Linux for Texus Instruments OMAP Processors

• Thread Index

• [PATCH 12/12] OMAP2/3: Initialize gpio debounce register
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 11/12] OMAP: IOMMU: function flush_iotlb_page is not flushing correct entry
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 10/12] OMAP3: RX51: Use OneNAND sync read / write
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 09/12] OMAP2/3: gpmc-onenand: correct use of async timings
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 08/12] OMAP3: DMA: Enable idlemodes for DMA OCP
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: Please help in adding ams-delta support to ASoC
  • From: Jarkko Nikula <jhnikula@xxxxxxxxx>
• [PATCH 07/12] OMAP3: SRAM size fix for HS/EMU devices
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 06/12] OMAP2/3: Add omap_type() for determining GP/EMU/HS
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 05/12] OMAP2/3: omap mailbox: platform_get_irq() error ignored
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 04/12] OMAP2/3: mmc-twl4030: use correct controller in twl_mmc23_set_power
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 03/12] OMAP1: remove duplicated #include
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 02/12] OMAP1: Fix N770 MMC support
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 01/12] OMAP1: Fix compilation of arch/arm/mach-omap1/mailbox.c
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 00/12] Omap fixes for 2.6.31
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [APPLIED] [PATCH] initialize gpio debounce register
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] Missing implementation of omap3evm_flash_init()
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 3/3] OMAP3 clock: correct module IDLEST bits: SSI; DSS; USBHOST; HSOTGUSB
  • From: Paul Walmsley <paul@xxxxxxxxx>
• [PATCH 1/3] OMAP2/3 clock: split, rename omap2_wait_clock_ready()
  • From: Paul Walmsley <paul@xxxxxxxxx>
• [PATCH 2/3] OMAP2 clock: 2430 I2CHS uses non-standard CM_IDLEST register
  • From: Paul Walmsley <paul@xxxxxxxxx>
• [PATCH 0/3] OMAP2/3 clock: fix module IDLEST code for unusual devs
  • From: Paul Walmsley <paul@xxxxxxxxx>
• Re: Missing OMAP nand drivers from 2.6.30?
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [ARM][OMAP] TWL4030 IRQ
  • From: "Shilimkar, Santosh" <santosh.shilimkar@xxxxxx>
• RE: [PATCH -pm 1/2] SDRC: check for stuck DLL state machine and kick
  • From: "Woodruff, Richard" <r-woodruff2@xxxxxx>
• Re: [PATCH 00/10] OMAP clock/powerdomain/SDRC patches for post-2.6.30
  • From: Paul Walmsley <paul@xxxxxxxxx>
• [PATCH][RFC] OMAP3: PM: Prevent hang in prcm_interrupt_handler
  • From: Jon Hunter <jon-hunter@xxxxxx>
• Re: Please help in adding ams-delta support to ASoC
  • From: Arun K S <arunks@xxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] initialize gpio debounce register
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• Missing OMAP nand drivers from 2.6.30?
  • From: Peter Barada <peterb@xxxxxxxxxxx>
• Re: [PATCH] usb: disable OTG AUTOIDLE only with omap3430
  • From: Niilo Minkkinen <niilo.minkkinen@xxxxxx>
• RE: omap_3430sdp_defconfig for multiple boards?
  • From: "Aguirre Rodriguez, Sergio Alberto" <saaguirre@xxxxxx>
• RE: omap_3430sdp_defconfig for multiple boards?
  • From: "Pandita, Vikram" <vikram.pandita@xxxxxx>
• RE: OMAP3 PM: off-mode during idle, problem with UART1 console
  • From: "Woodruff, Richard" <r-woodruff2@xxxxxx>
• Re: [PATCH 00/10] OMAP clock/powerdomain/SDRC patches for post-2.6.30
  • From: Jean Pihet <jpihet@xxxxxxxxxx>
• Re: [PATCH 00/10] OMAP clock/powerdomain/SDRC patches for post-2.6.30
  • From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
• Re: OMAP3 PM: off-mode during idle, problem with UART1 console
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• omap_3430sdp_defconfig for multiple boards?
  • From: "Aguirre Rodriguez, Sergio Alberto" <saaguirre@xxxxxx>
• [PATCH] initialize gpio debounce register
  • From: ye janboe <janboe.ye@xxxxxxxxx>
• [PATCH] ARM: MACH-OMAP2: Cleanup Kconfig entries
  • From: "Aguirre Rodriguez, Sergio Alberto" <saaguirre@xxxxxx>
• Re: Please help in adding ams-delta support to ASoC
  • From: Janusz Krzysztofik <jkrzyszt@xxxxxxxxxxxx>
• Re: MUSB ISSUE on OMAP3530 with USB-2-Ethernet converter
  • From: David Brownell <david-b@xxxxxxxxxxx>
• Re: [PATCH] usb: disable OTG AUTOIDLE only with omap3430
  • From: David Brownell <david-b@xxxxxxxxxxx>
• RE: OMAP3 PM: off-mode during idle, problem with UART1 console
  • From: "Nayak, Rajendra" <rnayak@xxxxxx>
• Re: Please help in adding ams-delta support to ASoC
  • From: Arun K S <arunks@xxxxxxxxxxxxxxxxxxxx>
• RE: [Question] omap3 clock framework for clock set_rate
  • From: "Wang Sawsd-A24013" <cqwang@xxxxxxxxxxxx>
• Re: [RESEND][PATCH] input: Added TSC2003
  • From: Kwangwoo Lee <kwangwoo.lee@xxxxxxxxx>
• Re: [Question] omap3 clock framework for clock set_rate
  • From: Paul Walmsley <paul@xxxxxxxxx>
• [Question] omap3 clock framework for clock set_rate
  • From: "Wang Sawsd-A24013" <cqwang@xxxxxxxxxxxx>
• RE: L-O master branch broken ?
  • From: "Aguirre Rodriguez, Sergio Alberto" <saaguirre@xxxxxx>
• [PATCH v2 2/2] OMAP3:Zoom2: Update board defconfig
  • From: Vikram Pandita <vikram.pandita@xxxxxx>
• [PATCH v2 1/2] OMAP3:Zoom2: Add TWL4030 support
  • From: Vikram Pandita <vikram.pandita@xxxxxx>
• [PATCH v2] OMAP3: MMC: Add mux for pins
  • From: Vikram Pandita <vikram.pandita@xxxxxx>
• Re: [PATCH] SDRC: Remove SDRC_POWER register configuration from SDRC init.
  • From: Paul Walmsley <paul@xxxxxxxxx>
• RE: [PATCH -pm 1/2] SDRC: check for stuck DLL state machine and kick
  • From: Paul Walmsley <paul@xxxxxxxxx>
• RE: [PATCH -pm 1/2] SDRC: check for stuck DLL state machine and kick
  • From: "Woodruff, Richard" <r-woodruff2@xxxxxx>
• RE: [PATCH -pm 1/2] SDRC: check for stuck DLL state machine and kick
  • From: "Wang Sawsd-A24013" <cqwang@xxxxxxxxxxxx>
• RE: [PATCH -pm 1/2] SDRC: check for stuck DLL state machine and kick
  • From: "Woodruff, Richard" <r-woodruff2@xxxxxx>
• RE: [PATCH] SDRC: Remove SDRC_POWER register configuration from SDRC init.
  • From: "Woodruff, Richard" <r-woodruff2@xxxxxx>
• Re: [PATCH] SDRC: Remove SDRC_POWER register configuration from SDRC init.
  • From: Mike Chan <mike@xxxxxxxxxxx>
• RE: [PATCH -pm 1/2] SDRC: check for stuck DLL state machine and kick
  • From: "Woodruff, Richard" <r-woodruff2@xxxxxx>
• Re: [APPLIED] [PATCH 2/2] OMAP: Zoom2: Fix file system loading issue
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• Re: L-O master branch broken ?
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH -pm 1/2] SDRC: check for stuck DLL state machine and kick
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 1/1] watchdog: OMAP fixes: enable clock in probe, trigger timer reload
  • From: Wim Van Sebroeck <wim@xxxxxxxxx>
• Re: L-O master branch broken ?
  • From: "Hemanth V" <hemanthv@xxxxxx>
• Re: [PATCH 2/2] OMAP3: SRAM size fix for HS/EMU devices
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• Re: [APPLIED] [PATCH 2/2] OMAP: Zoom2: Fix file system loading issue
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• RE: [APPLIED] [PATCH 2/2] OMAP: Zoom2: Fix file system loading issue
  • From: "Pandita, Vikram" <vikram.pandita@xxxxxx>
• [PATCH] Missing implementation of omap3evm_flash_init()
  • From: Sanjeev Premi <premi@xxxxxx>
• Re: [PATCH] TWL4030: Reset header file to mainline
  • From: Kalle Valo <kalle.valo@xxxxxx>
• Re: [PATCH] OMAP: McSPI: Fix RX DMA transfer path
  • From: Kalle Valo <kalle.valo@xxxxxx>
• Re: L-O master branch broken ?
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: Progress in adding ams-delta support to ASoC?
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: Progress in adding ams-delta support to ASoC?
  • From: Janusz Krzysztofik <jkrzyszt@xxxxxxxxxxxx>
• Re: Please help in adding ams-delta support to ASoC
  • From: Janusz Krzysztofik <jkrzyszt@xxxxxxxxxxxx>
• How to take advantage of DSP
  • From: "Can Bal" <canbal@xxxxxxxxxxxxxxxxx>
• Re: L-O master branch broken ?
  • From: "Hemanth V" <hemanthv@xxxxxx>
• Re: Progress in adding ams-delta support to ASoC?
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: L-O master branch broken ?
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• L-O master branch broken ?
  • From: "Hemanth V" <hemanthv@xxxxxx>
• Re: Progress in adding ams-delta support to ASoC?
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxxxxx>
• [APPLIED] [PATCH 1/2] Revert "OMAP3: SRAM size fix for HS/EMU devices"
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 1/1] IOMMU: function flush_iotlb_page is not flushing correct entry
  • From: Hiroshi DOYU <Hiroshi.DOYU@xxxxxxxxx>
• [APPLIED] [PATCH 2/2] OMAP3: SRAM size fix for HS/EMU devices
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 00/10] OMAP clock/powerdomain/SDRC patches for post-2.6.30
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [APPLIED] [PATCH 2/2] OMAP: Zoom2: Fix file system loading issue
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 2/2] OMAP3: SRAM size fix for HS/EMU devices
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 1/1] IOMMU: function flush_iotlb_page is not flushing correct entry
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] OMAP3: MMC: Add mux for pins
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: Please help in adding ams-delta support to ASoC
  • From: Jarkko Nikula <jhnikula@xxxxxxxxx>
• RE: [PATCH] SDRC: Remove SDRC_POWER register configuration from SDRC init.
  • From: <samu.p.onkalo@xxxxxxxxx>
• [PATCH] DSPBRIDGE: change offset of RSTCTRL and RSTST register to the correct value.
  • From: "Guzman Lugo, Fernando" <x0095840@xxxxxx>
• Re: [PATCH] OMAP3: MMC: Add mux for pins
  • From: Jon Hunter <jon-hunter@xxxxxx>
• RE: [PATCH -pm 1/2] SDRC: check for stuck DLL state machine and kick
  • From: "Woodruff, Richard" <r-woodruff2@xxxxxx>
• Re: [PATCH 0/2] adding back some features
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• [PATCH 2/2] OMAP3: SRAM size fix for HS/EMU devices
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• [PATCH 1/2] Revert "OMAP3: SRAM size fix for HS/EMU devices"
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• new 2.6.30-based PM branch
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• RE: [PATCH] OMAP3: MMC: Add mux for pins
  • From: "Pandita, Vikram" <vikram.pandita@xxxxxx>
• Re: [PATCH] OMAP3: MMC: Add mux for pins
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] OMAP3: MMC: Add mux for pins
  • From: Jon Hunter <jon-hunter@xxxxxx>
• RE: OMAP34XXCAM: Micron mt9d111 sensor support?
  • From: "Aguirre Rodriguez, Sergio Alberto" <saaguirre@xxxxxx>
• OMAP34XXCAM: Micron mt9d111 sensor support?
  • From: Zach LeRoy <zleroy@xxxxxxxxxxxxx>
• Re: [PATCH] OMAP3: MMC: Add mux for pins
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• [PATCH - V3] TVP514x: Migration to sub-device framework
  • From: m-karicheri2@xxxxxx
• [PATCH v4 0/2] watchdog:OMAP3:Add support for IVA2, SECURE WDTs
  • From: Ulrik Bech Hald <ubh@xxxxxx>
• [PATCH v4 1/2] watchdog:OMAP3:Register IVA and SECURE WDT, make clks accessible
  • From: Ulrik Bech Hald <ubh@xxxxxx>
• [PATCH v4 2/2] watchdog:OMAP3:Enable support for IVA2 and SECURE
  • From: Ulrik Bech Hald <ubh@xxxxxx>
• RE: [PATCH] OMAP3: MMC: Add mux for pins
  • From: "Pandita, Vikram" <vikram.pandita@xxxxxx>
• Re: [PATCH] OMAP3: MMC: Add mux for pins
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• RE: [PATCH] OMAP3: MMC: Add mux for pins
  • From: "Pandita, Vikram" <vikram.pandita@xxxxxx>
• [PATCH 4/7] DSPBRIDGE: Shared memory size increased to 5MB
  • From: Omar Ramirez Luna <omar.ramirez@xxxxxx>
• [PATCH 3/7] DSPBRIDGE: Handle properly user space pointers
  • From: Omar Ramirez Luna <omar.ramirez@xxxxxx>
• [PATCH 7/7] DSPBRIDGE: Reset MMU and DSP on board stop
  • From: Omar Ramirez Luna <omar.ramirez@xxxxxx>
• [PATCH 6/7] DSPBRIDGE: Keep DMM resources for other nodes on PROC_Detach
  • From: Omar Ramirez Luna <omar.ramirez@xxxxxx>
• [PATCH 1/7] DSPBRIDGE: Removing UTIL module
  • From: Omar Ramirez Luna <omar.ramirez@xxxxxx>
• [PATCH 2/7] DSPBRIDGE: Allow separate load/run addresses for Dynamic Loader
  • From: Omar Ramirez Luna <omar.ramirez@xxxxxx>
• [PATCH 0/7] DSPBRIDGE: latest set of patches
  • From: Omar Ramirez Luna <omar.ramirez@xxxxxx>
• [PATCH 5/7] DSPBRIDGE: Increased DMM size to 256MB
  • From: Omar Ramirez Luna <omar.ramirez@xxxxxx>
• RE: [PATCH 02/04] OMAP3: PM: Prevent AUTO_RET and AUTO_OFF being enabled simultaneously
  • From: "Derrick, David" <dderrick@xxxxxx>
• RE: [APPLIED] [PATCH 2/2] OMAP: Zoom2: Fix file system loading issue
  • From: "Pandita, Vikram" <vikram.pandita@xxxxxx>
• Re: [PATCH] SDRC: Remove SDRC_POWER register configuration from SDRC init.
  • From: Paul Walmsley <paul@xxxxxxxxx>
• Re: [APPLIED] [PATCH 2/2] OMAP: Zoom2: Fix file system loading issue
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• Re: [APPLIED] [PATCH 2/2] OMAP: Zoom2: Fix file system loading issue
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• RE: [APPLIED] [PATCH 2/2] OMAP: Zoom2: Fix file system loading issue
  • From: "Pandita, Vikram" <vikram.pandita@xxxxxx>
• Re: OMAP3 PM: off-mode during idle, problem with UART1 console
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• Re: OMAP3 PM: off-mode during idle, problem with UART1 console
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• RE: Linux OMAP 2.6.30 kernel not booting
  • From: "Pandita, Vikram" <vikram.pandita@xxxxxx>
• Re: [PATCH] TWL4030: Reset header file to mainline
  • From: Mark Brown <broonie@xxxxxxxxxxxxxxxxxxxxxxxxxxx>
• RE: [PATCH v3 1/2] watchdog:OMAP3:Register IVA and SECURE WDT, make clks accessible
  • From: "Hald, Ulrik Bech" <ubh@xxxxxx>
• RE: [PATCH v3 1/2] watchdog:OMAP3:Register IVA and SECURE WDT, make clks accessible
  • From: "Hald, Ulrik Bech" <ubh@xxxxxx>
• RE: OMAP3 PM: off-mode during idle, problem with UART1 console
  • From: "Woodruff, Richard" <r-woodruff2@xxxxxx>
• Re: [PATCH 2/2] watchdog:OMAP3:Enable support for IVA2 and SECURE
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] TWL4030: Reset header file to mainline
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] TWL4030: Reset header file to mainline
  • From: "Eugeny S. Mints" <eugeny.mints@xxxxxxxxx>
• Re: [PATCH] TWL4030: Reset header file to mainline
  • From: Amit Kucheria <amit.kucheria@xxxxxxxxxxxxx>
• RE: [PATCH 2/2] watchdog:OMAP3:Enable support for IVA2 and SECURE
  • From: "Hald, Ulrik Bech" <ubh@xxxxxx>
• Progress in adding ams-delta support to ASoC?
  • From: Janusz Krzysztofik <jkrzyszt@xxxxxxxxxxxx>
• Re: [PATCH] TWL4030: Reset header file to mainline
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 0/2] adding back some features
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• [APPLIED] [PATCH 2/2] OMAP: Zoom2: Fix file system loading issue
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• RE: [PATCH 0/2] adding back some features
  • From: <Tero.Kristo@xxxxxxxxx>
• Re: [PATCH v3 1/2] watchdog:OMAP3:Register IVA and SECURE WDT, make clks accessible
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] TWL4030: Reset header file to mainline
  • From: "Eugeny S. Mints" <eugeny.mints@xxxxxxxxx>
• Re: [PATCH] OMAP3: drop SmartReflex base addresses mistakenly added by EHCI patch
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [APPLIED] [PATCH] OMAP3: drop SmartReflex base addresses mistakenly added by
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH] SDRC: Remove SDRC_POWER register configuration from SDRC init.
  • From: Artem Bityutskiy <Artem.Bityutskiy@xxxxxxxxx>
• RE: [PATCH 01/04] OMAP3: PM: Disable PER DPLL idle before OFF, reduces OFF latency by 20ms
  • From: "Nayak, Rajendra" <rnayak@xxxxxx>
• RE: [PATCH 01/04] OMAP3: PM: Disable PER DPLL idle before OFF, reduces OFF latency by 20ms
  • From: Kalle Jokiniemi <kalle.jokiniemi@xxxxxxxxx>
• RE: [PATCH 01/04] OMAP3: PM: Disable PER DPLL idle before OFF, reduces OFF latency by 20ms
  • From: "Nayak, Rajendra" <rnayak@xxxxxx>
• Re: [PATCH] TWL4030: Reset header file to mainline
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] TWL4030: Reset header file to mainline
  • From: Felipe Balbi <felipe.balbi@xxxxxxxxx>
• [PATCH] TWL4030: Reset header file to mainline
  • From: Amit Kucheria <amit.kucheria@xxxxxxxxxxxxx>
• RE: [PATCH 01/04] OMAP3: PM: Disable PER DPLL idle before OFF, reduces OFF latency by 20ms
  • From: Kalle Jokiniemi <kalle.jokiniemi@xxxxxxxxx>
• Re: [PULL REQUEST] omapfb: Add support for new LCDs / misc fixes
  • From: Imre Deak <imre.deak@xxxxxxxxx>
• [PATCH] i2c-omap: Fix build breaking typo cpu_is_omap_2430
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 0/2] adding back some features
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• RE: [PATCH 01/04] OMAP3: PM: Disable PER DPLL idle before OFF, reduces OFF latency by 20ms
  • From: "Nayak, Rajendra" <rnayak@xxxxxx>
• [APPLIED] [PATCH 1/1] IOMMU: function flush_iotlb_page is not flushing
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [APPLIED] [PATCH 1/1] omap mailbox: platform_get_irq() error ignored
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [APPLIED] [PATCH 3/4] ARM: OMAP1: remove duplicated #include
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] Remove duplicate definitions
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] Remove duplicate definitions
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [APPLIED] [PATCH 0/2] adding back some features
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 0/2] adding back some features
  • From: Paul Walmsley <paul@xxxxxxxxx>
• [APPLIED] [PATCH 1/2] OMAP2/3: SoC IDs: add omap_type() for determining
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• RE: [PATCH 01/04] OMAP3: PM: Disable PER DPLL idle before OFF, reduces OFF latency by 20ms
  • From: Paul Walmsley <paul@xxxxxxxxx>
• Re: [PATCH 0/2] adding back some features
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] OMAP3: MMC: Add mux for pins
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH -pm 1/2] SDRC: check for stuck DLL state machine and kick
  • From: Paul Walmsley <paul@xxxxxxxxx>
• Re: Linux OMAP 2.6.30 kernel not booting
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• RE: [PATCH 02/04] OMAP3: PM: Prevent AUTO_RET and AUTO_OFF being enabled simultaneously
  • From: "Nayak, Rajendra" <rnayak@xxxxxx>
• RE: OMAP3 PM: off-mode during idle, problem with UART1 console
  • From: "Nayak, Rajendra" <rnayak@xxxxxx>
• RE: Linux OMAP 2.6.30 kernel not booting
  • From: "Pandita, Vikram" <vikram.pandita@xxxxxx>
• RE: Linux OMAP 2.6.30 kernel not booting
  • From: "Gunasekera, Nipuna" <gunasekera@xxxxxx>
• OMAP3 PM: off-mode during idle, problem with UART1 console
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 02/04] OMAP3: PM: Prevent AUTO_RET and AUTO_OFF being enabled simultaneously
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• Re: [PULL REQUEST] omapfb: Add support for new LCDs / misc fixes
  • From: Krzysztof Helt <krzysztof.h1@xxxxxxxxx>
• RE: [PATCH] OMAP3: MMC: Add mux for pins
  • From: "Pandita, Vikram" <vikram.pandita@xxxxxx>
• RE: [PATCH 01/04] OMAP3: PM: Disable PER DPLL idle before OFF, reduces OFF latency by 20ms
  • From: "Derrick, David" <dderrick@xxxxxx>
• Re: [PATCH] OMAP3: MMC: Add mux for pins
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 2/2] watchdog:OMAP3:Enable support for IVA2 and SECURE
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 1/2] watchdog:OMAP3:Register IVA and SECURE WDT, make clks accessible
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• RE: [PATCH] OMAP3: MMC: Add mux for pins
  • From: "Pandita, Vikram" <vikram.pandita@xxxxxx>
• Re: Please help in adding ams-delta support to ASoC
  • From: Janusz Krzysztofik <jkrzyszt@xxxxxxxxxxxx>
• Re: [PATCH 02/04] OMAP3: PM: Prevent AUTO_RET and AUTO_OFF being enabled simultaneously
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 01/04] OMAP3: PM: Disable PER DPLL idle before OFF, reduces OFF latency by 20ms
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• [PATCH v3 1/2] watchdog:OMAP3:Register IVA and SECURE WDT, make clks accessible
  • From: Ulrik Bech Hald <ubh@xxxxxx>
• [PATCH v3 2/2] watchdog:OMAP3:Enable support for IVA2 and SECURE
  • From: Ulrik Bech Hald <ubh@xxxxxx>
• [PATCH v3 0/2] watchdog:OMAP3:Add support for IVA2, SECURE WDTs
  • From: Ulrik Bech Hald <ubh@xxxxxx>
• RE: [PATCH 1/1] OMAP3:WDT:Enable clk in probe, trigger timer reload
  • From: "Hald, Ulrik Bech" <ubh@xxxxxx>
• RE: [PATCH 01/04] OMAP3: PM: Disable PER DPLL idle before OFF, reduces OFF latency by 20ms
  • From: "Nayak, Rajendra" <rnayak@xxxxxx>
• RE: [PATCH 02/04] OMAP3: PM: Prevent AUTO_RET and AUTO_OFF being enabled simultaneously
  • From: "Nayak, Rajendra" <rnayak@xxxxxx>
• RE: [PATCH 1/1] OMAP3:WDT:Enable clk in probe, trigger timer reload
  • From: "Premi, Sanjeev" <premi@xxxxxx>
• Re: [PATCH 01/04] OMAP3: PM: Disable PER DPLL idle before OFF, reduces OFF latency by 20ms
  • From: jouni.hogander@xxxxxxxxx (Högander Jouni)
• Re: [PATCH 02/04] OMAP3: PM: Prevent AUTO_RET and AUTO_OFF being enabled simultaneously
  • From: jouni.hogander@xxxxxxxxx (Högander Jouni)
• [PATCH 04/04] OMAP3: PM: Update sleep/wakeup sequence and device grp associations
  • From: Rajendra Nayak <rnayak@xxxxxx>
• [PATCH 02/04] OMAP3: PM: Prevent AUTO_RET and AUTO_OFF being enabled simultaneously
  • From: Rajendra Nayak <rnayak@xxxxxx>
• [PATCH 03/04] OMAP3: PM: Fix I2C voltage levels send to T2 for different Power modes
  • From: Rajendra Nayak <rnayak@xxxxxx>
• [PATCH 01/04] OMAP3: PM: Disable PER DPLL idle before OFF, reduces OFF latency by 20ms
  • From: Rajendra Nayak <rnayak@xxxxxx>
• [PATCH 00/04] OMAP3: PM: Optimizations and fixes in sleep/voltage scaling
  • From: "Nayak, Rajendra" <rnayak@xxxxxx>
• Build failure for OMAP3EVM
  • From: "Premi, Sanjeev" <premi@xxxxxx>
• [PATCH] Remove duplicate definitions
  • From: Sanjeev Premi <premi@xxxxxx>
• Re: [PATCH 11/20] omapfb: Add support for the ZOOM MDK LCD
  • From: Imre Deak <imre.deak@xxxxxxxxx>
• Re: [Linux-fbdev-devel] [PATCH 08/20] omapfb: Add support for the OMAP3 EVM LCD
  • From: Imre Deak <imre.deak@xxxxxxxxx>
• Re: [Linux-fbdev-devel] [PATCH 06/20] omapfb: Add support for the OMAP2EVM LCD
  • From: Imre Deak <imre.deak@xxxxxxxxx>
• Re: [Linux-fbdev-devel] [PATCH 05/20] omapfb: Add support for the 2430SDP LCD
  • From: Imre Deak <imre.deak@xxxxxxxxx>
• [PATCH 3/4] ARM: OMAP1: remove duplicated #include
  • From: Huang Weiyi <weiyi.huang@xxxxxxxxx>
• Re: [RESEND][PATCH] input: Added TSC2003
  • From: Thierry Reding <thierry.reding@xxxxxxxxxxxxxxxxx>
• [PATCH 2/2] OMAP3: Setup MUX settings for SDRC CKE signals
  • From: Jean Pihet <jpihet@xxxxxxxxxx>
• [PATCH 1/2] OMAP3: add support for 2 SDRAM chip selects
  • From: Jean Pihet <jpihet@xxxxxxxxxx>
• [PATCH 0/2] Allows the SDRAM self refresh to work with 2 chip selects
  • From: Jean Pihet <jpihet@xxxxxxxxxx>
• Re: [RESEND][PATCH] input: Added TSC2003
  • From: Richard Röjfors <richard.rojfors.ext@xxxxxxxxxxxxxxx>
• Re: [RESEND][PATCH] input: Added TSC2003
  • From: Thierry Reding <thierry.reding@xxxxxxxxxxxxxxxxx>
• [PATCH 2/2] OMAP3: MMC: Add mux for pins
  • From: Vikram Pandita <vikram.pandita@xxxxxx>
• [PATCH 1/2] OMAP3: MMC: Pass pin muxing control flag
  • From: Vikram Pandita <vikram.pandita@xxxxxx>
• [PATCH -pm 2/2] SDRC: whitespace cleanups in DLL lock code
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• [PATCH -pm 1/2] SDRC: check for stuck DLL state machine and kick
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• [PATCH -pm 0/2] SDRC tweaks for stuck DLL state machine
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• RE: Did I miss any other patches or RFCs that need to be reviewed?
  • From: "Karicheri, Muralidharan" <m-karicheri2@xxxxxx>
• Re: Did I miss any other patches or RFCs that need to be reviewed?
  • From: Hans Verkuil <hverkuil@xxxxxxxxx>
• [PATCH 2/2] watchdog:OMAP3:Enable support for IVA2 and SECURE
  • From: Ulrik Bech Hald <ubh@xxxxxx>
• [PATCH 0/2] watchdog:OMAP3:Add support for IVA2, SECURE WDTs
  • From: Ulrik Bech Hald <ubh@xxxxxx>
• [PATCH 1/2] watchdog:OMAP3:Register IVA and SECURE WDT, make clks accessible
  • From: Ulrik Bech Hald <ubh@xxxxxx>
• Re: [RESEND][PATCH] input: Added TSC2003
  • From: Richard Röjfors <richard.rojfors.ext@xxxxxxxxxxxxxxx>
• Re: [PATCH] OMAP3: PM: Program SDRC to send self refresh on timeout of AUTO_CNT
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• RE: Did I miss any other patches or RFCs that need to be reviewed?
  • From: "Karicheri, Muralidharan" <m-karicheri2@xxxxxx>
• Re: [RESEND][PATCH] input: Added TSC2003
  • From: Trilok Soni <soni.trilok@xxxxxxxxx>
• Re: Did I miss any other patches or RFCs that need to be reviewed?
  • From: Hans Verkuil <hverkuil@xxxxxxxxx>
• [PATCH] OMAP3: drop SmartReflex base addresses mistakenly added by EHCI patch
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 2/3] OMAP3:WDT:Enable support for IVA and SECURE
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• RE: Did I miss any other patches or RFCs that need to be reviewed?
  • From: "Karicheri, Muralidharan" <m-karicheri2@xxxxxx>
• RE: [PATCH 2/3] OMAP3:WDT:Enable support for IVA and SECURE
  • From: "Hald, Ulrik Bech" <ubh@xxxxxx>
• Re: [PATCH 0/2] adding back some features
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• RE: [PATCH] OMAP3: MMC: Add mux for pins
  • From: "Madhusudhan" <madhu.cr@xxxxxx>
• Re: Please help in adding ams-delta support to ASoC
  • From: Jarkko Nikula <jhnikula@xxxxxxxxx>
• Re: [PATCH 0/2] adding back some features
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• Re: Please help in adding ams-delta support to ASoC
  • From: Janusz Krzysztofik <jkrzyszt@xxxxxxxxxxxx>
• RE: [PATCH 1/1] OMAP3:Re-introduce omap_type()
  • From: "Hald, Ulrik Bech" <ubh@xxxxxx>
• [PATCH] OMAP2/3: Add support for flash on SDP boards
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [APPLIED] [PATCH] OMAP: RX51: use OneNAND sync read / write
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [APPLIED] [PATCH] OMAP: gpmc-onenand: correct use of async timings
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] OMAP3: MMC: Add mux for pins
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] OMAP3: MMC: Add mux for pins
  • From: Hugo Vincent <hugo.vincent@xxxxxxxxx>
• Re: [patch] Fix brf6510 cleanup code
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 1/1] IOMMU: function flush_iotlb_page is not flushing correct entry
  • From: Hiroshi DOYU <Hiroshi.DOYU@xxxxxxxxx>
• Re: [PATCH 1/1] omap mailbox: platform_get_irq() error ignored
  • From: Hiroshi DOYU <Hiroshi.DOYU@xxxxxxxxx>
• [PATCH 1/1] omap mailbox: platform_get_irq() error ignored
  • From: Hiroshi DOYU <Hiroshi.DOYU@xxxxxxxxx>
• [APPLIED] [TRIVIAL PATCH] Fix compilation of arch/arm/mach-omap1/mailbox.c
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [TRIVIAL PATCH] Fix compilation of arch/arm/mach-omap1/mailbox.c
  • From: Hiroshi DOYU <Hiroshi.DOYU@xxxxxxxxx>
• Re: [TRIVIAL PATCH] Fix compilation of arch/arm/mach-omap1/mailbox.c
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [patch] Fix brf6510 cleanup code
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [APPLIED] [PATCH 2/2] OMAP3: DMA: Enable idlemodes for DMA OCP
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: tcm825x.c: migrating to sub-device framework?
  • From: Sakari Ailus <sakari.ailus@xxxxxxxxxxxxxxxxxxxxxxxxxx>
• Re: [patch] Fix brf6510 cleanup code
  • From: Ville Tervo <ville.tervo@xxxxxxxxx>
• Re: [PATCH] OMAP: McSPI: Fix RX DMA transfer path
  • From: Aaro Koskinen <aaro.koskinen@xxxxxxxxx>
• Re: [PATCH] OMAP3: MMC: Add mux for pins
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [patch] Fix brf6510 cleanup code
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 0/2] adding back some features
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] OMAP: McSPI: Fix RX DMA transfer path
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [TRIVIAL PATCH] Fix compilation of arch/arm/mach-omap1/mailbox.c
  • From: Hiroshi DOYU <Hiroshi.DOYU@xxxxxxxxx>
• Re: [PATCH] OMAP: McSPI: Fix RX DMA transfer path
  • From: "Hemanth V" <hemanthv@xxxxxx>
• Re: [Linux-fbdev-devel] [PATCH 02/20] omapfb: Add support for MIPI-DCS compatible LCDs
  • From: Krzysztof Helt <krzysztof.h1@xxxxxxxxx>
• Re: [PATCH 11/20] omapfb: Add support for the ZOOM MDK LCD
  • From: Krzysztof Helt <krzysztof.h1@xxxxxxxxx>
• Re: [PATCH 20/20] omapfb: HWA742: fix pointer to be const
  • From: Krzysztof Helt <krzysztof.h1@xxxxxxxxx>
• Re: [Linux-fbdev-devel] [PATCH 19/20] omapfb: Add FB manual update option to Kconfig
  • From: Krzysztof Helt <krzysztof.h1@xxxxxxxxx>
• Re: [Linux-fbdev-devel] [PATCH 18/20] omapfb: Fix coding style / remove dead line
  • From: Krzysztof Helt <krzysztof.h1@xxxxxxxxx>
• Re: [Linux-fbdev-devel] [PATCH 17/20] omapfb: suspend/resume only if FB device is already initialized
  • From: Krzysztof Helt <krzysztof.h1@xxxxxxxxx>
• Re: [Linux-fbdev-devel] [PATCH 16/20] omapfb: dispc: Allow multiple external IRQ handlers
  • From: Krzysztof Helt <krzysztof.h1@xxxxxxxxx>
• Re: [Linux-fbdev-devel] [PATCH 15/20] omapfb: dispc: Enable wake up capability
  • From: Krzysztof Helt <krzysztof.h1@xxxxxxxxx>
• Re: [Linux-fbdev-devel] [PATCH 14/20] omapfb: dispc: Disable iface clocks along with func clocks
  • From: Krzysztof Helt <krzysztof.h1@xxxxxxxxx>
• Re: [Linux-fbdev-devel] [PATCH 13/20] omapfb: dispc: Various typo fixes
  • From: Krzysztof Helt <krzysztof.h1@xxxxxxxxx>
• Re: [Linux-fbdev-devel] [PATCH 12/20] omapfb: Add support for rotation on the Blizzard LCD ctrl
  • From: Krzysztof Helt <krzysztof.h1@xxxxxxxxx>
• Re: [Linux-fbdev-devel] [PATCH 11/20] omapfb: Add support for the ZOOM MDK LCD
  • From: Krzysztof Helt <krzysztof.h1@xxxxxxxxx>
• Re: [Linux-fbdev-devel] [PATCH 10/20] omapfb: Add support for the Gumstix Overo LCD
  • From: Krzysztof Helt <krzysztof.h1@xxxxxxxxx>
• Re: [Linux-fbdev-devel] [PATCH 09/20] omapfb: Add support for the OMAP3 Beagle DVI output
  • From: Krzysztof Helt <krzysztof.h1@xxxxxxxxx>
• Re: [Linux-fbdev-devel] [PATCH 08/20] omapfb: Add support for the OMAP3 EVM LCD
  • From: Krzysztof Helt <krzysztof.h1@xxxxxxxxx>
• Re: [Linux-fbdev-devel] [PATCH 07/20] omapfb: Add support for the 3430SDP LCD
  • From: Krzysztof Helt <krzysztof.h1@xxxxxxxxx>
• Re: [Linux-fbdev-devel] [PATCH 06/20] omapfb: Add support for the OMAP2EVM LCD
  • From: Krzysztof Helt <krzysztof.h1@xxxxxxxxx>
• Re: [Linux-fbdev-devel] [PATCH 05/20] omapfb: Add support for the 2430SDP LCD
  • From: Krzysztof Helt <krzysztof.h1@xxxxxxxxx>
• Re: [Linux-fbdev-devel] [PATCH 04/20] omapfb: Add support for the Amstrad Delta LCD
  • From: Krzysztof Helt <krzysztof.h1@xxxxxxxxx>
• Re: [PATCH (V2)] TVP514x: Migration to sub-device framework
  • From: David Brownell <david-b@xxxxxxxxxxx>
• tcm825x.c: migrating to sub-device framework? (was: TVP514x: Migration to sub-device framework)
  • From: Hans Verkuil <hverkuil@xxxxxxxxx>
• Did I miss any other patches or RFCs that need to be reviewed?
  • From: Hans Verkuil <hverkuil@xxxxxxxxx>
• Re: [PATCH (V2)] TVP514x: Migration to sub-device framework
  • From: Hans Verkuil <hverkuil@xxxxxxxxx>
• Re: [PATCH (V2)] TVP514x: Migration to sub-device framework
  • From: Hans Verkuil <hverkuil@xxxxxxxxx>
• Re: [PATCH] OMAP: McSPI: Fix RX DMA transfer path
  • From: Kalle Valo <kalle.valo@xxxxxx>
• Re: [PATCH 1/1] OMAP3:WDT:Enable clk in probe, trigger timer reload
  • From: Hugo Vincent <hugo.vincent@xxxxxxxxx>
• Re: OMAP3xxx hsmmc : MMC3 doesn't work, always times out?
  • From: Hugo Vincent <hugo.vincent@xxxxxxxxx>
• Re: OMAP3xxx hsmmc : MMC3 doesn't work, always times out?
  • From: Hugo Vincent <hugo.vincent@xxxxxxxxx>
• [TRIVIAL PATCH] Fix compilation of arch/arm/mach-omap1/mailbox.c
  • From: Jonathan McDowell <noodles@xxxxxxxx>
• Re: [PATCH 1/2] Serial: Define IRQ flags for 8250 driver
  • From: Felipe Contreras <felipe.contreras@xxxxxxxxx>
• [PATCH 2/2] OMAP3:Zoom2: Update board defconfig
  • From: Vikram Pandita <vikram.pandita@xxxxxx>
• [PATCH 1/2] OMAP3:Zoom2: Add TWL4030 support
  • From: Vikram Pandita <vikram.pandita@xxxxxx>
• [PATCH] OMAP3: MMC: Add mux for pins
  • From: Vikram Pandita <vikram.pandita@xxxxxx>
• Re: [PATCH 1/1] OMAP3:Re-introduce omap_type()
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• [PATCH 2/2] OMAP3: DMA: Enable idlemodes for DMA OCP
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• [PATCH 1/2] OMAP2/3: SoC IDs: add omap_type() for determining GP/EMU/HS
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• [PATCH 0/2] adding back some features
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• RE: [RFC][PATCH] DSPBRIDGE: Video Playback Cache Optimization
  • From: "Kanigeri, Hari" <h-kanigeri2@xxxxxx>
• [PATCH 1/1] watchdog: OMAP fixes: enable clock in probe, trigger timer reload
  • From: Ulrik Bech Hald <ubh@xxxxxx>
• [PATCH 1/1] OMAP3:Re-introduce omap_type()
  • From: Ulrik Bech Hald <ubh@xxxxxx>
• Re: [PATCH] serial: 8250: add IRQ trigger support
  • From: Marc Zyngier <maz@xxxxxxxxxxxxxxx>
• RE: [PATCH 1/2] Serial: Define IRQ flags for 8250 driver
  • From: "Pandita, Vikram" <vikram.pandita@xxxxxx>
• Re: [PATCH 1/2] Serial: Define IRQ flags for 8250 driver
  • From: Felipe Balbi <felipe.balbi@xxxxxxxxx>
• [PATCH] serial: 8250: add IRQ trigger support
  • From: Vikram Pandita <vikram.pandita@xxxxxx>
• Re: [PATCH 1/2] Serial: Define IRQ flags for 8250 driver
  • From: Marc Zyngier <maz@xxxxxxxxxxxxxxx>
• Re: [PATCH 1/2] Serial: Define IRQ flags for 8250 driver
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 1/1] OMAP3:WDT:Enable clk in probe, trigger timer reload
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• [PATCH 1/1] OMAP3:WDT:Enable clk in probe, trigger timer reload
  • From: Ulrik Bech Hald <ubh@xxxxxx>
• RE: [RFC] OMAP4:mailbox changes
  • From: "Kanigeri, Hari" <h-kanigeri2@xxxxxx>
• RE: OMAP3xxx hsmmc : MMC3 doesn't work, always times out?
  • From: "Madhusudhan" <madhu.cr@xxxxxx>
• RE: [PATCH 1/2] Serial: Define IRQ flags for 8250 driver
  • From: "Menon, Nishanth" <nm@xxxxxx>
• RE: [PATCH 1/2] Serial: Define IRQ flags for 8250 driver
  • From: "Pandita, Vikram" <vikram.pandita@xxxxxx>
• RE: [PATCH 1/2] Serial: Define IRQ flags for 8250 driver
  • From: "Menon, Nishanth" <nm@xxxxxx>
• Re: Which directory should OMAP-L137/L138's code in ?
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• [PATCH] OMAP: McSPI: Fix RX DMA transfer path
  • From: Aaro Koskinen <aaro.koskinen@xxxxxxxxx>
• [PATCH] OMAP: gpmc-onenand: correct use of async timings
  • From: Adrian Hunter <adrian.hunter@xxxxxxxxx>
• [PATCH] OMAP: RX51: use OneNAND sync read / write
  • From: Adrian Hunter <adrian.hunter@xxxxxxxxx>
• Re: Which directory should OMAP-L137/L138's code in ?
  • From: "stanley.miao" <stanley.miao@xxxxxxxxxxxxx>
• Re: [RFC] [PATCH] input: export gpio-keys driven switch status over gpiolib sysfs
  • From: Janusz Krzysztofik <jkrzyszt@xxxxxxxxxxxx>
• RE: Which directory should OMAP-L137/L138's code in ?
  • From: "Syed Mohammed, Khasim" <khasim@xxxxxx>
• Re: Which directory should OMAP-L137/L138's code in ?
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Which directory should OMAP-L137/L138's code in ?
  • From: "stanley.miao" <stanley.miao@xxxxxxxxxxxxx>
• Re: OMAP3xxx hsmmc : MMC3 doesn't work, always times out?
  • From: Adrian Hunter <adrian.hunter@xxxxxxxxx>
• Re: [PATCH 1/2] Serial: Define IRQ flags for 8250 driver
  • From: Felipe Balbi <felipe.balbi@xxxxxxxxx>
• Re: [RFC] OMAP4:mailbox changes
  • From: Hiroshi DOYU <Hiroshi.DOYU@xxxxxxxxx>
• RE: [PATCH 1/2] Serial: Define IRQ flags for 8250 driver
  • From: "Menon, Nishanth" <nm@xxxxxx>
• [PATCH 1/2] Serial: Define IRQ flags for 8250 driver
  • From: Vikram Pandita <vikram.pandita@xxxxxx>
• [PATCH 2/2] OMAP: Zoom2: Fix file system loading issue
  • From: Vikram Pandita <vikram.pandita@xxxxxx>
• [PATCH 1/2] Serial: Define IRQ flags for 8250 driver
  • From: Vikram Pandita <vikram.pandita@xxxxxx>
• Re: Patch: Init/shutdown correctness fixes for drivers/cbus/tahvo*
  • From: Felipe Balbi <felipe.balbi@xxxxxxxxx>
• RE: OMAP3xxx hsmmc : MMC3 doesn't work, always times out?
  • From: "Gadiyar, Anand" <gadiyar@xxxxxx>
• Re: Patch: Init/shutdown correctness fixes for drivers/cbus/tahvo*
  • From: Andrew de Quincey <adq_dvb@xxxxxxxxxxxxx>
• RE: [RFC][PATCH] DSPBRIDGE: Video Playback Cache Optimization
  • From: "Kanigeri, Hari" <h-kanigeri2@xxxxxx>
• Re: [PATCH 1/2] McSPI Slave and DMA,FIFO support
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• RE: [RFC][PATCH] DSPBRIDGE: Video Playback Cache Optimization
  • From: "Bagadia, Sripal" <bagadia@xxxxxx>
• Re: [PATCH 1/2] McSPI Slave and DMA,FIFO support
  • From: "Hemanth V" <hemanthv@xxxxxx>
• [RFC] OMAP4:mailbox changes
  • From: "Kanigeri, Hari" <h-kanigeri2@xxxxxx>
• Re: [PATCH 1/2] McSPI Slave and DMA,FIFO support
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 1/2] McSPI Slave and DMA,FIFO support
  • From: "Hemanth V" <hemanthv@xxxxxx>
• Re: DSS2 TV settings
  • From: halli manjunatha <hallimanju@xxxxxxxxx>
• [PULL REQUEST] omapfb: Add support for new LCDs / misc fixes
  • From: Imre Deak <imre.deak@xxxxxxxxx>
• Re: DSS2 TV settings
  • From: Gary Thomas <gary@xxxxxxxxxxxx>
• Re: OMAP3xxx hsmmc : MMC3 doesn't work, always times out?
  • From: Hugo Vincent <hugo.vincent@xxxxxxxxx>
• Re: DSS2 TV settings
  • From: halli manjunatha <hallimanju@xxxxxxxxx>
• Re: Patch: Init/shutdown correctness fixes for drivers/cbus/tahvo*
  • From: Felipe Balbi <felipe.balbi@xxxxxxxxx>
• Re: Patch: Init/shutdown correctness fixes for drivers/cbus/retu*
  • From: Felipe Balbi <felipe.balbi@xxxxxxxxx>
• Re: OMAP3xxx hsmmc : MMC3 doesn't work, always times out?
  • From: Grazvydas Ignotas <notasas@xxxxxxxxx>
• [rfc/rft/patch 3/3] sti: netlink: convert to register to new bus
  • From: Felipe Balbi <felipe.balbi@xxxxxxxxx>
• [rfc/rft/patch 0/3] sti driver patches
  • From: Felipe Balbi <felipe.balbi@xxxxxxxxx>
• [rfc/rft/patch 2/3] sti: make it a bus driver
  • From: Felipe Balbi <felipe.balbi@xxxxxxxxx>
• [rfc/rft/patch 1/3] sti: cleanup to merge
  • From: Felipe Balbi <felipe.balbi@xxxxxxxxx>
• Re: OMAP3xxx hsmmc : MMC3 doesn't work, always times out?
  • From: Hugo Vincent <hugo.vincent@xxxxxxxxx>
• Re: [PATCH] IOMMU: function flush_iotlb_page is not flushing correct entry
  • From: Hiroshi DOYU <Hiroshi.DOYU@xxxxxxxxx>
• Re: [RFC][PATCH] DSPBRIDGE: Video Playback Cache Optimization
  • From: Hiroshi DOYU <Hiroshi.DOYU@xxxxxxxxx>
• What does .potpg represent in struct sl811_platform_data platform_data
  • From: Elvis Dowson <elvis.dowson@xxxxxxx>
• Re: [RFC] [PATCH] input: add definition for handset pick up switch event
  • From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
• Re: [RFC] [PATCH] input: export gpio-keys driven switch status over gpiolib sysfs
  • From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
• Re: DSS2 TV settings
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxxxxx>
• Re: OMAP3xxx hsmmc : MMC3 doesn't work, always times out?
  • From: Peter Barada <peterb@xxxxxxxxxxx>
• Re: OMAP3xxx hsmmc : MMC3 doesn't work, always times out?
  • From: Hugo Vincent <hugo.vincent@xxxxxxxxx>
• RE: OMAP3xxx hsmmc : MMC3 doesn't work, always times out?
  • From: "Pandita, Vikram" <vikram.pandita@xxxxxx>
• OMAP3xxx hsmmc : MMC3 doesn't work, always times out?
  • From: Hugo Vincent <hugo.vincent@xxxxxxxxx>
• [PATCH] IOMMU: function flush_iotlb_page is not flushing correct entry
  • From: "Guzman Lugo, Fernando" <x0095840@xxxxxx>
• Re: [alsa-devel] Please help in adding ams-delta support to ASoC
  • From: Janusz Krzysztofik <jkrzyszt@xxxxxxxxxxxx>
• DSS2 TV settings
  • From: Gary Thomas <gary@xxxxxxxxxxxx>
• [PATCH] omapfb: Add support for MIPI-DCS compatible LCDs
  • From: Imre Deak <imre.deak@xxxxxxxxx>
• OMAP submissions for next merge window
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• Re: [alsa-devel] Please help in adding ams-delta support to ASoC
  • From: Janusz Krzysztofik <jkrzyszt@xxxxxxxxxxxx>
• Important changes, bunch of legacy code removed from linux-omap tree
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: MUSB Host problems
  • From: Gary Thomas <gary@xxxxxxxxxxxx>
• Re: [alsa-devel] Please help in adding ams-delta support to ASoC
  • From: Janusz Krzysztofik <jkrzyszt@xxxxxxxxxxxx>
• Re: [alsa-devel] Please help in adding ams-delta support to ASoC
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxxxxx>
• Re: [alsa-devel] Please help in adding ams-delta support to ASoC
  • From: Janusz Krzysztofik <jkrzyszt@xxxxxxxxxxxx>
• Re: [alsa-devel] Please help in adding ams-delta support to ASoC
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxxxxx>
• Re: [RFC][PATCH] DSPBRIDGE: Video Playback Cache Optimization
  • From: Hiroshi DOYU <Hiroshi.DOYU@xxxxxxxxx>
• Re: MUSB Host problems
  • From: Jarkko Nikula <jhnikula@xxxxxxxxx>
• RE: MUSB Host problems
  • From: "Pandita, Vikram" <vikram.pandita@xxxxxx>
• RE: [RFC][PATCH] DSPBRIDGE: Video Playback Cache Optimization
  • From: "Ramirez Luna, Omar" <omar.ramirez@xxxxxx>
• Re: [RFC][PATCH] DSPBRIDGE: Video Playback Cache Optimization
  • From: Felipe Contreras <felipe.contreras@xxxxxxxxx>
• RE: [PATCHv3] DSPBRIDGE: Buffer size warning fixes
  • From: "Guzman Lugo, Fernando" <x0095840@xxxxxx>
• Re: [PATCH 2/3] OMAP3:WDT:Enable support for IVA and SECURE
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• omap-pm: Console not suspending
  • From: Elvis Dowson <elvis.dowson@xxxxxxx>
• RE: [PATCH 2/3] OMAP3:WDT:Enable support for IVA and SECURE
  • From: "Hald, Ulrik Bech" <ubh@xxxxxx>
• Re: MUSB Host problems
  • From: Gary Thomas <gary@xxxxxxxxxxxx>
• Re: [PATCH 0/3] OMAP3:WDT:Enable IVA, SECURE and minor bugfixes
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• RE: [PATCH 0/3] OMAP3:WDT:Enable IVA, SECURE and minor bugfixes
  • From: "Hald, Ulrik Bech" <ubh@xxxxxx>
• RE: MUSB Host problems
  • From: "Pandita, Vikram" <vikram.pandita@xxxxxx>
• MUSB Host problems
  • From: Gary Thomas <gary@xxxxxxxxxxxx>
• Re: [patch] Convert cbus driver code to use platform APIs consistently
  • From: Andrew de Quincey <adq_dvb@xxxxxxxxxxxxx>
• [PATCH] OMAP3: PM: Program SDRC to send self refresh on timeout of AUTO_CNT
  • From: Rajendra Nayak <rnayak@xxxxxx>
• Re: [PATCH] [MTD] [NAND] Add prefetch and dma support for omap2/3 NAND driver
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• RE: [PATCH] [MTD] [NAND] Add prefetch and dma support for omap2/3 NAND driver
  • From: "Singh, Vimal" <IMCEAEX-_O=TI_OU=BD_CN=RECIPIENTS_CN=X0094262@xxxxxxxxxxxxxxxxx>
• Re: [alsa-devel] Please help in adding ams-delta support to ASoC
  • From: Janusz Krzysztofik <jkrzyszt@xxxxxxxxxxxx>
• Re: Please help in adding ams-delta support to ASoC
  • From: Janusz Krzysztofik <jkrzyszt@xxxxxxxxxxxx>
• Re: [PATCH 0/3] OMAP3:WDT:Enable IVA, SECURE and minor bugfixes
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 2/3] OMAP3:WDT:Enable support for IVA and SECURE
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• Source code for TI OMAP 3530 OpenGL h/w acceleration drivers
  • From: Elvis Dowson <elvis.dowson@xxxxxxx>
• Re: [PATCH] DSPBRIDGE: Compiler wanrning fix for unlocked_ioctl
  • From: Felipe Contreras <felipe.contreras@xxxxxxxxx>
• Re: [Linux-fbdev-devel] [PATCH 02/20] omapfb: Add support for MIPI-DCS compatible LCDs
  • From: Imre Deak <imre.deak@xxxxxxxxx>
• Re: [patch] Convert cbus driver code to use platform APIs consistently
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] [MTD] [NAND] Add prefetch and dma support for omap2/3 NAND driver
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCHv2] DSPBRIDGE: Various compile warning fixes
  • From: Ameya Palande <ameya.palande@xxxxxxxxx>
• RE: [PATCH 0/4]ARM: OMAP4: SMP: Patch series
  • From: "Shilimkar, Santosh" <santosh.shilimkar@xxxxxx>
• Re: [PATCH] DSPBRIDGE: Compiler wanrning fix for unlocked_ioctl
  • From: Hiroshi DOYU <Hiroshi.DOYU@xxxxxxxxx>
• Re: [PATCH] DSPBRIDGE: Compiler wanrning fix for unlocked_ioctl
  • From: Felipe Contreras <felipe.contreras@xxxxxxxxx>
• Re: [PATCH] DSPBRIDGE: Compiler wanrning fix for unlocked_ioctl
  • From: Felipe Contreras <felipe.contreras@xxxxxxxxx>
• RE: [RFC][PATCH] OMAP3: add support for 2 SDRAM chip selects
  • From: <Tero.Kristo@xxxxxxxxx>
• Re: [RFC][PATCH] OMAP3: add support for 2 SDRAM chip selects
  • From: Jean Pihet <jpihet@xxxxxxxxxx>
• RE: [RFC][PATCH] OMAP3: add support for 2 SDRAM chip selects
  • From: <Tero.Kristo@xxxxxxxxx>
• Re: [RFC][PATCH] OMAP3: add support for 2 SDRAM chip selects (was: Re: Beagleboard rev C memory timings & suspend/resume)
  • From: Paul Walmsley <paul@xxxxxxxxx>
• Re: [alsa-devel] Please help in adding ams-delta support to ASoC
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxxxxx>
• Re: [PATCH 00/10] OMAP clock/powerdomain/SDRC patches for post-2.6.30
  • From: Paul Walmsley <paul@xxxxxxxxx>
• Re: [PATCH] DSPBRIDGE: Compiler wanrning fix for unlocked_ioctl
  • From: Hiroshi DOYU <Hiroshi.DOYU@xxxxxxxxx>
• RE: [PATCH] DSPBRIDGE: Compiler wanrning fix for unlocked_ioctl
  • From: "Kanigeri, Hari" <h-kanigeri2@xxxxxx>
• RE: [PATCHv3] DSPBRIDGE: Buffer size warning fixes
  • From: "Guzman Lugo, Fernando" <x0095840@xxxxxx>
• Re: What does CONFIG_SYSFS_DEPRECATED do?
  • From: Elvis Dowson <elvis.dowson@xxxxxxx>
• Re: [PATCH] DSPBRIDGE: Compiler wanrning fix for unlocked_ioctl
  • From: Felipe Contreras <felipe.contreras@xxxxxxxxx>
• [PATCH 0/3] OMAP3:WDT:Enable IVA, SECURE and minor bugfixes
  • From: Ulrik Bech Hald <ubh@xxxxxx>
• [PATCH 3/3] OMAP3:WDT:Enable clk in probe, trigger timer reload
  • From: Ulrik Bech Hald <ubh@xxxxxx>
• [PATCH 2/3] OMAP3:WDT:Enable support for IVA and SECURE
  • From: Ulrik Bech Hald <ubh@xxxxxx>
• [PATCH 1/3] OMAP3:WDT:Register IVA,SECURE, make clks accessible
  • From: Ulrik Bech Hald <ubh@xxxxxx>
• RE: [PATCH] DSPBRIDGE: Compiler wanrning fix for unlocked_ioctl
  • From: "Kanigeri, Hari" <h-kanigeri2@xxxxxx>
• Re: Require long touchscreen press to get system to resume
  • From: Elvis Dowson <elvis.dowson@xxxxxxx>
• [patch] Fix brf6510 cleanup code
  • From: Andrew de Quincey <adq_dvb@xxxxxxxxxxxxx>
• Require long touchscreen press to get system to resume
  • From: Elvis Dowson <elvis.dowson@xxxxxxx>
• [patch] Convert cbus driver code to use platform APIs consistently
  • From: Andrew de Quincey <adq_dvb@xxxxxxxxxxxxx>
• Re: Patch: Init/shutdown correctness fixes for drivers/cbus/tahvo*
  • From: Andrew de Quincey <adq_dvb@xxxxxxxxxxxxx>
• Re: What does CONFIG_SYSFS_DEPRECATED do?
  • From: Koen Kooi <k.kooi@xxxxxxxxxxxxxxxxxx>
• Re: [RFC][PATCH] OMAP3: add support for 2 SDRAM chip selects
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• Re: [RFC][PATCH] OMAP3: add support for 2 SDRAM chip selects
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• Re: [RFC][PATCH] OMAP3: add support for 2 SDRAM chip selects (was: Re: Beagleboard rev C memory timings & suspend/resume)
  • From: Jean Pihet <jpihet@xxxxxxxxxx>
• Re: [RFC][PATCH] OMAP3: add support for 2 SDRAM chip selects (was: Re: Beagleboard rev C memory timings & suspend/resume)
  • From: Jean Pihet <jpihet@xxxxxxxxxx>
• RE: [PATCH] [MTD] [NAND] Add prefetch and dma support for omap2/3 NAND driver
  • From: "Singh, Vimal" <IMCEAEX-_O=TI_OU=BD_CN=RECIPIENTS_CN=X0094262@xxxxxxxxxxxxxxxxx>
• [PATCH] DSPBRIDGE: Various compile warning fixes
  • From: Ameya Palande <ameya.palande@xxxxxxxxx>
• Re: [RFC][PATCH] OMAP3: add support for 2 SDRAM chip selects (was: Re: Beagleboard rev C memory timings & suspend/resume)
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 0/4]ARM: OMAP4: SMP: Patch series
  • From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
• List of kernel config options for correct pm operation
  • From: Elvis Dowson <elvis.dowson@xxxxxxx>
• What does CONFIG_SYSFS_DEPRECATED do?
  • From: Elvis Dowson <elvis.dowson@xxxxxxx>
• RE: [PATCH] RX51: Add support for SDRAM chip select 1
  • From: <Tero.Kristo@xxxxxxxxx>
• Re: [PATCH] [MTD] [NAND] Add prefetch and dma support for omap2/3 NAND driver
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] RX51: Add support for SDRAM chip select 1
  • From: Jean Pihet <jpihet@xxxxxxxxxx>
• [PATCH] RX51: Add support for SDRAM chip select 1
  • From: Tero Kristo <tero.kristo@xxxxxxxxx>
• RE: [PATCH] DSPBRIDGE: Compiler wanrning fix for unlocked_ioctl
  • From: "Menon, Nishanth" <nm@xxxxxx>
• Re: [PATCH] DSPBRIDGE: Compiler wanrning fix for unlocked_ioctl
  • From: Hiroshi DOYU <Hiroshi.DOYU@xxxxxxxxx>
• Re: [RFC][PATCH] OMAP3: add support for 2 SDRAM chip selects (was: Re: Beagleboard rev C memory timings & suspend/resume)
  • From: Grazvydas Ignotas <notasas@xxxxxxxxx>
• Re: Solution: N810 keyboard regression
  • From: Felipe Balbi <felipe.balbi@xxxxxxxxx>
• Re: [RFC][PATCH] OMAP3: add support for 2 SDRAM chip selects (was: Re: Beagleboard rev C memory timings & suspend/resume)
  • From: Jean Pihet <jpihet@xxxxxxxxxx>
• Re: [RFC][PATCH] OMAP3: add support for 2 SDRAM chip selects (was: Re: Beagleboard rev C memory timings & suspend/resume)
  • From: Jean Pihet <jpihet@xxxxxxxxxx>
• VS: [PATCH] OMAP3: PM: Fix the pwrdm_enable/disable_hdwr_sar funcs
  • From: Jokiniemi Kalle <Kalle.Jokiniemi@xxxxxxxxx>
• RE: [RFC][PATCH] OMAP3: add support for 2 SDRAM chip selects (was: Re: Beagleboard rev C memory timings & suspend/resume)
  • From: <Tero.Kristo@xxxxxxxxx>
• RE: [PATCH] DSPBRIDGE: Compiler wanrning fix for unlocked_ioctl
  • From: "Ramirez Luna, Omar" <omar.ramirez@xxxxxx>
• Re: Please help in adding ams-delta support to ASoC
  • From: Jarkko Nikula <jhnikula@xxxxxxxxx>
• Re: PM error: Powerdomain (core_pwddm) didn't enter target state 1
  • From: Elvis Dowson <elvis.dowson@xxxxxxx>
• Re: error message - SR1/SR2: VDD autocomp is not active
  • From: Elvis Dowson <elvis.dowson@xxxxxxx>
• error message - SR1/SR2: VDD autocomp is not active
  • From: Elvis Dowson <elvis.dowson@xxxxxxx>
• OMAP2+: omap_device: bug fix patch for omap_device_idle()/omap_device_shutdown()
  • From: Paul Walmsley <paul@xxxxxxxxx>
• Re: [Linux-fbdev-devel] [PATCH 01/20] omapfb: Add support for the Apollon LCD
  • From: Krzysztof Helt <krzysztof.h1@xxxxxxxxx>
• Re: OMAP: sporadic hard lock-up when GPIO edge-triggered interrupts occur too fast
  • From: Hugo Vincent <hugo.vincent@xxxxxxxxx>
• Re: [alsa-devel] Please help in adding ams-delta support to ASoC
  • From: Mark Brown <broonie@xxxxxxxxxxxxxxxxxxxxxxxxxxx>
• Re: Solution: N810 keyboard regression
  • From: "Luke-Jr" <luke@xxxxxxxxxx>
• Re: Problem creating an openembedded recipe for linux-omap3-2.6.30-rc8
  • From: Felipe Contreras <felipe.contreras@xxxxxxxxx>
• Re: Solution: N810 keyboard regression
  • From: Felipe Balbi <felipe.balbi@xxxxxxxxx>
• [PATCH] arm: omap: n810: set lm8323 size_y to 12
  • From: "Luke-Jr" <luke@xxxxxxxxxx>
• Solution: N810 keyboard regression
  • From: "Luke-Jr" <luke@xxxxxxxxxx>
• Problem creating an openembedded recipe for linux-omap3-2.6.30-rc8
  • From: Elvis Dowson <elvis.dowson@xxxxxxx>
• Re: [alsa-devel] Please help in adding ams-delta support to ASoC
  • From: Janusz Krzysztofik <jkrzyszt@xxxxxxxxxxxx>
• Re: [RFC][PATCH] OMAP3: add support for 2 SDRAM chip selects (was: Re: Beagleboard rev C memory timings & suspend/resume)
  • From: Grazvydas Ignotas <notasas@xxxxxxxxx>
• n800 can't mount rootfs
  • From: Kalle Valo <kalle.valo@xxxxxx>
• Where do the extra #include <mach/board-overo.h> come from in linux-omap3-2.6.29.bb recipe?
  • From: Elvis Dowson <elvis.dowson@xxxxxxx>
• Re: PM error: Powerdomain (core_pwddm) didn't enter target state 1
  • From: Koen Kooi <k.kooi@xxxxxxxxxxxxxxxxxx>
• Re: PM error: Powerdomain (core_pwddm) didn't enter target state 1
  • From: Rebecca Schultz Zavin <rebecca@xxxxxxxxxxx>
• RE: [PATCH] OMAP2/3 Avoid GPIO pending irq status been set after irq_disable
  • From: "Wang Sawsd-A24013" <cqwang@xxxxxxxxxxxx>
• Re: [PATCH] OMAP3: PM: Fix the pwrdm_enable/disable_hdwr_sar funcs
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• Re: [alsa-devel] Please help in adding ams-delta support to ASoC
  • From: Mark Brown <broonie@xxxxxxxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] OMAP3: PM: Fix the pwrdm_enable/disable_hdwr_sar funcs
  • From: Paul Walmsley <paul@xxxxxxxxx>
• Re: Please help in adding ams-delta support to ASoC
  • From: Janusz Krzysztofik <jkrzyszt@xxxxxxxxxxxx>
• RE: [PATCH 05/06] OMAP3: PM: Implement locking for any scratchpad access
  • From: Paul Walmsley <paul@xxxxxxxxx>
• Re: [PATCH] OMAP3: PM: Fix the pwrdm_enable/disable_hdwr_sar funcs
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 05/06] OMAP3: PM: Implement locking for any scratchpad access
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• RE: [PATCH 05/06] OMAP3: PM: Implement locking for any scratchpad access
  • From: "Woodruff, Richard" <r-woodruff2@xxxxxx>
• Re: [PATCH] OMAP2/3 Avoid GPIO pending irq status been set after irq_disable
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 05/06] OMAP3: PM: Implement locking for any scratchpad access
  • From: Paul Walmsley <paul@xxxxxxxxx>
• Re: Script for applying a set of patches from a folder
  • From: Elvis Dowson <elvis.dowson@xxxxxxx>
• Re: Script for applying a set of patches from a folder
  • From: Elvis Dowson <elvis.dowson@xxxxxxx>
• RE: Script for applying a set of patches from a folder
  • From: "Gadiyar, Anand" <gadiyar@xxxxxx>
• Re: [RFC][PATCH] OMAP3: add support for 2 SDRAM chip selects (was: Re: Beagleboard rev C memory timings & suspend/resume)
  • From: Paul Walmsley <paul@xxxxxxxxx>
• Re: [PATCH 00/07] pm: remove late/early platform driver pm callbacks
  • From: "Rafael J. Wysocki" <rjw@xxxxxxx>
• RE: [PATCH] OMAP2/3 Avoid GPIO pending irq status been set after irq_disable
  • From: "Wang Sawsd-A24013" <cqwang@xxxxxxxxxxxx>
• Re: Script for applying a set of patches from a folder
  • From: Elvis Dowson <elvis.dowson@xxxxxxx>
• Re: [RFC][PATCH] OMAP3: add support for 2 SDRAM chip selects (was: Re: Beagleboard rev C memory timings & suspend/resume)
  • From: Paul Walmsley <paul@xxxxxxxxx>
• Re: PM error: Powerdomain (core_pwddm) didn't enter target state 1
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• Re: PM error: Powerdomain (core_pwddm) didn't enter target state 1
  • From: Elvis Dowson <elvis.dowson@xxxxxxx>
• RE: [PATCH] DSPBRIDGE: Use GT_trace for CLk_Disable message
  • From: "Ramirez Luna, Omar" <omar.ramirez@xxxxxx>
• Re: Script for applying a set of patches from a folder
  • From: Elvis Dowson <elvis.dowson@xxxxxxx>
• Re: PM error: Powerdomain (core_pwddm) didn't enter target state 1
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• RE: PM error: Powerdomain (core_pwddm) didn't enter target state 1
  • From: "Wang Sawsd-A24013" <cqwang@xxxxxxxxxxxx>
• Re: [PATCH 04/20] omapfb: Add support for the Amstrad Delta LCD
  • From: Jonathan McDowell <noodles@xxxxxxxx>
• Re: [RFC][PATCH] OMAP3: add support for 2 SDRAM chip selects (was: Re: Beagleboard rev C memory timings & suspend/resume)
  • From: Jean Pihet <jpihet@xxxxxxxxxx>
• [[[Resend][Patch]]] New OMAP LDP supporting DSS2 device model
  • From: subbu31mani@xxxxxxxxx
• Re: Script for applying a set of patches from a folder
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• RE: Script for applying a set of patches from a folder
  • From: "Curran, Dominic" <dcurran@xxxxxx>
• Re: Please help in adding ams-delta support to ASoC
  • From: Jarkko Nikula <jhnikula@xxxxxxxxx>
• Re: Script for applying a set of patches from a folder
  • From: Jean Pihet <jpihet@xxxxxxxxxx>
• RE: [PATCH 05/06] OMAP3: PM: Implement locking for any scratchpad access
  • From: "Nayak, Rajendra" <rnayak@xxxxxx>
• RE: [PATCH] PM: Disable usb host HW save and restore
  • From: "Nayak, Rajendra" <rnayak@xxxxxx>
• [PATCHv3] DSPBRIDGE: Buffer size warning fixes
  • From: Ameya Palande <ameya.palande@xxxxxxxxx>
• [PATCH] OMAP3: PM: Fix the pwrdm_enable/disable_hdwr_sar funcs
  • From: Rajendra Nayak <rnayak@xxxxxx>
• [PATCHv2] DSPBRIDGE: Buffer size warning fixes
  • From: Ameya Palande <ameya.palande@xxxxxxxxx>
• Re: FW: [PATCH] DSPBRIDGE: Buffer size warning fixes
  • From: Ameya Palande <ameya.palande@xxxxxxxxx>
• Re: Script for applying a set of patches from a folder
  • From: Felipe Balbi <felipe.balbi@xxxxxxxxx>
• RE: [PATCH] [MTD] [NAND] Add prefetch and dma support for omap2/3 NAND driver
  • From: "Singh, Vimal" <IMCEAEX-_O=TI_OU=BD_CN=RECIPIENTS_CN=X0094262@xxxxxxxxxxxxxxxxx>
• Re: DSS porting problems
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxxxxx>
• Re: [PATCH 04/20] omapfb: Add support for the Amstrad Delta LCD
  • From: Janusz Krzysztofik <jkrzyszt@xxxxxxxxxxxx>
• Re: DSS porting problems
  • From: Gary Thomas <gary@xxxxxxxxxxxx>
• Script for applying a set of patches from a folder
  • From: Elvis Dowson <elvis.dowson@xxxxxxx>
• Re: [PATCH 04/20] omapfb: Add support for the Amstrad Delta LCD
  • From: Janusz Krzysztofik <jkrzyszt@xxxxxxxxxxxx>
• Re: Status of clock patches after mainline reset? Case: Beagle C2 and EHCI
  • From: Paul Walmsley <paul@xxxxxxxxx>
• [PATCH 3/3] OMAP2/3 MMC: initial conversion to omap_device
  • From: Paul Walmsley <paul@xxxxxxxxx>
• [PATCH 1/3] OMAP2/3/4 core: create omap_device layer
  • From: Paul Walmsley <paul@xxxxxxxxx>
• [PATCH 2/3] OMAP: MMC (core): split device registration by OMAP variant
  • From: Paul Walmsley <paul@xxxxxxxxx>
• [PATCH 0/3] omap_device implementation, and HSMMC example
  • From: Paul Walmsley <paul@xxxxxxxxx>
• [PATCH 8/8] OMAP2430/34xx HSMMC: add basic omap_hwmod entries for OMAP2430/34xx
  • From: Paul Walmsley <paul@xxxxxxxxx>
• [PATCH 6/8] OMAP2/3/4: create omap_hwmod layer
  • From: Paul Walmsley <paul@xxxxxxxxx>
• [PATCH 7/8] OMAP: omap_hwmod: call omap_hwmod initialization at boot
  • From: Paul Walmsley <paul@xxxxxxxxx>
• [PATCH 5/8] OMAP2/3/4 PRCM: add module IDLEST wait code
  • From: Paul Walmsley <paul@xxxxxxxxx>
• [PATCH 4/8] OMAP clock: associate MPU clocks with the mpu_clkdm
  • From: Paul Walmsley <paul@xxxxxxxxx>
• [PATCH 3/8] OMAP2/3 clock: ensure each clock has a unique name
  • From: Paul Walmsley <paul@xxxxxxxxx>
• [PATCH 1/8] OMAP2/3 board-*.c files: read bootloader configuration earlier
  • From: Paul Walmsley <paul@xxxxxxxxx>
• [PATCH 2/8] OMAP clock: add omap_clk_get_by_name()
  • From: Paul Walmsley <paul@xxxxxxxxx>
• [PATCH 0/8] implement omap_hwmod core, plus HSMMC example
  • From: Paul Walmsley <paul@xxxxxxxxx>
• Re: [PATCH 1/2] McSPI Slave and DMA,FIFO support
  • From: "Hemanth V" <hemanthv@xxxxxx>
• Re: [PATCH 02/07] dma: rework dw_dmac suspend_late()/resume_early()
  • From: Haavard Skinnemoen <haavard.skinnemoen@xxxxxxxxx>
• Re: [PATCH 02/07] dma: rework dw_dmac suspend_late()/resume_early()
  • From: Magnus Damm <magnus.damm@xxxxxxxxx>
• Re: DSS porting problems
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxxxxx>
• Re: [PATCH 02/07] dma: rework dw_dmac suspend_late()/resume_early()
  • From: Haavard Skinnemoen <haavard.skinnemoen@xxxxxxxxx>
• [PATCH 07/07] pm: remove platform device suspend_late()/resume_early()
  • From: Magnus Damm <magnus.damm@xxxxxxxxx>
• [PATCH 06/07] usb: rework musb suspend()/resume_early()
  • From: Magnus Damm <magnus.damm@xxxxxxxxx>
• [PATCH 05/07] i2c: rework i2c-s3c2410 suspend_late()/resume()
  • From: Magnus Damm <magnus.damm@xxxxxxxxx>
• [PATCH 04/07] i2c: rework i2c-pxa suspend_late()/resume_early()
  • From: Magnus Damm <magnus.damm@xxxxxxxxx>
• [PATCH 03/07] dma: rework txx9dmac suspend_late()/resume_early()
  • From: Magnus Damm <magnus.damm@xxxxxxxxx>
• [PATCH 02/07] dma: rework dw_dmac suspend_late()/resume_early()
  • From: Magnus Damm <magnus.damm@xxxxxxxxx>
• [PATCH 01/07] arm: rework omap suspend_late()/resume_early()
  • From: Magnus Damm <magnus.damm@xxxxxxxxx>
• [PATCH 00/07] pm: remove late/early platform driver pm callbacks
  • From: Magnus Damm <magnus.damm@xxxxxxxxx>
• PM error: Powerdomain (core_pwddm) didn't enter target state 1
  • From: Elvis Dowson <elvis.dowson@xxxxxxx>
• Re: DSP MMU Fault
  • From: Ramesh Gupta Guntha <grgupta77@xxxxxxxxx>
• Re: [PATCH][RFC] OMAP4: I2C Support for OMAP_4430SDP
  • From: Nishanth Menon <menon.nishanth@xxxxxxxxx>
• Early gpio_request on LDP for LCD fails
  • From: "Venkatesh, Subbu" <subbu.wrs@xxxxxx>
• RE: DSS2: Compilation Error on Git tree http://www.bat.org/~tomba/git/linux-omap-dss.git
  • From: "Venkatesh, Subbu" <subbu.wrs@xxxxxx>
• Re: [PATCH 00/06] OMAP3430 Errata, defect fixes and optimizations
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 00/06] OMAP3430 Errata, defect fixes and optimizations
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 05/06] OMAP3: PM: Implement locking for any scratchpad access
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] OMAP2/3 Avoid GPIO pending irq status been set after irq_disable
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• [RFC] [PATCH] input: export gpio-keys driven switch status over gpiolib sysfs
  • From: Janusz Krzysztofik <jkrzyszt@xxxxxxxxxxxx>
• RE: DSP MMU Fault
  • From: "Kanigeri, Hari" <h-kanigeri2@xxxxxx>