xxxxxx>
• Re: Tracking N770 breakage
  • From: Andrew de Quincey <adq_dvb@xxxxxxxxxxxxx>
• [PATCH 09/14] DSPBRIDGE: Fixing indentation
  • From: Omar Ramirez Luna <x00omar@xxxxxx>
• [PATCH 13/14] DSPBRIDGE: Stop and reset DSP before removing constraints
  • From: Omar Ramirez Luna <x00omar@xxxxxx>
• [PATCH 11/14] DSPBRIDGE: New PWRERROR event notification
  • From: Omar Ramirez Luna <x00omar@xxxxxx>
• [PATCH 12/14] DSPBRIDGE: Remove all resources on driver exit
  • From: Omar Ramirez Luna <x00omar@xxxxxx>
• [PATCH 08/14] DSPBRIDGE: trivial spacing cleanup for memory module
  • From: Omar Ramirez Luna <x00omar@xxxxxx>
• [PATCH 04/14] DSPBRIDGE: Fixed typo in debug traces
  • From: Omar Ramirez Luna <x00omar@xxxxxx>
• [PATCH 10/14] BRIDGE: Number of supported OPPs increased to 5
  • From: Omar Ramirez Luna <x00omar@xxxxxx>
• [PATCH 05/14] DSPBRIDGE: Change address resources to void __iomem *
  • From: Omar Ramirez Luna <x00omar@xxxxxx>
• [PATCH 02/14] DSPBRIDGE: Removes wrappers funtions of readl and writel
  • From: Omar Ramirez Luna <x00omar@xxxxxx>
• [PATCH 06/14] DSPBRIDGE: Remove variables not used in cfgdefs.h
  • From: Omar Ramirez Luna <x00omar@xxxxxx>
• [PATCH 14/14] DSPBRIDGE: Remove run_IdleBoot support
  • From: Omar Ramirez Luna <x00omar@xxxxxx>
• [PATCH 07/14] DSPBRIDGE: base image reload suppor after DSP error
  • From: Omar Ramirez Luna <x00omar@xxxxxx>
• [PATCH 01/14] DSPBRIDGE: Remove SEEK_* redefinitions
  • From: Omar Ramirez Luna <x00omar@xxxxxx>
• [PATCH 03/14] DSPBRIDGE: Fixed Double notification when a sys_error happens
  • From: Omar Ramirez Luna <x00omar@xxxxxx>
• RE: [PATCH 2/7] OMAP4: Create board support for OMAP_4430SDP, v3
  • From: "Shilimkar, Santosh" <santosh.shilimkar@xxxxxx>
• [ANNOUNCE] Temporary L-B tree for bridge 2.6.29
  • From: "Ramirez Luna, Omar" <omar.ramirez@xxxxxx>
• Impact of SR reflex or pm patches on the ADS7846 touchscreen controller
  • From: Elvis Dowson <elvis.dowson@xxxxxxx>
• RE: [PATCH v3 1/3] OMAP3:zoom2: Add support for OMAP3 Zoom2 board
  • From: "Pandita, Vikram" <vikram.pandita@xxxxxx>
• RE: [PATCH v3 1/3] OMAP3:zoom2: Add support for OMAP3 Zoom2 board
  • From: "Pandita, Vikram" <vikram.pandita@xxxxxx>
• Re: [PATCH v3 1/3] OMAP3:zoom2: Add support for OMAP3 Zoom2 board
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• RE: [PATCH v3 1/3] OMAP3:zoom2: Add support for OMAP3 Zoom2 board
  • From: "Pandita, Vikram" <vikram.pandita@xxxxxx>
• [PATCH 10/10] ARM: OMAP2: 2430SDP: Add FB support to board file
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 09/10] ARM: OMAP2/3: Add generic smc91x support when connected to GPMC
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 08/10] ARM: OMAP2/3: Add generic onenand support when connected to GPMC
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 07/10] ARM: OMAP2/3: sDMA: Correct omap_request_dma_chain()
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 06/10] ARM: OMAP2/3: DMA: implement trans copy and const fill
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 05/10] ARM: OMAP1: Make 770 LCD work
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 04/10] ARM: OMAP1: Misc clean-up
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 03/10] ARM: OMAP: Update contact address of I2C registration helper
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 02/10] ARM: OMAP: McBSP: Fix legacy interrupts to clear their status
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 01/10] ARM: OMAP: Increase VMALLOC_END to allow 256MB RAM
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 00/10] Omap updates for merge window after 2.6.30
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: Doesn't power management switch off the LCD's LED backlight?
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• Re: Tracking N770 breakage
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 0/2] PM: drop clocks_off_while_idle
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• RE: [PATCH 0/2] PM: drop clocks_off_while_idle
  • From: "Woodruff, Richard" <r-woodruff2@xxxxxx>
• [PATCH] ARM: OMAP2/3: Remove unused L4_WK_OMAP_BASE, L4_PER_OMAP_BASE, L4_EMU_BASE, L3_OMAP_BASE (Re: [PATCH 2/7] OMAP4: Create board support for OMAP_4430SDP, v3)
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 4/7] OMAP4: Update common omap platform common sources, v3
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [RESUBMIT][PATCH 3/7 v2] OMAP4: Update common omap platform headers.
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 2/7] OMAP4: Create board support for OMAP_4430SDP, v3
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] OMAP_LDP: Support LCD display as a FB device on ZOOM MDK (Re: LDP support)
  • From: Jon Hunter <jon-hunter@xxxxxx>
• Re: SR1 / SR2 VDD autocomp is not active error & cannot suspend due to USB
  • From: Elvis Dowson <elvis.dowson@xxxxxxx>
• Re: Smart Reflex pm patches causes a kernel panic
  • From: Elvis Dowson <elvis.dowson@xxxxxxx>
• Re: Smart Reflex pm patches causes a kernel panic
  • From: Koen Kooi <k.kooi@xxxxxxxxxxxxxxxxxx>
• Doesn't power management switch off the LCD's LED backlight?
  • From: Elvis Dowson <elvis.dowson@xxxxxxx>
• SR1 / SR2 VDD autocomp is not active error & cannot suspend due to USB
  • From: Elvis Dowson <elvis.dowson@xxxxxxx>
• Re: [PATCH 01/11] OMAP2/3: PM: push core PM code from linux-omap
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• Re: Smart Reflex pm patches causes a kernel panic
  • From: Elvis Dowson <elvis.dowson@xxxxxxx>
• Re: [PATCH 0/4] OMAP: Cleanup series.
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: Smart Reflex pm patches causes a kernel panic
  • From: Elvis Dowson <elvis.dowson@xxxxxxx>
• [PATCH] OMAP3: PM: remove save/restore of exception handler state
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 0/5] More omap header clean-up for the merge window after 2.6.30
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 2/2] OMAP2/3: PM: remove /sys/power/clocks_off_while_idle
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: N810: latest linux-omap-2.6.git master
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 2/2] OMAP2/3: PM: remove /sys/power/clocks_off_while_idle
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• [PATCH 1/2] OMAP: PM: UART: zero sleep_timeout will disable timeout feature
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• [PATCH 0/2] PM: drop clocks_off_while_idle
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] usb: disable OTG AUTOIDLE only with omap3430
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] OMAP3: PM: Do not Enable SmartReflex if OPP tables not defined
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] OMAP3: PM: Make Smartreflex driver independent of SRF
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v3 1/3] OMAP3:zoom2: Add support for OMAP3 Zoom2 board
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: Does SmartReflex pm patches affect USB suspend resume operations
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• Re: Does SmartReflex pm patches affect USB suspend resume operations
  • From: Elvis Dowson <elvis.dowson@xxxxxxx>
• Re: Does SmartReflex pm patches affect USB suspend resume operations
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• Kernel panic on ldp board
  • From: "Hald, Ulrik Bech" <ubh@xxxxxx>
• RE: slap corruption
  • From: "Guzman Lugo, Fernando" <x0095840@xxxxxx>
• Re: MMC card corruption during suspend/resume operation
  • From: Elvis Dowson <elvis.dowson@xxxxxxx>
• Re: [PATCH 01/11] OMAP2/3: PM: push core PM code from linux-omap
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• Re: MMC card corruption during suspend/resume operation
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• Re: Smart Reflex pm patches causes a kernel panic
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• Does SmartReflex pm patches affect USB suspend resume operations
  • From: Elvis Dowson <elvis.dowson@xxxxxxx>
• Re:[RESUBMIT][PATCH 7/7 v2] OMAP4: Enable build for OMAP4.
  • From: Santosh Shilimkar <santosh.shilimkar@xxxxxx>
• Re:[RESUBMIT][PATCH 6/7 v2] OMAP4: Clock stubs since clock management framework not in.
  • From: Santosh Shilimkar <santosh.shilimkar@xxxxxx>
• Re: [RESUBMIT][PATCH 5/7 v2] OMAP4: Update common omap machine specific sources.
  • From: Santosh Shilimkar <santosh.shilimkar@xxxxxx>
• Re: [RESUBMIT][PATCH 4/7 v2] OMAP4: Update common omap platform common sources.
  • From: Santosh Shilimkar <santosh.shilimkar@xxxxxx>
• Re: [RESUBMIT][PATCH 3/7 v2] OMAP4: Update common omap platform headers.
  • From: Santosh Shilimkar <santosh.shilimkar@xxxxxx>
• Re: [RESUBMIT][PATCH 2/7 v2] OMAP4: Create board support for OMAP_4430SDP.
  • From: Santosh Shilimkar <santosh.shilimkar@xxxxxx>
• [PATCH 4/4] ARM: OMAP: Remove unnecessary omap2_globals.
  • From: Santosh Shilimkar <santosh.shilimkar@xxxxxx>
• [PATCH 3/4] ARM: OMAP: Remove useless omap_sram_error function.
  • From: Santosh Shilimkar <santosh.shilimkar@xxxxxx>
• [PATCH 2/4] ARM: OMAP: Remove unwanted type casts and fix the compiler warning.
  • From: Santosh Shilimkar <santosh.shilimkar@xxxxxx>