Linux for Texus Instruments OMAP Processors

• Thread Index

• Re: [RFC][RFT][PATCH] OMAPFB: LCDC: change update_mode to DISABLED when going suspend
  • From: Janusz Krzysztofik <jkrzyszt@xxxxxxxxxxxx>
• Re: omap: Build failure with tip of Linus' tree
  • From: Felipe Balbi <me@xxxxxxxxxxxxxxx>
• [PATCH 6/6] omap: move generic omap3 features to generic
  • From: Nishanth Menon <nm@xxxxxx>
• [PATCH 0/6] introduce generic OMAP SOC features
  • From: Nishanth Menon <nm@xxxxxx>
• [PATCH 2/6] omap2/3: id: fix sparse warning
  • From: Nishanth Menon <nm@xxxxxx>
• [PATCH 1/6] omap1: rename check_revision
  • From: Nishanth Menon <nm@xxxxxx>
• [PATCH 4/6] omap: improve OMAP3_HAS_FEATURE
  • From: Nishanth Menon <nm@xxxxxx>
• [PATCH 5/6] omap: introduce OMAP_SHOW_FEATURE
  • From: Nishanth Menon <nm@xxxxxx>
• [PATCH 3/6] omap: generic: introduce a single check_revision
  • From: Nishanth Menon <nm@xxxxxx>
• omap: Build failure with tip of Linus' tree
  • From: Amit Kucheria <amit.kucheria@xxxxxxxxxxxxx>
• Re: usb_nop_xceiv_register() missing when OTG built as modules
  • From: Amit Kucheria <amit.kucheria@xxxxxxxxxxxxx>
• Re: [RFC] Initial attempt to make ARM use LMB
  • From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
• [RFC/PATCH 2/2] omap: mailbox: add omap_device latency information
  • From: Felipe Contreras <felipe.contreras@xxxxxxxxx>
• [RFC/PATCH 1/2] omap: mailbox: initial hwmod support
  • From: Felipe Contreras <felipe.contreras@xxxxxxxxx>
• [RFC/PATCH 0/2] omap: mailbox: hwmod experiment
  • From: Felipe Contreras <felipe.contreras@xxxxxxxxx>
• [PATCH v3 14/14] omap: mailbox: reorganize headers
  • From: Felipe Contreras <felipe.contreras@xxxxxxxxx>
• [PATCH v3 13/14] omap: mailbox: simplify omap_mbox_register()
  • From: Felipe Contreras <felipe.contreras@xxxxxxxxx>
• [PATCH v3 12/14] omap: mailbox: standarize on 'omap-mailbox'
  • From: Felipe Contreras <felipe.contreras@xxxxxxxxx>
• [PATCH v3 11/14] omap: mailbox: only compile for configured archs
  • From: Felipe Contreras <felipe.contreras@xxxxxxxxx>
• [PATCH v3 10/14] omap: mailbox: reorganize registering
  • From: Felipe Contreras <felipe.contreras@xxxxxxxxx>
• [PATCH v3 09/14] omap: mailbox: add IRQ names
  • From: Felipe Contreras <felipe.contreras@xxxxxxxxx>
• [PATCH v3 08/14] omap: mailbox: remove unecessary fields
  • From: Felipe Contreras <felipe.contreras@xxxxxxxxx>
• [PATCH v3 03/14] omap: mailbox: reorganize structures
  • From: Felipe Contreras <felipe.contreras@xxxxxxxxx>
• [PATCH v3 07/14] omap: mailbox: don't export unecessary symbols
  • From: Felipe Contreras <felipe.contreras@xxxxxxxxx>
• [PATCH v3 06/14] omap: mailbox: update omap1 probing
  • From: Felipe Contreras <felipe.contreras@xxxxxxxxx>
• [PATCH v3 04/14] omap: mailbox: 2420 should be detected at run-time
  • From: Felipe Contreras <felipe.contreras@xxxxxxxxx>
• [PATCH v3 05/14] omap: mailbox: use correct config for omap1
  • From: Felipe Contreras <felipe.contreras@xxxxxxxxx>
• [PATCH v3 02/14] omap: mailbox: trivial cleanups
  • From: Felipe Contreras <felipe.contreras@xxxxxxxxx>
• [PATCH v3 01/14] omap: mailbox: trivial whitespace cleanups
  • From: Felipe Contreras <felipe.contreras@xxxxxxxxx>
• [PATCH v3 00/14] omap: mailbox: bunch of cleanups
  • From: Felipe Contreras <felipe.contreras@xxxxxxxxx>
• Re: [PATCH v2t2 00/17] omap: mailbox:
  • From: Felipe Contreras <felipe.contreras@xxxxxxxxx>
• RE: Re: omap_musb_board_data -- trouble specifying 500mA supply
  • From: David Brownell <david-b@xxxxxxxxxxx>
• [PATCH 6/6] OMAP2PLUS: WDT: Conversion to runtime PM
  • From: Charulatha V <charu@xxxxxx>
• [PATCH 4/6] OMAP2430: WDT: Add watchdog timer HWMOD data for OMAP2430
  • From: Charulatha V <charu@xxxxxx>
• [PATCH 5/6] OMAP4: WDT: Enable watchdog timer2 hwmod structure
  • From: Charulatha V <charu@xxxxxx>
• [PATCH 3/6] OMAP2420: WDT: Add watchdog timer HWMOD data for OMAP2420
  • From: Charulatha V <charu@xxxxxx>
• [PATCH 1/6] OMAP2PLUS: WDT: Add ICLKEN, FCLKEN, WKEN shared bits for WDT
  • From: Charulatha V <charu@xxxxxx>
• [PATCH 0/6] OMAP2PLUS: WDT: Implement WDT in HWMOD way
  • From: Charulatha V <charu@xxxxxx>
• [PATCH 2/6] OMAP3: WDT: Add watchdog timer HWMOD data for OMAP3
  • From: Charulatha V <charu@xxxxxx>
• Re: [PATCH 1/6 Revised] SPI omap2_mcspi.c: Check params before dereference or use
  • From: Grant Likely <grant.likely@xxxxxxxxxxxx>
• Re: [PATCH v2t2 00/17] omap: mailbox:
  • From: Hiroshi DOYU <Hiroshi.DOYU@xxxxxxxxx>
• Re: [PATCH v2t2 00/17] omap: mailbox:
  • From: Hiroshi DOYU <Hiroshi.DOYU@xxxxxxxxx>
• RE: Re: omap_musb_board_data -- trouble specifying 500mA supply
  • From: "Gupta, Ajay Kumar" <ajay.gupta@xxxxxx>
• Re: [pm-wip/uart][PATCH 2/6] Serial: Add UART4 hwmod data.
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• Re: [pm-wip/uart][PATCH 2/6] Serial: Add UART4 hwmod data.
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2t2 00/17] omap: mailbox:
  • From: Felipe Contreras <felipe.contreras@xxxxxxxxx>
• Re: [PATCH v2t2 00/17] omap: mailbox:
  • From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
• Re: [PATCH v2t2 00/17] omap: mailbox:
  • From: Felipe Contreras <felipe.contreras@xxxxxxxxx>
• RE: Re: omap_musb_board_data -- trouble specifying 500mA supply
  • From: David Brownell <david-b@xxxxxxxxxxx>
• Re: [PATCH v2t2 00/17] omap: mailbox:
  • From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
• Re: [PATCH v2 00/17] omap: mailbox: reorganize init
  • From: Felipe Contreras <felipe.contreras@xxxxxxxxx>
• [PATCH v2t2 17/17] omap: mailbox: don't export register/unregister
  • From: Felipe Contreras <felipe.contreras@xxxxxxxxx>
• [PATCH v2t2 16/17] omap: mailbox: mark some resources as __initdata
  • From: Felipe Contreras <felipe.contreras@xxxxxxxxx>
• [PATCH v2t2 15/17] omap: mailbox: don't export unecessary symbols
  • From: Felipe Contreras <felipe.contreras@xxxxxxxxx>
• [PATCH v2t2 14/17] omap: mailbox: reorganize headers
  • From: Felipe Contreras <felipe.contreras@xxxxxxxxx>
• [PATCH v2t2 13/17] omap: mailbox: always built-in platform data
  • From: Felipe Contreras <felipe.contreras@xxxxxxxxx>
• [PATCH v2t2 12/17] omap: mailbox: split platform driver
  • From: Felipe Contreras <felipe.contreras@xxxxxxxxx>
• [PATCH v2t2 11/17] omap: mailbox: trivial sync between omap1 and 2
  • From: Felipe Contreras <felipe.contreras@xxxxxxxxx>
• [PATCH v2t2 10/17] omap: mailbox: move more stuff to omap_mbox_init()
  • From: Felipe Contreras <felipe.contreras@xxxxxxxxx>
• [PATCH v2t2 09/17] omap: mailbox: reorganize omap platform_device
  • From: Felipe Contreras <felipe.contreras@xxxxxxxxx>
• [PATCH v2t2 08/17] omap: mailbox: only compile for configured archs
  • From: Felipe Contreras <felipe.contreras@xxxxxxxxx>
• [PATCH v2t2 07/17] omap: mailbox: reorganize registering
  • From: Felipe Contreras <felipe.contreras@xxxxxxxxx>
• [PATCH v2t2 06/17] omap: mailbox: update omap1 probing
  • From: Felipe Contreras <felipe.contreras@xxxxxxxxx>
• [PATCH v2t2 05/17] omap: mailbox: use correct config for omap1
  • From: Felipe Contreras <felipe.contreras@xxxxxxxxx>
• [PATCH v2t2 04/17] omap: mailbox: 2420 should be detected at run-time
  • From: Felipe Contreras <felipe.contreras@xxxxxxxxx>
• [PATCH v2t2 03/17] omap: mailbox: reorganize structures
  • From: Felipe Contreras <felipe.contreras@xxxxxxxxx>
• [PATCH v2t2 02/17] omap: mailbox: trivial cleanups
  • From: Felipe Contreras <felipe.contreras@xxxxxxxxx>
• [PATCH v2t2 01/17] omap: mailbox: trivial whitespace cleanups
  • From: Felipe Contreras <felipe.contreras@xxxxxxxxx>
• [PATCH v2t2 00/17] omap: mailbox:
  • From: Felipe Contreras <felipe.contreras@xxxxxxxxx>
• Re: [PATCH 14/18 FIX] omap: Overo: Add support for second ethernet port
  • From: Steve Sakoman <sakoman@xxxxxxxxx>
• [GIT PULL] omap updates for 2.6.35
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH v2 0/3] Enable CPU frequency and power tracking in cpuacct cgroup
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• Re: Future of resource framework?
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 2/3] OMAP3630: PM: implement Foward Body-Bias for OPP1G
  • From: Eduardo Valentin <eduardo.valentin@xxxxxxxxx>
• [PATCH V6] OMAP: DSS: Add NEC NL8048HL11-01B display panel
  • From: "Nagarajan, Rajkumar" <x0133774@xxxxxx>
• [PATCH 2/2 V7] OMAP: ZOOM2/3&SDP3630: Enable display on ZOOM2/3 & 3630SDP
  • From: "Nagarajan, Rajkumar" <x0133774@xxxxxx>
• [PATCH 1/2 V7] OMAP: ZOOM2/3&SDP3630: Add display board file for zoom boards
  • From: "Nagarajan, Rajkumar" <x0133774@xxxxxx>
• [PATCH 2/5] ARM: add LCDC and MIPI DSI-Tx clock definitions to sh7372
  • From: Guennadi Liakhovetski <g.liakhovetski@xxxxxx>
• [PATCH 3/5] sh: add a YUV422 output data format, that is also supported by LCDC
  • From: Guennadi Liakhovetski <g.liakhovetski@xxxxxx>
• [PATCH 5/5 v2] ARM: add framebuffer support for ap4evb
  • From: Guennadi Liakhovetski <g.liakhovetski@xxxxxx>
• [PATCH 4/5 v2] sh-mobile: add support for displays, connected over the MIPI bus
  • From: Guennadi Liakhovetski <g.liakhovetski@xxxxxx>
• Re: collaboration on hwmod conversions and runtime PM
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 2/3] OMAP3630: PM: implement Foward Body-Bias for OPP1G
  • From: Mike Turquette <mturquette@xxxxxx>
• Re: [RFC] [PATCH] misc : ROHM BH1780GLI Ambient light sensor Driver
  • From: Daniel Mack <daniel@xxxxxxxx>
• Re: [RFC] [PATCH] TMP105 : Driver support for the temperature sensor
  • From: Jean Delvare <khali@xxxxxxxxxxxx>
• RE: [RFC] [PATCH] TMP105 : Driver support for the temperature sensor
  • From: "Datta, Shubhrajyoti" <shubhrajyoti@xxxxxx>
• Re: [RFC] [PATCH V2 1/2] input: CMA3000 Accelerometer driver
  • From: "Hemanth V" <hemanthv@xxxxxx>
• Re: [RFC] [PATCH] misc : ROHM BH1780GLI Ambient light sensor Driver
  • From: "Hemanth V" <hemanthv@xxxxxx>
• Re: [RFC] [PATCH] TMP105 : Driver support for the temperature sensor
  • From: Jonathan Cameron <kernel@xxxxxxxxxxxxxxxxxxxxx>
• Re: [RFC] [PATCH] TMP105 : Driver support for the temperature sensor
  • From: Jonathan Cameron <kernel@xxxxxxxxxxxxxxxxxxxxx>
• [GIT PULL] omap mailbox: updates for 2.6.35
  • From: Hiroshi DOYU <Hiroshi.DOYU@xxxxxxxxx>
• Re: [PATCH 1/5] gpiolib: introduce set_debounce method
  • From: Alan Cox <alan@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 1/5] gpiolib: introduce set_debounce method
  • From: David Brownell <david-b@xxxxxxxxxxx>
• Re: [PATCH 1/5] gpiolib: introduce set_debounce method
  • From: David Brownell <david-b@xxxxxxxxxxx>
• Re: [RFC] [PATCH] misc : ROHM BH1780GLI Ambient light sensor Driver
  • From: Daniel Mack <daniel@xxxxxxxx>
• Re: [PATCH 2/3] OMAP3630: PM: implement Foward Body-Bias for OPP1G
  • From: Eduardo Valentin <eduardo.valentin@xxxxxxxxx>
• Re: [RFC] [PATCH] misc : ROHM BH1780GLI Ambient light sensor Driver
  • From: "Hemanth V" <hemanthv@xxxxxx>
• Re: [PATCH 2/3] OMAP3630: PM: implement Foward Body-Bias for OPP1G
  • From: Eduardo Valentin <eduardo.valentin@xxxxxxxxx>
• [RFC] [PATCH] TMP105 : Driver support for the temperature sensor
  • From: "Datta, Shubhrajyoti" <shubhrajyoti@xxxxxx>
• Re: [RFC] [PATCH] misc : ROHM BH1780GLI Ambient light sensor Driver
  • From: Daniel Mack <daniel@xxxxxxxx>
• Re: [RFC] [PATCH] misc : ROHM BH1780GLI Ambient light sensor Driver
  • From: Jonathan Cameron <jic23@xxxxxxxxx>
• Re: [RFC] [PATCH V2 1/2] input: CMA3000 Accelerometer driver
  • From: Jonathan Cameron <jic23@xxxxxxxxx>
• [RFC] [PATCH] misc : ROHM BH1780GLI Ambient light sensor Driver
  • From: "Hemanth V" <hemanthv@xxxxxx>
• [RFC] [PATCH] misc : ROHM BH1780GLI Ambient light sensor Driver
  • From: "Hemanth V" <hemanthv@xxxxxx>
• RE: collaboration on hwmod conversions and runtime PM
  • From: "Nayak, Rajendra" <rnayak@xxxxxx>
• Re: [PATCH 10/22] OMAP: hwmod: Replace WARN by pr_warning for clockdomain check
  • From: Benoit Cousson <b-cousson@xxxxxx>
• Re: [PATCH 10/22] OMAP: hwmod: Replace WARN by pr_warning for clockdomain check
  • From: Sergei Shtylyov <sshtylyov@xxxxxxxxxx>
• Re: [PATCH 07/22] OMAP: hwmod: Replace WARN by pr_warning if clock lookup failed
  • From: Benoit Cousson <b-cousson@xxxxxx>
• Re: [PATCH 1/5] gpiolib: introduce set_debounce method
  • From: Alan Cox <alan@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 10/22] OMAP: hwmod: Replace WARN by pr_warning for clockdomain check
  • From: Sergei Shtylyov <sshtylyov@xxxxxxxxxx>
• Re: [PATCH 07/22] OMAP: hwmod: Replace WARN by pr_warning if clock lookup failed
  • From: Sergei Shtylyov <sshtylyov@xxxxxxxxxx>
• Re: [PATCH 1/5] gpiolib: introduce set_debounce method
  • From: Alan Cox <alan@xxxxxxxxxxxxxxxxxxx>
• Re: [RFC/PATCH 0/6] DSPBRIDGE: fix mem+cache API issues
  • From: Felipe Contreras <felipe.contreras@xxxxxxxxx>
• Re: [PATCH v2] OMAP: Fix Memory leak
  • From: Hiroshi DOYU <Hiroshi.DOYU@xxxxxxxxx>
• Re: [PATCH 2/2] omap: iommu-add functionality to get TLB miss interrupt
  • From: Hiroshi DOYU <Hiroshi.DOYU@xxxxxxxxx>
• Re: [PATCH] ARM: OMAP: Fix board data to support device only, host only and OTG roles.
  • From: Felipe Balbi <felipe.balbi@xxxxxxxxx>
• RE: [PATCH v2] OMAP: Fix Memory leak
  • From: "Aguirre, Sergio" <saaguirre@xxxxxx>
• [pm-wip/uart][PATCH] Serial: Avoid using hwmod lookup using name string.
  • From: "Govindraj.R" <govindraj.raja@xxxxxx>
• Re: [PATCH] OMAP: DSS2: storage class should be before const qualifier
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxxxxx>
• Re: [PATCH 1/4 v3] fbdev: add a MIPI DSI header
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxxxxx>
• [GIT PULL] OMAP DSS updates for 2.6.35
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxxxxx>
• Re: [RFC/PATCH 0/6] DSPBRIDGE: fix mem+cache API issues
  • From: Ohad Ben-Cohen <ohad@xxxxxxxxxx>
• Re: DSS2 failure with current linux-omap head
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxxxxx>
• RE: [PATCH] ARM: OMAP: Fix board data to support device only, host only and OTG roles.
  • From: "Gupta, Ajay Kumar" <ajay.gupta@xxxxxx>
• Re: [PATCH] ARM: OMAP: Fix board data to support device only, host only and OTG roles.
  • From: Felipe Balbi <felipe.balbi@xxxxxxxxx>
• [RFC] [PATCH V2 1/2] input: CMA3000 Accelerometer driver
  • From: "Hemanth V" <hemanthv@xxxxxx>
• Re: [PATCH 1/5] gpiolib: introduce set_debounce method
  • From: Felipe Balbi <felipe.balbi@xxxxxxxxx>
• [RFC ] [PATCH V2 2/2] Platform changes for CMA3000
  • From: "Hemanth V" <hemanthv@xxxxxx>
• RE: [PATCH 3/3 v2] musb: AM35x: Workaround for fifo read issue
  • From: "Gupta, Ajay Kumar" <ajay.gupta@xxxxxx>
• Re: [RFC/PATCH 0/6] DSPBRIDGE: fix mem+cache API issues
  • From: Felipe Contreras <felipe.contreras@xxxxxxxxx>
• [PATCH v2] OMAP: Fix Memory leak
  • From: Manjunatha GK <manjugk@xxxxxx>
• [PATCH v5] OMAP3: Registering sgx device and it's platform data
  • From: Manjunatha GK <manjugk@xxxxxx>
• Re: [PATCH 2/2] omap: iommu-add functionality to get TLB miss interrupt
  • From: Hiroshi DOYU <Hiroshi.DOYU@xxxxxxxxx>
• RE: [PATCH] ARM: OMAP: Fix board data to support device only, host only and OTG roles.
  • From: "Gupta, Ajay Kumar" <ajay.gupta@xxxxxx>
• RE: [PATCH V2] OMAP3: PM: Workaround for DPLL3 Lock issue
  • From: "Girish S G" <girishsg@xxxxxx>
• [PATCH] OMAP: hwmod: if IDLEST fields are not set, use module defaults
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• [PATCH] OMAP: hwmod: allow idle after HWMOD_INIT_NO_IDLE
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• collaboration on hwmod conversions and runtime PM
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• Re: Future of resource framework?
  • From: Nishanth Menon <nm@xxxxxx>
• Re: [linux-pm] [PATCH 0/8] Suspend block api (version 6)
  • From: David Brownell <david-b@xxxxxxxxxxx>
• Re: [PATCH] mfd: twl5031: Rename sih modules
  • From: Samuel Ortiz <sameo@xxxxxxxxxxxxxxx>
• Re: [PATCH 1/5] gpiolib: introduce set_debounce method
  • From: David Brownell <david-b@xxxxxxxxxxx>
• Future of resource framework?
  • From: Mike Chan <mike@xxxxxxxxxxx>
• Re: [PATCH] omap:hwmod-remove prm header from prm-regbits-xxxx headers
  • From: Benoit Cousson <b-cousson@xxxxxx>
• Re: [RFC/PATCH 0/6] DSPBRIDGE: fix mem+cache API issues
  • From: Ohad Ben-Cohen <ohad@xxxxxxxxxx>
• Re: [RFC/PATCH 0/6] DSPBRIDGE: fix mem+cache API issues
  • From: Ohad Ben-Cohen <ohad@xxxxxxxxxx>
• Re: [PATCH v2 0/3] Enable CPU frequency and power tracking in cpuacct cgroup
  • From: Mike Chan <mike@xxxxxxxxxxx>
• Re: [RFC/PATCH 0/6] DSPBRIDGE: fix mem+cache API issues
  • From: Ohad Ben-Cohen <ohad@xxxxxxxxxx>
• [PATCH 1/2] omap: iommu-update irq mask to be specific about twl and tlb
  • From: Hari Kanigeri <h-kanigeri2@xxxxxx>
• [PATCH 2/2] omap: iommu-add functionality to get TLB miss interrupt
  • From: Hari Kanigeri <h-kanigeri2@xxxxxx>
• [PATCH 0/2][v2] omap:iommu-enable TLB miss interrupt
  • From: Hari Kanigeri <h-kanigeri2@xxxxxx>
• Re: [PATCH v2 0/3] Enable CPU frequency and power tracking in cpuacct cgroup
  • From: Thomas Renninger <trenn@xxxxxxx>
• Re: [PATCH 1/5] gpiolib: introduce set_debounce method
  • From: Alan Cox <alan@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 1/5] gpiolib: introduce set_debounce method
  • From: Mark Brown <broonie@xxxxxxxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 1/5] gpiolib: introduce set_debounce method
  • From: Andrew Morton <akpm@xxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 1/5] gpiolib: introduce set_debounce method
  • From: Alan Cox <alan@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 0/6] teach gpiolib about gpio debouncing
  • From: Felipe Balbi <me@xxxxxxxxxxxxxxx>
• Re: [PATCH 1/5] gpiolib: introduce set_debounce method
  • From: Felipe Balbi <me@xxxxxxxxxxxxxxx>
• Re: [linux-pm] [PATCH 0/8] Suspend block api (version 6)
  • From: Felipe Balbi <me@xxxxxxxxxxxxxxx>
• [PATCH v2 1/3] scheduler: cpuacct: Enable platform hooks to track cpuusage for CPU frequencies
  • From: Mike Chan <mike@xxxxxxxxxxx>
• [PATCH v2 0/3] Enable CPU frequency and power tracking in cpuacct cgroup
  • From: Mike Chan <mike@xxxxxxxxxxx>
• [PATCH v2 2/3] scheduler: cpuacct: Enable platform callbacks for cpuacct power tracking
  • From: Mike Chan <mike@xxxxxxxxxxx>
• [PATCH v2 3/3] omap: cpu: Implement callbacks for cpu frequency tracking in cpuacct
  • From: Mike Chan <mike@xxxxxxxxxxx>
• RE: [PATCH] omap:hwmod-remove prm header from prm-regbits-xxxx headers
  • From: "Kanigeri, Hari" <h-kanigeri2@xxxxxx>
• Re: [PATCH 0/6] teach gpiolib about gpio debouncing
  • From: Andrew Morton <akpm@xxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 1/5] gpiolib: introduce set_debounce method
  • From: Andrew Morton <akpm@xxxxxxxxxxxxxxxxxxxx>
• Re: [linux-pm] [PATCH 0/8] Suspend block api (version 6)
  • From: David Brownell <david-b@xxxxxxxxxxx>
• Re: [PATCH v4 0/5] Adding MMC Support on OMAP4430 SDP
  • From: "kishore kadiyala" <kishore.kadiyala@xxxxxx>
• Re: [PATCH 6/6] OMAP: hwmod: Temp fixes to get hwmod registers work
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 4/6] OMAP: hwmod: Temporary disable dependency
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] omap:hwmod-remove prm header from prm-regbits-xxxx headers
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 10/11] OMAP: GPIO: Implement GPIO as a platform device
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• [PATCH 1/4 v3] fbdev: add a MIPI DSI header
  • From: Guennadi Liakhovetski <g.liakhovetski@xxxxxx>
• Re: [PATCH] ARM: OMAP: Fix board data to support device only, host only and OTG roles.
  • From: David Brownell <david-b@xxxxxxxxxxx>
• RE: [PATCH] ARM: OMAP: Fix board data to support device only, host only and OTG roles.
  • From: David Brownell <david-b@xxxxxxxxxxx>
• Re: [PATCH] ARM: OMAP: Fix board data to support device only, host only and OTG roles.
  • From: Felipe Balbi <felipe.balbi@xxxxxxxxx>
• Re: [PATCH] OMAP2/3: Keypad: Fix memory leak
  • From: Vimal Singh <vimal.newwork@xxxxxxxxx>
• RE: [PATCH] ARM: OMAP: Fix board data to support device only, host only and OTG roles.
  • From: David Brownell <david-b@xxxxxxxxxxx>
• [PATCH] OMAP: DSS2: storage class should be before const qualifier
  • From: Tobias Klauser <tklauser@xxxxxxxxxx>
• Re: [PATCH] OMAP2/3: Keypad: Fix memory leak
  • From: Vimal Singh <vimal.newwork@xxxxxxxxx>
• Re: [PATCH] OMAP: Fix Memory leak
  • From: Vimal Singh <vimal.newwork@xxxxxxxxx>
• Re: [PATCH] DSPBRIDGE: fix incorrect reset in bridge_brd_start function
  • From: Deepak Chitriki <deepak.chitriki@xxxxxx>
• Re: [PATCH v3 1/3] omap3 gpmc: functionality enhancement
  • From: Vimal Singh <vimal.newwork@xxxxxxxxx>
• Re: [PATCH 1/4 v2] fbdev: add a MIPI DSI header
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxxxxx>
• [PATCH] OMAP: Fix Memory leak
  • From: Manjunatha GK <manjugk@xxxxxx>
• [PATCH] OMAP: FB: Fix Null pointer check
  • From: Manjunatha GK <manjugk@xxxxxx>
• [PATCH] OMAP2/3: Keypad: Fix memory leak
  • From: Manjunatha GK <manjugk@xxxxxx>
• [PATCH] OMAP: McSPI: Fix Null pointer check
  • From: Manjunatha GK <manjugk@xxxxxx>
• Re: [PATCH 1/4] fbdev: add a MIPI DSI header
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxxxxx>
• RE: [PATCH v4] OMAP3: Registering sgx device and it's platform data
  • From: "G, Manjunath Kondaiah" <manjugk@xxxxxx>
• RE: [PATCH] ARM: OMAP: Fix board data to support device only, host only and OTG roles.
  • From: "Gupta, Ajay Kumar" <ajay.gupta@xxxxxx>
• RE: [PATCH v4] OMAP3: Registering sgx device and it's platform data
  • From: "G, Manjunath Kondaiah" <manjugk@xxxxxx>
• [pm-wip/uart][PATCH 6/6] Serial: Update UART HWMOD layer.
  • From: "Govindraj.R" <govindraj.raja@xxxxxx>
• [pm-wip/uart][PATCH 5/6] Serial: Add UART hwmod data for 2430.
  • From: "Govindraj.R" <govindraj.raja@xxxxxx>
• [pm-wip/uart][PATCH 4/6] Serial: Add UART hwmod data for 2420.
  • From: "Govindraj.R" <govindraj.raja@xxxxxx>
• [pm-wip/uart][PATCH 3/6] Serial: Modify OMAP3 hwmod data file with uart data.
  • From: "Govindraj.R" <govindraj.raja@xxxxxx>
• [pm-wip/uart][PATCH 2/6] Serial: Add UART4 hwmod data.
  • From: "Govindraj.R" <govindraj.raja@xxxxxx>
• [pm-wip/uart][PATCH 1/6] Serial: Clean up set_uart_globals.
  • From: "Govindraj.R" <govindraj.raja@xxxxxx>
• [pm-wip/uart][PATCH 0/6]: Serial HWMOD updation and cleanup.
  • From: "Govindraj.R" <govindraj.raja@xxxxxx>
• [PATCH] ARM: OMAP: Fix board data to support device only, host only and OTG roles.
  • From: Maulik Mankad <x0082077@xxxxxx>
• Re: [linux-pm] [PATCH 0/8] Suspend block api (version 6)
  • From: Felipe Balbi <felipe.balbi@xxxxxxxxx>
• Re: [linux-pm] [PATCH 0/8] Suspend block api (version 6)
  • From: Vladimir Pantelic <pan@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH 1/4] fbdev: add a MIPI DSI header
  • From: Guennadi Liakhovetski <g.liakhovetski@xxxxxx>
• RE: [PATCH v2] omap4: Fix multi-omap boot with reset un-used clocks
  • From: "Arce, Abraham" <x0066660@xxxxxx>
• RE: [PATCH v2] omap4: Fix multi-omap boot with reset un-used clocks
  • From: "Shilimkar, Santosh" <santosh.shilimkar@xxxxxx>
• Re: [linux-pm] [PATCH 0/8] Suspend block api (version 6)
  • From: Felipe Balbi <felipe.balbi@xxxxxxxxx>
• RE: [PATCH 6/9] OMAP:GPIO:hwmod: add GPIO hwmods for OMAP3
  • From: "Varadarajan, Charulatha" <charu@xxxxxx>
• Re: [PATCH 6/9] OMAP:GPIO:hwmod: add GPIO hwmods for OMAP3
  • From: Benoit Cousson <b-cousson@xxxxxx>
• Re: [PATCH 3/3 v2] musb: AM35x: Workaround for fifo read issue
  • From: Felipe Balbi <felipe.balbi@xxxxxxxxx>
• [PATCHv2 2/2] omap: rx51: Add supply and data for the tpa6130a2 headphone amplifier
  • From: Jarkko Nikula <jhnikula@xxxxxxxxx>
• [PATCHv2 1/2] omap: rx51: Use REGULATOR_SUPPLY macro when initializing regulator consumers
  • From: Jarkko Nikula <jhnikula@xxxxxxxxx>
• Re: [PATCH 3/3 v2] musb: AM35x: Workaround for fifo read issue
  • From: Felipe Balbi <felipe.balbi@xxxxxxxxx>
• Re: [linux-pm] [PATCH 0/8] Suspend block api (version 6)
  • From: Florian Mickler <florian@xxxxxxxxxxx>
• [PATCH] mfd: twl5031: Rename sih modules
  • From: Ilkka Koskinen <ilkka.koskinen@xxxxxxxxx>
• RE: [PATCH 3/3 v2] musb: AM35x: Workaround for fifo read issue
  • From: "Gupta, Ajay Kumar" <ajay.gupta@xxxxxx>
• RE: [PATCH 3/3 v2] musb: AM35x: Workaround for fifo read issue
  • From: "Gupta, Ajay Kumar" <ajay.gupta@xxxxxx>
• RE: [PATCH 3/3 v2] musb: AM35x: Workaround for fifo read issue
  • From: "Gadiyar, Anand" <gadiyar@xxxxxx>
• Re: [PATCH 3/3 v2] musb: AM35x: Workaround for fifo read issue
  • From: Sergei Shtylyov <sshtylyov@xxxxxxxxxx>
• [PATCH 1/4 v2] fbdev: add a MIPI DSI header
  • From: Guennadi Liakhovetski <g.liakhovetski@xxxxxx>
• RE: [PATCH 3/3 v2] musb: AM35x: Workaround for fifo read issue
  • From: "Gupta, Ajay Kumar" <ajay.gupta@xxxxxx>
• Re: [PATCH] twl4030_wdt: Disable watchdog while probing
  • From: Timo Kokkonen <timo.t.kokkonen@xxxxxxxxx>
• Re: [PATCH 1/4] fbdev: add a MIPI DSI header
  • From: Guennadi Liakhovetski <g.liakhovetski@xxxxxx>
• Re: [linux-pm] [PATCH 0/8] Suspend block api (version 6)
  • From: Felipe Balbi <felipe.balbi@xxxxxxxxx>
• Re: [linux-pm] [PATCH 0/8] Suspend block api (version 6)
  • From: Felipe Balbi <me@xxxxxxxxxxxxxxx>
• Re: [PATCH 1/4] fbdev: add a MIPI DSI header
  • From: Felipe Balbi <me@xxxxxxxxxxxxxxx>
• Re: [PATCH 1/4] fbdev: add a MIPI DSI header
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxxxxx>
• Re: [PATCH 1/4] fbdev: add a MIPI DSI header
  • From: Guennadi Liakhovetski <g.liakhovetski@xxxxxx>
• Re: [PATCH 2/2] omap: rx51: Add supplies and data for the tpa6130a2 headphone amplifier
  • From: Eduardo Valentin <eduardo.valentin@xxxxxxxxx>
• Re: [PATCH] twl4030_wdt: Disable watchdog while probing
  • From: Wim Van Sebroeck <wim@xxxxxxxxx>
• Re: [PATCH] twl4030_wdt: Disable watchdog while probing
  • From: Timo Kokkonen <timo.t.kokkonen@xxxxxxxxx>
• RE: [PATCH v3 1/3] omap3 gpmc: functionality enhancement
  • From: "Ghorai, Sukumar" <s-ghorai@xxxxxx>
• Re: [linux-pm] [PATCH 0/8] Suspend block api (version 6)
  • From: Florian Mickler <florian@xxxxxxxxxxx>
• Re: [linux-pm] [PATCH 0/8] Suspend block api (version 6)
  • From: Felipe Balbi <felipe.balbi@xxxxxxxxx>
• RE: [PATCH v4 0/5] Adding MMC Support on OMAP4430 SDP
  • From: "Shilimkar, Santosh" <santosh.shilimkar@xxxxxx>
• RE: [PATCH v2] omap4: Fix multi-omap boot with reset un-used clocks
  • From: "Shilimkar, Santosh" <santosh.shilimkar@xxxxxx>
• RE: [PATCH v2] omap4: Fix multi-omap boot with reset un-used clocks
  • From: "Shilimkar, Santosh" <santosh.shilimkar@xxxxxx>
• [PATCH 0/3] omap iommu: kmemleak: Avoid false positive with special scan
  • From: Hiroshi DOYU <Hiroshi.DOYU@xxxxxxxxx>
• [PATCH 2/3] omap iommu: Rename iopte_[p,v]addr -> iopte_page_[p,v]addr
  • From: Hiroshi DOYU <Hiroshi.DOYU@xxxxxxxxx>
• [PATCH 3/3] omap iommu: kmemleak: Avoid false positive with special scan
  • From: Hiroshi DOYU <Hiroshi.DOYU@xxxxxxxxx>
• [PATCH 1/3] omap iommu: Introduce iopgd_is_table MACRO
  • From: Hiroshi DOYU <Hiroshi.DOYU@xxxxxxxxx>
• Re: [PATCH v2] omap4: Fix multi-omap boot with reset un-used clocks
  • From: Nishanth Menon <nm@xxxxxx>
• Re: [PATCH v2] omap4: Fix multi-omap boot with reset un-used clocks
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PM][PATCH] omap3: cpufreq: allow default opp table init
  • From: Nishanth Menon <nm@xxxxxx>
• Re: [PATCH v2] omap4: Fix multi-omap boot with reset un-used clocks
  • From: Nishanth Menon <nm@xxxxxx>
• Re: [PATCH v2] omap4: Fix multi-omap boot with reset un-used clocks
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH v2] omap4: Fix multi-omap boot with reset un-used clocks
  • From: Nishanth Menon <nm@xxxxxx>
• Re: [PATCH v2] omap4: Fix multi-omap boot with reset un-used clocks
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH v4 0/5] Adding MMC Support on OMAP4430 SDP
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [GIT PULL] OMAP clock/powerdomain/hwmod/omap_device patches for 2.6.35
  • From: Paul Walmsley <paul@xxxxxxxxx>
• Re: OMAP 3530 - DPLL4 Clock
  • From: Paul Walmsley <paul@xxxxxxxxx>
• Re: [PATCH v2] omap4: Fix multi-omap boot with reset un-used clocks
  • From: Paul Walmsley <paul@xxxxxxxxx>
• Re: [RFC/PATCH] arm: oprofile: remove locking from suspend/resume
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• DSS2 failure with current linux-omap head
  • From: Steve Sakoman <sakoman@xxxxxxxxx>
• [PATCH 3/4] DSPBRIDGE: Remove comments refering to "mini driver"
  • From: Ivan Gomez Castellanos <ivan.gomez@xxxxxx>
• [PATCH 4/4] DSPBRIDGE: Remove comments refering to "class driver"
  • From: Ivan Gomez Castellanos <ivan.gomez@xxxxxx>
• [PATCH 2/4] DSPBRIDGE: Remove comments refering to WCD.
  • From: Ivan Gomez Castellanos <ivan.gomez@xxxxxx>
• [PATCH 1/4] DSPBRIDGE: Remove comments refering to WMD.
  • From: Ivan Gomez Castellanos <ivan.gomez@xxxxxx>
• [PATCH 0/4] DSPBRIDGE: Remove comments refering to Windows OS.
  • From: Ivan Gomez Castellanos <ivan.gomez@xxxxxx>
• [PATCH] omap:hwmod-remove prm header from prm-regbits-xxxx headers
  • From: Hari Kanigeri <h-kanigeri2@xxxxxx>
• Re: [linux-pm] [PATCH 0/8] Suspend block api (version 6)
  • From: "Rafael J. Wysocki" <rjw@xxxxxxx>
• Re: [PATCH v2] omap4: Fix multi-omap boot with reset un-used clocks
  • From: Nishanth Menon <nm@xxxxxx>
• Re: [PATCH] scheduler: Extract cgroups_cpuaccount code from sched.c into own file
  • From: Mike Chan <mike@xxxxxxxxxxx>
• Re: [PATCH 4/4] omap: cpu: Power tracking support for cgroup cpuacct
  • From: Nishanth Menon <nm@xxxxxx>
• Re: [PATCH 4/4] omap: cpu: Power tracking support for cgroup cpuacct
  • From: Mike Chan <mike@xxxxxxxxxxx>
• Re: [PATCH v3 1/3] omap3 gpmc: functionality enhancement
  • From: Vimal Singh <vimal.newwork@xxxxxxxxx>
• Re: [PATCH 14/18] omap: Overo: Add support for second ethernet port
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH v3 2/3] omap3 nand: cleanup virtual address usages
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH v2 00/17] omap: mailbox: reorganize init
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH v3 2/3] omap3 nand: cleanup virtual address usages
  • From: Vimal Singh <vimal.newwork@xxxxxxxxx>
• RE: [PATCH v3 1/3] omap3 gpmc: functionality enhancement
  • From: "Ghorai, Sukumar" <s-ghorai@xxxxxx>
• RE: [PATCH 3/3] arm: omap: musb: do not issue SOFTRESET on omap3630
  • From: "Gadiyar, Anand" <gadiyar@xxxxxx>
• RE: [PATCH v3 2/3] omap3 nand: cleanup virtual address usages
  • From: "Ghorai, Sukumar" <s-ghorai@xxxxxx>
• Re: [RFC/PATCH 0/6] DSPBRIDGE: fix mem+cache API issues
  • From: Felipe Contreras <felipe.contreras@xxxxxxxxx>
• OMAP 3530 - DPLL4 Clock
  • From: Danilo Caravana <danilo.caravana@xxxxxxxxx>
• omap: hwmod questions
  • From: "Kanigeri, Hari" <h-kanigeri2@xxxxxx>
• Re: [PATCH] twl4030_wdt: Disable watchdog while probing
  • From: Wim Van Sebroeck <wim@xxxxxxxxx>
• [PATCH v2] omap4: Fix multi-omap boot with reset un-used clocks
  • From: Santosh Shilimkar <santosh.shilimkar@xxxxxx>
• [PATCH] tsl2563 ALS support for Nokia N900
  • From: Ameya Palande <ameya.palande@xxxxxxxxx>
• Re: [PATCH V2] OMAP3: PM: Workaround for DPLL3 Lock issue
  • From: Benoit Cousson <b-cousson@xxxxxx>
• Re: [PATCH v3 1/3] omap3 gpmc: functionality enhancement
  • From: Peter Barada <peter.barada@xxxxxxxxx>
• Re: [PATCH v4 0/5] Adding MMC Support on OMAP4430 SDP
  • From: "kishore kadiyala" <kishore.kadiyala@xxxxxx>
• Re: [PATCH 1/4] fbdev: add a MIPI DSI header
  • From: Ville Syrjälä <ville.syrjala@xxxxxxxxx>
• RE: [PATCH] omap4: Fix multi-omap boot with reset un-used clocks
  • From: "Shilimkar, Santosh" <santosh.shilimkar@xxxxxx>
• Re: [alsa-devel] [PATCH 2/4] OMAP: mcbsp - add smart idle configuration API
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 4/4] omap: cpu: Power tracking support for cgroup cpuacct
  • From: Thomas Renninger <trenn@xxxxxxx>
• Re: [PATCH 01/11] OMAP: GPIO: Modify init() in preparation for platform device implementation
  • From: Benoit Cousson <b-cousson@xxxxxx>
• Re: [PATCH v3 2/3] omap3 nand: cleanup virtual address usages
  • From: Vimal Singh <vimal.newwork@xxxxxxxxx>
• RE: [PATCH v4 0/5] Adding MMC Support on OMAP4430 SDP
  • From: "Madhusudhan" <madhu.cr@xxxxxx>
• Re: [PATCH 00/11] OMAP: GPIO: Implement GPIO in HWMOD way
  • From: Benoit Cousson <b-cousson@xxxxxx>
• Re: [PATCH 1/4] fbdev: add a MIPI DSI header
  • From: Paul Mundt <lethal@xxxxxxxxxxxx>
• Re: [PATCH] omap4: Fix multi-omap boot with reset un-used clocks
  • From: Paul Walmsley <paul@xxxxxxxxx>
• Re: [PATCH 0/4] McBSP smart idle and DMA op mode updates for ASoC
  • From: Jarkko Nikula <jhnikula@xxxxxxxxx>
• Re: [PATCH v3 1/3] omap3 gpmc: functionality enhancement
  • From: Vimal Singh <vimal.newwork@xxxxxxxxx>
• RE: [PATCH V2] OMAP3: PM: Workaround for DPLL3 Lock issue
  • From: "Sripathy, Vishwanath" <vishwanath.bs@xxxxxx>
• Re: [PATCH V2] OMAP3: PM: Workaround for DPLL3 Lock issue
  • From: Benoit Cousson <b-cousson@xxxxxx>
• Re: [PATCH 1/4] fbdev: add a MIPI DSI header
  • From: Ville Syrjälä <ville.syrjala@xxxxxxxxx>
• RE: [PATCH v2] ARMv7: Use the Inner Shareable I-cache on MP
  • From: Catalin Marinas <catalin.marinas@xxxxxxx>
• RE: [PATCH 01/11] OMAP: GPIO: Modify init() in preparation for platform device implementation
  • From: "Varadarajan, Charulatha" <charu@xxxxxx>
• RE: [PATCH 00/11] OMAP: GPIO: Implement GPIO in HWMOD way
  • From: "Varadarajan, Charulatha" <charu@xxxxxx>
• RE: [PATCH V2] OMAP3: PM: Workaround for DPLL3 Lock issue
  • From: "Sripathy, Vishwanath" <vishwanath.bs@xxxxxx>
• Re: [PATCH 4/4] omap: cpu: Power tracking support for cgroup cpuacct
  • From: Nishanth Menon <nm@xxxxxx>
• RE: [PATCH v2] ARMv7: Use the Inner Shareable I-cache on MP
  • From: "Shilimkar, Santosh" <santosh.shilimkar@xxxxxx>
• Re: [PATCH v2] ARMv7: Use the Inner Shareable I-cache on MP
  • From: Venkatraman S <svenkatr@xxxxxx>
• Re: [PATCH 0/4] McBSP smart idle and DMA op mode updates for ASoC
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxxxxx>
• RE: [PATCH 2/2] omap: iommu-add functionality to get TLB miss interrupt
  • From: "Kanigeri, Hari" <h-kanigeri2@xxxxxx>
• Re: [alsa-devel] [PATCH 2/4] OMAP: mcbsp - add smart idle configuration API
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxxxxx>
• [PATCH v2] ARMv7: Use the Inner Shareable I-cache on MP
  • From: Santosh Shilimkar <santosh.shilimkar@xxxxxx>
• Re: [PATCH 0/4] McBSP smart idle and DMA op mode updates for ASoC
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxxxxx>
• [PATCH] omap4: Fix multi-omap boot with reset un-used clocks
  • From: Santosh Shilimkar <santosh.shilimkar@xxxxxx>
• [PATCH] ARMv7: Use the Inner Shareable I-cache on MP
  • From: Santosh Shilimkar <santosh.shilimkar@xxxxxx>
• Re: [PATCH V2] OMAP3: PM: Workaround for DPLL3 Lock issue
  • From: Benoit Cousson <b-cousson@xxxxxx>
• Re: [PATCH 2/3] arm: omap: let pm code always handle musb pm init
  • From: Felipe Balbi <felipe.balbi@xxxxxxxxx>
• Re: [PATCH 0/4] McBSP smart idle and DMA op mode updates for ASoC
  • From: Eduardo Valentin <eduardo.valentin@xxxxxxxxx>
• Re: [PATCH 0/4] McBSP smart idle and DMA op mode updates for ASoC
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxxxxx>
• Re: [PATCH 1/4] OMAP: mcbsp - add omap_mcbsp_set_dma_op_mode()
  • From: Liam Girdwood <lrg@xxxxxxxxxxxxxxx>
• Re: [alsa-devel] [PATCH 2/4] OMAP: mcbsp - add smart idle configuration API
  • From: Eduardo Valentin <eduardo.valentin@xxxxxxxxx>
• Re: [PATCH 0/4] McBSP smart idle and DMA op mode updates for ASoC
  • From: Eduardo Valentin <eduardo.valentin@xxxxxxxxx>
• Re: [alsa-devel] [PATCH 2/4] OMAP: mcbsp - add smart idle configuration API
  • From: Liam Girdwood <lrg@xxxxxxxxxxxxxxx>
• Re: [PATCH 2/3] arm: omap: let pm code always handle musb pm init
  • From: Eduardo Valentin <eduardo.valentin@xxxxxxxxx>
• Re: [PATCH 0/4] McBSP smart idle and DMA op mode updates for ASoC
  • From: Liam Girdwood <lrg@xxxxxxxxxxxxxxx>
• Re: [PATCH 0/4] McBSP smart idle and DMA op mode updates for ASoC
  • From: Eduardo Valentin <eduardo.valentin@xxxxxxxxx>
• Re: [PATCH 1/4] OMAP: mcbsp - add omap_mcbsp_set_dma_op_mode()
  • From: Eduardo Valentin <eduardo.valentin@xxxxxxxxx>
• Re: [alsa-devel] [PATCH 2/4] OMAP: mcbsp - add smart idle configuration API
  • From: Liam Girdwood <lrg@xxxxxxxxxxxxxxx>
• Re: [PATCH 2/4] OMAP: mcbsp - add smart idle configuration API
  • From: Eduardo Valentin <eduardo.valentin@xxxxxxxxx>
• Re: [PATCH 0/4] McBSP smart idle and DMA op mode updates for ASoC
  • From: Eduardo Valentin <eduardo.valentin@xxxxxxxxx>
• Re: [PATCH] scheduler: Extract cgroups_cpuaccount code from sched.c into own file
  • From: Peter Zijlstra <peterz@xxxxxxxxxxxxx>
• RE: [PATCH V2] OMAP3: PM: Workaround for DPLL3 Lock issue
  • From: "Sripathy, Vishwanath" <vishwanath.bs@xxxxxx>
• Re: [PATCH v2 00/17] omap: mailbox: reorganize init
  • From: Felipe Contreras <felipe.contreras@xxxxxxxxx>
• [PATCH 2/3] arm: omap: let pm code always handle musb pm init
  • From: felipe.balbi@xxxxxxxxx
• Re: [PATCH 2/2] omap: iommu-add functionality to get TLB miss interrupt
  • From: Felipe Contreras <felipe.contreras@xxxxxxxxx>
• [PATCH 1/3] arm: omap: musb: proper error checking
  • From: felipe.balbi@xxxxxxxxx
• [PATCH 3/3] arm: omap: musb: do not issue SOFTRESET on omap3630
  • From: felipe.balbi@xxxxxxxxx
• Re: [PATCH] scheduler: Extract cgroups_cpuaccount code from sched.c into own file
  • From: Peter Zijlstra <peterz@xxxxxxxxxxxxx>
• Re: [alsa-devel] [PATCH 3/4] ASoC: mcbsp - add machine threshold callback
  • From: Liam Girdwood <lrg@xxxxxxxxxxxxxxx>
• [PATCH] scheduler: Extract cgroups_cpuaccount code from sched.c into own file
  • From: Thomas Renninger <trenn@xxxxxxx>
• Re: [PATCH 2/2] omap: iommu-add functionality to get TLB miss interrupt
  • From: Hiroshi DOYU <Hiroshi.DOYU@xxxxxxxxx>
• Re: [PATCH/PM] arm: omap: musb: proper error checking
  • From: Felipe Balbi <felipe.balbi@xxxxxxxxx>
• Re: [PATCH 00/11] OMAP: GPIO: Implement GPIO in HWMOD way
  • From: Benoit Cousson <b-cousson@xxxxxx>
• Re: [alsa-devel] [PATCH 0/4] McBSP smart idle and DMA op mode updates for ASoC
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxxxxx>
• Re: [PATCH 0/4] McBSP smart idle and DMA op mode updates for ASoC
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxxxxx>
• Re: [PATCH 1/4] fbdev: add a MIPI DSI header
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxxxxx>
• Re: [PATCH 1/4] fbdev: add a MIPI DSI header
  • From: Guennadi Liakhovetski <g.liakhovetski@xxxxxx>
• Re: [PATCH 01/11] OMAP: GPIO: Modify init() in preparation for platform device implementation
  • From: Benoit Cousson <b-cousson@xxxxxx>
• RE: [PATCH 10/11] OMAP: GPIO: Implement GPIO as a platform device
  • From: "Cousson, Benoit" <b-cousson@xxxxxx>
• Re: [PATCH 1/4] fbdev: add a MIPI DSI header
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxxxxx>
• RE: [PATCH 00/11] OMAP: GPIO: Implement GPIO in HWMOD way
  • From: "Varadarajan, Charulatha" <charu@xxxxxx>
• RE: [PATCH 09/11] OMAP: GPIO: Introduce support for OMAP2PLUS chip GPIO init
  • From: "Varadarajan, Charulatha" <charu@xxxxxx>
• RE: [PATCH 01/11] OMAP: GPIO: Modify init() in preparation for platform device implementation
  • From: "Varadarajan, Charulatha" <charu@xxxxxx>
• Re: [linux-pm] [PATCH 0/8] Suspend block api (version 6)
  • From: Felipe Balbi <felipe.balbi@xxxxxxxxx>
• Re: [RFC/PATCH] arm: oprofile: remove locking from suspend/resume
  • From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
• [PATCH/PM] arm: omap: musb: proper error checking
  • From: felipe.balbi@xxxxxxxxx
• Re: [PATCH 1/4] OMAP: mcbsp - add omap_mcbsp_set_dma_op_mode()
  • From: Jarkko Nikula <jhnikula@xxxxxxxxx>
• Re: [alsa-devel] [PATCH 3/4] ASoC: mcbsp - add machine threshold callback
  • From: Jarkko Nikula <jhnikula@xxxxxxxxx>
• Re: [PATCH 2/4] OMAP: mcbsp - add smart idle configuration API
  • From: Jarkko Nikula <jhnikula@xxxxxxxxx>
• Re: [PATCH 0/4] McBSP smart idle and DMA op mode updates for ASoC
  • From: Jarkko Nikula <jhnikula@xxxxxxxxx>
• Re: [PATCH 3/4 v2] ARM: add framebuffer support for ap4evb
  • From: Damian <dhobsong@xxxxxxxxxx>
• Re: [PATCH 3/4] ARM: add framebuffer support for ap4evb
  • From: Damian <dhobsong@xxxxxxxxxx>
• Re: [PATCH 1.5/4] sh: add a YUV422 output data format, that is also supported by LCDC
  • From: Damian <dhobsong@xxxxxxxxxx>
• Re: [PATCH 2/4] sh-mobile: add support for displays, connected over the MIPI bus
  • From: Damian <dhobsong@xxxxxxxxxx>
• Re: [PATCH 1/4] fbdev: add a MIPI DSI header
  • From: Damian <dhobsong@xxxxxxxxxx>
• Re: [PATCH 00/14] Multiple fixes for Devkit8000
  • From: Kan-Ru Chen <kanru@xxxxxxxxx>
• [PATCH 04/22] OMAP4: hwmod: Replace OCPIF_HAS_IDLEST by HWMOD_NO_IDLEST
  • From: Paul Walmsley <paul@xxxxxxxxx>
• [PATCH 05/22] OMAP: hwmod: Fix wrong pointer iteration in oh->slaves
  • From: Paul Walmsley <paul@xxxxxxxxx>
• [PATCH 06/22] OMAP: hwmod: Remove IS_ERR check with omap_clk_get_by_name return value
  • From: Paul Walmsley <paul@xxxxxxxxx>
• [PATCH 07/22] OMAP: hwmod: Replace WARN by pr_warning if clock lookup failed
  • From: Paul Walmsley <paul@xxxxxxxxx>
• [PATCH 08/22] OMAP: hwmod: Do not exit the iteration if one clock init failed
  • From: Paul Walmsley <paul@xxxxxxxxx>
• [PATCH 09/22] OMAP: hwmod: Rename hwmod name for the MPU
  • From: Paul Walmsley <paul@xxxxxxxxx>
• [PATCH 10/22] OMAP: hwmod: Replace WARN by pr_warning for clockdomain check
  • From: Paul Walmsley <paul@xxxxxxxxx>
• [PATCH 01/22] OMAP4: hwmod: Replace module & device offsets by absolute clkctrl address
  • From: Paul Walmsley <paul@xxxxxxxxx>
• [PATCH 11/22] OMAP4: CM: Remove non-functional registers in ES1.0
  • From: Paul Walmsley <paul@xxxxxxxxx>
• [PATCH 12/22] OMAP4: PRM: Remove MPU internal code name and apply PRCM naming convention
  • From: Paul Walmsley <paul@xxxxxxxxx>
• [PATCH 02/22] OMAP: CM: Move MAX_MODULE_READY_TIME to cm.h
  • From: Paul Walmsley <paul@xxxxxxxxx>
• [PATCH 18/22] OMAP4 powerdomain: Fix pwrsts flags for ALWAYS ON domains
  • From: Paul Walmsley <paul@xxxxxxxxx>
• [PATCH 13/22] OMAP4: PRCM: Remove duplicate definition of base addresses
  • From: Paul Walmsley <paul@xxxxxxxxx>
• [PATCH 17/22] OMAP: timers: Fix clock source names for OMAP4
  • From: Paul Walmsley <paul@xxxxxxxxx>
• [PATCH 14/22] OMAP4: PRCM: Add offset defines for all PRM registers
  • From: Paul Walmsley <paul@xxxxxxxxx>
• [PATCH 22/22] OMAP2 clock: fix recursive spinlock attempt when CONFIG_CPU_FREQ=y
  • From: Paul Walmsley <paul@xxxxxxxxx>
• [PATCH 15/22] OMAP4: PRCM: Add offset defines for all CM registers
  • From: Paul Walmsley <paul@xxxxxxxxx>
• [PATCH 19/22] OMAP3 clock: add support for setting the divider for sys_clkout2 using clk_set_rate
  • From: Paul Walmsley <paul@xxxxxxxxx>
• [PATCH 21/22] OMAP powerdomain, hwmod, omap_device: add some credits
  • From: Paul Walmsley <paul@xxxxxxxxx>
• [PATCH 20/22] OMAP4 powerdomain: Support LOWPOWERSTATECHANGE for powerdomains
  • From: Paul Walmsley <paul@xxxxxxxxx>
• [PATCH 16/22] OMAP4 clock: Support clk_set_parent
  • From: Paul Walmsley <paul@xxxxxxxxx>
• [PATCH 03/22] OMAP4: hwmod & CM: Implement the omap4_cm_wait_module_ready function
  • From: Paul Walmsley <paul@xxxxxxxxx>
• [PATCH 00/22] OMAP PRCM/clock/powerdomain/hwmod: remaining patches for 2.6.35
  • From: Paul Walmsley <paul@xxxxxxxxx>
• Re: [PATCH 0/5] OMAP4: power framework fixes
  • From: Paul Walmsley <paul@xxxxxxxxx>
• [PATCH 0/4] Enable cpu frequency and power tracking for cpuacct cgroup
  • From: Mike Chan <mike@xxxxxxxxxxx>
• [PATCH 4/4] omap: cpu: Power tracking support for cgroup cpuacct
  • From: Mike Chan <mike@xxxxxxxxxxx>
• [PATCH 3/4] scheduler: cpuacct: Enable platform callbacks for cpuacct power tracking
  • From: Mike Chan <mike@xxxxxxxxxxx>
• [PATCH 2/4] omap: cpu: Implement callbacks for cpu frequency tracking in cpuacct
  • From: Mike Chan <mike@xxxxxxxxxxx>
• [PATCH 1/4] scheduler: cpuacct: Enable platform hooks to track cpuusage for CPU frequencies
  • From: Mike Chan <mike@xxxxxxxxxxx>
• [PATCH] DSPBRIDGE: fix incorrect reset in bridge_brd_start function
  • From: "Guzman Lugo, Fernando" <fernando.lugo@xxxxxx>
• RE: [PATCH 3/3] DSPBRIDGE: remove hw_prcm module and related functions
  • From: "Guzman Lugo, Fernando" <fernando.lugo@xxxxxx>
• Re: [PATCH 3/3] DSPBRIDGE: remove hw_prcm module and related functions
  • From: Deepak Chitriki <deepak.chitriki@xxxxxx>
• Re: [PATCHV4] OMAP3: SDRC : Errata 1.176 Fix - Accesses to DDR stall in SDRC after a Warm-reset
  • From: Paul Walmsley <paul@xxxxxxxxx>
• Re: [PATCH 02/13] omap4: Add support for i2c init
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 01/13] omap: Fix i2c platform init code for omap4
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [RFC/PATCH] arm: oprofile: remove locking from suspend/resume
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v4 0/5] Adding MMC Support on OMAP4430 SDP
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] touchscreen: ads7846: please don't touch free'd memory
  • From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
• [PATCH] touchscreen: ads7846: please don't touch free'd memory
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 09/11] OMAP: GPIO: Introduce support for OMAP2PLUS chip GPIO init
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 00/11] OMAP: GPIO: Implement GPIO in HWMOD way
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 01/11] OMAP: GPIO: Modify init() in preparation for platform device implementation
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [UPDATE] [RFC] [PATCH 0/4] OMAP4 Keyboard Controller Support
  • From: "Arce, Abraham" <x0066660@xxxxxx>
• Re: [alsa-devel] [PATCH 2/4] OMAP: mcbsp - add smart idle configuration API
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 4/5] OMAP: Add support for setting the divider for sys_clkout2 using clk_set_rate
  • From: Paul Walmsley <paul@xxxxxxxxx>
• RE: [alsa-devel] [PATCH 3/4] ASoC: mcbsp - add machine threshold callback
  • From: "Candelaria Villarreal, Jorge" <jorge.candelaria@xxxxxx>
• Re: [PATCH 2/4] OMAP: mcbsp - add smart idle configuration API
  • From: Nishanth Menon <nm@xxxxxx>
• Re: [PATCH 3/4] ASoC: mcbsp - add machine threshold callback
  • From: Mark Brown <broonie@xxxxxxxxxxxxxxxxxxxxxxxxxxx>
• [PATCH 4/4] OMAP: mcbsp - remove sysfs set for DMA op mode.
  • From: Liam Girdwood <lrg@xxxxxxxxxxxxxxx>
• [PATCH 3/4] ASoC: mcbsp - add machine threshold callback
  • From: Liam Girdwood <lrg@xxxxxxxxxxxxxxx>
• [PATCH 2/4] OMAP: mcbsp - add smart idle configuration API
  • From: Liam Girdwood <lrg@xxxxxxxxxxxxxxx>
• [PATCH 1/4] OMAP: mcbsp - add omap_mcbsp_set_dma_op_mode()
  • From: Liam Girdwood <lrg@xxxxxxxxxxxxxxx>
• [PATCH 0/4] McBSP smart idle and DMA op mode updates for ASoC
  • From: Liam Girdwood <lrg@xxxxxxxxxxxxxxx>
• Re: [PATCH v2 00/17] omap: mailbox: reorganize init
  • From: Hiroshi DOYU <Hiroshi.DOYU@xxxxxxxxx>
• Re: [PATCH 0/5] OMAP4: PRCM: Spring cleanup
  • From: Paul Walmsley <paul@xxxxxxxxx>
• Re: [PATCH 00/10] OMAP: HWMOD fixes and cleanup
  • From: Paul Walmsley <paul@xxxxxxxxx>
• Re: [PATCH 2/2] omap: rx51: Add supplies and data for the tpa6130a2 headphone amplifier
  • From: Jarkko Nikula <jhnikula@xxxxxxxxx>
• Re: dss2 for-next BUG at drivers/video/omap2/dss/core.c:323!
  • From: Felipe Contreras <felipe.contreras@xxxxxxxxx>
• RE: [PATCH 2/2] omap: iommu-add functionality to get TLB miss interrupt
  • From: "Kanigeri, Hari" <h-kanigeri2@xxxxxx>
• Re: [PATCH v2 00/17] omap: mailbox: reorganize init
  • From: Felipe Contreras <felipe.contreras@xxxxxxxxx>
• RE: [PATCH 1/2] omap: iommu-update irq mask to be specific about twl
  • From: "Kanigeri, Hari" <h-kanigeri2@xxxxxx>
• Re: [PATCH V2] OMAP3: PM: Workaround for DPLL3 Lock issue
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] MMC: OMAP HS-MMC: convert to dev_pm_ops
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• RE: [PATCH V2] OMAP3: PM: Workaround for DPLL3 Lock issue
  • From: "Sripathy, Vishwanath" <vishwanath.bs@xxxxxx>
• [PATCH 04/11] OMAP: GPIO: Introduce support for OMAP16xx chip GPIO init
  • From: Charulatha V <charu@xxxxxx>
• [PATCH 01/11] OMAP: GPIO: Modify init() in preparation for platform device implementation
  • From: Charulatha V <charu@xxxxxx>
• [PATCH 11/11] OMAP: GPIO: Remove omap_gpio_init()
  • From: Charulatha V <charu@xxxxxx>
• [PATCH 06/11] OMAP: GPIO: add GPIO hwmods structures for OMAP3
  • From: Charulatha V <charu@xxxxxx>
• [PATCH 07/11] OMAP: GPIO: add GPIO hwmods structures for OMAP242X
  • From: Charulatha V <charu@xxxxxx>
• [PATCH 02/11] OMAP: GPIO: Include platform_data structure for GPIO
  • From: Charulatha V <charu@xxxxxx>
• [PATCH 08/11] OMAP: GPIO: add GPIO hwmods structures for OMAP243X
  • From: Charulatha V <charu@xxxxxx>
• [PATCH 05/11] OMAP: GPIO: Introduce support for OMAP7xx chip GPIO init
  • From: Charulatha V <charu@xxxxxx>
• [PATCH 10/11] OMAP: GPIO: Implement GPIO as a platform device
  • From: Charulatha V <charu@xxxxxx>
• [PATCH 03/11] OMAP: GPIO: Introduce support for OMAP15xx chip GPIO init
  • From: Charulatha V <charu@xxxxxx>
• [PATCH 00/11] OMAP: GPIO: Implement GPIO in HWMOD way
  • From: Charulatha V <charu@xxxxxx>
• [PATCH 09/11] OMAP: GPIO: Introduce support for OMAP2PLUS chip GPIO init
  • From: Charulatha V <charu@xxxxxx>
• Re: [RFC PATCHv2 2/7] OMAP SSI: Introducing OMAP SSI driver
  • From: Sebastien Jan <s-jan@xxxxxx>
• Re: [linux-pm] [PATCH 0/8] Suspend block api (version 6)
  • From: James Bottomley <James.Bottomley@xxxxxxx>
• RE: [PATCH 3/3 v2] musb: AM35x: Workaround for fifo read issue
  • From: "Gupta, Ajay Kumar" <ajay.gupta@xxxxxx>
• Re: [PATCH 14/18] omap: Overo: Add support for second ethernet port
  • From: Steve Sakoman <sakoman@xxxxxxxxx>
• Re: [PATCH v2 00/17] omap: mailbox: reorganize init
  • From: Hiroshi DOYU <Hiroshi.DOYU@xxxxxxxxx>
• [PATCH] omap: trivial: checkpatch cleanups to board files
  • From: Anand Gadiyar <gadiyar@xxxxxx>
• Re: [PATCH 3/3 v2] musb: AM35x: Workaround for fifo read issue
  • From: Sergei Shtylyov <sshtylyov@xxxxxxxxxx>
• Re: [RFC/PATCH 0/6] DSPBRIDGE: fix mem+cache API issues
  • From: Ohad Ben-Cohen <ohad@xxxxxxxxxx>
• Re: [PATCH 2/2] omap: rx51: Add supplies and data for the tpa6130a2 headphone amplifier
  • From: Eduardo Valentin <eduardo.valentin@xxxxxxxxx>
• [PATCH 22/23] OMAP: DSS2: omap_dss_probe() conditional compilation cleanup
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxxxxx>
• [PATCH 19/23] OMAP3630: DSS2: Updating MAX divider value
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxxxxx>
• [PATCH 23/23] OMAP: DSS2: Fix omap_dss_probe() error path
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxxxxx>
• [PATCH 17/23] OMAP: DSS2: Add ACX565AKM Panel Driver
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxxxxx>
• [PATCH 14/23] OMAP: DSS2: TPO-TD03MTEA1: fix Kconfig dependency
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxxxxx>
• [PATCH 21/23] board-omap3-beagle: add DSS2 support
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxxxxx>
• [PATCH 20/23] OMAP2: DSS: Add missing line for update bg color
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxxxxx>
• [PATCH 12/23] OMAP: DSS2: Taal: Fix DSI bus locking problem
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxxxxx>
• [PATCH 04/23] OMAP: DSS2: Remove redundant enable/disable calls from SDI
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxxxxx>
• [PATCH v6 7/7] omap3: pm: Use generic TRITON power scripts for ZOOM[2,3], 3630SDP board
  • From: Lesly A M <leslyam@xxxxxx>
• [PATCH 13/23] OMAP: LCD LS037V7DW01: Add Backlight driver support
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxxxxx>
• [PATCH 02/23] OMAP: AM3517: Enable DSS2 in AM3517EVM defconfig
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxxxxx>
• [PATCH v6 6/7] omap3: pm: Use generic TRITON power scripts for 3430SDP board
  • From: Lesly A M <leslyam@xxxxxx>
• [PATCH 18/23] OMAP: RX51: Update board defconfig
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxxxxx>
• [PATCH 15/23] OMAP: RX51: Add LCD Panel support
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxxxxx>
• [PATCH 07/23] OMAP: DSS2: check lock_fb_info() return value
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxxxxx>
• [PATCH 16/23] OMAP: RX51: Add Touch Controller in SPI board info
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxxxxx>
• [PATCH 11/23] OMAP: DSS2: Taal: add mutex to protect panel data
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxxxxx>
• [PATCH v6 5/7] omap3: pm: Generic TRITON power scripts for OMAP3 based boards
  • From: Lesly A M <leslyam@xxxxxx>
• [PATCH 08/23] OMAP: DSS2: VENC: don't call platform_enable/disable() twice
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxxxxx>
• [PATCH 10/23] OMAP: DSS2: Make partial update width even
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxxxxx>
• [PATCH 05/23] OMAP: DSS2: Use vdds_sdi regulator supply in SDI
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxxxxx>
• [PATCH 09/23] OMAP: DSS2: Fix device disable when driver is not loaded
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxxxxx>
• [PATCH v6 4/7] omap3: pm: changing vdd0_/vdd1_ to vdd1_/vdd2_ in VC param structure
  • From: Lesly A M <leslyam@xxxxxx>
• [PATCH 06/23] OMAP: DSS2: fix lock_fb_info() and omapfb_lock() locking order
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxxxxx>
• [PATCH 03/23] OMAP: DSS2: Add Kconfig option for DPI display type
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxxxxx>
• [PATCH 00/23] OMAP DSS patches for 2.6.35 merge window
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxxxxx>
• [PATCH 01/23] OMAP: Enable DSS2 in OMAP3EVM defconfig
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxxxxx>
• [PATCH v6 3/7] omap3: pm: re-programing the setup time based on CORE_DOMAIN target state
  • From: Lesly A M <leslyam@xxxxxx>
• [PATCH v6 2/7] omap3: pm: Using separate clk/volt setup_time for RET and OFF states
  • From: Lesly A M <leslyam@xxxxxx>
• Re: dss2 for-next BUG at drivers/video/omap2/dss/core.c:323!
  • From: Robert Nelson <robertcnelson@xxxxxxxxx>
• [PATCH v6 1/7] omap3: pm: fix for twl4030 script load
  • From: Lesly A M <leslyam@xxxxxx>
• [PATCH v6 0/7] omap3: pm: Update TRITON power scripts and making it generic
  • From: Lesly A M <leslyam@xxxxxx>
• Re: [RFC/PATCH 0/6] DSPBRIDGE: fix mem+cache API issues
  • From: Felipe Contreras <felipe.contreras@xxxxxxxxx>
• [PATCH 3/3 v2] musb: AM35x: Workaround for fifo read issue
  • From: Ajay Kumar Gupta <ajay.gupta@xxxxxx>
• [PATCH 6/6 v2] musb: dma: use optimal transfer element for sdma
  • From: Ajay Kumar Gupta <ajay.gupta@xxxxxx>
• [PATCH 14/14] OMAP2: Devkit8000: Correct regulator
  • From: Thomas Weber <weber@xxxxxxxxxxxxx>
• [PATCH 06/14] OMAP2: Devkit8000: Remove nonexisting vsim
  • From: Thomas Weber <weber@xxxxxxxxxxxxx>
• [PATCH 11/14] OMAP2: Devkit8000: Fix comment
  • From: Thomas Weber <weber@xxxxxxxxxxxxx>
• [PATCH 08/14] OMAP2: Devkit8000: Use the REGULATOR_SUPPLY macro
  • From: Thomas Weber <weber@xxxxxxxxxxxxx>
• [PATCH 04/14] OMAP2: Devkit8000: Setup LCD reset
  • From: Thomas Weber <weber@xxxxxxxxxxxxx>
• [PATCH 03/14] OMAP2: Devkit8000: Enable DVI-D output
  • From: Thomas Weber <weber@xxxxxxxxxxxxx>
• [PATCH 12/14] OMAP2: Devkit8000: Using gpio_is_valid
  • From: Thomas Weber <weber@xxxxxxxxxxxxx>
• [PATCH 00/14] Multiple fixes for Devkit8000
  • From: Thomas Weber <weber@xxxxxxxxxxxxx>
• [PATCH 13/14] OMAP2: Devkit8000: Remove unused omap_board_config
  • From: Thomas Weber <weber@xxxxxxxxxxxxx>
• [PATCH 05/14] OMAP2: Devkit8000: Remove unneeded VDVI
  • From: Thomas Weber <weber@xxxxxxxxxxxxx>
• [PATCH 10/14] OMAP2: Devkit8000: Fix whitespace with tab
  • From: Thomas Weber <weber@xxxxxxxxxxxxx>
• [PATCH 07/14] OMAP2: Devkit8000: Remove en-/disable for tv panel
  • From: Thomas Weber <weber@xxxxxxxxxxxxx>
• [PATCH 09/14] OMAP2: Devkit8000: Fixing comment about pins used
  • From: Thomas Weber <weber@xxxxxxxxxxxxx>
• [PATCH 01/14] OMAP2: Devkit8000: Cleanup for supplies
  • From: Thomas Weber <weber@xxxxxxxxxxxxx>
• [PATCH 02/14] OMAP2: Devkit8000: change lcd panel to generic
  • From: Thomas Weber <weber@xxxxxxxxxxxxx>
• Re: [PATCH 1/2] omap: rx51: Use REGULATOR_SUPPLY macro when initializing regulator consumers
  • From: Eduardo Valentin <eduardo.valentin@xxxxxxxxx>
• Re: [PATCH v2 00/17] omap: mailbox: reorganize init
  • From: Felipe Contreras <felipe.contreras@xxxxxxxxx>
• Re: [RFC/PATCH 0/6] DSPBRIDGE: fix mem+cache API issues
  • From: Ohad Ben-Cohen <ohad@xxxxxxxxxx>
• Re: [RFC/PATCH 0/6] DSPBRIDGE: fix mem+cache API issues
  • From: Felipe Contreras <felipe.contreras@xxxxxxxxx>
• [PATCH v3 2/3] omap3 nand: cleanup virtual address usages
  • From: Sukumar Ghorai <s-ghorai@xxxxxx>
• [PATCH v3 3/3] omap3 nand: fix issue in board file to detect nand
  • From: Sukumar Ghorai <s-ghorai@xxxxxx>
• [PATCH v3 1/3] omap3 gpmc: functionality enhancement
  • From: Sukumar Ghorai <s-ghorai@xxxxxx>
• [PATCH v3 0/3] omap3 nand: cleanup exiting platform related code
  • From: Sukumar Ghorai <s-ghorai@xxxxxx>
• Re: [RFC/PATCH 0/6] DSPBRIDGE: fix mem+cache API issues
  • From: Ohad Ben-Cohen <ohad@xxxxxxxxxx>
• [PATCH 2/2] omap: rx51: Add supplies and data for the tpa6130a2 headphone amplifier
  • From: Jarkko Nikula <jhnikula@xxxxxxxxx>
• [PATCH 1/2] omap: rx51: Use REGULATOR_SUPPLY macro when initializing regulator consumers
  • From: Jarkko Nikula <jhnikula@xxxxxxxxx>
• Re: [RFC/PATCH 0/6] DSPBRIDGE: fix mem+cache API issues
  • From: Felipe Contreras <felipe.contreras@xxxxxxxxx>
• RE: [PATCH 3/3] musb: AM35x: Workaround for fifo read issue
  • From: "Gupta, Ajay Kumar" <ajay.gupta@xxxxxx>
• RE: [PATCH 6/6] musb: dma: use optimal transfer element for sdma
  • From: "Gupta, Ajay Kumar" <ajay.gupta@xxxxxx>
• RE: [PATCH 3/3] musb: AM35x: Workaround for fifo read issue
  • From: "Gupta, Ajay Kumar" <ajay.gupta@xxxxxx>
• Re: [PATCH 17/18] omap: rx51: Add supplies for the tlv320aic3x codec driver
  • From: Jarkko Nikula <jhnikula@xxxxxxxxx>
• Re: [PATCH 3/3] musb: AM35x: Workaround for fifo read issue
  • From: Sergei Shtylyov <sshtylyov@xxxxxxxxxx>
• Re: [PATCH 6/6] musb: dma: use optimal transfer element for sdma
  • From: Sergei Shtylyov <sshtylyov@xxxxxxxxxx>
• Re: [RFC PATCHv2 2/7] OMAP SSI: Introducing OMAP SSI driver
  • From: Carlos Chinea <carlos.chinea@xxxxxxxxx>
• Re: [RFC] Initial attempt to make ARM use LMB
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxxxxx>
• RE: [PATCH v5 3/5] omap3: pm: Generic TRITON power scriptsforOMAP3 based boards
  • From: "Lesly Arackal Manuel" <leslyam@xxxxxx>
• Re: [PATCH v2 00/17] omap: mailbox: reorganize init
  • From: Hiroshi DOYU <Hiroshi.DOYU@xxxxxxxxx>
• Re: [RFC] Initial attempt to make ARM use LMB
  • From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
• Re: [RFC PATCHv2 1/7] HSI: Introducing HSI framework
  • From: Carlos Chinea <carlos.chinea@xxxxxxxxx>
• Re: [RFC/PATCH 0/6] DSPBRIDGE: fix mem+cache API issues
  • From: Ohad Ben-Cohen <ohad@xxxxxxxxxx>
• Re: dss2 for-next BUG at drivers/video/omap2/dss/core.c:323!
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxxxxx>
• Re: [RFC] Initial attempt to make ARM use LMB
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxxxxx>
• Re: [linux-pm] [PATCH 0/8] Suspend block api (version 6)
  • From: Felipe Balbi <felipe.balbi@xxxxxxxxx>
• Re: [RFC/PATCH 0/6] DSPBRIDGE: fix mem+cache API issues
  • From: Ohad Ben-Cohen <ohad@xxxxxxxxxx>
• Re: [PATCH 1/2] omap: iommu-update irq mask to be specific about twl
  • From: Hiroshi DOYU <Hiroshi.DOYU@xxxxxxxxx>
• Re: [PATCH 2/2] omap: iommu-add functionality to get TLB miss interrupt
  • From: Hiroshi DOYU <Hiroshi.DOYU@xxxxxxxxx>
• RE: [PATCH 1/3] omap4: Add i2c board support on omap4430 sdp platform
  • From: "Shilimkar, Santosh" <santosh.shilimkar@xxxxxx>
• Re: Issue with SCHED_FIFO app (using CFS)
  • From: Suresh Rajashekara <suresh.raj+linuxomap@xxxxxxxxx>
• Re: [PATCH] Add OMAP4 Panda support
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 1/3] omap4: Add i2c board support on omap4430 sdp platform
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH v4 4/5] OMAP HSMMC: Adding a flag to determine the card detect type
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 1/3] omap4: Add i2c board support on omap4430 sdp platform
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH v4 0/5] Adding MMC Support on OMAP4430 SDP
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 13/13] omap3: Add stalker board to omap3_defconfig
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 12/13] omap3: update omap3_defconfig
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 11/13] omap3: Add OMAP3 Stalker board LK-S defconfig
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 10/13] omap3: Add support for OMAP3Stalker boards
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 09/13] omap4: Enable HSMMC support
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 08/13] omap4: Adding PBIAS Configuration for MMC1 Controller
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 07/13] omap4: Adding hsmmc support to board file
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 06/13] omap4: Adds Dummy Interface clock's for MMC controllers
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 05/13] omap4: Enable RTC and regulator support
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 04/13] omap4: add i2c1 peripherals data
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 03/13] omap4: Add i2c board support on omap4430 sdp platform
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 02/13] omap4: Add support for i2c init
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 01/13] omap: Fix i2c platform init code for omap4
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 00/13] More omap platform init code for 2.6.35 merge window
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [APPLIED] [PATCH] omap3: update omap3_defconfig
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [APPLIED] [PATCH v2 4/5] OMAP4-HSMMC: Adds Dummy Interface clock&#39;s for MMC
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 2/2] omap: iommu-add functionality to get TLB miss interrupt
  • From: Hari Kanigeri <h-kanigeri2@xxxxxx>
• [PATCH 0/2] omap:iommu-enable TLB miss interrupt
  • From: Hari Kanigeri <h-kanigeri2@xxxxxx>
• [PATCH 1/2] omap: iommu-update irq mask to be specific about twl
  • From: Hari Kanigeri <h-kanigeri2@xxxxxx>
• Re: [linux-pm] [PATCH 0/8] Suspend block api (version 6)
  • From: Brian Swetland <swetland@xxxxxxxxxx>