Hi Tomi, I managed to fix the Mirroring UNDERFLOW error on LDP board. It was pixel clock issue. I also emailed you patch supporting LDP DSS2, could you comment on it. Regards, Subbu ________________________________________ From: Tomi Valkeinen [tomi.valkeinen@xxxxxxxxx] Sent: Friday, May 29, 2009 7:20 AM To: Venkatesh, Subbu Cc: linux-omap@xxxxxxxxxxxxxxx; Shah, Hardik; Castaneda Gonzalez, Axel; Mande, Nikhil Subject: RE: DSS2: SYNC Lost error on mirroring enabled Hi, On Fri, 2009-05-29 at 14:06 +0200, ext Venkatesh, Subbu wrote: > Hello Tomi, > I have no problem with the Roatation using VRFB. > Curretnly the issue is with the Mirroring. Using VRFB for mirroring has no effect as I see in the omapfb-main.c, if Rotation type is VRFB, then mirror=0. So I cannot use mirroring at all. I meant that VRFB is used also for mirroring, and so you need VRFB. But true, VRFB mirroring is currently disabled, and doesn't seem to work. Tomi > > Regards, > Subbu > ________________________________________ > From: Tomi Valkeinen [tomi.valkeinen@xxxxxxxxx] > Sent: Friday, May 29, 2009 1:51 AM > To: Venkatesh, Subbu > Cc: linux-omap@xxxxxxxxxxxxxxx; Shah, Hardik; Castaneda Gonzalez, Axel; Mande, Nikhil > Subject: Re: DSS2: SYNC Lost error on mirroring enabled > > On Fri, 2009-05-29 at 03:32 +0200, ext Venkatesh, Subbu wrote: > > Hi, > > I am getting SYNC LOSTerror on OMAP development board ( LDP ), this happens when I enable mirroring by a command > > > > #echo 1 > /sys/class/graphics/fb0/mirror > > > > In brief, recently I ported board related funtions to support both LCD and TV displays on Omap LDP, mirroring works on TV but not LCD. Attached log gives more details. > > Any inputs are appreciated. > > You need to use VRFB rotation, DMA rotation is only meant for SRAM > framebuffers. > > Tomi > > > -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
