Linux ARM MSM

• Thread Index

• Re: [PATCH v3 1/3] dt-bindings: phy: qcom,qmp: Add PCIe qcom,refclk-always-on property
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v1 1/2] regulator: qcom_smd: Add LDO5 MP5496 regulator
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v1 2/2] arm64: dts: qcom: ipq9574: Fix USB 'vdda-pll-supply'
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [PATCH v1 2/2] arm64: dts: qcom: ipq9574: Fix USB 'vdda-pll-supply'
  • From: Varadarajan Narayanan <varada@xxxxxxxxxxxxxxxxxxxxxxxxxx>
• [PATCH v1 1/2] regulator: qcom_smd: Add LDO5 MP5496 regulator
  • From: Varadarajan Narayanan <varada@xxxxxxxxxxxxxxxxxxxxxxxxxx>
• [PATCH v1 0/2] ipq9574: Fix USB 'vdda-pll-supply'
  • From: Varadarajan Narayanan <varada@xxxxxxxxxxxxxxxxxxxxxxxxxx>
• [PATCH v3] dt-bindings: thermal: qcom-tsens: document the SM8650 Temperature Sensor
  • From: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
• [PATCH v2] dt-bindings: PCI: qcom: document the SM8650 PCIe Controller
  • From: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
• Re: [PATCH RESEND v2] dt-bindings: thermal: qcom-tsens: document the SM8650 Temperature Sensor
  • From: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
• Re: [PATCH RESEND] dt-bindings: PCI: qcom: document the SM8650 PCIe Controller
  • From: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
• [PATCH RESEND v2] dt-bindings: thermal: qcom-tsens: document the SM8650 Temperature Sensor
  • From: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
• [PATCH RESEND] dt-bindings: PCI: qcom: document the SM8650 PCIe Controller
  • From: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
• Re: [PATCH v2 02/12] dt-bindings: display: msm: Add reg bus and rotator interconnects
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v2 01/12] dt-bindings: display: msm: qcm2290-mdss: Use the non-deprecated DSI compat
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [PATCH v2 1/6] PCI/ASPM: Add locked helper for enabling link state
  • From: Johan Hovold <johan+linaro@xxxxxxxxxx>
• [PATCH v2 3/6] PCI: qcom: Fix deadlock when enabling ASPM
  • From: Johan Hovold <johan+linaro@xxxxxxxxxx>
• [PATCH v2 2/6] PCI: vmd: Fix deadlock when enabling ASPM
  • From: Johan Hovold <johan+linaro@xxxxxxxxxx>
• [PATCH v2 5/6] PCI/ASPM: Clean up disable link state parameter
  • From: Johan Hovold <johan+linaro@xxxxxxxxxx>
• [PATCH v2 6/6] PCI/ASPM: Add lockdep assert to link state helper
  • From: Johan Hovold <johan+linaro@xxxxxxxxxx>
• [PATCH v2 4/6] PCI: qcom: Clean up ASPM comment
  • From: Johan Hovold <johan+linaro@xxxxxxxxxx>
• [PATCH v2 0/6] PCI: Fix deadlocks when enabling ASPM
  • From: Johan Hovold <johan+linaro@xxxxxxxxxx>
• Re: [PATCH v2 2/3] arm64: dts: qcom: sc7280: Move video-firmware to chrome-common
  • From: Vikash Garodia <quic_vgarodia@xxxxxxxxxxx>
• Re: [PATCH 15/16] arm64: dts: qcom: sm8550-aim300: add pmic glink port/endpoints
  • From: Tengfei Fan <quic_tengfan@xxxxxxxxxxx>
• Re: [PATCH v5 04/10] scsi: ufs: ufs-qcom: Limit negotiated gear to selected PHY gear
  • From: Can Guo <quic_cang@xxxxxxxxxxx>
• Re: [PATCH v5 07/10] scsi: ufs: ufs-qcom: Set initial PHY gear to max HS gear for HW ver 5 and newer
  • From: Can Guo <quic_cang@xxxxxxxxxxx>
• Re: [PATCH v5 01/10] scsi: ufs: host: Rename structure ufs_dev_params to ufs_host_params
  • From: Can Guo <quic_cang@xxxxxxxxxxx>
• Re: [PATCH v5 06/10] scsi: ufs: ufs-qcom: Limit HS-G5 Rate-A to hosts with HW version 5
  • From: Can Guo <quic_cang@xxxxxxxxxxx>
• Re: [PATCH 2/9] net: mdio: ipq4019: Enable the clocks for ipq5332 platform
  • From: Jie Luo <quic_luoj@xxxxxxxxxxx>
• Re: [PATCH v5 09/10] phy: qualcomm: phy-qcom-qmp-ufs: Add High Speed Gear 5 support for SM8550
  • From: Manivannan Sadhasivam <mani@xxxxxxxxxx>
• Re: [PATCH v5 08/10] phy: qualcomm: phy-qcom-qmp-ufs: Rectify SM8550 UFS HS-G4 PHY Settings
  • From: Manivannan Sadhasivam <mani@xxxxxxxxxx>
• Re: [PATCH v5 07/10] scsi: ufs: ufs-qcom: Set initial PHY gear to max HS gear for HW ver 5 and newer
  • From: Manivannan Sadhasivam <mani@xxxxxxxxxx>
• Re: [PATCH v5 06/10] scsi: ufs: ufs-qcom: Limit HS-G5 Rate-A to hosts with HW version 5
  • From: Manivannan Sadhasivam <mani@xxxxxxxxxx>
• Re: [PATCH v5 04/10] scsi: ufs: ufs-qcom: Limit negotiated gear to selected PHY gear
  • From: Manivannan Sadhasivam <mani@xxxxxxxxxx>
• Re: [PATCH v5 01/10] scsi: ufs: host: Rename structure ufs_dev_params to ufs_host_params
  • From: Nitin Rawat <quic_nitirawa@xxxxxxxxxxx>
• Re: [PATCH v5 01/10] scsi: ufs: host: Rename structure ufs_dev_params to ufs_host_params
  • From: Manivannan Sadhasivam <mani@xxxxxxxxxx>
• Re: [PATCH v5 03/10] scsi: ufs: ufs-qcom: Setup host power mode during init
  • From: Manivannan Sadhasivam <mani@xxxxxxxxxx>
• Re: [PATCH v5 02/10] scsi: ufs: ufs-qcom: No need to set hs_rate after ufshcd_init_host_param()
  • From: Manivannan Sadhasivam <mani@xxxxxxxxxx>
• Re: [PATCH v5 01/10] scsi: ufs: host: Rename structure ufs_dev_params to ufs_host_params
  • From: Manivannan Sadhasivam <mani@xxxxxxxxxx>
• Re: [PATCH v5 02/10] scsi: ufs: ufs-qcom: No need to set hs_rate after ufshcd_init_host_param()
  • From: Nitin Rawat <quic_nitirawa@xxxxxxxxxxx>
• Re: [PATCH v5 06/10] scsi: ufs: ufs-qcom: Limit HS-G5 Rate-A to hosts with HW version 5
  • From: Nitin Rawat <quic_nitirawa@xxxxxxxxxxx>
• Re: [PATCH v5 03/10] scsi: ufs: ufs-qcom: Setup host power mode during init
  • From: Nitin Rawat <quic_nitirawa@xxxxxxxxxxx>
• Re: [PATCH v2 13/21] pinctrl: bcm: Convert to use grp member
  • From: Florian Fainelli <florian.fainelli@xxxxxxxxxxxx>
• Re: [PATCH v3 1/4] iommu/arm-smmu: introduction of ACTLR for custom prefetcher settings
  • From: Bjorn Andersson <andersson@xxxxxxxxxx>
• Re: [PATCH] drm/msm/mdp4: flush vblank event on disable
  • From: Abhinav Kumar <quic_abhinavk@xxxxxxxxxxx>
• [PATCH] pinctrl: qcom: fail to retrieve configuration from invalid pin groups
  • From: Richard Acayan <mailingradian@xxxxxxxxx>
• Re: [PATCH v5 08/10] phy: qualcomm: phy-qcom-qmp-ufs: Rectify SM8550 UFS HS-G4 PHY Settings
  • From: Can Guo <quic_cang@xxxxxxxxxxx>
• Re: [PATCH] drm/msm/dpu: Capture dpu snapshot when frame_done_timer timeouts
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH] drm/msm/dpu: Capture dpu snapshot when frame_done_timer timeouts
  • From: Paloma Arellano <quic_parellan@xxxxxxxxxxx>
• Re: [net-next PATCH RFC v3 2/8] net: phy: add initial support for PHY package in DT
  • From: Andrew Lunn <andrew@xxxxxxx>
• Re: [net-next PATCH RFC v3 6/8] dt-bindings: net: Document Qcom QCA807x PHY package
  • From: Andrew Lunn <andrew@xxxxxxx>
• Re: [net-next PATCH RFC v3 0/8] net: phy: Support DT PHY package
  • From: Andrew Lunn <andrew@xxxxxxx>
• Re: [net-next PATCH RFC v3 1/8] dt-bindings: net: document ethernet PHY package nodes
  • From: Andrew Lunn <andrew@xxxxxxx>
• Re: [PATCH] clk: qcom: Fix SM_CAMCC_8550 dependencies
  • From: Stephen Boyd <sboyd@xxxxxxxxxx>
• Re: [PATCH 2/2] clk: qcom: Add TCSR clock driver for x1e80100
  • From: Stephen Boyd <sboyd@xxxxxxxxxx>
• Re: [PATCH] drm/msm/mdp4: flush vblank event on disable
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [net-next PATCH RFC v3 5/8] dt-bindings: net: add QCA807x PHY defines
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [net-next PATCH RFC v3 6/8] dt-bindings: net: Document Qcom QCA807x PHY package
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [net-next PATCH RFC v3 1/8] dt-bindings: net: document ethernet PHY package nodes
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH] drm/msm/mdp4: flush vblank event on disable
  • From: Abhinav Kumar <quic_abhinavk@xxxxxxxxxxx>
• [PATCH v2] arm64: dts: qcom: sdm632-fairphone-fp3: Enable WiFi/Bluetooth
  • From: Luca Weiss <luca@xxxxxxxxx>
• Re: [PATCH v3] docs: dt-bindings: add DTS Coding Style document
  • From: Rob Herring <robh@xxxxxxxxxx>
• [PATCH] drm/msm/mdp4: flush vblank event on disable
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v2] Remove custom dumb_map_offset implementation in msm driver
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v2] Remove custom dumb_map_offset implementation in msm driver
  • From: Rob Clark <robdclark@xxxxxxxxx>
• Re: [PATCH 1/4] dt-bindings: remoteproc: qcom: wcnss: Add WCN3680B compatible
  • From: Luca Weiss <luca@xxxxxxxxx>
• Re: [PATCH net-next v3 3/3] net: stmmac: Add driver support for DWMAC5 fault IRQ Support
  • From: Andrew Halaney <ahalaney@xxxxxxxxxx>
• Re: [PATCH 1/4] dt-bindings: remoteproc: qcom: wcnss: Add WCN3680B compatible
  • From: Stephan Gerhold <stephan@xxxxxxxxxxx>
• Re: [PATCH v2 1/2] dt-bindings: connector: usb: add accessory mode description
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v10 0/4] Misc SCM driver changes
  • From: Mukesh Ojha <quic_mojha@xxxxxxxxxxx>
• Re: [PATCH] scsi: ufs: qcom: move ufs_qcom_host_reset() to ufs_qcom_device_reset()
  • From: Ziqi Chen <quic_ziqichen@xxxxxxxxxxx>
• Re: [PATCH v3 1/3] dt-bindings: connector: usb: add altmodes description
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH 04/12] dt-bindings: display: msm: sm8450-mdss: Allow 3 interconnects
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH 03/12] dt-bindings: display: msm: qcm2290-mdss: Allow 2 interconnects
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v2 1/6] dt-bindings: iommu: Add Translation Buffer Unit bindings
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH V3 5/5] dt-bindings: interrupt-controller: qcom,pdc: document pdc on X1E80100
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH] dt-bindings: qcom,pdc: document the SM8650 Power Domain Controller
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v5] dt-bindings: interrupt-controller: Add SDX75 PDC compatible
  • From: Rob Herring <robh@xxxxxxxxxx>
• [PATCH 16/55] media: qcom: venus: Stop abusing of min_buffers_needed field
  • From: Benjamin Gaignard <benjamin.gaignard@xxxxxxxxxxxxx>
• Re: [PATCH v2 0/2] Add MHI Endpoint network driver
  • From: Jakub Kicinski <kuba@xxxxxxxxxx>
• Re: [PATCH 3/6] arm64: dts: qcom: sm8550: Add GPU nodes
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH 6/6] arm64: dts: qcom: sm8450-hdk: Enable the A730 GPU
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH 5/6] arm64: dts: qcom: sm8550-mtp: Enable the A740 GPU
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH 4/6] arm64: dts: qcom: sm8550-qrd: Enable the A740 GPU
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH 3/6] arm64: dts: qcom: sm8550: Add GPU nodes
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH 2/6] arm64: dts: qcom: sm8450: Add GPU nodes
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH 1/6] dt-bindings: arm-smmu: Document SM8[45]50 GPU SMMU
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH 0/6] SM8450 / SM8550 Adreno
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH v3 1/4] iommu/arm-smmu: introduction of ACTLR for custom prefetcher settings
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [RFC PATCH 03/10] drm/mipi-dsi: add API for manual control over the DSI link power state
  • From: Michael Walle <mwalle@xxxxxxxxxx>
• [PATCH v7 2/2] irqchip: irq-qcom-mpm: Support passing a slice of SRAM as reg space
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH v7 1/2] dt-bindings: interrupt-controller: mpm: Pass MSG RAM slice through phandle
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH v7 0/2] Resolve MPM register space situation
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH v3 3/4] iommu/arm-smmu: add ACTLR data and support for SC7280
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH v3 2/4] iommu/arm-smmu: add ACTLR data and support for SM8550
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH v3 1/4] iommu/arm-smmu: introduction of ACTLR for custom prefetcher settings
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH v2 12/12] arm64: dts: qcom: qrb2210-rb1: add wifi variant property
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH v2 11/12] arm64: dts: qcom: qrb2210-rb1: Enable CAN bus controller
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH v2 10/12] arm64: dts: qcom: qrb2210-rb1: Set up HDMI
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH v2 08/12] arm64: dts: qcom: qcm2290: Add display nodes
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH v2 09/12] arm64: dts: qcom: qcm2290: Hook up interconnects
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH v2 07/12] arm64: dts: qcom: sc7280: Add the missing MDSS icc path
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH v2 06/12] arm64: dts: qcom: sc7180: Add the missing MDSS icc path
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH v2 05/12] iommu/arm-smmu-qcom: Add QCM2290 DPU compatible
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH v2 04/12] dt-bindings: firmware: qcom,scm: Allow interconnect for everyone
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH v2 03/12] dt-bindings: interconnect: qcom,msm8998-bwmon: Add QCM2290 bwmon instance
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH v2 02/12] dt-bindings: display: msm: Add reg bus and rotator interconnects
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH v2 01/12] dt-bindings: display: msm: qcm2290-mdss: Use the non-deprecated DSI compat
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH v2 00/12] RB1/QCM2290 features
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH v2 1/2] dt-bindings: interconnect: Add Qualcomm SM6115 NoC
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH v3 4/4] iommu/arm-smmu: re-enable context caching in smmu reset operation
  • From: Bibek Kumar Patro <quic_bibekkum@xxxxxxxxxxx>
• [PATCH v3 3/4] iommu/arm-smmu: add ACTLR data and support for SC7280
  • From: Bibek Kumar Patro <quic_bibekkum@xxxxxxxxxxx>
• [PATCH v3 2/4] iommu/arm-smmu: add ACTLR data and support for SM8550
  • From: Bibek Kumar Patro <quic_bibekkum@xxxxxxxxxxx>
• [PATCH v3 1/4] iommu/arm-smmu: introduction of ACTLR for custom prefetcher settings
  • From: Bibek Kumar Patro <quic_bibekkum@xxxxxxxxxxx>
• [PATCH v3 0/4] iommu/arm-smmu: introduction of ACTLR implementation for Qualcomm SoCs
  • From: Bibek Kumar Patro <quic_bibekkum@xxxxxxxxxxx>
• Re: [PATCH 1/2] drm/sched: Rename priority MIN to LOW
  • From: Luben Tuikov <ltuikov89@xxxxxxxxx>
• Re: [PATCH 1/2] drm/sched: Rename priority MIN to LOW
  • From: Christian König <christian.koenig@xxxxxxx>
• Re: [PATCH v3] docs: dt-bindings: add DTS Coding Style document
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• [PATCH v6 13/13] arm64: defconfig: enable SHM Bridge support for the TZ memory allocator
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• [PATCH v6 12/13] firmware: qcom: scm: clarify the comment in qcom_scm_pas_init_image()
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• [PATCH v6 09/13] firmware: qcom: qseecom: convert to using the TZ allocator
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• [PATCH v6 11/13] firmware: qcom: tzmem: enable SHM Bridge support
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• [PATCH v6 10/13] firmware: qcom: scm: add support for SHM bridge operations
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• Re: [PATCH V3 0/2] interconnect: qcom: Introduce interconnect drivers for X1E80100
  • From: Georgi Djakov <djakov@xxxxxxxxxx>
• [PATCH v6 06/13] firmware: qcom: scm: make qcom_scm_ice_set_key() use the TZ allocator
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• [PATCH v6 07/13] firmware: qcom: scm: make qcom_scm_lmh_dcvsh() use the TZ allocator
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• [PATCH v6 08/13] firmware: qcom: scm: make qcom_scm_qseecom_app_get_id() use the TZ allocator
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• [PATCH v6 05/13] firmware: qcom: scm: make qcom_scm_assign_mem() use the TZ allocator
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• [PATCH v6 04/13] firmware: qcom: scm: smc: switch to using the SCM allocator
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• [PATCH v6 03/13] firmware: qcom: scm: enable the TZ mem allocator
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• [PATCH v6 02/13] firmware: qcom: add a dedicated TrustZone buffer allocator
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• [PATCH v6 01/13] firmware: qcom: qseecom: fix memory leaks in error paths
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• [PATCH v6 00/13] arm64: qcom: add and enable SHM Bridge support
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• Re: [PATCH v2 0/2] interconnect: qcom: Introduce support for SM8650
  • From: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
• Re: [PATCH 1/2] drm/sched: Rename priority MIN to LOW
  • From: Luben Tuikov <ltuikov89@xxxxxxxxx>
• Re: [PATCH v2 0/2] interconnect: qcom: Introduce support for SM8650
  • From: Georgi Djakov <djakov@xxxxxxxxxx>
• Re: [PATCH 1/2] drm/sched: Rename priority MIN to LOW
  • From: Christian König <christian.koenig@xxxxxxx>
• Re: [PATCH v5] phy: qcom-qmp-usb: Add Qualcomm SDX75 USB3 PHY support
  • From: Vinod Koul <vkoul@xxxxxxxxxx>
• Re: (subset) [PATCH v4 0/5] Add USB Support on Qualcomm's SDX75 Platform
  • From: Vinod Koul <vkoul@xxxxxxxxxx>
• [PATCH 9/9] bus: mhi: ep: Add checks for read/write callbacks while registering controllers
  • From: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
• [PATCH 8/9] bus: mhi: ep: Add support for async DMA read operation
  • From: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
• [PATCH 7/9] bus: mhi: ep: Add support for async DMA write operation
  • From: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
• [PATCH 6/9] PCI: epf-mhi: Enable MHI async read/write support
  • From: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
• [PATCH 5/9] PCI: epf-mhi: Add support for DMA async read/write operation
  • From: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
• [PATCH 4/9] PCI: epf-mhi: Simulate async read/write using iATU
  • From: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
• [PATCH 3/9] bus: mhi: ep: Introduce async read/write callbacks
  • From: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
• [PATCH 2/9] bus: mhi: ep: Rename read_from_host() and write_to_host() APIs
  • From: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
• [PATCH 1/9] bus: mhi: ep: Pass mhi_ep_buf_info struct to read/write APIs
  • From: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
• [PATCH 0/9] bus: mhi: ep: Add async read/write support
  • From: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
• Re: [PATCH v2 1/2] dt-bindings: interconnect: Add Qualcomm SM6115 NoC
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [PATCH v3 3/3] phy: qcom-qmp-pcie: Add support for keeping refclk always on
  • From: Krishna chaitanya chundru <quic_krichai@xxxxxxxxxxx>
• [PATCH v3 2/3] phy: qcom-qmp-pcie: Add endpoint refclk control register offset
  • From: Krishna chaitanya chundru <quic_krichai@xxxxxxxxxxx>
• [PATCH v3 1/3] dt-bindings: phy: qcom,qmp: Add PCIe qcom,refclk-always-on property
  • From: Krishna chaitanya chundru <quic_krichai@xxxxxxxxxxx>
• [PATCH v3 0/3] phy: qcom-qmp-pcie: Add support to keep refclk always on
  • From: Krishna chaitanya chundru <quic_krichai@xxxxxxxxxxx>
• Re: [PATCH v2 1/3] dt-bindings: phy: qcom,qmp: Add PCIe qcom,refclk-always-on property
  • From: Krishna Chaitanya Chundru <quic_krichai@xxxxxxxxxxx>
• Re: [Patch v6 10/12] pstore/ram: Add dynamic ramoops region support through commandline
  • From: Pavan Kondeti <quic_pkondeti@xxxxxxxxxxx>
• Re: [PATCH v6 8/8] media: qcom: camss: Add sm8250 named power-domain support
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH v2 2/2] arm64: dts: qcom: qrb4210-rb2: Enable bluetooth
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH v2 1/2] arm64: dts: qcom: sm6115: Add UART3
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH v2 0/2] RB2 bluetooth
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH 0/2] arm64: dts: qcom: enable IPA on sm8550
  • From: neil.armstrong@xxxxxxxxxx
• [PATCH v2 2/2] interconnect: qcom: Add SM6115 interconnect provider driver
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH v2 1/2] dt-bindings: interconnect: Add Qualcomm SM6115 NoC
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH v2 0/2] SM6115 interconnect
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH v5] bus: mhi: host: Add tracing support
  • From: Krishna chaitanya chundru <quic_krichai@xxxxxxxxxxx>
• Re: [PATCH v5 08/10] phy: qualcomm: phy-qcom-qmp-ufs: Rectify SM8550 UFS HS-G4 PHY Settings
  • From: Vinod Koul <vkoul@xxxxxxxxxx>
• Re: [PATCH v3 2/2] arm64: dts: qcom: sm8250-xiaomi-elish: Add pm8150b type-c node and enable usb otg
  • From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
• Re: [PATCH v6 2/3] clk: qcom: clk-rcg2: add support for rcg2 freq multi ops
  • From: Devi Priya <quic_devipriy@xxxxxxxxxxx>
• Re: [Patch v6 11/12] pstore/ram: Add ramoops ready notifier support
  • From: Pavan Kondeti <quic_pkondeti@xxxxxxxxxxx>
• Re: [PATCH net] net: stmmac: update Rx clk divider for 10M SGMII
  • From: "Russell King (Oracle)" <linux@xxxxxxxxxxxxxxx>
• Re: [PATCH net] net: stmmac: update Rx clk divider for 10M SGMII
  • From: Sneh Shah <quic_snehshah@xxxxxxxxxxx>
• Re: [PATCH 2/9] net: mdio: ipq4019: Enable the clocks for ipq5332 platform
  • From: Simon Horman <horms@xxxxxxxxxx>
• Re: [PATCH v4 0/8] arm64: dts: qcom: Introduce SM8650 platforms device tree
  • From: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
• Re: [PATCH net] net: stmmac: update Rx clk divider for 10M SGMII
  • From: "Russell King (Oracle)" <linux@xxxxxxxxxxxxxxx>
• Re: [PATCH 1/2] dt-bindings: interconnect: Add Qualcomm SM6115 NoC
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH V2 3/3] dt-bindings: iio/adc: Move QCOM ADC bindings to iio/adc folder
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: [PATCH v4 4/4] bus: mhi: host: Take irqsave lock after TRE is generated
  • From: Qiang Yu <quic_qianyu@xxxxxxxxxxx>
• Re: [PATCH v4 2/4] bus: mhi: host: Drop chan lock before queuing buffers
  • From: Qiang Yu <quic_qianyu@xxxxxxxxxxx>
• Re: [PATCH v4 2/4] bus: mhi: host: Drop chan lock before queuing buffers
  • From: Qiang Yu <quic_qianyu@xxxxxxxxxxx>
• Re: [PATCH 06/12] dt-bindings: firmware: qcom,scm: Allow interconnect for everyone
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH 05/12] dt-bindings: interconnect: qcom,msm8998-bwmon: Add QCM2290 bwmon instance
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH 03/12] dt-bindings: display: msm: qcm2290-mdss: Allow 2 interconnects
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH 02/12] dt-bindings: display: msm: Add reg bus and rotator interconnects
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH 01/12] dt-bindings: display: msm: qcm2290-mdss: Use the non-deprecated DSI compat
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v2 0/2] Add MHI Endpoint network driver
  • From: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
• Re: [PATCH v6 5/6] arm64: dts: qcom: sm4450-qrd: mark QRD4450 reserved gpios
  • From: Tengfei Fan <quic_tengfan@xxxxxxxxxxx>
• Re: [PATCH net] net: stmmac: update Rx clk divider for 10M SGMII
  • From: Sneh Shah <quic_snehshah@xxxxxxxxxxx>
• Re: [Patch v6 03/12] docs: qcom: Add qualcomm minidump guide
  • From: Bagas Sanjaya <bagasdotme@xxxxxxxxx>
• Re: [PATCH v3 0/3] cpufreq: qcom-nvmem: Fix power domain scaling
  • From: Viresh Kumar <viresh.kumar@xxxxxxxxxx>
• Re: [PATCH] arm64: dts: qcom: Fix the warnings from coresight bindings
  • From: Jinlong Mao <quic_jinlmao@xxxxxxxxxxx>
• [PATCH v2] arm64: dts: qcom: msm8939-longcheer-l9100: Add proximity-near-level
  • From: André Apitzsch <git@xxxxxxxxxxx>
• Re: [PATCH v2 20/21] pinctrl: starfive: Convert to use grp member
  • From: Emil Renner Berthing <emil.renner.berthing@xxxxxxxxxxxxx>
• Re: [PATCH v3] docs: dt-bindings: add DTS Coding Style document
  • From: Andrew Lunn <andrew@xxxxxxx>
• Re: [PATCH v3] docs: dt-bindings: add DTS Coding Style document
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• Re: [PATCH 01/12] dt-bindings: display: msm: qcm2290-mdss: Use the non-deprecated DSI compat
  • From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
• Re: [PATCH V2 3/3] dt-bindings: iio/adc: Move QCOM ADC bindings to iio/adc folder
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v3] docs: dt-bindings: add DTS Coding Style document
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v3] docs: dt-bindings: add DTS Coding Style document
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v3] docs: dt-bindings: add DTS Coding Style document
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [PATCH v3 2/2] arm64: dts: qcom: sm8250-xiaomi-elish: Add pm8150b type-c node and enable usb otg
  • From: Jianhua Lu <lujianhua000@xxxxxxxxx>
• [PATCH v3 1/2] arm64: dts: qcom: sm8250-xiaomi-elish: Fix typos
  • From: Jianhua Lu <lujianhua000@xxxxxxxxx>
• [net-next PATCH RFC v3 7/8] net: phy: add Qualcom QCA807x driver
  • From: Christian Marangi <ansuelsmth@xxxxxxxxx>
• [net-next PATCH RFC v3 8/8] net: phy: qca807x: Add support for configurable LED
  • From: Christian Marangi <ansuelsmth@xxxxxxxxx>
• [net-next PATCH RFC v3 6/8] dt-bindings: net: Document Qcom QCA807x PHY package
  • From: Christian Marangi <ansuelsmth@xxxxxxxxx>
• [net-next PATCH RFC v3 5/8] dt-bindings: net: add QCA807x PHY defines
  • From: Christian Marangi <ansuelsmth@xxxxxxxxx>
• [net-next PATCH RFC v3 4/8] net: phy: add support for driver specific PHY package probe/config
  • From: Christian Marangi <ansuelsmth@xxxxxxxxx>
• [net-next PATCH RFC v3 3/8] net: phy: add support for shared priv data size for PHY package in DT
  • From: Christian Marangi <ansuelsmth@xxxxxxxxx>
• [net-next PATCH RFC v3 2/8] net: phy: add initial support for PHY package in DT
  • From: Christian Marangi <ansuelsmth@xxxxxxxxx>
• [net-next PATCH RFC v3 1/8] dt-bindings: net: document ethernet PHY package nodes
  • From: Christian Marangi <ansuelsmth@xxxxxxxxx>
• [net-next PATCH RFC v3 0/8] net: phy: Support DT PHY package
  • From: Christian Marangi <ansuelsmth@xxxxxxxxx>
• Re: [PATCH v3] docs: dt-bindings: add DTS Coding Style document
  • From: Konrad Dybcio <konradybcio@xxxxxxxxxx>
• Re: [PATCH v3] docs: dt-bindings: add DTS Coding Style document
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH v2 2/2] drm/msm/a690: Fix reg values for a690
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH v2 1/2] drm/msm/a6xx: Add missing BIT(7) to REG_A6XX_UCHE_CLIENT_PF
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH 2/2] interconnect: qcom: Add SM6115 interconnect provider driver
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH v11 2/2] arm64: dts: qcom: sm8250-xiaomi-pipa: Add initial device tree
  • From: Luka Panio <lukapanio@xxxxxxxxx>
• [PATCH v11 1/2] dt-bindings: arm: qcom: Add Xiaomi Pad 6 (xiaomi-pipa)
  • From: Luka Panio <lukapanio@xxxxxxxxx>
• Re: [PATCH v4 1/6] dt-bindings: iio: adc: qcom: Add Qualcomm smb139x
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v4 1/6] dt-bindings: iio: adc: qcom: Add Qualcomm smb139x
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3] docs: dt-bindings: add DTS Coding Style document
  • From: Andrew Lunn <andrew@xxxxxxx>
• Re: [PATCH v3] docs: dt-bindings: add DTS Coding Style document
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• Re: [PATCH V2 0/3] iio: adc: Add support for QCOM SPMI PMIC5 Gen3 ADC
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH V2 3/3] dt-bindings: iio/adc: Move QCOM ADC bindings to iio/adc folder
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3] docs: dt-bindings: add DTS Coding Style document
  • From: Jonathan Corbet <corbet@xxxxxxx>
• [PATCH v2 2/2] drm/msm/a690: Fix reg values for a690
  • From: Rob Clark <robdclark@xxxxxxxxx>
• [PATCH v2 1/2] drm/msm/a6xx: Add missing BIT(7) to REG_A6XX_UCHE_CLIENT_PF
  • From: Rob Clark <robdclark@xxxxxxxxx>
• Re: [net-next RFC PATCH v2 01/11] net: phy: extend PHY package API to support multiple global address
  • From: Andrew Lunn <andrew@xxxxxxx>
• Re: [PATCH v2] docs: dt-bindings: add DTS Coding Style document
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [PATCH v3] docs: dt-bindings: add DTS Coding Style document
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [net-next RFC PATCH v2 02/11] dt-bindings: net: document ethernet PHY package nodes
  • From: Andrew Lunn <andrew@xxxxxxx>
• Re: [net-next RFC PATCH v2 01/11] net: phy: extend PHY package API to support multiple global address
  • From: Christian Marangi <ansuelsmth@xxxxxxxxx>
• Re: [net-next RFC PATCH v2 01/11] net: phy: extend PHY package API to support multiple global address
  • From: Andrew Lunn <andrew@xxxxxxx>
• Re: [net-next RFC PATCH v2 00/11] net: phy: Support DT PHY package
  • From: Christian Marangi <ansuelsmth@xxxxxxxxx>
• Re: [net-next RFC PATCH v2 00/11] net: phy: Support DT PHY package
  • From: Andrew Lunn <andrew@xxxxxxx>
• [PATCH 2/2] interconnect: qcom: Add SM6115 interconnect provider driver
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH 0/2] SM6115 interconnect
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH 1/2] dt-bindings: interconnect: Add Qualcomm SM6115 NoC
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH v6 2/2] irqchip: irq-qcom-mpm: Support passing a slice of SRAM as reg space
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH 2/2] arm64: dts: qcom: qrb4210-rb2: Enable bluetooth
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH v6 2/2] irqchip: irq-qcom-mpm: Support passing a slice of SRAM as reg space
  • From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
• Re: [PATCH 2/2] arm64: dts: qcom: qrb4210-rb2: Enable bluetooth
  • From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
• Re: [PATCH 1/2] arm64: dts: qcom: sm6115: Add UART3
  • From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
• [PATCH v6 2/2] irqchip: irq-qcom-mpm: Support passing a slice of SRAM as reg space
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH v6 1/2] dt-bindings: interrupt-controller: mpm: Pass MSG RAM slice through phandle
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH v6 0/2] Resolve MPM register space situation
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH 12/12] arm64: dts: qcom: qrb2210-rb1: add wifi variant property
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH 11/12] arm64: dts: qcom: qrb2210-rb1: Enable CAN bus controller
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH 10/12] arm64: dts: qcom: qrb2210-rb1: Set up HDMI
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH 09/12] arm64: dts: qcom: qcm2290: Hook up interconnects
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH 08/12] arm64: dts: qcom: qcm2290: Add display nodes
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH 07/12] iommu/arm-smmu-qcom: Add QCM2290 DPU compatible
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH 06/12] dt-bindings: firmware: qcom,scm: Allow interconnect for everyone
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH 05/12] dt-bindings: interconnect: qcom,msm8998-bwmon: Add QCM2290 bwmon instance
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH 04/12] dt-bindings: display: msm: sm8450-mdss: Allow 3 interconnects
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH 03/12] dt-bindings: display: msm: qcm2290-mdss: Allow 2 interconnects
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH 02/12] dt-bindings: display: msm: Add reg bus and rotator interconnects
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH 01/12] dt-bindings: display: msm: qcm2290-mdss: Use the non-deprecated DSI compat
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH 00/12] RB1/QCM2290 features
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH 2/2] arm64: dts: qcom: qrb4210-rb2: Enable bluetooth
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH 0/2] RB2 bluetooth
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH 1/2] arm64: dts: qcom: sm6115: Add UART3
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH v4 8/8] arm64: dts: qcom: sm8650-qrd: add interconnect dependent device nodes
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH v4 7/8] arm64: dts: qcom: sm8650-mtp: add interconnect dependent device nodes
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH v6 4/8] media: qcom: camss: Move VFE power-domain specifics into vfe.c
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH v6 4/8] media: qcom: camss: Move VFE power-domain specifics into vfe.c
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH v6 7/8] media: qcom: camss: Flag CSID-lites to support more CSIDs
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH 1/4] dt-bindings: remoteproc: qcom: wcnss: Add WCN3680B compatible
  • From: Luca Weiss <luca@xxxxxxxxx>
• [PATCH v2 1/2] arm64: dts: qcom: msm8953: Set initial address for memory
  • From: Luca Weiss <luca@xxxxxxxxx>
• [PATCH v2 2/2] arm64: dts: qcom: msm8953: Use non-deprecated qcom,domain in LPASS
  • From: Luca Weiss <luca@xxxxxxxxx>
• [PATCH v2 0/2] Small dtsi fixes for msm8953 SoC
  • From: Luca Weiss <luca@xxxxxxxxx>
• Re: [PATCH v2 3/3] arm64: dts: qcom: sm8250-xiaomi-elish: Enable usb_1 otg
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH v2 2/3] arm64: dts: qcom: sm8250-xiaomi-elish: Add pm8150b type-c node
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH v2 1/3] arm64: dts: qcom: sm8250-xiaomi-elish: Fix typos
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH v10 1/2] Add a compatible for Xiaomi Pad 6.
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH 5/5] ASoC: codecs: Add WCD939x Codec driver
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH] iommu/qcom: restore IOMMU state if needed
  • From: Luca Weiss <luca@xxxxxxxxx>
• [PATCH v3 1/3] dt-bindings: vendor-prefixes: document HTC Corporation
  • From: Luca Weiss <luca@xxxxxxxxx>
• [PATCH v3 2/3] dt-bindings: arm: qcom: Add HTC One Mini 2
  • From: Luca Weiss <luca@xxxxxxxxx>
• [PATCH v3 3/3] ARM: dts: qcom: Add support for HTC One Mini 2
  • From: Luca Weiss <luca@xxxxxxxxx>
• [PATCH v3 0/3] Add support for HTC One Mini 2 smartphone
  • From: Luca Weiss <luca@xxxxxxxxx>
• Re: [PATCH 4/5] ASoC: codecs: Add WCD939x Soundwire slave driver
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH 2/2] arm64: dts: qcom: minor whitespace cleanup around '='
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH 1/2] ARM: dts: qcom: minor whitespace cleanup around '='
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH v4 6/6] arm64: dts: qcom: sm8350-lemonade(p): New devices
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH] clk: qcom: gpucc-sm8150: Update the gpu_cc_pll1 config
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH] ASoC: dt-bindings: correct white-spaces in examples
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH v10 1/2] Add a compatible for Xiaomi Pad 6.
  • From: Conor Dooley <conor@xxxxxxxxxx>
• Re: [PATCH v10 2/2] Initial support for Xiaomi Pad 6 tablet, that have sm8250 soc.
  • From: Greg KH <greg@xxxxxxxxx>
• Re: [PATCH v10 1/2] Add a compatible for Xiaomi Pad 6.
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v7 5/5] misc: fastrpc: Add support to allocate shared context bank
  • From: Dan Carpenter <dan.carpenter@xxxxxxxxxx>
• Re: [PATCH 2/2] drm/sched: Reverse run-queue priority enumeration
  • From: Luben Tuikov <ltuikov89@xxxxxxxxx>
• ath10k / WCN3990: firmware-5.bin and wlanmdsp.mbn being out of sync
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [linux-next:master] BUILD REGRESSION 8c9660f6515396aba78d1168d2e17951d653ebf2
  • From: kernel test robot <lkp@xxxxxxxxx>
• [PATCH v2 3/3] arm64: dts: qcom: sm8250-xiaomi-elish: Enable usb_1 otg
  • From: Jianhua Lu <lujianhua000@xxxxxxxxx>
• [PATCH v2 2/3] arm64: dts: qcom: sm8250-xiaomi-elish: Add pm8150b type-c node
  • From: Jianhua Lu <lujianhua000@xxxxxxxxx>
• [PATCH v2 1/3] arm64: dts: qcom: sm8250-xiaomi-elish: Fix typos
  • From: Jianhua Lu <lujianhua000@xxxxxxxxx>
• Re: [PATCH 2/3] arm64: dts: qcom: sm8250-xiaomi-elish: Sort ufs node
  • From: Jianhua Lu <lujianhua000@xxxxxxxxx>
• [net-next RFC PATCH v2 11/11] net: phy: qca807x: Add support for configurable LED
  • From: Christian Marangi <ansuelsmth@xxxxxxxxx>
• [net-next RFC PATCH v2 10/11] net: phy: add Qualcom QCA807x driver
  • From: Christian Marangi <ansuelsmth@xxxxxxxxx>
• [net-next RFC PATCH v2 09/11] dt-bindings: net: Document Qcom QCA807x PHY package
  • From: Christian Marangi <ansuelsmth@xxxxxxxxx>
• [net-next RFC PATCH v2 08/11] dt-bindings: net: add QCA807x PHY defines
  • From: Christian Marangi <ansuelsmth@xxxxxxxxx>
• [net-next RFC PATCH v2 07/11] net: phy: add support for PHY package MMD read/write
  • From: Christian Marangi <ansuelsmth@xxxxxxxxx>
• [net-next RFC PATCH v2 06/11] net: phy: move mmd_phy_indirect to generic header
  • From: Christian Marangi <ansuelsmth@xxxxxxxxx>
• [net-next RFC PATCH v2 04/11] net: phy: add support for shared priv data size for PHY package in DT
  • From: Christian Marangi <ansuelsmth@xxxxxxxxx>
• [net-next RFC PATCH v2 05/11] net: phy: add support for driver specific PHY package probe/config
  • From: Christian Marangi <ansuelsmth@xxxxxxxxx>
• [net-next RFC PATCH v2 03/11] net: phy: add initial support for PHY package in DT
  • From: Christian Marangi <ansuelsmth@xxxxxxxxx>
• [net-next RFC PATCH v2 01/11] net: phy: extend PHY package API to support multiple global address
  • From: Christian Marangi <ansuelsmth@xxxxxxxxx>
• [net-next RFC PATCH v2 02/11] dt-bindings: net: document ethernet PHY package nodes
  • From: Christian Marangi <ansuelsmth@xxxxxxxxx>
• [net-next RFC PATCH v2 00/11] net: phy: Support DT PHY package
  • From: Christian Marangi <ansuelsmth@xxxxxxxxx>
• Re: [PATCH v2 12/21] pinctrl: core: Embed struct pingroup into struct group_desc
  • From: kernel test robot <lkp@xxxxxxxxx>
• [Patch v6 08/12] soc: qcom: Add Qualcomm APSS minidump kernel driver
  • From: Mukesh Ojha <quic_mojha@xxxxxxxxxxx>
• [Patch v6 12/12] soc: qcom: register ramoops region with APSS minidump
  • From: Mukesh Ojha <quic_mojha@xxxxxxxxxxx>
• [Patch v6 11/12] pstore/ram: Add ramoops ready notifier support
  • From: Mukesh Ojha <quic_mojha@xxxxxxxxxxx>
• [Patch v6 09/12] MAINTAINERS: Add entry for minidump related files
  • From: Mukesh Ojha <quic_mojha@xxxxxxxxxxx>
• [Patch v6 10/12] pstore/ram: Add dynamic ramoops region support through commandline
  • From: Mukesh Ojha <quic_mojha@xxxxxxxxxxx>
• [Patch v6 06/12] remoteproc: qcom: Remove minidump related data from qcom_common.c
  • From: Mukesh Ojha <quic_mojha@xxxxxxxxxxx>
• [Patch v6 07/12] init: export linux_banner data variable
  • From: Mukesh Ojha <quic_mojha@xxxxxxxxxxx>
• [Patch v6 05/12] remoteproc: qcom_q6v5_pas: Use qcom_rproc_minidump()
  • From: Mukesh Ojha <quic_mojha@xxxxxxxxxxx>
• [Patch v6 03/12] docs: qcom: Add qualcomm minidump guide
  • From: Mukesh Ojha <quic_mojha@xxxxxxxxxxx>
• [Patch v6 02/12] firmware/qcom: qcom_scm: Add multiple download mode support
  • From: Mukesh Ojha <quic_mojha@xxxxxxxxxxx>
• [Patch v6 04/12] soc: qcom: Add qcom_rproc_minidump module
  • From: Mukesh Ojha <quic_mojha@xxxxxxxxxxx>
• [Patch v6 00/12] Add Qualcomm Minidump driver related support
  • From: Mukesh Ojha <quic_mojha@xxxxxxxxxxx>
• [Patch v6 01/12] firmware: qcom_scm: Refactor code to support multiple dload mode
  • From: Mukesh Ojha <quic_mojha@xxxxxxxxxxx>
• Re: [PATCH v6 3/3] arm64: dts: qcom: Add base qcs6490-rb3gen2 board dts
  • From: Caleb Connolly <caleb.connolly@xxxxxxxxxx>
• Re: [PATCH v6 2/3] arm64: dts: qcom: Add base qcm6490 idp board dts
  • From: Caleb Connolly <caleb.connolly@xxxxxxxxxx>
• [PATCH v10 2/2] Initial support for Xiaomi Pad 6 tablet, that have sm8250 soc.
  • From: Luka Panio <lukapanio@xxxxxxxxx>
• [PATCH v10 1/2] Add a compatible for Xiaomi Pad 6.
  • From: Luka Panio <lukapanio@xxxxxxxxx>
• Re: [net-next RFC PATCH 03/14] dt-bindings: net: document ethernet PHY package nodes
  • From: Vladimir Oltean <olteanv@xxxxxxxxx>
• [PATCH 5.15 026/297] drm/msm/dp: skip validity check for DP CTS EDID checksum
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• [PATCH 5.10 018/193] drm/msm/dp: skip validity check for DP CTS EDID checksum
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] remoteproc: qcom: Add NOTIFY_FATAL event type to SSR subdevice
  • From: Vignesh Viswanathan <quic_viswanat@xxxxxxxxxxx>
• [PATCH] remoteproc: qcom: q6v5: Get crash reason from specific SMEM partition
  • From: Vignesh Viswanathan <quic_viswanat@xxxxxxxxxxx>
• [PATCH 6.1 042/372] drm/msm/dp: skip validity check for DP CTS EDID checksum
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [net-next RFC PATCH 03/14] dt-bindings: net: document ethernet PHY package nodes
  • From: Andrew Lunn <andrew@xxxxxxx>
• Re: [net-next RFC PATCH 03/14] dt-bindings: net: document ethernet PHY package nodes
  • From: Vladimir Oltean <olteanv@xxxxxxxxx>
• [PATCH 6.5 062/491] drm/msm/dp: skip validity check for DP CTS EDID checksum
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• [PATCH 2/2] arm64: dts: qcom: sm8550-qrd: enable IPA
  • From: Alex Elder <elder@xxxxxxxxxx>
• [PATCH 1/2] arm64: dts: qcom: sm8550: add IPA information
  • From: Alex Elder <elder@xxxxxxxxxx>
• [PATCH 0/2] arm64: dts: qcom: enable IPA on sm8550
  • From: Alex Elder <elder@xxxxxxxxxx>
• [PATCH 6.6 064/530] drm/msm/dp: skip validity check for DP CTS EDID checksum
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 1/6] dt-bindings: usb: dwc3: Clean up hs_phy_irq in bindings
  • From: Krishna Kurapati PSSNV <quic_kriskura@xxxxxxxxxxx>
• Re: [net-next RFC PATCH 03/14] dt-bindings: net: document ethernet PHY package nodes
  • From: Christian Marangi <ansuelsmth@xxxxxxxxx>
• Re: [net-next RFC PATCH 03/14] dt-bindings: net: document ethernet PHY package nodes
  • From: Robert Marko <robert.marko@xxxxxxxxxx>
• Re: [net-next RFC PATCH 03/14] dt-bindings: net: document ethernet PHY package nodes
  • From: Vladimir Oltean <olteanv@xxxxxxxxx>
• Re: [PATCH v2 2/3] arm64: dts: qcom: sc7280: Move video-firmware to chrome-common
  • From: "Luca Weiss" <luca.weiss@xxxxxxxxxxxxx>
• Re: [PATCH 2/3] arm64: dts: qcom: sm8250-xiaomi-elish: Sort ufs node
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [RESEND PATCH v5 02/12] firmware: qcom: scm: enable the TZ mem allocator
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [PATCH net-next v3 2/3] arm64: dts: qcom: sa8775p: enable Fault IRQ
  • From: kernel test robot <lkp@xxxxxxxxx>
• [PATCH v7 3/3] clk: qcom: gcc-ipq8074: rework nss_port5/6 clock to multiple conf
  • From: Christian Marangi <ansuelsmth@xxxxxxxxx>
• [PATCH v7 2/3] clk: qcom: clk-rcg2: add support for rcg2 freq multi ops
  • From: Christian Marangi <ansuelsmth@xxxxxxxxx>
• [PATCH v7 1/3] clk: qcom: clk-rcg: introduce support for multiple conf for same freq
  • From: Christian Marangi <ansuelsmth@xxxxxxxxx>
• [PATCH v7 0/3] clk: qcom: clk-rcg2: introduce support for multiple conf for same freq
  • From: Christian Marangi <ansuelsmth@xxxxxxxxx>
• Re: [net-next RFC PATCH 03/14] dt-bindings: net: document ethernet PHY package nodes
  • From: "Russell King (Oracle)" <linux@xxxxxxxxxxxxxxx>
• Re: [PATCH v2 00/21] pinctrl: Convert struct group_desc to use struct pingroup
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [net-next RFC PATCH 03/14] dt-bindings: net: document ethernet PHY package nodes
  • From: Andrew Lunn <andrew@xxxxxxx>
• Re: [PATCH net-next v3 3/3] net: stmmac: Add driver support for DWMAC5 fault IRQ Support
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [PATCH v2 06/21] pinctrl: equilibrium: Convert to use struct pingroup
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH 3/3] arm64: dts: qcom: sm8250-xiaomi-elish: Add pm8150b type-c node
  • From: Jianhua Lu <lujianhua000@xxxxxxxxx>
• [PATCH 2/3] arm64: dts: qcom: sm8250-xiaomi-elish: Sort ufs node
  • From: Jianhua Lu <lujianhua000@xxxxxxxxx>
• [PATCH 1/3] arm64: dts: qcom: sm8250-xiaomi-elish: Fix typos
  • From: Jianhua Lu <lujianhua000@xxxxxxxxx>
• Re: [PATCH 1/6] dt-bindings: usb: dwc3: Clean up hs_phy_irq in bindings
  • From: Johan Hovold <johan@xxxxxxxxxx>
• Re: [PATCH v2 2/3] arm64: dts: qcom: sc7280: Move video-firmware to chrome-common
  • From: Vikash Garodia <quic_vgarodia@xxxxxxxxxxx>
• Re: [PATCH v2] dt-bindings: dma: qcom,gpi: document the SM8650 GPI DMA Engine
  • From: Vinod Koul <vkoul@xxxxxxxxxx>
• Re: (subset) [PATCH V3 0/5] dt-bindings: Document gpi/pdc/scm/smmu for X1E80100
  • From: Vinod Koul <vkoul@xxxxxxxxxx>
• Re: [PATCH v3 1/5] misc: fastrpc: Add early wakeup support for fastRPC driver
  • From: Srinivas Kandagatla <srinivas.kandagatla@xxxxxxxxxx>
• Re: [PATCH v7 2/5] misc: fastrpc: Add CRC support for remote buffers
  • From: Srinivas Kandagatla <srinivas.kandagatla@xxxxxxxxxx>
• Re: [PATCH v7 3/5] misc: fastrpc: Capture kernel and DSP performance counters
  • From: Srinivas Kandagatla <srinivas.kandagatla@xxxxxxxxxx>
• Re: [PATCH v7 5/5] misc: fastrpc: Add support to allocate shared context bank
  • From: Srinivas Kandagatla <srinivas.kandagatla@xxxxxxxxxx>
• Re: [PATCH v2 06/21] pinctrl: equilibrium: Convert to use struct pingroup
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [PATCH v2 7/9] clk: qcom: add NSS clock Controller driver for Qualcomm IPQ5332
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [PATCH net-next v3 3/3] net: stmmac: Add driver support for DWMAC5 fault IRQ Support
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [PATCH v6 3/3] arm64: dts: qcom: Add base qcs6490-rb3gen2 board dts
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v6 2/3] arm64: dts: qcom: Add base qcm6490 idp board dts
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v2 2/3] arm64: dts: qcom: sc7280: Move video-firmware to chrome-common
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v6 0/6] drm: simplify support for transparent DRM bridges
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v2 2/3] arm64: dts: qcom: sc7280: Move video-firmware to chrome-common
  • From: Vikash Garodia <quic_vgarodia@xxxxxxxxxxx>
• Re: [PATCH v6 0/6] drm: simplify support for transparent DRM bridges
  • From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
• Re: [PATCH net-next 0/5] net: ipa: add IPA v5.5 support
  • From: patchwork-bot+netdevbpf@xxxxxxxxxx
• [PATCH v6 3/3] arm64: dts: qcom: Add base qcs6490-rb3gen2 board dts
  • From: Komal Bajaj <quic_kbajaj@xxxxxxxxxxx>
• [PATCH v6 1/3] dt-bindings: arm: qcom: Add QCM6490 IDP and QCS6490 RB3Gen2 board
  • From: Komal Bajaj <quic_kbajaj@xxxxxxxxxxx>
• [PATCH v6 2/3] arm64: dts: qcom: Add base qcm6490 idp board dts
  • From: Komal Bajaj <quic_kbajaj@xxxxxxxxxxx>
• [PATCH v6 0/3] Add support for qcm6490 idp and qcs6490 rb3gen2 board
  • From: Komal Bajaj <quic_kbajaj@xxxxxxxxxxx>
• Re: [PATCH 1/6] dt-bindings: usb: dwc3: Clean up hs_phy_irq in bindings
  • From: Krishna Kurapati PSSNV <quic_kriskura@xxxxxxxxxxx>
• Re: [net-next RFC PATCH 03/14] dt-bindings: net: document ethernet PHY package nodes
  • From: "Russell King (Oracle)" <linux@xxxxxxxxxxxxxxx>
• Re: [net-next RFC PATCH 03/14] dt-bindings: net: document ethernet PHY package nodes
  • From: Jie Luo <quic_luoj@xxxxxxxxxxx>
• Re: [PATCH net-next v3 1/3] dt-bindings: net: qcom,ethqos: add binding doc for fault IRQ for sa8775p
  • From: Suraj Jaiswal <quic_jsuraj@xxxxxxxxxxx>
• Re: [PATCH v2 2/3] arm64: dts: qcom: sc7280: Move video-firmware to chrome-common
  • From: "Luca Weiss" <luca.weiss@xxxxxxxxxxxxx>
• Re: [PATCH V2 4/4] clk: qcom: videocc-sm8150: Add runtime PM support
  • From: "Satya Priya Kakitapalli (Temp)" <quic_skakitap@xxxxxxxxxxx>
• Re: [PATCH] clk: qcom: gpucc-sm8150: Update the gpu_cc_pll1 config
  • From: "Satya Priya Kakitapalli (Temp)" <quic_skakitap@xxxxxxxxxxx>
• Re: [PATCH v13 05/10] usb: dwc3: qcom: Refactor IRQ handling in QCOM Glue driver
  • From: Johan Hovold <johan@xxxxxxxxxx>
• Re: [PATCH v2 16/21] pinctrl: ingenic: Convert to use grp member
  • From: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
• Re: [PATCH v12 0/4] add clock controller of qca8386/qca8084
  • From: Jie Luo <quic_luoj@xxxxxxxxxxx>
• Re: [PATCH v13 05/10] usb: dwc3: qcom: Refactor IRQ handling in QCOM Glue driver
  • From: Krishna Kurapati PSSNV <quic_kriskura@xxxxxxxxxxx>
• Re: [PATCH 5/5] ASoC: codecs: Add WCD939x Codec driver
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH V3 5/5] dt-bindings: interrupt-controller: qcom,pdc: document pdc on X1E80100
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH V3 1/5] dt-bindings: arm: qcom-soc: extend pattern matching for X1E80100 SoC
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v2 00/21] pinctrl: Convert struct group_desc to use struct pingroup
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH v13 05/10] usb: dwc3: qcom: Refactor IRQ handling in QCOM Glue driver
  • From: Johan Hovold <johan@xxxxxxxxxx>
• Re: [PATCH 01/16] dt-bindings: arm: qcom: add SM8550 AIM300
  • From: Tengfei Fan <quic_tengfan@xxxxxxxxxxx>
• [PATCH V3 5/5] dt-bindings: interrupt-controller: qcom,pdc: document pdc on X1E80100
  • From: Sibi Sankar <quic_sibis@xxxxxxxxxxx>
• [PATCH V3 3/5] dt-bindings: dma: qcom: gpi: add compatible for X1E80100
  • From: Sibi Sankar <quic_sibis@xxxxxxxxxxx>
• [PATCH V3 1/5] dt-bindings: arm: qcom-soc: extend pattern matching for X1E80100 SoC
  • From: Sibi Sankar <quic_sibis@xxxxxxxxxxx>
• [PATCH V3 4/5] dt-bindings: firmware: qcom,scm: document SCM on X1E80100 SoCs
  • From: Sibi Sankar <quic_sibis@xxxxxxxxxxx>
• Re: [PATCH v4 4/4] bus: mhi: host: Take irqsave lock after TRE is generated
  • From: Manivannan Sadhasivam <mani@xxxxxxxxxx>
• [PATCH V3 2/5] dt-bindings: arm-smmu: Add compatible for X1E80100 SoC
  • From: Sibi Sankar <quic_sibis@xxxxxxxxxxx>
• [PATCH V3 0/5] dt-bindings: Document gpi/pdc/scm/smmu for X1E80100
  • From: Sibi Sankar <quic_sibis@xxxxxxxxxxx>
• Re: [PATCH v4 2/4] bus: mhi: host: Drop chan lock before queuing buffers
  • From: Manivannan Sadhasivam <mani@xxxxxxxxxx>
• [PATCH 2/2] arm64: dts: qcom: minor whitespace cleanup around '='
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [PATCH 1/2] ARM: dts: qcom: minor whitespace cleanup around '='
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH V2 0/2] pinctrl: qcom: Introduce Pinctrl/GPIO for X1E80100
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH 2/2] drm/sched: Reverse run-queue priority enumeration
  • From: Christian König <christian.koenig@xxxxxxx>
• Re: [PATCH v2 2/2] usb: typec: tcpm: Parse Accessory Mode information
  • From: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
• [PATCH v4 6/8] arm64: dts: qcom: sm8650: add interconnect dependent device nodes
  • From: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
• [PATCH v4 2/8] arm64: dts: qcom: add initial SM8650 dtsi
  • From: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
• [PATCH v4 5/8] arm64: dts: qcom: sm8650: add initial SM8650 QRD dts
  • From: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
• [PATCH v4 7/8] arm64: dts: qcom: sm8650-mtp: add interconnect dependent device nodes
  • From: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
• [PATCH v4 8/8] arm64: dts: qcom: sm8650-qrd: add interconnect dependent device nodes
  • From: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
• [PATCH v4 4/8] arm64: dts: qcom: sm8650: add initial SM8650 MTP dts
  • From: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
• [PATCH v4 3/8] arm64: dts: qcom: pm8550ve: make PMK8550VE SID configurable
  • From: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
• [PATCH v4 1/8] dt-bindings: arm: qcom: document SM8650 and the reference boards
  • From: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
• [PATCH v4 0/8] arm64: dts: qcom: Introduce SM8650 platforms device tree
  • From: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
• Re: [PATCH v13 05/10] usb: dwc3: qcom: Refactor IRQ handling in QCOM Glue driver
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH net] net: stmmac: update Rx clk divider for 10M SGMII
  • From: "Russell King (Oracle)" <linux@xxxxxxxxxxxxxxx>
• Re: [PATCH v13 05/10] usb: dwc3: qcom: Refactor IRQ handling in QCOM Glue driver
  • From: Krishna Kurapati PSSNV <quic_kriskura@xxxxxxxxxxx>
• [PATCH] ASoC: dt-bindings: correct white-spaces in examples
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH 2/5] ASoC: dt-bindings: document WCD939x Audio Codec
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH 1/5] ASoC: dt-bindings: qcom,wcd938x: move out common properties
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH 2/2] drm/sched: Reverse run-queue priority enumeration
  • From: Luben Tuikov <ltuikov89@xxxxxxxxx>
• Re: [PATCH net-next v3 2/3] arm64: dts: qcom: sa8775p: enable Fault IRQ
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH net-next v3 2/3] arm64: dts: qcom: sa8775p: enable Fault IRQ
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH net-next v3 1/3] dt-bindings: net: qcom,ethqos: add binding doc for fault IRQ for sa8775p
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [PATCH 0/9] pmdomain: Convert to platform remove callback returning void
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• [PATCH 8/9] pmdomain: qcom-cpr: Convert to platform remove callback returning void
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• Re: [PATCH 2/2] drm/sched: Reverse run-queue priority enumeration
  • From: Christian König <christian.koenig@xxxxxxx>
• Re: [PATCH 1/2] drm/sched: Rename priority MIN to LOW
  • From: Christian König <christian.koenig@xxxxxxx>
• Re: [PATCH] arm64: dts: qcom: Fix the warnings from coresight bindings
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [PATCH] power: supply: Fix null pointer dereference in smb2_probe
  • From: Kunwu Chan <chentao@xxxxxxxxxx>
• Re: [PATCH 01/16] dt-bindings: arm: qcom: add SM8550 AIM300
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v5 9/9] drm: ci: Update xfails
  • From: Vignesh Raman <vignesh.raman@xxxxxxxxxxxxx>
• RE: [EXT] [PATCH net] net: stmmac: update Rx clk divider for 10M SGMII
  • From: Suman Ghosh <sumang@xxxxxxxxxxx>
• Re: [PATCH v2 2/3] arm64: dts: qcom: sc7280: Move video-firmware to chrome-common
  • From: Vikash Garodia <quic_vgarodia@xxxxxxxxxxx>
• [PATCH] arm64: dts: qcom: Fix the warnings from coresight bindings
  • From: Mao Jinlong <quic_jinlmao@xxxxxxxxxxx>
• [PATCH 2/2] drm/sched: Reverse run-queue priority enumeration
  • From: Luben Tuikov <ltuikov89@xxxxxxxxx>
• [PATCH 1/2] drm/sched: Rename priority MIN to LOW
  • From: Luben Tuikov <ltuikov89@xxxxxxxxx>
• [PATCH 0/2] Make scheduling of the same index, the same
  • From: Luben Tuikov <ltuikov89@xxxxxxxxx>
• Re: [PATCH net] net: stmmac: update Rx clk divider for 10M SGMII
  • From: Vinod Koul <vkoul@xxxxxxxxxx>
• [PATCH net] net: stmmac: update Rx clk divider for 10M SGMII
  • From: Sneh Shah <quic_snehshah@xxxxxxxxxxx>
• Re: [PATCH 01/16] dt-bindings: arm: qcom: add SM8550 AIM300
  • From: Tengfei Fan <quic_tengfan@xxxxxxxxxxx>
• Re: [PATCH v5 09/10] phy: qualcomm: phy-qcom-qmp-ufs: Add High Speed Gear 5 support for SM8550
  • From: Can Guo <quic_cang@xxxxxxxxxxx>
• Re: [PATCH v5 00/20] remove I2C_CLASS_DDC support
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH net-next v3 3/3] net: stmmac: Add driver support for DWMAC5 fault IRQ Support
  • From: Andrew Lunn <andrew@xxxxxxx>
• Re: [PATCH net-next v3 0/3] Ethernet DWMAC5 fault IRQ support
  • From: Andrew Lunn <andrew@xxxxxxx>
• Re: [net-next RFC PATCH 03/14] dt-bindings: net: document ethernet PHY package nodes
  • From: Christian Marangi <ansuelsmth@xxxxxxxxx>
• [PATCH v2 20/21] pinctrl: starfive: Convert to use grp member
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v2 16/21] pinctrl: ingenic: Convert to use grp member
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v2 19/21] pinctrl: renesas: Convert to use grp member
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v2 18/21] pinctrl: mediatek: Convert to use grp member
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v2 15/21] pinctrl: imx: Convert to use grp member
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v2 21/21] pinctrl: core: Remove unused members from struct group_desc
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v2 17/21] pinctrl: keembay: Convert to use grp member
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v2 09/21] pinctrl: core: Add a convenient define PINCTRL_GROUP_DESC()
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v2 06/21] pinctrl: equilibrium: Convert to use struct pingroup
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v2 13/21] pinctrl: bcm: Convert to use grp member
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v2 14/21] pinctrl: equilibrium: Convert to use grp member
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v2 07/21] pinctrl: keembay: Convert to use struct pingroup
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v2 08/21] pinctrl: nuvoton: Convert to use struct pingroup and PINCTRL_PINGROUP()
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v2 11/21] pinctrl: mediatek: Make use of PINCTRL_GROUP_DESC()
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v2 05/21] pinctrl: core: Make pins const in struct group_desc
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v2 12/21] pinctrl: core: Embed struct pingroup into struct group_desc
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v2 10/21] pinctrl: ingenic: Make use of PINCTRL_GROUP_DESC()
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v2 02/21] pinctrl: qcom: lpass-lpi: Remove unused member in struct lpi_pingroup
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v2 00/21] pinctrl: Convert struct group_desc to use struct pingroup
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v2 04/21] pinctrl: imx: Use temporary variable to hold pins
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v2 01/21] pinctrl: qcom: lpass-lpi: Replace kernel.h with what is being used
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v2 03/21] pinctrl: equilibrium: Use temporary variable to hold pins
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [net-next RFC PATCH 03/14] dt-bindings: net: document ethernet PHY package nodes
  • From: Christian Marangi <ansuelsmth@xxxxxxxxx>
• Re: [PATCH 4/5] ASoC: codecs: Add WCD939x Soundwire slave driver
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH 3/5] ASoC: codec: wcd-mbhc-v2: add support when connected behind an USB-C audio mux
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: (subset) [PATCH v4 1/3] dt-bindings: mfd: qcom,spmi-pmic: Add pm8916 vm-bms and lbc
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: (subset) [PATCH v2 0/4] Add PM8937 PMIC support
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: [PATCH v2 00/18] mfd: Convert to platform remove callback returning void
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: [PATCH v4 6/6] arm64: dts: qcom: sm8350-lemonade(p): New devices
  • From: Nia Espera <nespera@xxxxxxxxxx>
• [PATCH v6 8/8] media: qcom: camss: Add sm8250 named power-domain support
  • From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
• [PATCH v6 6/8] media: qcom: camss: Flag VFE-lites to support more VFEs
  • From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
• [PATCH v6 7/8] media: qcom: camss: Flag CSID-lites to support more CSIDs
  • From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
• [PATCH v6 4/8] media: qcom: camss: Move VFE power-domain specifics into vfe.c
  • From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
• [PATCH v6 5/8] media: qcom: camss: Add support for named power-domains
  • From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
• [PATCH v6 3/8] media: qcom: camss: Use common VFE pm_domain_on/pm_domain_off where applicable
  • From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
• [PATCH v6 2/8] media: qcom: camss: Convert to per-VFE pointer for power-domain linkages
  • From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
• [PATCH v6 0/8] media: qcom: camss: Introduce support for named power-domains
  • From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
• [PATCH v6 1/8] media: qcom: camss: Flag which VFEs require a power-domain
  • From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
• Re: [PATCH net v2] net: ipa: fix one GSI register field width
  • From: patchwork-bot+netdevbpf@xxxxxxxxxx
• [PATCH v2 00/18] mfd: Convert to platform remove callback returning void
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• [PATCH v2 13/18] mfd: qcom-pm8xxx: Convert to platform remove callback returning void
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• Re: [PATCH V2 0/2] pmdomain: qcom: Update part number to X1E80100
  • From: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
• Re: [PATCH v3 0/3] cpufreq: qcom-nvmem: Fix power domain scaling
  • From: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
• Re: [PATCH v1 00/17] pinctrl: Convert struct group_desc to use struct pingroup
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v5 4/7] media: qcom: camss: Move VFE power-domain specifics into vfe.c
  • From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
• Re: [net-next RFC PATCH 03/14] dt-bindings: net: document ethernet PHY package nodes
  • From: Andrew Lunn <andrew@xxxxxxx>
• Re: [net-next RFC PATCH 03/14] dt-bindings: net: document ethernet PHY package nodes
  • From: Andrew Lunn <andrew@xxxxxxx>
• [PATCH 5/5] ASoC: codecs: Add WCD939x Codec driver
  • From: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
• [PATCH 4/5] ASoC: codecs: Add WCD939x Soundwire slave driver
  • From: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
• [PATCH 3/5] ASoC: codec: wcd-mbhc-v2: add support when connected behind an USB-C audio mux
  • From: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
• [PATCH 2/5] ASoC: dt-bindings: document WCD939x Audio Codec
  • From: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
• [PATCH 1/5] ASoC: dt-bindings: qcom,wcd938x: move out common properties
  • From: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
• [PATCH 0/5] ASoC: codecs: add support for WCD939x Codec
  • From: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
• Re: [net-next RFC PATCH 03/14] dt-bindings: net: document ethernet PHY package nodes
  • From: "Russell King (Oracle)" <linux@xxxxxxxxxxxxxxx>
• Re: [PATCH net-next v3 3/3] net: stmmac: Add driver support for DWMAC5 fault IRQ Support
  • From: Simon Horman <horms@xxxxxxxxxx>
• Re: [net-next RFC PATCH 03/14] dt-bindings: net: document ethernet PHY package nodes
  • From: Andrew Lunn <andrew@xxxxxxx>
• Re: [PATCH 00/18] mfd: Convert to platform remove callback returning void
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: [PATCH v5 3/3] arm64: dts: qcom: Add base qcs6490-rb3gen2 board dts
  • From: Komal Bajaj <quic_kbajaj@xxxxxxxxxxx>
• Re: [PATCH v5 3/3] arm64: dts: qcom: Add base qcs6490-rb3gen2 board dts
  • From: Komal Bajaj <quic_kbajaj@xxxxxxxxxxx>
• Re: [PATCH 00/18] mfd: Convert to platform remove callback returning void
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: [PATCH 1/6] dt-bindings: usb: dwc3: Clean up hs_phy_irq in bindings
  • From: Johan Hovold <johan@xxxxxxxxxx>
• Re: [PATCH v2 4/4] arm64: dts: qcom: sm8550: Enable download mode register write
  • From: Mukesh Ojha <quic_mojha@xxxxxxxxxxx>
• Re: [PATCH v5 2/3] arm64: dts: qcom: Add base qcm6490 idp board dts
  • From: Komal Bajaj <quic_kbajaj@xxxxxxxxxxx>
• Re: [PATCH v5 4/7] media: qcom: camss: Move VFE power-domain specifics into vfe.c
  • From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
• [PATCH V3 2/2] interconnect: qcom: Add X1E80100 interconnect provider driver
  • From: Sibi Sankar <quic_sibis@xxxxxxxxxxx>
• [PATCH V3 1/2] dt-bindings: interconnect: Add Qualcomm X1E80100 SoC
  • From: Sibi Sankar <quic_sibis@xxxxxxxxxxx>
• [PATCH V3 0/2] interconnect: qcom: Introduce interconnect drivers for X1E80100
  • From: Sibi Sankar <quic_sibis@xxxxxxxxxxx>
• Re: [PATCH v13 05/10] usb: dwc3: qcom: Refactor IRQ handling in QCOM Glue driver
  • From: Johan Hovold <johan@xxxxxxxxxx>
• Re: [PATCH v5 5/7] media: qcom: camss: Add support for named power-domains
  • From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
• [PATCH v2 2/2] interconnect: qcom: introduce RPMh Network-On-Chip Interconnect on SM8650 SoC
  • From: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
• [PATCH v2 1/2] dt-bindings: interconnect: document the RPMh Network-On-Chip Interconnect in Qualcomm SM8650 SoC
  • From: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
• [PATCH v2 0/2] interconnect: qcom: Introduce support for SM8650
  • From: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
• Re: [PATCH v3 2/8] arm64: dts: qcom: add initial SM8650 dtsi
  • From: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
• Re: [PATCH net-next v3 1/3] dt-bindings: net: qcom,ethqos: add binding doc for fault IRQ for sa8775p
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v5 09/10] phy: qualcomm: phy-qcom-qmp-ufs: Add High Speed Gear 5 support for SM8550
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH] arm64: dts: qcom: ipq8074: Add QUP4 SPI node
  • From: Robert Marko <robimarko@xxxxxxxxx>
• Re: [PATCH v5 4/7] media: qcom: camss: Move VFE power-domain specifics into vfe.c
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH net-next v3 1/3] dt-bindings: net: qcom,ethqos: add binding doc for fault IRQ for sa8775p
  • From: Suraj Jaiswal <quic_jsuraj@xxxxxxxxxxx>
• Re: [PATCH net-next v3 0/3] Ethernet DWMAC5 fault IRQ support
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH net-next v3 0/3] Ethernet DWMAC5 fault IRQ support
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH net-next v3 3/3] net: stmmac: Add driver support for DWMAC5 fault IRQ Support
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH v5 5/7] media: qcom: camss: Add support for named power-domains
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH V5 2/4] clk: qcom: branch: Add mem ops support for branch2 clocks
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH net-next v3 1/3] dt-bindings: net: qcom,ethqos: add binding doc for fault IRQ for sa8775p
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH net-next v3 3/3] net: stmmac: Add driver support for DWMAC5 fault IRQ Support
  • From: Suraj Jaiswal <quic_jsuraj@xxxxxxxxxxx>
• [PATCH net-next v3 2/3] arm64: dts: qcom: sa8775p: enable Fault IRQ
  • From: Suraj Jaiswal <quic_jsuraj@xxxxxxxxxxx>
• [PATCH net-next v3 1/3] dt-bindings: net: qcom,ethqos: add binding doc for fault IRQ for sa8775p
  • From: Suraj Jaiswal <quic_jsuraj@xxxxxxxxxxx>
• [PATCH net-next v3 0/3] Ethernet DWMAC5 fault IRQ support
  • From: Suraj Jaiswal <quic_jsuraj@xxxxxxxxxxx>
• Re: [PATCH] drm/msm/gpu: Fix null-pointer dereference in zap_shader_load_mdt
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [net-next RFC PATCH 12/14] dt-bindings: net: Document Qcom QCA807x PHY package
  • From: Robert Marko <robert.marko@xxxxxxxxxx>
• Re: [PATCH v1 02/17] pinctrl: nuvoton: Convert to use struct pingroup and PINCTRL_PINGROUP()
  • From: J. Neuschäfer <j.neuschaefer@xxxxxxx>
• Re: [PATCH v1 00/17] pinctrl: Convert struct group_desc to use struct pingroup
  • From: J. Neuschäfer <j.neuschaefer@xxxxxxx>
• Re: [PATCH 2/9] net: mdio: ipq4019: Enable the clocks for ipq5332 platform
  • From: Jie Luo <quic_luoj@xxxxxxxxxxx>
• Re: [net-next RFC PATCH 03/14] dt-bindings: net: document ethernet PHY package nodes
  • From: Christian Marangi <ansuelsmth@xxxxxxxxx>
• Re: (subset) [PATCH v2 1/4] dt-bindings: mfd: qcom,tcsr: Add compatible for sm8250/sm8350
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: [PATCH V2 2/2] pmdomain: qcom: rpmhpd: Update part number to X1E80100
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH V2 1/2] dt-bindings: power: rpmpd: Update part number to X1E80100
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [PATCH V2 2/2] pmdomain: qcom: rpmhpd: Update part number to X1E80100
  • From: Sibi Sankar <quic_sibis@xxxxxxxxxxx>
• [PATCH V2 1/2] dt-bindings: power: rpmpd: Update part number to X1E80100
  • From: Sibi Sankar <quic_sibis@xxxxxxxxxxx>
• [PATCH V2 0/2] pmdomain: qcom: Update part number to X1E80100
  • From: Sibi Sankar <quic_sibis@xxxxxxxxxxx>
• Re: [net-next RFC PATCH 12/14] dt-bindings: net: Document Qcom QCA807x PHY package
  • From: "Russell King (Oracle)" <linux@xxxxxxxxxxxxxxx>
• [PATCH v5 14/20] drivers/gpu/drm/msm/hdmi/hdmi_i2c.c: remove I2C_CLASS_DDC support
  • From: Heiner Kallweit <hkallweit1@xxxxxxxxx>
• [PATCH v5 00/20] remove I2C_CLASS_DDC support
  • From: Heiner Kallweit <hkallweit1@xxxxxxxxx>
• Re: [PATCH V2 1/2] dt-bindings: interconnect: Add Qualcomm X1E80100 SoC
  • From: Sibi Sankar <quic_sibis@xxxxxxxxxxx>
• Re: [PATCH 5/6] arm64: dts: qcom: Fix hs_phy_irq for SDM670/SDM845/SM6350
  • From: Krishna Kurapati PSSNV <quic_kriskura@xxxxxxxxxxx>
• [PATCH v5 02/10] scsi: ufs: ufs-qcom: No need to set hs_rate after ufshcd_init_host_param()
  • From: Can Guo <quic_cang@xxxxxxxxxxx>
• Re: [PATCH net-next 1/5] dt-bindings: net: qcom,ipa: add SM8550 compatible
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [PATCH v5 07/10] scsi: ufs: ufs-qcom: Set initial PHY gear to max HS gear for HW ver 5 and newer
  • From: Can Guo <quic_cang@xxxxxxxxxxx>
• Re: [PATCH v4 00/20] remove I2C_CLASS_DDC support
  • From: Thomas Zimmermann <tzimmermann@xxxxxxx>
• Re: [PATCH 5/6] arm64: dts: qcom: Fix hs_phy_irq for SDM670/SDM845/SM6350
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [PATCH v5 05/10] scsi: ufs: ufs-qcom: Allow the first init start with the maximum supported gear
  • From: Can Guo <quic_cang@xxxxxxxxxxx>
• [PATCH v5 10/10] scsi: ufs: ufs-qcom: Add support for UFS device version detection
  • From: Can Guo <quic_cang@xxxxxxxxxxx>
• [PATCH v5 09/10] phy: qualcomm: phy-qcom-qmp-ufs: Add High Speed Gear 5 support for SM8550
  • From: Can Guo <quic_cang@xxxxxxxxxxx>
• [PATCH v5 01/10] scsi: ufs: host: Rename structure ufs_dev_params to ufs_host_params
  • From: Can Guo <quic_cang@xxxxxxxxxxx>
• [PATCH v5 08/10] phy: qualcomm: phy-qcom-qmp-ufs: Rectify SM8550 UFS HS-G4 PHY Settings
  • From: Can Guo <quic_cang@xxxxxxxxxxx>
• [PATCH v5 06/10] scsi: ufs: ufs-qcom: Limit HS-G5 Rate-A to hosts with HW version 5
  • From: Can Guo <quic_cang@xxxxxxxxxxx>
• [PATCH v5 04/10] scsi: ufs: ufs-qcom: Limit negotiated gear to selected PHY gear
  • From: Can Guo <quic_cang@xxxxxxxxxxx>
• [PATCH v5 03/10] scsi: ufs: ufs-qcom: Setup host power mode during init
  • From: Can Guo <quic_cang@xxxxxxxxxxx>
• [PATCH v5 00/10] Enable HS-G5 support on SM8550
  • From: Can Guo <quic_cang@xxxxxxxxxxx>
• [PATCH v4 04/10] scsi: ufs: ufs-qcom: Limit negotiated gear to selected PHY gear
  • From: Can Guo <quic_cang@xxxxxxxxxxx>
• [PATCH v4 10/10] scsi: ufs: ufs-qcom: Add support for UFS device version detection
  • From: Can Guo <quic_cang@xxxxxxxxxxx>
• [PATCH v4 07/10] scsi: ufs: ufs-qcom: Set initial PHY gear to max HS gear for HW ver 5 and newer
  • From: Can Guo <quic_cang@xxxxxxxxxxx>
• [PATCH v4 05/10] scsi: ufs: ufs-qcom: Allow the first init start with the maximum supported gear
  • From: Can Guo <quic_cang@xxxxxxxxxxx>
• [PATCH v4 01/10] scsi: ufs: host: Rename structure ufs_dev_params to ufs_host_params
  • From: Can Guo <quic_cang@xxxxxxxxxxx>
• [PATCH v4 09/10] phy: qualcomm: phy-qcom-qmp-ufs: Add High Speed Gear 5 support for SM8550
  • From: Can Guo <quic_cang@xxxxxxxxxxx>
• [PATCH v4 08/10] phy: qualcomm: phy-qcom-qmp-ufs: Rectify SM8550 UFS HS-G4 PHY Settings
  • From: Can Guo <quic_cang@xxxxxxxxxxx>
• [PATCH v4 06/10] scsi: ufs: ufs-qcom: Limit HS-G5 Rate-A to hosts with HW version 5
  • From: Can Guo <quic_cang@xxxxxxxxxxx>
• [PATCH v4 03/10] scsi: ufs: ufs-qcom: Setup host power mode during init
  • From: Can Guo <quic_cang@xxxxxxxxxxx>
• [PATCH v4 02/10] scsi: ufs: ufs-qcom: No need to set hs_rate after ufshcd_init_host_param()
  • From: Can Guo <quic_cang@xxxxxxxxxxx>
• Re: [PATCH v4 00/20] remove I2C_CLASS_DDC support
  • From: Heiner Kallweit <hkallweit1@xxxxxxxxx>
• Re: [PATCH v4 00/20] remove I2C_CLASS_DDC support
  • From: Thomas Zimmermann <tzimmermann@xxxxxxx>
• Re: [PATCH 1/6] dt-bindings: usb: dwc3: Clean up hs_phy_irq in bindings
  • From: Krishna Kurapati PSSNV <quic_kriskura@xxxxxxxxxxx>
• Re: [PATCH 1/6] dt-bindings: usb: dwc3: Clean up hs_phy_irq in bindings
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH 1/6] dt-bindings: usb: dwc3: Clean up hs_phy_irq in bindings
  • From: Krishna Kurapati PSSNV <quic_kriskura@xxxxxxxxxxx>
• Re: [PATCH 1/6] dt-bindings: usb: dwc3: Clean up hs_phy_irq in bindings
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v3 0/3] cpufreq: qcom-nvmem: Fix power domain scaling
  • From: Viresh Kumar <viresh.kumar@xxxxxxxxxx>
• Re: [PATCH 6/6] arm64: dts: qcom: Add missing interrupts for qcs404/ipq5332
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH] dt-bindings: reset: qcom: drop unneeded quotes
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH 1/2] soundwire: qcom: drop unneeded qcom_swrm_stream_alloc_ports() cleanup
  • From: Vinod Koul <vkoul@xxxxxxxxxx>
• Re: [PATCH v4 00/20] remove I2C_CLASS_DDC support
  • From: Heiner Kallweit <hkallweit1@xxxxxxxxx>
• Re: [PATCH v2 7/9] clk: qcom: add NSS clock Controller driver for Qualcomm IPQ5332
  • From: Kathiravan Thirumoorthy <quic_kathirav@xxxxxxxxxxx>
• Re: [PATCH v2 8/9] arm64: dts: qcom: ipq5332: add support for the NSSCC
  • From: Kathiravan Thirumoorthy <quic_kathirav@xxxxxxxxxxx>
• Re: [PATCH v4 00/20] remove I2C_CLASS_DDC support
  • From: Thomas Zimmermann <tzimmermann@xxxxxxx>
• [PATCH V5 3/4] clk: qcom: Add ECPRICC driver support for QDU1000 and QRU1000
  • From: Imran Shaik <quic_imrashai@xxxxxxxxxxx>
• [PATCH V5 4/4] arm64: dts: qcom: qdu1000: Add ECPRI clock controller
  • From: Imran Shaik <quic_imrashai@xxxxxxxxxxx>
• [PATCH V5 1/4] dt-bindings: clock: qcom: Add ECPRICC clocks for QDU1000 and QRU1000
  • From: Imran Shaik <quic_imrashai@xxxxxxxxxxx>
• [PATCH V5 2/4] clk: qcom: branch: Add mem ops support for branch2 clocks
  • From: Imran Shaik <quic_imrashai@xxxxxxxxxxx>
• [PATCH V5 0/4] Add support for Qualcomm ECPRI clock controller
  • From: Imran Shaik <quic_imrashai@xxxxxxxxxxx>
• Re: [PATCH V4 2/4] clk: qcom: branch: Add mem ops support for branch2 clocks
  • From: Imran Shaik <quic_imrashai@xxxxxxxxxxx>
• [PATCH] drm/msm/gpu: Fix null-pointer dereference in zap_shader_load_mdt
  • From: Kunwu Chan <chentao@xxxxxxxxxx>
• Re: [net-next RFC PATCH 03/14] dt-bindings: net: document ethernet PHY package nodes
  • From: Andrew Lunn <andrew@xxxxxxx>
• Re: [PATCH v1 01/17] pinctrl: equilibrium: Convert to use struct pingroup
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [PATCH v1 08/17] pinctrl: core: Embed struct pingroup into struct group_desc
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [PATCH v1 01/17] pinctrl: equilibrium: Convert to use struct pingroup
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [net-next RFC PATCH 11/14] dt-bindings: net: add QCA807x PHY defines
  • From: Andrew Lunn <andrew@xxxxxxx>
• Re: [net-next RFC PATCH 13/14] net: phy: add Qualcom QCA807x driver
  • From: Andrew Lunn <andrew@xxxxxxx>
• Re: [PATCH 10/11] arm64: dts: qcom: sm8150: fix USB wakeup interrupt types
  • From: Jack Pham <quic_jackp@xxxxxxxxxxx>
• Re: [net-next RFC PATCH 12/14] dt-bindings: net: Document Qcom QCA807x PHY package
  • From: Andrew Lunn <andrew@xxxxxxx>
• [PATCH net v2] net: ipa: fix one GSI register field width
  • From: Alex Elder <elder@xxxxxxxxxx>
• [PATCH net-next 5/5] net: ipa: add IPA v5.5 configuration data
  • From: Alex Elder <elder@xxxxxxxxxx>
• [PATCH net-next 4/5] net: ipa: add IPA v5.5 register definitions
  • From: Alex Elder <elder@xxxxxxxxxx>
• [PATCH net-next 3/5] net: ipa: prepare for IPA v5.5
  • From: Alex Elder <elder@xxxxxxxxxx>
• [PATCH net-next 2/5] net: ipa: update IPA version comments in "ipa_reg.h"
  • From: Alex Elder <elder@xxxxxxxxxx>
• [PATCH net-next 1/5] dt-bindings: net: qcom,ipa: add SM8550 compatible
  • From: Alex Elder <elder@xxxxxxxxxx>
• [PATCH net-next 0/5] net: ipa: add IPA v5.5 support
  • From: Alex Elder <elder@xxxxxxxxxx>
• [PATCH] dt-bindings: reset: qcom: drop unneeded quotes
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH net] net: ipa: fix one GSI register field width
  • From: Alex Elder <elder@xxxxxxxxxx>
• Re: [PATCH net-next 08/10] net: wwan: qcom_bam_dmux: Convert to platform remove callback returning void
  • From: Sergey Ryazanov <ryazanov.s.a@xxxxxxxxx>
• Re: [PATCH v2 1/1] drm/msm/adreno: Add support for SM7150 SoC machine
  • From: Danila Tikhonov <danila@xxxxxxxxxxx>
• [PATCH net] net: ipa: fix one GSI register field width
  • From: Alex Elder <elder@xxxxxxxxxx>
• Re: [net-next RFC PATCH 04/14] net: phy: add initial support for PHY package in DT
  • From: Simon Horman <horms@xxxxxxxxxx>
• Re: [PATCH v5 5/7] media: qcom: camss: Add support for named power-domains
  • From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
• Re: [PATCH v2 1/1] drm/msm/adreno: Add support for SM7150 SoC machine
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH 1/6] dt-bindings: usb: dwc3: Clean up hs_phy_irq in bindings
  • From: Marijn Suijten <marijn.suijten@xxxxxxxxxxxxxx>
• Re: [PATCH 4/9] net: mdio: ipq4019: configure CMN PLL clock for ipq5332
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH v2 5/9] clk: qcom: ipq5332: add gpll0_out_aux clock
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH v2 8/9] arm64: dts: qcom: ipq5332: add support for the NSSCC
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH v2 7/9] clk: qcom: add NSS clock Controller driver for Qualcomm IPQ5332
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH v4 6/6] arm64: dts: qcom: sm8350-lemonade(p): New devices
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH V4 2/4] clk: qcom: branch: Add mem ops support for branch2 clocks
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH v2 8/8] arm64: dts: qcom: Add support for Xiaomi Redmi Note 9S
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH v2 7/8] arm64: dts: qcom: sm7125-xiaomi-common: Add UFS nodes
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH v2 6/8] arm64: dts: qcom: sc7180: Add UFS nodes
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH v2 5/8] phy: qcom: qmp-ufs: Add SC7180 support
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH V2 4/4] clk: qcom: videocc-sm8150: Add runtime PM support
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH V2 2/4] clk: qcom: videocc-sm8150: Update the videocc resets
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH 2/2] soundwire: qcom: move sconfig in qcom_swrm_stream_alloc_ports() out of critical section
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH 1/2] soundwire: qcom: drop unneeded qcom_swrm_stream_alloc_ports() cleanup
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH v5 5/7] media: qcom: camss: Add support for named power-domains
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH v3 7/8] arm64: dts: qcom: sm8650-mtp: add interconnect dependent device nodes
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH 01/16] dt-bindings: arm: qcom: add SM8550 AIM300
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH v13 05/10] usb: dwc3: qcom: Refactor IRQ handling in QCOM Glue driver
  • From: Krishna Kurapati PSSNV <quic_kriskura@xxxxxxxxxxx>
• Re: [PATCH v4 2/3] arm64: dts: qcom: pm8916: Add BMS and charger
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH 6/6] arm64: dts: qcom: Add missing interrupts for qcs404/ipq5332
  • From: Krishna Kurapati <quic_kriskura@xxxxxxxxxxx>
• [PATCH 5/6] arm64: dts: qcom: Fix hs_phy_irq for SDM670/SDM845/SM6350
  • From: Krishna Kurapati <quic_kriskura@xxxxxxxxxxx>
• [PATCH 4/6] arm64: dts: qcom: Fix hs_phy_irq for non-QUSB2 targets
  • From: Krishna Kurapati <quic_kriskura@xxxxxxxxxxx>
• [PATCH 3/6] arm64: dts: qcom: Fix hs_phy_irq for QUSB2 targets
  • From: Krishna Kurapati <quic_kriskura@xxxxxxxxxxx>
• [PATCH 2/6] usb: dwc3: qcom: Rename hs_phy_irq to qusb2_phy_irq
  • From: Krishna Kurapati <quic_kriskura@xxxxxxxxxxx>
• [PATCH 1/6] dt-bindings: usb: dwc3: Clean up hs_phy_irq in bindings
  • From: Krishna Kurapati <quic_kriskura@xxxxxxxxxxx>
• [PATCH 0/6] Refine USB interrupt vectors on Qualcomm platforms
  • From: Krishna Kurapati <quic_kriskura@xxxxxxxxxxx>
• Re: [PATCH 1/2] dt-bindings: phy: qcom,sc8280xp-qmp-usb3-uni: Add X1E80100 USB PHY binding
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v6 0/6] drm: simplify support for transparent DRM bridges
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [net-next RFC PATCH 03/14] dt-bindings: net: document ethernet PHY package nodes
  • From: Christian Marangi <ansuelsmth@xxxxxxxxx>
• Re: [PATCH v6 2/7] dt-bindings: leds: leds-qcom-lpg: Add support for LPG PPG
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [net-next RFC PATCH 04/14] net: phy: add initial support for PHY package in DT
  • From: Christian Marangi <ansuelsmth@xxxxxxxxx>
• Re: [v6,1/6] drm/bridge: add transparent bridge helper
  • From: Sui Jingfeng <sui.jingfeng@xxxxxxxxx>
• Re: [PATCH v3 02/12] qcom_scm: scm call for deriving a software secret
  • From: Trilok Soni <quic_tsoni@xxxxxxxxxxx>
• Re: [PATCH 4/6] arm64: dts: qcom: sm6115: align mem timer size cells with bindings
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH v1 01/17] pinctrl: equilibrium: Convert to use struct pingroup
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v1 00/17] pinctrl: Convert struct group_desc to use struct pingroup
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v1 09/17] pinctrl: bcm: Convert to use grp member
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v1 06/17] pinctrl: ingenic: Make use of PINCTRL_GROUP_DESC()
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v1 14/17] pinctrl: mediatek: Convert to use grp member
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v1 08/17] pinctrl: core: Embed struct pingroup into struct group_desc
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>