The function omap3evm_flash_init() earlier implemented
in board-omap3evm-flash.c did not find its way into the
board-omap3evm.c during the latest migration.
This patch brings in the earlier implementation with
appropriate changes as necessary on current head.
Signed-off-by: Sanjeev Premi <premi@xxxxxx>
---
arch/arm/mach-omap2/board-omap3evm.c | 176 +++++++++++++++++++++++++++++++++-
1 files changed, 175 insertions(+), 1 deletions(-)
diff --git a/arch/arm/mach-omap2/board-omap3evm.c b/arch/arm/mach-omap2/board-omap3evm.c
index 1b7a797..5084b67 100644
--- a/arch/arm/mach-omap2/board-omap3evm.c
+++ b/arch/arm/mach-omap2/board-omap3evm.c
@@ -26,23 +26,197 @@
#include <linux/spi/ads7846.h>
#include <linux/i2c/twl4030.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/nand.h>
+
#include <mach/hardware.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
+#include <asm/mach/flash.h>
+#include <mach/common.h>
#include <mach/board.h>
#include <mach/mux.h>
+#include <mach/gpmc.h>
+#include <mach/nand.h>
+#include <mach/onenand.h>
#include <mach/usb.h>
-#include <mach/common.h>
#include <mach/mcspi.h>
#include <mach/keypad.h>
#include "sdram-micron-mt46h32m32lf-6.h"
#include "mmc-twl4030.h"
+#define GPMC_CS0_BASE 0x60
+#define GPMC_CS_SIZE 0x30
+
#define OMAP3_EVM_TS_GPIO 175
+/*
+ * MTD - NAND, OneNAND
+ */
+#define NAND_BLOCK_SIZE SZ_128K
+
+static struct mtd_partition omap3evm_nand_partitions[] = {
+ /* All the partition sizes are listed in terms of NAND block size */
+ {
+ .name = "xloader-nand",
+ .offset = 0,
+ .size = 4 * NAND_BLOCK_SIZE,
+ .mask_flags = MTD_WRITEABLE
+ },
+ {
+ .name = "uboot-nand",
+ .offset = MTDPART_OFS_APPEND,
+ .size = 14 * NAND_BLOCK_SIZE,
+ .mask_flags = MTD_WRITEABLE
+ },
+ {
+ .name = "params-nand",
+
+ .offset = MTDPART_OFS_APPEND,
+ .size = 2 * NAND_BLOCK_SIZE
+ },
+ {
+ .name = "linux-nand",
+ .offset = MTDPART_OFS_APPEND,
+ .size = 40 * NAND_BLOCK_SIZE,
+ },
+ {
+ .name = "jffs2-nand",
+ .size = MTDPART_SIZ_FULL,
+ .offset = MTDPART_OFS_APPEND,
+ },
+};
+
+static struct omap_nand_platform_data omap3evm_nand_data = {
+ .parts = omap3evm_nand_partitions,
+ .nr_parts = ARRAY_SIZE(omap3evm_nand_partitions),
+ .nand_setup = NULL,
+ .dma_channel = -1, /* disable DMA in OMAP NAND driver */
+ .nand_setup = NULL,
+ .dev_ready = NULL,
+};
+
+static struct resource omap3evm_nand_resource = {
+ .flags = IORESOURCE_MEM,
+};
+
+static struct platform_device omap3evm_nand_device = {
+ .name = "omap2-nand",
+ .id = 0,
+ .dev = {
+ .platform_data = &omap3evm_nand_data,
+ },
+ .num_resources = 1,
+ .resource = &omap3evm_nand_resource,
+};
+
+#define ONENAND_MAP 0x20000000
+#define ONENAND_BLOCK_SIZE (64*2048)
+
+static struct mtd_partition omap3evm_onenand_partitions[] = {
+ {
+ .name = "xloader-onenand",
+ .offset = 0,
+ .size = 4 * ONENAND_BLOCK_SIZE,
+ .mask_flags = MTD_WRITEABLE
+ },
+ {
+ .name = "uboot-onenand",
+ .offset = MTDPART_OFS_APPEND,
+ .size = 15 * ONENAND_BLOCK_SIZE,
+ .mask_flags = MTD_WRITEABLE
+ },
+ {
+ .name = "params-onenand",
+ .offset = MTDPART_OFS_APPEND,
+ .size = 1 * ONENAND_BLOCK_SIZE,
+ },
+ {
+ .name = "linux-onenand",
+ .offset = MTDPART_OFS_APPEND,
+ .size = 40 * ONENAND_BLOCK_SIZE,
+ },
+ {
+ .name = "jffs2-onenand",
+ .offset = MTDPART_OFS_APPEND,
+ .size = MTDPART_SIZ_FULL,
+ },
+};
+
+static struct omap_onenand_platform_data omap3evm_onenand_data = {
+ .parts = omap3evm_onenand_partitions,
+ .nr_parts = ARRAY_SIZE(omap3evm_onenand_partitions),
+ .onenand_setup = NULL,
+ .dma_channel = -1, /* disable DMA in OMAP OneNAND driver */
+};
+
+static struct platform_device omap3evm_onenand_device = {
+ .name = "omap2-onenand",
+ .id = -1,
+ .dev = {
+ .platform_data = &omap3evm_onenand_data,
+ },
+};
+
+void __init omap3evm_flash_init(void)
+{
+ u8 cs = 0;
+ u8 onenandcs = GPMC_CS_NUM + 1, nandcs = GPMC_CS_NUM + 1;
+ u32 gpmc_base_add = OMAP34XX_GPMC_VIRT;
+
+ while (cs < GPMC_CS_NUM) {
+ u32 ret = 0;
+ ret = gpmc_cs_read_reg(cs, GPMC_CS_CONFIG1);
+
+ /*
+ * xloader/Uboot would have programmed the NAND/oneNAND
+ * base address for us This is a ugly hack. The proper
+ * way of doing this is to pass the setup of u-boot up
+ * to kernel using kernel params - something on the
+ * lines of machineID. Check if NAND/oneNAND is configured
+ */
+ if ((ret & 0xC00) == 0x800) {
+ /* Found it!! */
+ if (nandcs > GPMC_CS_NUM)
+ nandcs = cs;
+ } else {
+ ret = gpmc_cs_read_reg(cs, GPMC_CS_CONFIG7);
+ if ((ret & 0x3F) == (ONENAND_MAP >> 24))
+ onenandcs = cs;
+ }
+ cs++;
+ }
+ if ((nandcs > GPMC_CS_NUM) && (onenandcs > GPMC_CS_NUM)) {
+ printk(KERN_INFO "NAND/OneNAND: Unable to find configuration "
+ " in GPMC\n ");
+ return;
+ }
+
+ if (nandcs < GPMC_CS_NUM) {
+ omap3evm_nand_data.cs = nandcs;
+ omap3evm_nand_data.gpmc_cs_baseaddr = (void *)(gpmc_base_add +
+ GPMC_CS0_BASE + nandcs*GPMC_CS_SIZE);
+ omap3evm_nand_data.gpmc_baseaddr = (void *) (gpmc_base_add);
+
+ if (platform_device_register(&omap3evm_nand_device) < 0) {
+ printk(KERN_ERR "Unable to register NAND device\n");
+ }
+ }
+
+ if (onenandcs < GPMC_CS_NUM) {
+ omap3evm_onenand_data.cs = onenandcs;
+ if (platform_device_register(&omap3evm_onenand_device) < 0)
+ printk(KERN_ERR "Unable to register OneNAND device\n");
+ }
+}
+
+/*
+ * Ethernet
+ */
#define OMAP3EVM_ETHR_START 0x2c000000
#define OMAP3EVM_ETHR_SIZE 1024
#define OMAP3EVM_ETHR_GPIO_IRQ 176
--
1.6.2.2
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
