Rajendra, Richard, Hoping you can shed some light, or give me some direction on where to debug this further... With the latest PM branch, I've notice that off-while idle isn't working on the SDP, but the same kernel works fine on the RX51. RET-while-idle works fine on both. This is with CPUidle disabled, so just using the default idle where MPU and CORE are changed together. More specifically, it seems to be the UART1 (CORE) console that never comes back from off-while-idle, but the UART3 (PER) console on RX51 works. On SDP, if I # echo 1 > /sys/power/enable_off_mode # echo 1 > /sys/power/voltage_off_while_idle # echo 1 > /sys/power/sleep_while_idle After the UART inactivty timeout of 5 seconds, I start to see the sys_off_mode LED toggling between red and green with system timer wakeups. If I then push a key on the UART1 console, the LED goes green, stays for the 5 second UART inactivity and then goes back to toggling red/green again. However, I never get my console back and never see the characters on my console. If I keep typing, I keep the system from going back off (based on sys_off_mode LED) and as soon as I stop typing long enough for the inactivity timer to expiere (5 seconds) it goes back into off. Any ideas what's going on here? On RX51, the same thing works using UART3. Kevin -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
