Linux GPIO

• Thread Index

• Re: [RFC PATCH v2 02/13] dt-bindings: mfd: Document ROHM BD71828 bindings
  • From: Dan Murphy <dmurphy@xxxxxx>
• [PATCH] pinctrl: at91: Enable slewrate by default on SAM9X60
  • From: Codrin Ciubotariu <codrin.ciubotariu@xxxxxxxxxxxxx>
• Re: [PATCH v3 1/2] dt-bindings: gpio: brcm: Add bindings for xgs-iproc
  • From: Scott Branden <scott.branden@xxxxxxxxxxxx>
• Re: [PATCH v3 2/2] gpio: Add xgs-iproc driver
  • From: Scott Branden <scott.branden@xxxxxxxxxxxx>
• [PATCH v1 2/2] pinctrl: baytrail: Group GPIO IRQ chip initialization
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v1 1/2] pinctrl: baytrail: Allocate IRQ chip dynamic
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH] RFC: pinctrl: cherryview: Pass irqchip when adding gpiochip
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v1] pinctrl: cherryview: Allocate IRQ chip dynamic
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [RFC PATCH v2 12/13] gpio: bd71828: Initial support for ROHM BD71828 PMIC GPIOs
  • From: "Vaittinen, Matti" <Matti.Vaittinen@xxxxxxxxxxxxxxxxx>
• [PATCH] pinctrl: sh-pfc: sh7734: Fix duplicate TCLK1_B
  • From: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>
• Re: [PATCH v2] pinctrl: sh-pfc: Do not use platform_get_irq() to count interrupts
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• [PATCH v2 0/2] gpio: renesas: Use proper irq_chip name
  • From: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>
• [PATCH v2 2/2] gpio: rcar: Use proper irq_chip name
  • From: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>
• [PATCH v2 1/2] gpio: em: Use proper irq_chip name
  • From: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>
• Re: [PATCH v2] pinctrl: sh-pfc: Do not use platform_get_irq() to count interrupts
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH -next] pinctrl: mvebu: use devm_platform_ioremap_resource() to simplify code
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH -next] pinctrl: mediatek: use devm_platform_ioremap_resource() to simplify code
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [RFC PATCH v2 12/13] gpio: bd71828: Initial support for ROHM BD71828 PMIC GPIOs
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• [RFC PATCH v2 13/13] led: bd71828: Support LED outputs on ROHM BD71828 PMIC
  • From: Matti Vaittinen <matti.vaittinen@xxxxxxxxxxxxxxxxx>
• [RFC PATCH v2 12/13] gpio: bd71828: Initial support for ROHM BD71828 PMIC GPIOs
  • From: Matti Vaittinen <matti.vaittinen@xxxxxxxxxxxxxxxxx>
• [RFC PATCH v2 11/13] rtc: bd70528 add BD71828 support
  • From: Matti Vaittinen <matti.vaittinen@xxxxxxxxxxxxxxxxx>
• [RFC PATCH v2 10/13] regulator: bd71828: Support in-kernel APIs to change run-level
  • From: Matti Vaittinen <matti.vaittinen@xxxxxxxxxxxxxxxxx>
• [RFC PATCH v2 09/13] regulator: bd71828: enhanced run-level support
  • From: Matti Vaittinen <matti.vaittinen@xxxxxxxxxxxxxxxxx>
• [RFC PATCH v2 08/13] regulator: bd71828: Add GPIO based run-level control for regulators
  • From: Matti Vaittinen <matti.vaittinen@xxxxxxxxxxxxxxxxx>
• [RFC PATCH v2 07/13] regulator: bd71828: Basic support for ROHM bd71828 PMIC regulators
  • From: Matti Vaittinen <matti.vaittinen@xxxxxxxxxxxxxxxxx>
• [RFC PATCH v2 06/13] regulator: bd718x7: Split driver to common and bd718x7 specific parts
  • From: Matti Vaittinen <matti.vaittinen@xxxxxxxxxxxxxxxxx>
• [RFC PATCH v2 05/13] clk: bd718x7: Support ROHM BD71828 clk block
  • From: Matti Vaittinen <matti.vaittinen@xxxxxxxxxxxxxxxxx>
• [RFC PATCH v2 04/13] mfd: input: bd71828: Add power-key support
  • From: Matti Vaittinen <matti.vaittinen@xxxxxxxxxxxxxxxxx>
• [RFC PATCH v2 03/13] dt-bindings: regulator: Document ROHM BD71282 regulator bindings
  • From: Matti Vaittinen <matti.vaittinen@xxxxxxxxxxxxxxxxx>
• [RFC PATCH v2 02/13] dt-bindings: mfd: Document ROHM BD71828 bindings
  • From: Matti Vaittinen <matti.vaittinen@xxxxxxxxxxxxxxxxx>
• [RFC PATCH v2 01/13] mfd: bd71828: Support ROHM BD71828 PMIC - core
  • From: Matti Vaittinen <matti.vaittinen@xxxxxxxxxxxxxxxxx>
• [RFC PATCH v2 00/13] Support ROHM BD71828 PMIC
  • From: Matti Vaittinen <matti.vaittinen@xxxxxxxxxxxxxxxxx>
• Re: [RFC PATCH 11/13] led: bd71828: Support LED outputs on ROHM BD71828 PMIC
  • From: "Vaittinen, Matti" <Matti.Vaittinen@xxxxxxxxxxxxxxxxx>
• Re: [PATCH v1] pinctrl: cherryview: Fix spelling mistake in the comment
  • From: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>
• [PATCH v3 2/2] gpio: Add xgs-iproc driver
  • From: Chris Packham <chris.packham@xxxxxxxxxxxxxxxxxxx>
• [PATCH v3 0/2] gpio: brcm: XGS iProc GPIO driver
  • From: Chris Packham <chris.packham@xxxxxxxxxxxxxxxxxxx>
• [PATCH v3 1/2] dt-bindings: gpio: brcm: Add bindings for xgs-iproc
  • From: Chris Packham <chris.packham@xxxxxxxxxxxxxxxxxxx>
• linusw/devel boot: 34 boots: 0 failed, 32 passed with 2 untried/unknown (v5.4-rc1-25-gfe12e94375da)
  • From: "kernelci.org bot" <bot@xxxxxxxxxxxx>
• linusw/devel build: 6 builds: 0 failed, 6 passed, 13 warnings (v5.4-rc1-25-gfe12e94375da)
  • From: "kernelci.org bot" <bot@xxxxxxxxxxxx>
• Re: [RFC PATCH 11/13] led: bd71828: Support LED outputs on ROHM BD71828 PMIC
  • From: Jacek Anaszewski <jacek.anaszewski@xxxxxxxxx>
• linusw/for-next boot: 39 boots: 0 failed, 39 passed (v5.4-rc4-28-gacba5fc211ee)
  • From: "kernelci.org bot" <bot@xxxxxxxxxxxx>
• linusw/fixes boot: 39 boots: 1 failed, 38 passed (v5.4-rc4-2-g459f7cb9a3b9)
  • From: "kernelci.org bot" <bot@xxxxxxxxxxxx>
• linusw/for-next build: 6 builds: 0 failed, 6 passed, 5 warnings (v5.4-rc4-28-gacba5fc211ee)
  • From: "kernelci.org bot" <bot@xxxxxxxxxxxx>
• linusw/fixes build: 6 builds: 0 failed, 6 passed, 5 warnings (v5.4-rc4-2-g459f7cb9a3b9)
  • From: "kernelci.org bot" <bot@xxxxxxxxxxxx>
• [PATCH v1] gpio: pca953x: Reduce stack usage in couple of functions
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH] gpio: bd70528: Add MODULE ALIAS to autoload module
  • From: Bartosz Golaszewski <bgolaszewski@xxxxxxxxxxxx>
• Re: [PATCH v2 00/11] gpio: pca953x: Convert to bitmap (extended) API
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• [PATCH v1] pinctrl: cherryview: Fix spelling mistake in the comment
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v1] spi: Fix spelling in the comments
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v1] spi: Fix spelling in the comments
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v3 2/4] pinctrl: meson: add a new dt parse callback for Meson-A series SoCs
  • From: Jerome Brunet <jbrunet@xxxxxxxxxxxx>
• Re: [PATCH v3 2/4] pinctrl: meson: add a new dt parse callback for Meson-A series SoCs
  • From: Qianggui Song <qianggui.song@xxxxxxxxxxx>
• [PATCH v2 0/3] pinctrl: sh-pfc: Add r8a77961 support
  • From: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>
• [PATCH v2 3/3] pinctrl: sh-pfc: r8a7796: Add R8A77961 PFC support
  • From: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>
• [PATCH v2 2/3] pinctrl: sh-pfc: Rename PINCTRL_PFC_R8A7796 to PINCTRL_PFC_R8A77960
  • From: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>
• [PATCH v2 1/3] dt-bindings: pinctrl: sh-pfc: Document r8a77961 support
  • From: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>
• [PATCH] gpio: bd70528: Add MODULE ALIAS to autoload module
  • From: Matti Vaittinen <matti.vaittinen@xxxxxxxxxxxxxxxxx>
• Re: [GIT PULL] gpio: updates for v5.5 - part 1
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [GIT PULL] gpio: fixes for v5.4-rc5
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [RFC PATCH 09/13] mfd: rtc: support RTC on ROHM BD71828 with BD70528 driver
  • From: "Vaittinen, Matti" <Matti.Vaittinen@xxxxxxxxxxxxxxxxx>
• Re: [PATCH v2] pinctrl: intel: Add Intel Tiger Lake pin controller support
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v2 0/5] pinctrl: intel: Refactor register restoring on resume
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v3] pinctrl: intel: baytrail: Pass irqchip when adding gpiochip
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v3 2/4] pinctrl: meson: add a new dt parse callback for Meson-A series SoCs
  • From: Jerome Brunet <jbrunet@xxxxxxxxxxxx>
• Re: [RFC PATCH 11/13] led: bd71828: Support LED outputs on ROHM BD71828 PMIC
  • From: "Vaittinen, Matti" <Matti.Vaittinen@xxxxxxxxxxxxxxxxx>
• Re: [PATCH v2 10/11] gpio: pca953x: Convert to use bitmap API
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: [PATCH v2 10/11] gpio: pca953x: Convert to use bitmap API
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v3] pinctrl: intel: baytrail: Pass irqchip when adding gpiochip
  • From: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>
• Re: [PATCH v2 0/5] pinctrl: intel: Refactor register restoring on resume
  • From: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>
• Re: [PATCH v2 10/11] gpio: pca953x: Convert to use bitmap API
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: [RFC PATCH 11/13] led: bd71828: Support LED outputs on ROHM BD71828 PMIC
  • From: Jacek Anaszewski <jacek.anaszewski@xxxxxxxxx>
• [PATCH v2 01/11] lib/test_bitmap: Force argument of bitmap_parselist_user() to proper address space
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v2 11/11] gpio: pca953x: Tight up indentation
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v2 08/11] gpio: pca953x: Remove redundant variable and check in IRQ handler
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v2 07/11] bitmap: Introduce bitmap_replace() helper
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v2 05/11] lib/test_bitmap: Move exp1 and exp2 upper for others to use
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v2 10/11] gpio: pca953x: Convert to use bitmap API
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v2 09/11] gpio: pca953x: Use input from regs structure in pca953x_irq_pending()
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v2 06/11] lib/test_bitmap: Fix comment about this file
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v2 02/11] lib/test_bitmap: Undefine macros after use
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v2 04/11] lib/test_bitmap: Rename exp to exp1 to avoid ambiguous name
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v2 03/11] lib/test_bitmap: Name EXP_BYTES properly
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v2 00/11] gpio: pca953x: Convert to bitmap (extended) API
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v2] dt-bindings: pinctrl: Convert Allwinner Pin Controller to a schema
  • From: Maxime Ripard <mripard@xxxxxxxxxx>
• [PATCH] pinctrl: amd: fix __iomem annotation in amd_gpio_irq_handler()
  • From: "Ben Dooks (Codethink)" <ben.dooks@xxxxxxxxxxxxxxx>
• [PATCH v3] pinctrl: intel: baytrail: Pass irqchip when adding gpiochip
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [RFC PATCH 10/13] gpio: bd71828: Initial support for ROHM BD71828 PMIC GPIOs
  • From: "Vaittinen, Matti" <Matti.Vaittinen@xxxxxxxxxxxxxxxxx>
• [GIT PULL] gpio: updates for v5.5 - part 1
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• [GIT PULL] gpio: fixes for v5.4-rc5
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• Re: [RFC PATCH 11/13] led: bd71828: Support LED outputs on ROHM BD71828 PMIC
  • From: "Vaittinen, Matti" <Matti.Vaittinen@xxxxxxxxxxxxxxxxx>
• Re: [GIT PULL] pin control fixes for v5.4
  • From: pr-tracker-bot@xxxxxxxxxx
• [PATCH v2 5/5] pinctrl: intel: Use helper to restore register values on ->resume()
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v2 3/5] pinctrl: intel: Introduce intel_restore_intmask() helper
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v2 4/5] pinctrl: intel: Drop level from warning to debug in intel_restore_hostown()
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v2 0/5] pinctrl: intel: Refactor register restoring on resume
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v2 1/5] pinctrl: intel: Introduce intel_restore_padcfg() helper
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v2 2/5] pinctrl: intel: Introduce intel_restore_hostown() helper
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v3 3/4] gpio: Add RDA Micro GPIO controller support
  • From: Bartosz Golaszewski <bgolaszewski@xxxxxxxxxxxx>
• [GIT PULL] pin control fixes for v5.4
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• [RESEND PATCH v3 0/8] drivers: add new variants of devm_platform_ioremap_resource()
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• [RESEND PATCH v3 1/8] Documentation: devres: add missing entry for devm_platform_ioremap_resource()
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• [RESEND PATCH v3 5/8] misc: sram: use devm_platform_ioremap_resource_wc()
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• [RESEND PATCH v3 3/8] lib: devres: provide devm_ioremap_resource_wc()
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• [RESEND PATCH v3 2/8] lib: devres: prepare devm_ioremap_resource() for more variants
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• [RESEND PATCH v3 4/8] drivers: platform: provide devm_platform_ioremap_resource_wc()
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• [RESEND PATCH v3 8/8] gpio: tegra186: use devm_platform_ioremap_resource_byname()
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• [RESEND PATCH v3 7/8] gpio: mvebu: use devm_platform_ioremap_resource_byname()
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• [RESEND PATCH v3 6/8] drivers: provide devm_platform_ioremap_resource_byname()
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• Re: [PATCH v2 5/6] gpiolib: disable bias on inputs when pull up/down are both set
  • From: Kent Gibson <warthog618@xxxxxxxxx>
• Re: [PATCH v2 5/6] gpiolib: disable bias on inputs when pull up/down are both set
  • From: Kent Gibson <warthog618@xxxxxxxxx>
• Re: [PATCH v3 0/8] drivers: add new variants of devm_platform_ioremap_resource()
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• Re: [RFC PATCH 11/13] led: bd71828: Support LED outputs on ROHM BD71828 PMIC
  • From: Jacek Anaszewski <jacek.anaszewski@xxxxxxxxx>
• Re: [PATCH] pinctrl: qcom: sc7180: Add missing tile info in SDC_QDSD_PINGROUP/UFS_RESET
  • From: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
• Re: [PATCH v1] pinctrl: intel: Add Intel Tiger Lake pin controller support
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v2] pinctrl: intel: Add Intel Tiger Lake pin controller support
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v3 0/8] drivers: add new variants of devm_platform_ioremap_resource()
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• Re: [PATCH v3 0/8] drivers: add new variants of devm_platform_ioremap_resource()
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• Re: [PATCH v3 0/8] drivers: add new variants of devm_platform_ioremap_resource()
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• Re: [PATCH v2 5/6] gpiolib: disable bias on inputs when pull up/down are both set
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• Re: [RFC PATCH 10/13] gpio: bd71828: Initial support for ROHM BD71828 PMIC GPIOs
  • From: "Vaittinen, Matti" <Matti.Vaittinen@xxxxxxxxxxxxxxxxx>
• Re: [RFC PATCH 10/13] gpio: bd71828: Initial support for ROHM BD71828 PMIC GPIOs
  • From: Bartosz Golaszewski <bgolaszewski@xxxxxxxxxxxx>
• What should be the value of ngpio field for multiplexed GPIO Pins
  • From: rishi gupta <gupt21@xxxxxxxxx>
• Re: [PATCH v1] pinctrl: intel: Add Intel Tiger Lake pin controller support
  • From: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>
• [PATCH] pinctrl: qcom: sc7180: Add missing tile info in SDC_QDSD_PINGROUP/UFS_RESET
  • From: Rajendra Nayak <rnayak@xxxxxxxxxxxxxx>
• Re: [PATCH] pinctrl: cherryview: Fix irq_valid_mask calculation
  • From: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>
• Re: [PATCH] gpiolib: acpi: Print pin number on acpi_gpiochip_alloc_event errors
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH] gpiolib: acpi: Print pin number on acpi_gpiochip_alloc_event errors
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v1 3/3] pinctrl: intel: Introduce intel_restore_intmask() helper
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v2 02/11] mfd: wcd934x: add support to wcd9340/wcd9341 codec
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• [PATCH v1] pinctrl: intel: Add Intel Tiger Lake pin controller support
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH] gpiolib: acpi: Print pin number on acpi_gpiochip_alloc_event errors
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• Re: [PATCH v1] pinctrl: intel: Avoid potential glitches if pin is in GPIO mode
  • From: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>
• Re: [PATCH v1 3/3] pinctrl: intel: Introduce intel_restore_intmask() helper
  • From: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>
• Re: [PATCH v1 2/3] pinctrl: intel: Introduce intel_restore_hostown() helper
  • From: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>
• Re: [PATCH v1 1/3] pinctrl: intel: Introduce intel_restore_padcfg() helper
  • From: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>
• Re: [PATCH v2 02/11] mfd: wcd934x: add support to wcd9340/wcd9341 codec
  • From: Srinivas Kandagatla <srinivas.kandagatla@xxxxxxxxxx>
• Re: [PATCH v2 02/11] mfd: wcd934x: add support to wcd9340/wcd9341 codec
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [PATCH v2 02/11] mfd: wcd934x: add support to wcd9340/wcd9341 codec
  • From: Srinivas Kandagatla <srinivas.kandagatla@xxxxxxxxxx>
• Re: [PATCH v2 02/11] mfd: wcd934x: add support to wcd9340/wcd9341 codec
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [PATCH v2 05/11] ASoC: wcd934x: add playback dapm widgets
  • From: Srinivas Kandagatla <srinivas.kandagatla@xxxxxxxxxx>
• Re: [PATCH] gpiolib: acpi: Print pin number on acpi_gpiochip_alloc_event errors
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [RFC PATCH 12/13] dt-bindings: mfd: Document ROHM BD71282 bindings
  • From: "Vaittinen, Matti" <Matti.Vaittinen@xxxxxxxxxxxxxxxxx>
• Re: [RFC PATCH 11/13] led: bd71828: Support LED outputs on ROHM BD71828 PMIC
  • From: "Vaittinen, Matti" <Matti.Vaittinen@xxxxxxxxxxxxxxxxx>
• Re: [RFC PATCH 10/13] gpio: bd71828: Initial support for ROHM BD71828 PMIC GPIOs
  • From: "Vaittinen, Matti" <Matti.Vaittinen@xxxxxxxxxxxxxxxxx>
• [PATCH v3 4/4] MAINTAINERS: Add entry for RDA Micro GPIO driver and binding
  • From: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
• [PATCH v3 3/4] gpio: Add RDA Micro GPIO controller support
  • From: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
• [PATCH v3 2/4] ARM: dts: Add RDA8810PL GPIO controllers
  • From: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
• [PATCH v3 1/4] dt-bindings: gpio: Add devicetree binding for RDA Micro GPIO controller
  • From: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
• [PATCH v3 0/4] Add GPIO support for RDA8810PL SoC
  • From: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
• Re: [PATCH v2 3/4] gpio: Add RDA Micro GPIO controller support
  • From: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
• Re: [PATCH v2 1/4] dt-bindings: gpio: Add devicetree binding for RDA Micro GPIO controller
  • From: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
• Re: [RFC PATCH 09/13] mfd: rtc: support RTC on ROHM BD71828 with BD70528 driver
  • From: "Vaittinen, Matti" <Matti.Vaittinen@xxxxxxxxxxxxxxxxx>
• Re: [PATCH v2 3/4] gpio: Add RDA Micro GPIO controller support
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH v2 05/11] ASoC: wcd934x: add playback dapm widgets
  • From: Cezary Rojewski <cezary.rojewski@xxxxxxxxx>
• [PATCH v3 5/5] gpiolib: add support for biasing output lines
  • From: Kent Gibson <warthog618@xxxxxxxxx>
• [PATCH v3 4/5] gpiolib: add support for disabling line bias
  • From: Kent Gibson <warthog618@xxxxxxxxx>
• [PATCH v3 3/5] gpio: mockup: add set_config to support pull up/down
  • From: Kent Gibson <warthog618@xxxxxxxxx>
• [PATCH v3 2/5] gpiolib: add support for pull up/down to lineevent_create
  • From: Kent Gibson <warthog618@xxxxxxxxx>
• [PATCH v3 1/5] gpio: expose pull-up/pull-down line flags to userspace
  • From: Kent Gibson <warthog618@xxxxxxxxx>
• [PATCH v3 0/5] gpio: expose line bias flags to userspace
  • From: Kent Gibson <warthog618@xxxxxxxxx>
• Re: [PATCH v2 3/4] gpio: Add RDA Micro GPIO controller support
  • From: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
• [PATCH AUTOSEL 5.3 40/89] gpio: max77620: Use correct unit for debounce times
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.19 072/100] gpio: max77620: Use correct unit for debounce times
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.14 34/56] gpio: max77620: Use correct unit for debounce times
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.9 14/29] gpio: max77620: Use correct unit for debounce times
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH] gpiolib: acpi: Print pin number on acpi_gpiochip_alloc_event errors
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• Re: [PATCH v2 1/2] dt-bindings: gpio: brcm: Add bindings for xgs-iproc
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH -next 11/30] pinctrl: msm: use devm_platform_ioremap_resource() to simplify code
  • From: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
• Re: [PATCH] gpio: of: don't warn if ignored GPIO flag matches the behavior
  • From: Bartosz Golaszewski <bgolaszewski@xxxxxxxxxxxx>
• [GIT PULL] pinctrl: sh-pfc: Updates for v5.5
  • From: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>
• Re: [PATCH v2 5/6] gpiolib: disable bias on inputs when pull up/down are both set
  • From: Kent Gibson <warthog618@xxxxxxxxx>
• [PATCH] gpio: of: don't warn if ignored GPIO flag matches the behavior
  • From: Lucas Stach <l.stach@xxxxxxxxxxxxxx>
• Re: [PATCH v2 5/6] gpiolib: disable bias on inputs when pull up/down are both set
  • From: Kent Gibson <warthog618@xxxxxxxxx>
• Re: [PATCH] pinctrl: cherryview: Fix irq_valid_mask calculation
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v1] gpio: pca953x: Convert to use bitmap API
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH] Record interrupt status when an IRQ is masked
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH] pinctrl: cherryview: Fix irq_valid_mask calculation
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• Re: [PATCH v2 5/6] gpiolib: disable bias on inputs when pull up/down are both set
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• Re: [PATCH v2 5/6] gpiolib: disable bias on inputs when pull up/down are both set
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• Re: [PATCH v2 1/2] dt-bindings: gpio: brcm: Add bindings for xgs-iproc
  • From: Bartosz Golaszewski <bgolaszewski@xxxxxxxxxxxx>
• [PATCH v2 03/11] ASoC: wcd934x: add support to wcd9340/wcd9341 codec
  • From: Srinivas Kandagatla <srinivas.kandagatla@xxxxxxxxxx>
• [PATCH v2 02/11] mfd: wcd934x: add support to wcd9340/wcd9341 codec
  • From: Srinivas Kandagatla <srinivas.kandagatla@xxxxxxxxxx>
• [PATCH v2 04/11] ASoC: wcd934x: add basic controls
  • From: Srinivas Kandagatla <srinivas.kandagatla@xxxxxxxxxx>
• [PATCH v2 07/11] ASoC: wcd934x: add audio routings
  • From: Srinivas Kandagatla <srinivas.kandagatla@xxxxxxxxxx>
• [PATCH v2 08/11] dt-bindings: pinctrl: qcom-wcd934x: Add bindings for gpio
  • From: Srinivas Kandagatla <srinivas.kandagatla@xxxxxxxxxx>
• [PATCH v2 11/11] ASoC: qcom: sdm845: add support to DB845c and Lenovo Yoga
  • From: Srinivas Kandagatla <srinivas.kandagatla@xxxxxxxxxx>
• [PATCH v2 09/11] pinctrl: qcom-wcd934x: Add support to wcd934x pinctrl driver.
  • From: Srinivas Kandagatla <srinivas.kandagatla@xxxxxxxxxx>
• [PATCH v2 10/11] ASoC: dt-bindings: Add compatible for DB845c and Lenovo Yoga
  • From: Srinivas Kandagatla <srinivas.kandagatla@xxxxxxxxxx>
• [PATCH v2 05/11] ASoC: wcd934x: add playback dapm widgets
  • From: Srinivas Kandagatla <srinivas.kandagatla@xxxxxxxxxx>
• [PATCH v2 06/11] ASoC: wcd934x: add capture dapm widgets
  • From: Srinivas Kandagatla <srinivas.kandagatla@xxxxxxxxxx>
• [PATCH v2 01/11] ASoC: dt-bindings: add dt bindings for WCD9340/WCD9341 audio codec
  • From: Srinivas Kandagatla <srinivas.kandagatla@xxxxxxxxxx>
• [PATCH v2 00/11] ASoC: Add support to WCD9340/WCD9341 codec
  • From: Srinivas Kandagatla <srinivas.kandagatla@xxxxxxxxxx>
• Re: [PATCH v2 1/2] dt-bindings: gpio: brcm: Add bindings for xgs-iproc
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [GIT PULL] GPIO fixes for v5.4 take two
  • From: pr-tracker-bot@xxxxxxxxxx
• Re: [PATCH v2 1/2] dt-bindings: gpio: brcm: Add bindings for xgs-iproc
  • From: Bartosz Golaszewski <bgolaszewski@xxxxxxxxxxxx>
• Re: [PATCH v2 2/2] gpio: Add xgs-iproc driver
  • From: Bartosz Golaszewski <bgolaszewski@xxxxxxxxxxxx>
• Re: [RFC PATCH 11/13] led: bd71828: Support LED outputs on ROHM BD71828 PMIC
  • From: Alexandre Belloni <alexandre.belloni@xxxxxxxxxxx>
• Re: [RFC PATCH 12/13] dt-bindings: mfd: Document ROHM BD71282 bindings
  • From: Dan Murphy <dmurphy@xxxxxx>
• Re: [RFC PATCH 11/13] led: bd71828: Support LED outputs on ROHM BD71828 PMIC
  • From: Dan Murphy <dmurphy@xxxxxx>
• Re: pinctrl regresssion on mx28
  • From: Fabio Estevam <festevam@xxxxxxxxx>
• pinctrl regresssion on mx28
  • From: Fabio Estevam <festevam@xxxxxxxxx>
• Re: drivers/pinctrl/sh-pfc/pfc-sh7734.c multiple define of TCLK1_B
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: [PATCH -next 00/30] pinctrl: use devm_platform_ioremap_resource() to simplify code
  • From: Alexandre Belloni <alexandre.belloni@xxxxxxxxxxx>
• Re: [PATCH -next 26/30] pinctrl: bm1880: use devm_platform_ioremap_resource() to simplify code
  • From: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
• Re: [PATCH -next 28/30] pinctrl: actions: use devm_platform_ioremap_resource() to simplify code
  • From: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
• Re: [PATCH -next 10/30] pinctrl: tegra: use devm_platform_ioremap_resource() to simplify code
  • From: Thierry Reding <thierry.reding@xxxxxxxxx>
• Re: [PATCH -next 27/30] pinctrl: artpec6: use devm_platform_ioremap_resource() to simplify code
  • From: Jesper Nilsson <jesper.nilsson@xxxxxxxx>
• [PATCH -next 03/30] pinctrl: cygnus-mux: use devm_platform_ioremap_resource() to simplify code
  • From: YueHaibing <yuehaibing@xxxxxxxxxx>
• [PATCH -next 07/30] pinctrl: ns2: use devm_platform_ioremap_resource() to simplify code
  • From: YueHaibing <yuehaibing@xxxxxxxxxx>
• [PATCH -next 05/30] pinctrl: nsp-gpio: use devm_platform_ioremap_resource() to simplify code
  • From: YueHaibing <yuehaibing@xxxxxxxxxx>
• [PATCH -next 02/30] pinctrl: pxa27x: use devm_platform_ioremap_resource() to simplify code
  • From: YueHaibing <yuehaibing@xxxxxxxxxx>
• [PATCH -next 06/30] pinctrl: nsp: use devm_platform_ioremap_resource() to simplify code
  • From: YueHaibing <yuehaibing@xxxxxxxxxx>
• [PATCH -next 08/30] pinctrl: bcm281xx: use devm_platform_ioremap_resource() to simplify code
  • From: YueHaibing <yuehaibing@xxxxxxxxxx>
• [PATCH -next 10/30] pinctrl: tegra: use devm_platform_ioremap_resource() to simplify code
  • From: YueHaibing <yuehaibing@xxxxxxxxxx>
• Re: [PATCH -next 15/30] pinctrl: oxnas: use devm_platform_ioremap_resource() to simplify code
  • From: Neil Armstrong <narmstrong@xxxxxxxxxxxx>
• [PATCH -next 11/30] pinctrl: msm: use devm_platform_ioremap_resource() to simplify code
  • From: YueHaibing <yuehaibing@xxxxxxxxxx>
• [PATCH -next 14/30] pinctrl: at91: use devm_platform_ioremap_resource() to simplify code
  • From: YueHaibing <yuehaibing@xxxxxxxxxx>
• [PATCH -next 17/30] pinctrl: lpc18xx: use devm_platform_ioremap_resource() to simplify code
  • From: YueHaibing <yuehaibing@xxxxxxxxxx>
• [PATCH -next 16/30] pinctrl: pistachio: use devm_platform_ioremap_resource() to simplify code
  • From: YueHaibing <yuehaibing@xxxxxxxxxx>
• [PATCH -next 20/30] pinctrl: u300: use devm_platform_ioremap_resource() to simplify code
  • From: YueHaibing <yuehaibing@xxxxxxxxxx>
• [PATCH -next 13/30] pinctrl: zte: use devm_platform_ioremap_resource() to simplify code
  • From: YueHaibing <yuehaibing@xxxxxxxxxx>
• [PATCH -next 19/30] pinctrl: tb10x: use devm_platform_ioremap_resource() to simplify code
  • From: YueHaibing <yuehaibing@xxxxxxxxxx>
• [PATCH -next 27/30] pinctrl: artpec6: use devm_platform_ioremap_resource() to simplify code
  • From: YueHaibing <yuehaibing@xxxxxxxxxx>
• [PATCH -next 23/30] pinctrl: rza2: use devm_platform_ioremap_resource() to simplify code
  • From: YueHaibing <yuehaibing@xxxxxxxxxx>
• [PATCH -next 26/30] pinctrl: bm1880: use devm_platform_ioremap_resource() to simplify code
  • From: YueHaibing <yuehaibing@xxxxxxxxxx>
• [PATCH -next 25/30] pinctrl: coh901: use devm_platform_ioremap_resource() to simplify code
  • From: YueHaibing <yuehaibing@xxxxxxxxxx>
• [PATCH -next 22/30] pinctrl: xway: use devm_platform_ioremap_resource() to simplify code
  • From: YueHaibing <yuehaibing@xxxxxxxxxx>
• [PATCH -next 30/30] pinctrl: iproc: use devm_platform_ioremap_resource() to simplify code
  • From: YueHaibing <yuehaibing@xxxxxxxxxx>
• [PATCH -next 28/30] pinctrl: actions: use devm_platform_ioremap_resource() to simplify code
  • From: YueHaibing <yuehaibing@xxxxxxxxxx>
• [PATCH -next 21/30] pinctrl: vt8500: use devm_platform_ioremap_resource() to simplify code
  • From: YueHaibing <yuehaibing@xxxxxxxxxx>
• [PATCH -next 29/30] pinctrl: at91-pio4: use devm_platform_ioremap_resource() to simplify code
  • From: YueHaibing <yuehaibing@xxxxxxxxxx>
• [PATCH -next 24/30] pinctrl: digicolor: use devm_platform_ioremap_resource() to simplify code
  • From: YueHaibing <yuehaibing@xxxxxxxxxx>
• [PATCH -next 18/30] pinctrl: da850-pupd: use devm_platform_ioremap_resource() to simplify code
  • From: YueHaibing <yuehaibing@xxxxxxxxxx>
• [PATCH -next 15/30] pinctrl: oxnas: use devm_platform_ioremap_resource() to simplify code
  • From: YueHaibing <yuehaibing@xxxxxxxxxx>
• [PATCH -next 12/30] pinctrl: spear: use devm_platform_ioremap_resource() to simplify code
  • From: YueHaibing <yuehaibing@xxxxxxxxxx>
• [PATCH -next 09/30] pinctrl: sunxi: use devm_platform_ioremap_resource() to simplify code
  • From: YueHaibing <yuehaibing@xxxxxxxxxx>
• [PATCH -next 00/30] pinctrl: use devm_platform_ioremap_resource() to simplify code
  • From: YueHaibing <yuehaibing@xxxxxxxxxx>
• [PATCH -next 04/30] pinctrl: pic32: use devm_platform_ioremap_resource() to simplify code
  • From: YueHaibing <yuehaibing@xxxxxxxxxx>
• [PATCH -next 01/30] pinctrl: pxa25x: use devm_platform_ioremap_resource() to simplify code
  • From: YueHaibing <yuehaibing@xxxxxxxxxx>
• Re: [RFC PATCH 10/13] gpio: bd71828: Initial support for ROHM BD71828 PMIC GPIOs
  • From: Bartosz Golaszewski <bgolaszewski@xxxxxxxxxxxx>
• drivers/pinctrl/sh-pfc/pfc-sh7734.c multiple define of TCLK1_B
  • From: Ben Dooks <ben.dooks@xxxxxxxxxxxxxxx>
• Re: [RFC PATCH 09/13] mfd: rtc: support RTC on ROHM BD71828 with BD70528 driver
  • From: "Vaittinen, Matti" <Matti.Vaittinen@xxxxxxxxxxxxxxxxx>
• Re: [RFC PATCH 09/13] mfd: rtc: support RTC on ROHM BD71828 with BD70528 driver
  • From: Alexandre Belloni <alexandre.belloni@xxxxxxxxxxx>
• Re: [RFC PATCH 09/13] mfd: rtc: support RTC on ROHM BD71828 with BD70528 driver
  • From: Alexandre Belloni <alexandre.belloni@xxxxxxxxxxx>
• [RFC PATCH 13/13] dt-bindings: regulator: Document ROHM BD71282 regulator bindings
  • From: Matti Vaittinen <matti.vaittinen@xxxxxxxxxxxxxxxxx>
• [RFC PATCH 12/13] dt-bindings: mfd: Document ROHM BD71282 bindings
  • From: Matti Vaittinen <matti.vaittinen@xxxxxxxxxxxxxxxxx>
• [RFC PATCH 11/13] led: bd71828: Support LED outputs on ROHM BD71828 PMIC
  • From: Matti Vaittinen <matti.vaittinen@xxxxxxxxxxxxxxxxx>
• [RFC PATCH 10/13] gpio: bd71828: Initial support for ROHM BD71828 PMIC GPIOs
  • From: Matti Vaittinen <matti.vaittinen@xxxxxxxxxxxxxxxxx>
• [RFC PATCH 09/13] mfd: rtc: support RTC on ROHM BD71828 with BD70528 driver
  • From: Matti Vaittinen <matti.vaittinen@xxxxxxxxxxxxxxxxx>
• [RFC PATCH 08/13] regulator: bd71828: Support in-kernel APIs to change run-level
  • From: Matti Vaittinen <matti.vaittinen@xxxxxxxxxxxxxxxxx>
• [RFC PATCH 07/13] regulator: bd71828: enhanced run-level support
  • From: Matti Vaittinen <matti.vaittinen@xxxxxxxxxxxxxxxxx>
• [RFC PATCH 06/13] regulator: bd71828: Add GPIO based run-level control for regulators
  • From: Matti Vaittinen <matti.vaittinen@xxxxxxxxxxxxxxxxx>
• [RFC PATCH 05/13] regulator: bd71828: Basic support for ROHM bd71828 PMIC regulators
  • From: Matti Vaittinen <matti.vaittinen@xxxxxxxxxxxxxxxxx>
• [RFC PATCH 04/13] regulator: bd718x7: Split driver to common and bd718x7 specific parts
  • From: Matti Vaittinen <matti.vaittinen@xxxxxxxxxxxxxxxxx>
• [RFC PATCH 03/13] clk: bd718x7: Support ROHM BD71828 clk block
  • From: Matti Vaittinen <matti.vaittinen@xxxxxxxxxxxxxxxxx>
• [RFC PATCH 02/13] mfd: input: bd71828: Add power-key support
  • From: Matti Vaittinen <matti.vaittinen@xxxxxxxxxxxxxxxxx>
• [RFC PATCH 01/13] mfd: bd71828: Support ROHM BD71828 PMIC - core
  • From: Matti Vaittinen <matti.vaittinen@xxxxxxxxxxxxxxxxx>
• [RFC PATCH 00/13] Support ROHM BD71828 PMIC
  • From: Matti Vaittinen <matti.vaittinen@xxxxxxxxxxxxxxxxx>
• linusw/devel boot: 41 boots: 0 failed, 41 passed (v5.4-rc1-12-g698b8eeaed72)
  • From: "kernelci.org bot" <bot@xxxxxxxxxxxx>
• linusw/for-next boot: 41 boots: 0 failed, 41 passed (gpio-v5.4-3-13-g7c547cb52849)
  • From: "kernelci.org bot" <bot@xxxxxxxxxxxx>
• linusw/devel build: 6 builds: 0 failed, 6 passed, 13 warnings (v5.4-rc1-12-g698b8eeaed72)
  • From: "kernelci.org bot" <bot@xxxxxxxxxxxx>
• linusw/for-next build: 6 builds: 0 failed, 6 passed, 5 warnings (gpio-v5.4-3-13-g7c547cb52849)
  • From: "kernelci.org bot" <bot@xxxxxxxxxxxx>
• [GIT PULL] GPIO fixes for v5.4 take two
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH v2 5/6] gpiolib: disable bias on inputs when pull up/down are both set
  • From: Kent Gibson <warthog618@xxxxxxxxx>
• [PATCH v2 0/2] gpio: brcm: XGS iProc GPIO driver
  • From: Chris Packham <chris.packham@xxxxxxxxxxxxxxxxxxx>
• [PATCH v2 2/2] gpio: Add xgs-iproc driver
  • From: Chris Packham <chris.packham@xxxxxxxxxxxxxxxxxxx>
• [PATCH v2 1/2] dt-bindings: gpio: brcm: Add bindings for xgs-iproc
  • From: Chris Packham <chris.packham@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 0/7] pinctrl: Fixes for AST2600 support
  • From: "Andrew Jeffery" <andrew@xxxxxxxx>
• Re: [PATCH v1] gpio: pca953x: Convert to use bitmap API
  • From: William Breathitt Gray <vilhelm.gray@xxxxxxxxx>
• Re: [PATCH] dt-bindings: pinctrl: Convert Allwinner Pin Controller to a schema
  • From: Rob Herring <robh+dt@xxxxxxxxxx>
• [PATCH v2] pinctrl: sh-pfc: Do not use platform_get_irq() to count interrupts
  • From: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>
• [PATCH] dt-bindings: pinctrl: Convert Allwinner Pin Controller to a schema
  • From: Maxime Ripard <mripard@xxxxxxxxxx>
• [PATCH -next] pinctrl: mvebu: use devm_platform_ioremap_resource() to simplify code
  • From: YueHaibing <yuehaibing@xxxxxxxxxx>
• [PATCH -next] pinctrl: mediatek: use devm_platform_ioremap_resource() to simplify code
  • From: YueHaibing <yuehaibing@xxxxxxxxxx>
• Re: [PATCH] pinctrl: sprd: Add CM4 sleep mode support
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH 0/7] pinctrl: Fixes for AST2600 support
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH 2/2] dt-bindings: pinctrl: Add MSM8976 driver bindings and documentation
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH v5.3] gpio: fix getting nonexclusive gpiods from DT
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH v1] pinctrl: intel: Avoid potential glitches if pin is in GPIO mode
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH 2/2] gpio: Add xgs-iproc driver
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH v3 2/2] pinctrl: rockchip: add rk3308 SoC support
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH v3 1/2] dt-bindings: pinctrl: rockchip: add rk3308 SoC support
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH v2 3/4] gpio: Add RDA Micro GPIO controller support
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH v2 1/4] dt-bindings: gpio: Add devicetree binding for RDA Micro GPIO controller
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• [PATCH] pinctrl: sprd: Add CM4 sleep mode support
  • From: Baolin Wang <baolin.wang@xxxxxxxxxx>
• Re: [PATCH] pinctrl: berlin: as370: fix a typo s/spififib/spdifib
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH v8] gpio/mpc8xxx: change irq handler from chained to normal
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH v1 1/2] pinctrl: Add pinmux & GPIO controller driver for new SoC
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH 0/5] gpio: expose pull-up/pull-down line flags to userspace
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH 3/3] gpio: da9062: add driver support
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH 0/7] pinctrl: Fixes for AST2600 support
  • From: "Andrew Jeffery" <andrew@xxxxxxxx>
• Re: [PATCH v2 1/1] pinctrl: stmfx: add irq_request/release_resources callbacks
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH] pinctrl: sprd: Add PIN_CONFIG_BIAS_DISABLE configuration support
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH 0/7] pinctrl: Fixes for AST2600 support
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH 1/1] pinctrl: stmfx: add irq_request/release_resources callbacks
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH V1] dt-bindings: pinctrl: qcom-pmic-gpio: Add support for pm6150/pm6150l
  • From: kgunda@xxxxxxxxxxxxxx
• Re: [PATCH 1/2] pinctrl: qcom: Add a pinctrl driver for MSM8976 and 8956
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH V1] dt-bindings: pinctrl: qcom-pmic-gpio: Add support for pm6150/pm6150l
  • From: Vinod Koul <vkoul@xxxxxxxxxx>
• Re: [PATCH RFC v2 06/14] dt-bindings/interrupt-controller: pdc: add SPI config register
  • From: Stephen Boyd <swboyd@xxxxxxxxxxxx>
• Re: [PATCH v2 5/6] gpiolib: disable bias on inputs when pull up/down are both set
  • From: Kent Gibson <warthog618@xxxxxxxxx>
• Re: [PATCH 1/7] dt-bindings: pinctrl: aspeed-g6: Rework SD3 function and groups
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH 2/2] dt-bindings: pinctrl: Add MSM8976 driver bindings and documentation
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH 1/2] dt-bindings: gpio: brcm: Add bindings for xgs-iproc
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v2 3/4] gpio: Add RDA Micro GPIO controller support
  • From: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
• [PATCH v2 4/4] MAINTAINERS: Add entry for RDA Micro GPIO driver and binding
  • From: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
• [PATCH v2 3/4] gpio: Add RDA Micro GPIO controller support
  • From: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
• [PATCH v2 2/4] ARM: dts: Add RDA8810PL GPIO controllers
  • From: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
• [PATCH v2 1/4] dt-bindings: gpio: Add devicetree binding for RDA Micro GPIO controller
  • From: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
• [PATCH v2 0/4] Add GPIO support for RDA8810PL SoC
  • From: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
• Re: [PATCH 3/3] dt-bindings: usb: generic-ehci: Add "companion" entry
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH 2/3] dt-bindings: pinctrl: stm32: Fix 'st,syscfg' description field
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH 1/3] dt-bindings: arm: stm32: Add missing STM32 boards
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH 2/4] gpio: Add RDA Micro GPIO controller support
  • From: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
• Re: [PATCH] gpio: pca953x: Add Maxim MAX7313 PWM support
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH] gpio: pca953x: Add Maxim MAX7313 PWM support
  • From: Miquel Raynal <miquel.raynal@xxxxxxxxxxx>
• Re: [PATCH v2 5/6] gpiolib: disable bias on inputs when pull up/down are both set
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• Re: [PATCH 2/2] dt-bindings: pinctrl: Add MSM8976 driver bindings and documentation
  • From: AngeloGioacchino Del Regno <kholk11@xxxxxxxxx>
• [PATCH v3 2/2] pinctrl: rockchip: add rk3308 SoC support
  • From: Jianqun Xu <jay.xu@xxxxxxxxxxxxxx>
• [PATCH v3 1/2] dt-bindings: pinctrl: rockchip: add rk3308 SoC support
  • From: Jianqun Xu <jay.xu@xxxxxxxxxxxxxx>
• [PATCH v3 0/2] pinctrl: rockchip: support rk3308 SoC
  • From: Jianqun Xu <jay.xu@xxxxxxxxxxxxxx>
• [PATCH v3 2/2] pinctrl: rockchip: add rk3308 SoC support
  • From: Jianqun Xu <jay.xu@xxxxxxxxxxxxxx>
• [PATCH v3 0/2] pinctrl: rockchip: support rk3308 SoC
  • From: Jianqun Xu <jay.xu@xxxxxxxxxxxxxx>
• [PATCH v3 1/2] dt-bindings: pinctrl: rockchip: add rk3308 SoC support
  • From: Jianqun Xu <jay.xu@xxxxxxxxxxxxxx>
• linusw/for-next boot: 42 boots: 0 failed, 42 passed (v5.4-rc3-18-g818633792f6c)
  • From: "kernelci.org bot" <bot@xxxxxxxxxxxx>
• linusw/fixes boot: 33 boots: 1 failed, 32 passed (v5.4-rc3-6-g75e99bf5ed8f)
  • From: "kernelci.org bot" <bot@xxxxxxxxxxxx>
• linusw/for-next build: 6 builds: 0 failed, 6 passed, 5 warnings (v5.4-rc3-18-g818633792f6c)
  • From: "kernelci.org bot" <bot@xxxxxxxxxxxx>
• linusw/fixes build: 6 builds: 0 failed, 6 passed, 5 warnings (v5.4-rc3-6-g75e99bf5ed8f)
  • From: "kernelci.org bot" <bot@xxxxxxxxxxxx>
• Re: [PATCH v2 5/6] gpiolib: disable bias on inputs when pull up/down are both set
  • From: Kent Gibson <warthog618@xxxxxxxxx>
• Re: [PATCH v2 4/6] gpiolib: pull requires explicit input mode
  • From: Kent Gibson <warthog618@xxxxxxxxx>
• Re: [PATCH v5.3, v4.19] gpiolib: don't clear FLAG_IS_OUT when emulating open-drain/open-source
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• Re: [PATCH v5.3] gpio: fix getting nonexclusive gpiods from DT
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• Re: [PATCH v2 1/2] dt-bindings: pinctrl: rockchip: add rk3308 SoC support
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH] gpio: pca953x: Add Maxim MAX7313 PWM support
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v2 4/6] gpiolib: pull requires explicit input mode
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• Re: [PATCH v2 5/6] gpiolib: disable bias on inputs when pull up/down are both set
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• Re: [PATCH v2 2/6] gpiolib: add support for pull up/down to lineevent_create
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• [PATCH v1] gpio: pca953x: Convert to use bitmap API
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v4.14] gpiolib: don't clear FLAG_IS_OUT when emulating open-drain/open-source
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• Re: [PATCH] gpio: pca953x: Add Maxim MAX7313 PWM support
  • From: kbuild test robot <lkp@xxxxxxxxx>
• [PATCH v5.3, v4.19] gpiolib: don't clear FLAG_IS_OUT when emulating open-drain/open-source
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• [PATCH v5.3] gpio: fix getting nonexclusive gpiods from DT
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• Re: [PATCH] pinctrl: ocelot: Pass irqchip when adding gpiochip
  • From: Alexandre Belloni <alexandre.belloni@xxxxxxxxxxx>
• Re: [PATCH 2/4] gpio: Add RDA Micro GPIO controller support
  • From: Bartosz Golaszewski <bgolaszewski@xxxxxxxxxxxx>
• Re: [PATCH] gpio: pca953x: Add Maxim MAX7313 PWM support
  • From: Thierry Reding <thierry.reding@xxxxxxxxx>
• Re: [PATCH v2 5/6] gpiolib: disable bias on inputs when pull up/down are both set
  • From: Kent Gibson <warthog618@xxxxxxxxx>
• Re: [PATCH v2 2/6] gpiolib: add support for pull up/down to lineevent_create
  • From: Kent Gibson <warthog618@xxxxxxxxx>
• Re: [PATCH v2 4/6] gpiolib: pull requires explicit input mode
  • From: Kent Gibson <warthog618@xxxxxxxxx>
• [PATCH] gpio: pca953x: Add Maxim MAX7313 PWM support
  • From: Miquel Raynal <miquel.raynal@xxxxxxxxxxx>
• Re: [PATCH v2 5/6] gpiolib: disable bias on inputs when pull up/down are both set
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• Re: [PATCH v2 4/6] gpiolib: pull requires explicit input mode
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• Re: [PATCH v2 2/6] gpiolib: add support for pull up/down to lineevent_create
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• [PATCH 3/3] pinctrl: nomadik: Simplify interrupt handler
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• [PATCH 2/3] pinctrl: nomadik: Pass irqchip when adding gpiochip
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• [PATCH 1/3] pinctrl: nomadik: Drop support for latent IRQ
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• [PATCH v3 4/4] arm64: dts: meson: a1: add pinctrl controller support
  • From: Qianggui Song <qianggui.song@xxxxxxxxxxx>
• [PATCH v3 3/4] pinctrl: meson: add pinctrl driver support for Meson-A1 Soc
  • From: Qianggui Song <qianggui.song@xxxxxxxxxxx>
• [PATCH v3 2/4] pinctrl: meson: add a new dt parse callback for Meson-A series SoCs
  • From: Qianggui Song <qianggui.song@xxxxxxxxxxx>
• [PATCH v3 1/4] pinctrl: add compatible for Amlogic Meson A1 pin controller
  • From: Qianggui Song <qianggui.song@xxxxxxxxxxx>
• [PATCH v3 0/4] pinctrl: meson-a1: add pinctrl driver
  • From: Qianggui Song <qianggui.song@xxxxxxxxxxx>
• [PATCH v1] pinctrl: intel: Avoid potential glitches if pin is in GPIO mode
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v1 2/3] pinctrl: intel: Introduce intel_restore_hostown() helper
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v1 3/3] pinctrl: intel: Introduce intel_restore_intmask() helper
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v1 1/3] pinctrl: intel: Introduce intel_restore_padcfg() helper
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v2 2/2] pinctrl: rockchip: add rk3308 SoC support
  • From: Jianqun Xu <jay.xu@xxxxxxxxxxxxxx>
• [PATCH v2 1/2] dt-bindings: pinctrl: rockchip: add rk3308 SoC support
  • From: Jianqun Xu <jay.xu@xxxxxxxxxxxxxx>
• [PATCH v2 0/2] pinctrl: rockchip: support rk3308 SoC
  • From: Jianqun Xu <jay.xu@xxxxxxxxxxxxxx>
• [PATCH v2 2/2] pinctrl: rockchip: add rk3308 SoC support
  • From: Jianqun Xu <jay.xu@xxxxxxxxxxxxxx>
• [PATCH v2 0/2] pinctrl: rockchip: support rk3308 SoC
  • From: Jianqun Xu <jay.xu@xxxxxxxxxxxxxx>
• [PATCH v2 1/2] dt-bindings: pinctrl: rockchip: add rk3308 SoC support
  • From: Jianqun Xu <jay.xu@xxxxxxxxxxxxxx>
• Re: [PATCH 2/2] gpio: Add xgs-iproc driver
  • From: Chris Packham <Chris.Packham@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2 2/2] pinctrl: iproc: use unique name for irq chip
  • From: Chris Packham <Chris.Packham@xxxxxxxxxxxxxxxxxxx>
• [PATCH 4/4] MAINTAINERS: Add entry for RDA Micro GPIO driver and binding
  • From: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
• [PATCH 3/4] ARM: dts: Add RDA8810PL GPIO controllers
  • From: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
• [PATCH 2/4] gpio: Add RDA Micro GPIO controller support
  • From: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
• [PATCH 1/4] dt-bindings: gpio: Add devicetree binding for RDA Micro GPIO controller
  • From: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
• [PATCH 0/4] Add GPIO support for RDA8810PL SoC
  • From: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
• pinctrl: lantiq: Checking two kmemdup() calls in ltq_pinctrl_dt_subnode_to_map()
  • From: Markus Elfring <Markus.Elfring@xxxxxx>
• Re: [PATCH 0/2] pinctrl: rockchip: support rk3308 SoC
  • From: Heiko Stübner <heiko@xxxxxxxxx>
• [PATCH 2/2] pinctrl: rockchip: add rk3308 SoC support
  • From: Jianqun Xu <jay.xu@xxxxxxxxxxxxxx>
• [PATCH 1/2] dt-bindings: pinctrl: rockchip: add rk3308 SoC support
  • From: Jianqun Xu <jay.xu@xxxxxxxxxxxxxx>
• [PATCH 0/2] pinctrl: rockchip: support rk3308 SoC
  • From: Jianqun Xu <jay.xu@xxxxxxxxxxxxxx>
• Re: [PATCH 0/5] gpio: expose pull-up/pull-down line flags to userspace
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• [PATCH v2 6/6] gpiolib: allow pull up/down on outputs
  • From: Kent Gibson <warthog618@xxxxxxxxx>
• [PATCH v2 5/6] gpiolib: disable bias on inputs when pull up/down are both set
  • From: Kent Gibson <warthog618@xxxxxxxxx>
• [PATCH v2 4/6] gpiolib: pull requires explicit input mode
  • From: Kent Gibson <warthog618@xxxxxxxxx>
• [PATCH v2 3/6] gpio: mockup: add set_config to support pull up/down
  • From: Kent Gibson <warthog618@xxxxxxxxx>
• [PATCH v2 2/6] gpiolib: add support for pull up/down to lineevent_create
  • From: Kent Gibson <warthog618@xxxxxxxxx>
• [PATCH v2 1/6] gpio: expose pull-up/pull-down line flags to userspace
  • From: Kent Gibson <warthog618@xxxxxxxxx>
• [PATCH v2 0/6] gpio: expose pull-up/pull-down line flags to userspace
  • From: Kent Gibson <warthog618@xxxxxxxxx>
• Re: [PATCH 0/5] gpio: expose pull-up/pull-down line flags to userspace
  • From: Kent Gibson <warthog618@xxxxxxxxx>
• Re: [PATCH 0/5] gpio: expose pull-up/pull-down line flags to userspace
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• Re: [PATCH 5/5] gpio: merrifield: Move hardware initialization to callback
  • From: Ferry Toth <fntoth@xxxxxxxxx>
• Re: [PATCH 1/5] gpio: merrifield: Restore use of irq_base
  • From: Ferry Toth <fntoth@xxxxxxxxx>
• [PATCH 5/5] gpiolib: allow pull up/down on outputs
  • From: Kent Gibson <warthog618@xxxxxxxxx>
• [PATCH 2/5] gpio: mockup: add set_config to support pull up/down
  • From: Kent Gibson <warthog618@xxxxxxxxx>
• [PATCH 4/5] gpiolib: disable bias on inputs when pull up/down are both set
  • From: Kent Gibson <warthog618@xxxxxxxxx>
• [PATCH 3/5] gpiolib: pull requires explicit input mode
  • From: Kent Gibson <warthog618@xxxxxxxxx>
• [PATCH 1/5] gpiolib: add support for pull up/down to lineevent_create
  • From: Kent Gibson <warthog618@xxxxxxxxx>
• [PATCH 0/5] gpio: expose pull-up/pull-down line flags to userspace
  • From: Kent Gibson <warthog618@xxxxxxxxx>
• Re: [RFC] gpio: expose pull-up/pull-down line flags to userspace
  • From: Kent Gibson <warthog618@xxxxxxxxx>
• Re: [RFC] gpio: expose pull-up/pull-down line flags to userspace
  • From: Drew Fustini <pdp7pdp7@xxxxxxxxx>
• Re: [RFC] gpio: expose pull-up/pull-down line flags to userspace
  • From: Drew Fustini <pdp7pdp7@xxxxxxxxx>
• Re: [PATCH] pinctrl: rzn1: array reg_drive static, makes object smaller
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: [GIT PULL] intel-gpio for 5.4-2
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH] pinctrl: berlin: as370: fix a typo s/spififib/spdifib
  • From: Jisheng Zhang <Jisheng.Zhang@xxxxxxxxxxxxx>
• Re: [PATCH 2/2] gpio: Add xgs-iproc driver
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH v2 2/2] pinctrl: iproc: use unique name for irq chip
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: GPIO controller driver pull up/down without pinctrl
  • From: Jay Aurabind <jay.aurabind@xxxxxxxxx>
• Re: GPIO controller driver pull up/down without pinctrl
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• GPIO controller driver pull up/down without pinctrl
  • From: Jay Aurabind <jay.aurabind@xxxxxxxxx>
• Re: [PATCH V4 2/2] gpio: inverter: document the inverter bindings
  • From: Harish Jenny K N <harish_kandiga@xxxxxxxxxx>
• linusw/for-next boot: 46 boots: 0 failed, 46 passed (gpio-v5.4-2-19-g4002d58d2f8d)
  • From: "kernelci.org bot" <bot@xxxxxxxxxxxx>
• linusw/devel boot: 41 boots: 0 failed, 41 passed (v5.4-rc1-11-g95873fba06ae)
  • From: "kernelci.org bot" <bot@xxxxxxxxxxxx>
• linusw/for-next build: 6 builds: 0 failed, 6 passed, 13 warnings (gpio-v5.4-2-19-g4002d58d2f8d)
  • From: "kernelci.org bot" <bot@xxxxxxxxxxxx>
• linusw/fixes boot: 50 boots: 0 failed, 50 passed (gpio-v5.4-2-7-gb70471b8a438)
  • From: "kernelci.org bot" <bot@xxxxxxxxxxxx>
• linusw/devel build: 6 builds: 0 failed, 6 passed, 13 warnings (v5.4-rc1-11-g95873fba06ae)
  • From: "kernelci.org bot" <bot@xxxxxxxxxxxx>
• linusw/fixes build: 6 builds: 0 failed, 6 passed, 13 warnings (gpio-v5.4-2-7-gb70471b8a438)
  • From: "kernelci.org bot" <bot@xxxxxxxxxxxx>
• [PATCH v8] gpio/mpc8xxx: change irq handler from chained to normal
  • From: Hui Song <hui.song_1@xxxxxxx>
• Re: [PATCH v7] gpio/mpc8xxx: change irq handler from chained to normal
  • From: Bartosz Golaszewski <bgolaszewski@xxxxxxxxxxxx>
• Re: [GIT PULL] intel-pinctrl fixes for v5.4
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [GIT PULL] intel-gpio for 5.4-2
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH 2/5] gpiolib: Initialize the hardware with a callback
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH 1/3] docs: fix some broken references
  • From: Jonathan Corbet <corbet@xxxxxxx>
• Re: [PATCH] gpio: merrifield: Remove set but not used variable 'irq_base'
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH] gpio: merrifield: Remove set but not used variable 'irq_base'
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH] gpio: merrifield: Remove set but not used variable 'irq_base'
  • From: zhengbin <zhengbin13@xxxxxxxxxx>
• Re: [PATCH v2] pinctrl: intel: baytrail: Pass irqchip when adding gpiochip
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v18 01/14] bitops: Introduce the for_each_set_clump8 macro
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v18 14/14] gpio: pca953x: Utilize the for_each_set_clump8 macro
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v18 10/14] gpio: 74x164: Utilize the for_each_set_clump8 macro
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v17 01/14] bitops: Introduce the for_each_set_clump8 macro
  • From: William Breathitt Gray <vilhelm.gray@xxxxxxxxx>
• Re: [PATCH v2 2/3] pinctrl: meson-a1: add pinctrl driver for Meson A1 Soc
  • From: Qianggui Song <qianggui.song@xxxxxxxxxxx>
• Re: [RFC] gpio: expose pull-up/pull-down line flags to userspace
  • From: Kent Gibson <warthog618@xxxxxxxxx>
• Re: [RFC] gpio: expose pull-up/pull-down line flags to userspace
  • From: Kent Gibson <warthog618@xxxxxxxxx>
• Re: [PATCH v17 01/14] bitops: Introduce the for_each_set_clump8 macro
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: [PATCH v17 01/14] bitops: Introduce the for_each_set_clump8 macro
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v17 01/14] bitops: Introduce the for_each_set_clump8 macro
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: [RFC] gpio: expose pull-up/pull-down line flags to userspace
  • From: Drew Fustini <pdp7pdp7@xxxxxxxxx>
• Re: [PATCH v17 01/14] bitops: Introduce the for_each_set_clump8 macro
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH 2/5] gpiolib: Initialize the hardware with a callback
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• Re: [PATCH 2/5] gpiolib: Initialize the hardware with a callback
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH 2/5] gpiolib: Initialize the hardware with a callback
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v17 01/14] bitops: Introduce the for_each_set_clump8 macro
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: [PATCH v17 01/14] bitops: Introduce the for_each_set_clump8 macro
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v1 1/2] pinctrl: Add pinmux & GPIO controller driver for new SoC
  • From: "Tanwar, Rahul" <rahul.tanwar@xxxxxxxxxxxxxxx>
• [PATCH v7] gpio/mpc8xxx: change irq handler from chained to normal
  • From: Hui Song <hui.song_1@xxxxxxx>
• Re: [PATCH v17 01/14] bitops: Introduce the for_each_set_clump8 macro
  • From: Masahiro Yamada <yamada.masahiro@xxxxxxxxxxxxx>
• Re: [RFC] gpio: expose pull-up/pull-down line flags to userspace
  • From: Kent Gibson <warthog618@xxxxxxxxx>
• Re: [PATCH v18 01/14] bitops: Introduce the for_each_set_clump8 macro
  • From: Andrew Morton <akpm@xxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 2/5] gpiolib: Initialize the hardware with a callback
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• Re: [PATCH v17 01/14] bitops: Introduce the for_each_set_clump8 macro
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: [PATCH] leds: gpio: support multi-level brightness
  • From: Jacek Anaszewski <jacek.anaszewski@xxxxxxxxx>
• Re: [PATCH v18 00/14] Introduce the for_each_set_clump8 macro
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v18 05/14] gpio: gpio-mm: Utilize for_each_set_clump8 macro
  • From: William Breathitt Gray <vilhelm.gray@xxxxxxxxx>
• [PATCH v18 03/14] gpio: 104-dio-48e: Utilize for_each_set_clump8 macro
  • From: William Breathitt Gray <vilhelm.gray@xxxxxxxxx>
• [PATCH v18 00/14] Introduce the for_each_set_clump8 macro
  • From: William Breathitt Gray <vilhelm.gray@xxxxxxxxx>
• [PATCH v18 06/14] gpio: ws16c48: Utilize for_each_set_clump8 macro
  • From: William Breathitt Gray <vilhelm.gray@xxxxxxxxx>
• [PATCH v18 10/14] gpio: 74x164: Utilize the for_each_set_clump8 macro
  • From: William Breathitt Gray <vilhelm.gray@xxxxxxxxx>
• [PATCH v18 12/14] gpio: pisosr: Utilize the for_each_set_clump8 macro
  • From: William Breathitt Gray <vilhelm.gray@xxxxxxxxx>
• [PATCH v18 14/14] gpio: pca953x: Utilize the for_each_set_clump8 macro
  • From: William Breathitt Gray <vilhelm.gray@xxxxxxxxx>
• [PATCH v18 13/14] gpio: max3191x: Utilize the for_each_set_clump8 macro
  • From: William Breathitt Gray <vilhelm.gray@xxxxxxxxx>
• [PATCH v18 09/14] gpio: uniphier: Utilize for_each_set_clump8 macro
  • From: William Breathitt Gray <vilhelm.gray@xxxxxxxxx>
• [PATCH v18 08/14] gpio: pcie-idio-24: Utilize for_each_set_clump8 macro
  • From: William Breathitt Gray <vilhelm.gray@xxxxxxxxx>
• [PATCH v18 11/14] thermal: intel: intel_soc_dts_iosf: Utilize for_each_set_clump8 macro
  • From: William Breathitt Gray <vilhelm.gray@xxxxxxxxx>
• [PATCH v18 07/14] gpio: pci-idio-16: Utilize for_each_set_clump8 macro
  • From: William Breathitt Gray <vilhelm.gray@xxxxxxxxx>
• [PATCH v18 04/14] gpio: 104-idi-48: Utilize for_each_set_clump8 macro
  • From: William Breathitt Gray <vilhelm.gray@xxxxxxxxx>
• [PATCH v18 02/14] lib/test_bitmap.c: Add for_each_set_clump8 test cases
  • From: William Breathitt Gray <vilhelm.gray@xxxxxxxxx>
• [PATCH v18 01/14] bitops: Introduce the for_each_set_clump8 macro
  • From: William Breathitt Gray <vilhelm.gray@xxxxxxxxx>
• Re: [PATCH v17 01/14] bitops: Introduce the for_each_set_clump8 macro
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v17 09/14] gpio: uniphier: Utilize for_each_set_clump8 macro
  • From: William Breathitt Gray <vilhelm.gray@xxxxxxxxx>
• Re: [PATCH v17 01/14] bitops: Introduce the for_each_set_clump8 macro
  • From: William Breathitt Gray <vilhelm.gray@xxxxxxxxx>
• [PATCH 5/5] gpio: merrifield: Move hardware initialization to callback
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH 3/5] gpio: intel-mid: Move hardware initialization to callback
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH 2/5] gpiolib: Initialize the hardware with a callback
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH 1/5] gpio: merrifield: Restore use of irq_base
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH 4/5] gpio: lynxpoint: Move hardware initialization to callback
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [GIT PULL] intel-gpio for 5.4-2
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [GIT PULL] intel-gpio for 5.4-2
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v17 09/14] gpio: uniphier: Utilize for_each_set_clump8 macro
  • From: Masahiro Yamada <yamada.masahiro@xxxxxxxxxxxxx>
• Re: [PATCH v6] gpio/mpc8xxx: change irq handler from chained to normal
  • From: Russell King - ARM Linux admin <linux@xxxxxxxxxxxxxxx>
• Re: [PATCH v6] gpio/mpc8xxx: change irq handler from chained to normal
  • From: Bartosz Golaszewski <bgolaszewski@xxxxxxxxxxxx>
• Re: [PATCH v17 01/14] bitops: Introduce the for_each_set_clump8 macro
  • From: Masahiro Yamada <yamada.masahiro@xxxxxxxxxxxxx>
• Re: [PATCH] gpio: 104-idi-48e: make array register_offset static, makes object smaller
  • From: Bartosz Golaszewski <bgolaszewski@xxxxxxxxxxxx>
• Re: [RFC] gpio: expose pull-up/pull-down line flags to userspace
  • From: Kent Gibson <warthog618@xxxxxxxxx>
• Re: [PATCH] libgpoiod: add pull-up/pull-down flags for gpio lines
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• Re: [RFC] gpio: expose pull-up/pull-down line flags to userspace
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• [PATCH v17 08/14] gpio: pcie-idio-24: Utilize for_each_set_clump8 macro
  • From: William Breathitt Gray <vilhelm.gray@xxxxxxxxx>
• [PATCH v17 05/14] gpio: gpio-mm: Utilize for_each_set_clump8 macro
  • From: William Breathitt Gray <vilhelm.gray@xxxxxxxxx>
• [PATCH v17 06/14] gpio: ws16c48: Utilize for_each_set_clump8 macro
  • From: William Breathitt Gray <vilhelm.gray@xxxxxxxxx>
• [PATCH v17 04/14] gpio: 104-idi-48: Utilize for_each_set_clump8 macro
  • From: William Breathitt Gray <vilhelm.gray@xxxxxxxxx>
• [PATCH v17 03/14] gpio: 104-dio-48e: Utilize for_each_set_clump8 macro
  • From: William Breathitt Gray <vilhelm.gray@xxxxxxxxx>
• [PATCH v17 02/14] lib/test_bitmap.c: Add for_each_set_clump8 test cases
  • From: William Breathitt Gray <vilhelm.gray@xxxxxxxxx>
• [PATCH v17 01/14] bitops: Introduce the for_each_set_clump8 macro
  • From: William Breathitt Gray <vilhelm.gray@xxxxxxxxx>
• [PATCH v17 07/14] gpio: pci-idio-16: Utilize for_each_set_clump8 macro
  • From: William Breathitt Gray <vilhelm.gray@xxxxxxxxx>
• [PATCH v17 14/14] gpio: pca953x: Utilize the for_each_set_clump8 macro
  • From: William Breathitt Gray <vilhelm.gray@xxxxxxxxx>
• [PATCH v17 13/14] gpio: max3191x: Utilize the for_each_set_clump8 macro
  • From: William Breathitt Gray <vilhelm.gray@xxxxxxxxx>
• [PATCH v17 12/14] gpio: pisosr: Utilize the for_each_set_clump8 macro
  • From: William Breathitt Gray <vilhelm.gray@xxxxxxxxx>
• [PATCH v17 11/14] thermal: intel: intel_soc_dts_iosf: Utilize for_each_set_clump8 macro
  • From: William Breathitt Gray <vilhelm.gray@xxxxxxxxx>
• [PATCH v17 10/14] gpio: 74x164: Utilize the for_each_set_clump8 macro
  • From: William Breathitt Gray <vilhelm.gray@xxxxxxxxx>
• [PATCH v17 09/14] gpio: uniphier: Utilize for_each_set_clump8 macro
  • From: William Breathitt Gray <vilhelm.gray@xxxxxxxxx>
• [PATCH v17 00/14] Introduce the for_each_set_clump8 macro
  • From: William Breathitt Gray <vilhelm.gray@xxxxxxxxx>
• Re: [PATCH] leds: gpio: support multi-level brightness
  • From: Akinobu Mita <akinobu.mita@xxxxxxxxx>
• Re: [RFC] gpio: expose pull-up/pull-down line flags to userspace
  • From: Kent Gibson <warthog618@xxxxxxxxx>
• Re: [RFC] gpio: expose pull-up/pull-down line flags to userspace
  • From: Kent Gibson <warthog618@xxxxxxxxx>
• Re: [RFC] gpio: expose pull-up/pull-down line flags to userspace
  • From: Drew Fustini <drew@xxxxxxxx>
• Re: [RFC] gpio: expose pull-up/pull-down line flags to userspace
  • From: Drew Fustini <drew@xxxxxxxx>
• Re: [RFC] gpio: expose pull-up/pull-down line flags to userspace
  • From: Kent Gibson <warthog618@xxxxxxxxx>
• [PATCH] libgpoiod: add pull-up/pull-down flags for gpio lines
  • From: Drew Fustini <drew@xxxxxxxx>
• Re: [PATCH] pinctrl: at91: Pass irqchip when adding gpiochip
  • From: Ludovic Desroches <ludovic.desroches@xxxxxxxxxxxxx>
• Re: [RFC] gpio: expose pull-up/pull-down line flags to userspace
  • From: Drew Fustini <drew@xxxxxxxx>
• Re: [RFC] gpio: expose pull-up/pull-down line flags to userspace
  • From: Drew Fustini <pdp7pdp7@xxxxxxxxx>
• Re: [RFC] gpio: expose pull-up/pull-down line flags to userspace
  • From: Drew Fustini <drew@xxxxxxxx>
• Re: [PATCH 3/3] gpio: da9062: add driver support
  • From: Marco Felsch <m.felsch@xxxxxxxxxxxxxx>
• Re: [PATCH 3/3] gpio: da9062: add driver support
  • From: Marco Felsch <m.felsch@xxxxxxxxxxxxxx>
• Re: [PATCH v15 01/14] bitops: Introduce the for_each_set_clump8 macro
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH V1] dt-bindings: pinctrl: qcom-pmic-gpio: Add support for pm6150/pm6150l
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• [PATCH v2 1/1] pinctrl: stmfx: add irq_request/release_resources callbacks
  • From: Amelie Delaunay <amelie.delaunay@xxxxxx>
• Re: [PATCH 2/2] docs: driver-api: bt8xxgpio: Revive dead link
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH 1/2] docs: driver-api: Move bt8xxgpio to the gpio directory
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• [PATCH v6] gpio/mpc8xxx: change irq handler from chained to normal
  • From: Hui Song <hui.song_1@xxxxxxx>
• Re: [PATCH] gpio: fix kernel-doc for of_gpio_need_valid_mask()
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH] pinctrl: armada-37xx: swap polarity on LED group
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [RFC] gpio: expose pull-up/pull-down line flags to userspace
  • From: Kent Gibson <warthog618@xxxxxxxxx>
• [PATCH] pinctrl: sprd: Add PIN_CONFIG_BIAS_DISABLE configuration support
  • From: Baolin Wang <baolin.wang@xxxxxxxxxx>
• Re: [RFC] gpio: expose pull-up/pull-down line flags to userspace
  • From: Kent Gibson <warthog618@xxxxxxxxx>
• Re: [RFC] gpio: expose pull-up/pull-down line flags to userspace
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• Re: [RFC] gpio: expose pull-up/pull-down line flags to userspace
  • From: Kent Gibson <warthog618@xxxxxxxxx>
• Re: [RFC] gpio: expose pull-up/pull-down line flags to userspace
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• Re: [RFC] gpio: expose pull-up/pull-down line flags to userspace
  • From: Kent Gibson <warthog618@xxxxxxxxx>
• Re: [RFC] gpio: expose pull-up/pull-down line flags to userspace
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• Re: [PATCH] leds: gpio: support multi-level brightness
  • From: Jacek Anaszewski <jacek.anaszewski@xxxxxxxxx>
• [PATCH] gpio: fix kernel-doc for of_gpio_need_valid_mask()
  • From: Randy Dunlap <rdunlap@xxxxxxxxxxxxx>
• Re: [GIT PULL] GPIO fixes for the v5.4 series
  • From: pr-tracker-bot@xxxxxxxxxx
• Re: [PATCH v2 2/3] pinctrl: meson-a1: add pinctrl driver for Meson A1 Soc
  • From: Neil Armstrong <narmstrong@xxxxxxxxxxxx>
• [PATCH v2 3/3] arm64: dts: meson: a1: add pinctrl controller support
  • From: Qianggui Song <qianggui.song@xxxxxxxxxxx>
• [PATCH v2 2/3] pinctrl: meson-a1: add pinctrl driver for Meson A1 Soc
  • From: Qianggui Song <qianggui.song@xxxxxxxxxxx>
• [PATCH v2 1/3] pinctrl: add compatible for Amlogic Meson A1 pin controller
  • From: Qianggui Song <qianggui.song@xxxxxxxxxxx>
• [PATCH v2 0/3] pinctrl: meson-a1: add pinctrl driver
  • From: Qianggui Song <qianggui.song@xxxxxxxxxxx>
• [GIT PULL] intel-pinctrl fixes for v5.4
  • From: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>
• [PATCH] pinctrl: rockchip: add rk3308 SoC support
  • From: Jianqun Xu <jay.xu@xxxxxxxxxxxxxx>
• [GIT PULL] GPIO fixes for the v5.4 series
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [RFC] gpio: expose pull-up/pull-down line flags to userspace
  • From: Kent Gibson <warthog618@xxxxxxxxx>
• Re: [PATCH 0/7] pinctrl: Fixes for AST2600 support
  • From: Joel Stanley <joel@xxxxxxxxx>
• [PATCH 7/7] pinctrl: aspeed-g6: Rename SD3 to EMMC and rework pin groups
  • From: Andrew Jeffery <andrew@xxxxxxxx>
• [PATCH 5/7] pinctrl: aspeed-g6: Make SIG_DESC_CLEAR() behave intuitively
  • From: Andrew Jeffery <andrew@xxxxxxxx>
• [PATCH 6/7] pinctrl: aspeed-g6: Fix UART13 group pinmux
  • From: Andrew Jeffery <andrew@xxxxxxxx>
• [PATCH 3/7] pinctrl: aspeed-g6: Fix I2C14 SDA description
  • From: Andrew Jeffery <andrew@xxxxxxxx>
• [PATCH 4/7] pinctrl: aspeed-g6: Fix I3C3/I3C4 pinmux configuration
  • From: Andrew Jeffery <andrew@xxxxxxxx>
• [PATCH 2/7] pinctrl: aspeed-g6: Sort pins for sanity
  • From: Andrew Jeffery <andrew@xxxxxxxx>
• [PATCH 1/7] dt-bindings: pinctrl: aspeed-g6: Rework SD3 function and groups
  • From: Andrew Jeffery <andrew@xxxxxxxx>
• [PATCH 0/7] pinctrl: Fixes for AST2600 support
  • From: Andrew Jeffery <andrew@xxxxxxxx>
• Re: [PATCH v2 2/2] pinctrl: iproc: use unique name for irq chip
  • From: Scott Branden <scott.branden@xxxxxxxxxxxx>
• Re: [PATCH V4 2/2] gpio: inverter: document the inverter bindings
  • From: Stephen Warren <swarren@xxxxxxxxxxxxx>
• Re: [PATCH v16 01/14] bitops: Introduce the for_each_set_clump8 macro
  • From: William Breathitt Gray <vilhelm.gray@xxxxxxxxx>
• Re: [PATCH 1/1] pinctrl: stmfx: add irq_request/release_resources callbacks
  • From: Amelie DELAUNAY <amelie.delaunay@xxxxxx>
• Re: [PATCH] pinctrl: intel: Pass irqchip when adding gpiochip
  • From: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>
• [PATCH] pinctrl: rzn1: array reg_drive static, makes object smaller
  • From: Colin King <colin.king@xxxxxxxxxxxxx>
• [PATCH 0/3] dt-bindings: fix issues seen during STM32 DT validation
  • From: Alexandre Torgue <alexandre.torgue@xxxxxx>
• [PATCH 1/3] dt-bindings: arm: stm32: Add missing STM32 boards
  • From: Alexandre Torgue <alexandre.torgue@xxxxxx>
• [PATCH 2/3] dt-bindings: pinctrl: stm32: Fix 'st,syscfg' description field
  • From: Alexandre Torgue <alexandre.torgue@xxxxxx>
• [PATCH 3/3] dt-bindings: usb: generic-ehci: Add "companion" entry
  • From: Alexandre Torgue <alexandre.torgue@xxxxxx>
• Applied "gpiolib: introduce devm_fwnode_gpiod_get_index()" to the regulator tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH] pinctrl: rza2: Fix gpio name typos
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: [PATCH 3/3] gpio: da9062: add driver support
  • From: Marco Felsch <m.felsch@xxxxxxxxxxxxxx>
• Re: [PATCH v16 14/14] gpio: pca953x: Utilize the for_each_set_clump8 macro
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v16 11/14] thermal: intel: intel_soc_dts_iosf: Utilize for_each_set_clump8 macro
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v16 10/14] gpio: 74x164: Utilize the for_each_set_clump8 macro
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v16 01/14] bitops: Introduce the for_each_set_clump8 macro
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH V4 2/2] gpio: inverter: document the inverter bindings
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: [PATCH v2 2/2] pinctrl: iproc: use unique name for irq chip
  • From: Marc Zyngier <maz@xxxxxxxxxx>
• Re: [PATCH] pinctrl: intel: Pass irqchip when adding gpiochip
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v2] pinctrl: intel: baytrail: Pass irqchip when adding gpiochip
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v2 2/2] pinctrl: iproc: use unique name for irq chip
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: [PATCH 2/2] dt-bindings: pinctrl: Add MSM8976 driver bindings and documentation
  • From: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
• Re: [PATCH 1/2] pinctrl: qcom: Add a pinctrl driver for MSM8976 and 8956
  • From: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
• Re: [RFC] gpio: expose pull-up/pull-down line flags to userspace
  • From: Kent Gibson <warthog618@xxxxxxxxx>
• linusw/for-next boot: 42 boots: 0 failed, 42 passed (v5.4-rc1-14-g6dd9b912c9b4)
  • From: "kernelci.org bot" <bot@xxxxxxxxxxxx>
• linusw/for-next build: 6 builds: 0 failed, 6 passed, 13 warnings (v5.4-rc1-14-g6dd9b912c9b4)
  • From: "kernelci.org bot" <bot@xxxxxxxxxxxx>
• Re: [RFC] gpio: expose pull-up/pull-down line flags to userspace
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH v15 13/14] gpio: max3191x: Utilize the for_each_set_clump8 macro
  • From: kbuild test robot <lkp@xxxxxxxxx>
• [PATCH v16 01/14] bitops: Introduce the for_each_set_clump8 macro
  • From: William Breathitt Gray <vilhelm.gray@xxxxxxxxx>
• [PATCH v16 07/14] gpio: pci-idio-16: Utilize for_each_set_clump8 macro
  • From: William Breathitt Gray <vilhelm.gray@xxxxxxxxx>
• [PATCH v16 10/14] gpio: 74x164: Utilize the for_each_set_clump8 macro
  • From: William Breathitt Gray <vilhelm.gray@xxxxxxxxx>
• [PATCH v16 06/14] gpio: ws16c48: Utilize for_each_set_clump8 macro
  • From: William Breathitt Gray <vilhelm.gray@xxxxxxxxx>
• [PATCH v16 04/14] gpio: 104-idi-48: Utilize for_each_set_clump8 macro
  • From: William Breathitt Gray <vilhelm.gray@xxxxxxxxx>
• [PATCH v16 03/14] gpio: 104-dio-48e: Utilize for_each_set_clump8 macro
  • From: William Breathitt Gray <vilhelm.gray@xxxxxxxxx>
• [PATCH v16 05/14] gpio: gpio-mm: Utilize for_each_set_clump8 macro
  • From: William Breathitt Gray <vilhelm.gray@xxxxxxxxx>
• [PATCH v16 14/14] gpio: pca953x: Utilize the for_each_set_clump8 macro
  • From: William Breathitt Gray <vilhelm.gray@xxxxxxxxx>
• [PATCH v16 11/14] thermal: intel: intel_soc_dts_iosf: Utilize for_each_set_clump8 macro
  • From: William Breathitt Gray <vilhelm.gray@xxxxxxxxx>
• [PATCH v16 13/14] gpio: max3191x: Utilize the for_each_set_clump8 macro
  • From: William Breathitt Gray <vilhelm.gray@xxxxxxxxx>
• [PATCH v16 12/14] gpio: pisosr: Utilize the for_each_set_clump8 macro
  • From: William Breathitt Gray <vilhelm.gray@xxxxxxxxx>
• [PATCH v16 09/14] gpio: uniphier: Utilize for_each_set_clump8 macro
  • From: William Breathitt Gray <vilhelm.gray@xxxxxxxxx>
• [PATCH v16 08/14] gpio: pcie-idio-24: Utilize for_each_set_clump8 macro
  • From: William Breathitt Gray <vilhelm.gray@xxxxxxxxx>
• [PATCH v16 02/14] lib/test_bitmap.c: Add for_each_set_clump8 test cases
  • From: William Breathitt Gray <vilhelm.gray@xxxxxxxxx>
• [PATCH v16 00/14] Introduce the for_each_set_clump8 macro
  • From: William Breathitt Gray <vilhelm.gray@xxxxxxxxx>
• Re: [PATCH] gpio: 104-idi-48e: make array register_offset static, makes object smaller
  • From: William Breathitt Gray <vilhelm.gray@xxxxxxxxx>
• [PATCH] gpio: 104-idi-48e: make array register_offset static, makes object smaller
  • From: Colin King <colin.king@xxxxxxxxxxxxx>
• Re: [PATCH] leds: gpio: support multi-level brightness
  • From: Akinobu Mita <akinobu.mita@xxxxxxxxx>
• Re: [PATCH] leds: gpio: support multi-level brightness
  • From: Akinobu Mita <akinobu.mita@xxxxxxxxx>
• [PATCH v3 3/8] lib: devres: provide devm_ioremap_resource_wc()
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• [PATCH v3 2/8] lib: devres: prepare devm_ioremap_resource() for more variants
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• [PATCH v3 4/8] drivers: platform: provide devm_platform_ioremap_resource_wc()
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• [PATCH v3 5/8] misc: sram: use devm_platform_ioremap_resource_wc()
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• [PATCH v3 6/8] drivers: provide devm_platform_ioremap_resource_byname()
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• [PATCH v3 7/8] gpio: mvebu: use devm_platform_ioremap_resource_byname()
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• [PATCH v3 8/8] gpio: tegra186: use devm_platform_ioremap_resource_byname()
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• [PATCH v3 1/8] Documentation: devres: add missing entry for devm_platform_ioremap_resource()
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• [PATCH v3 0/8] drivers: add new variants of devm_platform_ioremap_resource()
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• Re: [PATCH] leds: gpio: support multi-level brightness
  • From: Bjorn Andersson <bjorn@xxxxxxx>
• Re: [RFC] gpio: expose pull-up/pull-down line flags to userspace
  • From: Kent Gibson <warthog618@xxxxxxxxx>
• [PATCH] pinctrl: intel: Pass irqchip when adding gpiochip
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH] pinctrl: ingenic: Pass irqchip when adding gpiochip
  • From: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
• Re: [PATCH v15 13/14] gpio: max3191x: Utilize the for_each_set_clump8 macro
  • From: kbuild test robot <lkp@xxxxxxxxx>
• [PATCH v2] pinctrl: intel: baytrail: Pass irqchip when adding gpiochip
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH] leds: gpio: support multi-level brightness
  • From: Jacek Anaszewski <jacek.anaszewski@xxxxxxxxx>
• Re: [PATCH v15 00/14] Introduce the for_each_set_clump8 macro
  • From: William Breathitt Gray <vilhelm.gray@xxxxxxxxx>
• [PATCH v15 05/14] gpio: gpio-mm: Utilize for_each_set_clump8 macro
  • From: William Breathitt Gray <vilhelm.gray@xxxxxxxxx>
• [PATCH v15 08/14] gpio: pcie-idio-24: Utilize for_each_set_clump8 macro
  • From: William Breathitt Gray <vilhelm.gray@xxxxxxxxx>
• [PATCH v15 11/14] thermal: intel: intel_soc_dts_iosf: Utilize for_each_set_clump8 macro
  • From: William Breathitt Gray <vilhelm.gray@xxxxxxxxx>
• [PATCH v15 14/14] gpio: pca953x: Utilize the for_each_set_clump8 macro
  • From: William Breathitt Gray <vilhelm.gray@xxxxxxxxx>
• [PATCH v15 13/14] gpio: max3191x: Utilize the for_each_set_clump8 macro
  • From: William Breathitt Gray <vilhelm.gray@xxxxxxxxx>
• [PATCH v15 12/14] gpio: pisosr: Utilize the for_each_set_clump8 macro
  • From: William Breathitt Gray <vilhelm.gray@xxxxxxxxx>
• [PATCH v15 10/14] gpio: 74x164: Utilize the for_each_set_clump8 macro
  • From: William Breathitt Gray <vilhelm.gray@xxxxxxxxx>
• [PATCH v15 09/14] gpio: uniphier: Utilize for_each_set_clump8 macro
  • From: William Breathitt Gray <vilhelm.gray@xxxxxxxxx>
• [PATCH v15 07/14] gpio: pci-idio-16: Utilize for_each_set_clump8 macro
  • From: William Breathitt Gray <vilhelm.gray@xxxxxxxxx>
• [PATCH v15 06/14] gpio: ws16c48: Utilize for_each_set_clump8 macro
  • From: William Breathitt Gray <vilhelm.gray@xxxxxxxxx>
• [PATCH v15 03/14] gpio: 104-dio-48e: Utilize for_each_set_clump8 macro
  • From: William Breathitt Gray <vilhelm.gray@xxxxxxxxx>
• [PATCH v15 04/14] gpio: 104-idi-48: Utilize for_each_set_clump8 macro
  • From: William Breathitt Gray <vilhelm.gray@xxxxxxxxx>
• [PATCH v15 02/14] lib/test_bitmap.c: Add for_each_set_clump8 test cases
  • From: William Breathitt Gray <vilhelm.gray@xxxxxxxxx>
• [PATCH v15 01/14] bitops: Introduce the for_each_set_clump8 macro
  • From: William Breathitt Gray <vilhelm.gray@xxxxxxxxx>
• [PATCH v15 00/14] Introduce the for_each_set_clump8 macro
  • From: William Breathitt Gray <vilhelm.gray@xxxxxxxxx>
• linusw/fixes boot: 43 boots: 0 failed, 43 passed (v5.4-rc1-5-gfffa6af94894)
  • From: "kernelci.org bot" <bot@xxxxxxxxxxxx>
• linusw/devel boot: 43 boots: 0 failed, 42 passed with 1 untried/unknown (v5.4-rc1-8-g8c550e94b883)
  • From: "kernelci.org bot" <bot@xxxxxxxxxxxx>
• Re: [PATCH V4 2/2] gpio: inverter: document the inverter bindings
  • From: Eugeniu Rosca <roscaeugeniu@xxxxxxxxx>
• linusw/fixes build: 6 builds: 0 failed, 6 passed, 13 warnings (v5.4-rc1-5-gfffa6af94894)
  • From: "kernelci.org bot" <bot@xxxxxxxxxxxx>
• linusw/devel build: 6 builds: 0 failed, 6 passed, 13 warnings (v5.4-rc1-8-g8c550e94b883)
  • From: "kernelci.org bot" <bot@xxxxxxxxxxxx>
• Re: [RFC] gpio: expose pull-up/pull-down line flags to userspace
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH 1/1] pinctrl: stmfx: add irq_request/release_resources callbacks
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH 1/1] pinctrl: stmfx: fix null pointer on remove
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH v2 2/2] pinctrl: iproc: use unique name for irq chip
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH v2 1/2] pinctrl: iproc: allow for error from platform_get_irq()
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH] leds: gpio: support multi-level brightness
  • From: Akinobu Mita <akinobu.mita@xxxxxxxxx>
• Re: [PATCH] leds: gpio: support multi-level brightness
  • From: Akinobu Mita <akinobu.mita@xxxxxxxxx>
• Re: [PATCH V4 2/2] gpio: inverter: document the inverter bindings
  • From: Eugeniu Rosca <roscaeugeniu@xxxxxxxxx>
• [PATCH 1/2] pinctrl: qcom: Add a pinctrl driver for MSM8976 and 8956
  • From: kholk11@xxxxxxxxx
• [PATCH 2/2] dt-bindings: pinctrl: Add MSM8976 driver bindings and documentation
  • From: kholk11@xxxxxxxxx
• [PATCH 0/2] Pinctrl driver for MSM8976 and MSM8956
  • From: kholk11@xxxxxxxxx
• Re: [PATCH 5/5] soc: qcom: rpmpd: Add rpm power domains for msm8956
  • From: AngeloGioacchino Del Regno <kholk11@xxxxxxxxx>
• Re: [PATCH 1/5] pinctrl: qcom: Add a pinctrl driver for MSM8976 and 8956
  • From: AngeloGioacchino Del Regno <kholk11@xxxxxxxxx>
• Re: [PATCH V1] dt-bindings: pinctrl: qcom-pmic-gpio: Add support for pm6150/pm6150l
  • From: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
• Re: [PATCH 4/5] dt-bindings: power: Add missing rpmpd smd performance level
  • From: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
• Re: [PATCH 5/5] soc: qcom: rpmpd: Add rpm power domains for msm8956
  • From: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
• Re: [PATCH 3/5] soc: qcom: smd-rpm: Add MSM8976 compatible
  • From: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
• Re: [PATCH 1/5] pinctrl: qcom: Add a pinctrl driver for MSM8976 and 8956
  • From: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
• linusw/for-next boot: 38 boots: 0 failed, 38 passed (v5.4-rc1-9-gff8baf289f37)
  • From: "kernelci.org bot" <bot@xxxxxxxxxxxx>
• Re: [PATCH] ns2: Fix off by one bugs in ns2_pinmux_enable()
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH 0/6] gpio: replace nocache ioremap functions with devm_platform_ioremap_resource()
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• linusw/for-next build: 6 builds: 0 failed, 6 passed, 13 warnings (v5.4-rc1-9-gff8baf289f37)
  • From: "kernelci.org bot" <bot@xxxxxxxxxxxx>
• Re: [PATCH v5 2/2] gpio: tegra186: Implement wake event support
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH 3/3] gpio: max77620: Fix interrupt handling
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH 2/3] gpio: max77620: Do not allocate IRQs upfront
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH 1/3] gpio: max77620: Use correct unit for debounce times
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH v2] pinctrl: armada-37xx: fix control of pins 32 and up
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH 00/11] Add support for software nodes to gpiolib
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH] pinctrl: devicetree.c: remove orphan pinctrl_dt_has_hogs()
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH 3/3] gpio: syscon: Add support for the Xylon LogiCVC GPIOs
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>