This patch adds support for the pull up/down state set via gpiolib line requests to be reflected in the state of the mockup. Use case is for testing of the GPIO uAPI, specifically the pull up/down flags. Signed-off-by: Kent Gibson <warthog618@xxxxxxxxx> --- drivers/gpio/gpio-mockup.c | 94 ++++++++++++++++++++++++-------------- 1 file changed, 60 insertions(+), 34 deletions(-) diff --git a/drivers/gpio/gpio-mockup.c b/drivers/gpio/gpio-mockup.c index 213aedc97dc2..c28219962ae2 100644 --- a/drivers/gpio/gpio-mockup.c +++ b/drivers/gpio/gpio-mockup.c @@ -146,6 +146,61 @@ static void gpio_mockup_set_multiple(struct gpio_chip *gc, mutex_unlock(&chip->lock); } +static int gpio_mockup_apply_pull(struct gpio_mockup_chip *chip, + unsigned int offset, int value) +{ + struct gpio_desc *desc; + struct gpio_chip *gc; + struct irq_sim *sim; + int curr, irq, irq_type; + + gc = &chip->gc; + desc = &gc->gpiodev->descs[offset]; + sim = &chip->irqsim; + + mutex_lock(&chip->lock); + + if (test_bit(FLAG_REQUESTED, &desc->flags) && + !test_bit(FLAG_IS_OUT, &desc->flags)) { + curr = __gpio_mockup_get(chip, offset); + if (curr == value) + goto out; + + irq = irq_sim_irqnum(sim, offset); + irq_type = irq_get_trigger_type(irq); + + if ((value == 1 && (irq_type & IRQ_TYPE_EDGE_RISING)) || + (value == 0 && (irq_type & IRQ_TYPE_EDGE_FALLING))) + irq_sim_fire(sim, offset); + } + + /* Change the value unless we're actively driving the line. */ + if (!test_bit(FLAG_REQUESTED, &desc->flags) || + !test_bit(FLAG_IS_OUT, &desc->flags)) + __gpio_mockup_set(chip, offset, value); + +out: + chip->lines[offset].pull = value; + mutex_unlock(&chip->lock); + return 0; +} + +static int gpio_mockup_set_config(struct gpio_chip *gc, + unsigned int offset, unsigned long config) +{ + struct gpio_mockup_chip *chip = gpiochip_get_data(gc); + + switch (pinconf_to_config_param(config)) { + case PIN_CONFIG_BIAS_PULL_UP: + return gpio_mockup_apply_pull(chip, offset, 1); + case PIN_CONFIG_BIAS_PULL_DOWN: + return gpio_mockup_apply_pull(chip, offset, 0); + default: + break; + } + return -ENOTSUPP; +} + static int gpio_mockup_dirout(struct gpio_chip *gc, unsigned int offset, int value) { @@ -226,12 +281,8 @@ static ssize_t gpio_mockup_debugfs_write(struct file *file, size_t size, loff_t *ppos) { struct gpio_mockup_dbgfs_private *priv; - int rv, val, curr, irq, irq_type; - struct gpio_mockup_chip *chip; + int rv, val; struct seq_file *sfile; - struct gpio_desc *desc; - struct gpio_chip *gc; - struct irq_sim *sim; if (*ppos != 0) return -EINVAL; @@ -244,35 +295,9 @@ static ssize_t gpio_mockup_debugfs_write(struct file *file, sfile = file->private_data; priv = sfile->private; - chip = priv->chip; - gc = &chip->gc; - desc = &gc->gpiodev->descs[priv->offset]; - sim = &chip->irqsim; - - mutex_lock(&chip->lock); - - if (test_bit(FLAG_REQUESTED, &desc->flags) && - !test_bit(FLAG_IS_OUT, &desc->flags)) { - curr = __gpio_mockup_get(chip, priv->offset); - if (curr == val) - goto out; - - irq = irq_sim_irqnum(sim, priv->offset); - irq_type = irq_get_trigger_type(irq); - - if ((val == 1 && (irq_type & IRQ_TYPE_EDGE_RISING)) || - (val == 0 && (irq_type & IRQ_TYPE_EDGE_FALLING))) - irq_sim_fire(sim, priv->offset); - } - - /* Change the value unless we're actively driving the line. */ - if (!test_bit(FLAG_REQUESTED, &desc->flags) || - !test_bit(FLAG_IS_OUT, &desc->flags)) - __gpio_mockup_set(chip, priv->offset, val); - -out: - chip->lines[priv->offset].pull = val; - mutex_unlock(&chip->lock); + rv = gpio_mockup_apply_pull(priv->chip, priv->offset, val); + if (rv) + return rv; return size; } @@ -418,6 +443,7 @@ static int gpio_mockup_probe(struct platform_device *pdev) gc->direction_output = gpio_mockup_dirout; gc->direction_input = gpio_mockup_dirin; gc->get_direction = gpio_mockup_get_direction; + gc->set_config = gpio_mockup_set_config; gc->to_irq = gpio_mockup_to_irq; gc->free = gpio_mockup_free; -- 2.23.0