Linux Kernel I2C Bus Layer
[Prev Page][Next Page]
- [PATCH 350/606] media: i2c/mt9m032: Convert to i2c's .probe_new(), (continued)
- [PATCH 350/606] media: i2c/mt9m032: Convert to i2c's .probe_new(), Uwe Kleine-König
- [PATCH 268/606] leds: bd2802: Convert to i2c's .probe_new(), Uwe Kleine-König
- [PATCH 280/606] leds: lp5523: Convert to i2c's .probe_new(), Uwe Kleine-König
- [PATCH 229/606] Input: bu21013_ts - Convert to i2c's .probe_new(), Uwe Kleine-König
- [PATCH 460/606] mfd: stmfx: Convert to i2c's .probe_new(), Uwe Kleine-König
- [PATCH 363/606] media: i2c/s5k4ecgx: Convert to i2c's .probe_new(), Uwe Kleine-König
- [PATCH 324/606] media: i2c/ad9389b: Convert to i2c's .probe_new(), Uwe Kleine-König
- [PATCH 416/606] mfd: act8945a: Convert to i2c's .probe_new(), Uwe Kleine-König
- [PATCH 539/606] regulator: ad5398: Convert to i2c's .probe_new(), Uwe Kleine-König
- [PATCH 475/606] mfd: twl-core: Convert to i2c's .probe_new(), Uwe Kleine-König
- [PATCH 074/606] iio: chemical: atlas-ezo-sensor: Convert to i2c's .probe_new(), Uwe Kleine-König
- [PATCH 439/606] mfd: max77620: Convert to i2c's .probe_new(), Uwe Kleine-König
- [PATCH 500/606] net/mlx5: Convert to i2c's .probe_new(), Uwe Kleine-König
- [PATCH 276/606] leds: lm3697: Convert to i2c's .probe_new(), Uwe Kleine-König
- [PATCH 233/606] Input: cy8ctmg110_ts - Convert to i2c's .probe_new(), Uwe Kleine-König
- [PATCH 267/606] Input: zforce_ts - Convert to i2c's .probe_new(), Uwe Kleine-König
- [PATCH 515/606] power: supply: bq24190: Convert to i2c's .probe_new(), Uwe Kleine-König
- [PATCH 571/606] serial: sc16is7xx: Convert to i2c's .probe_new(), Uwe Kleine-König
- [PATCH 182/606] iio: proximity: rfd77402: Convert to i2c's .probe_new(), Uwe Kleine-König
- [PATCH 255/606] Input: rohm_bu21023 - Convert to i2c's .probe_new(), Uwe Kleine-König
- [PATCH 474/606] mfd: tps65912-i2c: Convert to i2c's .probe_new(), Uwe Kleine-König
- [PATCH 035/606] drm/bridge: ti-sn65dsi83: Convert to i2c's .probe_new(), Uwe Kleine-König
- [PATCH 329/606] media: i2c/adv7183: Convert to i2c's .probe_new(), Uwe Kleine-König
- [PATCH 250/606] Input: melfas_mip4 - Convert to i2c's .probe_new(), Uwe Kleine-König
- [PATCH 535/606] power: supply: ucs1002: Convert to i2c's .probe_new(), Uwe Kleine-König
- [PATCH 187/606] iio: temperature: tmp006: Convert to i2c's .probe_new(), Uwe Kleine-König
- [PATCH 487/606] misc: eeprom/eeprom: Convert to i2c's .probe_new(), Uwe Kleine-König
- [PATCH 349/606] media: i2c/msp3400-driver: Convert to i2c's .probe_new(), Uwe Kleine-König
- [PATCH 461/606] mfd: stmpe-i2c: Convert to i2c's .probe_new(), Uwe Kleine-König
- [PATCH 468/606] mfd: tps6507x: Convert to i2c's .probe_new(), Uwe Kleine-König
- [PATCH 604/606] ASoC: codecs: tas2780: Convert to i2c's .probe_new(), Uwe Kleine-König
- Re: [PATCH 000/606] i2c: Complete conversion to i2c_probe_new, patchwork-bot+chrome-platform
- Re: [PATCH 000/606] i2c: Complete conversion to i2c_probe_new, patchwork-bot+chrome-platform
- Re: [PATCH 000/606] i2c: Complete conversion to i2c_probe_new, Wolfram Sang
- Re: [PATCH 000/606] i2c: Complete conversion to i2c_probe_new, Sebastian Reichel
- Re: [PATCH 000/606] i2c: Complete conversion to i2c_probe_new, Lee Jones
- Re: [PATCH 000/606] i2c: Complete conversion to i2c_probe_new, Jonathan Cameron
- Re: (subset) [PATCH 000/606] i2c: Complete conversion to i2c_probe_new, Robert Foss
- Re: (subset) [PATCH 000/606] i2c: Complete conversion to i2c_probe_new, Robert Foss
- Re: [PATCH v2 1/6] dt-bindings: qcom: geni-se: document I2C Master Hub wrapper variant, Rob Herring
- general protection fault in az6027_i2c_xfer, Wei Chen
- [PATCH v2 0/6] soc: qcom: add support for the I2C Master Hub,
Neil Armstrong
- [PATCH] i2c: tegra: Set ACPI node as primary fwnode,
Akhil R
- [PATCH v1 1/2] i2c: loongson: add bus driver for the loongson i2c controller,
Yinbo Zhu
- [PATCH 0/6] soc: qcom: add support for the I2C Master Hub,
Neil Armstrong
- [PATCH] i2c: imx: add irqf_no_suspend flag,
Clark Wang
- [PATCH] dt-bindings: i2c: renesas,riic: Document RZ/Five SoC,
Prabhakar
- [PATCH] i2c: synquacer: fix missing clk_disable_unprepare() on error path, Hui Tang
- [PATCH v3 00/13] Enable USB host and device functions on Jetson,
Wayne Chang
- [PATCH v3 02/13] dt-bindings: usb: Add NVIDIA Tegra234 XUSB host controller binding, Wayne Chang
- [PATCH v3 04/13] arm64: tegra: Enable XUSB host and device on Jetson AGX Orin, Wayne Chang
- [PATCH v3 01/13] dt-bindings: usb: tegra-xudc: Add Tegra234 XUSB controller support, Wayne Chang
- [PATCH v3 03/13] dt-bindings: usb: Add binding for Cypress cypd4226 I2C driver, Wayne Chang
- [PATCH v3 10/13] phy: tegra: xusb: Disable trk clk when not in use, Wayne Chang
- [PATCH v3 11/13] phy: tegra: xusb: Add Tegra234 support, Wayne Chang
- [PATCH v3 08/13] usb: typec: ucsi_ccg: Remove ccgx,firmware-build property, Wayne Chang
- [PATCH v3 07/13] i2c: nvidia-gpu: Add cypress,firmware-build as a well-known regex, Wayne Chang
- [PATCH v3 12/13] usb: host: xhci-tegra: Add Tegra234 XHCI support, Wayne Chang
- [PATCH v3 13/13] usb: gadget: tegra-xudc: Add Tegra234 support, Wayne Chang
- [PATCH v3 06/13] usb: typec: ucsi_ccg: Add cypress,firmware-build as a well-known regex, Wayne Chang
- [PATCH v3 05/13] usb: typec: ucsi_ccg: Add OF support, Wayne Chang
- [PATCH v3 09/13] i2c: nvidia-gpu: Remove ccgx,firmware-build property, Wayne Chang
- Re: [PATCH v3 00/13] Enable USB host and device functions on Jetson, Jon Hunter
- [PATCH v6 0/1] i2c: Restore power status of device if probe fails,
Ricardo Ribalda
- [PATCH v2] i2c: smbus: add DDR support for SPD,
Corentin Labbe
- [PATCH] i2c-pxa2xx: fix missing pci_disable_device() on error in ce4100_i2c_probe,
Hui Tang
- [PATCH] i2c: mux: reg: Fix possible null-ptr-deref,
Hui Tang
- [PATCH v3 0/2] i2c: core: Introduce i2c_client_get_device_id helper,
Angel Iglesias
- Re: [PATCH v2] acpi,pci: handle duplicate IRQ routing entries returned from _PRT,
Bjorn Helgaas
- [PATCH v2 00/13] Enable USB host and device functions on Jetson,
Wayne Chang
- [PATCH v2 01/13] dt-bindings: usb: tegra-xudc: Add Tegra234 XUSB controller support, Wayne Chang
- [PATCH v2 02/13] dt-bindings: usb: Add NVIDIA Tegra234 XUSB host controller binding, Wayne Chang
- [PATCH v2 03/13] dt-bindings: usb: Add binding for Cypress cypd4226 I2C driver, Wayne Chang
- [PATCH v2 04/13] arm64: tegra: Enable XUSB host and device on Jetson AGX Orin, Wayne Chang
- [PATCH v2 07/13] i2c: nvidia-gpu: Add cypress,firmware-build as a well-known regex, Wayne Chang
- [PATCH v2 05/13] usb: typec: ucsi_ccg: Add OF support, Wayne Chang
- [PATCH v2 08/13] usb: typec: ucsi_ccg: Remove ccgx,firmware-build property, Wayne Chang
- [PATCH v2 06/13] usb: typec: ucsi_ccg: Add cypress,firmware-build as a well-known regex, Wayne Chang
- [PATCH v2 10/13] phy: tegra: xusb: Disable trk clk when not in use, Wayne Chang
- [PATCH v2 09/13] i2c: nvidia-gpu: Remove ccgx,firmware-build property, Wayne Chang
- [PATCH v2 11/13] phy: tegra: xusb: Add Tegra234 support, Wayne Chang
- [PATCH v2 12/13] usb: host: xhci-tegra: Add Tegra234 XHCI support, Wayne Chang
- [PATCH v2 13/13] usb: gadget: tegra-xudc: Add Tegra234 support, Wayne Chang
- [PATCH AUTOSEL 5.15 07/11] i2c: i801: add lis3lv02d's I2C address for Vostro 5568, Sasha Levin
- [PATCH AUTOSEL 5.15 06/11] i2c: tegra: Allocate DMA memory for DMA engine, Sasha Levin
- [PATCH AUTOSEL 5.4 2/5] i2c: i801: add lis3lv02d's I2C address for Vostro 5568, Sasha Levin
- [PATCH AUTOSEL 5.10 2/6] i2c: tegra: Allocate DMA memory for DMA engine, Sasha Levin
- [PATCH AUTOSEL 5.10 3/6] i2c: i801: add lis3lv02d's I2C address for Vostro 5568, Sasha Levin
- [PATCH AUTOSEL 6.0 15/30] i2c: i801: add lis3lv02d's I2C address for Vostro 5568, Sasha Levin
- [PATCH AUTOSEL 6.0 14/30] i2c: tegra: Allocate DMA memory for DMA engine, Sasha Levin
- [PATCH v5 0/1] i2c: Restore power status of device if probe fail or device is removed,
Ricardo Ribalda
- [PATCH v4 0/1] i2c: Restore power status of device if probe fail or device is removed,
Ricardo Ribalda
- [PATCH v3 0/1] i2c: Restore power status of device if probe fail or device is removed,
Ricardo Ribalda
- [PATCH] i2c: imx: use devm_platform_get_and_ioremap_resource(),
ye.xingchen
- [PATCH] i2c: imx: Only DMA messages with I2C_M_DMA_SAFE flag set,
Andrew Lunn
- [PATCH v2 0/1] i2c: Restore power status of device if probe fail or device is removed,
Ricardo Ribalda
- [PATCH v1 0/1] i2c: Restore power status of device if probe fails,
Ricardo Ribalda
- [PATCH] i2c: npcm7xx: Fix error handling in npcm_i2c_init(),
Yuan Can
- [PATCH v5] i2c: hisi: Add support to get clock frequency from clock property, Weilong Chen
- [PATCH] i2c: smbus: support new RAM variant for SPD,
Corentin Labbe
- [PATCH v3 00/12] i2c: designware: Slave fixes and generic cleanups,
Jarkko Nikula
- [PATCH v3 01/12] i2c: designware: Fix slave state machine for sequential reads, Jarkko Nikula
- [PATCH v3 03/12] i2c: designware: Define software status flags with BIT(), Jarkko Nikula
- [PATCH v3 02/12] i2c: designware: Empty receive FIFO in slave interrupt handler, Jarkko Nikula
- [PATCH v3 04/12] i2c: designware: Remove needless initializations from i2c_dw_reg_slave(), Jarkko Nikula
- [PATCH v3 05/12] i2c: designware: Remove unused completion code from i2c-designware-slave, Jarkko Nikula
- [PATCH v3 06/12] i2c: designware: Simplify slave interrupt handler nesting, Jarkko Nikula
- [PATCH v3 07/12] i2c: designware: Do not process interrupt when device is suspended, Jarkko Nikula
- [PATCH v3 08/12] i2c: designware: Move debug print in i2c_dw_isr(), Jarkko Nikula
- [PATCH v3 09/12] i2c: designware: Simplify master interrupt handler nesting, Jarkko Nikula
- [PATCH v3 10/12] i2c: designware: Remove common i2c_dw_disable_int(), Jarkko Nikula
- [PATCH v3 11/12] i2c: designware: Align defines in i2c-designware-core.h, Jarkko Nikula
- [PATCH v3 12/12] i2c: designware: Add comment to custom register value constants, Jarkko Nikula
- Re: [PATCH v3 00/12] i2c: designware: Slave fixes and generic cleanups, Wolfram Sang
- [PATCH v2 03/10] ARM: dts: suniv: f1c100s: add I2C DT nodes,
Andre Przywara
- [PATCH v2 0/2] i2c: core: Introduce i2c_client_get_device_id helper,
Angel Iglesias
- [PATCH v4 00/13] HID: ft260: fixes and performance improvements,
Michael Zaidman
- [PATCH v4 01/13] HID: ft260: ft260_xfer_status routine cleanup, Michael Zaidman
- [PATCH v4 05/13] HID: ft260: improve i2c large reads performance, Michael Zaidman
- [PATCH v4 03/13] HID: ft260: support i2c writes larger than HID report size, Michael Zaidman
- [PATCH v4 02/13] HID: ft260: improve i2c write performance, Michael Zaidman
- [PATCH v4 06/13] HID: ft260: do not populate /dev/hidraw device, Michael Zaidman
- [PATCH v4 04/13] HID: ft260: support i2c reads greater than HID report size, Michael Zaidman
- [PATCH v4 07/13] HID: ft260: skip unexpected HID input reports, Michael Zaidman
- [PATCH v4 08/13] HID: ft260: remove SMBus Quick command support, Michael Zaidman
- [PATCH v4 10/13] HID: ft260: wake up device from power saving mode, Michael Zaidman
- [PATCH v4 12/13] HID: ft260: missed NACK from busy device, Michael Zaidman
- [PATCH v4 13/13] HID: ft260: fix 'cast to restricted' kernel CI bot warnings, Michael Zaidman
- [PATCH v4 09/13] HID: ft260: missed NACK from big i2c read, Michael Zaidman
- [PATCH v4 11/13] HID: ft260: fix a NULL pointer dereference in ft260_i2c_write, Michael Zaidman
- Re: [PATCH v4 00/13] HID: ft260: fixes and performance improvements, Jiri Kosina
- IMX I2C driver and DMA mapping errors,
Andrew Lunn
- [PATCH v4] i2c/pasemi: PASemi I2C controller IRQ enablement,
Arminder Singh
- [PULL REQUEST] i2c-for-6.1-rc4,
Wolfram Sang
- [PATCH -next] i2c: amd-mp2: drop free_irq() of devm_request_irq() allocated irq,
Yang Yingliang
- [PATCH linux-next] i2c: npcm7xx: remove redundant ret variable, zhang.songyi
- Subject: [PATCH linux-next] i2c: npcm7xx: remove redundant ret variable, zhang.songyi
- [PATCH v2] Documentation: devres: add missing I2C helper,
Yang Yingliang
- [PATCH v2 00/12] i2c: designware: Slave fixes and generic cleanups,
Jarkko Nikula
- [PATCH v2 01/12] i2c: designware: Fix slave state machine for sequential reads, Jarkko Nikula
- [PATCH v2 02/12] i2c: designware: Empty receive FIFO in slave interrupt handler, Jarkko Nikula
- [PATCH v2 03/12] i2c: designware: Define software status flags with BIT(), Jarkko Nikula
- [PATCH v2 04/12] i2c: designware: Remove needless initializations from i2c_dw_reg_slave(), Jarkko Nikula
- [PATCH v2 06/12] i2c: designware: Simplify slave interrupt handler nesting, Jarkko Nikula
- [PATCH v2 05/12] i2c: designware: Remove unused completion code from i2c-designware-slave, Jarkko Nikula
- [PATCH v2 07/12] i2c: designware: Do not process interrupt when device is suspended, Jarkko Nikula
- [PATCH v2 08/12] i2c: designware: Move debug print in i2c_dw_isr(), Jarkko Nikula
- [PATCH v2 12/12] i2c: designware: Add comment to custom register value constants, Jarkko Nikula
- [PATCH v2 11/12] i2c: designware: Align defines in i2c-designware-core.h, Jarkko Nikula
- [PATCH v2 09/12] i2c: designware: Simplify master interrupt handler nesting, Jarkko Nikula
- [PATCH v2 10/12] i2c: designware: Remove common i2c_dw_disable_int(), Jarkko Nikula
- Re: [PATCH v2 00/12] i2c: designware: Slave fixes and generic cleanups, Andy Shevchenko
- [PATCH] Documentation: devres: add missing I2C helper,
Yang Yingliang
- [PATCH 4/9] ARM: dts: suniv: f1c100s: add I2C DT nodes,
Andre Przywara
- [PATCH 3/9] dt-bindings: i2c: mv64xxx: Add F1C100s compatible string,
Andre Przywara
- [PATCH v4 0/8] i2c-atr and FPDLink,
Tomi Valkeinen
- [PATCH v4 1/8] i2c: core: let adapters be notified of client attach/detach, Tomi Valkeinen
- [PATCH v4 2/8] i2c: add I2C Address Translator (ATR) support, Tomi Valkeinen
- [PATCH v4 4/8] dt-bindings: media: add bindings for TI DS90UB913, Tomi Valkeinen
- [PATCH v4 5/8] dt-bindings: media: add bindings for TI DS90UB953, Tomi Valkeinen
- [PATCH v4 3/8] dt-bindings: media: add bindings for TI DS90UB960, Tomi Valkeinen
- [PATCH v4 7/8] media: i2c: add DS90UB913 driver, Tomi Valkeinen
- [PATCH v4 6/8] media: i2c: add DS90UB960 driver, Tomi Valkeinen
- [PATCH v4 8/8] media: i2c: add DS90UB953 driver, Tomi Valkeinen
- Re: [PATCH v4 0/8] i2c-atr and FPDLink, Luca Ceresoli
- Re: [PATCH v4 0/8] i2c-atr and FPDLink, Vaittinen, Matti
- [PATCH AUTOSEL 4.14 4/4] i2c: xiic: Add platform module alias, Sasha Levin
- [PATCH AUTOSEL 4.9 3/3] i2c: xiic: Add platform module alias, Sasha Levin
- [PATCH AUTOSEL 5.4 8/8] i2c: xiic: Add platform module alias, Sasha Levin
- [PATCH AUTOSEL 4.19 6/6] i2c: xiic: Add platform module alias, Sasha Levin
- [PATCH AUTOSEL 5.10 14/14] i2c: xiic: Add platform module alias, Sasha Levin
- [PATCH AUTOSEL 5.15 19/19] i2c: xiic: Add platform module alias, Sasha Levin
- [PATCH AUTOSEL 6.0 33/34] i2c: xiic: Add platform module alias, Sasha Levin
- [PATCH next v10 1/2] i2c: hisi: Add initial device tree support,
Weilong Chen
- [PATCH v3 00/12] HID: ft260: fixes and performance improvements,
Michael Zaidman
- [PATCH v3 01/12] HID: ft260: ft260_xfer_status routine cleanup, Michael Zaidman
- [PATCH v3 05/12] HID: ft260: improve i2c large reads performance, Michael Zaidman
- [PATCH v3 04/12] HID: ft260: support i2c reads greater than HID report size, Michael Zaidman
- [PATCH v3 02/12] HID: ft260: improve i2c write performance, Michael Zaidman
- [PATCH v3 07/12] HID: ft260: skip unexpected HID input reports, Michael Zaidman
- [PATCH v3 03/12] HID: ft260: support i2c writes larger than HID report size, Michael Zaidman
- [PATCH v3 06/12] HID: ft260: do not populate /dev/hidraw device, Michael Zaidman
- [PATCH v3 08/12] HID: ft260: remove SMBus Quick command support, Michael Zaidman
- [PATCH v3 11/12] HID: ft260: fix a NULL pointer dereference in ft260_i2c_write, Michael Zaidman
- [PATCH v3 12/12] HID: ft260: missed NACK from busy device, Michael Zaidman
- [PATCH v3 09/12] HID: ft260: missed NACK from big i2c read, Michael Zaidman
- [PATCH v3 10/12] HID: ft260: wake up device from power saving mode, Michael Zaidman
- [RFC PATCH 0/2] i2c: core: Introduce i2c_client_get_device_id helper,
Angel Iglesias
- [PATCH next v9 1/4] i2c: hisi: Add initial device tree support,
Weilong Chen
- [PATCH RESEND] i2c: mux: reg: check return value after calling platform_get_resource(),
Yang Yingliang
- [PATCH v2] i2c: piix4: Fix adapter not be removed in piix4_remove(),
Chen Zhongjin
- [PATCH 00/11] i2c: designware: Slave fixes and generic cleanups,
Jarkko Nikula
- [PATCH 01/11] i2c: designware: Fix slave state machine for sequential reads, Jarkko Nikula
- [PATCH 05/11] i2c: designware: Remove unused completion code from i2c-designware-slave, Jarkko Nikula
- [PATCH 04/11] i2c: designware: Remove needless initializations from i2c_dw_reg_slave(), Jarkko Nikula
- [PATCH 02/11] i2c: designware: Empty receive FIFO in slave interrupt handler, Jarkko Nikula
- [PATCH 03/11] i2c: designware: Define software status flags with BIT(), Jarkko Nikula
- [PATCH 06/11] i2c: designware: Simplify slave interrupt handler nesting, Jarkko Nikula
- [PATCH 08/11] i2c: designware: Move debug print in i2c_dw_isr(), Jarkko Nikula
- [PATCH 07/11] i2c: designware: Do not process interrupt when device is suspended, Jarkko Nikula
- [PATCH 10/11] i2c: designware: Remove common i2c_dw_disable_int(), Jarkko Nikula
- [PATCH 09/11] i2c: designware: Simplify master interrupt handler nesting, Jarkko Nikula
- [PATCH 11/11] i2c: designware: Align defines in i2c-designware-core.h, Jarkko Nikula
- Re: [PATCH 00/11] i2c: designware: Slave fixes and generic cleanups, Andy Shevchenko
- [PATCH] i2c: amd-mp2: use msix/msi if the hardware supports,
Raju Rangoju
- [PATCH v2 0/2] fix fwnode_irq_get_byname() returnvalue,
Matti Vaittinen
- [PATCH 0/2] fix fwnode_irq_get_byname() returnvalue,
Matti Vaittinen
- NULL pointer dereferences in hid-mcp2221,
Sven Zühlsdorf
- [PATCH] i2c: piix4: Fix adapter not be removed in piix4_remove(),
Chen Zhongjin
- [PATCH 00/11] Enable USB host and device functions on Jetson,
Wayne Chang
- [PATCH 01/11] dt-bindings: usb: tegra-xudc: Add Tegra234 XUSB controller support, Wayne Chang
- [PATCH 02/11] dt-bindings: usb: Add NVIDIA Tegra XUSB host controller binding, Wayne Chang
- [PATCH 03/11] dt-bindings: usb: Add binding for Cypress cypd4226 I2C driver, Wayne Chang
- [PATCH 05/11] usb: typec: ucsi_ccg: Add OF support, Wayne Chang
- [PATCH 07/11] i2c: nvidia-gpu: Replace ccgx to well-known regex, Wayne Chang
- [PATCH 06/11] usb: typec: ucsi_ccg: Replace ccgx to well-known regex, Wayne Chang
- [PATCH 10/11] usb: host: xhci-tegra: Add Tegra234 XHCI support, Wayne Chang
- [PATCH 09/11] phy: tegra: xusb: Add Tegra234 support, Wayne Chang
- [PATCH 08/11] phy: tegra: xusb: Disable trk clk when not using, Wayne Chang
- [PATCH 11/11] usb: gadget: tegra-xudc: Add Tegra234 support, Wayne Chang
- [PATCH 04/11] arm64: tegra: Enable XUSB host and device on Jetson AGX Orin, Wayne Chang
- [PATCH next v8 1/2] i2c: hisi: Add initial device tree support,
Weilong Chen
- [PATCH] i2c: cadence: make bus recovery optional,
Michael Grzeschik
- [PULL REQUEST] i2c-for-6.1-rc2,
Wolfram Sang
- [PATCH 00/21] ARM: s3c: clean out obsolete platforms,
Arnd Bergmann
- Re: Money20/20 Attendees Data List 2022, Emiley Margaret
- [PATCH -next RESEND] HID: mcp2221: Remove unneeded semicolon, Yang Li
- [PATCH] pwm: pca9685: Convert to .probe_new(), Uwe Kleine-König
- [PATCH v1 0/5] i2c: Convert drivers below drivers/i2c to .probe_new(),
Uwe Kleine-König
- [PATCH next v7 1/2] i2c: hisi: Add initial device tree support,
Weilong Chen
- [PATCH 5/6] i2c: mlxbf: depend on ACPI; clean away ifdeffage,
Adam Borowski
- [PATCH 0/6] a pile of randconfig fixes,
Adam Borowski
- [PATCH] i2c: tegra: Allocate DMA memory for DMA engine,
Thierry Reding
- [PATCH] i2c: xiic: Make sure to disable clock on .remove(),
Uwe Kleine-König
- [PATCH 00/17] ARM: remove old board files,
Arnd Bergmann
- Message not available
[PATCH] i2c: fix repeated words in comments,
Jilin Yuan
[PATCH v3 0/2] Digiteq Automotive MGB4 driver,
tumic
RE: Registered Money20/20 Attendees Data Lists 2022, Randy Smith
[PATCH next v6 1/2] i2c: hisi: Add initial device tree support,
Weilong Chen
[PATCH v3 0/1] i2c: qcom-cci: pm runtime ordering fix,
Bryan O'Donoghue
[PATCH] drivers/i2c: use simple i2c probe,
Stephen Kitt
[PATCH] i2c: cp2615: prevent buffer overflow in cp2615_i2c_master_xfer(),
Dan Carpenter
[PATCH] i2c: dln2: prevent buffer overflow in dln2_i2c_write(),
Dan Carpenter
[PATCH] i2c: designware: slave should do WRITE_RECEIVED before SLAVE_STOP,
tianye
[PATCH AUTOSEL 5.19 70/73] i2c: designware-pci: Group AMD NAVI quirk parts together, Sasha Levin
[PATCH AUTOSEL 6.0 74/77] i2c: designware-pci: Group AMD NAVI quirk parts together, Sasha Levin
[PULL REQUEST] i2c-for-6.1-rc1-batch2,
Wolfram Sang
[PATCH -next] i2c: mlxbf: Fix unused-variable warning,
Ren Zhijie
[PATCH 0/2] Add mt7986 i2c support,
Frank Wunderlich
[PATCH] i2c: sis630: fix spelling typo in comment,
Jiangshan Yi
[PATCH] i2c: mlxcpld: fix spelling typo in comment,
Jiangshan Yi
[PATCH 1/2] i2c: npcm7xx: Group bank 0/1 registers together for readability,
Jonathan Neuschäfer
[v9 0/4] Add support for Maxim MAX735x/MAX736x variants,
Patrick Rudolph
[PATCH v3] i2c/pasemi: PASemi I2C controller IRQ enablement,
Arminder Singh
[PATCH] i2c: i801: add lis3lv02d's I2C address for Vostro 5568,
Nam Cao
i2c support linux 6.0 kernel, Marv Woolard
[PATCH][next] i2c: microchip: pci1xxxx: Fix comparison of -EPERM against an unsigned variable,
Colin Ian King
[Index of Archives]
[Linux USB Devel]
[Video for Linux]
[Big List of Linux Books]
[Linux SCSI]
[Yosemite Forum]