Re: [RFC PATCH v2 5/6] i2c: aspeed: Set the fwnode for the adap->dev

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Tue, May 30, 2023 at 5:58 PM Jonathan Cameron
<Jonathan.Cameron@xxxxxxxxxx> wrote:
>
> This is needed for the bus matching used for ACPI based
> i2c client registration.

The right thing to do.
Reviewed-by: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>

> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
> ---
> v2: Drop the separate setting of the of_node. (Thanks Andy)
> ---
>  drivers/i2c/busses/i2c-aspeed.c | 3 ++-
>  1 file changed, 2 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/i2c/busses/i2c-aspeed.c b/drivers/i2c/busses/i2c-aspeed.c
> index 353834d7ffd5..ae8e187f2233 100644
> --- a/drivers/i2c/busses/i2c-aspeed.c
> +++ b/drivers/i2c/busses/i2c-aspeed.c
> @@ -1017,7 +1017,6 @@ static int aspeed_i2c_probe_bus(struct platform_device *pdev)
>         bus->adap.retries = 0;
>         bus->adap.algo = &aspeed_i2c_algo;
>         bus->adap.dev.parent = &pdev->dev;
> -       bus->adap.dev.of_node = pdev->dev.of_node;
>         strscpy(bus->adap.name, pdev->name, sizeof(bus->adap.name));
>         i2c_set_adapdata(&bus->adap, bus);
>
> @@ -1043,6 +1042,8 @@ static int aspeed_i2c_probe_bus(struct platform_device *pdev)
>         if (ret < 0)
>                 return ret;
>
> +       device_set_node(&bus->adap.dev, dev_fwnode(&pdev->dev));
> +
>         ret = i2c_add_adapter(&bus->adap);
>         if (ret < 0)
>                 return ret;
> --
> 2.39.2
>


-- 
With Best Regards,
Andy Shevchenko




[Index of Archives]     [Linux GPIO]     [Linux SPI]     [Linux Hardward Monitoring]     [LM Sensors]     [Linux USB Devel]     [Linux Media]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux