On 05/21/10 12:35, Hemanth V wrote: > From: Hemanth V <hemanthv@xxxxxx> > Date: Fri, 21 May 2010 15:52:03 +0530 > Subject: [PATCH] misc: ROHM BH1780GLI Ambient light sensor Driver > > Corrected the mailing list, should be linux-kernel > > This patch adds support for ROHM BH1780GLI Ambient light sensor. > > BH1780 supports I2C interface. Driver supports read/update of power state and > read of lux value (through SYSFS). Writing value 3 to power_state enables the > sensor and current lux value could be read. Only comment here is that lux is the unit, but what we are measuring is illuminance. (see the whole debate that took place when working out the abi for the now defunct Ambient Light Sensors (ALS) frameowrk.) Hence I'd rather see the attribute being called illuminance. Acutally on that note, after the many abi debates, it probably makes sense to match hwmon conventions and call it, illuminance0_input. Nice simple driver. Up to you whether you change the attribute name. I know there are various namings in other drivers as things currently stand. That was what ALS was meant to clear up, but such is life. We're standardising in IIO on the above and will probably eat all the als drivers at somepoint given Linus isn't happy with them having their own subsystem. Acked-by: Jonathan Cameron <jic23@xxxxxxxxx> > > Signed-off-by: Hemanth V <hemanthv@xxxxxx> > --- > drivers/misc/Kconfig | 11 ++ > drivers/misc/Makefile | 1 + > drivers/misc/bh1780gli.c | 278 ++++++++++++++++++++++++++++++++++++++++++++++ > 3 files changed, 290 insertions(+), 0 deletions(-) > create mode 100644 drivers/misc/bh1780gli.c > > diff --git a/drivers/misc/Kconfig b/drivers/misc/Kconfig > index 0d0d625..0687a0c 100644 > --- a/drivers/misc/Kconfig > +++ b/drivers/misc/Kconfig > @@ -278,6 +278,17 @@ config SENSORS_TSL2550 > This driver can also be built as a module. If so, the module > will be called tsl2550. > > +config SENSORS_BH1780 > + tristate "ROHM BH1780GLI ambient light sensor" > + depends on I2C && SYSFS > + help > + If you say yes here you get support for the ROHM BH1780GLI > + ambient light sensor. > + > + This driver can also be built as a module. If so, the module > + will be called bh1780gli. > + > + > config EP93XX_PWM > tristate "EP93xx PWM support" > depends on ARCH_EP93XX > diff --git a/drivers/misc/Makefile b/drivers/misc/Makefile > index 7b6f7ee..c479d91 100644 > --- a/drivers/misc/Makefile > +++ b/drivers/misc/Makefile > @@ -30,3 +30,4 @@ obj-$(CONFIG_IWMC3200TOP) += iwmc3200top/ > obj-y += eeprom/ > obj-y += cb710/ > obj-$(CONFIG_VMWARE_BALLOON) += vmware_balloon.o > +obj-$(CONFIG_SENSORS_BH1780) += bh1780gli.o > diff --git a/drivers/misc/bh1780gli.c b/drivers/misc/bh1780gli.c > new file mode 100644 > index 0000000..9b4137d > --- /dev/null > +++ b/drivers/misc/bh1780gli.c > @@ -0,0 +1,278 @@ > +/* > + * bh1780gli.c > + * ROHM Ambient Light Sensor Driver > + * > + * Copyright (C) 2010 Texas Instruments > + * Author: Hemanth V <hemanthv@xxxxxx> > + * > + * This program is free software; you can redistribute it and/or modify it > + * under the terms of the GNU General Public License version 2 as published by > + * the Free Software Foundation. > + * > + * This program is distributed in the hope that it will be useful, but WITHOUT > + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or > + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for > + * more details. > + * > + * You should have received a copy of the GNU General Public License along with > + * this program. If not, see <http://www.gnu.org/licenses/>. > + */ > +#include <linux/i2c.h> > +#include <linux/slab.h> > +#include <linux/mutex.h> > +#include <linux/platform_device.h> > +#include <linux/delay.h> > + > +#define BH1780_REG_CONTROL 0x80 > +#define BH1780_REG_PARTID 0x8A > +#define BH1780_REG_MANFID 0x8B > +#define BH1780_REG_DLOW 0x8C > +#define BH1780_REG_DHIGH 0x8D > + > +#define BH1780_REVMASK (0xf) > +#define BH1780_POWMASK (0x3) > +#define BH1780_POFF (0x0) > +#define BH1780_PON (0x3) > + > +/* power on settling time in ms */ > +#define BH1780_PON_DELAY 2 > + > +struct bh1780_data { > + struct i2c_client *client; > + int power_state; > + /* lock for sysfs operations */ > + struct mutex lock; > +}; > + > +int bh1780_write(struct bh1780_data *ddata, u8 reg, u8 val, char *msg) > +{ > + int ret = i2c_smbus_write_byte_data(ddata->client, reg, val); > + if (ret < 0) > + dev_err(&ddata->client->dev, > + "i2c_smbus_write_byte_data failed error %d\ > + Register (%s)\n", ret, msg); > + return ret; > +} > + > +int bh1780_read(struct bh1780_data *ddata, u8 reg, char *msg) > +{ > + int ret = i2c_smbus_read_byte_data(ddata->client, reg); > + if (ret < 0) > + dev_err(&ddata->client->dev, > + "i2c_smbus_read_byte_data failed error %d\ > + Register (%s)\n", ret, msg); > + return ret; > +} > + > +static ssize_t bh1780_show_lux(struct device *dev, > + struct device_attribute *attr, char *buf) > +{ > + > + struct platform_device *pdev = to_platform_device(dev); > + struct bh1780_data *ddata = platform_get_drvdata(pdev); > + int lsb, msb; > + > + lsb = bh1780_read(ddata, BH1780_REG_DLOW, "DLOW"); > + if (lsb < 0) > + return lsb; > + > + msb = bh1780_read(ddata, BH1780_REG_DHIGH, "DHIGH"); > + if (msb < 0) > + return msb; > + > + return sprintf(buf, "%d\n", (msb << 8) | lsb); > +} > + > +static ssize_t bh1780_show_power_state(struct device *dev, > + struct device_attribute *attr, > + char *buf) > +{ > + struct platform_device *pdev = to_platform_device(dev); > + struct bh1780_data *ddata = platform_get_drvdata(pdev); > + int state; > + > + state = bh1780_read(ddata, BH1780_REG_CONTROL, "CONTROL"); > + if (state < 0) > + return state; > + > + return sprintf(buf, "%d\n", state & BH1780_POWMASK); > +} > + > +static ssize_t bh1780_store_power_state(struct device *dev, > + struct device_attribute *attr, > + const char *buf, size_t count) > +{ > + struct platform_device *pdev = to_platform_device(dev); > + struct bh1780_data *ddata = platform_get_drvdata(pdev); > + unsigned long val; > + int error; > + > + error = strict_strtoul(buf, 0, &val); > + if (error) > + return error; > + > + if (val < BH1780_POFF || val > BH1780_PON) > + return -EINVAL; > + > + mutex_lock(&ddata->lock); > + > + error = bh1780_write(ddata, BH1780_REG_CONTROL, val, "CONTROL"); > + if (error < 0) { > + mutex_unlock(&ddata->lock); > + return error; > + } > + > + msleep(BH1780_PON_DELAY); > + ddata->power_state = val; > + mutex_unlock(&ddata->lock); > + return count; > + > +} > + > +static DEVICE_ATTR(lux, S_IRUGO, bh1780_show_lux, NULL); > + > +static DEVICE_ATTR(power_state, S_IWUSR | S_IRUGO, > + bh1780_show_power_state, bh1780_store_power_state); > + > +static struct attribute *bh1780_attributes[] = { > + &dev_attr_power_state.attr, > + &dev_attr_lux.attr, > + NULL > +}; > + > +static const struct attribute_group bh1780_attr_group = { > + .attrs = bh1780_attributes, > +}; > + > +static int __devinit bh1780_probe(struct i2c_client *client, > + const struct i2c_device_id *id) > +{ > + int ret; > + struct bh1780_data *ddata = NULL; > + struct i2c_adapter *adapter = to_i2c_adapter(client->dev.parent); > + > + if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE)) { > + ret = -EIO; > + goto err_op_failed; > + } > + > + ddata = kzalloc(sizeof(struct bh1780_data), GFP_KERNEL); > + if (ddata == NULL) { > + ret = -ENOMEM; > + goto err_op_failed; > + } > + > + ddata->client = client; > + i2c_set_clientdata(client, ddata); > + > + ret = bh1780_read(ddata, BH1780_REG_PARTID, "PART ID"); > + if (ret < 0) > + goto err_op_failed; > + > + dev_info(&client->dev, "Ambient Light Sensor, Rev : %d\n", > + (ret & BH1780_REVMASK)); > + > + mutex_init(&ddata->lock); > + > + ret = sysfs_create_group(&client->dev.kobj, &bh1780_attr_group); > + if (ret) > + goto err_op_failed; > + > + return 0; > + > +err_op_failed: > + if (ddata != NULL) > + kfree(ddata); > + > + return ret; > +} > + > +static int __devexit bh1780_remove(struct i2c_client *client) > +{ > + struct bh1780_data *ddata; > + > + ddata = i2c_get_clientdata(client); > + sysfs_remove_group(&client->dev.kobj, &bh1780_attr_group); > + > + if (ddata != NULL) { > + i2c_set_clientdata(client, NULL); > + kfree(ddata); > + } > + > + return 0; > +} > + > +#ifdef CONFIG_PM > +static int bh1780_suspend(struct i2c_client *client, pm_message_t mesg) > +{ > + struct bh1780_data *ddata; > + int state, ret; > + > + ddata = i2c_get_clientdata(client); > + state = bh1780_read(ddata, BH1780_REG_CONTROL, "CONTROL"); > + if (state < 0) > + return state; > + > + ddata->power_state = state & BH1780_POWMASK; > + > + ret = bh1780_write(ddata, BH1780_REG_CONTROL, BH1780_POFF, > + "CONTROL"); > + > + if (ret < 0) > + return ret; > + > + return 0; > +} > + > +static int bh1780_resume(struct i2c_client *client) > +{ > + struct bh1780_data *ddata; > + int state, ret; > + > + ddata = i2c_get_clientdata(client); > + state = ddata->power_state; > + > + ret = bh1780_write(ddata, BH1780_REG_CONTROL, state, > + "CONTROL"); > + > + if (ret < 0) > + return ret; > + > + return 0; > +} > +#endif > + > +static const struct i2c_device_id bh1780_id[] = { > + { "bh1780", 0 }, > + { }, > +}; > + > +static struct i2c_driver bh1780_driver = { > + .probe = bh1780_probe, > + .remove = bh1780_remove, > + .id_table = bh1780_id, > +#ifdef CONFIG_PM > + .suspend = bh1780_suspend, > + .resume = bh1780_resume, > +#endif > + .driver = { > + .name = "bh1780" > + }, > +}; > + > +static int __init bh1780_init(void) > +{ > + return i2c_add_driver(&bh1780_driver); > +} > + > +static void __exit bh1780_exit(void) > +{ > + i2c_del_driver(&bh1780_driver); > +} > + > +module_init(bh1780_init) > +module_exit(bh1780_exit) > + > +MODULE_DESCRIPTION("BH1780GLI Ambient Light Sensor Driver"); > +MODULE_LICENSE("GPL"); > +MODULE_AUTHOR("Hemanth V <hemanthv@xxxxxx>"); -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
