[PATCH v3 0/2] gpio: brcm: XGS iProc GPIO driver

[Chris Packham <chris.packham@xxxxxxxxxxxxxxxxxxx>]

This is ported this from Broadcom's XLDK (now heavily modified). There seem to
be 3 different IP blocks for 3 separate banks of GPIOs in the iProc chips.

I've dropped everything except support for the Chip Common A GPIO
controller because the other blocks actually seem to be supportable with
other drivers. The driver itself is halfway between pinctrl-nsp-gpio.c
and pinctrl-iproc-gpio.c.

Chris Packham (2):
  dt-bindings: gpio: brcm: Add bindings for xgs-iproc
  gpio: Add xgs-iproc driver

 .../bindings/gpio/brcm,xgs-iproc.yaml         |  70 ++++
 drivers/gpio/Kconfig                          |   9 +
 drivers/gpio/Makefile                         |   1 +
 drivers/gpio/gpio-xgs-iproc.c                 | 321 ++++++++++++++++++
 4 files changed, 401 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/gpio/brcm,xgs-iproc.yaml
 create mode 100644 drivers/gpio/gpio-xgs-iproc.c

-- 
2.23.0