From: Paul Walmsley <paul@xxxxxxxxx> Add timing data for the Micron MT46H32M32LF-6 SDRAM chip, used on the OMAP3 Beagle and EVM boards. Original timing data is from the Micron datasheet PDF downloaded from: http://download.micron.com/pdf/datasheets/dram/mobile/1gb_ddr_mobile_sdram_t48m.pdf Thanks to Rajendra Nayak <rnayak@xxxxxx> for his help identifying the chips used on Beagle & OMAP3EVM. Signed-off-by: Paul Walmsley <paul@xxxxxxxxx> Signed-off-by: Tony Lindgren <tony@xxxxxxxxxxx> --- arch/arm/mach-omap2/board-omap3beagle.c | 4 + arch/arm/mach-omap2/board-omap3pandora.c | 3 + arch/arm/mach-omap2/board-overo.c | 3 + arch/arm/mach-omap2/sdram-micron-mt46h32m32lf-6.h | 69 +++++++++++++++++++++ 4 files changed, 76 insertions(+), 3 deletions(-) create mode 100644 arch/arm/mach-omap2/sdram-micron-mt46h32m32lf-6.h diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c index 3a7a29d..f25082c 100644 --- a/arch/arm/mach-omap2/board-omap3beagle.c +++ b/arch/arm/mach-omap2/board-omap3beagle.c @@ -105,6 +105,8 @@ static struct platform_device omap3beagle_nand_device = { .resource = &omap3beagle_nand_resource, }; +#include "sdram-micron-mt46h32m32lf-6.h" + static struct omap_uart_config omap3_beagle_uart_config __initdata = { .enabled_uarts = ((1 << 0) | (1 << 1) | (1 << 2)), }; @@ -185,7 +187,7 @@ static int __init omap3_beagle_i2c_init(void) static void __init omap3_beagle_init_irq(void) { - omap2_init_common_hw(NULL); + omap2_init_common_hw(mt46h32m32lf6_sdrc_params); omap_init_irq(); #ifdef CONFIG_OMAP_32K_TIMER omap2_gp_clockevent_set_gptimer(12); diff --git a/arch/arm/mach-omap2/board-omap3pandora.c b/arch/arm/mach-omap2/board-omap3pandora.c index 402f09c..3571bb4 100644 --- a/arch/arm/mach-omap2/board-omap3pandora.c +++ b/arch/arm/mach-omap2/board-omap3pandora.c @@ -36,6 +36,7 @@ #include <mach/mcspi.h> #include <mach/usb.h> +#include "sdram-micron-mt46h32m32lf-6.h" #include "mmc-twl4030.h" #define OMAP3_PANDORA_TS_GPIO 94 @@ -118,7 +119,7 @@ static int __init omap3pandora_i2c_init(void) static void __init omap3pandora_init_irq(void) { - omap2_init_common_hw(NULL); + omap2_init_common_hw(mt46h32m32lf6_sdrc_params); omap_init_irq(); omap_gpio_init(); } diff --git a/arch/arm/mach-omap2/board-overo.c b/arch/arm/mach-omap2/board-overo.c index b1f23be..c7443ff 100644 --- a/arch/arm/mach-omap2/board-overo.c +++ b/arch/arm/mach-omap2/board-overo.c @@ -45,6 +45,7 @@ #include <mach/nand.h> #include <mach/usb.h> +#include "sdram-micron-mt46h32m32lf-6.h" #include "mmc-twl4030.h" #define OVERO_GPIO_BT_XGATE 15 @@ -303,7 +304,7 @@ static int __init overo_i2c_init(void) static void __init overo_init_irq(void) { - omap2_init_common_hw(NULL); + omap2_init_common_hw(mt46h32m32lf6_sdrc_params); omap_init_irq(); omap_gpio_init(); } diff --git a/arch/arm/mach-omap2/sdram-micron-mt46h32m32lf-6.h b/arch/arm/mach-omap2/sdram-micron-mt46h32m32lf-6.h new file mode 100644 index 0000000..b6c1db3 --- /dev/null +++ b/arch/arm/mach-omap2/sdram-micron-mt46h32m32lf-6.h @@ -0,0 +1,69 @@ +/* + * SDRC register values for the Micron MT46H32M32LF-6 + * + * Copyright (C) 2008 Texas Instruments, Inc. + * Copyright (C) 2008 Nokia Corporation + * + * Paul Walmsley + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef ARCH_ARM_MACH_OMAP2_SDRAM_MICRON_MT46H32M32LF +#define ARCH_ARM_MACH_OMAP2_SDRAM_MICRON_MT46H32M32LF + +#include <mach/sdrc.h> + +/* Micron MT46H32M32LF-6 */ +/* XXX Using ARE = 0x1 (no autorefresh burst) -- can this be changed? */ +static struct omap_sdrc_params mt46h32m32lf6_sdrc_params[] = { + [0] = { + .rate = 166000000, + .actim_ctrla = 0x9a9db4c6, + .actim_ctrlb = 0x00011217, + .rfr_ctrl = 0x0004dc01, + .mr = 0x00000032, + }, + [1] = { + .rate = 165941176, + .actim_ctrla = 0x9a9db4c6, + .actim_ctrlb = 0x00011217, + .rfr_ctrl = 0x0004dc01, + .mr = 0x00000032, + }, + [2] = { + .rate = 133333333, + .actim_ctrla = 0x7a19b485, + .actim_ctrlb = 0x00011213, + .rfr_ctrl = 0x0003de01, + .mr = 0x00000032, + }, + [3] = { + .rate = 83000000, + .actim_ctrla = 0x51512283, + .actim_ctrlb = 0x0001120c, + .rfr_ctrl = 0x00025501, + .mr = 0x00000032, + }, + [4] = { + .rate = 82970588, + .actim_ctrla = 0x51512283, + .actim_ctrlb = 0x0001120c, + .rfr_ctrl = 0x00025501, + .mr = 0x00000032, + }, + [5] = { + .rate = 66666666, + .actim_ctrla = 0x410d2243, + .actim_ctrlb = 0x0001120a, + .rfr_ctrl = 0x0001d601, + .mr = 0x00000032, + }, + [6] = { + .rate = 0 + }, +}; + +#endif -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
