[PATCH v3 2/5] gpiolib: add support for pull up/down to lineevent_create

[Kent Gibson <warthog618@xxxxxxxxx>]

This patch adds support for pull up/down to lineevent_create.
Use cases include receiving asynchronous presses from a
push button without an external pull up/down.

The patch also restricts the application of bias to lines
explicitly requested as inputs to prevent bias being applied
to as-is line requests.

Signed-off-by: Kent Gibson <warthog618@xxxxxxxxx>
---
 drivers/gpio/gpiolib.c | 10 ++++++++++
 1 file changed, 10 insertions(+)

diff --git a/drivers/gpio/gpiolib.c b/drivers/gpio/gpiolib.c
index 604dc17b3207..eef964417521 100644
--- a/drivers/gpio/gpiolib.c
+++ b/drivers/gpio/gpiolib.c
@@ -554,6 +554,12 @@ static int linehandle_create(struct gpio_device *gdev, void __user *ip)
 	     (lflags & GPIOHANDLE_REQUEST_OPEN_SOURCE)))
 		return -EINVAL;
 
+	/* PULL_UP and PULL_DOWN flags only make sense for input mode. */
+	if (!(lflags & GPIOHANDLE_REQUEST_INPUT) &&
+	    ((lflags & GPIOHANDLE_REQUEST_PULL_UP) ||
+	     (lflags & GPIOHANDLE_REQUEST_PULL_DOWN)))
+		return -EINVAL;
+
 	lh = kzalloc(sizeof(*lh), GFP_KERNEL);
 	if (!lh)
 		return -ENOMEM;
@@ -944,6 +950,10 @@ static int lineevent_create(struct gpio_device *gdev, void __user *ip)
 
 	if (lflags & GPIOHANDLE_REQUEST_ACTIVE_LOW)
 		set_bit(FLAG_ACTIVE_LOW, &desc->flags);
+	if (lflags & GPIOHANDLE_REQUEST_PULL_DOWN)
+		set_bit(FLAG_PULL_DOWN, &desc->flags);
+	if (lflags & GPIOHANDLE_REQUEST_PULL_UP)
+		set_bit(FLAG_PULL_UP, &desc->flags);
 
 	ret = gpiod_direction_input(desc);
 	if (ret)
-- 
2.23.0