Not enough coffee this morning! After a comment period I will resubmit these two patches with proper signed-off-by, etc. Steve On Sat, May 30, 2009 at 6:40 AM, Steve Sakoman <sakoman@xxxxxxxxx> wrote: > Though the comment in clocks_init claims to initialize the MADC > clocks, it wasn't actually being done. This patch implements minimal > MADC clock initialization. > > Compile/run tested on Overo (prior to patch MADC access would always timeout) > > diff --git a/drivers/mfd/twl4030-core.c b/drivers/mfd/twl4030-core.c > index 769b34b..c5ca36d 100644 > --- a/drivers/mfd/twl4030-core.c > +++ b/drivers/mfd/twl4030-core.c > @@ -159,6 +159,7 @@ > > /* Few power values */ > #define R_CFG_BOOT 0x05 > +#define R_GPBR1 0x0C > #define R_PROTECT_KEY 0x0E > > /* access control values for R_PROTECT_KEY */ > @@ -166,6 +167,10 @@ > #define KEY_UNLOCK2 0xec > #define KEY_LOCK 0x00 > > +/* MADC clock values for R_GPBR1 */ > +#define MADC_HFCLK_EN 0x80 > +#define DEFAULT_MADC_CLK_EN 0x10 > + > /* some fields in R_CFG_BOOT */ > #define HFCLK_FREQ_19p2_MHZ (1 << 0) > #define HFCLK_FREQ_26_MHZ (2 << 0) > @@ -717,6 +722,11 @@ static void __init clocks_init(struct device *dev) > ctrl |= HIGH_PERF_SQ; > e |= unprotect_pm_master(); > /* effect->MADC+USB ck en */ > + > + if (twl_has_madc()) > + e |= twl4030_i2c_write_u8(TWL4030_MODULE_INTBR, > + MADC_HFCLK_EN | DEFAULT_MADC_CLK_EN, R_GPBR1); > + > e |= twl4030_i2c_write_u8(TWL4030_MODULE_PM_MASTER, ctrl, R_CFG_BOOT); > e |= protect_pm_master(); > -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
