Re: [PATCH v4 0/5] Adding MMC Support on OMAP4430 SDP

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




----- Original Message ----- From: "Tony Lindgren" <tony@xxxxxxxxxxx>
To: "kishore kadiyala" <kishore.kadiyala@xxxxxx>
Cc: <linux-mmc@xxxxxxxxxxxxxxx>; <linux-omap@xxxxxxxxxxxxxxx>; <madhu.cr@xxxxxx>; <jarkko.lavinen@xxxxxxxxx>; <rmk@xxxxxxxxxxxxxxxx>; <paul@xxxxxxxxx>; <santosh.shilimkar@xxxxxx>
Sent: Wednesday, May 19, 2010 5:39 AM
Subject: Re: [PATCH v4 0/5] Adding MMC Support on OMAP4430 SDP


* Tony Lindgren <tony@xxxxxxxxxxx> [100517 19:45]:
Hi,

* kishore kadiyala <kishore.kadiyala@xxxxxx> [100515 11:15]:
> Adding MMC1 and MMC2 controllers support for OMAP4
>
> V4:
> - Rebased to "for_next" branch[LO].
> - The first 3 patches [1,2,3] in the series are Minimal set of changes
>   with which MMC1/MMC2 works [No card detect for MMC1]on OMAP4 but with
>   dependencies on following patches [Not in "for_next" branch]
>   [1] I2c patches
>       a)https://patchwork.kernel.org/patch/98937/
>       b)https://patchwork.kernel.org/patch/98936/
>       c)https://patchwork.kernel.org/patch/98939/
>       d)https://patchwork.kernel.org/patch/79735/

I've taken the updated versions of the I2C patches,
and fixed them not to break omap3_defconfig.

>   [2] Regulator pacth
>       a)https://patchwork.kernel.org/patch/94054/
>   [3] hsmmc-clk patch
>       a)https://patchwork.kernel.org/patch/96821/

I've picked up these too.

> - The patches 4,5 adds card detect feature for MMC1

I only took 1 - 3 out of the MMC patches, it's too
late to start changing the other stuff.

I've reposted the whole series for a quick review.

FYI, the MMC on omap4 is not quite there yet at least
on my board. It mostly detects the card with
omap_4430sdp_defconfig, but fails always unless
CONFIG_RTC_DRV_TWL92330=y.. This is without CONFIG_SMP
as it oopses.

Hope you are referring CONFIG_RTC_DRV_TWL92330 to omap3_defconfig
and not to omap_4430sdp_defconfig.

With omap_4430sdp_defconfig , I've tested on 4430SDP and Blaze and always
Cards on MMC1 & MMC2 gets detected once bootedup.


Also MMC is never detected with omap3_defconfig.

With omap3_defconfig  +  disabling "CONFIG_OMAP_RESET_CLOCKS",
I've tested on 4430SDP and Blaze and always Cards on MMC1 & MMC2
gets detected on bootup.


Santosh & Kishore, maybe take a look at that, otherwise
it looks like we still don't have a very usable support
for omap4.

I've piled all these patches into linux-omap master branch
for easy testing. Let me know if I missed some patch.

Following is the commit ID :1674c0ceabfb7726246989874bb4da7bcb55ea89
used on LO master branch for testing. All the patches were merged.

Regards,
Kishore


Regards,

Tony


--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[Index of Archives]     [Linux Arm (vger)]     [ARM Kernel]     [ARM MSM]     [Linux Tegra]     [Linux WPAN Networking]     [Linux Wireless Networking]     [Maemo Users]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite Trails]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux