From: Gao Pan <pandy.gao@xxxxxxx>
Add debug message when i2c peripheral clk rate is 0, then
directly return -EINVAL.
Fixes: a55fa9d0e42e ("i2c: imx-lpi2c: add low power i2c bus driver")
Signed-off-by: Gao Pan <pandy.gao@xxxxxxx>
Signed-off-by: Carlos Song <carlos.song@xxxxxxx>
---
drivers/i2c/busses/i2c-imx-lpi2c.c | 5 +++++
1 file changed, 5 insertions(+)
diff --git a/drivers/i2c/busses/i2c-imx-lpi2c.c b/drivers/i2c/busses/i2c-imx-lpi2c.c
index 11240bf8e8e2..62111fe9f207 100644
--- a/drivers/i2c/busses/i2c-imx-lpi2c.c
+++ b/drivers/i2c/busses/i2c-imx-lpi2c.c
@@ -209,6 +209,11 @@ static int lpi2c_imx_config(struct lpi2c_imx_struct *lpi2c_imx)
lpi2c_imx_set_mode(lpi2c_imx);
clk_rate = clk_get_rate(lpi2c_imx->clks[0].clk);
+ if (!clk_rate) {
+ dev_dbg(&lpi2c_imx->adapter.dev, "clk_per rate is 0\n");
+ return -EINVAL;
+ }
+
if (lpi2c_imx->mode == HS || lpi2c_imx->mode == ULTRA_FAST)
filt = 0;
else
--
2.34.1
