Thanks Vikram. I'm able to move further in the booting process using arm-2008q3-72. However, I'm still getting a kernel panic and I'm not sure why. If you or some others have experienced this please let me know.
1656148 bytes read
## Booting image at 80c00000 ...
Image Name: Linux-2.6.30-omap1-05864-gfc3c45
Image Type: ARM Linux Kernel Image (uncompressed)
Data Size: 1656084 Bytes = 1.6 MB
Load Address: 80008000
Entry Point: 80008000
Verifying Checksum ... OK
OK
Starting kernel ...
Linux version 2.6.30-omap1-05864-gfc3c45c (nipuna@UTA0864305) (gcc version 4.3.2eeing init
(Sourcery G++ Lite 2008q3-72) ) #1 Tue Jun 16 16:52:10 CDT 2009
ps: invalid option -- ale or directorychitectu
CPU: ARMv7 Processor [411fc083] revision 3 (ARMv7), cr=10c5387f11:27:58 PDT) multi-call binary
CPU: VIPT nonaliasing data cache, VIPT nonaliasing instruction cachewlan0 ;
Report process status
Machine: OMAP Zoom2 board
w
Memory policy: ECC disabled, Data cache writeback
/etc/
OMAP3430 ES3.1line 232: echo
SRAM: Mapped pa 0x40200000 to va 0xd7000000 size: 0x100000
twl403
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 65024
Error for
Starting GPE display manager: gpe-dm:blo
Total of 96 interrupts on 1 active controller
INIT: Sending processes the TERM signalt
OMAP34xx GPIO hardware version 2.5
PID hash table entries: 1024 (order: 10, 4096 bytes)ng Dropbear SSH server: stopped /usr/sbin/dropbear (
OMAP clockevent source: GPTIMER1 at 32768 Hz
modprobe: F
Console: colour dummy device 80x30.6.27.10-o
Dentry cache hash table entries: 32768 (order: 5, 1
net_namespace: 520 bytes
e
Stoppin
NET: Registered protocol family 16id 1408)ove <pkg|regexp>
Failed to request GPIO158 for smsc911x IRQ
stopped klogd (pid 1410)h fi
OMAP DMA hardware revision 4.0
do
bio: create slab <bio-0> at 0agerarting advanced power man
i2c_omap i2c_omap.1: bus 1 rev3.12 at 2600 kHz
ps: invalid option -- aport in
*[fail]
y failur
TCP: Hash tables configured (established 8192 bind 8192)e pvrsrvkm does not exist in /proc/modules does not exis
TCP reno registered
NET: Registered protocol family 1
NetWinder Floating Point Emulator V0.97 (double precision)oryt exis
io scheduler noop registered
FATAL: Co
io scheduler anticipatory registered (default)
mknod: missing operand after
io scheduler deadline registeredble
io scheduler cfq registered
Try `mknod --help'
Serial: 8250/16550 driver, 4 ports, IRQ sharing enabledopened..27.10-omap1/mo
W
serial8250.0: ttyS0 at MMIO 0x4806a000 (irq = 72) is a ST16654
Sending all processes the TERM signal...0x48004B40
Driver 'sd' needs updating - please use bus_type methods
smsc911x: Driver version 2008-10-21.
smsc911x-mdio: probed
eth0: attached PHY driver [SMSC LAN8700] (mii_bus:phy_addr=ffffffff:01, irq=-1)
net eth0: MAC Address: 00:08:ee:03:12:29
Driver for 1-wire Dallas network protocol.
Advanced Linux Sound Architecture Driver Version 1.0.20.
ALSA device list:
No soundcards found.
TCP cubic registered
Initializing XFRM netlink socket
NET: Registered protocol family 17
NET: Registered protocol family 15
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 1
drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
Waiting 1sec before mounting root device...
Root-NFS: No NFS server available, giving up.
VFS: Unable to mount root fs via NFS, trying floppy.
VFS: Cannot open root device "mmcblk0p2" or unknown-block(2,0)
Please append a correct "root=" boot option; here are the available partitions:
Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(2,0)
-----Original Message-----
From: Pandita, Vikram
Sent: Tuesday, June 16, 2009 1:15 PM
To: Gunasekera, Nipuna; linux-omap-open-source@xxxxxxxxxxxxxx
Subject: RE: Linux OMAP 2.6.30 kernel not booting
There used to be tool chain issue with older toolchain.
On moving to arm-2008q3-72 it was solved.
Also the mailing list is: linux-omap@xxxxxxxxxxxxxxx
And not the one you specified.
>-----Original Message-----
>From: linux-omap-open-source-bounces@xxxxxxxxxxxxxx [mailto:linux-omap-open-source-
>bounces@xxxxxxxxxxxxxx] On Behalf Of Gunasekera, Nipuna
>Sent: Tuesday, June 16, 2009 1:11 PM
>To: linux-omap-open-source@xxxxxxxxxxxxxx
>Subject: Linux OMAP 2.6.30 kernel not booting
>
>Hi all,
>
>I'm trying to use the Linux OMAP 2.6.30 kernel from here to boot an OMAP Zoom2 device:
>http://git.kernel.org/?p=linux/kernel/git/tmlind/linux-omap-2.6.git
>
>However, it seems to get stuck as indicated below (in red):
>OMAP34XX ZOOM2 # boot
>
>1653216 bytes read
>## Booting image at 80c00000 ...
> Image Name: Linux-2.6.30-omap1-05863-g1755d1
> Image Type: ARM Linux Kernel Image (uncompressed)
> Data Size: 1653152 Bytes = 1.6 MB
> Load Address: 80008000
> Entry Point: 80008000
> Verifying Checksum ... OK
>OK
>
>Starting kernel ...
>
>My environment is set as indicated below:
>OMAP34XX ZOOM2 # printenv
>bootdelay=3
>baudrate=115200
>ipaddr=128.247.77.90
>serverip=128.247.77.158
>netmask=255.255.254.0
>bootfile="uImage"
>bootargs=console=ttyS3,115200n8 root=/dev/mmcblk0p2 rw rootdelay=1 mem=256M init
>=/init
>bootcmd=mmcinit; fatload mmc 0 0x80c00000 uImage; bootm 0x80c00000
>stdin=serial
>stdout=serial
>stderr=serial
>Environment size: 308/131068 bytes
>
>The Zoom2 boots fine when I use 2.6.27 kernel from omapzoom.org:
>http://git.omapzoom.org/?p=repo/omapkernel.git;a=summary
>
>What am I missing to get the 2.6.30 kernel from kernel.org to boot?
>
>Thanks -Nipuna
>
>
>
>_______________________________________________
>Linux-omap-open-source mailing list
>Linux-omap-open-source@xxxxxxxxxxxxxx
>http://linux.omap.com/mailman/listinfo/linux-omap-open-source
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
