Add Zhaoxin I2C controller driver. It provides the access to the i2c busses, which connects to the touchpad, eeprom, etc. Zhaoxin I2C controller has two separate busses, so may accommodate up to two I2C adapters. Those adapters are listed in the ACPI namespace with the "IIC1D17" HID, and probed by a platform driver. The driver works with IRQ mode, and supports basic I2C features. Flags I2C_AQ_NO_ZERO_LEN and I2C_AQ_COMB_WRITE_THEN_READ are used to limit the unsupported access. Change since v3: * add maintainer for Zhaoxin I2C driver * add COMPILE_TEST in Kconfig * rename some marco and func with prefix zxi2c & ZXI2C * define some params and id as marco * remove redundant codes, MODULE_VERSION, .remove, etc. * reset fifo only once per access * enhance the process that the device is not ready * delete prints in zxi2c_probe(), system will prints when it goes wrong * fix other trivial issues checkout by coccinelle/sparse/smatch Link: https://lore.kernel.org/all/20230602050103.11223-1-hanshu-oc@xxxxxxxxxxx/ Change since v2: * fixed some code style issues * check if "timeout == 0" first, then check if event $condition is true Link: https://lore.kernel.org/all/20230531110058.n7ubjp2kzlx7tuoc@intel.intel/ Change since v1: * remove some useless include files and sort the rest. * use mmio bar distinguish host index. * use pci-dev's name and i2c-dev's name rename adapter's name. * remove some debug code, fix some code style issue. Link: https://lore.kernel.org/all/20230504060043.13155-1-hanshu-oc@xxxxxxxxxxx/ Signed-off-by: Hans Hu <hanshu-oc@xxxxxxxxxxx> --- MAINTAINERS | 7 + drivers/i2c/busses/Kconfig | 10 + drivers/i2c/busses/Makefile | 1 + drivers/i2c/busses/i2c-zhaoxin.c | 599 +++++++++++++++++++++++++++++++ 4 files changed, 617 insertions(+) create mode 100644 drivers/i2c/busses/i2c-zhaoxin.c diff --git a/MAINTAINERS b/MAINTAINERS index cb932c6f8959..bb61e19eef72 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -9761,6 +9761,13 @@ L: linux-i2c@xxxxxxxxxxxxxxx F: Documentation/i2c/busses/i2c-ismt.rst F: drivers/i2c/busses/i2c-ismt.c +ZHAOXIN I2C CONTROLLER DRIVER +M: Hans Hu <hanshu@xxxxxxxxxxx> +L: linux-i2c@xxxxxxxxxxxxxxx +S: Maintained +W: https://www.zhaoxin.com +F: drivers/i2c/busses/i2c-zhaoxin.c + I2C/SMBUS STUB DRIVER M: Jean Delvare <jdelvare@xxxxxxxx> L: linux-i2c@xxxxxxxxxxxxxxx diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig index 87600b4aacb3..1f181757ce2a 100644 --- a/drivers/i2c/busses/Kconfig +++ b/drivers/i2c/busses/Kconfig @@ -333,6 +333,16 @@ config I2C_VIAPRO This driver can also be built as a module. If so, the module will be called i2c-viapro. +config I2C_ZHAOXIN + tristate "ZHAOXIN I2C Interface" + depends on (PCI && ACPI) || COMPILE_TEST + help + If you say yes to this option, support will be included for the + ZHAOXIN I2C interface + + This driver can also be built as a module. If so, the module + will be called i2c-zhaoxin. + if ACPI comment "ACPI drivers" diff --git a/drivers/i2c/busses/Makefile b/drivers/i2c/busses/Makefile index af56fe2c75c0..cc470ce470ca 100644 --- a/drivers/i2c/busses/Makefile +++ b/drivers/i2c/busses/Makefile @@ -29,6 +29,7 @@ obj-$(CONFIG_I2C_SIS630) += i2c-sis630.o obj-$(CONFIG_I2C_SIS96X) += i2c-sis96x.o obj-$(CONFIG_I2C_VIA) += i2c-via.o obj-$(CONFIG_I2C_VIAPRO) += i2c-viapro.o +obj-$(CONFIG_I2C_ZHAOXIN) += i2c-zhaoxin.o # Mac SMBus host controller drivers obj-$(CONFIG_I2C_HYDRA) += i2c-hydra.o diff --git a/drivers/i2c/busses/i2c-zhaoxin.c b/drivers/i2c/busses/i2c-zhaoxin.c new file mode 100644 index 000000000000..1ffff9ccb6c1 --- /dev/null +++ b/drivers/i2c/busses/i2c-zhaoxin.c @@ -0,0 +1,599 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * i2c-zhaoxin-i2c.c - Zhaoxin I2C controller driver + * + * Copyright(c) 2023 Shanghai Zhaoxin Semiconductor Corporation. + * All rights reserved. + */ + +#include <linux/delay.h> +#include <linux/i2c.h> +#include <linux/pci.h> +#include <linux/platform_device.h> + +#define ZXI2C_NAME "Zhaoxin-I2C" + +/* + * registers + */ +/* I2C MMIO Address Constants */ +#define ZXI2C_CR_L 0x00 +#define ZXI2C_CPU_RDY BIT(3) +#define ZXI2C_TX_END BIT(2) +#define ZXI2C_RX_ACK BIT(1) +#define ZXI2C_CR_H 0x01 +#define ZXI2C_FIFO_EN BIT(6) +#define ZXI2C_SLVADDR 0x02 +#define ZXI2C_TCR 0x03 +#define ZXI2C_FAST_SEL BIT(7) +#define ZXI2C_MASTER_RECV BIT(6) +#define ZXI2C_HS_SEL BIT(5) +#define ZXI2C_SR 0x04 +#define ZXI2C_SDA_I BIT(3) +#define ZXI2C_SCL_I BIT(2) +#define ZXI2C_READY BIT(1) +#define ZXI2C_RCV_NACK BIT(0) +#define ZXI2C_ISR 0x06 +#define ZXI2C_STS_BYTENACK BIT(5) +#define ZXI2C_STS_FIFONACK BIT(4) +#define ZXI2C_STS_FIFOEND BIT(3) +#define ZXI2C_SCL_TIMEOUT BIT(2) +#define ZXI2C_STS_BYTEEND BIT(1) +#define ZXI2C_STS_ADDRNACK BIT(0) +#define ZXI2C_STS_MASK GENMASK(3, 0) +#define ZXI2C_IMR 0x08 +#define ZXI2C_EN_FIFOEND BIT(3) +#define ZXI2C_EN_TIMEOUT BIT(2) +#define ZXI2C_EN_BYTEEND BIT(1) +#define ZXI2C_EN_ADDRNACK BIT(0) +#define ZXI2C_M2C 0x0A +#define ZXI2C_C2M 0x0B +#define ZXI2C_FSTP 0x0C +#define ZXI2C_SCLTP 0x0D +#define ZXI2C_MCR 0x0E +#define ZXI2C_DYCLK_EN BIT(0) +#define ZXI2C_MST_CODE 0x0F +#define ZXI2C_CS 0x10 +#define ZXI2C_CLKSEL_50M BIT(0) +#define ZXI2C_REV 0x11 +#define ZXI2C_HCR 0x12 +#define ZXI2C_FIFO_RST GENMASK(1, 0) +#define ZXI2C_HTDR 0x13 +#define ZXI2C_HRDR 0x14 +#define ZXI2C_HTLR 0x15 +#define ZXI2C_HRLR 0x16 +#define ZXI2C_HWCNTR 0x18 +#define ZXI2C_HRCNTR 0x19 + +#define ZXI2C_RST_MASK 0xC1 +#define ZXI2C_WR_STP_MASK 0x45 +#define ZXI2C_FIFO_SIZE 32 +#define ZXI2C_TIMEOUT 1000 +#define ZXI2C_GOLDEN_FSTP_100K 0xF3 +#define ZXI2C_GOLDEN_FSTP_400K 0x38 +#define ZXI2C_GOLDEN_FSTP_1M 0x13 +#define ZXI2C_GOLDEN_FSTP_3400K 0x37 +#define ZXI2C_HS_MASTER_CODE 0x08 + +#define ZXI2C_PARENT_PCI_DID 0x1001 + +struct zxi2c { + /* controller resources information */ + struct device *dev; + struct pci_dev *pci; + struct i2c_adapter adap; + void __iomem *regs; + int irq; + u8 hrv; + u32 speed; + u8 fstp; /* freq control by BIOS */ + u8 reset_bitmask; + + /* process control information */ + u8 event; + u16 byte_left; + wait_queue_head_t waitq; + + /* processing msg information */ + u8 addr; + u16 len; + bool is_read; + bool is_last_msg; + u8 dynamic; +}; + +#define zxi2c_set_byte(r, d) iowrite8(d, r + ZXI2C_M2C) +#define zxi2c_get_byte(r) ioread8(r + ZXI2C_C2M) +#define zxi2c_is_ready(r) (ioread8(r + ZXI2C_SR) & ZXI2C_READY) +#define zxi2c_is_nack(r) (ioread8(r + ZXI2C_SR) & ZXI2C_RCV_NACK) +#define zxi2c_get_irq_status(r) ioread8(r + ZXI2C_ISR) +#define zxi2c_get_revison(r) ioread8(r + ZXI2C_REV) +#define zxi2c_clear_status(r) iowrite8(ZXI2C_STS_MASK, r + ZXI2C_ISR) +#define zxi2c_set_fifo_byte(r, d) iowrite8(d, r + ZXI2C_HTDR) +#define zxi2c_get_fifo_byte(r) ioread8(r + ZXI2C_HRDR) +#define zxi2c_set_fifo_wr_len(r, d) iowrite8(d, r + ZXI2C_HTLR) +#define zxi2c_set_fifo_rd_len(r, d) iowrite8(d, r + ZXI2C_HRLR) +#define zxi2c_get_fifo_wr_cnt(r) ioread8(r + ZXI2C_HWCNTR) +#define zxi2c_get_fifo_rd_cnt(r) ioread8(r + ZXI2C_HRCNTR) +#define zxi2c_master_reset(r) iowrite8(ZXI2C_RST_MASK, r + ZXI2C_CR_L) +#define zxi2c_set_dyn_clk(r, d) iowrite8(d, r + ZXI2C_MCR) +#define zxi2c_get_dyn_clk(r) ioread8(r + ZXI2C_MCR) +#define zxi2c_stop_wr(r) iowrite8(ZXI2C_WR_STP_MASK, r + ZXI2C_CR_L) +#define zxi2c_get_fstp_value(r) ioread8(r + ZXI2C_FSTP) +#define zxi2c_en_fifo_mode(r) iowrite8(ZXI2C_FIFO_EN, r + ZXI2C_CR_H) +#define zxi2c_en_byte_mode(r) iowrite8(0, r + ZXI2C_CR_H) + +static inline void zxi2c_prepare_next_read(void __iomem *regs, u16 left) +{ + u8 tmp = ioread8(regs + ZXI2C_CR_L); + + if (left > 1) + tmp &= ~ZXI2C_RX_ACK; + else + tmp |= ZXI2C_RX_ACK; + + iowrite8(tmp, regs + ZXI2C_CR_L); +} + +static inline void zxi2c_enable_irq(void __iomem *regs, u8 type, int enable) +{ + if (enable) + iowrite8(ZXI2C_EN_ADDRNACK | type, regs + ZXI2C_IMR); + else + iowrite8(0, regs + ZXI2C_IMR); +} + +static inline void zxi2c_continue(struct zxi2c *i2c) +{ + u8 tmp; + + i2c->event = 0; + tmp = ioread8(i2c->regs + ZXI2C_CR_L); + iowrite8(tmp |= ZXI2C_CPU_RDY, i2c->regs + ZXI2C_CR_L); +} + +static void zxi2c_reset_fifo(struct zxi2c *i2c) +{ + u8 tmp; + void __iomem *regs = i2c->regs; + + tmp = ioread8(regs + ZXI2C_HCR); + iowrite8(tmp | ZXI2C_FIFO_RST, regs + ZXI2C_HCR); + if (ioread8(regs + ZXI2C_HCR) & ZXI2C_FIFO_RST) + dev_warn(i2c->dev, "%s failed\n", __func__); +} + +static void zxi2c_set_wr(void __iomem *regs, bool is_read) +{ + u8 tmp; + + tmp = ioread8(regs + ZXI2C_TCR); + if (is_read) + tmp |= ZXI2C_MASTER_RECV; + else + tmp &= ~ZXI2C_MASTER_RECV; + iowrite8(tmp, regs + ZXI2C_TCR); +} + +static void zxi2c_start(struct zxi2c *i2c) +{ + i2c->event = 0; + iowrite8(i2c->addr & 0x7f, i2c->regs + ZXI2C_SLVADDR); +} + +static const u32 zxi2c_speed_params_table[][3] = { + /* speed, ZXI2C_TCR, ZXI2C_FSTP, ZXI2C_CS, ZXI2C_SCLTP */ + {I2C_MAX_STANDARD_MODE_FREQ, 0, ZXI2C_GOLDEN_FSTP_100K}, + {I2C_MAX_FAST_MODE_FREQ, ZXI2C_FAST_SEL, ZXI2C_GOLDEN_FSTP_400K}, + {I2C_MAX_FAST_MODE_PLUS_FREQ, ZXI2C_FAST_SEL, ZXI2C_GOLDEN_FSTP_1M}, + {I2C_MAX_HIGH_SPEED_MODE_FREQ, ZXI2C_HS_SEL, ZXI2C_GOLDEN_FSTP_3400K}, +}; + +static void zxi2c_set_bus_speed(struct zxi2c *i2c) +{ + u8 i, count; + const u32 *params = NULL; + + count = ARRAY_SIZE(zxi2c_speed_params_table); + for (i = 0; i < count; i++) { + if (zxi2c_speed_params_table[i][0] == i2c->speed) { + params = zxi2c_speed_params_table[i]; + break; + } + } + + iowrite8(params[1], i2c->regs + ZXI2C_TCR); + if (abs(i2c->fstp - params[2]) > 0x10) { + /* if BIOS setting value far from golden value, + * use golden value and warn user + */ + dev_warn_once(i2c->dev, "speed:%d, fstp:0x%x, golden:0x%x\n", + i2c->speed, i2c->fstp, params[2]); + iowrite8(params[2], i2c->regs + ZXI2C_FSTP); + } else { + iowrite8(i2c->fstp, i2c->regs + ZXI2C_FSTP); + } + + iowrite8(ZXI2C_CLKSEL_50M, i2c->regs + ZXI2C_CS); + iowrite8(0xff, i2c->regs + ZXI2C_SCLTP); + /* for Hs-mode, use 0000 1000 as master code */ + if (i2c->speed == I2C_MAX_HIGH_SPEED_MODE_FREQ) + iowrite8(ZXI2C_HS_MASTER_CODE, i2c->regs + ZXI2C_MST_CODE); +} + +static void zxi2c_get_bus_speed(struct zxi2c *i2c) +{ + u8 i, count; + u32 acpi_speed = i2c_acpi_find_bus_speed(i2c->dev); + + count = ARRAY_SIZE(zxi2c_speed_params_table); + for (i = 0; i < count; i++) + if (acpi_speed == zxi2c_speed_params_table[i][0]) + break; + + /* if not found, use 400k as default */ + i2c->speed = i < count ? acpi_speed : I2C_MAX_FAST_MODE_FREQ; + + dev_info(i2c->dev, "speed mode is %s\n", + i2c_freq_mode_string(i2c->speed)); +} + +static void zxi2c_module_reset(struct zxi2c *i2c) +{ + u8 tmp; + u8 bitmask = i2c->reset_bitmask; + + pci_read_config_byte(i2c->pci, 0x4F, &tmp); + pci_write_config_byte(i2c->pci, 0x4F, tmp & ~bitmask); + usleep_range(3000, 5000); + pci_write_config_byte(i2c->pci, 0x4F, tmp | bitmask); + usleep_range(3000, 5000); + + zxi2c_set_dyn_clk(i2c->regs, i2c->dynamic); +} + +static irqreturn_t zxi2c_irq_handle(int irq, void *dev_id) +{ + struct zxi2c *i2c = (struct zxi2c *)dev_id; + void __iomem *regs = i2c->regs; + u8 status = zxi2c_get_irq_status(regs); + + if ((status & ZXI2C_STS_MASK) == 0) + return IRQ_NONE; + + if (status & ZXI2C_SCL_TIMEOUT) + dev_warn(i2c->dev, "timeout(HW), ID: 0x%X\n", i2c->addr); + + if (status & ZXI2C_STS_ADDRNACK) { + dev_dbg(i2c->dev, "addr NACK, ID: 0x%X\n", i2c->addr); + } else if (status & ZXI2C_STS_BYTEEND) { + i2c->byte_left--; + if (!i2c->is_read) { + if (zxi2c_is_nack(regs)) { + status = ZXI2C_STS_BYTENACK; + i2c->byte_left++; + dev_err(i2c->dev, "data NACK, ID: 0x%X\n", + i2c->addr); + } else if (i2c->byte_left == 0 && i2c->is_last_msg) { + zxi2c_stop_wr(regs); + } + } + } + + i2c->event = status; + zxi2c_clear_status(regs); + wake_up(&i2c->waitq); + + return IRQ_HANDLED; +} + +static int zxi2c_wait_event(struct zxi2c *i2c, u8 event) +{ + int timeout; + + timeout = wait_event_interruptible_timeout(i2c->waitq, + i2c->event != 0, + msecs_to_jiffies(ZXI2C_TIMEOUT)); + + if (timeout == 0) { + dev_err(i2c->dev, "timeout(SW), ID: 0x%X\n", i2c->addr); + /* Clock streching timeout, do recovery */ + if (!zxi2c_is_nack(i2c->regs)) + dev_err(i2c->dev, "device hang? reset, ID: 0x%X\n", + i2c->addr); + + zxi2c_master_reset(i2c->regs); + zxi2c_set_bus_speed(i2c); + + return -EIO; + } + + if (i2c->event & event) { + if (timeout == 1) + dev_warn(i2c->dev, "thread may be blocked\n"); + return 0; + } + + return -EIO; +} + +static int zxi2c_byte_xfer(struct zxi2c *i2c, struct i2c_msg *msgs, int num) +{ + u16 i, finished; + u8 index; + int ret = 0; + struct i2c_msg *msg; + void __iomem *regs = i2c->regs; + + zxi2c_en_byte_mode(regs); + zxi2c_enable_irq(regs, ZXI2C_EN_BYTEEND, true); + + for (index = 0; index < num; index++) { + int err = 0; + + msg = msgs + index; + i2c->addr = msg->addr; + i2c->is_read = !!(msg->flags & I2C_M_RD); + i2c->byte_left = i2c->len = msg->len; + + zxi2c_set_wr(regs, i2c->is_read); + if (i2c->is_read) { + zxi2c_prepare_next_read(regs, i2c->byte_left); + zxi2c_start(i2c); + /* create restart for non-first msg */ + if (index) + zxi2c_continue(i2c); + + for (i = 1; i <= msg->len; i++) { + err = zxi2c_wait_event(i2c, ZXI2C_STS_BYTEEND); + if (err) + break; + + msg->buf[i - 1] = zxi2c_get_byte(regs); + if (i2c->byte_left == 0) + break; + + zxi2c_prepare_next_read(regs, i2c->byte_left); + zxi2c_continue(i2c); + } + } else { + zxi2c_set_byte(regs, msg->buf[0]); + /* mark whether this is the last msg */ + i2c->is_last_msg = index == !!(num - 1); + zxi2c_start(i2c); + /* create restart for non-first msg */ + if (index) + zxi2c_continue(i2c); + + for (i = 1; i <= msg->len; i++) { + err = zxi2c_wait_event(i2c, ZXI2C_STS_BYTEEND); + if (err) + break; + + if (i2c->byte_left == 0) + break; + zxi2c_set_byte(regs, msg->buf[i]); + zxi2c_continue(i2c); + } + } + + if (err) { + /* check if NACK during transmitting */ + finished = msg->len - i2c->byte_left; + if (finished) + dev_err(i2c->dev, + "%s: %s finished %d bytes: %*ph\n", + __func__, + i2c->is_read ? "read" : "write", + finished, finished, msg->buf); + return err; + } + ret++; + } + + zxi2c_enable_irq(regs, ZXI2C_EN_BYTEEND, false); + return ret; +} + +static int zxi2c_fifo_xfer(struct zxi2c *i2c, struct i2c_msg *msgs) +{ + void __iomem *regs = i2c->regs; + struct i2c_msg *msg = msgs; + int i; + u8 finished; + int err; + + i2c->addr = msg->addr; + i2c->is_read = !!(msg->flags & I2C_M_RD); + i2c->len = msg->len; + + zxi2c_reset_fifo(i2c); + zxi2c_en_fifo_mode(regs); + zxi2c_enable_irq(regs, ZXI2C_EN_FIFOEND, true); + + zxi2c_set_wr(regs, i2c->is_read); + if (i2c->is_read) { + zxi2c_set_fifo_rd_len(regs, msg->len - 1); + } else { + zxi2c_set_fifo_wr_len(regs, msg->len - 1); + for (i = 0; i < msg->len; i++) + zxi2c_set_fifo_byte(regs, msg->buf[i]); + } + + zxi2c_start(i2c); + err = zxi2c_wait_event(i2c, ZXI2C_STS_FIFOEND); + if (err) + return err; + + if (i2c->is_read) { + finished = zxi2c_get_fifo_rd_cnt(regs); + for (i = 0; i < finished; i++) + msg->buf[i] = zxi2c_get_fifo_byte(regs); + } else { + finished = zxi2c_get_fifo_wr_cnt(regs); + } + + /* check if NACK during transmitting */ + if (finished != msg->len) { + if (finished) + dev_err(i2c->dev, + "%s: %s only finished %d/%d bytes: %*ph\n", + __func__, i2c->is_read ? "read" : "write", + finished, msg->len, finished, msg->buf); + return -EAGAIN; + } + + zxi2c_enable_irq(regs, ZXI2C_EN_FIFOEND, false); + return 1; +} + +static int zxi2c_master_xfer(struct i2c_adapter *adap, + struct i2c_msg *msgs, int num) +{ + int err; + struct zxi2c *i2c = (struct zxi2c *)i2c_get_adapdata(adap); + + if (!zxi2c_is_ready(i2c->regs)) { + dev_warn(i2c->dev, "controller not ready\n"); + zxi2c_module_reset(i2c); + if (!zxi2c_is_ready(i2c->regs)) { + dev_err(i2c->dev, "controller can't reset to ready\n"); + return -EBUSY; + } + zxi2c_set_bus_speed(i2c); + } + + if (num == 1 && msgs->len <= ZXI2C_FIFO_SIZE && msgs->len >= 3) + err = zxi2c_fifo_xfer(i2c, msgs); + else + err = zxi2c_byte_xfer(i2c, msgs, num); + + return err; +} + +static u32 zxi2c_func(struct i2c_adapter *adap) +{ + return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL; +} + +static const struct i2c_algorithm zxi2c_algorithm = { + .master_xfer = zxi2c_master_xfer, + .functionality = zxi2c_func, +}; + +static const struct i2c_adapter_quirks zxi2c_quirks = { + .flags = I2C_AQ_NO_ZERO_LEN | I2C_AQ_COMB_WRITE_THEN_READ, +}; + +static int zxi2c_parse_resources(struct zxi2c *i2c) +{ + struct platform_device *pdev = to_platform_device(i2c->dev); + struct resource *res; + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + i2c->regs = devm_ioremap_resource(&pdev->dev, res); + if (IS_ERR(i2c->regs)) + return PTR_ERR(i2c->regs); + + if (res->start & 0x20) + i2c->reset_bitmask = BIT(4); + else + i2c->reset_bitmask = BIT(5); + + i2c->irq = platform_get_irq(pdev, 0); + if (i2c->irq < 0) + return i2c->irq; + + i2c->hrv = zxi2c_get_revison(i2c->regs); + i2c->dynamic = zxi2c_get_dyn_clk(i2c->regs); + + i2c->fstp = zxi2c_get_fstp_value(i2c->regs); + zxi2c_get_bus_speed(i2c); + zxi2c_set_bus_speed(i2c); + + return 0; +} + +static int zxi2c_probe(struct platform_device *pdev) +{ + int err = 0; + struct zxi2c *i2c; + struct pci_dev *pci; + struct device *dev; + + /* make sure this is zhaoxin platform */ + dev = pdev->dev.parent; + if (dev && dev_is_pci(dev)) { + pci = to_pci_dev(dev); + if (pci->vendor != PCI_VENDOR_ID_ZHAOXIN || + pci->device != ZXI2C_PARENT_PCI_DID) + return -ENODEV; + } else { + return -ENODEV; + } + + i2c = devm_kzalloc(&pdev->dev, sizeof(*i2c), GFP_KERNEL); + if (IS_ERR(i2c)) + return -ENOMEM; + + i2c->pci = pci; + i2c->dev = &pdev->dev; + err = zxi2c_parse_resources(i2c); + if (err) + return err; + + platform_set_drvdata(pdev, (void *)i2c); + + err = devm_request_irq(&pdev->dev, i2c->irq, zxi2c_irq_handle, + IRQF_SHARED, pdev->name, i2c); + if (err) + return err; + + init_waitqueue_head(&i2c->waitq); + + i2c->adap.owner = THIS_MODULE; + i2c->adap.algo = &zxi2c_algorithm; + i2c->adap.retries = 2; + i2c->adap.quirks = &zxi2c_quirks; + i2c->adap.dev.parent = &pdev->dev; + ACPI_COMPANION_SET(&i2c->adap.dev, ACPI_COMPANION(&pdev->dev)); + snprintf(i2c->adap.name, sizeof(i2c->adap.name), "%s-%s-%s", + ZXI2C_NAME, dev_name(&pci->dev), dev_name(i2c->dev)); + i2c_set_adapdata(&i2c->adap, i2c); + + return devm_i2c_add_adapter(&pdev->dev, &i2c->adap); +} + +static int zxi2c_resume(struct device *dev) +{ + struct zxi2c *i2c = dev_get_drvdata(dev); + + zxi2c_module_reset(i2c); + zxi2c_set_bus_speed(i2c); + + return 0; +} + +static const struct dev_pm_ops zxi2c_pm = { + SET_SYSTEM_SLEEP_PM_OPS(NULL, zxi2c_resume) +}; + +static const struct acpi_device_id zxi2c_acpi_match[] = { + {"IIC1D17", 0}, + {}, +}; +MODULE_DEVICE_TABLE(acpi, zxi2c_acpi_match); + +static struct platform_driver zxi2c_driver = { + .probe = zxi2c_probe, + .driver = { + .name = ZXI2C_NAME, + .acpi_match_table = zxi2c_acpi_match, + .pm = &zxi2c_pm, + }, +}; +module_platform_driver(zxi2c_driver); + +MODULE_AUTHOR("HansHu@xxxxxxxxxxx"); +MODULE_DESCRIPTION("Shanghai Zhaoxin IIC driver"); +MODULE_LICENSE("GPL"); -- 2.17.1
