Hello, I tested linux-omap (commit 151c7a7fc) on n800 and it can't mount rootfs anymore. Below is the full bootlog. Unfortunately I don't have time to debug this right now, but I can test patches if needed. [ 0.000000] Linux version 2.6.30-rc8-omap1 (kvalo@tikku) (gcc version 4.3.2 (Sourcery G++ Lite 2008q3-66) ) #2 Sat Jun 6 10:28:29 EEST 2009 [ 0.000000] CPU: ARMv6-compatible processor [4107b362] revision 2 (ARMv6TEJ), cr=00c5387f [ 0.000000] CPU: VIPT aliasing data cache, VIPT aliasing instruction cache [ 0.000000] Machine: Nokia N800 [ 0.000000] Memory policy: ECC disabled, Data cache writeback [ 0.000000] OMAP2420<6> [ 0.000000] SRAM: Mapped pa 0x40200000 to va 0xe3000000 size: 0x100000 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 32512 [ 0.000000] Kernel command line: root=1f03 rootfstype=jffs2 [ 0.000000] NR_IRQS:368 [ 0.000000] Clocking rate (Crystal/DPLL/MPU): 19.2/658/329 MHz [ 0.000000] GPMC revision 2.0 [ 0.000000] IRQ: Found an INTC at 0xd80fe000 (revision 2.0) with 96 interrupts [ 0.000000] Total of 96 interrupts on 1 active controller [ 0.000000] OMAP242x GPIO hardware version 1.8 [ 0.000000] PID hash table entries: 512 (order: 9, 2048 bytes) [ 0.000000] OMAP clockevent source: GPTIMER1 at 32000 Hz [ 0.000000] Console: colour dummy device 80x30 [ 0.000000] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes) [ 0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes) [ 0.000000] Memory: 64MB 64MB = 128MB total [ 0.000000] Memory: 126392KB available (2896K code, 238K data, 120K init, 0K highmem) [ 0.000000] Calibrating delay loop... 320.37 BogoMIPS (lpj=1253376) [ 0.000000] Security Framework initialized [ 0.000000] Mount-cache hash table entries: 512 [ 0.000000] CPU: Testing write buffer coherency: ok [ 0.000000] net_namespace: 668 bytes [ 0.000000] NET: Registered protocol family 16 [ 0.000000] TUSB 6010 [ 0.000000] kobject (c031e048): tried to init an initialized object, something is seriously wrong. [ 0.000000] [<c002c674>] (unwind_backtrace+0x0/0xdc) from [<c0103654>] (kobject_init+0x38/0x70) [ 0.000000] [<c0103654>] (kobject_init+0x38/0x70) from [<c013fbfc>] (device_initialize+0x20/0x70) [ 0.000000] [<c013fbfc>] (device_initialize+0x20/0x70) from [<c0143408>] (platform_device_register+0x10/0x1c) [ 0.000000] [<c0143408>] (platform_device_register+0x10/0x1c) from [<c000e7a0>] (gpmc_onenand_init+0x4c/0x74) [ 0.000000] [<c000e7a0>] (gpmc_onenand_init+0x4c/0x74) from [<c000b13c>] (customize_machine+0x18/0x24) [ 0.000000] [<c000b13c>] (customize_machine+0x18/0x24) from [<c00262bc>] (do_one_initcall+0x54/0x194) [ 0.000000] [<c00262bc>] (do_one_initcall+0x54/0x194) from [<c00083b8>] (kernel_init+0x70/0xe4) [ 0.000000] [<c00083b8>] (kernel_init+0x70/0xe4) from [<c004d498>] (do_exit+0x0/0x580) [ 0.000000] [<c004d498>] (do_exit+0x0/0x580) from [<00000001>] (0x1) [ 0.000000] ------------[ cut here ]------------ [ 0.000000] WARNING: at fs/sysfs/dir.c:487 sysfs_add_one+0x68/0x90() [ 0.000000] sysfs: cannot create duplicate filename '/devices/platform/omap2-onenand' [ 0.000000] Modules linked in: [ 0.000000] [<c002c674>] (unwind_backtrace+0x0/0xdc) from [<c004a974>] (warn_slowpath_common+0x48/0x60) [ 0.000000] [<c004a974>] (warn_slowpath_common+0x48/0x60) from [<c004a9c4>] (warn_slowpath_fmt+0x24/0x30) [ 0.000000] [<c004a9c4>] (warn_slowpath_fmt+0x24/0x30) from [<c00cfd3c>] (sysfs_add_one+0x68/0x90) [ 0.000000] [<c00cfd3c>] (sysfs_add_one+0x68/0x90) from [<c00d02e4>] (create_dir+0x48/0x98) [ 0.000000] [<c00d02e4>] (create_dir+0x48/0x98) from [<c00d036c>] (sysfs_create_dir+0x38/0x54) [ 0.000000] [<c00d036c>] (sysfs_create_dir+0x38/0x54) from [<c0103948>] (kobject_add_internal+0xb8/0x18c) [ 0.000000] [<c0103948>] (kobject_add_internal+0xb8/0x18c) from [<c0103b94>] (kobject_add+0x4c/0x5c) [ 0.000000] [<c0103b94>] (kobject_add+0x4c/0x5c) from [<c013ffa4>] (device_add+0xac/0x554) [ 0.000000] [<c013ffa4>] (device_add+0xac/0x554) from [<c01433a0>] (platform_device_add+0xec/0x144) [ 0.000000] [<c01433a0>] (platform_device_add+0xec/0x144) from [<c000e7a0>] (gpmc_onenand_init+0x4c/0x74) [ 0.000000] [<c000e7a0>] (gpmc_onenand_init+0x4c/0x74) from [<c000b13c>] (customize_machine+0x18/0x24) [ 0.000000] [<c000b13c>] (customize_machine+0x18/0x24) from [<c00262bc>] (do_one_initcall+0x54/0x194) [ 0.000000] [<c00262bc>] (do_one_initcall+0x54/0x194) from [<c00083b8>] (kernel_init+0x70/0xe4) [ 0.000000] [<c00083b8>] (kernel_init+0x70/0xe4) from [<c004d498>] (do_exit+0x0/0x580) [ 0.000000] [<c004d498>] (do_exit+0x0/0x580) from [<00000001>] (0x1) [ 0.000000] ---[ end trace 1b75b31a2719ed1c ]--- [ 0.000000] kobject_add_internal failed for omap2-onenand with -EEXIST, don't try to register things with the same name in the same directory. [ 0.000000] [<c002c674>] (unwind_backtrace+0x0/0xdc) from [<c01039d4>] (kobject_add_internal+0x144/0x18c) [ 0.000000] [<c01039d4>] (kobject_add_internal+0x144/0x18c) from [<c0103b94>] (kobject_add+0x4c/0x5c) [ 0.000000] [<c0103b94>] (kobject_add+0x4c/0x5c) from [<c013ffa4>] (device_add+0xac/0x554) [ 0.000000] [<c013ffa4>] (device_add+0xac/0x554) from [<c01433a0>] (platform_device_add+0xec/0x144) [ 0.000000] [<c01433a0>] (platform_device_add+0xec/0x144) from [<c000e7a0>] (gpmc_onenand_init+0x4c/0x74) [ 0.000000] [<c000e7a0>] (gpmc_onenand_init+0x4c/0x74) from [<c000b13c>] (customize_machine+0x18/0x24) [ 0.000000] [<c000b13c>] (customize_machine+0x18/0x24) from [<c00262bc>] (do_one_initcall+0x54/0x194) [ 0.000000] [<c00262bc>] (do_one_initcall+0x54/0x194) from [<c00083b8>] (kernel_init+0x70/0xe4) [ 0.000000] [<c00083b8>] (kernel_init+0x70/0xe4) from [<c004d498>] (do_exit+0x0/0x580) [ 0.000000] [<c004d498>] (do_exit+0x0/0x580) from [<00000001>] (0x1) [ 0.000000] Unable to register OneNAND device [ 3.734191] OMAP DMA hardware revision 2.0 [ 3.775543] bio: create slab <bio-0> at 0 [ 3.776977] Tahvo/Betty driver initialising [ 3.778106] Betty v2.1 found [ 3.778808] Retu/Vilma driver initialising [ 3.779998] Vilma v1.5 found [ 3.783935] OMAP STI support loaded (HW v1.0) [ 3.794067] i2c_omap i2c_omap.1: bus 1 rev3.4 at 400 kHz [ 3.809356] i2c_omap i2c_omap.2: bus 2 rev3.4 at 400 kHz [ 3.813385] SCSI subsystem initialized [ 3.818634] usbcore: registered new interface driver usbfs [ 3.819580] usbcore: registered new interface driver hub [ 3.820312] usbcore: registered new device driver usb [ 3.824432] Bluetooth: Core ver 2.15 [ 3.825225] NET: Registered protocol family 31 [ 3.825256] Bluetooth: HCI device and connection manager initialized [ 3.825286] Bluetooth: HCI socket layer initialized [ 3.830200] musb_hdrc: version 6.0, tusb-omap-dma, otg (peripheral+host), debug=0 [ 3.832275] Switched to NOHz mode on CPU #0 [ 3.840057] tusb: prcm2.0 int2.0 gpio2.0 dma2.0 dieid0 rev2.0 [ 3.840118] drivers/usb/musb/tusb6010.c musb_platform_disable: dma still active [ 3.841156] musb_hdrc: USB OTG mode controller at c8808000 using DMA, IRQ 218 [ 3.842285] NET: Registered protocol family 2 [ 3.842620] IP route cache hash table entries: 1024 (order: 0, 4096 bytes) [ 3.843475] TCP established hash table entries: 4096 (order: 3, 32768 bytes) [ 3.843750] TCP bind hash table entries: 4096 (order: 2, 16384 bytes) [ 3.843994] TCP: Hash tables configured (established 4096 bind 4096) [ 3.844024] TCP reno registered [ 3.844390] NET: Registered protocol family 1 [ 3.848571] NetWinder Floating Point Emulator V0.97 (double precision) [ 3.852691] JFFS2 version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc. [ 3.853881] msgmni has been set to 247 [ 3.854187] io scheduler noop registered (default) [ 3.855072] omapfb: ls041y3 rev 87 LCD detected [ 3.855377] omapfb: configured for panel ls041y3 [ 3.869232] omapfb: DISPC version 2.0 initialized [ 3.869354] omapfb: RFBI version 1.0 initialized [ 3.887237] omapfb: s1d13744 LCD controller rev 0 initialized (CNF pins 3) [ 3.887390] omapfb omapfb: s1d1374x: setting update mode to manual [ 3.889587] omapfb: Framebuffer initialized. Total vram 2310144 planes 3 [ 3.889648] omapfb: Pixclock 21940 kHz hfreq 24.9 kHz vfreq 51.0 Hz [ 3.928344] Retu power button driver initialized [ 3.928375] retu: Registering interrupt 0 for device PwrOnX [ 3.929351] input: retu-pwrbutton as /class/input/input0 [ 3.930541] retu: Registering interrupt 2 for device RTCS [ 3.930694] retu: Registering interrupt 5 for device RTCA [ 3.932159] Retu watchdog driver initialized [ 3.932220] Retu/Vilma headset driver initializing [ 3.933166] input: retu-headset as /class/input/input1 [ 3.933288] retu: Registering interrupt 6 for device hookdet [ 3.933990] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 3.960388] serial8250.0: ttyS0 at MMIO 0x4806e000 (irq = 74) is a ST16654 [ 3.960479] console [ttyS0] enabled [ 4.768798] brd: module loaded [ 4.782043] loop: module loaded [ 4.786315] Menelaus rev 2.2 [ 4.802490] Driver 'sd' needs updating - please use bus_type methods [ 4.809509] PPP generic driver version 2.4.2 [ 4.814849] PPP Deflate Compression module registered [ 4.820037] PPP BSD Compression module registered [ 4.824829] tun: Universal TUN/TAP device driver, 1.6 [ 4.829925] tun: (C) 1999-2004 Max Krasnyansky <maxk@xxxxxxxxxxxx> [ 4.837524] OneNAND driver initializing [ 4.842041] TSC2301 driver initializing [ 4.857147] input: Internal keypad as /class/input/input2 [ 4.863983] input: TSC2301 touchscreen as /class/input/input3 [ 4.870269] usbmon: debugfs is not available [ 4.874664] Initializing USB Mass Storage driver... [ 4.880187] usbcore: registered new interface driver usb-storage [ 4.886260] USB Mass Storage support registered. [ 4.891510] usbcore: registered new interface driver libusual [ 4.897949] usbcore: registered new interface driver usbtest [ 4.904357] mice: PS/2 mouse device common for all mice [ 4.912719] TSC2005 driver initializing [ 4.917083] Linux video capture interface: v2.00 [ 4.924041] OMAP Watchdog Timer Rev 0x11: initial timeout 60 sec [ 5.005096] omap_pwm_led omap_pwm_led: OMAP PWM LED (keypad) at GP timer 10/9 [ 5.013275] Registered led device: keypad [ 5.030822] usbcore: registered new interface driver usbhid [ 5.036560] usbhid: v2.6:USB HID core driver [ 5.045349] Advanced Linux Sound Architecture Driver Version 1.0.20. [ 5.051849] mmci-omap mmci-omap.0: command timeout (CMD8) [ 5.057312] ALSA device list: [ 5.060424] No soundcards found. [ 5.064178] ip_tables: (C) 2000-2006 Netfilter Core Team [ 5.069702] TCP cubic registered [ 5.072967] NET: Registered protocol family 17 [ 5.077545] Bluetooth: L2CAP ver 2.13 [ 5.081237] Bluetooth: L2CAP socket layer initialized [ 5.086395] Bluetooth: SCO (Voice Link) ver 0.6 [ 5.091003] Bluetooth: SCO socket layer initialized [ 5.096191] Bluetooth: RFCOMM socket layer initialized [ 5.101440] mmci-omap mmci-omap.0: command timeout (CMD5) [ 5.106994] Bluetooth: RFCOMM TTY layer initialized [ 5.111938] mmci-omap mmci-omap.0: command timeout (CMD5) [ 5.117462] Bluetooth: RFCOMM ver 1.11 [ 5.121307] mmci-omap mmci-omap.0: command timeout (CMD5) [ 5.126739] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 5.132141] mmci-omap mmci-omap.0: command timeout (CMD5) [ 5.137634] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 5.144348] Disabling unused clock "uart2_fck" [ 5.148925] mmci-omap mmci-omap.0: command timeout (CMD55) [ 5.154541] Disabling unused clock "uart2_ick" [ 5.159027] Disabling unused clock "uart1_fck" [ 5.163543] Disabling unused clock "uart1_ick" [ 5.168029] Disabling unused clock "gpt12_fck" [ 5.172546] Disabling unused clock "gpt12_ick" [ 5.177032] Disabling unused clock "gpt11_fck" [ 5.181518] Disabling unused clock "gpt11_ick" [ 5.186035] Disabling unused clock "gpt8_fck" [ 5.190429] Disabling unused clock "gpt8_ick" [ 5.194824] Disabling unused clock "gpt7_fck" [ 5.199218] Disabling unused clock "gpt7_ick" [ 5.203643] Disabling unused clock "gpt6_fck" [ 5.208068] Disabling unused clock "gpt6_ick" [ 5.212463] Disabling unused clock "gpt5_fck" [ 5.216857] Disabling unused clock "gpt5_ick" [ 5.221252] Disabling unused clock "gpt4_fck" [ 5.225677] Disabling unused clock "gpt4_ick" [ 5.230072] Disabling unused clock "gpt3_fck" [ 5.234466] Disabling unused clock "gpt3_ick" [ 5.238891] Disabling unused clock "gpt2_fck" [ 5.243286] Disabling unused clock "gpt2_ick" [ 5.247711] Disabling unused clock "dss2_fck" [ 5.252136] Bootup reason: pwr_key [ 5.255676] OMAP GPIO switch handler initializing [ 5.261688] mmci-omap mmci-omap.0: command timeout (CMD55) [ 5.268341] mmci-omap mmci-omap.0: command timeout (CMD55) [ 5.274780] mmci-omap mmci-omap.0: command timeout (CMD55) [ 5.281158] mmci-omap mmci-omap.0: command timeout (CMD1) [ 5.287536] headphone (GPIO 107) is now disconnected [ 5.292541] cam_turn (GPIO 12) is now inactive [ 5.297088] cam_act (GPIO 95) is now inactive [ 5.301605] bat_cover (GPIO 110) is now closed [ 5.306091] VFP support v0.3: implementor 41 architecture 1 part 20 variant b rev 2 [ 5.391265] mmci-omap mmci-omap.0: command timeout (CMD8) [ 5.396759] mmci-omap mmci-omap.0: command timeout (CMD8) [ 5.402526] omap24xxcam omap24xxcam: sensor is tcm825x [ 5.407714] mmci-omap mmci-omap.0: command timeout (CMD5) [ 5.413848] mmci-omap mmci-omap.0: command timeout (CMD5) [ 5.419311] mmci-omap mmci-omap.0: command timeout (CMD5) [ 5.425415] mmci-omap mmci-omap.0: command timeout (CMD5) [ 5.431549] mmci-omap mmci-omap.0: command timeout (CMD5) [ 5.436981] mmci-omap mmci-omap.0: command timeout (CMD5) [ 5.443237] mmci-omap mmci-omap.0: command timeout (CMD55) [ 5.448760] mmci-omap mmci-omap.0: command timeout (CMD55) [ 5.454986] mmci-omap mmci-omap.0: command timeout (CMD55) [ 5.460540] mmci-omap mmci-omap.0: command timeout (CMD55) [ 5.466796] mmci-omap mmci-omap.0: command timeout (CMD55) [ 5.472320] mmci-omap mmci-omap.0: command timeout (CMD55) [ 5.478546] mmci-omap mmci-omap.0: command timeout (CMD55) [ 5.484100] mmci-omap mmci-omap.0: command timeout (CMD55) [ 5.490478] mmci-omap mmci-omap.0: command timeout (CMD1) [ 5.495941] mmci-omap mmci-omap.0: command timeout (CMD1) [ 5.520629] omap24xxcam omap24xxcam: registered device video0 [ 5.527893] VFS: Cannot open root device "1f03" or unknown-block(31,3) [ 5.534484] Please append a correct "root=" boot option; here are the available partitions: [ 5.542999] Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(31,3) [ 5.551452] [<c002c674>] (unwind_backtrace+0x0/0xdc) from [<c024e4f0>] (panic+0x40/0x108) [ 5.559814] [<c024e4f0>] (panic+0x40/0x108) from [<c0008e08>] (mount_block_root+0x25c/0x2ac) [ 5.568420] [<c0008e08>] (mount_block_root+0x25c/0x2ac) from [<c0009020>] (prepare_namespace+0x164/0x1bc) [ 5.578125] [<c0009020>] (prepare_namespace+0x164/0x1bc) from [<c0008400>] (kernel_init+0xb8/0xe4) [ 5.587249] [<c0008400>] (kernel_init+0xb8/0xe4) from [<c004d498>] (do_exit+0x0/0x580) [ 5.595306] [<c004d498>] (do_exit+0x0/0x580) from [<00000001>] (0x1) -- Kalle Valo -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
