This patch adds a Wakeup dependency of PER domain on WKUP domain as a Workaround for a OMAP3430 limitation which causes PER domain GPIO's to drive random values while coming back from OFF mode. This limitation applies to all silicon rev's of OMAP3430. Signed-off-by: Rajendra Nayak <rnayak@xxxxxx> --- arch/arm/mach-omap2/pm34xx.c | 9 +++++++++ 1 files changed, 9 insertions(+), 0 deletions(-) diff --git a/arch/arm/mach-omap2/pm34xx.c b/arch/arm/mach-omap2/pm34xx.c index 80992c5..231b33e 100644 --- a/arch/arm/mach-omap2/pm34xx.c +++ b/arch/arm/mach-omap2/pm34xx.c @@ -86,6 +86,7 @@ static int (*_omap_save_secure_sram)(u32 *addr); static struct powerdomain *mpu_pwrdm, *neon_pwrdm; static struct powerdomain *core_pwrdm, *per_pwrdm; static struct powerdomain *cam_pwrdm; +static struct powerdomain *wkup_pwrdm; static struct prm_setup_times prm_setup = { .clksetup = 0xff, @@ -1042,6 +1043,7 @@ int __init omap3_pm_init(void) per_pwrdm = pwrdm_lookup("per_pwrdm"); core_pwrdm = pwrdm_lookup("core_pwrdm"); cam_pwrdm = pwrdm_lookup("cam_pwrdm"); + wkup_pwrdm = pwrdm_lookup("wkup_pwrdm"); omap_push_sram_idle(); @@ -1063,6 +1065,13 @@ int __init omap3_pm_init(void) */ pwrdm_add_wkdep(per_pwrdm, core_pwrdm); + /* + * This is a WA for an OMAP limitation (Listed in the omap errata doc + * Section 2.23) which causes GPIO modules in PER domain to drive random + * values while coming back from OFF mode. + */ + pwrdm_add_wkdep(per_pwrdm, wkup_pwrdm); + if (omap_type() != OMAP2_DEVICE_TYPE_GP) { omap3_secure_ram_storage = kmalloc(0x803F, GFP_KERNEL); -- 1.5.4.7 -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html