Add support for FPD-Link non-sync mode with external clock. The only
thing that needs to be added is the calculation for the clkout.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@xxxxxxxxxxxxxxxx>
---
drivers/media/i2c/ds90ub953.c | 34 ++++++++++++++++++++++++++--------
1 file changed, 26 insertions(+), 8 deletions(-)
diff --git a/drivers/media/i2c/ds90ub953.c b/drivers/media/i2c/ds90ub953.c
index ff55740965eb..ae90a647489a 100644
--- a/drivers/media/i2c/ds90ub953.c
+++ b/drivers/media/i2c/ds90ub953.c
@@ -143,6 +143,7 @@ struct ub953_data {
struct i2c_client *client;
struct regmap *regmap;
+ struct clk *clkin;
u32 num_data_lanes;
bool non_cont_clk;
@@ -842,15 +843,21 @@ static int ub953_i2c_master_init(struct ub953_data *priv)
static u64 ub953_get_fc_rate(struct ub953_data *priv)
{
- if (priv->mode != UB953_MODE_SYNC) {
+ switch (priv->mode) {
+ case UB953_MODE_SYNC:
+ if (priv->hw_data->is_ub971)
+ return priv->plat_data->bc_rate * 160ull;
+ else
+ return priv->plat_data->bc_rate / 2 * 160ull;
+
+ case UB953_MODE_NONSYNC_EXT:
+ /* CLKIN_DIV = 1 always */
+ return clk_get_rate(priv->clkin) * 80ull;
+
+ default:
/* Not supported */
return 0;
}
-
- if (priv->hw_data->is_ub971)
- return priv->plat_data->bc_rate * 160ull;
- else
- return priv->plat_data->bc_rate / 2 * 160ull;
}
static unsigned long ub953_calc_clkout_ub953(struct ub953_data *priv,
@@ -1189,9 +1196,15 @@ static int ub953_hw_init(struct ub953_data *priv)
dev_dbg(dev, "mode from %s: %#x\n", mode_override ? "reg" : "strap",
priv->mode);
- if (priv->mode != UB953_MODE_SYNC)
+ if (priv->mode != UB953_MODE_SYNC &&
+ priv->mode != UB953_MODE_NONSYNC_EXT)
return dev_err_probe(dev, -ENODEV,
- "Only synchronous mode supported\n");
+ "Unsupported mode selected: %d\n",
+ priv->mode);
+
+ if (priv->mode == UB953_MODE_NONSYNC_EXT && !priv->clkin)
+ return dev_err_probe(dev, -EINVAL,
+ "clkin required for non-sync ext mode\n");
ret = ub953_read(priv, UB953_REG_REV_MASK_ID, &v);
if (ret)
@@ -1319,6 +1332,11 @@ static int ub953_probe(struct i2c_client *client)
goto err_mutex_destroy;
}
+ priv->clkin = devm_clk_get_optional(dev, "clkin");
+ if (IS_ERR(priv->clkin))
+ return dev_err_probe(dev, PTR_ERR(priv->clkin),
+ "failed to parse 'clkin'\n");
+
ret = ub953_parse_dt(priv);
if (ret)
goto err_mutex_destroy;
--
2.34.1
